Military Engineer Services Tender

Returning ,filling in including spreading levelling watering and well ramming in layers not exc 25cm thick in soil in any depth complete all as specified and directed.

M&L Spreading and levelling in layers n exc. 25 cm thick complete all as specified and directed.complete all as specified and directed.

Removing excavated soil/ materials to a distance not exc 250 mtr but n.exc and depositing where directed at a level not exceeding 1.50 m above the starting point complete all as specified and directed.

M & L for Cement concrete in foundations, filling and mass concrete using type C2 1:3:6 (using 40 mm gradaed aggregate) complete all as specified and directed.

M & L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Cement concrete type B-1,1:2:4 (using 20mm graded aggregate) 75 mm thick complete all as specified and directed.

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L TMT steel bard Gde 500 D, 5 mm dia and over upto including 10 mm dia as in stirupps, spacers and binders reinforcement cut to length, bent to shape required including cranking, bending, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M & L Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M & L Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed.

M & L Form work to sides of pillars, posts, struts, piers, columns and stanchions. Square,Rectangle or Polygon complete all as specified and directed.

M & L for RCC, M-30 (using 20mm graded aggregates) in foundation, including rafts, footings, foundation beams, plinthbeams, bases for columns, etc, basement slab, under rimmed piles and mass concrete complete all as specified and directed.

M & L for RCC, M-30 (using 20mm graded aggregates) beams, cantilevers, bressumers, lintel over 1.5 mt span complete all as specified and directed.

M & L for RCC, M-30 (using 20mm graded aggregates) column, pillars, piers, posts and struts complete all as specified and directed.

M&L for precast concrete block masonary with PCC solid blocks in (1:2:4), type B1 (using 20mm graded stone aggregate) exceeding 10cm in width andsetting in Cm (1:4) complete all as specified and directed.

M&L for 15 mm rendering in two layers with 10 mm with CM 1:6 & 5 mm thick with CM (1:4) with using water proffing compound on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. (Note: WPC paid seprately.)

Supply only Water Proofing compound complete all as specified and as directed.

M & L for rendering 10mm thick in cement mortar 1:6 on Block/Brick masonry surfaces of internal wall finished even and smooth complete all as specified and as directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces with smart painting toolscomplete all as specified and as directed.

M & L for applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth complete all as specified and directed.

M & L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion, white or tinted over a coat of primer surfaces of wall complete all as specified and directed.

S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and directed.

M & L preparation of new steel suraface of any description over 10 cm width or girth not otherwise described and apply two coats of synthetic enamel paint complete all as specified and directed.

M & L for Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290 Gde-E-165 complete all as specified and directed.

Supply & fix rolled mild steel in joist, angle ,channel as in purlins, rafters cleats etc conforming to Fe-410- W (Gde-E-250)quality A complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge / roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Preparation newly or previously untreated steel surfaces of any description over 10cm width or girth and painting with two coats of synthetic enamel paint over and including a coat of red oxide complete all as specified and directed.

Providing ,supplying and fixing Modular false Ceiling with USG KNAUF PVC Laminated Gypsum Tile white Sand 7 mm with aluminium foil Back 595X595 mm SQ Edge on true line Suspended with USGKNAUF Unilite GI Powder coated Plain White 32x24 mm T Grid System with all necessary accessories as per drawing complete all as specified and directed.

Supply, install, testing and commissioning of Full automatic organic waste composting machine of capacity 300Kg/day using input of food waste.,garden waste, all type of organic waste having output of otganic Bio fertiliser made of SS-304 , High temp based Microbes supporting composting, including foundation complete all as specified & directed. Note:Contarctor should submitt SLD of plant, electrical network before instllation of plnat from Enginner-in-charge .

Supply, install, testing and commissioning of Full automatic shredder machine of capacity 300Kg/day using input of food waste.,garden waste, all type of organic waste having output of 8-10mm output of input material, High temp based Microbes supporting composting complete including foundation complete all as specified & directed. Note:Contarctor should submitt SLD of plant, electrical network before instllation of plnat from Enginner-in-charge .

Supply, install, testing and commissioning of Balling machine of capacity 15 Ton/hr using input of Compact & balling plastic waste such as bottles and plastic packets complete foundation all as specified & directed. Note:Contarctor should submitt SLD of plant, electrical network before instllation of plnat from Enginner-in-charge .

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth strip 32 x 6 mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

M&L for point wiring with using 1.5 Sqmm (nominal area) with multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade , ISI -694 marked with valid CML No in and including medium grade, PVC concealed conduit of any thickness of dia not less than 20 mm and conduit accessories, ISI marked with valid CML no (IS-9537-19 for conduit and IS :3419:19765 for conduit accessories )concealed in wall with mild steel/ pressed steel modular sunken box (with earth dolly) of 1.6mm thick of suitable size, duly painted with two coats of anti corrosive paint/aluminium paint over a coat of red oxide primer externally covered with modular cover and plate for fixing of modular switch,socket etc including PVC insulated multi stranded copper conductor to commom earth and connecting to earth dolly complete all as specfied and dircted for the following:- NOTE :- 1. The complete wiring installation shall be carried out in accordance and conformity with IS 732:1989 "code of practise for electrical wiring(latest version). 2. The unit rate aganist item of PVC concealed conduit point wiring includes for MS pressed steel sunken box for modular wiring GI sunken box duly painted with two coats of anti corrosive paint/black bituminous paint externally and two coated of aluminium paint over a coat of red oxideprimer internally for fixing switches,regulator, socket outlet etc with modular plate & box ISIS marked. 3.All screws,fasteners ,bolts,nuts & washer etc shall be of cadmium plated, The cost of which deemed to be included in the unit rate. 4.The complete wiring installtions shall be tested on completion as specfied in particular specfications. 5.The cutting/leaving , forming chases shall be done with electric cutter. 6.Cutting chases in stone masonry wherever shall be deemed to be included in unit rate. 7.The completed wiring Quoted rate shall be deemed to include the making good the disturbed surface for concealed with CM 1:4 cement motor including finishing the surface to match with the existing surface. 8. Fittings like modular switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'.

One light/buzzer/fan point controlled by one; one way switch complete all as specified and directed.

One 3 pin socket out let 5 amp (independent) point controlled by one; one way switch complete all as specified and directed.

One 3 pin socket out let 5 amp point on the (same board) with other switches complete all as specified and directed.

All as per item No.37 here-in-before but with 2.5sq mm size FRLS single core pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor and 2.5sqmm PVC insulated and unsheathed cable 1100 volts grade with multistrand copper conductor as earth wire for 3 pin socket outlet 15 amp on independent board.(only one point per circuit)

Supply and fix ceiling rose surface bakelite , three terminals, 230V AC with polycarbonate body complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix socket modular , 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed.

Supply and fix in repair modular fan regulator 120 W 2 module complete all as specified and directed.

Supply & fix earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts complete all as specified and directed.

Supply and fix lamp holder PVC / Polycarbonate type suitable for LED lamp fitting including LED 9 Watt bulb complete all as specified and directed.

Supply and fix in repair LED 20 W high quality indoor batten type tube light fitting with PC housing and as well light application , electrical connection of three core 0.5 sqmm copper flexible connection from ceiling rose to tube light fitting and with proper square box for fitting of tube light fitting complete all as specified and directed.

S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed.

Supplying and fixing sheet metal enclosure powder painted for MCB DB vertical type TPN 4 way double door with dinrail and busbar with IP-43 protection with door earthing and isolated neutral bar and insulated busbar assembly including MCCB of 100 Amps complete all as specified and directed.

Supply & Fixing MCB TPN, 63 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Supply & Fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed

M & L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC concealed conduit in stone masonry/brick masonry including accessaries with 6sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up complete all as specified and directed. (Note: 2 runs of cable and one run earth wire and concealed PVC conduit will be measured as one length)

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. (NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’)

M&L for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts, (Earthed) grade cross sectional area 95 sq. mm 3 core in pipe /trench /cable duct /fixed on wall by proper size shaped GI clamps with nut bolts etc and making good the disturbed surfaces complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, PVC bedded, galvanized steel strip or wire armoured of size 3.5 C 70Sqmm, electric power cables (heavy duty) with stranded aluminium, 1100 volts grade (Earthed) complete all as specified and as directed.

Supply, laying and testing cable XLPE insulated, PVC bedded, galvanized steel strip or wire armoured of size 4C 25 Sqmm, electric power cables (heavy duty) with stranded aluminium, 1100 volts grade (Earthed), complete all as specified and directed.

M & L for cable jointing kit for 11 kV (earthed) grade cable for outdoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core, 95 SQ MM, XLPE insulated, armoured aluminium conductor cable complete all as specified and directed.

Supply, installation, testing and commissioning of 11 KV 200 Amps triple pole gang operated air break switch having 12 Nos FRP insulator with earthing switch rotating type for horizontal or vertical operation mechanically operated 3 rows type mounted on FRP insulators (including insulators) and steel frame with operating mechanism consisting of operating rod of 25mm bore medium grade GI pipe of suitable length to operated from ground level including locking arrengment with pad lock with three Nos of keys including 11 KV swing out expulsion fuses (drop out type) of 10 Amps complete all as specified and as directed.

Supply, install, testing and commissioning lightening arrestor (station type) outdoor nominall discharge current 65 KA, 11 KV including clamps, nuts, bolts and washers and connecting to earth with 32x6 mm GI strip complete all as specified and as directed.

Supply, installation, testing and commisioning of stepdown transformer, outdoor type, HT 11 kV, 3-Phase, LT 0.433 kV, 50 Hz, 3-Phase, 4- Wire, oil-cooled, including of first fill of transformer oil of dielectric strength not less than 50 kV, electrolyte grade, copper wound in accordance with vector group DYN 11 with neutral brought out on LV side complete with all standard fittings, all as specified and of capacity 63 KVA, Level -2 mounted on a suitable platform as per TD of HQ cE JZ with following technical features: [i] Rating: HV- 11 kV , LV- 433 V [ii] Winding connections- HV-Delta, LV-Star [iv] Insulation: Class 'H' [v] Applicable Standards: IS: 1180 (PART-1 2014) [vi] Termination: HV & LV cable box for easy connection. [vii] Duty: Distribution Transformer. [viii] Noise Level: Less than 69 dB at 1 m NOTES: [i] Contractor shall submit the technical drawing, constructional drawings, safety features drawing etc. for approval of accepting officer. [ii] The contractor shall intimate for factory inspection for routine tests as per IS & ANSIC57.12.90 (latest revision) in the OEM factory in presence of representative nominated by the accepting officer before dispatch from factory, tests after installation shall also be carried by SEI for which GE will intimate through proper channel.

Supplying, install and errect in true vertical positionpressed concrete poles of 11.00 mtr long having 152mm x 152mm at top and 152mm x 260mm at bottom class 9 poles complete bolts, nuts & screws as specified type, painting and marking alternate white and black strip 30cm height, painting pole number, letters/figures by black paint complete all as specified and directed

M&L for supply, install, connecting and commissioning of CPRI approved main LT distribution panel board outdoor type, KIOSK Type, double door, both side openable including loking arrangement with sliding door bolt , cubical type, 3 phase, 4wire, 415V, factory made free standing, angle iron 50x50x6mm base frame, dust and vermin proof, cubical type, 3.15 mm thick CRCA sheet steel for load bearing and 2 mm thick for non load bearing, with anticorrosive coating and finally epoxy polyster powder coating of grey shade fully compartmentalised design etc and comprising of the following. INCOMING (a) 4 Nos bus bar of equal size made by aluminium conductor with PVC insulated coloured heat shrinkabal type sleeves suitable size of 300 Amps mounted on non cracking resin type insulator - 1 Set with suitable capacity of CT's , KWH digital multimeter , digital Ammeter , digital volt meter , frequincy meter, selector switch and indication lamp, LED Indication lamps for ON, OFF &RYB, etc. (b) MCCB 200A Amps three phase , 415 Volt manual operated type with 4 pole microprocessar based breacking capacity / making capacity 16KA short time current icw KA 1 sec - 01 No. OUTGOING (a) MCCB ,100A Amps,16 kA at 433V Microprocessor Type with adjustable O/L,S/C, 4 Pole- 02Nos(outgoing) (b) MCCB ,100 Amps,16 KA at 433V Microprocessor Type with adjustable O/L,S/C, 4 Pole- 01 Nos(spare)

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth strip 32 x 6 mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron lead of 4 mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in any tupe of soil complete all as specified & directed.

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m in depth and not exceeding 3.0m depth for foundation, laying of cable/pipe etc or for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified & directed.

Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type 1, flat as per size 250mm x 150mm x 40mm for LT cable and laid dry in trenches over underground cables complete all as specified and directed.

Supplying and laying un-reinforced precast concrete cable cover, Class HV, Type 1, flat as per size 300mm x 180mm x 40mm for LT cable and laid dry in trenches over underground cables complete all as specified and directed.

M & L for PCC 1:2:4 type B-1 using 20 mm graded aggregates as in copings, kneelers, apex stones, bed plates, kerbs etc., water troughs and the like including weathering, slightly rounded for chamfered angles and throating including necessary form work complete all as specified and as directed.

M & L for loose filling with graded stone aggregates (granite) 40 to 80 mm spread thickness 150 mm for outdoor transformer complete all as specified and directed.

M&L for cross arms bracings, supports, clamps andback plates fabricated from structural steel sections incl nut & bolts , washers welding, bending cold or hot drilling holes for bolts, washers in any shape of size complete all as specified and directed.

M & L Anti climbing device,spike type fabricated out of MS bars (round,square and flat) including nuts,bolts,washers and welding in two halves made to shape to suit the cross section of the pole complete all as specified and directed.

M&L for sand cushioning in trenches for protection of LT under ground cable including watering and consolidation complete all as specified and directed.

Supply and laying 100 mm bore galvanized steel tubing, heavy grade, with all fittings laid in trenches / road / etc complete as all specified and directed.