Military Engineer Services Tender

M&L Bituminous premixed semi dense asphaltic concrete (SDAC) 30mm thick consolidated thickness with 5.5 % paving bitumen (VG-30) as binder content by weight of total mix, using hot mix plant and mechanical paver a approved by GE, rolled and compacted with 8 to 10 tonne Vibrator Power Roller to required gradient and camber, complete all as specified and as directed. Note : (i) Job mix formula for the semi dense asphaltic concrete shall be got tested from the institutes specified in the particular specifications. (ii) Mix shall be obtained from hot mix plant and spreading shall be done by using mechanical paver. (iii) In case as per actual design mix, the binder content by weight of total mix is less than 5.5%, price adjustment shall be made as per average rate of all the purchase vouchers for bitumen pertaining to the work under this contract. If total binder content as per design mix is more than 5.5%, no price adjustment shall be made for the same complete all as specified and directed

M&L Preparing bituminous surfaces of road and marking 2mm thick centre line, stop line, dashes, arrows, brackets etc. and the like n exc 10cm wide on roads pavements with hot applied thermoplastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturer's instruction complete all as specified and directed

S&F Cat eye solar reflective type of metal body alloy of size 100mmx100mmx20mm with PAMA striplen reflector of Model DA 972.0 fixed with suitable size MS stud as per manufacturer's instructions complete all as specified

S&F Solar cat eye aluminium alloy (100% water proofing design according to BIS of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono crystaline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd complete as per manufacturer's instructions etc. all as specified and directed

S&F Metal tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermoplastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed