Military Engineer Services Tender

Lump sum price worked out by the Contractor for Internal Water Supply as listed inSch `A’ Part III

Lump sum price worked out by the Contractor for Internal electrification as listed in Sch 'A' Part IV

Lump sum price worked out by the Contractor for Road/Path/Culvert as listed in Sch 'A' Part V

Lump sum price worked out by the Contractor for Sewage Disposal as listed in Sch `A’ Part VI.

Lump sum price worked out by the Contractor for External Water Supplyas listed in Sch `A’ Part VII

Lump sum price worked out by the Contractor for External Electrification as listed in Sch `A’ Part VIII

Lump sum price worked out by the Contractor for Fire Fighting as listed in Sch `A’ Part IX.

Lump sum price worked out by the Contractor for Demolition and Dismantling as listed in Sch `A’ Part X.

SCHEDULE 'A' PART - XI (MISC ITEMS) (Note: The contractor shall quote his rate for each of these items separately. The estimated rate is left blank since the same is not prepriced by MES)

DEMOLITION DISMANTLING

Taking out sheathed and PVC insulated, armoured multistaranded XLPE UG cable of any size by excavation in any type of soil and removing and depositing the cable where directed for taking schedule of credit complete all as specified and directed.

Taking down any type of sub main wiring complete, including fixture and fitting such as DB's, MCB's, industrial sockets etc. removing the materials for taking credit complete all as specified and directed.

Dismanteling & taking down Exhaust fan, energy meter and Geyser including connected items from installed site, transporting to MES store yard and depositing to MES carefully without damaging any part or body complete all as specified and directed.

Taking down earthing with galvanised iron earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground, removing for taking credit (Credit for above items should be made as per conditions seperately) complete all as specified and directed.

Taking out old GI tubing from excavted trenches, wall etc for the size up to 80 mm complete all as specified and directed.

Taking out old PVC (SWR) pipe with fittings any dia from excavted trenches, wall etc complete all as specified and directed.

Taking out old water supply fixtures like bib taps, valves flushing tanks etc of any size complete all as specified and directed.

Taking out old WHB, WC, plate racks, sinks etc complete all as specified and directed.

Taking out old Distribution boards of any size complete all as specified and directed.

Taking out old MCBs of any size complete all as specified and directed.

EXTERNAL WATER SUPPLY

Material and labour for construction of value chamber of size 1050mm x 750mm x 1000mm deep dimensions (Over all internal dimension) for sluice valve etc with PCC foundation. PCC block masonry walls. Plastering. PCC Coping. White washing, mild steel chamber cover. painting to chamber cover including excavation and earth work in any type of soil complete all as shown on drawing No. CEAA/TD/57 Sheet 1.1 complete all as specified and directed. Note:- Complete specification for valve pit chamber as specified in particular specificationshall be followed, if any details shown on drawing but not specified in PS the same shall be followed as per drawing.

M&L for cutting of existing CI/DI distribution main 150mm bore pipe, in position, for insertion of 01 nos tee of suitable size (150mm x 150mm x 80mm) all end flanged including all necessary fittings such as union, socket etc and jointing with rubber gasket, complete all as specified and directed.

EXTERNAL ELECTRIFICATION

Supply, installation testing and commisoining out door type Cubical LT Panel pedastal mounted, factory made power coated CPRI approved conforming to relevant IS of suitable size using CRCA sheet 3.00mm thick titly enclosed dust and virm proof (protection class IP 540 opening with locking arrangement made of angle iron frame work 40 x 40 x 6mm duly painted over a coat of red oxide primer including necessary foundation bolts, PCC (1:2:4) type B-1 platform of suitable size for mounting the panel, suitable for 415 Volts, 50Hz, three phase, 4wire systerm with suitable insulated copper busbar or capacity not less than 400Amps and shall be complete with internal wiring with copper conductor complete all as specified and directed with the following : (A) INCOMING :- (a) MCCB TPN (4 pole), 100 Amps 415 volts, 50 Hz, rupturing capacity 35 KA-01 Nos. (b) Voltmeter digital square type 0.500 V with selecter switch- 01 Nos. (c) Ammeter digital square type 0.200 Amps with selecter switch including set of diacast cts of suitable ration complete-01 No (d) Phase Indicator lamp 03 Nos (RYB) (B) OUTGOING :- (a) MCCB TPN , 63 Amps 415 volts, 50 Hz, rupturing capacity 35 KA-03 Nos. (b)Digital Ammeter of capacity 0-100 Amps with selector switch-01 No (d) Indicator lamp 01 Nos (RYB) Note : The quoted rate include the following (i) PCC 1:2:4 for grouting (ii) Excavation and earth work (iii) Necessarty lugs for cable fitment (iv) FRLS copper conductor cable of suitable size shall be used for control wiring for LT panel complete for incoming/ outgoing.

Supply, install, testing and commissioning of factory made LT feeder pillar box (KIOSK) indoor type, platform mounted, including suitable angle iron (4 Nos leg) for 415 volts, 3 phase, 4 wire, 50 Hz, AC supply system having bus bar chamber with insulated copper bus bus bars 200 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof, made of 2.00mm CRCA sheet 50mm x 40mm thick angle iron frame duly powder coated finish, thimbling and cable entry boxex with cable gland including painting with two coats of synthetic enamel paint over a coat of red oxide primer, front and back side opening tpye with aprons for cable entry with double dorr shutter and locking arrangement, danger plate and earthing terminal and suitable PCC work. The panel shall comprise of the following :- (A) INCOMING :- (i) MCCB TPN (4 pole), 125 Amps, 415 volts, 50 Hz, rupturing capacity 36 KA-01 Nos(From proposed commercial panel) (ii) Bus bar copper strip 200 Amps, 4 Pole (iii) Digital panel meter (Amp, voltage meter) incl CTs-01 No (iv) LED indication lamps-03 Nos (B) OUTGOING :- (i) MCB SPN 40 Amps, 230 V, 50 Hz-10 Nos (ii) Slot for electronic energy meter -08 Nos Note : The quoted rate include the following :- (i) Necessarty lugs for cable fitment (ii) FRLS copper conductor cable of suitable size shall be used for control wiring for LT panel complete for incoming/ outgoing.

M&L cutting the existing road/hard standing surface to a depth of 70mm and 50 mm width and getting out for laying underground pipe including returning filling in watering well ramming in layers not exceeding 25 cm in soil and filling the same with PCC 1:2:4 type B1 using 20mm graded stone aggregate and finishing even and smooth without using extra cement including removing of surplus soil out side out side MD land complete all as specified & directed.

FIRE FIGTHING

Supply and fix 4 kg capacity dry chemical powder (ABC) type fire extinguisher conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket/ floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed.

Supply and fix 3 kg light-weight squeeze grip CO2 type fire extinguisher, conforming to IS 15683: 2006, with CO2 gas filled in brand new seamless cylinder with powder coated finish, made out of Manganese steel with wheel type valve, discharge nozzle, bend and horn, wall mounting bracket/ floor trolley mounting accessories along with suitable signage complete all as specified and directed.

Supply and fix 9 litre mechanical foam type fire extinguisher, conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted with gunmetal union, high pressure CO2 gas cartridge, hose and ABS type branch pipe and wall mounting bracket/ floor trolley mounting accessories along with suitable signage complete all as specified and directed.

Supply and fix 9 kg capacity dry chemical powder (ABC) type fire extinguisher (1 No. at entry/ exit), conforming to IS 15683: 2006, with initial filling in brand new cylinder with powder coated finish, fitted in gunmetal union, high pressure CO2 gas cartridge, discharge hose, wall mounting bracket/ floor trolley mounting accessories along with suitable signage, etc. complete all as specified and directed.

Supply and fix PN 1.6 rated 80 mm NB cast iron 'Y' type strainer for suction conforming to IS 907:1984 with SS filter screen and flange drilling standard end connection conforming to IS 1538-1993 and necessary accesories for suction side of fire pumps complete all as specified and directed.

Supply and fix galvanized mild steel fire bucket (filled with dry sand) conforming to IS 2546: 1974 round bottom type enamel painted, white inside and red outside and letters "FIRE" in black outside and handle with mounting bracket complete all as specified and directed.

Supply and fix signage made out of 3 mm thick opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board with mirror fasteners complete of size 300 mm X 150 mm reading "EXIT" in 12.5 mm block letters in green and white background, properly spaced to provide good legibility located directly in corridor near to each staircase and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level complete all as specified and directed.

Supply and fix signage made out of 3 mm thick opaque PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board with mirror fasteners complete of size 450 mm X 150 mm reading "FIRE EXTINGUISHER" in 12.5 mm block letters in white and red background, , properly spaced to provide good legibility located directly in corridor near to each Manual call point/ Fire Extinguisher and squarely attached to the wall or partition in a way that the top of the sign is not above 2 m from the finished floor level complete all as specified and directed.

Supply and fix CL#150 rated three-piece design 25 mm NB cast steel (CS) straight pattern ball valve, conforming to IS 9890: 1981 and tested as per BS 6755-1, having cast iron body, stainless steel AISI 304 ball, renewable PTFE seat and gland packing, CS fastners and lever having screwed/ socket weld end connection with accessories complete all as specified and directed.

Supply, installation, testing and comminsioning of fully automatic Star/ Delta starter, suitable for the booster pump, complete with contactors, push button, LED type indicators, auto/manual selector switch, overload protection, current sensing type single phase preventer complete with all accesories and wiring etc. complete all as specified and directed.

Material and labour for 1100 Volts grade 3 core, 6 mm² copper conductor, XLPE armoured cable conforming to IS 7098-1: 1988, having stranded aluminium compact shaped conductors as per CI. 2 of IS 8130: 1984, PVC inner sheath, single armouring of galvanised steel strip/ wire and PVC Type ST-2 outer sheath conforming to IS 5831-1984, icluding necessary clamping/ dressing with cable ties and termination complete all as specified and directed.

Supply and fix PN 1.6 rated air vent valve having brass body, cover, adopter, disc assembly and cap, stainless steel strainer, plastic float and 25 mm screwed threaded ends suitable for maximum operating temperature 100 ˚C installed on all high points in the water piping system to automatically remove the trapped air with necessary accesories complete all as specified and directed.

Supply and fix orifice plate made out of 6 mm thick SS 304 with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete all as specified and directed.

NOTE: Amount of credit of Rs 544196.00 for retrieved materials is mentioned in schedule of credit on Srl Page No 52 & 53 of tender documents in pdf form which will be deducted offline while acceptance of tender.