Military Engineer Services Tender

SCH 'A' PART-IV : "INTERNAL ELECTRIC SUPPLY" Total of Schedule 'A' Part-IV brought forwarded from Serial Page No. 27

SCH 'A' PART-V "LIGHTENING PROTECTION" Total of Schedule 'A' Part-V brought forwarded from Serial Page No. 28

SCH 'A' PART-VI"AIR CONDITIONING AND REFRIGERATION" Total of Schedule 'A' Part-VI brought forwarded from Serial Page No. 29

SCH 'A' PART-VII "FIRE FIGHTING" Total of Schedule 'A' Part-VII brought forwarded from Serial Page No. 32

SCH 'A' PART-VIII "ROAD/PATH" Total of Schedule 'A' Part-VIII brought forwarded from Serial Page No.33

SCH 'A' PART-IX "SEWAGE DISPOSAL" Total of Schedule 'A' Part-IX brought forwarded from Serial Page No. 34

SCH 'A' PART-X "AREA DRAINAGE" Total of Schedule 'A' Part-X brought forwarded from Serial Page No. 35

SCH 'A' PART-XI "EXTERNAL WATER SUPPLY" Total of Schedule 'A' Part-XI brought forwarded from Serial Page No 36

SCH 'A' PART-XII "EXTERNAL ELECTRIC SUPPLY" Total of Schedule 'A' Part-XII brought forwarded from Serial Page No.38

SCH 'A' PART-XIII"MISC WORKS"

" INTERNAL ELECTRIFICATION"

Supply and fixing LED light fitting surface mounted 1'x1 ' of capacity 15Watt of 240V Environment friendly High quality LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination complete with all connected accessories.

S&F DLP U PVC trunking system Plastic adoptable type 150x50mm with two compartment duly covered installed with suitable support joints including all accessories complete all as specified and as directed.

Supply and fixing TP&N distribution board with double door vertical type TPN DB made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating,suitable for MCCB for capacity 100Amp, 16 KA, Incomer 4 ways 415 Volts made up of CRCA sheet with busbar rating 200 Amps Adjustable thermal (70% to 100%) & Fixed magnetic setting type including grouting in the wall, cutting & chasing etccomplete all as specified . Make: Havells/ L&T/ABB

M & L of earthing complete with galvanized steel earth plate electrode of size 600 x 600 x 6 mm thick buried directly in ground to a depth not less than 2.25 mtr below the normal ground level with top edge of earth plate not less than 1.50 mtr below the normal ground level and connected to galvanised earth lead wire 4.0mm dia by means of nut, bolt & washer and protected by 40mm dia GI pipe light grade and watering pipe of 20mm dia GI pipes light grade and connected to earth test point including necessary excavation, earth work, PCC chamber (1:3:6) type C-1 and 40 mm thick RCC pit cover in RCC (1:2:4) type B-1 using 6 mm dia MS round bars @ 150 mm C/C both ways all as shown in electrical plate No. 3 of SSR Part-I all as specified and directed.

" LIGHTENING PROTECTION"

Supply & fix poroceline insulator for laying of ligtning striip on the roof/ wall for maintain distance from suface and strip of suitable size and distance between two insulator minimum 1mtr complete all as specified and directed.

Supply and fixing Earthing conductors connecting juction box with copper plate as suitable size and connected to separate copper cable to equipement etc complete all as specified and as directed.

Supply and fixing Earthing conductors connecting juction box with copper plate as suitable size and connected to separate copper cable to equipement etc complete all as specified and as directed.

" FIRE FIGHTING"

Supply, installation, testing and comissioning of ISI Marked 2 core x 1.5 Sqmm, multistandard Copper Conductor, FRLS Armoured cable, RED in Colour, laid on surface with GI saddle-spacers every 0.3 meters. Complete with GI Junction Box, lugs, cable compression glands, cable tags and Ferruling complete all as specified and directed.

S & F GI slotted type cable trays of the following sizes using MS angle, channels, flats etc. All MS supports used shall be given one coat of red oxide primer & 2 coats of synthetic enamel paint of approved colour of size 100 x 50 mm x 2mm complete all as specified and directed.

S & F Fire extinguisher water CO2/stored pressure type 9 ltr capacity (IS:940/6234) complete all as specified and directed.

S & F Fire extinguisher Dry chemical powder type (ABC), 5 Kg (IS: 2171/13849) capacity complete all as specified and directed.

S & F Fire Exit sign board made up of accrelic sheet of suitable size and standard font for indicating fire exit.

"SEWAGE DISPOSAL"

M&L for walling of Porbandar stone masonry uncoursed well bonded and solidly hearted built in CM 1:6 brought up to courses complete all as specified .

"AREA DRAINAGE"

M&L for walling of Porbandar stone masonry well bonded and solidly hearted built in CM 1:6 complete all as specified .

"ROAD/PATH"

M&L for walling of Porbandar stone masonry uncoursed well bonded and solidly hearted built in CM 1:6 brought up to courses complete all as specified .

"EXTERNAL WATER SUPPLY"

Supply and Fix DOL Starter upto 5 Hp coil voltage200-400Volt, AC Make: L&T/Siemens or equivalent complete all as specified and directed.

Supply and fixing of submersible pump set suitable for 415 V ,3 phase system having capacity discharge rate minimum 400 LPM , Head is 50 mtr, 5 HP, copper wounded, cast iron material having 50mm Delivery size, 3000RPM Make: CG/Kirloskar or equivalent complete all as specified and directed.

"EXTERNAL ELECTRIC SUPPLY"

Supply and fix LT cable route indicator PCC with embossing LT cable with height not less than 600 mm , situated on PCC base all as per standard specification

Supply, Installation, Testing and commissioning LT Panel outdoor type cubical panel board IP 65 free standing floor mounted made out of 3.15 mm thick CRCA sheet, duly powder coated, compartmental design with locking arrangements, weather and vermin proof with proper ventilation slots complete of suitable size and comprising of following items:- (a) MCCB 100 Amps, 25 KA,4 Pole, 415 volt, 50 Hz thermal, magnetic adjustable type -1No (Incommer) (b) MCCB 63 Amps, 16 KA, 4 Pole,415 volts,50 Hz - 02 No (c) MCB 40 Amp TP -03 nos ( Building, Pumpset, Fire Pump, Street Light) (d) MCB 4 pole 32 Amps capacity - 05 Nos ( AC & Water cooler) (e ) Onload change over switch 415V in sheet metal enclosure 4 pole 63A - 02 No. (f) Digital Voltmeter with selector switch - 1 No (g) Digital Ammeter with CTs and selector switch - 01 No (h) LED phase Indication lamp showing R-Y-B phases- 01 set (i) Copper busbar TPN 200 Amps covered with heat shrinkable sleeves duly colour coded -01 set

"DG Set"

Supply, installation, testing and commisioning of silent Diesel Engine driven generating set of capacity 40 KVA 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002 and Alternator as per IS: 13364 complete with relay panel and switch gears for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms and complete foundation etc. Make: Kirloskar / Geaves power (A) Diesel Engine:- The engines are rated at 1500 RPM BHP not less than 200 BHP and conform to ISO 8528 specifications, radiator cooled, four stroke and multi cylinder, confirming to BS 5514 / ISO 3046 with the following accessories:- (a) Elecrical starter motor 12 V DC - 01 Nos (b) Battery charger 12V DC - 01 No (c) MICO fuel system with mechnical governor (d) Dual spin on fuel filter (e) Spin on full flow lub oil filter (f) Residential silencer (g) Dry type air cleaner (h) Recovery bottle (j) Shut off coil with safeties for LLOP / HWT (k) Fly wheel and flywheel housing (l) first fill of lube oil and coolant (B) Alternator:- Brushless type, scren protected, revolving filed, self excited, self regulated through an AVR. The alternator is suitable for operation at 1500 RPM, 415 Volts, 0.8 pf (lagging) suitable for 50 Hz, 3 phase, 4 wire system, confirming to BS 5000/IS 4722. The alternator has the following features:- (a) + 1.0% Voltage regulation (max) in static condition. (b) IP:23 Enclosure (c) Permissible overload of 10% for one hour in 12 hours operation (d) Mounting Arrangement:- The Engine and alternator are mounted on a common MS fabricated base frame with AVM pads Note: Foundation for DG set deemed to be included in quoted rate.

Supply, installation, testing and commissioning of AMF panels indoor type for 40 KVA DG set, with angel iron pedastal frame, cubical type, free standing, working on 415 volts 3 phase 50Hz, AC supply complete with colour coated coper bus bars 200 Amps fully compartmentalised, dust and vermin proof, 2 mm thick CRCA sheet steel enclosure complete including painting as per the 7 tank process, IP 52 protections, as per specification and having the following details all as shown in single line diagram:- Incomers:- AMF control circuit with 4 pole MCCB 100 amps 35 KA, 415 volts, 50 Hz - 02 Nos, 4 pole changeover contactor, relays, AC-3 heavy duty with HRC back up fuse complete with all DC control relays / line voltage monitor (LVM) as per OEM specifications incorporating Engine start, stop, three three attempt starting facility and failure to start complete. (i) Indication lamps R Y B with 3 Nos of 2A HRC fuses - 10 sets. (ii) Bottom gland plate for incoming and outgiong cable. (iii) Circuit diagram plate. (iv) Digital type voltmeter 0 - 500 V with selector switch - 2 Nos. (v) Digital Ammeter 0 - 500 Amps with cast resin type CTs and selector switch - 1 No. (vi) Digital type frequency meter for 50 Hz - 1 No. (vii) Digital type power factor meter - 1 No. (viii) CT operated 3 phase 4 wire 415 volts 50 Hz KWH meter of accuracy class 1.0 with backlit LCD display for measuring and displaying active energy and flush mounted - 1 No.