Military Engineer Services Tender

Supply and fix Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Supply and fix Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, 2P+earth, complete all as specified and directed.

Supply and fix in repairs flame proof and weather proof industrial type DBs TPN 415 Volts with and including various combination of incoming and outgoing flame proof MCBs suitable for and including (a) 01 No MCB TPN 63 Amps, 10 KA C type (incoming) (b) 06 Nos MCB SP 10 Amps 10 KA C type (c) 2 Nos MCB SP 20 Amps 10 KA C type, including necessary connection, complete all as specified and directed.

S&F in repairs OF flame proof weather proof flood light fitting suitable for & including 90 watt LED chips, flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection in cast aluminum alloy LM 79 construction, including driver, reflector, connector block, etc, and all accessories pre-wired and including connecting up with copper conductor cable of suitable type complete all as specified and directed.

S&F in repairs OF flame proof weather proof flood light fitting suitable for & including 70 watt LED chips, flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection in cast aluminum alloy LM 79 construction, including driver, reflector, connector block, etc., and all accessories pre-wired and including connecting up with copper conductor cable of suitable type complete all as specified and directed.

S&F in repairs OF flameproof, weather proof LED tube light fitting, type FLP-WP with LED 1 x 16 flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection including integral reflector made of aluminum alloy LM79 , with electronic driver, connector block, etc., and all accessories pre-wired and including connecting up with copper conductor cable of suitable type complete all as specified and directed.

Material & Labour for sub main wiring in repair with 2 run single core multistranded copper conductor cable of size 2.5 Sqmm, PVC insulated, unsheathed, FR-LSH (Flame Retardant Low Smoke & Halogen), drawn through and including mild steel ERW conduit not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 2.5 Sqmm, PVC insulated, unsheathed, FR-LSH as earth wire, fixed on wall / ceiling, complete all as specified and directed. Note: 2 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment.

Material & Labour in for sub main wiring in repair with 4 run single core multistranded copper conductor cable of size 6 Sqmm, PVC insulated, unsheathed, FR-LSH (Flame Retardant Low Smoke & Halogen), drawn through and including mild steel ERW conduit class 'B' (ISI Makes) not less than 32 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6 Sqmm, PVC insulated, unsheathed, FR-LSH as earth wire, fixed on wall / ceiling, complete all as specified and directed. Note: 4 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment

Supply and erect Prestressed concrete pole, 9.0 metres long, 102mm x 172mm at top and 102mm x 279mm at bottom, class 10, including takingdown old pole any type and removal. Note:- (a) Rate quated is inclusive of following (i) Excavation&Earthwork ,Returning filling and Removal in any strata (ii) PCC (1:3:6) type C2 as per specification (iii) Coping (1:2:4) type B1 as per specification.

Supply , installation, testing & commissioning in replacement factory made, CPRI approved, outdoor type, LT Panel board of size 900mm 900mm x 450mm , confirming to IS 5039- with IP-54 protection, made out of 3.15 mm thick CRCA sheet , 415 Volt, 3 phase , 50 HZ supply mounted on and including MS angle section 50 x 50 x 6 mm frame with front and back openable, double door with provision of locking arrangement dust & vermin proof , gasket, TPN busbar shall be insulated with colour coated heat shrinkable sleeves and shall be mounted on proper insulator, gland, welding hinges of dust proof, overall powder coated complete all as specified and directed & Consisting of the following equipments:- (i) MCCB, 4 pole, 16 KA , 100 Amps -01 No (ii) MCCB, TPN, 16 KA, 63 Amps - 02 Nos (iii) Mounting arrangement for 2 MCB for future Expansions. (iv) Power Contactor MNX75/80-01 No (v) Analog type time switch-01 (vi) Solid aluminium bus bar 200 Amp for 3 phase , 200 Amp for neutral

M&L in repair for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6.0 mm thick burried directly in ground not less than 2.25 mtrs deep below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level, surrounded from all sides with mixture of charcoal and common salt and electrode to galvanised iron strip 25x4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel protected by galvanised iron light grade 40 mm dia pipe and GI Pipe 20 mm light grade for water filling including 15x20 mm reducer socket funnel wire mesh, RCC cover PCC chamber pit with PCC (1:3:6) type C-2 excavation and earth work, disposal of surplus spoil, to a distance not exceeding 50 mtrs all as specified and shown on electrical plate No. 3 of 2009 (Part-I) complete all as directed. Note:- (i) Quoted rates shall be deemed to include for earth strip with protection pipe up to 7.5 M length. (ii)Black Soil to be arrange by contractor for mixing with charcoal, crystal salt , and also for fiiling balance portion of unit in layers is deemed to be included to be rate quoted. (iii) transportation charges for arrangement of black soil is deemed to be included in the rate quoted.

Supply & laying XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 16 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed

Supply & laying XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip or wire, heavy duty, LT underground cable, with aluminium conductor 1100 volt grade of size 25 Sqmm 4 core laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing etc complete all as specified & directed (Note for item No 17 & 18 :-(i) Sand cushioning, cable protection, GI protection pipe, clamps, jointing kits and excavation & earth work shall be measured & paid for separately. (ii) Road cutting/floor cutting /cutting holes etc in walls required for laying/fixing of cable etc shall be made good as per existing. Nothing extra shall be admissible on this account. Quoted rates shall be inclusive of the above provisions.)

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying/taking out of cables and foundation of poles etc, n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil alongwith disconnecting U/S XLPE cable any size and taking out including bricks/cable cover for protection, sand cushioning and stacking, removal to store for re-use or for credit, etc complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying/taking out of cables and foundation of poles et, n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in Hard/dense soil complete all as specified and as directed.

Returning filling in including spreading leveling, watering and well ramming in layers not exc 25 cm thick using excavated soil complete all as specified and as directed.

Removing excavated soil to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Material and labour, sand cushioning with a layer of dry river sand, 80mm thick before laying of cable and 150mm thick (punned down to 100mm thick) after laying of cables, in trenches/ducts, complete all as specified and as directed. Note : Punned down thickness (overall 18cm), shall be considered for measurement and payment.

Supply & laying ISI marked & conforming to IS - 5820 - 1970 unreinforced precast concrete cable cover Class LV , Type I , flat size 250 mm X 150 mm X 40 mm in trenches at 10 mm gap as protection to LT UG cable all as specified and directed.

Supply and laying / fixing , GI pipe light grade 40mm dia bore for cable protection fixed to pole/wall or laid under floor/roadv /pavement, including flat iron clamp, nut, bolt, wahser etc of required size and taking out old & removal, complete all as specified and as directed.

Supply and laying / fixing , GI pipe light grade 50mm dia bore for cable protection fixed to pole/wall or laid under floor/roadv /pavement, including flat iron clamp, nut, bolt, wahser etc of required size and taking out old & removal, complete all as specified and as directed.

S&F of LED flood Light fitting 200 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws fixed on existing bracket & connecting, Fixed in repair, complete all as specified and directed.

S&F in replacement of LED Street Light fitting 120 Watt, system efficiency not less than 100 lumen / watt, IP65/66 protection, consisting of high / low voltage cut off, maintenance free isolated Electronic driver circuits, Low THD, PMMA grade high quality Transmittance lens, Epoxy powder coated Die Cast Aluminium housing with weather proof gasket for lamp & driver compartment, Heat resistance toughened glass fitted in cast aluminium housing with SS screws, fixed on existing bracket & connecting,Fixed in repair, complete all as specified and directed.

Supply & fix of PVC insulated, PVC sheathed, cable, with multistrandard aluminium conductor of size 2.5 Sqmm, 2 core, fixed from Junction box to street light fittings including taking down old cable.

S&F in replacement of 20 mm bore UPVC pipe of pressure rating 4 kgf/cm ² inclusive of fitting etc fixed on pole / wall with mild steel clamps made out of MS Flat 25 x 6mm including, nuts, bolts at the interval of 1metre complete including two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing in repair copper earth strip of size 20 x 3 mm with epoxy insulators and fixing screws etc for earth continuity conductors to test point terminals to test point terminal including taking down old strip all as directed by Engr-in-charge. Note : Epoxy insulator will be measured and paid separately under respective items of this Schedule.

Supply and fix in repair 25 mm size epoxy type insulator suitable for fixing earthing strip including screw etc all as directed by Engr-in-charge

S&F in repair of Sheet moulding compound (SMC) junction box of size 340 mm x 160 mm x 90mm, or higher comprising three phase aluminium bus bar and fixed on pole with mild steel clamps, nuts and bolts complete.

Supply and fixing in repairs TAC Galvanised iron earth wire of size 4sqmm with epoxy insulators and fixing screws etc for earth continuity conductors to test point terminals to test point terminal including taking down old strip all as directed by Engr-in-charge. Note : Epoxy insulator will be measured and paid separately under respective items of this Schedule.

S&F Air termination, Star pointed copper rod 14 mm dia and 500 mm long with copper Air Rod fixed in position on pole complete with clamp and nut bolts, fixed in repairs all as specified and directed