Military Engineer Services Tender

M & L for sand filling in trenches for cushioning of LT cables punning after filling complete as specified and as directed. Note: Punned thickness shall only be measured and paid

Supply and lay un-reinforced precast concrete cable cover , class , LV , Type I flat size 250 x 150 x 40 mm laid dry in treches over under ground cables complete all as specified and directed.

S & F GI pipe, light grade, of size 50 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, complete all as speicifed and directed for cable protection complete all as specified and directed.

S & F GI pipe, light grade, of size 80 mm dia including necessary fittings laid in trenches/fixed on wall/pole for LT cable protection and taking down the old GI pipe, complete all as speicifed and directed for cable protection complete all as specified and directed.

Dismantaling of any type and size ACSR conductor complete all as specified and directed.

Dismantaling of stay assembly including demolation of concrete etc complete all as specified and directed.

Dismantaling of insulator any size and any type complete all as specified and directed.

Dismantaling of cross arm of MS chanel or angle sections any type any size etc complete all as specified and directed.

Disconnecting, taking out, removing old existing unserviceable LT cable overhead service cable of any size etc complete all as specified and directed.

Supplying ,Laying , jointing and testing XLPE insulated, armoured, heavy duty, LT aluminum conductor cable 1100 volts grade of size 4 core 16 Sqmm laid in trenches/ducts, floors, fixed to walls etc complete all as specified and directed.

- ditto- here in before Item 13 but of size 3.5 core 50 Sqmm complete all as specified and directed.

- ditto- here in before Item 13 but of size 3.5 core 70 Sqmm complete all as specified and directed.

- ditto- here in before Item 13 but of size 3.5 core 120 Sqmm complete all as specified and directed.

- ditto- here in before Item 13 but of size 3.5 core 150 Sqmm complete all as specified and directed.

- ditto- here in before Item 13 but of size 3.5 core 300 Sqmm complete all as specified and directed.

Supply, installation, testing and commissioning CPRI approved weather and vermin proof LT Panel box factory fabricated out door cubicle type (KIOSK type ) , front and back openable , air vent , totally enclosed outer cage made out of 3.15 mm thick sheet metal and inner compartments of 2.0 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement with pad lock consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and civil work and copper bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including sleeves as per colour coading and connecting the following :- Main LT panel

Incoming (a) Aluminium Bus bar, 500 Amps TPN -01 set (b) MCCB 4 Pole thermal magnetic release 415 volts, ICS=100%ICU,Adjustable overload, short circuit, 320A 36 KA-01 (c) Digital Ammemeter 0 to 400 Amps with CT coils and selector switch - 01 No (d) Indicating lamps ( LED type) ( R-Y-B) -01 (Set of three) (e) Digital voltmeter 0 to 500V with selector switch - 01No (f) Digital Multifunctional meter - 01 No Outgoing (a) MCCB 4 Pole thermal magnetic release 415 volts ICS = 100% ICU , Adjustable overload , short circuit , 160 A 36 KA-02 (b) MCCB 4 Pole thermal magnetic release 415 volts ICS = 100% ICU ,Adjustable overload , short circuit , 100 A 36 KA-03

Supply, installation, testing and commissioning CPRI approved weather and vermin proof LT Panel box factory fabricated out door cubicle type (KIOSK type ) , front and back openable , air vent , totally enclosed outer cage made out of 3.15 mm thick sheet metal and inner compartments of 2.0 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement with pad lock consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and civil work and copper bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including sleeves as per colour coading and connecting the following :- (LT Panel-1)

Incoming (a) Aluminium Bus bar, 150 Amps TPN -01 set (b) MCCB 4 Pole thermal magnetic release 415 volts, ICS=100%ICU,Adjustable overload, short circuit, 100 A 35 KA-01 (c) Digital Ammemeter 0 to 200 Amps with CT coils and selector switch - 01 No (d) Indicating lamps ( LED type) ( R-Y-B) -01 (Set of three) (e) Digital voltmeter 0 to 500V with selector switch - 01No (f) Digital Multifunctional meter - 01 No Outgoing (a) MCCB 4 Pole thermal adjustable magnetic release 415 volts ICS = 100% ICU ,Adjustable overload, short circuit, 25 A 16 KA-08(6 working +01 stand by)

Supply, installation, testing and commissioning CPRI approved weather and vermin proof LT Panel box factory fabricated out door cubicle type (KIOSK type ) , front and back openable , air vent , totally enclosed outer cage made out of 3.15 mm thick sheet metal and inner compartments of 2.0 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement with pad lock consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and civil work and copper bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including sleeves as per colour coading and connecting the following :-(LT panel-2)

Incoming (a) Aluminium Bus bar, 250 Amps TPN -01 set (b) MCCB 4 Pole thermal magnetic release 415 volts, ICS=100%ICU,Adjustable overload, short circuit, 160 A 35 KA-01 (c) Digital Ammemeter 0 to 200 Amps with CT coils and selector switch - 01 No (d) Indicating lamps ( LED type) ( R-Y-B) -01 (Set of three) (e) Digital voltmeter 0 to 500V with selector switch - 01No (f) Digital Multifunctional meter - 01 No Outgoing (a) MCCB 4 Pole thermal adjustable magnetic release 415 volts, ICS = 100% ICU ,Adjustable overload, short circuit, 25 A 16 KA-12(10 working +01 stand by)

Supply, installation, testing and commissioning CPRI approved weather and vermin proof LT Panel box factory fabricated out door cubicle type (KIOSK type ) , front and back openable , air vent , totally enclosed outer cage made out of 3.15 mm thick sheet metal and inner compartments of 2.0 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement with pad lock consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and civil work and copper bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including sleeves as per colour coading and connecting the following :-(LT panel-3)

Incoming (a) Aluminum Bus bar,150 Amps TPN -01 set (b) MCCB 4 Pole thermal magnetic release 415 volts ICS = 100% ICU ,Adjustable overload, short circuit, 100 A 35 KA-01 (c) Digital Ammemeter 0 to 200 Amps with CT coils and selector switch - 01 No (d) Indicating lamps ( LED type) ( R-Y-B) -01 (Set of three) (e) Digital voltmeter 0 to 500V with selector switch - 01No (f) Digital Multifunctional meter - 01 No Outgoing (a) MCCB 4 Pole thermal adjustable magnetic release 415 volts, ICS=100%ICU,Adjustable overload, short circuit, 25 A 16 KA-05(4 working +01 stand by)

Supply, installation, testing and commissioning CPRI approved weather and vermin proof LT Panel box factory fabricated out door cubicle type (KIOSK type ) , front and back openable , air vent , totally enclosed outer cage made out of 3.15 mm thick sheet metal and inner compartments of 2.0 mm thick sheet metal enclosure with angle iron frame of M.S. angle 50x50x6 mm suitable for operation on 3 phase 4 wire, 440 volts 50 HZ system, with hinged panel doors (covers) on two sides with handles, bottom gland plate and locking arrangement with pad lock consisting of sufficient Nos of circular cable entry holes at bottom only with suitable PVC/rubber /wooden bushes to prevent ingress of water/vermin etc, inside the enclosure, the required nos of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with stranded copper conductor PVC insulated cables of adequate size, duly powder coated internally/ externally of approved colour with PCC foundation and civil work and copper bus bar for 3 phase & neutral mounted on epoxy insulator-01 Set including sleeves as per colour coading and connecting the following :-(LT panel-4)

Incoming (a) Aluminium Bus bar, 250 Amps TPN -01 set (b) MCCB 4 Pole thermal magnetic release 415 volts ICS=100%ICU,Adjustable overload, short circuit, 160 A 35 KA-01 (c) Digital Ammemeter 0 to 200 Amps with CT coils and selector switch - 01 No (d) Indicating lamps ( LED type) ( R-Y-B) -01 (Set of three) (e) Digital voltmeter 0 to 500V with selector switch - 01No (f) Digital Multifunctional meter - 01 No Outgoing (a) MCCB 4 Pole thermal adjustable magnetic release 415 volts, ICS=100%ICU,Adjustable overload, short circuit, 25 A 16 KA-12(11 working +02 stand by)

Supply and fixing in replacement of Street light fitting in new generation energy saving environemental friendly long life LED street light with single die ceramic base high power LED light source,PDC housing with top openable access to driver for ease maintenance , lumen output 9000 or higher , system effiency 100-120 lm/watt , color temp 5700 K , made up of LM6 high pressure die cast aluminium housing with toughned glass ,IP66 protection , PF 0.95 ,external surge protection 10KV , seperate comparment for driver ,operating voltage 140-270 Volt, 1 LED shoud be 1 to 3 watt, impact, IK7 or higher and capacity 90 Watt,including GI pipe brackets of 1.5 mtr length 40mm dia or as per manufacture recommendations & all connected accesories required to fix the bracket on pole or wall , angle of bracket as per manufacture or site requirement complete all as specified and directed.

Supply and fixing in replacement of Street light fitting in new generation energy saving environemental friendly long life LED street light with single die ceramic base high power LED light source,PDC housing with top openable access to driver for ease maintenance , lumen output 9000 or higher , system effiency 100-120 lm/watt , color temp 5700 K , made up of LM6 high pressure die cast aluminium housing with toughned glass ,IP66 protection , PF 0.95 ,external surge protection 10KV , seperate comparment for driver ,operating voltage 140-270 Volt, 1 LED shoud be 1 to 3 watt, impact, IK7 or higher and capacity 70 Watt,including GI pipe brackets of 1.5 mtr length 40mm dia or as per manufacture recommendations & all connected accesories required to fix the bracket on pole or wall , angle of bracket as per manufacture or site requirement complete all as specified and directed.

Supply and fixing in replacement of Street light fitting in new generation energy saving environemental friendly long life LED street light with single die ceramic base high power LED light source,PDC housing with top openable access to driver for ease maintenance , lumen output 9000 or higher , system effiency 100-120 lm/watt , color temp 5700 K , made up of LM6 high pressure die cast aluminium housing with toughned glass ,IP66 protection , PF 0.95 ,external surge protection 10KV , seperate comparment for driver ,operating voltage 140-270 Volt, 1 LED shoud be 1 to 3 watt, impact, IK7 or higher and capacity 60 Watt,including GI pipe brackets of 1.5 mtr length 40mm dia or as per manufacture recommendations & all connected accesories required to fix the bracket on pole or wall , angle of bracket as per manufacture or site requirement complete all as specified and directed.

Supply and fixing in replacement of Flood light fitting in new generation energy saving environemental friendly long life with die-cast aluminium alloy for housing (heat sink) for effcetive thermal managemnet, high power LED light source,zero maintenance, Lumen efficiency of LED 140lm/W, viewing angle 120 degree color temp 5700 K , made up of high pressure die cast aluminium housing with toughned glass ,IP66 protection , PF 0.95 ,external surge protection 10KV , seperate comparment for driver ,operating voltage 140-270 Volt, over voltage protection, output open circuit protection,m16 gland is used for cable entry , Toughened glass, IK7 or higher and capacity 200 Watt all as per manufacture recommendations & all connected accesories complete all as specified and directed.

M&L for three core PVC insulated sheathed(heavy duty) unarmoured copper conductor multi stranded cable (for phase, neutral and earth ) of size 1.50 Sqmm for connection drawing through pole or GI brackets from junction box to light conncector of street light fittings including heavy duty PVC conduit of size 20mm dia, lugs /thimbles according to size of cable complete all as specified and directed.

M & L rewinding of induction motor capacity 1.5/2HP Motor of high mast light after taking out all burnt ,U/s copper winding wire, cleaning and finishing of the casing and slots properly for rewinding the motors with existing SWG super enameled copper wire including varnishing ,baking ,testing including refixing and taking down complete all as specified and directed.

Comprehensive maintanence of High mast light including repair of gear box , oiling of rope , repair of control panel for automatic /manual up/down of light assembly , replacemnt of electrical/mechanical parts for completion operation of light mast light complete all as specifed and directed. Note: (i) major working like rewinding of motor shall be measured and paid separately under relavent item of schedule.

Supply, erecting and fixing in true vertical position, Prestressed cement concrete pole 9 mtr long confirming to IS-1678 (latest) with minimum cross sectional area 102 mm x 152 mm at top and 102 mm x 289 mm at bottom , class - 10 ,removing of old pole to side and refixing of MS channel , restringing of conductor, providing 3 Nos of 30cm wide circular bands with black & yellow paint starting from plinth level at a gap of 30cm in between 2 bands and numbering of poles, and numbering of the poles shall be done with synthetic enameled painted letter of shape & size complete all as specified and directed. (Note -SSR part I clause No.19.5 & 19.52 and other relevant clauses of SSR refers for execution of work and poles shall be procured directly from the manufacturer mentioned in tender documents.)

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, laying of cable/pipe etc or for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in soft/loose soil complete all as specified & directed.

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m in depth and not exceeding 3.0m depth for foundation, laying of cable/pipe etc or for shaft, walls, cesspts, manholes, pier holes etc not exceeding 10 sqm on plan and getting out in hard/dense soil complete all as specified & directed.

Removing excavated soil to a distance not exc. 50 metre and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L for PCC (1:3:6) type C-2 using 40 mm graded crushed stone aggregate in foundation, filling and mass concrete for poles/struts etc including necessary formwork as required complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20 mm graded aggregates as in copings, kneelers, apex stones, bed plates, kerbs etc., water troughs and the like including weathering, slightly rounded for chamfered angles and throating including necessary form work complete all as specified and as directed.

NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor.