Military Engineer Services Tender

All as per serial item number 2.00 here-in-before but of size 35 Sqmm 3.5 core

All as per serial item number 2.00 here-in-before but of size 50 Sqmm 3.5 core

All as per serial item number 2.00 here-in-before but of size 70 Sqmm 3.5 core

All as per serial item number 2.00 here-in-before but of size 95 Sqmm 3.5 core

Re-laying of old serviceable cable of any size obtained from item above. Note:- Excavation earthwork, cable covers, sand cushioning and GI protection pipe shall be measured and paid separately under relevant item.

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in soft/ loose soil, for laying of under ground electric cable, pipes etc complete all as specified and directed. Note:- (i) Authorised width & depth shall only be excavated, measured and paid as specified in clause 3.2.3 of SSR part II and 19.74.1 of SSR part I for cable/pipe laying portion. (ii) Serviceable PCC /RCC cable cover obtained during excavation shall be stacked separately carefully without any extra cost to the Deptt.

Material and labour for river bed sand filling in trenches/ ducts 15 cm above cable and 8 cm under the cable for cushioning/protection to cable including spreading, leveling and get thick 18cm after hand punning complete all as specified and directed

Laying only serviceable un-reinforced precast concrete cable cover class LV, Type 1, flat, of 250 mm x 150 mm x 40 mm obtained from trenches, abetting each other with gap between adjacent slab not exceeding 10 mm over under cable for protection complete all as specified and as directed.

Supply and laying un-reinforced precast concrete cable cover, class LV, Type 1, flat, size 250 mm x 150 mm x 40 mm abetting each other with gap between adjacent slab not exceeding 10mm over under cable for protection complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layer not exceeding 25cm thick each complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.50 metre above the starting point complete all as specified and directed.

Material and labour for cutting under the road /pavement /hard standing or in any other situation with the manual labour for crossing of U/G cable through it and making both the end good complete all as specified and directed .

Supply and laying GI water tubing of 80 mm bore, light grade, IS-1239 marked with all fittings IS marked and laid in trenches/under roads/in drains with suitable size flat iron/GI clamps, bolts, nuts and washers etc for cable protection complete all as specified and directed.

Supply and laying GI water tubing of 50 mm bore, light grade, IS-1239 marked with all fittings IS marked and laid in trenches under roads/in drains, fixed to poles/walls with suitable size flat iron/GI clamps, bolts, nuts and washers etc for cable protection, complete all as specified and directed .

Supply and laying GI water tubing of 40 mm bore, light grade, IS-1239 marked with all fittings IS marked and laid in trenches/under roads/in drains with suitable size flat iron/GI clamps, bolts, nuts and washers etc for cable protection, complete all as specified and directed .

Supply, fixing and testing LT cable jointing kit straight through heat shrinkable type suitable for cable PVC /XLPE insulated armoured heavy duty aluminum conductor 1100V grade LT cable of size 3.5/4 core 16 to 50 sqmm complete all as specified and directed .

Supply, fixing and testing LT cable jointing kit straight through heat shrinkable type suitable for cable PVC /XLPE insulated armoured heavy duty aluminum conductor 1100V grade LT cable of size 3.5/4 core 70 to 150 sqmm complete all as specified and directed .

Supply, fixing and testing LT cable jointing kit straight through heat shrinkable type suitable for cable PVC /XLPE insulated armoured heavy duty aluminum conductor 1100V grade LT cable of size 3.5/4 core 185 to 300 sqmm complete all as specified and directed .

Material and labour for cement concrete in pole foundations, coping, filling and mass concrete, type D2 1:4:8, (using 40mm graded stone aggregate) including dismantling old PCC etc complete all as specified and directed .

Material and labour for Cement concrete in pole foundations, coping, filling and mass concrete, type C2 1:3:6, (using 40mm graded stone aggregate) including dismantling old PCC etc complete all as specified and directed .

Supply and fix in replacement of MCCB 3 Pole, 415 V, fixed type, 63 to 100 Amps with breaking capacity 16 KA complete all as specified and directed .

Supply and fix in replacement of MCCB 3 Pole, 415 V, fixed type, 160 Amps with breaking capacity 25 KA complete all as specified and directed .

Supply and fix in replacement of MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed .

Supply and fix in replacement of MCCB 4 Pole, 415 V, Adjustable type, 200 Amps with breaking capacity 36 KA complete all as specified and directed .

Supply and fix in replacement of MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA complete all as specified and directed .

Supply and fix in replacement of MCCB 4 Pole, 415 V, Adjustable type, 350 Amps with breaking capacity 36 KA, complete all as specified and directed .

Supply and fix in replacement for kiosk box for luminaries, weather proof made out of PVC/HDPE /FRP housing fire retardant, non fusing, shock & rust proof, single piece molded and cover with hinged door, pole mounting type comprising of aluminum TPN bus bar of 60 Amps of minimum size 300x250x150mm, fixed on pole with MS, clamps 30x5mm with necessary nuts, washer complete all as directed. Note. Rate of TPN bus bar and MS clamp inclusive in item rate complete all as specified and directed .

Supply and fix in repair service wire 1100 volts grade PVC insulated PVC unsheathed cable multi stranded copper conductor of size 1.0 sqmm 3 core complete all as specified and directed .

Supply and fix sintex box of size 450mm x 375mm x 200mm made out of poly carbonate IP-65 protection with poly ethelene gasket and glow wire tested at 960 degree celcius as per IEC 60695-2-11 and thermoplastic gland of suitable size fixed on poles with galvanised clamps (02 Nos on each pole) of F1, 40x5mm made to shape fixed with nut bolts washers etc. Make Sintex or equivalent complete all as specified and directed with following fitments :- (a) Aluminum bus bar of 100Amps capacity fixed on porcelene insulators and insulated with colour sleeves (04 Nos) and connect suitable for 25Sqmm to 35Sqmm cable Note : Cost of clamps and bus bar strips is inclussive in quoted rate

Supply and fix pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut,100mm height, 65mm dia for 1100 volts grade complete all as specified and directed.

Supply and fix shackle Type, Porcelain, vitreous, white, brown or green insulator including galvanised mild steel straps, washers, insulator bolts, washers and nuts, 1100 volt grade of size 75 mm height and 90mm dia complete all as specified and directed .

Supply and fix in repair danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white, with letters, figures and conventional skull and bones in signal red colour and fixed with M.S. clamps, bolts and nuts of approved size, for LT, 20x15cm size complete all as specified and directed .

Supply and fix spacers/separator PVC with clamping nut bolts suitable for 2 wire complete all as specified and directed .

Supply and fix spacers/separator PVC with clamping nut bolts suitable for 3 wire complete all as specified and directed .

Supply and fix spacers/separator PVC with clamping nut bolts suitable for 4/5 wire complete all as specified and directed .

Material and labour for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr deep below GL with top edge of the plate not less than 1.5 mtr below normal GL and connected to earth plate . Earth plate surrounded by 15 cm thick packed layers of charcoal dust and common salt upto 1.5 meter depth all around the earth plate and connected to earth lead of GI strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel and thimbles and other end of the earth wire connected to Plant/equipment and protected by galvanized iron or steel pipe light grade and water pipe 20mm bore GI medium grade with funnel and wire mesh, including all necessary excavation and earth work PCC chamber in cement concrete 1:3:6 type C-2 and RCC cover and all as shown in electrical plate No 3 of MES schedule Pt I of 2009 and also including making test point for testing of earthing made out of gun metal or phosphorous bronze size 75x75x25 mm complete all as specified and directed . Note : On testing after completion of earthing if desired earth resistance below 5 ohms is not achieved, the earthing will be redone at no extra cost.

Dismantling concrete poles/ struts, any size any type complete all as specified and directed .

Supply and erect Prestressed concrete pole, 9.0 metres long, 102mm x 152mm at top and 102mm x 289mm at bottom, class 10 complete all as specified and as directed. Note : Excavation, earth work and PCC shall be measured and paid separately under relevant item.