Indian Oil Corporation Limited Tender

Servicing of Gate valve of 6" size of RHVLRM line/Foam line/ Water sprinkler line including dismantling of the valve, blinding the piping (if required), cleaning, greasing, oiling, gland packing of valve, I bolt of required sizes repairing and re-erection of the valve complete in all the respect including of all the consumables, labours, tools & tackles required for the work as per direction of Site Engineer/ EIC ,Quaterly basis.

Servicing of Gate valve of 8" size of RHVLRM line/Foam line/ Water sprinkler line including dismantling of the valve, blinding the piping (if required), cleaning, greasing, oiling, gland packing of valve, I bolt of required sizes repairing and re-erection of the valve complete in all the respect including of all the consumables, labours, tools & tackles required for the work as per direction of Site Engineer/ EIC ,Quaterly basis.

Servicing of Gate valve of 10" size of RHVLRM line/Foam line/ Water sprinkler line including dismantling of the valve, blinding the piping (if required), cleaning, greasing, oiling, gland packing of valve, I bolt of required sizes repairing and re-erection of the valve complete in all the respect including of all the consumables, labours, tools & tackles required for the work as per direction of Site Engineer/ EIC ,Quaterly basis.

Removal or Installation of valves up to 10-inch size including transportation either from owners storage point to workshop/worksite including hiring of hydra, tools tackles, labour, etc as per directions of engineer in charge. For removing of valves, it may be required to cut jammed stud &bolts etc.,,

Rewinding of 1-phase/3-phase electrical motors of various voltage grades/makes/types and of following capacities as per the original specifications & types/gauge of rewinding/winding wire, insulation of various points inside slots/overhang and overall final layers of insulation/tapes as per the original motor specifications, after baking to required temperature and applying insulating varnish (Dr-Beck & Co. make & type), providing glass/other types of sleaves on connection wires from inside motor winding to connection plate. The winding, varnishing, tapes and other materials required for completion of this complete job is in the scope of contractor excluding transpor tation to & from Owner’s works to Contractor's rewinding shop. which shall be paid seperately on trip basis.The winding wire will be Devi Dayal make and insulation tapes shall be ISI marked & of reputed manufacturers as per decision of Engineer-in- Charge. This also includes repair/replacement of connection plate completely including insulating sheet, nuts, bolts, washers and other hardwares as per original specifications. This further includes replacement of bearings (DE & NDE) of SKF make & greasing (IOC/HP make Servogem 2 or equivalent). This further includes satisfactory trial of motors at Owner’s premises at No load as well as at Full load. The Contractor will guarantee the rewound motors for satisfactory performance for a period of minimum six months at owner’s premises & if any such rewound motor fails within six months, it is to be rewound again by Contractor free of cost. All complete with labour and materials as per directions of Engineer-in-Charge.Note: Burnt winding wire shall be kept by Contractor. Bearing Shall be supplied by IOCL 1. Motors upto & including 1.5 KW,,

Supply of Spare Parts and PPE

Barrier as per site sample (Make: Pepperl Fuchs)

Contactor as per site sample (4 pole, coil voltage-690V, 5 Amp CE approved with Add on,1 NO and 1 NC, 690V,10 Amp)

Overload Relay 24V DC as per site sample

Relay Card as per site sample

Diode Card as per site sample

SMPS as per site sample (100-230V/24V DC, 5 Amp)

NO/NC block for Push Button as per site sample

Fuse 2A as per site sample

Fuse 4A as per site sample

SFU switch 32 A as per site sample

Selector switch, 4 pole as per site samp

Voltameter 0-500 V non uniform type SR.No.: 180804

BEARING 6205-2Z MAKE SKF as per site sample,

BRG,BALL,SINGLE ROW,SKF-6206 as per site sample,

BRG,BALL,SINGLE ROW,SKF-6207 as per site sample,

BRG,BALL,SINGLE ROW,SKF-6010 as per site sample,

Push Button as per site sample

Indication Lamp as per site sample

Lamp cover as per site sample

MCB 2 pole 6 A as per site sample

MCB 3pole 32 A as per site sample

Thermal overload relay as per site sampl

Proximity switch (sensor) as per site sample,

Circlip as per site sample

Oil seal as per site sample

Gear assembly including worm shaft & rack and pinion as per site sample (SS 304),

Fan cover as per site sample

All deployed workers must be provided with PPE kit of 1 helmet,1 set of safety shoe & socks ,1 set of gumboot & 2 set of IFR suit per year.,,