Indian Oil Corporation Limited Tender
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Indian Oil Corporation Limited - IOCL Tender
Building Construction
Eprocure
Opening Date30 Aug 2024
Closing Date14 Oct 2024
Tender Amount₹ 17,40,03,588
Costs
EMD
₹ 4,36,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PLHO_180143_1Bid Award Id
ViewTender No
PLCC/VAD-Colony/CL/24088Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed by the Engineer-in-Charge : In all kinds of Soil,,,,,,
1210
293812
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed by the Engineer-in-Charge : In Ordinary Rock,,,,,,
845
397663
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, for any lead and lift.,,,,,,
1572
461031
-
... More
Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor's own borrow areas including royalty, with all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moisture content to 90% of Proctor's density, consolidation and rolling with 8 to 10 tonne power roller in layers not exceeding 20 cm thickness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.,,,,,,
76
41902
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.,,,,,,
185
482451
-
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material : Beyond 30 cm girth upto and including 60 cm girth,,,,,,
10
5081
-
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material : Beyond 60 cm girth upto and including 120 cm girth,,,,,,
10
22624
-
... More
Extra for levelling & neatly dressing of disposed soil completely as directed by the Engineer-in-Charge.,,,,,,
473
41899
-
... More
Supplying all labour, materials, tools, chemicals, spray pumps etc. for making pre-constructional anti-termite treatment & creating a continuous chemical barrier under & all round the column pits, wall trenches, top surface of plinth filling, junction of wall & floor, along the exterior perimeter of the building, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of Site Engineer. [Note: Total plinth area of the building shall be measured for payment].: ,,,, ,,
545
182685
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources],,,,,,
67
607327
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources],,,,,,
142
1186775
-
... More
Centering and shuttering including strutting, propping etc. and removal of formwork for :Foundations, footings, bases for columns,,,,,,
189
71886
-
... More
"Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per directions of the Engineer-in-Charge. [Note : Minimum Cement content considered in this item is @ 380 kg/cum.] : - All work up to plinth level : ",,,,,,
384
4273143
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per directions of the Engineer-in-Charge. [Note : Minimum Cement content considered in this item is @ 380 kg/cum.] : - All works above plinth level upto floor V level,,,,,,
1152
14979263
-
... More
"Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete. ",,,,,,
378
143772
-
... More
"Centering and shuttering including strutting, propping etc. and removal of form for all heights : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. ",,,,,,
2074
1687353
-
... More
"Centering and shuttering including strutting, propping etc. and removal of form for all heights : Columns, Pillars, Piers, Abutments, Posts and Struts. ",,,,,,
2442
2392386
-
... More
"Centering and shuttering including strutting, propping etc. and removal of form for all heights : Lintels, beams, plinth beams, girders, bressumers and cantilevers. ",,,,,,
4328
3190316
-
... More
"Centering and shuttering including strutting, propping etc. and removal of form for all heights : Suspended floors, roofs, landings, balconies and access platform. ",,,,,,
4299
3978308
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights : Stairs, (excluding landings) except spiral-staircases,,,,,, ,,,,,,
121
100551
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete for all levels, Thermo-Mechanically Treated bars of grade Fe-500D or more. Laps shall be done with Couplers of approved quality as directed by Engineer - in - Charge. Measurement of appropriate lap length shall be done in lieu of Couplers. ,,,,,,
203872
22728955
-
... More
Providing and laying autoclaved aerated cement blocks masonry with 150 mm/ 200 mm / 230 mm / 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per directions of Engineer-in-Charge. [Note: The payment of RCC band and reinforcement shall be made for seperately].,,,,,,
670
5937611
-
... More
Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources] including Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.,,,,,,
10
7062
-
... More
Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, cable trench, etc., with bricks of class designation 50 laid to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.,,,,,,
250
208016
-
... More
Brick work with common burnt clay/ Fly Ash F.P.S. (non modular) bricks of class designation 7.5 in foundation, Plinth and in Superstructure in Cement Mortar 1:4 (1 Cement : 4 Coarse Sand) as directed including, raking of joints, curing etc. complete,,,,,,
30
255419
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite (of any colour and shade) for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels :Area of slab up to 0.50 sqm,,,,,, ,,,,,,
887
4994954
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite (of any colour and shade) for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels :Area of slab over 0.50 sqm or as required.,,,,,, ,,,,,,
248
1327116
-
... More
Providing edge moulding to 18 mm thick Marble/ Granite for Fascia and other specified directed items with double / full rounded moulding or special moulding only in certain directed areas e.g., kitchen platform fascia, stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by the Engineer-in-Charge :Granite work.,,,,,, ,,,,,,
268
134639
-
... More
Extra for fixing marble/ granite stone, over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive, including cleaning etc. complete.,,,,,,
801
464442
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.,,,,,,
15
14712
-
... More
Mirror polishing on Marble work/ Granite work/ Stone work wherever required to give high gloss finish complete.,,,,,,
1135
557711
-
... More
Kota Stone Slabs as platform, pillars etc. 25 mm thick over cement mortar base or adhesive as required joined with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand) in Single Piece upto 1.05 m or more as required for Platforms, Shelves, Treads, Risers etc.,,,,,,
317
662415
-
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 Kg/sqm mixed with water proofing cement compound @ 0.126 Kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. : ,,,,,, ,,,,,,
225
139881
-
... More
Providing and laying cinder in Toilet/ Kitchen floor after waterproofing with cinder size not more than 100x100 mm in compact manner, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.,,,,,, ,,,,,,
25
108508
-
... More
Grading roof & sunk for water proofing treatement with: Cement Concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size),,,,,, ,,,,,,
44
406835
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification. [Note: Unit "KG" shall mean "PER KG PER 50 KG OF CEMENT"].,,,,,, ,,,,,,
304
22954
-
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) After surface preparation, first layer of slurry of cement @ 0.488 Kg/sqm mixed with water proofing cement compound @ 0.253 Kg/sqm. (b) Laying second layer of fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) Third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 Kg/sqm mixed with water proofing cement compound @ 0.670 Kg/sqm and coarse sand @ 1.289 Kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) Fourth and final layer of brick tiling with cement mortar (which will be paid for separately). For the purpose of measurement the entire treated surface will be measured. : ,,,,,, ,,,,,,
887
619486
-
... More
Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels/ subway and bridge deck etc., prepared by mixing in the ratio of 5:2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3:1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and directions of the Engineer-in-Charge. The product performance shall carry guaranteed for 10 years against any leakage : for all Surfaces in two coats @ 0.70 kg per sqm per coat : ,,,,,, ,,,,,,
129
83445
-
... More
Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.,,,,,,
1152
1584823
-
... More
Providing and laying ceramic glazed floor tiles - Matt / Anti Skid / Gloss / Zero Reflective as approved by EIC of size 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints with white cement and matching pigment, etc. complete. : Tile Size, thickness, sample as directed by Architect or Engineer-in-Charge,,,,,, ,,,,,,
223
275997
-
... More
Providing and laying Double Charge Vitrified Tiles (polished finish) of specified sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacture, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, levelling system and rubber mallet for placing the tiles gently and easily :Size of Tile 800 x 800 mm,,,,,,
2291
4378475
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with white cement & matching pigments etc. complete :Size of Tile 800x800 mm,,,,,,
197
475273
-
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 Kg of organic coated filler of desired shade (0.10 Kg of hardener and 0.20 Kg of resin per Kg), including filling/ grouting and finishing complete as per directions of the Engineer-in-Charge :Size of Tile 800x800 mm,,,,,,
2488
801132
-
... More
Crazy ceramic tile flooring, with under layer 12 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), with joints not exceeding 5 mm, including filling the gaps with ordinary cement mixture & mixing with synthetic polyester fibre, triangular in shape having specific gravity of 1.34 to 1.40, cross section size ranging from 10 to 40 micron & length upto 6 mm , mixing fibre @ 125 grams per 50 kg of cement in cement mortar, including providing and mixing water proofing material in mortar @ 1 Kg per 50 Kg of cement, all complete as per directions of the Engineer-in-Charge.,,,,,, ,,,,,,
598
587410
-
... More
Providing and fixing Glass mossaic tiles on finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design , fixing in approved design. The glass mosaic tiles shall be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 Kg/sq.m. and grouting of the same. All complete as per the directions of Engineer-in-Charge.,,,,,, ,,,,,,
68
295125
-
... More
Providing and laying Burnt Terracota Tiles / Mangalore / Decorative Tiles 12 mm thick for facia, over walls, sloping RCC Roofs etc. at all levels and locations laid over and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colour as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.,,,,,, ,,,,,,
40
90980
-
... More
Providing and fixing 2nd Class Teak Wood Frame of MIN. Size 150 mm x 70 mm with ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :35 mm thick with all heavy type S S fixtures and fastening including ISI marked Stainless Steel butt hinges, handles, Aldrops, Latches, Door Stoppers, Magic Eye Piece (Peep Hole), Safety Chain, Night Latch Internal Lock with Both side handles,including French Polishing etc. complete as directed by Enginner in Charge.,,,,,,
41
433068
-
... More
Providing and fixing Safety door with One leaf / two leaves as directed for shutters having 2nd Class Teak wood Paneled doors with laminated Plywood Panels for bottom half and S.S. 304 Plate with CNC Cut as per the design and pattern provided for the top half of the door with all heavy type S S fixtures and fastening including ISI marked Stainless Steel butt hinges, handles, Aldrops, Latches, Door Stoppers, including French Polishing etc. complete as directed by Enginner in Charge.,,,,,,
37
525608
-
... More
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with IS:3564 embossed on the body, door weight up to 36 kg to 80 kg), with double speed adjustment with necessary accessories and screws etc. complete.,, ,,,,
189
214913
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :35 mm thick including ISI marked Stainless Steel butt hinges with all heavy type S S fixtures and fastening including Mortice Lock with Both side handles, French Polishing etc. complete,,,,,,
268
1564970
-
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. With 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to Table-3 of IS:14856, including fixing to frames with all heavy type S S fixtures & fittings. ,,,,,,
2
17300
-
... More
Providing and fixing factory made uPVC white / coloured sliding glazed doors comprising of 5 mm toughened glass and uPVC multi chambered frame, sash and mullion (where ever required)extruded profiles duly reinforced with 1.60+ mm; 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket,stainless steel (SS 304 grade) Sliders, zinc alloy (whitepowder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holesfor fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of requiredsize and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge. Three track, two / four panels sliding glass door panels + one/two sliding S.S. Moquito / Fly net panels with all necessary hardware, fixtures, beads etc. complete.,,,,,,
112
965164
-
... More
Providing and fixing factory made uPVC white / coloured sliding glazed windows comprising of 5 mm float glass and uPVC multichamberedframe, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60+ mm; 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket,stainless steel (SS 304 grade) Sliders, zinc alloy (whitepowder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holesfor fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of requiredsize and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge. Three track, two / four panels sliding glass window panels + one/two sliding S.S. Moquito / Fly net panels with all necessary hardware, fixtures, beads etc. complete.,,,,,,
297
2585693
-
... More
Providing and fixing factory made uPVC white colour fixed / openable glazed windows comprising of 5 mm float glass and uPVC multi chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60+mm; 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (whitepowder coated) casement handles, G.I fasteners 100 x 8 mm sizefor fixing frame to finished wall, plastic packers, plastic caps andnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holesfor fixing hardware's and drainage of water etc. After fixing framethe gap between frame and adjacent finished wall shall be filledwith weather proof silicon sealant over backer rod of requiredsize and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge. Two track single / two panels openable glass window panels and Single / two panels openable S.S. Mosquito / Fly Net panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (big series)frame 67 x 50 mm, sash 46 x 62 mm & mullion 47 x 68mm all having wall thickness of 1.9mm; 0.2 mm and single glazing bead of appropriate dimension.,,,,,,
25
295796
-
... More
Providing and fixing factory made uPVC white colour fixed / openable louvered venilators / windows comprising of 4 mm float glass and uPVC multi chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60+mm; 0.2 mm thick galvanized mild steel section made from roll forming process ofrequired length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (whitepowder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps andnecessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (ifrequired) shall be also fusion welded including drilling of holesfor fixing hardware's and drainage of water etc. After fixing framethe gap between frame and adjacent finished wall shall be filledwith weather proof silicon sealant over backer rod of requiredsize and of approved quality, all complete as per approveddrawing & direction of Engineer-in-Charge. Openable Type Louvers with all required mechanism in place included.,,,,,,
33
281263
-
... More
Providing and fixing, on fixed glazing/ doors/ window panes, sun control film "HP NATURAL 35 SAFETY COMBINATION FILM-4Mil" of M/s. GARWARE or approved equivalent make and shade, all complete as per manufacturer's specification and as per directions of the Engineer-in-Charge.,,,,,,
499
668063
-
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete : Fixed to openings/ wooden frames with rawl plugs screws etc.,,,,,,
9750
2388783
-
... More
Providing and fixing 12 mm thick frameless toughened glass partly fix & partly openable door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement, all necessary fittings and making necessary holes etc. for fixing required door fittings, all complete as per directions of the Engineer-in-Charge.,,,, ,,
419
2488494
-
... More
Providing and fixing chromium plated brass curtain rods having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves incl. side decorative bracekts / pipe holders etc., wherever necessary complete :25 mm dia.,,,,,,
330
211568
-
... More
Providing and fixing in position built-up cupboard, internal framework, shelves, drawers, layon slides partitions and shutters 19 mm thick Plywood of BWP Grade Laminated with o/s min. 1.0 mm & i/s min. 0.80 mm thk. laminate, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including piano type hinges 19x25 mm, best quality teak wood lipping around the shutter edges, 20 mm diameter chrome plated M.S. coat hanger rod, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150 mm x 19 mm diameter (Ref. Make - DORSER, Model - IP 06 PR SS or approved equivalent) complete as per drawing including spirit polishing/ enamel painted on lipping in required shade matching to the laminate etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): HFor room wardrobes./
318
5064482
-
... More
Providing and fixing in position built-up cupboard, shutters, drawers as required with 19 mm thick Plywood of BWP Grade with o/s min. 1.0 mm & i/s min. 0.80 mm thk. laminate, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including piano type hinges 19x25mm, S.S. soft closing heavy type telescopic drawer channels, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent) and frame size 50x35 mm in 2nd class teak wood as per drawing complete including spirit polishing/ enamel painted on frame & lipping in required shade matching to the laminate, complete in all respects and P&F readymade S.S. (304 Grade) Modular Kitchen Basket and accessories such as right angle basket, Kitchen Utensil Basket, Dinner Set Basket, Kitchen Grain Basket, Multipurpose Basket incl. finishing and fittings with necessary S.S. Nuts, Bolts, Screws, telescopic channels etc. all complete inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): HFor kitchen under Platform cabinets./
67
1505643
-
... More
Providing and fixing in position built-up cupboard, internal framework, shelves, drawers, layon slides partitions and shutters 19 mm thick Plywood of BWP Grade with o/s min. 1.0 mm & i/s min. 0.80 mm thk. laminate, Decorative Type (BWP-DEC) of approved quality or equivalent stamped with IS-1659:2004 (Latest Edition) and and pre-lamination should conform to IS-2046:1995 (Latest Edition) and 3 mm thick teak wood lipping at all edges of the board with polish/ enamel paint fixed with water resistant adhesive on inside and external face as per approved shade including piano type hinges 19x25 mm, best quality teak wood lipping around the shutter edges, magnetic ball catchers, brass tower bolt, knobs, handles with S.S. roses 150mm x 19mm diameter (Ref. Make - DORSET, Model - IP 06 PR SS or approved equivalent) complete including spirit polishing/ enamel painted on lipping in required shade matching to the laminate etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Measurement of cupboard shall be taken as front area of shutters only): HFor kitchen wall cabinets. /
19
270675
-
... More
Providing and fixing Stainless Steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of the Engineer-in-Charge. [Note: For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.],,,,,,
4450
3419241
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] :Powder coated aluminium (Minimum thickness of powder coating 50 micron) ,,,,,,
1625
990081
-
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, bolting, welding, fixing in position and applying a priming coat of approved steel primer all complete.,,,,,,
1010
116045
-
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.,,,, ,,
6
69464
-
... More
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix in C M 1:4 (1 cement : 4 fine sand),,,,,,
8693
3573899
-
... More
Providing 12 mm cement plaster of mix in 1:4 (1 cement : 4 fine sand),, ,,,,
3598
1282013
-
... More
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge.,,,,,,
4733
2632517
-
... More
Providing Heritage Grannular Rustic Textured or Grit Textured wall finishing over existing base of 18 mm thick smooth plaster without any keying on plastered surface. Texture Plaster coat with Primer Coat overlaid by Acrylic coated Heritage Grannular Rustic Textured or Grit Textured in fair homogeneous coating in clear matt finishes in approved design and colour using Acrylic co-polymer bonding agent for all height etc complete.,,,,,,
361
237270
-
... More
Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge.,,,,,,
392
112295
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.,,,,,, ,,,,,,
12291
1889645
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour in Two Coats over Priming coats with water thinnable cement primer on primer on walls, slabs etc. of approved brand and manufacturer, having low VOC content - less than 50 grams/litre.,,,,,, ,,,,,,
12291
2853975
-
... More
Finishing walls with 100% Premium Acrylic Emulsion paint having VOC less than 50 gms/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives : for New work (two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm).,,,,,, ,,,,,,
4733
923916
-
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture.,,,, ,, ,,,,,,
501
84148
-
... More
Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sq.m., both side inclusive) consisting of main 'T' runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross 'T' of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main 'T' at 600 mm c/c to form a grid of 1200x600 mm and secondary cross 'T' of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main 'T' runners to be suspended from ceiling using G.I. slotted cleats of size 27x37x25x1.6 mm fixed to ceiling with 12.5 mm dia. and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised butterfly level clips of size 85x30x0.8 mm spaced at 1200 mm center to center along main 'T', bottom exposed width of 24 mm of all 'T'-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by the Engineer-in-Charge :12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS:2095 (Part-1) and laminated with white 0.16 mm thick fire retardant PVC film on the face side and 12 micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.,,,,,, ,,,,,,
167
419430
-
... More
Providing and fixing decorative special coloured vitreous china clay wall mounted European type Water Closet (Ref. Make: HINDWARE, Model: Cat No.-20028 or equivalent approved) with dual flushing cistern (Ref. Make: HINDWARE, Model: Cat No.-21038 or equivalent approved) of approved shade including matching shade of plastic seat and lid cover, fittings, connectors, necessary hanging arrangement, rubber buffers etc., including cutting and making good the wall and floors wherever required, making connections to soil/ vent pipe, etc. complete in all respects inclusive of cost of all required fittings, fixtures, materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.,,,,,, ,,,,,,
42
1205920
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.,,,,,, ,,,,,,
1
12498
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, Bottle Trap, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap.,,,,,, ,,,,,,
7
21964
-
... More
Providing and fixing glazed vitreous China Counter Top / Table Top wash basin of 560x410 mm size (Ref. Make: HINDWARE, or equivalent approved) with M.S. or C.I. brackets painted white, C.P. brass chain with rubber plug, 32mm C.P. brass waste coupling of standard pattern, 32mm C.P. brass bottle trap and union, 32mm diameter C.P. pipes to wall flange etc. including cutting and making good the walls & floors wherever required, etc. complete in all respects inclusive of cost of all required fittings, fixtures, materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge : Special Delux Colour,,,,,, ,,,,,,
15
170676
-
... More
Providing and fixing special coloured glazed vitreous China clay pedestal type aesthetic Wash Basin of 580x500 mm size (Ref. Make: HINDWARE, Model: Cat No.-10050 or equivalent approved) with M.S. or C.I. brackets painted white, C.P. brass chain with rubber plug, 32mm C.P. brass waste coupling of standard pattern, 32mm C.P. brass bottle trap and union, 32mm dia C.P. pipes to wall flange etc., including cutting and making good the walls & floors wherever required, etc. complete in all respects inclusive of cost of all required fittings, fixtures, materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.,,,,,, ,,,,,,
35
409983
-
... More
Providing and fixing following C.P. Brass central hole wash basin mixer with copper pipe/ pipes and brass nuts of size 15mm, etc. complete including cutting & making good the walls wherever required complete in all respects as per specifications and directions of the Engineer-in-Charge : C.P. central hole wash basin mixer (Ref. Make: JAQUAR, Model: Cat. No.-167 or approved equivalent) with 1 no. x 10mm diameter & 450mm long copper pipe.,,,,,, ,,,,,,
50
440870
-
... More
Providing & fixing Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube 8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or a pproved equivalent) with all fittings, fixtures, making good etc. all complete.,,,,,, ,,,,,,
42
157322
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete :Semi Rigid Pipe :32 mm diameter,,,,,, ,,,,,,
73
8548
-
... More
Providing and fixing Quartz Double Bowl Kitchen sink with drain board made of Premium 12 mm thick Quartz of Overall Dimensions: 1146 x 493 x 230 having Big Bowl Size: 395 x 415 mm and Small Bowl Size: 290 x 290 mm in Kitchen Granite Platform as required including painting of fittings and brackets, cutting and making good the walls / granite including S.S. Sink Couplings, Double Bowl Connector, Waste Pipe, Multifunction Dish Grid (Vegetable Strainer) etc. all including and complete in colour, design and fixture as directed by Engineer - in - Charge.,,,,,, ,,,,,,
15
268544
-
... More
Providing and fixing the C.P. brass double coat hook (Ref. Make: JAQUAR, Model: Cat. No. 1161 or approved equivalent). washroom fittings, complete in all respects, inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge :,,,,,, ,,,,,,
110
150435
-
... More
Providing and fixing approved quality C.P. brass Towel Rail of 20mm diameter & 600mm long including C.P. brass brackets fixed with wooden cleats and C.P. brass screws etc. complete.,,,,,, ,,,,,,
40
69215
-
... More
Providing and fixing C.P. brass Towel Ring 300mm diameter, fixed to P.V.C. cleats with C.P. brass screws, etc. complete.,,,,,, ,,,,,,
60
107795
-
... More
Providing & fixing 6mm thick, copper back finish, looking mirror of required size, made of float sheet glass of best quality & approved make, over 12mm thick marine board fixed to rawl plug with round head screws & washers including teakwood beading with melamine polish all around, complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.,,,,,, ,,,,,,
35
122838
-
... More
Providing and fixing toilet paper holder : C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent).,,,,,, ,,,,,,
42
32737
-
... More
Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge : Stainless steel liquid soap container (spring loaded push type) with lid and brackets fixed to P.V.C. cleats with C.P. brass screws, etc.,,,, ,, ,,,,,,
57
152951
-
... More
Providing and fixing C.P. Brass / SS soap Dish Holder having min. length of 138 mm, min. breadth 102 mm, min. height of 75 mm with concealed fitting arrangements, weighing not less than 106 gms.,,,,,, ,,,,,,
42
7318
-
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete,,,,,, ,,,,,,
57
64069
-
... More
Providing and fixing brass stop cock of approved quality :15 mm nominal bore,,,,,, ,,,,,,
42
16967
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 :15 mm nominal bore,,,, ,, ,,,,,,
145
103002
-
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms :15 mm nominal bore,,,,,, ,,,,,,
45
37181
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter,,,,,, ,,,,,,
40
10083
-
... More
Providing and fixing 15mm diameter C.P. brass shower arm (Ref. Make: JAQUAR, Model: Cat. No. 477 + 493 or approved equivalent) with concealed stop cock (Ref. Make: JAQUAR, Model: Cat. No. 083 or approved equivalent) including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. as per specifications and directions of the Engineer-in-Charge.,,,,,, ,,,,,,
40
417822
-
... More
Providing and fixing 15mm diameter C.P. brass shower mixer 3 in 1 System (Ref. Make: JAQUAR, Model: Cat. No. 273 or approved equivalent) and shower (Ref. Make: JAQUAR, Model: Cat. No. 477 + 493 or approved equivalent) including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.,,,,,, ,,,,,,
40
598403
-
... More
Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge :Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent),,,,,, ,,,,,,
80
156164
-
... More
Providing and fixing 50 MM Nominal bore C.P.V.C. Valve of approved quality with / without threading / screwed ends :,,,,,, ,,,,,,
9
10445
-
... More
Providing and fixing 25 MM Nominal bore C.P.V.C. Valve of approved quality with / without threading / screwed ends :,,,,,, ,,,,,,
60
39829
-
... More
Providing and fixing 50 MM Nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) :,,,,,, ,,,,,,
5
5803
-
... More
Providing and fixing 25 MM Nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) :,,,,,, ,,,,,,
15
9957
-
... More
Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directions of the Engineer-in-Charge :15 mm nominal dia pipes,,,,,, ,,,,,,
784
428839
-
... More
Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per directions of the Engineer-in-Charge :25 mm nominal dia pipes,,,,,, ,,,,,,
279
209347
-
... More
External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge :40 mm nominal dia pipes,,,,,, ,,,,,,
632
452952
-
... More
External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per directions of the Engineer-in-Charge :50 mm nominal dia pipes,,,,,, ,,,,,,
282
298093
-
... More
Providing & Laying in ground uPVC Pipes (110 mm diameter, single socketed) Sch-40 including jointing with seal ring leaving 10 mm gap for thermal expansion with all bends, elbows, couplers, Tees etc. complete for Water Supply Line as directed.,,,,,, ,,,,,,
370
150705
-
... More
Supplying and fixing 100mm diameter (Nominal Bore) Gun Metal Gate Valve with wheel of approved quality & make inclusive of cost of all labour, materials, tools, etc. complete as directed by the Engineer-in-Charge.,, ,,,, ,,,,,,
2
62037
-
... More
Providing and fixing square mouth S.W. gully trap class SP-1 complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside dimension). The brick masonary chamber shall be constructed with common burnt clay / Fly Ash F.P.S. (Non-modular) bricks of class designation 7.5. [Note: Weight of the cover shall not less than 4.50 kg and weight of the frame shall not be less than 2.70 kg as per standard design] :100x100 mm size P-type,,,,,, ,,,,,,
17
52367
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay / Fly Ash F.P.S. (Non-modular) bricks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 Kg and weight of frame 15 Kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :Inside dimensions 455x610 mm and for Required Depth for single pipeline
36
385339
-
... More
Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coarse aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge :For 50 Users,,,,,, ,,,,,,
2
380273
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design :With common burnt clay/ Fly Ash F.P.S. (Non-modular) bricks of class designation 7.5,,,,,,
2
67507
-
... More
Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125mm C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.,,,,,, ,,,,,,
129
269642
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality :Rectangular shape 600x450 mm internal dimensions,,,,,, ,,,,,,
3
4922
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent tripple layered), IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.,,,,,, ,,,,,,
40000
470112
-
... More
Providing and fixing on wall face / in walls / in floors / in ground as required Unplasticised Rigid PVC (uPVC) pipes 6kg/cm2 (110 mm diameter, single socketed) conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion.Including all fittings and fixtures with Spacer PVC Clamps at every 2.0 m or as directed: for Grey Water, Black Water & Rain Water Lines,,,,,, ,,,,,,
900
366581
-
... More
Providing and laying non-pressure NP-2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :150 mm dia. R.C.C. pipe,,,,,, ,,,,,,
458
282898
-
... More
Providing and laying factory made chamfered edge interlocking Cement Concrete paver blocks in foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & directions of the Engineer-in-Charge :80mm thick Cement Concrete paver block of M-30 grade with approved colour, design & pattern.,,,,,, ,,,,,,
1262
1605895
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Precast C.C. kerb stones shall be approved by the Engineer-in-Charge.],,,,,, ,,,,,,
4
44737
-
... More
Providing and fixing of graphics/ signages (including printing of direction, entry, exit, department name, etc.) with self glowing/ back lit signs 12"x6" as per specification and directions of the Engineer-in-Charge.,,,,,, ,,,,,,
45
97041
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within all lead & lift as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge],,,,,, ,,,,,,
78
263990
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within all lead & lift as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] : Nominal concrete 1:4:8 or leaner mix (including equivalent design mix),,,,,, ,,,,,,
43
61596
-
... More
Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations],,,,,, ,,,,,,
10
19627
-
... More
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in : Channels, angles, tees, Pipes and flats and any attached element,,,,,, ,,,,,,
200
450
-
... More
Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations.(3) Adequate safety precautions shall also be taken care before commencement of any activity] : Bituminous Road,,,,,, ,,,,,,
325
133070
-
... More
Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge.,,,,,, ,,,,,,
320
11985
-
... More
Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per directions of the Engineer-in-Charge.,,,,,, ,,,,,,
285
35789
-
... More
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the directions of the Engineer-in-Charge. [Note: Old CC paver blocks shall be supplied by the department free of cost].,,,,,, ,,,,,,
285
123371
-
... More
Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement : 3 coarse sand), including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5 mm), including making drainage opening wherever required etc. complete as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Old kerb stones shall be supplied by the department free of cost.],,,,,, ,,,,,,
320
35441
-
... More
Preparation and consolidation of sub-grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth with lead up to 50 metres.,,,,,, ,,,,,,
475
99415
-
... More
Supplying, Stacking, Laying, spreading and compacting stone aggregate of directed & specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/ vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening/ binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.,,,,,, ,,,,,,
143
524864
-
... More
Providing and applying tack coat using hot straight run bitumen of grade VG-10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : on W.B.M. @ 0.75 kg/sqm,,,,,, ,,,,,,
475
26668
-
... More
2.5 cm premix carpet surfacing with 2.25 cum and 1.12 cum of stone chippings of 13.2 mm and 11.2 mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively, including a tack coat with hot straight run bitumen, including consolidation with road roller of 6 to 9 tonne capacity etc. complete. : With paving Asphalt grade VG-10 heated and tehn mixed with solvent at the rate of 70 grams per kg of asphalt,,,,,, ,,,,,,
475
131767
-
... More
Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface, including rolling and finishing with road roller all complete. [Note: This item to be operated only with the prior approval of the Engineer-in-Charge].,,,,,, ,,,,,,
475
46745
-
... More
Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per directions of the Engineer-in-Charge and accordance with applicable specifications.,,,,,, ,,,,,,
237
192182
-
... More
Providing and fixing Glow Studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by the Engineer-in-Charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35 (+/-5) degress to base. The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 (Part-4):1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per directions of the Engineer-in-Charge.,, ,,,, ,,,,,,
428
112240
-
... More
Providing and erecting 2.0 metre high temporary barricading at site; each panel of size 2.5m x 2.0m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/ horizontal members/ bracings covered with 1.63mm thick MS Sheet. The steel shall be fixed with 30x5mm MS flat by suitable welding/ riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/ direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously including shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of the Engineer-in-Charge. [Note: One time payment shall be made for providing barricading from start of work till completion of work including shifting. The barricading provided shall remain to be the property of the contractor on completion of the work].,,,,,, ,,,,,,
164
562065
-
... More
Rain Water Harvesting Work
-
-
-
... More
Constructing Masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5,,,,
10
21126
-
... More
Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (Part-I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipment, tools, plants & machineries required for the job, all complete as per directions of the Engineer-in-Charge, up to 90 metre depth below ground level :Rocky strata including boulders :300 mm diameter,,,,
80
130642
-
... More
Providing & Inserting 300 mm diameter casing / strainer pipe for in all soils as directed.,,,,
12
49135
-
... More
Providing and fixing on wall face / in wall / in floor / in ground Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS:13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion.Including all fittings and fixtures with Spacer PVC Clamps at every 2.0 m or as directed,,,,
130
52941
-
... More
Providing and Installing Rainwater Filter with two stages of filtration, (i) SS 304 Non-clogging filter element (ii) Polymeric filter element; having 110 mm inlet and outlet dia, with transparent lid suitable for Roof area up to 150 sqm per filter: NRN 220 or equivalent as directed. ,,,,
5
40120
-
... More
LIFT work
-
-
-
... More
Providing, Supplying, Installing, Testing & Commissioning 8 Passenger Auto Lifts, Gearless Machine Roomless Type, min. load capacity 544 kg, min. speed 1m/sec., Micro processor Based Control, Compatible with : 415 Volts, 3 Phase AC power supply, Travel : G+5 with 6 Stops 6 Openings, Duplex Operations with ON/OFF switch, with Infrared Curtain Power Operated Automatic Doors etc. with all the necessary structure, Cabling, and accessory systems, Licensing, Authority Approvals etc. included. The Final Specifications, GA Drawing, Finishes etc. to be approved by the EIC.
1
2156414
-
... More
Providing, Supplying, Installing, Testing & Commissioning 13/15 Passenger Auto Lifts, Gearless Machine Roomless Type, min. load capacity 884/1020 kg, min. speed 1m/sec., Micro processor Based Control, Com patible with : 415 Volts, 3 Phase AC power supply, Travel : G+5 with 6 Stops 6 Openings, Duplex Operations with ON/OFF switch, with Infrared Curtain Power Operated Automatic Doors of min. opening 1.00 m or as directed etc. with all the necessary structure, Cabling, and accessory systems, Licensing, Authority Approvals etc. included. The Final Specifications, GA Drawing, Finishes etc. to be approved by the EIC. ,, ,,
1
2496844
-
... More
FIre Fighting Works
-
-
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 100mm dia.,,,,,, ,,,,,,
114
353596
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 80mm dia.,,,,,, ,,,,,,
23
52632
-
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 50mm dia.,,,,,, ,,,,,,
54
83975
-
... More
"Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 25mm dia. ",,,,,, ,,,,,,
47
42450
-
... More
Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISi marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required : Single headed Stainless steel.,,,,,, ,,,,,,
6
44715
-
... More
"Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the followinq as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS:12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30m pipe included in the item. ",,,,,, ,,,,,,
6
63187
-
... More
"Supply Installing Testing & Commissioning of M.S. Hose Box to accommodate of 1-Nos 15-Mtr. length Hose Pipe & 1-No. of Branch Pipe with Nozzle, with necessary fabrication support and joints. ",,,,,, ,,,,,,
6
9770
-
... More
"Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Stainless Steel (Grade 304) ",,,,,, ,,,,,,
6
32398
-
... More
"Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required: Stainless Steel (Grade 304) ",,,,,, ,,,,,,
6
12105
-
... More
Suplying Installing Testing and Commissionning of 20mm dia S.S. ball valve incl. labour for fixing etc. complete.,,,,,, ,,,,,,
6
7327
-
... More
"Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISi marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100mm dia. ",,,,,, ,,,,,,
4
32374
-
... More
"Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISi marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 80mm dia. ",,,,,, ,,,,,,
1
6048
-
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISi marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 50mm dia.,,,,,, ,,,,,,
2
9187
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber Qasket, GI bolts, nuts, washers etc.as required : 100mm dia.,,,,,, ,,,,,,
2
26829
-
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber Qasket, GI bolts, nuts, washers etc.as required : 80mm dia.,,,,,, ,,,,,,
1
9336
-
... More
"Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange: 100mm dia. ",,,,,, ,,,,,,
1
8089
-
... More
"Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: 4 way - 100mm dia M.S. Pipe ",,,,,, ,,,,,,
1
16964
-
... More
Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories : Pendent Sprinkler,,,,,, ,,,,,,
40
25347
-
... More
"(A) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump suitable for automatic operation and consistting of following, complete in all respects, as required: (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (C) Suitable HP Squirrel cage induction motor, TEFC, syncronous speed 1500RMP, suitable for operation on 415 volts, 3 phase 50Hz, AC supply with IP55 protection for enclosure, horizontal foot mounted type with Class- 'F' insulation, conforming to IS -325. (D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered with anti vibration pads. : H1620 lpm at 56m head",,,,/,, ,,,,,, ,, ,,,,,,
1
345115
-
... More
"(A) Supplying, installation, t"(A) Supplying, installation, testing and commissioning of electric driven Terrace Pump suitable for automatic operation and consisting of following, complete in all respects as required. (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS: 1520. (C) Suitable HP squirrel cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class - 'F' insulation, conforming to IS: 325. (D) M.S. fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered and with anti vibration pads.: H900 lpm at 35 m Head./",,,,,, ,,,,,,
1
123655
-
... More
Fully Automatic Star/Delta Starter with suitable rating compatible with the Main Fire Pump with Overload Protection, Current Sensing Type preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/Off Operation.,,,,,, ,,,,,,
1
9227
-
... More
"Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. ",,,,,, ,,,,,,
6
3576
-
... More
"Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. ",,,,,, ,,,,,,
6
2076
-
... More
"Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, inter connections as reauired. ",,,,,, ,,,,,,
1
10763
-
... More
"Supplying & laying of 2 x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. ",,,,,, ,,,,,,
50
10500
-
... More
"Providing & fixing of pressure switch in M.S. pipe line including connection etc. as required. ",,,,,, ,,,,,,
1
1876
-
... More
Supply & Installing of ABC Type - 6 Kg, Capacity Fire Extinguisher as per IS - 2171 ISI - mark , with necessary Fittings etc. complete. ,,,,,, ,,,,,,
20
51566
-
... More
Supply & Installing of Gas Co2 Type–4.5 Kg. Capacity Fire Extinguisher as per IS And ISI - mark, with necessary Fittings etc. complete.,, ,,,, ,,,,,,
20
141128
-
... More
Suplying, Installing, Testing of Photoluminescent Signages of size 300 X 100 mm (Glow in the Dark) including carting, installing etc. Complete (MCP, Hydrant, Hose box, Hose reel, Extinguishers, Fire Lift, Floor Indication etc.),,,,,, ,,,,,,
62
15985
-
... More
Providing and fixing Pressure Relief Valve 80 mm / 100 mm dia. of approved quality and Pressure Rating with bolts, nuts, rubber insertions and all accessories, fixtures etc. complete.,,,,,,
6
68428
-
... More
"(A) Supplying, installation, testing and commissioning of Electric driven HPressurisation Pump/ suitable for automatic operation and consistting of following, complete in all respects, as required: U H(Jockey Pump)// (B) Horizontal type, multistage, centrifugal, pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. (C) Suitable HP Squirrel cage induction motor TEFC Type suitable for operation on 415 volts, 3 phase 50Hz, AC supply with IP55 protection for enclosure, horizontal foot mounted type with Class- 'F' insulation, conforming to IS -325. (D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (E) Suitable cement concrete foundation duly plastered with anti vibration pads. : H300 lpm at 56m head",,/,,,, ,,,,,,
1
139882
-
... More
Solar Works
-
-
-
... More
Supplying, Installing, Testing & Commissioning Solar Power Generation System on Terrace including Mono Bi-Facial 540 Wp Panels, Solar Inverter, Mounting Structure and Balance of Components, with Power Optimizer / Micro Inverter for Monitoring.,,,,
60
5862240
-
... More
CCTV Networking Works
-
-
-
... More
Supplying, Installing, Testing & Commissioning 5 Port LAN Switch including power Adapter, Plug Point etc. all complete as directed by Engineer in Charge.,,,,
16
23977
-
... More
Supplying, Installing, Testing & Commissioning Cat-6 LAN Socket Cat-III - modular type accessories for uPVC snap-on adaptable trunking / Pop up Box with required items erected with necessary connection as directed by Engineer in Charge,,,,
75
48710
-
... More
Supplying, Installing, Testing & Commissioning approved make CAT - 6 shielded LAN cable including providing and laying 25 mm medium class PVC conduit including all accessories in surface / recess including painting in case of surface conduit or cutting the wall and making good the same in case of recessed conduit including cable connectors, ferules, sockets as required and as directed by Engineer in Charge.,,,,
1450
422463
-
... More
Supplying, Installing, Testing & Commissioning IP Type Dome Cameras with Camera Boxes, mounting, connection, etc. all complete with resolution, specifications as directed by Engineer in Charge,,,,
9
49489
-
... More
Supplying, Installing, Testing & Commissioning IP Type Bullet Cameras with Camera Boxes, mounting, connection, etc. all complete with resolution, specifications as directed by Engineer in Charge,,,,
6
33842
-
... More
Supplying, Installing, Testing & Commissioning 32 Ch. NVR with stabilizer, 20 TB single or 10 TB x 2 Harddisk for Recording backup, Sintex (or equivalent) Junction Box, 12 U Rack including power adapter, plug point, all installation,mounting etc. all complete with compatible specifications as directed by Engineer in Charge.,,,,
1
96925
-
... More
Supplying, Installing, Testing & Commissioning 24 Port PoE Switch with mounting, power adapter, plug point etc. all complete as directed by Enginner in Charge.,,,,
2
175206
-
... More
"Elevator travelling cable for indoor and panoramic elevators. Supports all Cat.6/Class E applications (e.g. 10 Base-T, 100 Base-T, 1000 Base-T, ISDN). Max. channel length 65 m (transceiver to receiver)",,,,
120
508889
-
... More
Wall mounted Cabinet (switching closet) for housing Networking Equipment/ CCTV hardware,optical patch panel & accessories including power distribution boxes, MCBs/ Isolator Switches, required installation materials as per tender specifications,,,,
1
67310
-
... More
Supply and installation of telephone Instrument as per tender specifications,,,,
20
52119
-
... More
Supply of 5 Pair Armoured PIJF Underground Telephone,,,,
200
17685
-
... More
Supply of Compact UPS of suitable rating (minimum 1000 VA) having minimum 15 minutes backup capacity as per tender specifications,,,,
1
41642
-
... More
Supply and installation of MDF (Main distribution frame) /Distribution box of 50 Pair capacity as per specifications,,,,
1
6779
-
... More
Supply and installation of IDF (intermediate distribution frame) / Distribution box of 20 Pair capacity with mounting arrangement as per specifications,,,,
5
27230
-
... More
Erection, Installation, Testing and Commissioning of complete EPABX System which includes commissioning of EPABX, telephone instruments, VOIP box, MDF etc and commissioning of complete voice connectivity between all locations and intra station in different buildings installation of rack, laying of power supply cable from owner's power system to equipment rack, extension of earthing, commissioning of network , all items as per BOM to complete the work in all respect as per scope and technical specifictaions of the tender at Attended Station, Including interfacing with existing EPABX as per scope of work of the tender,,,,
1
19977
-
... More
Supply of 20 Pair Armoured PIJF Underground Telephone Cable as per specifications,,,,
600
119340
-
... More
Supply of 2 Pair unarmoured Telephone Cable as per specifications,,,,
250
16688
-
... More
Client Workstation along with licensed Operating System Software, Keyboard with Joystick along with required cables, connectors, interfaces complete as per specifications.,,,,
1
169887
-
... More
Campus Development Works
-
-
-
... More
Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of earth measured in stacks will be reduced by 20% for payment].,,,,
148
108552
-
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note: Volume of cattle manure measured in stacks will reduced by 8% for payment].,,,,
66
23760
-
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge.,,,,
214
10732
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidation, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR].,,,,
214
15428
-
... More
Filling mixture of earth and sludge or manure in the desired proportion in trenches, flooding with water and leveling. [Note: Cost of supplying earth and sludge or manure and mixing shall be paid separately under relevant items of SOR].,,,,
214
5366
-
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or/ and manure before and after flooding trench with water. [Note: The rate is excluding cost of imported earth, sludge or manure]. ,,,,
330
35415
-
... More
Uprooting weeds from the ground/trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.,,,,
550
3692
-
... More
Preparation of mounds of various size and shape by available excavated/ supplied earth in layers not exceeding 20 cm in depth, breaking clods, watering of each layer, dressing etc., lead up to 50 meter and lift up to 1.5 metre complete as per direction of the Engineer-in-Charge.,,,,
13
8149
-
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete. [Note: Cost of sludge, manure or extra earth shall be paid for separately under relevant item].,,,,
20
6120
-
... More
Digging 60 cm diameter and 60 cm deep holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts. [Note: Cost of manure, sludge or extra good earth if needed shall be paid separately under relevant item].,,,,
40
2495
-
... More
Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in-Charge.,,,,
520
171605
-
... More
Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottle Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.,,,,
80
55040
-
... More
"Providing Circular Cement Concrete pots of specified size, cast with cement concrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 6 mm nominal size), reinforced with 7 Nos (3 Nos horizontal & 4 Nos vertical “U“ shape) M.S. wires of 3.5 mm dia as per design, including required form work, finishing with cement punning on exposed surface, curing for specified period and stacking in required rows & height, all complete as per direction of the Engineer-in-Charge.: Top inside diameter 35 cm, outer bottom diameter 25 cm, total height 35 cm with wall thickness of 25.4 mm Filling of the empty pots with mixture of good earth & manure in the ratio of 2:1 (2 parts of Good Earth & 1 part of Manure) and placing them on approprite place including carriage of earth, manure and pots up to 50 metre, as per direction of the Engineer-in-Charge. [Note: The cost of good earth, earthen pots & manure will be paid seperately]. ",,,,
15
5993
-
... More
Providing and fixing M.S. tree guard 50 cm square in plan, height 1.40 metre above ground level and 0.50 metre below ground level. The vertical members shall consist of 4 Nos of angle iron of size 25x25x5 mm & 1.9 m long, one at each corner and 8 Nos flat iron of size 25x5 mm & 1.4 long. The vertical members shall be welded to 4 Nos 25x6 mm M.S. flats placed horizontally around the vertical member of the cage. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered IOCL or any other approved name. The tree guard shall be fixed to the ground by making suitable holes and by embedding four corners leg in the ground, including refilling the earth, compaction etc. complete. The tree guard shall be painted with two coats of paint of approved brand and manufacture over a coat of primer, complete in all respect.,,,,
15
70898
-
... More
Edging with common burnt clay F.P.S (non modular) bricks of class designation 7.5, laid dry length wise including required excavation, refilling, consolidating with hand packing and spreading surplus earth neatly within any lead.,,,,
262
15736
-
... More
Providing and Fixing G.I. chain link fabric fencing made of G.I. wire of dia. 4 mm, in mesh size 50 mm x 50 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade including strengthening with 2 mm dia wire or nuts, bolts and washers and including 50 mm x 50 mm x 3 mm G.I. Pipes frame for Top, Bottom and Vertical Posts and 25 mm x 3 mm G.I. Strips for fixing the fencing all around including all necessary hardware, Enamel Painting etc. complete as per directions of Engineer-in-charge,,,,
112
410208
-
... More
Anti-termite treatment of lawn area using PREMISE 30.50% IP. One litre PREMISE diluted in 499 litres of water and applying solution @ 1.00 litre per sqm of lawn or bed area (two applications are required) including cost of chemical complete as per directions of the Engineer-in-Charge.,,,,
550
6399
-
... More
Providing & Fixing Visitor's Bench 3 seater with FRP with back rest seat and with back rest of size 1.50 x 0.60 m including C.I.supports and leg including fixing to level ground with necessary concrete hold fast etc with Benchman BMC 24B or equivalent,,,,
15
221958
-
... More
Providing, installing & fixing Sign Board with G.I./AL/M.S. Frame, 3mm ACP PVDF Cladding, and Acrylic 3D LED Glow Letters and 3D LED Logo on one side, mounted on exterior wall or exterior façade with suitable rating as directed with all works complete. Approx. dimensions: 6.0 m x 0.75 m. Final Size, lettering, colours etc. as directed by Engineer in Charge. Sqm area of Face in Front Elevation shall be measured.,,,,
9
325715
-
... More
Providing, installing & fixing Sign Board with G.I./AL/M.S. Frame, 3mm ACP PVDF Cladding, and Acrylic 3D LED Glow Letters and 3D LED Logo on both sides, mounted on exterior wall or exterior façade with suitable rating as directed with all works complete. Approx. dimensions: 1 m x 1 m for IOCL Logo & 160 mm ht. for Letters. Final Size, lettering, colours etc. as directed by Engineer in Charge. Sqm area of Face in Front Elevation for One Side only shall be measured. Rates should include for both sides work.,,,,
1
90919
-
... More
Supplying, Installing, Testing & Commissioning Outdoor Garden Swing of min. 3 Seater Capacity (min. weight bearing of 205 kg) with Frame made of GI pipes (conforming to IS 1239) & SS Chains (min. wire dia 6.3 mm) all metal parts duly coated by UV Resistant Powder Coating / Synthetic Enamel Paint and Epoxy Primer, FRP Roof of min. 2 mm thk., curved in shape and PU Painted, FRP Seat with integrated back rest of min. 3 mm thk., seat with arms on both sides, with legs fixing and grouting in ground as per site condition, colour of seat, frame, roof, design of swing roof etc. as directed by Engineer - in - Charge.,,,,
2
62422
-
... More
Supplying, Installing, Testing & Commissioning Outdoor Children Garden Swing of min. 2 Separate Seater Capacity (min. Weight Bearing of 136 kg) with Frame made of GI pipes (conforming to IS 1239) & SS / G.I. Chains (min. wire dia 4.7 mm) both duly coated by UV Resistant Powder Coating / Synthetic Enamel Paint and Epoxy Primer, FRP Seat of min. 4 mm thk., with legs fixing and grouting in ground as per site condition, colour of seat, frame, design of swing etc. as directed by Engineer - in - Charge. ,,,,
2
67850
-
... More
Supplying, Installing, Testing & Commissiong Outdoor Wave Slide of approx. 2.1 m height having FRP Wave pattern slide of approved colour, G.I. Anti Skid Platform, Steps with Safety Railing made of G.I. Pipes with all Metal parts duly coated by UV Resistant Powder Coating / Synthetic Enamel Paint and Epoxy Primer with all fitting, fixture complete and colours, design as directed by Enginner - in - Charge.,,,,
1
77349
-
... More
Supplying, Installing, Testing & Commissioning Two Wheel Shoulder Builder / Arm Wheel Outdoor Gym Equipment made of heavy duty G.I. Pipes duly coated with UV Resistant Powder Coating / Synthetic Enamel Paint over Epoxy Primer with 800 mm dia. Wheels with all installation, fixing, accessories etc. complete, colours, design as directed Engineer - in - Charge.,,,,
1
13440
-
... More
Supplying, Installing, Testing & Commissioning Outdoor Double / Two User Chest Press with 120 kg per user capacity made of heavy duty G.I. Pipes duly coated with UV Resistant Powder Coating / Synthetic E namel Paint over Epoxy Primer with Ergonomic Design & Seating, Limited Moving Scope while operation, Free from sharp edges with all installation, fixing complete with colours, design as directed by Engineer - in - Charge.,,,,
1
31730
-
... More
Supplying, Installing, Testing & Commissioning Counterbalanced Smith Machine with fucntional Trainer with min. 250 kg Plate Load Supports, self-lubricating bushings, lockable weight selector pins, frame and other components being Powder coated with all accessories, attachments complete as directed by Engineer - in - Charge.,,,,
1
66764
-
... More
Providing 4 feet high R.C.C SCLUPTURE BY EMINENT SCLUPTOR complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. complete, Sculpture design, aesthetics, colour etc. as directed and approved by Engineer - in - Charge.,,,,
3
192618
-
... More
Providing 7 feet high R.C.C STATUE BY EMINENT SCLUPTOR complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. complete, Sculpture design, aesthetics, colour etc. as directed and approved by Engineer - in - Charge.,,,,
3
321032
-
... More
Supplying, fitting, fixing and commissioning of Cascade Jet Fountain up to 13'-0" height complete with "PEM" CANADA make nozzles, pump, motor, starter panel, requisite electrical & plumbing work etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specification and directions of the Engineer-in-Charge.,,,,
1
85607
-
... More
Electrical works
-
-
-
... More
Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required : Group C
495
1108703
-
... More
Wiring for twin control light point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
131
315041
-
... More
Wiring for circuit / submains wiring along earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required : 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earth wire.
2775
1101607
-
... More
Wiring for circuit / submains wiring along earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required: 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire.
1555
696583
-
... More
Wiring for circuit / submains wiring along earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/recessed steel conduit as required : 4 x 6 sq.mm + 2 x 6 sq.mm earth wire.
944
1058903
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing suface/recessed steel/PVC conduit as require: 2 Pair
828.3
38206
-
... More
Supplying and drawing co-axial TV cable RG-6 garade, 0.7 mm solid copper conductor PE insulated shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/recessed stell/PVC conduit as required.
731.5
41734
-
... More
Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 20mm
622.5
96732
-
... More
Supply and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required: 25mm
1337.5
235443
-
... More
Supplying and fixing following modualr switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 A switch
666
83279
-
... More
2 way 5/6A switch
131
23536
-
... More
15/16A switch
190
35981
-
... More
3 pin 5/6 A socket outlet
572
84714
-
... More
6 pin 15/16 A socket outlet
100
23915
-
... More
Telephone socket outlet
55
9881
-
... More
TV antenna socket outlet
25
4491
-
... More
Bell push
15
2549
-
... More
Supplying and fixing following size/modules, G.I. box alongwith modular base & cover plate for modular switch in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mm x 75mm)
154
55711
-
... More
3 Module (100mm x 75mm)
252
100037
-
... More
4 Module (125mm x 75mm)
41
17072
-
... More
6 Module (200mm x 75mm)
38
18544
-
... More
8 Module (125mm x 125mm)
267
147158
-
... More
Supply and fixing following Modular base & cover plate on existing modular metal box etc. as required
-
-
-
... More
1 or 2 Module
37
5974
-
... More
3 Module
252
46194
-
... More
4 Module
41
7864
-
... More
6 Module
38
8395
-
... More
8 Module
267
68393
-
... More
Supply and fixing suitable size G.I.Box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required,
314
181828
-
... More
Supplying and fixing brass batten/angle holder including connection etc. as required.
150
23854
-
... More
Supplying, Installation, Testing, Commissiong of wall bracket / ceilling fitting of all size and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc, as required.
25
3611
-
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/call bell point (without independent switch etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required
-
-
-
... More
Group-C
78
81244
-
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415V, on surface/recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
4 way (4 + 12), Double door
20
99328
-
... More
Supplying and fixing 5A to 32A rating, 240/415V, 10kA, "C" curve miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
212
65884
-
... More
Supplying and fixing following rating, four pole 415V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
... More
40A
21
24728
-
... More
Supplying and fixing following rating, double pole (Single phase and neutral), 240V, residual current circuit breaker (RCCB), having a sensitivity current 30mA in the existing MCB DB complete with connection, testing and commissioning etc. as required.
-
-
-
... More
40A
53
169989
-
... More
Supply and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5% in convenient sections. Joined with connectors, suspended from the ceilling with G.I. suspenders including G.I. bolts & nuts, etc as required
-
-
-
... More
300mm width x 50mm depth x 1.6mm thickne
65
75988
-
... More
Supply and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5% in convenient sections. Joined with connectors, suspended from the ceilling with G.I. suspenders including G.I. bolts & nuts, etc as required
-
-
-
... More
300mm width x 50mm depth x 1.6mm thickne
5
11241
-
... More
"HEARTH ELECTRODES/ Supplying, installation, testing of GI earthing electrode, including the supply and installation of the CI cover, charcoal /special backfill etc. and construction of chamber; complete as per drawings ,specifications and directions of the Site Engineer, Including the cost of all labour, tools, materials etc. complete in all respects."
10
187653
-
... More
Providing and laying earthing connection from earth electrode with 4.0mm dia. Copper wire in 15 mm dia G.I. pipe from earth electrode including connection with copper thimble excavation and re-filling as required.
20
8858
-
... More
"EARTHING PLATE: Supply & Installation of G.I. earthing plate as per standard drawing outside the buildings. The item also includes grouting of the plate as shown in the drawing. The item should be complete in all respect including all materials, tools, tackels etc. and as per direction of EIC / Site engineer."
5
9254
-
... More
"EARTH STRIP / WIRE / ROPE / CABLE: Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthing grid system by supplying, laying the GI / Cu strip and making all the necessary welding joints, connecting to the earthing electrodes and existing earthing grid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer-in-charge, including the cost of all labour, tools, materials, etc. complete in all respect: "
-
-
-
... More
50 mm X 6 mm G.I. earthing strip
150
50822
-
... More
40 mm X 5 mm G.I. earthing strip
60
14224
-
... More
25mm x 4 mm copper flat
50
45995
-
... More
GI wire (8 SWG)
100
7599
-
... More
GI wire / rope 10 mm diameter
200
39888
-
... More
"Lighting Distribution Board / AC Distribution Board: Supply , installation, testing and commissioning of TPN lighting / AC Distribution board of approved make, with rating and feeders as per specification. The DB shall be of IP-42 protection class and shall conform to IS 8623. The board shall be fitted with an acrylic door as per specifications and drawings: "
-
-
-
... More
Type III Distribution Board: Double Door EURODB of Havells or equivalent approved make having bus bar 200 A TPN, 1 Incomer 125 A FP MCB Isolator with 125 A FP RCCB (Senstivity 100 mA) alongwith 3 numbers 63 A TPN MCB as per specification.
6
648521
-
... More
Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type (NP3), centrifugally cast conforming to I.S.458 with 1:3:6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jointing of pipes with stiff mixture of cement mortar in the proportion of 1:2 ( 1 cement: 2 fine sand), testing of joints, complete in all respects as per specifications, drawing and the direction of the EIC/Site Engineer:
-
-
-
... More
300 mm dia
36
113745
-
... More
Modular Cable Transit (MCT): Supply fixing and erection of modular cable transit (MCT) for cable entry to building in proper frame including supply of peelable type, spare block, stay plates compression wedgs etc. with all accessories as per specification considering 20 % minimum spare in each module to be installed as per instruction of Engineer in charge/ site engineer:
-
-
-
... More
Galvanised mild steel frame with packing space of Min.120x240 mm with multi diameter blocks and accessories with peeling off arrangement to adjust cable size from 3.5mm to 99mm outer dia.
4
97805
-
... More
Supply, installation and testing of Lightning arrestor on top of the buiding for diverting lightning surges to the ground. The work shall include supply of 2 Meter long copper lightning arrestor with 5 spronged phenyl rod base plate etc. complete with necessary insulators including supply and fixing of 50 x 6 mm GI earthing strip of required length and connection to the main earthing grid.
6
57232
-
... More
Supply of 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 230 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as per directions of Engineer in Charge
97
270894
-
... More
Supplying and fixing circular/ hexagonal M.S. Sheet ceiling fan box with clamp, 140 mm internal diameter, 73 mm height, 3 mm thick rim bottom, and top lid of 1.5 mm thick, M.S. sheet lids shall be screwed into the M.S. box by means of 3.0 mm diameter round headed screws, clamp shall be made of 12 mm diameter M.S. bar bent to shape as per standard drawings with over all length as 80 cm complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
97
22310
-
... More
Providing, Supplying & Laying 4 core 25 sqmm PVC Sheathed / XLPE ISI armoured cable multistrand Aluminium conductor for 1.1 KV on wall / trench / pipe as directed.
600
136212
-
... More
Providing, Supplying & Laying 4 core 4.0 sq.mm. PVC Sheathed / XLPE ISI armoured cable multistrand/solid copper conductor for 1.1 KV on wall / trench / pipe as directed.
275
119850
-
... More
Providing, Supplying & Laying 4 core 25 sq.mm. PVC Sheathed / XLPE ISI armoured cable multistrand/solid copper conductor for 1.1 KV on wall / trench / pipe as directed.
550
992191
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for 4c x 25 sq.mm. (28mm) PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
2
764
-
... More
Supplying and making end termination with brass compression gland and aluminium lugs for 4c x 4.0 sq.mm. PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
28
1121
-
... More
Supplying & Making Solder less crimping type Copper lugs conforming to IS, suitable for 4 core x 4 sq.mm. Copper PVC/XLPE Cables, evenly crimped with high pressure tool & connected to terminals with brass/cadmium plated nut bolts in an approved manner.
112
1087
-
... More
Supplying & Making Solder less crimping type Copper lugs conforming to IS, suitable for 4 core x 25 sq.mm. Copper PVC/XLPE Cables, evenly crimped with high pressure tool & connected to terminals with brass/cadmium plated nut bolts in an approved manner.
8
145
-
... More
Supplying, Installation, Testing & Commissioning of 20W LED Tube Lights with integral driver with LED of wattage 0.2 Watt to 0.5 Wat assembled on single MCPCB, with housing used as a heat sink, made of th ick steel sheet confirming to IS:513/CRCA / Aluminium Die Cast powder coated and hight U.V. & Corrosion resistance with diffuser with company mark /name 160 V to 270 V, Power Factor more than 0.95, THD15%, CCT 6500 K, Luminaire efficacy = 100 lumens/watt, LED driver efficiency 85%, Surge capacity - 2KV, IP-20, 4 feet, with suitable fittings / holders etc. all complete as directed.
123
45990
-
... More
Supplying, Installation, Testing & Commissioning of 9W/10W LED Lamps, CCT 6500 K, Luminaire Efficacy = 100 lumens/watt, Lamps of 220 to 240 voltage, min. 15,000 burning hours life, 500V in built-surge protection, polycarbonage diffuser, mounting suitable for E14/ E27 / B22 lamp holders, pf= 0.5, integral type LED lamps with suitable lamp holder.
190
45438
-
... More
Supplying, Installation, Testing & Commissioning of LED 9W Square / Circular shaped surface/recessed mount downlight with provision for spring loaded mounting clips IP 20 with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, with housing used as a heat sink, made of thick sheet steel confirming to IS:513/CRCA/ Aluminium pressure die cast powder coated and high U.V. & corrosion resistance with diffuser housed in Aluminium Casted body with company mark/name; 160 V to 270 V, Power Factor more than 0.95, THD 15%, CCT 6500 K, Luminaire efficacy = 100 lumens/watt, LED driver efficiency85%, Surge Capacity - 2KV with suitable fittings / holders, drivers etc. all complete as directed.
58
15983
-
... More
Supplying, Installation, Testing & Commissioning of Kitchen Chimney with Auto Clean function with Suction Capacity of =1000m3/hr of reputed brand and manufacturer as directed.
15
508875
-
... More
Supplying, Installation, Testing & Commissioning single phase approved make industrial exhaust fan suitable for medium duty ring mounted low noise operation suitable for medium duty having 305 mm dia 900 RPM speed, with suitable connection, holder etc. all complet as directed. - For Kitchen
16
39509
-
... More
Supplying, Installation, Testing & Commissioning single phase approved low noise decorative exhaust fan having square frame ABS Body with inbuilt louvers & square frame, fan having 250 mm dia. With 1350 RPM, with suitable connection, holder etc. all complet as directed. - For Toilet.
37
60773
-
... More
Supply, Installation, Testing & Commissioning of Approved Make RCCBs / ELCBs 40Amp. DP Cat. III conforming to IS: 12640, having sensitivity of 30mA, short circuit withstand capacity of 10KA, suitable for operation on single phase / three phase as required, having characteristic of quick action & tripping with all advance feature & do not incorporate any electronic component as directed. RCBO (30mA)
48
128953
-
... More
Supply, Installation, Testing and Commissioning of 7.5 HP or as directed 3 phase open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor with suitable pumping capacity and 40-50mtr head as approved and directed. (The rate shall inclued with Starter panel and Suitable cable size. Approx 50mtr. Cable length.)
2
154789
-
... More
Supply, Installation, Testing and Commissioning of 15 HP or as directed 3 phase open well horizontal mono block pump set with cast iron body, complete for three phase submersible motor with suitable pumping capacity and head as approved and directed. (The rate shall inclued with Starter panel and Suitable cable size. Approx 50mtr. Cable length.)
1
108311
-
... More
"Supply, Installation, Testing and Commissioning of min. 4.0mtr. Height Aluminium/ Aluminium Alloy / G.I. / M.S. Decorative pole with 30W LED Light fixture as per choice and direction of Engineer in Charge. (The rate shall include pole foundation and Pole box with DP, MCB, Connectors and Incoming and Outgoing cable pile etc. all complete)"
20
502208
-
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required
-
-
-
... More
Upto 35 Sq.mm
275
129199
-
... More
Above 35 Sq.mm and upto 95 Sq.mm
55
27041
-
... More
Supply of low voltage power control centre (PCC) as per attachment specification. (PCC-NB-VAD).
1
2507816
-
... More
Supply of low voltage power control centre (PCC) as per attachment specification. (PCC-OB-VAD).
1
2341401
-
... More
LT Panel - Erection, installation including transportation from owner desginated location, testing and commissioning of 415 V, owner supplied power-control- centres, motor control centres, soft starters, APFC panel etc. assembling as required, installation on the already made foundation channels, aligning, levelling, grouting, assembling, making all the inter connections /outgoing/incoming power & control cable/ bus duct connection including making holes for cable entries as required as per drawing, specifications and directions of the Site Engineer/Engineer-in-Charge including cost of all materials, tools labour etc. complete in all respect including termination of all power, control cables, installation of thermistor controller, internal wiring, earthing of LT panels, supply of cable glands etc.complete as per cable schedule, drawings etc.:
-
-
-
... More
Weight of unit above 500 kg but upto and including 1000 kg
4800
425706
-
... More
"Supply of 250 KVA,3 phase,415V silent D.G. set a per CPCB- IV or latest emission norms of with separate Lead-Acid battery for starting of DG set including acoustic enclosure,all safety devices, all control and power cables from AMF panel to DG set (Main Power supply cable from DG set to AMF panel shall be owner supplied) monitoring devices, level & pressure transmitters and all accessories complete as per specifications attached. Item also includes Supply of PLC based AMF Panel including auto power changeover facility with 400AMP or more rating power contactors (02 nos.) for 250 KVA DG set. PLC based AMF Panel logic including its hardware of complete switchgear and circuitry for AMF and automatic changeover logic including selector switch for local/remote operation.Interlocking of grid & DG supply with two nos. of incomer- MCCBs of 400A or more power rating and single 400A or more rating MCCB as outgoing to distribution bus. Both the Incomer of AMF panel should have facility of tripping in remote mode by SCADA using POTENTIAL FREE contactors etc complete as per specifications"
1
4185609
-
... More
Suppying, Installing, Testing & Commissioning Water Heat Pump with Storage Tank, Circulation Pump, Control Panel etc. all complete for 1500 Ltr System
2
1183846
-
... More
",,Silent LT DG set - Erection, Installation including transportation from owner desginated location, connecting, testing and commissioning of owner supplied Emergency LT DG set including execution of terminal connection of power/control cable. The work shall include grounding of alternator neutral, earthing, providing water pipe connection for Radiator water make-up complete with valve, solenoid valve etc. piping for fuel line, fabrication, welding, erection and painting of owner supplied support structure (including supply of shortfall support structure, if any) for exhaust piping, mounting on channels/AVM pads, installation of PLC based AMF panel, NIG panel, exhaust piping including insulation and cladding, fuel piping etc., materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge:LT DG set with PLC based AMF panel, fuel tank etc"
1
55730
-
... More
Suppyling, Installing, Testing & Commissioning Water Filter with min. 4 - stage purification process consisting of Inline Sediment, Inline Carbon, UV Chamber and Post Carbon with high purification capacity of min. 60 Ltr/hr with UV Fail Alarm and other required sensors to be installed with all required accessories, connections etc. all complete as directed by Engineer - in - Charge.
15
126024
-
... More
Supply, fixing and connection of Philips/approved equivalent make LED COB Down lighter, suitable for Recessed mounting made of presssure diecast alluminium housing with powder coating, with high efficiency reflector , operating voltage range of 150 to 265 Volts AC, P.F 0.9, Surge protection: 2KV, THD 10% with high power LED's having efficacy of 120 lumins/watt,CCT: 3000K - 5700K, minimum CRI70, .etc., complete including supply & fixing of lead in wire, nuts, bolts, screws etc. All complete with labour and materials as per directions of Engineer-in-Charge. 9/10W
30
61754
-
... More
Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded). GARDEN LIGHT FITTING
15
6244
-
... More
Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded). 15W, Outdoor LED Light Fitting, IP55, 230V AC15W, Outdoor LED Light Fitting, IP55, 230V AC
15
7820
-
... More
Supply, fixing in position, installation, connection, testing and commissioning of the following LED Light Fittings rated for 240V, 50Hz, 1-ph AC fo the make of Philips / Osram / Havells / Wipro / Bajaj / Eveready / SYSKA / Oreva / Crompton or equivalant Indian make). Item includes Installation & Connection of Lighting Fixture on Existing Poles/HMT/FLT, Metallic Structures, Walls, Buildings, Roofs, Sheds and other facilities upto a height of 30m, removal of the, Complete in All respect with Materials, Transportation, Labor, Tools etc.. 90W, LED Street Light Fighting weatherproof, 230V AC, 50Hz
15
37760
-
... More
Fixing of following light fittings attachments on MS hanger/supports/concrete wall structure /steel structure completed with lead in wires and other accessories all complete with labour and materials as per direction of the Engineer-in-Charge. (cost of light fittings/lamp control gears and other fittings shall be excluded).STREET LIGHT FITTING (UPTO 9 M HEIGHT), STREET LIGHT FITTING (UPTO 9 M HEIGHT)
15
12011
-
... More
LT Cable: 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overall sheathed, Stranded, FRLSH, C2, Smoke density40%
-
-
-
... More
Al, 3.5Cx400 mm², A2XFY
1400
2099014
-
... More
Cable Laying - Laying of all type of cables LT (PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling) in trenches, in cable racks, in trays, in protective pipes, poles, columns, in conduits, in panels and on structures etc.; including the supply and installation of all required materials such as fixing clamps, screws, cable straps, tags, etc. as required (other than the supply of the conduits, cables, pipes, cable racks, trays, poles, structures and panels) complete in all respect, including cost of all labour, tools, consumable materials, etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer-in-Charge:
1400
119819
-
... More
LT Cable joint (1.1 KV) - Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply of required materials such as cable jointing kit (of heat shrinkable sleeve type of Raychem/Mseal/3M) , materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge:Power cables LT : OD above 60 mm
2
29518
-
... More
Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres including shoring, strutting etc. (if necessary), backfilling the trench, job complete in all respects, including all labour and materials complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
200
159510
-
... More
"WBM ROAD / CONCRETE BREAKING:,,WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairing of the road/dyke to original condition and disposing off excess materials (within the work site) job complete in all respects including the cost of labour, tools, materials, load, lift hire charges of equipments, if any, complete as per drawings, specification and directions of Site Engineer / Engineer-in-Charge."
20
104517
-
... More
SAND FILLING:Supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, transport, load and lift charges, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge
50
49389
-
... More
CABLE MARKER:Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concrete grouting, backfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer-in-Charge.
20
56867
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements