Indian Oil Corporation Limited Tender
Search for the latest Gujarat tenders online related to civil works, road & transport, pipelines and more easily here on BidAssist. Here you can get any and every tender that is posted on the eProcurement Gujarat website, minus the clutter. No need for a tender ID, as on BidAssist, you can view any Gujarat tender by merely typing Gujarat in the search box.
Costs
EMD
₹ 10,78,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Balance Combined Station Works Of Mechanical Civil Electrical And Instrumentation Works And Other Facilities
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_PLHO_175218_1Bid Award Id
ViewTender No
PLCC/KGPL/M/24003Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Special_Instructions_to_the_Bidders_20230207_version_1a
BOQ Items
... More
Laying of HDPE Pipe in trenches/ walls/ concrete structure/ panels etc. as per specifications & drawings & blowing/ laying of Owner supplied Aurmoured/Unarmoured Optical Fibre Cable in HDPE pipe,jointing & splicing of OFC, carrying out end to end testing of laid Optical fibre cables by taking OTDR traces and submitting the OTDR trace printouts to Site Engineer/ Engineer-in-charge. The job includes the supply and installation of required materials such as fixing clamps, screws, tags etc. as required to complete the job in all respects as per drawings and directions of Site Engineer/ Engineer-in-charge including cost of all labour, tools & tackles, test instruments, materials etc. The job includes handing over the tested cables to the Telecom Works Contractor and providing necessary assistance/ support to the Telecom Works Contractor in commissioning of Local Area Network.
1000
237180
-
... More
Trenching for laying of HDPE in Independent trench Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.65 metres including shoring, strutting etc. (if necessary), backfilling the trench, as directed by Engineer-in-charge/ Site Engineer, including all labour and materials complete as per drawings and tender specifications
1650
410817
-
... More
Installation of OFC jointing kits as per drawings, specifications and directions of Engineer-in-charge/ Site Engineer
1
11204
-
... More
Installation of Transition Pits at building entry points as per tender specifications, drawings and directions of Engineer-in-charge/ Site Engineer
1
8491
-
... More
Installation of wall mounted Fibre Termination Box (FTB) as per tender specifications and directions of Engineer-in-charge/ Site Engineer
2
15771
-
... More
Installation of Wall mounted Cabinet (switching closet including network switch , UPS etc in wall mount cabinet) for housing Networking Equipment/ CCTV hardware, patch panel & accessories including power distribution boxes, MCBs/ Isolator Switches, required installation materials as per tender specifications
4
32652
-
... More
B INSTRUMENTATION
-
-
-
... More
As built documentation for each station covering a) Control /signalling cable layout drawings, b) Cable trench details, c) Cable m arker details, d) Earth grid layout, e) Field instrument termination details, f) Cable schedule, g) Junction box wiring details, h) Earth resistivity measurement data, i) Field panel termination details, j) Calibration data of all instruments tested as per scope. , k) OTDR Traces of the laid OFC as applicable for respective stations
1
132407
-
... More
C MECHANICAL
-
-
-
... More
Equipment installation
-
-
-
... More
"Above Ground Equipments Installation: Taking delivery and transportation of equipments from designated Centralized warehouse locati on within the state (Details of warehouse given in SCC), placing on pre-constructed foundations, assembling together all sub-assemb l ies, levelling, alignment, grouting, cleaning and flushing by water, draining, checking, testing, dressing and making good of the foundation and completing the work in all respects in accordance with the relevant drawings, manufacturer's insta llation instructio n, specifications and instructions of Site Engineer / EIC. Note: Weight of equipment is indicative only, Payment shall be done based on actual weight of equipment "
-
-
-
... More
Booster Pumping Unit Installation
36
1555669
-
... More
Single Basket Type Strainer - 12" x 300#
2
61229
-
... More
"Insulating Coupling Erection: Taking delivery and transportation of equipments from designated Centralized warehouse location withi n the state (Details of warehouse given in SCC) and installation of Insulating Couplings of the following sizes and pressure class, at elevations specified in the drawing, checking resistance value by meggar test before and afte r erection levelling, aligning and checking, making welded connections to the piping, coating & wrapping and completing the work in all respects in accordance with the relevant drawings, manufacturer's installation instructions, specifications and instructions of Site Engineer / EIC. "
-
-
-
... More
16" 300# Insulating Coupling
1
18412
-
... More
"Above Ground Equipments Installation: Taking delivery of equipments, shifting/transporting within station premises, placing on pre -constructed foundations, assembling to gether all sub-assemblies, levelling, alignment, grouting, cleaning and flushing by water, d raining, checking, testing, dressing and making good of the foundation and completing the work in all respects in accordance with the relevant drawings, manufacturer's ins tallation instruction, specifications and instructions of Site Engineer / EIC. Note: Weigh t of equipment is indicative only, Payment shall be done based on actual weight of equipment "
-
-
-
... More
Y - Type Strainer - 12" x12"- 300#
3
78935
-
... More
"Above ground process piping: Taking delivery & transporting of pipes from designated stock pile location /Designated godown both fr om outside & inside station pr emises. Taking delivery of pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners fr om designated location within s tation premises, transporting the same to site, fabrication and erection of above ground piping incl uding cutting, edge preparation, bending, threading, lining up, welding and installing pipes and pipe fittings, flanges, elbows, eq ual and reducing outlet tees,conc entric/eccentric reducers, y-type strainers, drain funnels, vent pipes and tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevations connecting with equipme nt nozzles, valves, vessels, in li ne instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water after cleaning by compress ed air, hydrostatic testing of each section to the specified pressure, draining the water, tie-i n, final cleaning-up and dispoal of wastes and surpluses including providing all inputs such as labour, material, equipments and con sumables necessary to perform the wo rk (other than those specifically under taken by the owner in this contract) and completing the work in all respects in accordance w ith the drawings, specifications and instructions of Site Engineer / EIC. Thickness and Grade mentioned in the item are for referenc e only and may vary. Payment shall be based on OD "
-
-
-
... More
24"OD x 0.375"WT API 5L X60
35
326735
-
... More
20"x 0.500" API 5L X70
10
77793
-
... More
16" OD x 0.375"/0.438"WT APL 5L
220
1369169
-
... More
12.75" OD x 0.375" WT APL 5L
250
1054315
-
... More
6.625" OD x 0.280" ASTM A 106 Pipe/A333
10
34462
-
... More
4.5" OD x 0.237"WT ASTM A 106 Gr B/A333
20
50095
-
... More
3.5" OD x 0.216"WT ASTM A 106 Gr B /A333
50
84261
-
... More
2.375" OD x 0.218"WT ASTM A 106 Gr B /A333
60
67000
-
... More
1.315" OD x 0.179"WT ASTM A 106 Gr B /A333
40
30781
-
... More
"Above ground internal epoxy coated pipe for Fire Water Services: (with internal epoxy coating for repair at welding joints ) Taking delivery of internal epoxy coated pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated l ocation within station premises / Centralized warehouse (as appl icable), transporting the same to site, fabrication and erection of above ground piping including cutting, edge preparation, bending , threading, lining up, welding and installing pipes and pipe fitt ings, flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, y-type strainers, drain funnels, vent pipes an d tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all elevation s connecting w ith equipment nozzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flush ing pipes by water after cleaning by compressed air, hydrostatic testing of each section to the specified pressure, draining the wat er, tie-in, final cleaning-up and disposal of wastes and surpluses including providing all inputs such as labour, m aterial, equipments and consumables necessary to perform the work (other than those specifically under t aken by the owner in this c ontract).The scope shall also include cleaning of internal surface of pipes conforming to SSPCSP-10 at al l location where coating h as been destroyed due to welding and repairing the internal surface by application of 2-pack cold cured Is ophthalic polyster acryli c co-polymer glass flake filled /Liquid epoxy / Equivalent with coating of thickness 700-1000 Microns . The locations where internal coating repair is expected would be at pipe end , Flanges ,pipe fittings ,valve location so that the internal of pipe surface is no t directly exposed to water and completing the wo rk in all respects in accordance with the drawings, specifications and instruction s of Site Engineer / EIC. "
-
-
-
... More
18" ODx 0.375"/0.25IN WT IS3589 FE410 Pipe
350
1837726
-
... More
4.5" ODx 0.237" WT ASTM A 106 Gr B Pipe FW
50
77336
-
... More
"Under ground piping for Process piping (with PU/3LPE Coating): Taking delivery of bare Pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location with in station premises transporting the same to site, fabrication and erection of underground piping including cutting, edge preparatio n, bending, threading, lining up and welding, excavating, trenchin g in all kind of soil to specific depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outlet tees, concentric/eccentric reduc ers, drain funnels, vent pipe and tapping for instrument such as pessure gauges, thermal relief valves, thermowells etc., undergroun d at elevations indicated in the drawing connecting with equipme nt nozzles, valves, vessels, in-line instruments etc.,Cleaning expos ed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges ,equipment and valves etc. by sand blasting or with power wire brush (wherever sand blast cleaning is not possible) free of dust, gr ease, mill scales etc. and applying single layer polyurethane coatin g(PU) using 100% solvent free elastomeric plyurethane/ liquid epoxy, with approved materials,Equipment etc, holiday detection of the coating, cleaning of coated pipes by water flushing after cl eaning by compresed air,hydrostatic testing of each section to the spec ified pressure, draining the water, tie-in, back filling, re storation of site final cleaning up and disposal of water and surpluses, providing all inputs such as labour, materials equipment a nd consumable necessary to perform the work (other than those specificall y undertaken to be supplied by the owner under the contra ct) and completing the work in all respects in accordance with the drawing s, specifications and instructions of the Site Engineer / EIC. In case of 3LPE coated pipes, weld joints shall be PU coated.Thicknes s and Grade mentioned in the item are for reference only and may vary. Payment shall be based on OD Note:- Charges for applying single layer polyurethane coating(PU) using 100% solvent fre e elastomeric plyurethane/ liquid epoxy for exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges,equipment and valv es etc shall be paid under separate SOR Item. "
-
-
-
... More
24"OD x 0.375"WT API 5L X60 APL 5L -U/G
13
141180
-
... More
16" OD x 0.375"/0.438"WT APL 5L -U/G
30
217201
-
... More
12.75" OD x 0.375" WT APL 5L -U/G
50
273910
-
... More
10.75"OD x 0.365" API 5L - U/G
10
51058
-
... More
6.625" OD x 0.280" ASTM A 106 Gr B/A333 Pipe -U/G
10
37594
-
... More
4.5" OD x 0.237"WT ASTM A 106 Gr B/A333 -U/G
10
22181
-
... More
3.5" OD x 0.216"WT ASTM A 106 Gr B/A333 -U/G
20
37881
-
... More
2.375" OD x 0.218"WT ASTM A 106 Gr B/A333 -U/G
20
27222
-
... More
1.315" OD x 0.179"WT ASTM A 106 Gr B/A333 -U/G
10
12221
-
... More
"Under ground piping for Fire Water Services:(with internal epoxy coating for repair at welding joints, flanges and fittings) Taking delivery of bare Pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within sta tion premises / Centralized warehouse (as applicable) transporting the same to site, fabrication and erection of underground piping including cutting, edge preparation, bending, threading, lining up and welding, excavating, trenching in all kind of soil to specifi c depths as indicated in drawings and installing pipes and all types of pipe fittings like flanges, elbows, equal and reducing outle t tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping for instrument such as pressure gauges, thermal relief v alves, thermowells etc., underground at elevations indicated in the drawing connecting with equipment nozzles, valves, vessels, in-l ine instruments etc., cleaning of coated pipes by water flushing after cleaning by compressed air hydrostatic testing of each sectio n to the specified pressure, draining the water, tie-in, back filling, restoration of site final cleaning up and disposal of water a nd surpluses, providing all inputs such as labour, materials equipment and consumable necessary to perform the work (other than thos e specifically undertaken to be supplied by the owner under the contract) .The scope shall also include cleaning of internal surface of pipes conforming to SSPC SP-10 of Flanges, fiitings and at all location where coating has been destroyed due to welding and repa iring the internal surface by application of 2-pack cold cured Isophthalic polyster acrylic co-polymer glass flake filled /Liquid ep oxy / Equivalent with coating of thickness as per specifications. The locations where internal coating repair is expected would be a t pipe end, Flanges, pipe fittings ,valve location so that the internal of pipe surface is not directly exposed to water and complet ing the work in all respects in accordance with the drawings, specifications and instructions of Site Engineer / EIC. Note:- 1) Char ges for applying polyurethane coating(PU) for exposed steel surfaces of Bare Pipes, Pipe Joints, Fittings, Flanges, equipment and va lves etc shall be paid under separate SOR Item. 2) Charges for supply of pipe with internal coating shall be paid under separate SOR items. "
-
-
-
... More
18" ODx 0.375" WT IS3589 FE410 Pipe -U/G
50
393763
-
... More
"Above ground piping for Fuel line / Air line: Taking delivery of pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within station premises / Centralized warehouse (as applicable), transporting the same to site , fabrication and erection of above ground piping including cutting, edge preparation, bending, threading, lining up, welding and in stalling pipes and pipe fittings, flanges, elbows, equal and reducing outlet tees, concentric reducers, drain funnels, vent pipes an d tapping for instruments such as pressure gauges, thermal relief valves, thermowells etc., installing above ground at all el evatio ns connecting with equipment nozzles, valves, vessels, in line instruments etc., welded and threaded pipe line of different pressure ratings, flushing pipes by water after cleaning by compressed air including air cleaning prior to installation of valve by card boa rd/ Tin blasting method, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, final cleaning-u p and disposal of wastes and surpluses including providing all inputs such as labour, material, equipments and consumables necessary to perform the work (other than those specifically under taken by the owner in this contract).completing the work in all respects i n accordance with the drawings, specifications and instructions of Site Engineer / EIC. "
-
-
-
... More
3.5" ODx 0.216" WT ASTM A 106 Gr B Pipe F/A
50
98269
-
... More
2.375" ODx 0.218" WT ASTM A 106 Gr B Pipe F/A
50
65940
-
... More
1.315" ODx 0.179" WT ASTM A 106 Gr B Pipe F/A
50
38662
-
... More
"Under ground piping for Fuel / Air piping: Taking delivery of pipes, pipe fittings, steel flanges, spiral wound metallic gaskets & fasteners from designated location within station premises / Centralized warehouse (as applicable) transporting the same to site, fa brication and erection of underground piping including cutting, edge preparation, bending, threading, lining up and welding, excavat ing, trenching in all kind of soil to specific depths as indicated in drawings and installing pipes and all types of pipe fittings l ike flanges, elbows, equal and reducing outlet tees, concentric/eccentric reducers, drain funnels, vent pipe and tapping for instrum ent such as pessure gauges, thermal relief valves, thermowells etc., underground at elevations indicated in the drawing connecting w ith equipment nozzles, valves, vessels, in-line instruments etc., cleaning the material surface by sandblast cleaning, coating and w rapping the pipes/pipe fittings with coaltar base tape coating material (including the supply of coating tape, precoat material etc. ), holiday detection of the coating, cleaning of coated pipes by water flushing after cleaning by compresed air prior to installatio n of valve, cleaning by card board/ Tin blasting method, hydrostatic testing of each section to the specified pressure, draining the water, tie-in, back filling, restoration of site final cleaning up and disposal of water and surpluses, providing all inputs such a s labour, materials equipment and consumable necessary to perform the work (other than those specifically undertaken to be supplied by the owner under the contract) and completing the work in all respects in accordance with the drawings, specifications and instruc tions of the Site Engineer / EIC. "
-
-
-
... More
3.5" ODx 0.237"WT ASTM A 106 Gr B F/A/ U/G
10
40509
-
... More
2.375" ODx 0.237"WT ASTM A 106 Gr B F/A/ U/G
10
22822
-
... More
1.315" ODx 0.237"WT ASTM A 106 Gr B F/A/ U/G
20
43742
-
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated Centralized warehouse location within the st ate (Details of warehouse given in SCC), transporting the same to site, erecting above ground on preconstructed foundations or nde r ground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicab le) including all inputs, labour, material and c onsumable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accorda nce with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC. "
-
-
-
... More
20" x ANSI 600# MOV F/F API 6D Ball Valve
2
59660
-
... More
12" x ANSI 600# MOV F/F API 6D Ball Valve
1
17898
-
... More
4" x ANSI 600# HOV F/F API 6D Ball Valve
1
6060
-
... More
16" x ANSI 300# MOV F/F API 6D Ball Valve
2
42957
-
... More
16" x ANSI 300# ROV F/F API 6D Ball Valve
1
21478
-
... More
12" x ANSI 300# MOV F/F API 6D Ball Valve
17
273856
-
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated location within station premises / Centraliz ed warehouse (as applicable), transporting the same to site, erecting above ground on preconstructed fou ndations or underground inc luding earth work in excavation and filling for under ground valves at elevations specified in the drawin gs, priming and painting o f above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (o ther than those specifically undertaken to be supplied by the owner) and completing the work in all respec ts in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC. "
-
-
-
... More
2" x ANSI 600# HOV F/F API 6D Ball Valve
2
5010
-
... More
2" x ANSI 300# HOV F/F API 6D Ball Valve
12
40593
-
... More
1" x ANSI 800# HOV W/WISO 15761 BALL VALVE
38
35872
-
... More
3" x ANSI 300# HOV F/F API 6D Ball Valve
1
4105
-
... More
"Installation of Valves:( Process Piping): Taking delivery of valves of all types and pressure rating from the designated location w ithin station premises / Centralized wareho use located within the state (Details of warehouse given in SCC), transporting the same to site, erecting above ground on preconstru cted foundations or underground including earth work in excavation and filling for unde r ground valves at elevations specified in th e drawings, priming and painting of above ground valves, PU Painting of under ground p ortions (if applicable) including all inputs, labour, material and consumable (other than those specifically undertaken to be suppli ed by the owner) and completing the work in al l respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC. - Swing Check Valves"
-
-
-
... More
20" x 600# API 6D SWING CHECK VALVE
1
31644
-
... More
16"x ANSI 300# F/F API 6D Swing Check Valve
1
40149
-
... More
12"x ANSI 300# F/F API 6D Swing Check Valve
3
90335
-
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated location within station premises / Centrali zed warehouse (as applicable), transporting the same to site, erecting above ground on preconstructed foundations or underground inc luding earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and painting of above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (ot her than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the d rawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC. – For air line "
-
-
-
... More
3"x ANSI 300 # HOV F/F API 600 Gate / BS 5351 Ball Valve (For Fuel / Air Piping)
5
11948
-
... More
2"x ANSI 300 # HOV F/F API 600 Gate / BS 5351 Ball Valve (For Fuel / Air Piping)
5
10139
-
... More
1"x ANSI 300 # HOV F/F API 600 Gate / BS 5351 Ball Valve (For Fuel / Air Piping)
5
8264
-
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated location within station premises / Centraliz ed warehouse (as applicable), transporting the same to site, erecting above ground on preconstructed fou ndations or underground inc luding earth work in excavation and filling for under ground valves at elevations specified in the drawin gs, priming and painting o f above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (o ther than those specifically undertaken to be supplied by the owner) and completing the work in all respec ts in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC.- Globe valve "
-
-
-
... More
12" ANSI 600 # F/F BS-1873 GLOBE Valve
1
3746
-
... More
4"x ANSI 600# F/F BS-1873/BS EN ISO 15761 GLOBE Valve
1
6063
-
... More
2"x ANSI 600# F/F BS-1873 GLOBE Valve
1
3208
-
... More
2"x ANSI 300# F/F BS-1873/BS EN ISO 15761 GLOBE Valve
7
17737
-
... More
1"x ANSI 800# W/W BS-1873/BS EN ISO 15761 GLOBE Valve
18
28944
-
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated location within station premises / Centraliz ed warehouse (as applicable), transporting the same to site, erecting above ground on preconstructed fou ndations or underground inc luding earth work in excavation and filling for under ground valves at elevations specified in the drawin gs, priming and painting o f above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and consumable (o ther than those specifically undertaken to be supplied by the owner) and completing the work in all respec ts in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC.- Thermal Relief Valves "
-
-
-
... More
1" x 1" Thermal Relief Valve F/F ANSI 600# x 300
4
9104
-
... More
1" x 1" Thermal Relief Valve F/F ANSI 300# x 300
15
31208
-
... More
"Installation of Valves(for Fire water Lines-Tanks & Piping) : Taking delivery of valves of all types and pressure rating from thede signated location within station premises / Centralized warehouse (as applicable), transporting the same tosite, erecting above grou nd on preconstructed foundations or undergroundincluding earth work in excavation and filling for under ground valvesat elevations s pecified in the drawings, priming and painting of aboveground valves, flood coating and wrapping of under ground portions (ifapplica ble) including all inputs, labour, material and consumable (otherthan those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings,manufacturer's installation instructions and specifications andi nstructions of the Site Engineer /EIC. Note:The cost of construction of Valve foundations shall be measured &paid separately under r espective civil items. - Gate valves "
-
-
-
... More
18"x ANSI 150 # HOV F/F API 600 Gate Valve FW
12
254321
-
... More
4"x ANSI 150 # HOV F/F API 600 Gate Valve FW
10
51234
-
... More
High Volume Long Range Foam Monitor 750 GPM capacity stand post type with inlet flange of 4" X 150# HVLR
5
22868
-
... More
Stand Post Type double way fire hydrant fitted with 2 Nos of single landing valve complete as per IS: 5290 alongwith 4" x 150# WNRF Flange
12
62277
-
... More
"Radiographic Inspection: Inspection of welding by radiographic method on all types of piping including processing of films and inte rpreting the results of we ld quality and reporting the same to the Site Engineer together with recommendations as to the acceptabil ity or otherwise of the wel ds, submitting the finished radiographic films as may be approved or directed by Engineer-in-Charge incl usive of supply of all peson nel, labour, materials, equipment, consumable, inputs, etc. and providing all services complete in all respects as envisaged in the contract documents. Note: i) Payment will be on the basis of number of welds of the respective size ra diographed and shall be all inclusive for the complete job of radiographic inspection as envisaged in the contract document. ii) Ra diography not involving full girth weld will be paid at 50% of the rate for full girth weld for the respective size. iii) For set-o n type branch welding, the rate for radiography will be as applicable to the branch pipe size. iv) Repeat radiography of individual welds due to defective films or repair of welds shall be done at contractor's cost. In case where radiography is not possible: v) V erification by utrasonic testing shall be done at contractors cost. vi) Magenetic particle inspection as and where required shall be done at Contractors cost. "
-
-
-
... More
24" NB Pipe Joints RT
6
31448
-
... More
20" NB Pipe Joints RT
6
24153
-
... More
16" NB Pipe Joints RT
30
96615
-
... More
12" NB Pipe Joints RT
10
28172
-
... More
10" NB Pipe Joints RT
6
12790
-
... More
8" NB Pipe Joints RT
6
10527
-
... More
6" NB Pipe Joints RT
6
7647
-
... More
4" NB Pipe Joints RT
40
48262
-
... More
3" NB Pipe Joints RT
40
32008
-
... More
2" NB Pipe Joints RT
150
102198
-
... More
1" NB Pipe Joints RT
150
75131
-
... More
"Fabrication of Mitre Bends - Long Radius: Taking delivery of pipes from designated locations, transporting the same to site and fab rication of carbon steel piping specials by cutting, edge preparation, welding, all types of testing including radiography & includ ing supply of all inputs such as labour, mat erials (other than those specifically undertaken to be supplied by the Owner under the contract), equipments, consumables etc. neces sary to perform and completing the work in all respects in accordance with drawings, s pecifications and instructions of the Site Eng ineer / EIC "
-
-
-
... More
18" OD x 0.375" WT more than 45 ° & up to 90 ° Mitre Bend
2
64621
-
... More
"Dismantling of Structures: Dismantling by opening joints or by gas cutting/ cold cutting (wherever required as per site condition) of existing steel structural such as support for pipes, pipe fittings, valves, plate forms, walkways, stairways etc. including excav ation work wherever required handling, loading into truck for purpose of weighing, shifting to the designated location within the s tation premises and handing over, completing the work in all respect as per drawings, instructio n of the Site Engineer / EIC. "
1
15020
-
... More
"Dismantling of Piping (Aboveground): Dismantling of existing over ground piping works of all types and sizes by opening flange join ts or by gas cutting/ cold cutting or any other approved suitable means without damaging other portions of work. The job includes cu tting the pipes to required sizes as directed, taking out valves, flanges, tees, bends, gaskets nuts, bolts etc. attached supports a longwith any instruments such as pressure gauge, temperature gauge etc. handling, transporting and storing at owner's designated sto re in safe manner to avoid damage including supply of all labour, materials, equipments, consumables etc. necessary to perform and c omplete the work in all respects as per drawings, instructions of the Site Engineer / EIC (payment shall be made on linear measureme nt of dismantled piping including bends tees etc.). Note : The contractor shall indicate the piping system to be dismantled and shal l take specific approval from the Site engineer before dismantling of pipe. Certain redundant pipes which in the opinion of the Owne r need not be retrieived, those items shall not be dismantelled. "
1
19984
-
... More
" Dismantling of Piping Underground: Dismantling the existing under ground piping, locating, retrieving including excavating the pro pe r trenches by cutting the pipes without damaging other portions of work. The job includes cutting the pipes to required sizes as di rected, taking out valves, flanges, tees, bends, gaskets, nuts, bolts etc., handling, transporting and storing at owner's designa ted store in safe manner to avoid damage including supply of all labour, materials, equipment consumables etc. necessary to perform and complete the work in all respects as per drawing, instructions of the Site Engineer / EIC. (Payment shall be made on the linear mea surement of dismantled piping including bend, tees, reducers etc.). Note : The contractor shall indicate the piping system to be dismantled and shall take specific approval from the Site engineer befo re dismantling of pipe. Certain redundant pipes which in th e opinion of the Owner need not be retrieved, those items shall not be dismantled. "
1
27938
-
... More
"Development of As Built Drawings , Data Sheets etc: Development of as built drawings, data sheets, system details covering all addi t ional facilities incorporated under this project in the station and furnishing them as reference document. Additionally, electroni c copy of the documents shall also be furnished in compact disks- For all stations, T-Point, IPIG and SV stations"
1
267913
-
... More
"FW Network Analysis: Model Building and Flow Analysis by using Pipenet/Sprink/Flowmaster Software, suggesting the requirement of or i fice plate for flow and pressure control, preparation of reports, schematic drawings, recommendations and suggesting the pipe size s in the fire water network so that the fire fighting system meets the requirement of OISD 117, latest Edition. Completing the work in all respect as per the defined scope of work and instructions of Site Engineer/EIC."
1
260469
-
... More
Flexibility and piping stress analysis as per specification
1
133582
-
... More
"Temporary Barricading: Providing Temporary Barricading made of GI/ steel sheet with angle iron frame (40x40x6) in panels of 1.5 to 2 .0m including lateral/ vertical angle bracing/ steel beam at bottom for stability, earth filling up to 300mm height above"
500
1157473
-
... More
"Hook-up of New Piping with existing process Piping : Isolating the section by closing the valve and providing positive isolation w ith the help of suitable plates / spectacle blind, Dra ing of the section, water flushing,Cutting of portion of existing piping of r equired length by Cold cutting machine (to be arraged b y contractor)/ Opening of WNRF/SORF/Blind Flange trimming, grinding, beveli ng the edges, adding spool piece of required length/ Tee of the corresponding pipe size, thickness, adjoining and welding both the pipe ends ,or welding WNRF to pipe and bolting it with s pool pipe mating flange including supply of all inputs such as labour, mat erials, equipment, consumables etc. necessary to perform a nd complete the work in all respect as per specification and instruction of the Site Engineer / EIC. NOTE: i) This is a high precision work which is to be executing in minimum time so reduce operation down time period taking all safety prec autions. Before start of work firm planning to be done in consultaion with EIC/ Site Engineer and contractor should mobile all requi red resources before start of work. ii) The job also include evacuation of product from the pipi ng section after isolating the section and flushing with water and its d isposal. iii) Prior to start of work Party to prepare the complete scheme of hook up job and submit it to EIC/Site Engineer for approval and should carry out the job as per approved procedu re."
-
-
-
... More
16" OD x 0.375" WT piping
1
16759
-
... More
"Valves: Taking delivery of valves of all types and pressure rating from the designated Centralized warehouse location within the st ate (Details of warehouse given in SCC), transporting the same to site, erecting above ground on preconstructed foundations or under ground including earth work in excavation and filling for under ground valves at elevations specified in the drawings, priming and p ainting of above ground valves, PU Painting of under ground portions (if applicable) including all inputs, labour, material and cons umable (other than those specifically undertaken to be supplied by the owner) and completing the work in all respects in accordance with the drawings, manufacturer's installation instructions and specifications and instructions of the Site Engineer / EIC- Control Valves"
-
-
-
... More
12" 300# Control Valve F/F
1
28064
-
... More
D ELECTRICAL
-
-
-
... More
CABLE TRENCH Excavation in unpaved areas of earth in work sites for conventional cable trenches for a depth upto 1.5 metres incl uding shoring, strutting etc. -if necessary-, backfilling the trench, job complete in all respects, including all labour and m aterials complete as per drawings, specification and directions of Site Engineer / Engineer in Charge
1100
786172
-
... More
WBM ROAD / CONCRETE BREAKING WBM Road/concrete breaking for cable trenches including required shoring strutting etc., and repairin g of the road/dyke to original condition and disposing off excess materials -within the work site- job complete in all resp e cts including the cost of labour, tools, materials, load, lift hire charges of equipments, if any, complete as per drawings, sp ecification and directions of Site Engineer / Engineer in Charge
65
298778
-
... More
Cable Laying Laying of all type of cables LT -PVC / XLPE / Armoured/Unarmoured/Power/ Control/ Signalling- in trenches, in cable racks, in tra ys, in protective pipes, poles,columns, in conduits, in panels and on structures etc.;including the supply and install ation of all r equired materials such as fixing clamps ,screws, cable straps, tags etc. as required -other than the supply of t he conduits, ca bles, pipes, cable racks, trays, poles, structures and panels- complete in all respect, including cost of all l abour, tools, co nsumable materials etc. and cutting the cables in required lengths as per drawings, specification and directions of Site Engineer / Engineer in Charge
-
-
-
... More
Power cables LT OD upto 20 mm
7000
258125
-
... More
Power cables LT OD above 20 mm and upto 40 mm
1000
53595
-
... More
Power cables LT OD above 40 mm and upto 60 mm
4500
390285
-
... More
Power cables HT
200
25938
-
... More
Control cables -T&I- OD upto 20 mm
6250
518831
-
... More
Control cables -T&I- OD above 20 mm and upto 30 mm
6500
615134
-
... More
Installation, laying of 2 Pair PVC insulated copper conductor un armoured telephone cables in 16 mm/ 25 mm/ 32 mm PVC conduits from IDF through ceiling/ wall/trench and post laying end to end testing of telephone cables. The job includes supply, installation, fix ing of wall mounted telephone socket outlet with 2 port telephone jack face plate -white/ cream colour- including RJ11 I/O with mod u lar plate & switch box/ gang box for fixing the face plate & accessories, supply and installation of PVC Conduits, all required ma te rials such as fixing clamps, screws, cable straps, tags etc. as required complete in all respects as per specifications & scope of work, drawings and directions of Site Engineer/ Engineer in charge including cost of all labour, tools & tackles, materials etc.
2000
347061
-
... More
Installation, laying of Cat 6 LAN Cables in 16 mm/ 25 mm/ 32 mm PVC conduits from network switch through ceiling/wall/trench and pos t laying end to end testing of cables. The job includes installation & fixing of Duplex -2 port- Face plate -Network I/O point- -wh i te/ cream colour- for Local Area Network including RJ45 I/O, modular plate & switch box/ gang box for fixing the face plate & acce ss ories, supply and installation of PVC Conduits, all required materials such as fixing clamps, screws, cable straps, tags etc. as req uired complete in all respects as per specifications & scope of work, drawings and directions of Site Engineer/ Engineer in char ge i ncluding cost of all labour, tools & tackles, materials etc.
2000
245015
-
... More
Connection and testing of 415 V AC 3 phase / 230 V AC single phase motors -including space heaters/thermistors wherever provided- / AC/DC Actuators including execution of terminal connection of control and power cables, earthing of the motor/actuator/ connecting t he thermistor, installing the controller in LT panel, earthing the motor frame, armour etc. as per the drawings, erection manuals, a nd as per directions of Site Engineer. Job complete in all respects including the cost of supplying and installation of all the re qu ired FLP/WP cable glands, reducers, adapeters, end lugs, GI earthing wire / strips, labour, tools, materials, etc., as required i n a ll respects for all types of motors/heaters/thermistors/actuators etc.
-
-
-
... More
Capacity above 1 KW and upto 2.5 KW
25
94618
-
... More
Capacity above 50 KW
3
46796
-
... More
LT Panel Erection, installation including within site transportation, testing and commissioning of 415 V, owner supplied power con trol cent res, motor control centres, soft starters,static voltage regulators, APFC panel etc. assembling as required, installation on the alr eady made foundation channels, aligning, levelling, grouting, assembling, making all the inter connections /outgoing/inc oming power & control cable/ bus duct connection including making holes for cable entries as required as per drawing, specifications and directi ons of the Site Engineer/Engineer in Charge including cost of all materials, tools labour etc. complete in all respect including ter mination of all power, control cables, installation of thermistor controller, internal wiring, earthing of LT panels, supply of cabl e glands etc.complete as per cable schedule, drawings etc.
-
-
-
... More
Weight of unit above 1000 kg but upto and including 3000 kg
7000
841776
-
... More
Transformer Installation, testing and commissioning of owner supplied -outdoor type ONAN cooled- transformer, casting of foundati on block, & erection of transformer over the rail and foundation channels, including transporting , unpacking, rigging,aligning, lev elling, grouting, assembling, fitting and fixing all accessories/instruments/ relays etc. supplied separately if any,etc., making a ll the interconnections & termination of all power -HT / LT- cables, control cables / busbar etc. as per drawings, including earthin g/grounding of transformer neutral as per drawing, equipments needed to completely install and commission the transformer Job compl ete in all respect including cost of all labour, tools and materials and all services rendered complete, as per the drawings and dir ections of the Site Engineer / engineer in Charge.
1
93970
-
... More
HT switchboard -6.6/11 kV- Erection, Installation including transportation from owner designated location, testing and commission ing of HT Switch Board consisting of VCBs and other accessories including termination of all LT/control cables, installation on foun dation channels, drilling, cutting, welding, aligning, levelling, grouting, assembling and fitting all accessories / instruments / r elays, relay coordination, CT, PT, Numerical Relay with basic features like O/C, E/F and additional protections etc., connection of 230 V Supply / battery bank 110 V DC supply, earthing of HT Switchboard, making all the interconnections/ outgoing/incoming LT power & control cable connections including making holes for cable entries as required with materials i.e. WP Cable glands, end lugs, lab our, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer in Charge Not e Commissioning assistance -Only Supervision- shall be provided by the supplier of the HT Switch Board
1
19704
-
... More
FLP & WP Distribution Board Erection, installation including within site transportation, testing and commissioning of 415 V , Flame proof distribution boards -FLP DB- under scope of supply of bidder, assembling as required, installation on the already made founda t ion channels, aligning, levelling, grouting, assembling, making all the inter connections /outgoing/incoming power & control cable / bus duct connection including making holes for cable entries as required as per drawing, specifications and directions of the Site E ngineer/Engineer in Charge including cost of all materials, tools labour etc. complete in all respect including termination of al l p ower , control cables, installation of thermistor controller, internal wiring, earthing of FLP DB panels, supply of cable glands etc .complete as per cable schedule, drawings etc.
400
29854
-
... More
Installation of corrosion monitoring probes including 2 Flareweld on station piping at desired location and 12 OClock position for mounting of ER Probe under the supervision of site engineer. Flareweld assembly shall be supplied by owner. The job complete in all respect with material, tools & tackles, consumables etc.
1
18359
-
... More
CSW-DAHEJ-COMPOSITE-ITC
-
-
-
... More
A CIVIL
-
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in widt h as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed b y the Engineer-in-Charge :
-
-
-
... More
In all kinds of soil
134.54
24305
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
6.91
13406
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from n atural sources]
22.41
139343
-
... More
1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from n atural sources]
7.23
41583
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
252.22
71372
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto pli nth level :
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
13876.3
1151094
-
... More
Extra for providing richer mixes at all floor levels. [Note: Excess/ less cement over the specified cement content used is payable/ recoverable separately] :
-
-
-
... More
Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. [Note: Cement content considered in M-30 is @ 340 Kg/cum]
92.48
6407
-
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein. [Note: Unit "QN" shall me an "QUINTAL"]
9.25
6187
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mix, manufactured in fully automatic batc h ing plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mi x design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , ex cluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as pe r IS:9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direct ions of the Engineer-in-Charge. [Note : Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per des ign m ix is payable/ recoverable separately] :
-
-
-
... More
All works upto plinth level
92.48
771596
-
... More
Supplying and providing non-shrinkable cement grout (SHRINKKOMP 20 or any other equivalent approved brand) for grouting holding down bolts in pocket holes for equipment foundation, including necessary surface preparation mixing of grout, curing as per manufacture r 's recommendation/ specification and directions of the Engineer-in-Charge. [Note: This item shall be operated under specific instr uc tions of the Engineer-in-Charge]
3010.55
193466
-
... More
Painting foundation concrete (RCC) with hot bitumen of grade VG-10 @ 17 Kg/10 sqm including cleaning the foundation concrete with br ushes etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
11.16
5737
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
38.33
242793
-
... More
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cu t ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including p re paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supply ing & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGE R or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all lab our, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of conc rete work).
2.32
268579
-
... More
Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provision for lift ing arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specific a tions and directions of the Engineer-in-Charge.
86.9
424782
-
... More
Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 la id to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all lab o ur, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
31.17
19295
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
... More
1:6 (1 cement : 6 fine sand)
192.5
56003
-
... More
15 mm cement plaster on rough side of single or half brick wall of mix :
-
-
-
... More
1:6 (1 cement : 6 coarse sand)
30.51
9211
-
... More
6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
12.8
2890
-
... More
Neat cement punning.
13.5
841
-
... More
Supplying and using water proofing compound like CICO, PUDDLE or any other approved brand with Cement Plaster/ CC/ RCC complete in a ll respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the E n gineer-in-Charge.
28
3508
-
... More
Providing and filling bituminastic compound in 50mm thick x 150mm deep grooves around foundations, in floors, pavements and expansio n joints, etc. complete as per directions of the Engineer-in-Charge.
48.9
34775
-
... More
B TELECOM
-
-
-
... More
Supply, erection and installation of GI Pipe of 100 mm nominal bore medium Class B as per IS1239 subject to owner's approval including the supply & installation of all necessary pipe fittings such as bends, sockets, elbows, tees etc. bending, threading, clamping, plugs, packings, bushing etc. as required for sub ducting HDPE duct as per directions of Engineer-in-charge/ Site Engineer including cost of all labour, tools, materials complete in all respects.
20
27187
-
... More
Supply and installation of IDF (intermediate distribution frame) / Distribution box of 20 Pair capacity with mounting arrangement as per specifications
1
4482
-
... More
Supply and installation of IDF (intermediate distribution frame) / Distribution box of 10 Pair capacity with mounting arrangements as per specification.
2
9008
-
... More
Supply and installation of MDF (Main distribution frame) /Distribution box of 50 Pair capacity as per specifications
1
6005
-
... More
C INSTRUMENTATION
-
-
-
... More
Installation, testing and commissioning of Pressure Indicator (PI) of various ratings as per drawings, recoomendations of OEM and d irections of Engineer in-charge/ Site engineer
1
4269
-
... More
INSTALLATION OF PI+PS/PT: Installation, assistance in testing and commissioning of Pressure gauges and Pressure switches (PI+PS) / p ressure Gauge and pressure transmitter (PI+PT) of various ratings as per the directions of Engineer-in-charge/ Site engineer and dra wings
10
87423
-
... More
INSTALLATION OF PT / PS: Installation, assistance in testing and commissioning of Pressure Transmitter (PT) / Pressure Switch (PS) o f various ratings as per the directions of Engineer in-charge/ Site engineer and drawings.
10
98738
-
... More
INSTALLATION OF DPT: Installation, assistance in testing and commissioning of Differential Pressure Transmitter (DPT) as per the dir ections of Engineer in-charge/ Site engineer and drawings.
2
28481
-
... More
INSTALLATION OF TEMPERATURE TRANSMITTER WITH THERMOWELL: Installation and assistance in testing & commissioning of temperature eleme nts/temperature transmitter(TT) by making necessary holes on the pipes, welding the socket for thermowell on the pipe including sup ply of boss, silicon paste etc as per the directions of engineer in-charge/site engineer and drawings.
2
17275
-
... More
INSTALLATION OF SURFACE MOUNTED TEMPERATURE TRANSMITTER Installation and assistance in testing & commissioning of Surface Mounted te mperature elements/temperature transmitter (TT) by by welding the weld pad on the surface of the pipe, silicon paste as per the dir ections of engineer in-charge/site engineer and drawings.
1
12074
-
... More
INSTALLATION OF EMERGENCY SHUTDOWN SWITCH: Installation and testing of emergency shut - down (ESD) Push button. This includes mounti ng of termination box as per the drawings, specification and instruction of Engineer in-charge/ Site engineer, replacement of broken glass covers and painting it in red colour.
5
56116
-
... More
INSTALLATION & TESTING OF SCRAPPER DETECTOR: Installation, assistance in testing and commissioning of Scrapper Detector of various ratings aas per OEM recommandations, vendor drawings, directions of engineer in-charge/site engineer and other approved drawings.
1
6078
-
... More
FLOW METER INSTALLATION - Taking delivery, shifting to installation site within the station premises, erecting and installing of the flow meter along with reducers and flow meter electronics/ flow transmitter. Providing assistance to control system vendor/meter su pplier in testing and commissioning of the turbine/ ultrasonic / coriolis mass flow meter / clamp on ultrasonic ete etc.. Making str uctural supports and fittings, clamps, screws, nuts, bolts, making the cable supports and terminating cables at panel and field ends . Mounting the junction boxes as per drawings,manufacturer's instructions, specification and direction/instruction of engineer in-ch arge/site engineer. Job shall include termination of cables at both fiels ends and control panel ends, supply of suitable size non-f lame proof cable glands at control panel and the cost of all labour, tools, materials, etc. including labelling, tagging using SS pl ates painting, glanding, ferruling complete in all respect.
2
43107
-
... More
INSTRUMENTATION JOBS FOR PRESSURE CONTROL VALVE / FLOW CONTROL VALVE - Testing of control valve and field electronics, including fab rication of all structural supports and fittings, termination of related cables at field, panel & MCC end, after loop testing as per vendors drawing and direction of the site engineer. Mounting of junction box if any, supply of non flame proof cable glands for pa neland MCC end. The works includes tagging, labelling, glanding andferruling at both panel and field ends.
1
23058
-
... More
INSTALLATION OF JUNCTION BOX/ PUSH BUTTON STATION - for MOV/ROSOV: Installation of non-flame proof junction box, explosion proof / flame proof junction boxes, Push button stations for MOV/ROSOV for marshalling of control cables, terminating the cables at field a nd control panel end, mounting the junction boxes/Push button station, connecting to earthing grid by supplying and installing all t he required materials such as supporting structure, canopy, cable gland hood, cement concrete, painting, GI wire etc. (excluding sup ply of the Junction Boxes/Push button station) in all respects complete as per specifications, drawings and direction of site Engine er including supply of suitable size non-flame proof cable glands at Control Panel end and the cost of labour,tools, materials, glan ding, ferruling etc. complete in all respects.
50
289911
-
... More
INSTRUMENTATION JOBS FOR MOTOR OPERATED VALVES (MOV)/ROSOV/ROV - Carrying out the instrumentation and control system jobs on the alr eady erected actuator assembly of motor operated valves (MOV)by making the necessary cable connection at field and control panel end (excluding the supply of cables) calibrating the control components, adjusting the limit switches, testing the whole assembly as p er drawings specifications and direction of the engineer in-charge/site engineer complete in all respect, including supply of suitab le size non-flame-proof cable glands, ferruls, drilling/cutting of plate for fixing glands at Control Panel end and the cost of all labour, tools, glanding, ferruling, consumables etc.
25
156283
-
... More
INSTALLATION OF CONTROL PANEL/CONSOLE DESK/ UPS/ RIO/ RTU/ PLC/ ACDB - Taking delivery, shifting the panels to installaion site and erection, installation, testing of Control panels, mounted with all the instruments, power supply units, UPS & battery banks logic control systems , barriers, providing assistance to control system vendor for commissioning of control system including panels, cont rol/console desk etc. installation on already made foundations or fixing on walls, or steel structure or fixtures aligning, levellin g, grouting, inter-wiring outgoing, incoming cable terminations as required, earthing, testing, complete in all respects as per draw ings, specifications and directions of the engineer in-charge/site engineer, including supply of suitable size non-flame proof cable glands for all incoming/outgoing cables and the cost of the materials, tools, labour, glanding, ferruling etc. complete in all resp ects.The indicated quantity is cumulative weight of panels.
1500
58126
-
... More
STEEL STRUCTURAL WORKS - Supply, fabrication, erection and installation of steel/GI structural works of any type and shape such as c able racks, trays, push button, control posts, ladders, lugs, chain link, fencing, angles, joints, channels, plates, flats, bars etc as required as per specifications, drawings, directions of site engineer/engineer in-charge, inlcuding cost of all labour, material s, tools, consumables etc complete in all respects. Job is inclusuve of taking delivery from owner's go down and shifting to site wh erever required.
400
60033
-
... More
Installation of Manual Call Point (Explosion Proof & Weather Proof) in Hazardous area, terminating the cables at field and control p anel end, connecting to earthing grid by supplying and installing all the required materialssuch as supporting structure, cement con crete, painting, GI wire etc.(excluding supply of the Manual Call Point) complete in all respectsas per specifications.
4
14078
-
... More
AIR CONDITIONER CASSETTE TYPE - Supply & Installation of 1.8T Cassette Type ACs flushed with false ceiling (Daiken / Hitachi / Car rier) along with 5KVA Voltage Stablizer & MS stand for outdoor unit, refregerant piping, drain piping complete as per instruction of EIC / Site Engineer
10
1655073
-
... More
INSTRUMENTATION JOBS FOR MOTOR BOOSTER PUMPS - Erecting & installing all instruments such as vibration switch, RTD, level switches e tc on the already erected Booster pump unit. Supply, fabrication and erection of all pipe fittings as required such as pressure pipe s, nipples & valves, plugs, tees and installation & testing, calibration of Instrumentation and control circuit in electrical feeder s of Booster Pumping Units as per the direction of Site Engineer/Engineer in-charge. Job complete in all respect including cost of all labour, consumables, tools, services rendered etc. including supply and fitting of clamps, screws, nuts,providing assistance to control system vendor in commissioning of booster pumping unit and supply of suitable size flame proof cable glands and termination of related cables at field, control panel and MCC panel ends as per scope, mounting of junction boxes, loop testing, cement concrete complete and painting. The work includes labelling, glanding, tagging, ferruling at both the ends.
3
60582
-
... More
D MECHANICAL
-
-
-
... More
Supply and Erection of Structural Steel: Supplying at site, steel structural items such as steel plates, bars, MS gratings, chequere d plates, angles, beams channels, commercial quality heavy pipes, C.I. Rollers, bolts & nuts, washers, grouting bolts, padding plat e s etc., fabrication and erection of saddle supports and other type of supports for pipes manifolds and valves, fabrication and ere ct ion of platforms walkways, stairways etc., sand blast/ power brush cleaning, priming and painting the finished structures includi ng supply of all other inputs such as labour, materials, consumable etc. necessary to perform and complete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC.
10
1124512
-
... More
" Supply and Erection of Electroforged Grating: Supply and Erection of Electroforged Grating Supplying at site, steel structural ite ms such as steel plates, bars, fabrication of gratings by electroforged method, after complete fabrication entire gratings shall be Hot Dip galvanized, gratings shall be normally of size 810mm X 250mm for steps and 1200mm X 1000 mm or 810mm X 1000 mm for platform s / walkways, or any size as advised by EIC. Placing gratings in a replaceable manner bolting with base frame of ISA by suitable GI c lamps and GI fasteners, including supply of all other inputs such as labour, materials, consumable etc. necessary to perform and com plete the work in all respect, in accordance with drawings, specifications and instructions of the Site Engineer / EIC. "
1
190377
-
... More
Painting: Cleaning exposed steel surfaces of piping, equipment and valves etc. by abrasive blasting or with power wire brush (wherev er abrasive blast cleaning is not possible) free of dust, grease, mill scales etc. priming with one coat of primer and painting the surfaces with two coats as per specification, with approved materials, paints, brushes, labour, equipment etc. and completing the j o b in all respects as per specification and instructions of the Site Engineer / EIC. All materials including supply of paint are in t he scope of contractor.
-
-
-
... More
Zinc Ethyl Slicate Primer
1250
672128
-
... More
High Build EPOXY MIO
1250
485260
-
... More
Isocynate Aliphatic Poly Urethene(PU)
1250
616166
-
... More
"PU /liquid epoxy Coating of under ground piping: Cleaning exposed steel surfaces of piping, equipment and valves etc. by sand blast ing or with power wire brush (wherever sand blast cleaning is not possible) free of dust, grease, mill scales etc. and applying sing le layer polyurethane coating(PU) using 100% Solvent free elastomeric polyurethane/ liquid epoxy, with approved materials, labour, equipment etc. and completing the job in all respects as per specification and instructions of the Site Engineer / EIC."
250
559679
-
... More
"Copper Strips/ Flats for Jumpers for Flanged Joints of the Product Process Piping: Supply and Installation of one copper jumper per flanged joint across the flanged joints for valves, spool piece, branch offs etc., of product process piping, The job includes cut t ing drilling of holes of required size in the copper strips/ flats for bolting purpose and complete the works in all respects as p er specifications & drawings and instructions of Site Engineer/ EIC. Note: Copper jumpers shall be installed in all the flanged joi nts of Product Process piping only and not in fire water lines. "
-
-
-
... More
Up to 30 mm wide x 3 mm thick Copper strip
30
20436
-
... More
30 - 50 mm wide x 3 mm thick Copper strip
30
32801
-
... More
"HOT/EOT CRANE: 7.5 Ton cap EOT crane for Booster pump shed, manufacture, inspection & testing at manufacturer's works and supply of HOT/ EOT cranes (having main girder beam with box type construction) as per specifications, taking delivery, shifting / transport ing within the pump station premises and erecting on the shed Girder, assemblies / sub-assemblies, auxiliaries, girders etc, aligni ng checking for free movement of the crane from one end to other and cross movement, cleaning by sand blasting, priming, painting a s per painting schedule testing of the crane with specified load in presence of the m anufacturer's representative including providi ng all labour, materials, equipments and consumables necessary to perform and complete the works in all respects as per specificatio ns, drawings and instructions of Site Engineer / EIC. "
1
4129633
-
... More
" Medium Velocity Water Sprinkler System (Automatic) : Design, Detailed Engineering, supply, fabrication, erection/Installation and commissioning of complete medium velocity water sprinkler systems for, barrel area, filtratio n, metering and piping area at each lo cation as per the details mentioned below: Medium Velocity Water Sprinkler System: Automatic Medium velocity water Sprinkler System for, barrel area, filtration, metering and Piping Area: Design, detail engineering, drawing and development of scheme for automatic medium velocity water sprinkler system for the equipment and piping area including supply of all material like Deluge valve(Wet Type / Dry Type), Spray nozzles, pressure switch , pressure gauge, piping, valves, flanges, coupling, pipe fittings, brackets, clamps, fa steners, solenoid switches, S.S piping, stra iners, along with all accessories as per the approved scheme at site , erection and ins tallation of piping, cabling, equipments and instruments control panel etc, provision of compressed air/pneumatic piping from owner' s compressed air header located near compress or room for Dry Type Deluge Valve including dismantling, breaking of road etc. as requ ired for setting out of the system and making good the same, hooking up the system with the hydrant network, sand blast cleaning, pr iming and painting (Zinc Ethyl Silicate Primer, Hig h Build EPOXY MIO, Isocynate Aliphatic PolyUrethane(PU) in sign al red colour); internal coating with liquid epoxy, Carrying out all electrical and instrumentation works to enable auto actuation of the deluge val ve and medium velocity water sprinkler system based on alarm signal from QB sensors/ gas detectors/ flame detectors. Carrying out th e electronic integration of the system with the control panel and providing alarm and automatic actuation of the deluge valves with manual over-ride provision, testing & commissioning of the system including cost of all labour, services, materials tools & tackles consumables, first operation & furnishing of operation and maintenance manuals on lump sum basis as per sp ecifications, Internation al standard procedures, approved scheme, drawings and the direction of Site Engineer /EIC. Note:1. The control panel and control con sole with PC will be installed under the work of Gas detection system and the MV system is to be integrated with the existing system . 2. For System Designing/Area Calculation & inter distances between block facilities refer the General layout plan and Assembly Pip ing Area of respective Station "
1
2661978
-
... More
"Medium Velocity Water Sprinkler System for Extended Mainline Pump Shed: Design, Detailed Engineering, supply, fabrication, erection /Installation and commissioning of complete medium velocity water sprinkler systems for, barrel area and piping area at each locati o n as per the details men tioned below: Medium Velocity Water Sprinkler System: Manual Medium velocity water Sprinkler System for, barrel area and Piping Area: Design, detail engineering, drawing and development of scheme for manual medium velocity water sprinkle r system for the barrels (Scraper Launching Barrel and Scraper receiv ing Barrel) and piping area including supply of all material l ike Deluge valve(Wet Type), Spray nozzles, pressure switch, pressure gauge, piping, valves, flanges, coupling, pipe fi ttings, brack ets, clamps, fasteners, solenoid switches, S.S piping, strainers, along with all accessories as per the approved scheme at site, ere ction and installation of piping, equipments et c, including dismantling, breaking of road etc. as required for setting out of the s ystem and making good the same, hooking up the s ystem with the hydrant network, sand blast cleaning, priming and painting (Zinc Eth yl Silicate Primer, High Build EPOXY MIO, Isocyna te Aliphatic Poly Urethane(PU) in signal red colour); internal coating with liquid epoxy. Testing & commissioning of the system including cost of all labour, services, materials tools & tackles consumables, first o peration & furnishing of operation and maintenance manuals on lump sum basis as per specifications, International standard procedur es, approved scheme, drawings and the direction of Site Engineer /EIC. Note: For System Designing/Area Calculation & inter distances between block facilities refer the General layout plan and Assembly Pi ping Area of respective Station "
1
2667392
-
... More
E ELECTRICAL
-
-
-
... More
GI CABLE TRAY Supply, installation & fixing of prefabricated perforated GI cable trays of width 150 mm, 300 mm, 450 mm & 600 mm as p er site requir ement for laying of cables with standard rung spacings. Load for support span of 2.5 meter as 30, 60, 75 & 90 -in Kg/ Mtr- respective ly with concentric static load as 70 Kg at the centre, with materials, labour, tools and tackles, consumables etc , as per drawings , specification and directions of Site Engineer / Engineer in Charge
2950
568934
-
... More
SAND FILLING Supplying and spreading of approved quality fine dry river sand in cable trenches including the cost of all material, t ransport, loa d and lift charges, labour, tools and tackles, consumables etc , as per drawings, specification and directions of S ite Engineer / Engineer in Charge
350
288158
-
... More
BRICK SOLING Supply and laying of approved quality 75 mm thick second class brick flat soling with sand filling in the interstices, in cable tren ches for protectionincluding the cost of all brick and sand, labour, load and lift charges , tools and tackles etc , a s per drawing s, specification and directions of Site Engineer / Engineer in Charge
950
816379
-
... More
CABLE MARKER Supply, erection & installation of MS cable markers, including excavation, installation of the markers, cement concrete grouting, ba ckfilling, materials, labour, tools and tackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer in Charge
50
120809
-
... More
LT Cable joint -1.1 KV- Making straight through joints on Al/Cu conductor XLPE/PVC insulated armoured cable including the supply of required materials such as cable jointing kit -of heat shrinkable sleeve type of Raychem/Mseal/3M- , materials, labour, tools and t ackles, consumables etc , as per drawings, specification and directions of Site Engineer / Engineer in Charge
-
-
-
... More
Power cables LT OD upto 20 mm
1
4765
-
... More
Power cables LT OD above 20 mm and upto 40 mm
1
5916
-
... More
Power cables LT OD above 40 mm and upto 60 mm
6
51141
-
... More
EARTH ELECTRODES Supplying, installation, testing of GI earthing electrode, including the supply and installation of the CI cover, charcoal /special backfill etc. and construction of chamber; complete as per drawings,specifications and directions of the Site En gineer, Including the cost of all labour, tools, materials etc. complete in all respects.
20
338107
-
... More
EARTHING SYSTEM SET -03 PITS- Supply, installation, testing of earthing system consisting of 3 earth pits of perforated GI pipes ear thing electrodes and copper plate terminal block including construction of chamber using cement concrete with earthing pit cover and frame, supply of charcoal / /special backfill , salt etc including supply of interconnecting cables / strips including necessary we lding etc complete as drawings, specifications and directions of the site engineer/Engineer in charge, including cost of tools, mate rials etc complete in all respects . The job shall also include testing of each earth pit and the entire earthing system on whole. N ote Earthing for field instruments shall be provided from Station earth grid covered in Electrical SOR.
1
62258
-
... More
ACE Chemrod Earthing Supply, installation, testing and commissioning of ACE -Artificial concept of earthing with chemical rod- Chemrod earthing electrode by digging earthing Item includes the supply and installation of the CI/RCC cover in the earth pit, ba ckfilling etc. and construction of chamber; complete including excavation, backfilling and supply of all materials required for m a king earth pit as per drawings, specifications and directions of the Site Engineer, Including the cost of all labour, tools, mate ri als etc. complete in all respects.
1
17150
-
... More
EARTHING PLATE Supply & Installation of G.I. earthing plate as per drawing no. 9200 99900 404 009 00 outside the buildings. The item also includes grouting of the plate as shown in the drawing. The item should be complete in all respect including all materials, to ols, tackels et c. and as per direction of EIC / Site engineer.
6
9630
-
... More
EARTH STRIP / WIRE / ROPE / CABLE Supply, installing and testing of earthing strip/wire/rope/cable for completely making the earthi ng grid system by supplying, layin g the GI / Cu strip and making all the necessary welding joints, connecting to the earthing e lectrodes and existing earthing g rid etc., complete as per drawings, specifications and directions of the Site engineer/Engineer in charge, including the cost of al l labour, tools, materials, etc. complete in all respect.
-
-
-
... More
50 mm X 6 mm G.I. earthing strip
500
148420
-
... More
40 mm X 5 mm G.I. earthing strip
700
144888
-
... More
25mm x 3 mm copper flat
40
25895
-
... More
GI wire -8 SWG-
400
25610
-
... More
Copper cable as per specifications 10 Sq.mm
250
43972
-
... More
Copper cable as per specifications 100 Sq.mm
75
153938
-
... More
Supply, erection & installation of cable conduits made up of GI pipes of medium class B subject to owners approval in trenches -a lr eady made-, on walls, concrete structure etc., including supply and installation of all the necessary pipe fittings such as bends, sockets, elbows, tees etc., bending, threading, binding, clamping, providings, spacers, plugs, packings, bushings etc., as required Job complete in all respects including the cost of all labour, tools, material etc. and as per specifications and directions of s ite engineer / Engineer in Charge.
-
-
-
... More
25 mm
60
28140
-
... More
50 mm
210
212206
-
... More
100 mm
45
81425
-
... More
STEEL STRUCTURAL WORKS Supply, fabrication, erection, installation of steel structural works of any type and shape such as cable rak s, cable trays, push bu tton control posts etc., as required job complete in all respects including the cost of all labour, tools, material etc., complete. and as per specifications and directions of site engineer/ Engineer in Charge.
900
134109
-
... More
FLAME PROOF FITTINGS Note All equipment under this category shall be suitable for location in zone I gas group IIA & IIB -Temp. c lass T3- area with a se parate terminal box for incoming cable and a separate terminal box for out going cable -where applicable-, a part from separate enclo sure for each equipment including control gear etc. in IP 65 cast aluminium LM 6 certified enclosure.
-
-
-
... More
FLP/WP PUSH BUTTON STATION Supply ,erection,testing and commissioning of FLP/WP push button-ON/OFF- control station of approved ma ke with /without ammeter for the motor off control at field including connection and termination of copper control cable, fabricatin g, earthing the supporting structure, painting the same, including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries including the cost of all labour ,tools, materials etc. complete in every respect as per t he specification and directions of the Site Engineer/Engineer in charge. With Ammeter
3
29898
-
... More
FLP/WP DISTRIBUTION BOARDS Supply, erection, installation, testing and commissioning of flameproof /weather proof -IP 65- distri bution board as per technical specification of types mentioned for lighting purpose in MLPU / booster shed etc., including connectio n and termination of power cables, earthing wire and conduits etc. including including supply & installation of double compression c able glands & flame proof plugs for sealing all spare entriescomplete as per drawings, specifications and direction of the Site En gi neer, including the cost of all labour, tools, consumable materials etc. complete in all respect. Outdoor Type, floor mounted, fl ameproof, weatherproof -IP 65- Lighting Distribution board Type I DB with Bus bar 100 A TPN, Incom er 1 no. 63 A TPN MCB & Outg oing 9 no. 10 A SPN, MCB
1
90853
-
... More
FLP & WP JUNCTION BOX Supply, erection, installation, testing and commissioning of flameproof & weather proof junction box for prov iding cable terminatio n of motor, including connection and termination of earthing wire and conduits etc., including supply & insta llation of double compr ession cable glands & flame proof plugs for sealing all spare entries complete as per drawings, specificatio ns and direction of the Site Engineer, including the cost of all labour, tools, consumable materials etc., complete in all respect 4 way junction box with 4 cable entries -4 x 3/4 - at bottom & 20 nos. terminals.
4
34131
-
... More
FLP/WP SWITCH CUM SOCKET Supply, erection, installation, testing and commissioning of flameproof /weatherproof switch cum socket /welding receptacle of appr oved makes to be installed on walls, coloumns, structures, including supply & installation of double com pression cable glands & flam e proof plugs for sealing all spare entries etc., including connection and termination of earthing wire and conduits., etc. complete as per drawings, specifications and direction of the Site Engineer, including the cost of all labour, tools, consumable materials e tc. complete in all respect 415V, 63A, Switch & Socket with Plug -No. of Pins 3P +N+ E-, Model EPSS 1563 61 of Baliga or Equivalent approved make
1
18645
-
... More
FLP/WP EXHAUST FANS Flame proof, weather proof, single phase, 12 exhaust fan, IP65, LM6 type EF1001 of FCG or equivalent alongw ith supporting frame, bolts, louvers, flame proof motor, including supply & installation of double compression cable glands & flame proof plugs for sealing all spare entries, complete in all respects FLAMEPROOF EXHAUST FAN,12 , SUITABLE FOR Exd Gas Group II C, as per IS/IEC 60079 2007
1
9266
-
... More
FLAMEPROOF TUBELIGHT, 2x22Watt, LED, SUITABLE FOR Exd Gas Group II C, as per IS/IEC 60079 2007
4
37397
-
... More
FLAMEPROOF LED FITTING 90 W, Exd -Flameproof- Flood light fixture Supply, installation, testing & commissioning of Exd -Flameproo f- flood Light Fixture with provision of Cable Entries 2 Nos. x 3/4 ET, Cable Glands 2 Nos. x 3/4 ET -Max. OD 20mm- Exd-IIA/I IB-, Double Compression type, Brass Nickel Plated with PVC Hood. Blanking Plug 1 No. x 3/4 ET Exd, Brass Nickel Plated. Gasket Neoprene, Hardware SS 304, Earthing External 2 Nos. -M6-, Internal 1 No. -M5-, and as per attached detailed technical specificatio n.
8
116200
-
... More
FLAMEPROOF LED FITTING 125W, Exd -Flameproof- Flood Light Fixture, Aluminum -LM 6-, Classification Zone 1&2, Gas Group IIA/IIB, IP 65, T6. Complete with optics, Glass Toughened Clear Well Glass, Wire Guard M.S. Epoxy Painted -White Color- with provision of Cab le Entries 2 Nos. x 3/4 ET, Cable Glands 2 Nos. x 3/4 ET -Max. OD 20mm- Exd-IIA/IIB-, DC, Brass Nickel Plated with PVC Hood. Blanking Plug 1 No. x3/4 ET Exd, Brass Nickel Plated. Gasket Neoprene, Hardware SS 304, Earthing External 2 Nos. -M6-, Inte rnal 1 No. -M5-, Mounting Arrangement withM.S. Bracket Suitable to Ceiling mounting -With Type B Suspension Bracket / Eye Bolt-. Fi nish Epoxy Powder Coated Grey Shade 631 of IS 5.
12
319108
-
... More
SHOCK TREATMENT CHART Supply and installation of shock treatment chart framed in good quality glass in English / Hindi / Local Lan guage-.
2
4506
-
... More
CAUTION BOARD Supply and installation of vitreous enamel caution boards suitable for 440 V/11KV/6.6 KV as per IS 255 including fi xing on the wall with all the required hardware etc. complete in English / Hindi/ Local Language.
4
9103
-
... More
STAINLESS STEEL INSCRIPTION PLATE Supply and installation of approved quality stainless steel name inscription plates including a nodising, engraving the inscriptions, providing screws, etc. for equipments viz. motors, motor control centres, switchgears, push bu tton stations etc. as required, providing necessary holes tapping etc. and fixing the same complete in all respect as per the direc tion of Site Engineer/Engineer in charge including the cost of all labour, tools etc.
10
10435
-
... More
PLASTIC INSCRIPTION PLATE Supply and installation of approved quality plastic name inscription plates including engraving the in scriptions, providing screws, etc. for equipments viz. motors, motor control centres, switchgears, push button stations etc. as requ ired, providing necessary holes tapping etc. and fixing the same complete in all respect as per the direction of Site Engineer/Engi neer in charge including the cost of all labour, tools etc.
10
8483
-
... More
Point wiring Supplying, installation and testing with 1.5 Sq.mm stranded PVC insulated copper conductor wires for phase & neutral of 650V grade i ncluding earthing by providing 1.5 Sq.mm earth insulated continutity wire of copper in PVC conduit -Supply & installat ion of PVC con duit covered elsewhere in SOR- recessed on wall/ceiling/ false celing including supply & installation of switch boxes ,junction boxes , pull boxes, bushes, screws, check nuts, bends, modular switches and sockets . The circuit wiring with 4 Sq.mm PVC copper wire fro m D.B. to switchboard as required is also in the scope of the contractor.
-
-
-
... More
1 light point controlled by 1 switch.
20
27080
-
... More
2 light points controlled by 1 switch
15
24470
-
... More
3 light points controlled by 1 switch
10
20798
-
... More
4 light points controlled by 1 switch
1
2485
-
... More
Wiring with PVC insulated 2.5 sqmm copper conductor wire for fan points -1 fan point controlled by 1 modular switch- including provi ding space for electronic regulator in switch box , providing and fixing fan hook in the ceiling as per specifications and drawings .
5
10597
-
... More
Wiring with PVC insulated 2.5 sqmm copper conductor wire for phase & neutral , 650 V grade including earthing , the third pin with 1 .5 sqmm copper conductor earthing insulated continuity wire for exhaust/ wall bracket fan including providing and fixing of 5 pin 6 A modular socket and 10 A modular switch near the door or as as per specifications and drawings. The circuit wiring shall be with 4 sq. mm PVC copper wire from switchboard to 1st exhaust fan for multiple exhaust fans in one circuit.
12
26167
-
... More
Wiring for 250 V single phase and neutral 16 amps modular power plug point with PVC insulated 4 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 2.5 sq. mm copper conductor earthing insulated continuity wire, complete with providing and fixing of 6 pin 16/6A modular socket and 20/10 A modular switch -1 plug point per circuit- as per specif ications and drawings
12
39728
-
... More
Wiring as in item no. 1 for 250 V single phase and neutral 6 amps modular plug point with PVC insulated 2.5 sq. mm. copper conductor wires for phase & neutral, 650 V grade including earthing, the third pin with 1.5 sq. mm copper conductor earthing insulated contin uity wire, complete with providing and fixing of 5 pin 6A modular socket and 10 A modular switch -1 plug point per circuit- as per s pecifications and drawings.
12
28906
-
... More
Point wiring for power plug point with 4 sq.mm stranded PVC insulated copper wire including earthing the third pin with 2.5 sq. mm c opper insulated earthing wire complete with supply and fixing of recessed mounted industrial type 3 pin 32 A metal clad socket and plug, 20A MCB -Motor duty- housed in a 16 gauge M.S. Box
10
36580
-
... More
Lighting Distribution Board / AC Distribution Board Supply , installation, testing and commissioning of TPN lighting / AC Distributi on board of approved make as per appendix 1, with rating and feeders as per specification. The DB shall be of IP 42 protection cla ss and shall conform to IS 8623. The board shall be fitted with an acrylic door as per specifications and drawings
-
-
-
... More
Type III Distribution Board Double Door EURODB of Havells or equivalent approved make having bus bar 200 A TPN, 1 Incomer 125 A F P MCB Isolator with 125 A FP RCCB -Senstivity 100 mA- alongwith 3 numbers 63 A TPN MCB as per specification
2
194090
-
... More
Type IV DIstribution Board Double Door Translucent Euro DB of Havells or approved make as per appendix 1, having 100 A TPN Copper Bus bar, 1x63 A TPN MCB , 1x63 A RCCB -100 mA Sensitivity-, 9x6A SP MCB & 6x20 A SP MCB as per specification
4
351784
-
... More
Type V Distribution Board Double Door, EURO DB of Havells or equivalent approved make having 200 A TPN Bus Bar, 1 x 100 A FP MCB, 1x100 A FP RCCB -100 mA Sensitivity-, 9x32 A SPN Motor duty MCB as per specification
2
149055
-
... More
Critical Light DB Euro DB DBOXx of Havells or equivalent make complete with bus bar, neutral links, earth links and 1 x 6 A MCB SP N & 7x2 A SPN MCB
2
20753
-
... More
Decorative Light fittings Supply, installation, connection, earthing and testing of the following fittings,including supply and inst allation of drop pipes, ho oks, fittings, fixtures, nuts,bolts, supports, on walls, outlet box for regulators and all other required materials etc. as per spec ifications, drawings and directions of the Site Engineer including cost of all labour, tools, materials etc. complete in all respect s.Make of the fittings can be the make mentioned in the respective SOR items or equivalent model from t he approved make list given i n the specifications.
-
-
-
... More
DN170C LED10S 6500 PSU WH Supply and fixing of surface mounted weather proof light DN170C LED 15 W having 1000 lumens output fittin g of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation.
10
76104
-
... More
LED light fittings, Recess mounting type, Sereno LED RC869B LED 30S 6500 PSE W30L120 D8 or equivalent approved make with LEDs Suppl y and fixing of recess mounted weather proof light Sereno LED RC869B LED 30S 6500 PSE W30L120 D8 or equiavlent approved make with L EDs, 42 W or more, having 2950 lumens or more output. LED Fitting of PHILLIPS or equivalent approved make complete with all accessor ies such as LED module, driver, optics, thermal sink, connector blocks etc including installation with LED of approved make.
35
245176
-
... More
LED light fittings with LEDs, Sereno LED Suspended SP824 P LED 30S 5000 GR OD or approved equivalent Supply and fixing of surface mo unted weather proof light SP824 P LED 42 W having 2950 lumens output fitting of PHILLIPS or equivalent approved make complete with all accessories such as LED module, driver, optics, thermal sink, connector blocks etc including installation with LED of approved m ake.
20
195267
-
... More
Ceiling fan with electronic regulator & other accessories and fittings etc. of or approved make as per appendix 1 with the followi ng sweep size 56 Sweep
5
17200
-
... More
12 Oscillating wall mounted bracket fan, noiseless, plastic moulded construction, rotary device for 3 step speed control integrated unit of approved make with all accessories complete in all respect.
5
44820
-
... More
Exhaust fan Supply, installation, testing of single phase 230 V, industrial type heavy duty exhaust fan of GEC/Usha/Crompton Greaves or of appro ved make as per appendix 1 fitted/ provided with louvres, supports etc. including making the required opening on walls , fixing and connecting the wires etc. including earthing the body of the fan, making good the opening on the wall etc. complete as per specifica tions, drawings and direction of Site Engineer including the cost of all labour, tools, materials etc. complete.
-
-
-
... More
18 Sweep
3
30588
-
... More
12 Sweep
4
25165
-
... More
PVC Conduit pipes Supply, installation, fixing in position, PVC conduit pipes, of ISI marked , in concrete, brick work etc. during o r after constructi on by making grooves in the wall, ceiling etc. cutting threads and jointing the pipes with PVC couplers, providin g necessary tees, b ends, junction boxes etc. with 12 SWG GI wire inside conduit without joint for concealed wiring, including makin g good the concrete, brick work, surfaces etc. complete as per drawings and direction of Site Engineer / Engineer in charge includi ng cost of all labour , materials etc.
-
-
-
... More
19 mm
150
16869
-
... More
25 mm
150
23852
-
... More
32 mm
75
14003
-
... More
Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type -NP3-, centrifugally cast conforming to I.S .458 with 1 3 6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jo inting of pipes with stiff mixture of cement mortar in the proportion of 1 2 - 1 cement 2 fine sand-, testing of joints, complete i n all respects as per specifications, drawing and the direction of the EIC/Site Engineer 200 mm dia
10
14696
-
... More
Supplying and laying reinforced cement concrete light duty hume pipe, non pressure type -NP3-, centrifugally cast conforming to I.S .458 with 1 3 6 concrete casing at joints as required with necessary slope including excavation, backfilling, supply of collars, jo inting of pipes with stiff mixture of cement mortar in the proportion of 1 2 - 1 cement 2 fine sand-, testing of joints, complete i n all respects as per specifications, drawing and the direction of the EIC/Site Engineer 300 mm dia
10
27779
-
... More
Supply fixing and erection of moidular cable transit -MCT- for cable entry to building in proper frame including supply of peelable type, spare block, stay plates compression wedgs etc. with all accessories as per specification considering 20 % minimum spare in e ach module to be installed as per instruction of Engineer in charge/ site engineer Galvanised mild steel frame with packing spac e of Min.120x240 mm with multi diameter blocks and accessories with peeling off arrange ment to adjust cable size from 3.5mm to 99mm outer dia
2
37872
-
... More
Supply, erection, installation and testing of 30M high mast shaft in three sections suitable for wind speed as Per IS 875, with raising lowering system comprising, head frame, luminaries carriage suitable to install 24 nos luminaries of BENP 20FL 350W LED of Bajaj Make or Equivalent in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial, including 1 set foundat ion bolts manufactured from special steel along with nuts, washers, anchor plates and templates. This includes Supply and installation of 24 nos. Integral LED Flood Light Luminaire with the following components 02 nos Aluminum Cast luminary body, 02 nos Electronic Circuit & LED drivers, 02 nos Weather proof Transparent Cover, 02 nos Luminary Mounting Clamps, 02 nos LED Assembly. 350 Watts and 1 set Within Luminary Interconnection. Supply and installation of 2 nos. LED type single dome aviation obstruction light is also required with one high mast. This also includes Supply and installation of 1 no. outdoor stand mounted feeder pillar with 63A, 4 pole MCCB incomer, single dial time switch, 45A TP contactor for the automatic switching of luminaries, power tool control with 2 no 9A contactors and raise lower push button, Incoming 35 sq. mm and outgoing 16 & 2.5 sq. mm terminals. The Control Panel shall be of flame proof type suitable for gas group IIA/IIB.Construction of shallow foundation with M25 grade concrete for the highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth with all materials and labour. Lightning Finial shall be insulated from body and head frame of High Mast and a separate down conductor -1Rx1Cx35 sq mm Aluminium Flexible Cable- shall run from the lightning finial to an earthing bolt independent of the high Mast structure. Electrical accessories like plug & socket, power tool motor etc at the bottom of high mast shall be flame proof type suitable for gas group IIA/IIB. Electrical Accessories like plug & Socket, Power Tool etc at the bottom of high mast shall be of flame proof Type Suitable for Gas Group IIA/IIB. Refer technical specifications of high mast.
2
2590836
-
... More
CSW-DAHEJ-COMPOSITE-NON ITC
-
-
-
... More
A CIVIL
-
-
-
... More
Earth work in surface excavation (not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan) in all kinds of soil including getting out and disposal of excavated earth up to all lead and lift, as directed by the Engineer-in-Charge.
13361.4
1228521
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in widt h as well as 10 sqm on plan) including getting out and disposal of excavated earth, all works up to any lead and lift, as directed b y the Engineer-in-Charge :
-
-
-
... More
In all kinds of soil
2186.76
395056
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in d epth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5m.
1635
356766
-
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.
380.09
737444
-
... More
Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material :
-
-
-
... More
Beyond 30 cm girth upto and including 60 cm girth
10
3780
-
... More
Beyond 60 cm girth upto and including 120 cm girth
10
16832
-
... More
Beyond 120 cm girth upto and including 240 cm girth
5
39044
-
... More
Supplying chemical emulsion (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) in sealed containers including delivery as spec ified.
266
53073
-
... More
Diluting and injecting chemical emulsion (Chlorpyriphos/ Lindane E.C. 20% with 1% concentration) for POST-CONSTRUCTIONAL anti-termit e treatment (excluding the cost of chemical emulsion) :
-
-
-
... More
Along external wall where the apron is not provided using chemical emulsion @ 7.5 litres/ sqm of the vertical surface of the substru cture to a depth of 300 mm including excavation channel along the wall & rodding etc. complete :
273
7663
-
... More
"Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diamete r holes and plugging with cement mortar 1 : 2 (1 cement : 2 Coarse sand) to match the existing floor : "
442
99696
-
... More
Treatment of existing masonry using chemical emulsion @ 1 litre per hole at 300 mm interval including drilling holes at 45 degree an d plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole :
180
5677
-
... More
Filling the excavated earth to required grade, level & profile in low lying areas including watering, ramming, compacting at optimum moisture content to 90% of Proctor's density consolidation by rolling with 8 to 10 tonne power roller in layers not exceeding 20 c m thickness, including clearing the area by cutting of shrubs, bushes, grass, vegetation, debris etc. stacking and disposing out o f plot area to an unobjectional area as directed by Engineer-in-Charge complete in all respects inclusive of cost of all labour, ma te rials, tools, tackles etc. as per drawings, specifications and direction of the Engineer-in-Charge.
544
87975
-
... More
Supplying and filling selected earth/ moorum (excluding black cotton soil) from Contractor's own borrow areas including royalty, wit h all leads and lifts in low laying areas and filling to required grade and level including watering, compacting at optimum moistur e content to 90% of Proctor's density, consolidation and rolling with 8 to 10 tonne power roller in layers not exceeding 20 cm th ic kness, complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications a nd directions of the Engineer-in-Charge.
25057.84
10278811
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from n atural sources]
256
1726450
-
... More
1:3:6 [1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from n atural sources]
127.59
793326
-
... More
1:3:6 (1 cement : 3 coarse sand (Zone-III) derived from natural sources : 6 graded stone aggregate 40 mm nominal size derived from n atural sources)
124
754658
-
... More
1:4:8 [1 cement : 4 coarse sand (Zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from n atural sources]
257.72
1482258
-
... More
Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 [1 cement : 2 coarse sand (Zone-III) derived from natu ral sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources]
77
32042
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 Kg per square metre on dam p proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
77
8413
-
... More
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's sp ecification. [Note: Unit "KG" shall mean "PER KG PER 50 KG OF CEMENT"].
20
1123
-
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 [1 cement : 3 coarse sand derived from natural sources : 6 graded ston e aggregate 20 mm nominal size derived from natural sources] over 75 mm thick bed of dry brick ballast 40 mm nominal size, well ram m ed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth, e tc . complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and di rec tions of the Engineer-in-Charge.
131
79911
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishi ng and reinforcement - All work up to plinth level :
-
-
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
5
38337
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fille ts, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centerin g , shuttering, finishing and reinforcement, with :
-
-
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
5
46223
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 Degree landings, balconies, shelves, chajjas , lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the co s t of centering, shuttering, finishing and reinforcement, with :
-
-
-
... More
1:1.5:3 [1 cement : 1.5 coarse sand (Zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived fr om natural sources]
5
48497
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights :
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
1498.48
424034
-
... More
Suspended floors, roofs, landings, balconies and access platform
539
371098
-
... More
Shelves (Cast in situ)
10
6884
-
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
858
470541
-
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
442
322162
-
... More
Stairs, (excluding landings) except spiral-staircases
32
19784
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto pli nth level :
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more
74790.05
6204133
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above pl inth level :
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500 D or more
25011
2074762
-
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concr ete work, using coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design m i x, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, i nc luding admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability witho ut impairing strength and durability as per directions of the Engineer-in-Charge. [Note : Cement content considered in this item is @ 3 30 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.] :
-
-
-
... More
All works upto plinth level
156
1239370
-
... More
All works above plinth level upto floor V level
84
784476
-
... More
Extra for providing richer mixes at all floor levels. [Note: Excess/ less cement over the specified cement content used is payable/ recoverable separately] :
-
-
-
... More
Providing M-30 grade concrete instead of M-25 grade BMC/ RMC. [Note: Cement content considered in M-30 is @ 340 Kg/cum]
537.52
37244
-
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein. [Note: Unit "QN" shall me an "QUINTAL"]
53.75
35953
-
... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using coarse aggregate as well as fine aggregate derived from natural sources and cement content as per approved design mix, manufactured in fully automatic batc h ing plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mi x design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , ex cluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as pe r IS:9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direct ions of the Engineer-in-Charge. [Note : Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per des ign m ix is payable/ recoverable separately] :
-
-
-
... More
All works upto plinth level
215.52
1798136
-
... More
All works above plinth level upto floor V level
84
817968
-
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.
439
25683
-
... More
Supplying and providing non-shrinkable cement grout (SHRINKKOMP 20 or any other equivalent approved brand) for grouting holding down bolts in pocket holes for equipment foundation, including necessary surface preparation mixing of grout, curing as per manufacture r 's recommendation/ specification and directions of the Engineer-in-Charge. [Note: This item shall be operated under specific instr uc tions of the Engineer-in-Charge]
5726.45
367997
-
... More
Painting foundation concrete (RCC) with hot bitumen of grade VG-10 @ 17 Kg/10 sqm including cleaning the foundation concrete with br ushes etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
163.84
84228
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in :
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
255.67
1619483
-
... More
Brick work with common burnt clay F.P.S. (non-modular) bricks of class designation 7.5 in superstructure above plinth level up to fl oor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:4 (1 cement : 4 coarse sand)
222
1722250
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
-
-
-
... More
Cement mortar 1:3 (1 cement : 3 coarse sand)
257
203802
-
... More
Extra for providing and placing in position 2 Nos. 6 mm dia. M.S. bars at every third course of half brick masonry.
26
2068
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite (of any colour and s hade) for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour a n d texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with ma tc hing pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels :
-
-
-
... More
Area of slab up to 0.50 sqm
4
16758
-
... More
Area of slab over 0.50 sqm
17
67681
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar lo cation in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of c ut edges etc. complete.
6
4378
-
... More
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75 x 50 cm deep and 1.8 cm thick, fixed in ur inal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or w ith cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per directions of the Enginee r- in-Charge and finished smooth :
-
-
-
... More
Granite Stone of approved shade
1
3195
-
... More
Providing and fixing first quality ceramic glazed wall tiles conforming to IS:15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by the Engineer-in-Charge, i n skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey ce ment slurry @ 3.3 Kg/sq.m., including pointing in white cement mixed with pigment of matching shade complete.
73
74716
-
... More
Providing and laying Burnt Terracota Tiles 12 mm thick for facia, over walls, sloping RCC Roofs etc. at all levels and locations lai d over and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same colour as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specifications and d irections of the Engineer-in-Charge.
113
191220
-
... More
Providing and fixing 12 mm thick Elevational Brick Tiles for facia, vertical face of walls, etc. at all levels and locations laid ov er and including a backing coat of 15 mm thick cement mortar (1 cement : 3 sand) and joints filled with coloured cement of same col o ur as tiles complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specification and dire ct ions of the Engineer-in-Charge.
96
123279
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part I) non-decorative type, core of block board construc tion with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face ven e ers on both faces of shutters :
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
2
3748
-
... More
Supplying and fixing circular/ hexagonal M.S. Sheet ceiling fan box with clamp, 140 mm internal diameter, 73 mm height, 3 mm thick r im bottom, and top lid of 1.5 mm thick, M.S. sheet lids shall be screwed into the M.S. box by means of 3.0 mm diameter round headed screws, clamp shall be made of 12 mm diameter M.S. bar bent to shape as per standard drawings with over all length as 80 cm complet e in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of t he Engineer-in-Charge.
14
2395
-
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete :
-
-
-
... More
Stainless Steel (Grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.
22
20315
-
... More
Supplying, fabricating, erecting, placing and fixing in position M.S. structural works using rolled/ built up sections for truss, cl addings, bracings, purlins, supporting frames made of joists, tubes, pipes, channels, angles, plates, flats, bars etc. including cu t ting to required size welding of joints, fixing anchor plates, including bolts, theading, nuts, washers, sleeves etc. including p re paration of detailed fabrication drawings & submission to the Engineer-in-Charge for approval before start of fabrication, supply ing & applying painting with two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of "EPILUX 610" Primer of M/s BERGE R or any other approved equivalent make as per manufacturer’s recommendation, complete in all respects inclusive of cost of all lab our, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge. (Excluding the cost of conc rete work).
70.45
8155221
-
... More
Supplying & fixing welded wire mesh door made from steel wire fabric of rectangular mesh 75 x 25 mm size, weight not less than 7.75 Kg/sqm fixed on angle iron frame by welding, fixing of holdfast, hinges, door handles, tower bolts, aldrops (2 Nos.), painting wit h two coats of synthetic enamel paint of over a coat of red oxide zinc chrome primer, excluding frame etc. complete in all respects i nclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in- Cha rge. [Note: Angle iron frame shall be paid separately].
938
2297578
-
... More
Supplying and placing in position 5.0 mm thick steel chequered plates over cable ducts, valve pits etc. including provision for lift ing arrangements complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specific a tions and directions of the Engineer-in-Charge.
0.1
488
-
... More
Supplying & fixing Pigeon Protection net of mesh 15 mm x 15 mm & Gauge SW14 in sheds including specials required for bolting with ti e members of truss, painted with two coats of synthetic enamel paint of over a coat of red oxide zinc chrome primer complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Engin e er-in-Charge.
527
491051
-
... More
Supplying and laying flat brick soling in foundation trench, in floors, garages, sumps, etc., with bricks of class designation 50 la id to proper slope, level and grade etc. filling of the joints with sand etc. complete in all respects inclusive of cost of all lab o ur, materials, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
1808.83
1119759
-
... More
Providing and laying 52 mm thick cement concrete flooring with metallic hardner topping, under layer of 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer of 12 mm thick metallic concrete hardne r consisting of mix 1:2 (1 cement : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound such as I R ONITE NO. 1 of IRONITE CO. OF INDIA LTD. or aproved equivalent mixed in the ratio 4:1 (4 parts of cement : 1 part of metallic floo r hardening compound of approval quality) by weight, inclusive of cost of finishing, labour, material, equipment, etc. as per specif ic ations and directions of the Engineer-in-Charge.
709
694051
-
... More
Extra over item of IRONITE NO. 1 flooring for use of IRONITE NO. 3 (Metallic Dry Shade) in lieu of top layer of IRONITE NO.1
143
69686
-
... More
Providing and laying flamed finish Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) flooring in requir ed design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings wi t h 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cem en t slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc . a ll complete as specified and as directed by the Engineer-in-Charge.
9
22141
-
... More
Providing and laying Polished Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent) flooring in required de sign and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 1 8 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand), laid and jointed with cemen t slurry and pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing and polishing etc. al l complete as specified and as directed by the Engineer-in-Charge.
16
56054
-
... More
Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigmen t to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sa n d) :
107
162829
-
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cemen t: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and pol i shing complete.
11
19779
-
... More
Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of first quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including pointing the joints with white cement and ma t ching pigment, etc. complete.
20
18416
-
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the Manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 ce ment : 4 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joints with white cement and matching pigments etc., complete :
-
-
-
... More
Size of Tile 600x600 mm
85
126707
-
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to IS:15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of c ement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 Kg/sq.m. including grouting the joint with whit e cement & matching pigments etc. complete :
-
-
-
... More
Size of Tile 600x600 mm
11
16892
-
... More
Providing and fixing removable raised/ false access flooring with system (Unitile Solid Feel (USF) 800 or equivalent) and its compon ents of approved make for different plenum height with possible height adjustment up to 50 mm, comprising of modular load bearing f l oor panels supported on G.I. rectangular stinger frame work and G.I. Pedestal etc. all complete, as per the architectural drawings , as specified and as directed by Engineer-in-charge consisting of: (A) Providing at required spacing to form modular framework, ped es tals made out of G.I. tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100 mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75 mm x 75 mm x 3.5 mm welded with G.I. fully thread ed stud 16 mm outer diameter with two G.I. Check nuts screwed on the stud for level adjustment up to 50 mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the sub-floor (base) through base plate using epox y based adhesive of approved make or the machine screw with rawl plug. (B) Stringers system in all steel construction hot dippe d gal vanized of rectangular size 570x20x30x0.80 mm thick having holes at both ends for securing the stringers on to the pedestal he ad usi ng fully threaded screws ensuring maximum lateral stability in all directions, the grid formed by the pedestal and stringer a ssembly shall receive the floor panel, this system shall provide adequate solid, rigid support for access floor panel. The system s hall pro vide a minimum clear uninterrupted clearance between the bottom of the floor for electrical conduits and wiring etc. all co mplete as per the architectural drawings, as specified and as directed by the Engineer-in-Charge. (C) Providing and fixing Access F loor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor pan el shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and botto m plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange) . The panel should be corrosion resistant epoxy coated for lifetime rust protection and cavity formed by the top and bo ttom plate is filled with Pyrogrip non-combustible Portland cementitious core mixed with lightweight foaming compound. The access f loor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology up to 1 mm thickness for superior ad hesion and Sur face flatness within 0.75 mm.The panel is to withstand a Concentrated Load of 363 Kg applied on area 25 mm x 25 mm wi thout collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed L oad (UDL) minim um 1250 Kg/sq.m. and, an impact load of 50 Kg all complete as per the approved manufacturers specification and as pe r the direction of the Engineer-in-Charge. All specification must be printed on the side of the panel to ensure the quality of the p roduct :
-
-
-
... More
450 mm Finished Floor Height (FFH)
4
21316
-
... More
Providing and fixing 2 mm thick P.V.C. (BHOR or equivalent make) sheet/ tile flooring on a smooth and damp proof base using rubber b ased adhesives including rolling with light wooden roller weighing about 5 Kg, all complete including cost of preparation of subgr a de, damp proof course consisting of 30 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5 mm n ominal size) as directed by the Engineer-in-Charge.
109
167289
-
... More
Providing and laying 10 mm thick white ceramic tiles over 15 mm layer of cement mortar 1:3 (1 cement : 3 fine sand) mixed with water proofing compound finished neat etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles, etc. as p er drawings, specifications and directions of the Engineer-in-Charge.
230
366300
-
... More
Providing gola 75x75 mm (in 75x75 mm deep chase) in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and do wn gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design.
148
34882
-
... More
Making Khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggr egate of 20 mm nominal size) over P.V.C. sheet 1 m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse s and) and a coat of neat cement, rounding the edges and making and finishing the outlet complete.
18
4364
-
... More
Providing and fixing on wall face Unplasticised Rigid PVC (uPVC) rainwater pipes (110 mm diameter, single socketed) conforming to IS :13592 Type-A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion.
130
39394
-
... More
Providing and fixing on wall face Unplasticised-PVC (UPVC) moulded fittings/ accessories for Un-plasticised Rigid PVC rainwater pipe s conforming to IS:13592 Type A, including jointing with seal ring conforming to IS:5382, leaving 10 mm gap for thermal expansion :
-
-
-
... More
Coupler (110 mm)
26
3042
-
... More
Single Push-fit Coupler (110 mm)
26
2801
-
... More
Bend- 87.5 Degrees (110 mm)
18
2321
-
... More
Shoe - Plain (110 mm)
18
2034
-
... More
Providing and fixing Unplasticised PVC (uPVC) pipe clips (110 mm) of approved design to unplasticised-PVC rainwater pipes by means o f 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement morta r 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
24
6885
-
... More
Designing, providing, fabricating and fixing profiled sheeting 730-1020 mm cover width, 28-30 mm crests @ 186-333 mm centre to centr e, manufactured out of 0.45 mm BMT (Base Metal Thickness) Hi-Tensile Steel (Minimum yield strength of 550 MPa) coated with hot dip m etalic galvalume/ zincalume coating AZ-150 or equivalent as per AS:1397 and super polyster XRW quality paint coat as per AS/ NZS27 28 (Category-3) of approved colour for roofing, cladding, gutters, rainwater pipes, spouts etc. The total mass of the coating on bo th sides shall be 150 gms/sqm (Zinc 45%/ Aluminium 55%). The total paint coat thickness shall be 35 microns, comprising of 20 micron s e xterior coat of super polyster XRW on top surface and 5 micron super polyester on back surface over 5 micron primer coats on bot h su rfaces including side and end laps. The sheets shall have wide pans with 2-3 stiffening ribs for effective water shedding and s pecia l male/ female ends with full return legs on side laps for purlins support and anti-capilary flute in side lap. The sheets sha ll be fixed using polymer coated hot dip galvanised hex head self drilling fasteners as per AS:3566 (Class-3) on each crest of sheet s for connection with purlins and polymer coated hot dipped stitching fasteners at 300 mm c/c on all sides and end laps, etc. Approv ed sea ling tapes shall be used on side laps and end laps of sheets and closer to be provided at the last end of sheet. The measurem ent sha ll be based on per unit of finished/ laid area. Item to include curved sheets also wherever required. The Contractor shall g ive mini mum 10 year guarantee for the sheets against deterioration, disintegration, loss of lustre, variation in colour, etc. and l eakages a cross laps, fasteners etc. The Contractor is to submit design and shop drawing for approval on the sheet profile, design a nd details before installation :
-
-
-
... More
Roof, side cladding, gable end cladding, gutters, rainwater pipes/ spouts etc. [Note: The area of sheet coverings shall be measured on the flat surface i.e. without allowance for laps and ribs].
1137
1568467
-
... More
Providing, supplying, erecting and fixing in position 3 mm thick polycarbonate sheets of approved texture and colour for roof lighti ng. Sheets to be profiled to match metal sheets described in respective item above. Cost to include jointing, sealing with Butyl ad h esives and tapes as per manufacturers specifications and all labour, tools, plants, temporary works, etc. all complete.
45
115718
-
... More
Supplying, erecting and fixing in position 600 mm wide Colour Bond Ridge Cap and corner flushing rolled from 0.5 mm TCT BHP Zincalum e AZ-150 High Tensile Steel (550 MPa Yield Strength) including fixing to sheets stiched by (4.8 mm x 16 mm) Hex Head stitch screws, with metal bonded EPDM washers all complete as per specifications and directtions of the Engineer-in-Charge.
53
61192
-
... More
Providing and fixing factory formed rainwater gutters (as per AS-2179) made of the same material used for roofing i.e. 0.45 mm BMT ( Base Metal Thickness) Hi-Tensile Steel with minimum 550 MPa Yield Strength coated with hot dip metallic zinc-aluminium alloy coatin g "ZINCALUM AZ-150" or equivalent (as per AS:1397), with super polyester Colorbond XRW quality paint coat as per AS/ NZS:2728 (Cate go ry-3) of approved colour, having girth as per design complete in all respect with all necessary supporting straps, joining materi al, bolts, nuts, washers, sealing material, including cutting holes, making drop ends, funnels etc. or as directed by the Engineer- in-C harge. [Note: Measurement shall be done on as laid length].
29
33731
-
... More
Providing and fixing LUXALON 75C & 225C un-perforated Aluminium panel coloured ceiling manufactured by M/s. HUNTER DOUGLAS INDIA or any other approved equivalent brand, each panel consisting of 75/225 mm wide x 15.5 mm deep and 0.5 mm thick with bevel edged panel made from enamelled corrosion resistance aluminium alloy AA-5050 (Al.Mg), each panel to abut each other with a narrow 'V' groove, cl ipping with a baked enamelled aluminium panel carrier of 32 mm wide x 39 mm deep x 0.95 mm thick in standard length of 5 metres mad e of double baked enamelled aluminium alloy AA-5050 (Al.Mg) black with cutouts to hold the panels in a module of 75 mm closed at a di stance of 1.25 metre, each panel carrier suspended by means of G.I. suspension rod 4 mm diameter and a galvanised supsension spri ng clip at a distance of 1.7 metre centre to centre, making openings for light fittings etc. with suitable peimeter framing all comp let e as per manufacturer's recommendation and directions of the Engineer-in-Charge. [Note: Measurement shall be made wall to wall w itho ut any deduction for openings, for payment purpose].
238
1388206
-
... More
Extra over above item for providing perforated panels with non-woven tissue glued to panels.
238
746360
-
... More
15 mm cement plaster on the rough side of single or half brick wall of mix :
-
-
-
... More
1:6 (1 cement : 6 fine sand)
1113.5
323949
-
... More
15 mm cement plaster on rough side of single or half brick wall of mix :
-
-
-
... More
1:6 (1 cement : 6 coarse sand)
1619.49
488928
-
... More
6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
1106.2
249837
-
... More
Neat cement punning.
0.5
31
-
... More
Providing & fixing galvanized chicken wire net 20 Gauge, 20 mm mesh size in plastering work at the junction of RCC Columns/ Beams & brickwork as directed by the Engineer-in-Charge.
459
97827
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
-
-
-
... More
Water thinnable cement primer
1869
111395
-
... More
Finishing walls with textured exterior paint of required shade :
-
-
-
... More
New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm
2295
528946
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
70
8452
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wa ll surface to prepare the surface even and smooth complete.
1869
213793
-
... More
Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 gra ms/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour :
-
-
-
... More
Two coats
1869
211477
-
... More
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, blac k finished reinforced with non-woven polyester matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25°C, 0.87-0.89 kg/ litre and viscocity 70-160 cps. Over the primer coat the layer of m e mbrane shall be laid using Butane Torch and sealing all joints etc, and preparing the surface complete. The vital physical and che mi cal parameters of the membrane shall be as under : (a) Joint strength in longitudinal and transverse direction at 23°C as 650/450 N/5 cm. (b) Tear strength in longitudinal and transverse direction as 300/250N. (c) Softening point of membrane not less than 150°C. (d) Cold flexibility shall be up to -2°C when tested in accordance with ASTM, D-5147. The laying of membrane shall be got done thr ough the authorised applicator of the manufacturer of membrane.
415
220560
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obt a ined. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operations] :
-
-
-
... More
Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
20
34520
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior t o dismantling operations. (3) Cutting of all reinforcement shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge]
20
50360
-
... More
Demolishing brick work in cement mortar manually or by mechanical means including stacking of serviceable material and disposal of u nserviceable material within 50 metres lead as per the directions of Engineer-in-Charge. [Notes: (1) Dismantling shall be allowed d u ring day shift only & prior permission for the same shall be obtained. (2) Providing of necessary covers/ barricades around the wo rk area shall be done prior to dismantling operations]
20
29204
-
... More
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge. [Notes: (1) Dismantling shall be allowed during day shift only & prior permission for the sam e shall be obtained. (2) Providing of necessary covers/ barricades around the work area shall be done prior to dismantling operatio ns . (3) Cutting of steel shall be done using hack saw or chiesel or any other method as approved by the Engineer-in-Charge.]
500
1368
-
... More
Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilo metre, as per the directions of Engineer-in-Charge.
50
15956
-
... More
Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste materials by mechanical means, including loading, tr ansporting, unloading to approved municipal dumping ground or as approved by the Engineer-in-Charge, beyond 50 m initial lead, for a ll leads including all lifts involved.
110
15173
-
... More
Preparation and consolidation of sub-grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the s ub grade and disposal of surplus earth with lead up to 50 metres.
4800
747478
-
... More
Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including prepari ng the surface & cleaning with mechanical broom :
-
-
-
... More
With medium setting bitumen emulsion :
-
-
-
... More
On W.B.M/ W.M.M. @ 0.4 Kg/sqm
4800
79409
-
... More
Providing and laying seal coat over prepared surface of road with bitumen heated in bitumen boiler fitted with the spray set sprayin g using 98 kg of bitumen of grade VG-10 and blinding surface with 0.90 cum of stone aggregate of 6.7 mm size (Passing 11.2 mm sieve and retained on 2.36 mm sieve) per 100 sqm of road surface, including rolling and finishing with power road roller all complete. [N o te: This item to be operated only with the prior approval of the Engineer-in-Charge].
4800
472774
-
... More
Providing and fixing in position pre-moulded joint filler in expansion joints. [Note: Unit "CM" shall mean "PER CENTIMETRE DEPTH PER CENTIMETRE WIDTH PER METRE LENGTH"].
576
1773
-
... More
Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS :164, on bituminous surface in white/ yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign mat e rial etc. complete :
-
-
-
... More
New work (Two or more coats)
288
61786
-
... More
Supplying and fixing Road Hump of minimum size 350 mm width x 50 mm thick made of Carbon Black mixed Rubber with Additive of LDPE fo r reinforcement & UV resistant colouring agent of black & yellow colour with 4 reflective glass beads, of weight not less than 16 K g /metre, and capacity to withstand minimum 35 tonne weight (moving vehicle load) including cleaning the road surface of all dirt, s ca les, oil, grease and foreign material etc. and fixing the hump on the Road top as per manufactures specifications with necessary fas teners complete in all respects inclusive of cost of all labour, materials, fasteners, tools, tackles etc. as per specification and directions of the Engineer-in-Charge.
96
243267
-
... More
Providing and laying Dense Graded Bituminous Macadam using crushed stone aggregates of specified grading, premixed with bituminous b inder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to th e required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achiev e the desired compaction and density, complete as per specificatons and directions of the Engineer-in-Charge :
-
-
-
... More
50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% ( percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity.
360
3599296
-
... More
Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thicknes s with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per s pecifications and directions of the Engineer-in-Charge :
-
-
-
... More
With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
720
1800820
-
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm) to wet mix macadam (WMM) specifica tion including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfin i sher in sub-base/ base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve t he desired density, complete as per specifications and directions of the Engineer-in-Charge.
1200
3148830
-
... More
Providing and laying factory made chamfered edge interlocking Cement Concrete paver blocks in foot path, park & lawns driveway or li ght & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in re q uired colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver b locks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specificatio ns & directions of the Engineer-in-Charge :
-
-
-
... More
60mm thick Cement Concrete paver block of M-35 grade with approved colour, design & pattern.
5340
4693448
-
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (th i ckness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete e tc . as per directions of the Engineer-in-Charge. [Notes: (1) Length of finished kerb edging shall be measured for payment. (2) Prec ast C.C. kerb stones shall be approved by the Engineer-in-Charge.]
130
1081736
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type) (Ref. Make: HINDWARE, Model: Cat No.-20058 or e quivalent approved) with seat and lid, 10 litre low level white vitreous china dual flushing cistern (Ref. Make: HINDWARE, Model: C a t No.-21028 or equivalent approved) & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with s pe cials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brac ket s, cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
3
19923
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I cl amps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
... More
One urinal basin with 5 litre white P.V.C. automatic flushing cistern
1
4949
-
... More
Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern
1
7627
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includ ing painting of fittings and brackets, cutting and making good the walls wherever require :
-
-
-
... More
White Vitreous China Wash basin size 550x400 mm (Ref. Make: HINDWARE, Model: Cat No.-10010 or equivalent approved) with a pair of 15 mm C.P. brass pillar taps
3
8484
-
... More
Providing and fixing 8 mm dia C.P./ S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by the Engineer-in-Charge.
2
591
-
... More
Providing and fixing C.P. Brass 32 mm size Bottle Trap of approved quality & make and as per directions of the Engineer-in-Charge.
5
4386
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete :
-
-
-
... More
Semi Rigid Pipe :
-
-
-
... More
32 mm diameter
5
435
-
... More
Flexible Pipe :
-
-
-
... More
32 mm diameter
1
100
-
... More
Providing and fixing 100 mm sand cast Iron grating for gully trap.
8
354
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board grou nd fixed to wooden cleats with C.P. brass screws and washers complete.
1
1274
-
... More
Providing and fixing toilet paper holder :
-
-
-
... More
C.P. Brass (Ref. Make: JAQUAR, Model: Cat. No.-1151 or approved equivalent).
3
1739
-
... More
Providing and fixing soil, waste and vent pipes :
-
-
-
... More
100 mm diameter :
-
-
-
... More
Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS:3989
32
34720
-
... More
Providing and fixing plain bend of required degree :
-
-
-
... More
100 mm diameter :
-
-
-
... More
Sand Cast Iron S&S as per IS:3989
9
3493
-
... More
Providing and fixing double equal plain junction of required degree :
-
-
-
... More
100x100x100x100 mm :
-
-
-
... More
Sand Cast Iron S&S as per IS:3989
3
2580
-
... More
Providing and fixing single equal plain junction of required degree :
-
-
-
... More
100x100x100x100 mm :
-
-
-
... More
Sand Cast Iron S&S as per IS:3989
3
1989
-
... More
Providing and fixing collar :
-
-
-
... More
100 mm :
-
-
-
... More
Sand Cast Iron S&S as per IS:3989
3
1220
-
... More
Providing and fixing shielded coupling for Hubless centrifugally cast iron pipe :
-
-
-
... More
100 mm diameter :
-
-
-
... More
SS-304 grade coupling with EPDM rubber
12
4817
-
... More
Providing and fixing M.S. stays and clamps for sand cast iron/ centrifugally cast (spun) iron pipes of diameter :
-
-
-
... More
100 mm
15
1885
-
... More
Painting sand cast iron/ centrifugally cast (spun) iron soil, waste vent pipes and fittings with two coats of synthetic enamel paint of any colour such as chocolate grey, or buff etc. over a coat of primer (of approved quality) for new work :
-
-
-
... More
100 mm diameter pipe
29
1849
-
... More
Providing and fixing glazed vitreous China Oval wash basin of 560x410 mm size (Ref. Make: HINDWARE, Model: Cat No.-10017 or equivale nt approved) with M.S. or C.I. brackets painted white, C.P. brass chain with rubber plug, 32mm C.P. brass waste coupling of standar d pattern, 32mm C.P. brass bottle trap and union, 32mm diameter C.P. pipes to wall flange etc. including cutting and making good th e walls & floors wherever required, etc. complete in all respects inclusive of cost of all required fittings, fixtures, materials, l ab our, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge :
-
-
-
... More
White Colour
3
20313
-
... More
Providing and fixing the following washroom fittings, complete in all respects; inclusive of cost of all materials, labour, tools, t ackles etc. as per specifications and directions of the Engineer-in-Charge :
-
-
-
... More
Stainless steel liquid soap container (spring loaded push type) with lid and brackets fixed to P.V.C. cleats with C.P. brass screws, etc.
6
11978
-
... More
C.P. brass double coat hook (Ref. Make: JAQUAR, Model: Cat. No. 1161 or approved equivalent).
1
1017
-
... More
Providing and fixing approved quality C.P. brass Towel Rail of 20mm diameter & 600mm long including C.P. brass brackets fixed with w ooden cleats and C.P. brass screws etc. complete.
2
2574
-
... More
Providing and fixing C.P. brass Towel Ring 300mm diameter, fixed to P.V.C. cleats with C.P. brass screws, etc. complete.
2
2673
-
... More
Providing & fixing 6mm thick, copper back finish, looking mirror of required size, made of float sheet glass of best quality & appro ved make, over 12mm thick marine board fixed to rawl plug with round head screws & washers including teakwood beading with melamine polish all around, complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications a n d directions of the Engineer-in-Charge.
4
10444
-
... More
Internal Work - Exposed on wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. Th is includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per directions of the E ngineer-in-Charge :
-
-
-
... More
20 mm nominal outer dia pipes
15
4573
-
... More
Internal Work - Concealed in wall: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for ho t & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This i ncludes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same inc lu ding testing of joints complete as per directions of the Engineer-in-Charge :
-
-
-
... More
15 mm nominal dia pipes
21
8546
-
... More
20 mm nominal dia pipes
29
13775
-
... More
External Work: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water suppl y including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, t renching, refilling & testing of joints complete as per directions of the Engineer-in-Charge :
-
-
-
... More
20 mm nominal dia pipes
22
5544
-
... More
32 mm nominal dia pipes
11
4520
-
... More
40 mm nominal dia pipes
112
59720
-
... More
50 mm nominal dia pipes
125
98305
-
... More
80 mm nominal dia pipes
965
1884571
-
... More
100 mm nominal dia pipes
90
248514
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
... More
20 mm nominal bore
2
914
-
... More
25 mm nominal bore
1
493
-
... More
50 mm nominal bore
2
1726
-
... More
Providing and fixing ball valve (brass) of approved quality, high or low pressure, with plastic floats complete :
-
-
-
... More
20 mm nominal bore
7
2686
-
... More
Providing and fixing gun metal non-return valve of approved quality (screwed end) :
-
-
-
... More
40 mm nominal bore :
-
-
-
... More
Horizontal
1
787
-
... More
Providing and fixing Un-plasticised PVC (UPVC) connection pipe with brass unions :
-
-
-
... More
45 cm length :
-
-
-
... More
20 mm nominal bore
16
1595
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS-8931 :
-
-
-
... More
15 mm nominal bore
2
1057
-
... More
Providing and fixing 15mm diameter C.P. brass tap as per following with C.P. brass flange including cutting & making good the walls wherever required, etc. complete in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specificatio ns and directions of the Engineer-in-Charge :
-
-
-
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0021 or approved equivelent)
7
10166
-
... More
Bib Cock (Ref. Make: JAQUAR, Model: Cat. No. 0037 or approved equivelent)
1
1518
-
... More
Providing and fixing 15mm diameter C.P. brass angle valve as per following with C.P. copper connecting pipe 375mm long or as require d including nuts, washers, C.P. brass flange, etc. including cutting & making good the walls wherever required, etc. complete in al l respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in- Ch arge :
-
-
-
... More
Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 0053 or approved equivalent)
1
1500
-
... More
Providing and fixing 15mm diameter C.P. brass stop cock with wall flange (Ref. Make: JAQUAR, Model: Cat. No. 0933 or approved equiva lent), male end with C.P. copper connecting pipe 375mm long or as required including nuts, washers, C.P. brass flange etc. includin g cutting & making good the walls wherever required complete in all respects inclusive of cost of all materials, labour, tools, tac kl es etc. as per specifications and directions of the Engineer-in-Charge.
1
1552
-
... More
Providing & fixing Angle Valve (Ref. Make: JAQUAR, Model: Cat. No. 563 or approved equivalent) and Health Faucet with flexible tube 8mm diameter x 1.5 m long (Ref. Make: JAQUAR, Model: Cat. No. 549 or approved equivalent).
1
2786
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank (Ref. Make: SINTEX or approved equivalent), I S:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but wit h out fittings and the base support for tank.
2500
21859
-
... More
Providing, laying and jointing glazed stoneware pipes Class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cem ent : 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
150 mm diameter
70
34783
-
... More
Providing and fixing square mouth S.W. gully trap class SP-1 complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside dimension). The brick masonary chamber shall be constructed with common burnt clay F.P . S. (Non-modular) bricks of class designation 7.5. [Note: Weight of the cover shall not less than 4.50 kg and weight of the frame s ha ll not be less than 2.70 kg as per standard design] :
-
-
-
... More
100x100 mm size P-type
4
9167
-
... More
Providing and laying Non Pressure NP-4 class (Heavy duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of cemen t mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
450 mm dia R.C.C. pipes
48
125933
-
... More
600 mm dia R.C.C. pipes
48
162412
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with ce m ent mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement and making necessary channels for the drai n etc. complete :
-
-
-
... More
For pipes 250 to 300 mm diameter
2
1425
-
... More
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with common burnt clay F.P.S. (Non-modular) bri cks of class designation 7.5 in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 Kg and weight of frame 15 Kg), R.C.C. to p slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cem en t : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
... More
Inside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets :
1
6833
-
... More
Extra for depth beyond 45 cm of brick masonry chamber :
-
-
-
... More
For 500x700 mm size chamber
1
5648
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diam eter, 1.8 m long complete as per standard design :
-
-
-
... More
With common burnt clay F.P.S. (Non-modular) bricks of class designation 7.5
2
50224
-
... More
Constructing brick masonry Septic Tank with brickwork in cement mortar 1:6 including R.C.C. 1:2:4 (1 cement : 2 sand : 4 graded coar se aggregate) top slab, C.I. cover all as per standard drawing, etc. complete in all respects inclusive of cost of all materials, l a bour, tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge :
-
-
-
... More
For 30 Users
1
137733
-
... More
For 10 Users
1
121205
-
... More
Constructing percolation pit of size 3.0m diameter and 2.0m deep, filled with 40 mm size brick ballast including providing suitable pre-cast RCC covers with lifting lugs, laying of 150mm diameter x 5.0m long U.P.V.C. pipe embedded in pit/ outlet pipe all complete as per specification and directions of the Engineer-in-Charge.
2
154971
-
... More
Providing and fixing self cleaning S.C.I. heavy quality Floor/ Nahani trap with 100mm diameter inlet and 100mm diameter outlet, 125m m C.P. brass grating (heavy type) with or without vent arm including cost of cutting and making good the walls and floors, jointing with lead caulked joints, connecting with waste water pipe etc. complete in all respects inclusive of cost of all materials, labour , tools, tackles etc. as per drawings, specifications and directions of the Engineer-in-Charge.
6
9330
-
... More
Providing and fixing 32mm diameter (Nominal Bore) brass ball valve of approved quality complete with high pressure copper floats, co mplete in all respects inclusive of cost of all materials, labour, tools, tackles, etc. complete as per specifications and directio n s of the Engineer-in-Charge.
1
5721
-
... More
Construction of second class brick masonary open surface drain (Size: 200mm wide & 200mm average depth) in cement mortar 1:4 laid ov er a bed of 150mm thick cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including ma k ing haunches and providing 15mm thick cement plaster in CM 1:4 (1 cement : 4 coarse sand) with a floating coat of neat cement insi de and its top and exposed surfaces, including excavatioin, disposal of the surplus earth up to any lead and lift as per standard d esi gn and drawing, complete in all respects inclusive of cost of all labour, materials, carriages, excavation and refilling, curing etc ., as per specifications and directions of the Engineer-in-Charge.
341
617584
-
... More
Constructing Brick Masonary catch pit in cement mortar 1:4 (1 cement : 4 coarse sand) including necessary excavation, 200mm thick fo undation concrete 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm size) and inside and top plastering (15mm thi c k) with cement mortar 1:4 (1 cement : 4 coarse sand) finished with a floating coat of neat cement making necessary connections to dr ains inclusive of all labour, material, equipment, etc., all complete as per drawing, specifications and directions of the Engin eer -in-Charge :
-
-
-
... More
600mm x 600mm x depth up to 750mm inner dimensions
4
47951
-
... More
Vertical load testing of piles in accordance with IS:2911 (Part-IV) including installation of loading platform by Kentledge/ Anchor piles method and preparation of pile head or construction of test cap and dismantling of test cap after test etc. complete as per sp ecification & the direction of the Engineer-In-Charge. [Notes : (1) Initial and Routine Load Test shall not be carried out by Dynam i c method of testing. (2) Testing agency shall submitt the design of loading platform for the approval of the Engineer-in-Charge.] :
-
-
-
... More
Single pile up to 50 tonne Safe Capacity :
-
-
-
... More
Routine Test (Test Load 1.5 times the Safe Capacity) [Note: Unit "EA" shall mean "PER TEST"]
4
79748
-
... More
Lateral load testing of single pile in accordance with IS Code of practice IS:2911 (Part-IV) for determining safe allowable lateral load on pile :
-
-
-
... More
Up to 50 tonne capacity pile. [Note: Unit "EA" shall mean "PER TEST"]
2
39874
-
... More
Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accordance with IS:14893 including surfa ce preparation of pile top by removing soil, mud, dust & chipping lean concrete lumps etc. and use of computerised equipment and hi g h skill trained personal for conducting the test & submission of results, all complete as per directions of the Engineer-in-Charge . [Note: Unit "EA" shall mean "PER TEST"]
113
105398
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of require d dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neop re ne gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required includi ng cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectura l d rawings and the directions of the Engineer-in-Charge. [Note: Glazing, paneling and dash fasteners to be paid for separately] :
-
-
-
... More
For fixed portion :
-
-
-
... More
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
657
297816
-
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittin gs wherever required including the cost of EPDM rubber/ neoprene gasket required. [Note: Fittings shall be paid for separately] :
-
-
-
... More
Powder coated aluminium (Minimum thickness of powder coating 50 micron)
449
243696
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/ neoprene gasket et c. complete as per the architectural drawings and directions of the Engineer-in-Charge. [Note: Cost of aluminium snap beading shall be paid in basic item] :
-
-
-
... More
With float glass panes of 5.50 mm thickness
92
118483
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS:6315, having brand logo embossed on the body/ plate with double spring mechanism and door weight up to 125 Kg, for doors, including cost of cutting floors , embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass piv ot and single piece M.S. sheet outer box with slide plate etc. complete as per directions of the Engineer-in-Charge. :
-
-
-
... More
With stainless steel cover plate minimum 1.25 mm thickness
15
35949
-
... More
Providing and fixing stainless steel (SS 304 Grade) adjustable friction windows stays of approved quality with necessary stainless s teel screws etc. to the side hung windows as per directions of the Engineer-in-Charge complete :
-
-
-
... More
205 X 19 mm
12
3048
-
... More
Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 2100 mm long with SS screws etc .complete as per d irections of the Engineer-in-Charge :
-
-
-
... More
Powder coated (Minimum thickness 50 micron) aluminium tubular handle bar
22
12295
-
... More
Providing and fixing brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for al uminium doors including necessary cutting and making good etc. complete.
12
5466
-
... More
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complet e :
-
-
-
... More
Powder coated (Minimum thickness 50 micron) Aluminium
20
1421
-
... More
Providing and fixing aluminium round shape handle of outer diameter 100 mm with SS screws etc. complete as per directions of the Eng ineer-in-Charge :
-
-
-
... More
Powder coated (Minimum thickness 50 micron) Aluminium
28
2325
-
... More
Filling the gap in between Aluminium/ Stone/ Wood frame and adjacent RCC/ Brick/ Stone/ Wood/ Ceramic/ Gypsum work by providing weat her/ structural non-sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and directions of t he Engineer-in-Charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600 :
-
-
-
... More
Up to 5 mm depth and 5 mm width
209
25974
-
... More
Providing and fixing, on fixed glazing/ doors/ window panes, sun control film "HP NATURAL 35 SAFETY COMBINATION FILM-4Mil" of M/s. G ARWARE or approved equivalent make and shade, all complete as per manufacturer's specification and as per directions of the Enginee r -in-Charge.
33
32869
-
... More
Supplying and using water proofing compound like CICO, PUDDLE or any other approved brand with Cement Plaster/ CC/ RCC complete in a ll respects inclusive of cost of all labour, materials, tools, tackles etc. as per drawings, specifications and directions of the E n gineer-in-Charge.
205
25689
-
... More
Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS:2800 (Part-I), including c ollecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all e q uipment, tools, plants & machineries required for the job, all complete as per directions of the Engineer-in-Charge, up to 90 metr e depth below ground level :
-
-
-
... More
All types of soil :
-
-
-
... More
300 mm diameter
70
35625
-
... More
Rocky strata including boulders :
-
-
-
... More
300 mm diameter
20
24303
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, Un-plasticized PVC medium well casing (CM) pipe of req uired dia, conforming to IS:12818, including required hire and labour charges, fittings & accessories etc. all complete, for all de p ths, as per directions of the Engineer-in-Charge :
-
-
-
... More
150 mm nominal size diameter
70
48034
-
... More
Supplying, assembling, lowering and fixing in vertical position in bore well Un-plasticized P.V.C. medium well screen (RMS) pipes wi th ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per d irections of the Engineer-in-Charge :
-
-
-
... More
150 mm nominal size diameter
20
14824
-
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
1
1317
-
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulde rs, in required thickness, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
1
1317
-
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per directions of the Engineer-in-Charge.
1
1317
-
... More
Gravel packing in tubewell construction in accordance with IS:4097, including providing gravel fine/ medium/ coarse, in required gra ding & sizes as per actual requirement, all complete as per directions of the Engineer-in-Charge.
3
4463
-
... More
Development of tube well in accordance with IS:2800 (Part-I) and IS:11189, to establish maximum rate of usable water yield without s and content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well i s fully developed, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc . by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, al l complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and directions of th e Engineer-in-Charge. [Note: Unit "H" shall mean "PER HOUR"].
30
25558
-
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, remova ble as per requirement, all complete for borewell of :
-
-
-
... More
150 mm diameter
1
209
-
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS:2800 (Part-I), including ne cessary bolts & nuts of required size complete. :
-
-
-
... More
150 mm clamp
1
1479
-
... More
Providing and fixing Bail plug/ Bottom plug of required diameter to the bottom of pipe assembly of tubewell as per IS:2800 (Part-I) :
-
-
-
... More
100 mm diameter
1
225
-
... More
150 mm diameter
1
279
-
... More
Construction of open surface drain complete as per drawing including necessary excavation, refilling, disposal of surplus earth, pro viding and laying one layer of flat brick and cement concrete 1:3:6 (150 mm thick) at bottom, lining with brick masonry in cement m o rtar 1:4 (1 cement : 4 coarse sand), plastering exposed surface with 18 mm thick cement mortar 1:4 1:4 (1 cement : 4 coarse sand) wi th a floating coat of neat cement, rounding off corners etc. complete as per specification, drawing and directions of the Enginee r-i n-Charge :
-
-
-
... More
450 mm x 450 mm rectangular section radial drain.
1920
4850989
-
... More
Providing and filling bituminastic compound in 50mm thick x 150mm deep grooves around foundations, in floors, pavements and expansio n joints, etc. complete as per directions of the Engineer-in-Charge.
0.1
71
-
... More
Providing and making Construction/ Contraction joint by mechanically cutting 12mm x 25mm deep groove and filling with bituminous sea ling compound including cleaning etc. complete as per drawing, specifications and directions of the Engineer-in-Charge.
231
123456
-
... More
Providing and fixing 75mm diameter P.V.C. pipe (4 Kg/sq.cm) for Weep Holes in Masonry/ RCC wall including providing 230x230x230 mm s ize (approx.) filter using pebles of 40mm & down size in every weep hole on retaining side etc. complete in all respects inclusive o f cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engineer-in-Charge.
62
16999
-
... More
Supply, installation, testing & commissioning of Turbo Roof Air Ventilators of Fan Size- 24 inch (neck/ throat dia.), Ventilator Dia meter- 30 inch, Ventilator Base (FRP)- standard width 1.8m x dome height 750mm, Opening for ventilation dome- 860mm x 680mm x 608mm , thickness 2mm etc. complete in all respects and as per specifications and directions of the Engineer-in-Charge.
18
178634
-
... More
Supplying and stacking of good earth at site including royalty and carriage up to any lead complete. [Note: Volume of earth measured in stacks will be reduced by 20% for payment].
450
245598
-
... More
Supplying and stacking sludge at site including royalty and carriage up to any lead complete. [Note: Volume of sludge measured in st acks will be reduced by 8% for payment].
150
48283
-
... More
Supplying and stacking of well decayed cattle manure at site including royalty and carriage up to any lead complete. [Note: Volume o f cattle manure measured in stacks will reduced by 8% for payment].
150
40182
-
... More
Mixing earth and sludge or manure in the required proportion specified or directed by the Engineer-In-Charge.
750
27992
-
... More
Spreading of sludge, dump manure and/or good earth in required thickness including removal of debris/ un-wanted material, consolidat ion, dressing, levelling and watering etc. complete as per directions of the Engineer-in-Charge. [Note: Cost of sludge, dump manure and/or good earth shall be paid separately under relevant item of SOR].
750
40240
-
... More
Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surp lus soil, by spreading and neatly levelling within a lead of 50 m and making up the trenched area to proper levels by filling with e arth or earth mixed with sludge or/ and manure before and after flooding trench with water. [Note: The rate is excluding cost of i mp orted earth, sludge or manure].
75
5989
-
... More
Rough dressing the trenched ground including breaking clods.
1500
2265
-
... More
Flooding the ground with water including making kiaries and dismantling the same.
1500
3309
-
... More
Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation.
1500
7504
-
... More
Fine dressing of the ground
1500
5664
-
... More
Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20% : one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filli n g with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared u nserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete. [Note: Co st of sludge, manure or extra earth shall be paid for separately under relevant item of SOR].
150
34159
-
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by vo lume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) floodin g with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts. [Note: Cost of manure, slu dg e or extra good earth if needed shall be paid separately under relevant item of SOR].
-
-
-
... More
Holes 1.2 m diameter and 1.2 m deep
150
53243
-
... More
Holes 60 cm diameter and 60 cm deep
150
6964
-
... More
Providing and laying Neelgiri/ Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level an d ramming with tools wooden (Dhurmos) and than rolling the surface with light roller make the surface smoothen and light waterning w ith sprinkler and maintenance for 30 days or more till the grass establish properly, complete as per direction of the Engineer-in- Ch arge.
450
110506
-
... More
Plantation of Trees, Shrubs and Hedges at site including watering and removal of unserviceable materials as per direction of the Eng ineer-in-Charge (excluding cost of plant & water):
-
-
-
... More
Tree Plant
100
743
-
... More
Shrub Plant
100
372
-
... More
Hedge Plant/ Ground Cover
100
250
-
... More
Supply and planting sapling (not less than 45 cm in height and 60 cm centre to centre) of Casurina, Labrum, Gulmohar, Ashokas, Bottl e Palm, Bougenvilla, Hibiscus, Roses or other approved type of variety of plants, watering & maintenance for 30 days minimum comple t e in all respects inclusive of cost of all materials, labour, tools, tackles etc. as per specifications and directions of the Engi ne er-in-Charge.
300
153586
-
... More
Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 10 mm down size) mixed with approved brand of water proofing compound @ 1Kg/50 Kg bag of cement, in roof grading, coping, in bed concrete etc. at all heights & depths , including providing centering and shuttering, scaffolding, watering, curing, vibrating, etc. complete in all respects inclusive o f cost of all labour, materials, tools, tackles etc. as per drawings, specifications and direction of the Site Engineer.
18
142686
-
... More
CSW-DAHEJ-SUPPLY-ITC
-
-
-
... More
A TELECOM
-
-
-
... More
Supply of permanently-lubricated HDPE pipe of 40 mm OD (as per TEC GR) with minimum pressure rating of 6 Kg/cm2 and wall thickness of 3.5 mm, along with duct accessories such as couplers, end caps, end sealing plugs, warning tape etc. as per specifications.
1
61616
-
... More
Supply of OFC Jointing kits as per tender specifications.
1
7780
-
... More
Supply of Electronic Marker Locator cum Cable/ Pipe Locator, Fault Locator as per tender specifications
1
257324
-
... More
Supply of Transition pits for building entry points as per tender specifications
1
11487
-
... More
Supply of wall mounted Fibre Termination Box (FMS) as per tender specifications
2
26922
-
... More
Supply of spare OFC Jointing kits
10
77809
-
... More
Supply of spare RF ID type Electronic Markers
10
19918
-
... More
2 Pair unarmoured Telephone Cable as per specifications
1000
55460
-
... More
20 Pair Armoured PIJF Underground Telephone Cable as per specifications
100
16402
-
... More
5 Pair Armoured PIJF Underground Telephone Cable as per specifications
500
52510
-
... More
Cat 6 UTP (LAN) Networking Cable as per tender specifications
1000
23600
-
... More
Wall mounted telephone socket outlet with 2 port telephone jack face plate (white/ cream colour) including RJ11 I/O. The item includes modular plate & switch box/ gang box for fixing the face plate.
50
16933
-
... More
Duplex (2 port) Face plate (Network I/O point) (white/ cream colour) for Local Area Network including RJ45 I/O, modular plate & switch box/ gang box for fixing the face plate.
50
23482
-
... More
Wall mounted Cabinet (switching closet) for housing Networking Equipment/ CCTV hardware, patch panel & accessories including power distribution boxes, MCBs/ Isolator Switches, required installation materials as per tender specifications
4
173106
-
... More
24 Port L2 Network Switch with Optical Interfaces as per tender specifications
4
647843
-
... More
Power cable 3 core x 2.5 mm2 Armoured, Copper as per tender specifications
2000
217120
-
... More
600 VA UPS with 15 minutes battery back-up for LAN switch
4
31095
-
... More
B INSTRUMENTATION
-
-
-
... More
Supply of Pressure Indicators (PI) of the range 0 to 100 Kg / Cm2 as per the technical specifications attached in the Tender.
11
53314
-
... More
Supply of Pressure Indicators (PI) of the range 0 to 200 Kg / Cm2 as per the technical specifications attached in the Tender.
1
6405
-
... More
Supply of flame proof and weather proof fittings including EP/WP certificates as per the technical specifications attached.Glands (Suitable sizes),, ,,
-
-
-
... More
1 1/4" (5/4")
4
1527
-
... More
1"
4
991
-
... More
1/2"
4
415
-
... More
Supply of flame proof and weather proof fittings including EP/WP certificates as per the technical specifications attached.Plugs (Suitable Sizes),, ,,
1
1
-
... More
5/4"
4
288
-
... More
1"
4
288
-
... More
1/2"
4
141
-
... More
Supply of flame proof and weather proof fittings including EP/WP certificates as per the technical specifications attached.Reducers (Suitable sizes) ,, ,,
-
-
-
... More
1" to 1/2" Reducers
4
956
-
... More
1" to 3/4" Reducers
4
1051
-
... More
Supply and placing in position 5 mm thick steel checkered plates over cable ducts, valves, pits etc including keeping provision of holes for lifting arrangement and providing lifting arrangement complete in all respect inclusive of cost of all labour, material, carriage etc as per specification & the direction of the engineer in-charge/site engineer
10
51010
-
... More
Scrapper Detector Switch (24" 600#), Type: Vane, Body Material: Stainless steel, End connection: Flanged, Switch action: DPDT, Voltage:24 VDC, Current: 1A complete as per tender specifications.,,
1
68831
-
... More
Jacking Bracket for 600# Scrapper Detectors complete as per tender specifications.
1
51740
-
... More
Bushing 1" Butt Welded x 1/2" FNPT, Material: Carbon Steel, Manufacturing Process: Forged, Material Specification: A105, End Finish: Threaded, conform to ANSI 16.11,,
20
46041
-
... More
C MECHANICAL
-
-
-
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document
-
-
-
... More
18" SWMG ANSI 150#
120
96524
-
... More
4" SWMG ANSI 150#
30
6222
-
... More
16" SWMG ANSI 300#
14
14913
-
... More
12" SWMG ANSI 300#
62
49533
-
... More
3" SWMG ANSI 300#
14
4227
-
... More
2" SWMG ANSI 300#
42
6230
-
... More
1" SWMG ANSI 300#
36
3002
-
... More
20" SWMG ANSI 600#
10
15064
-
... More
12" SWMG ANSI 600#
2
2401
-
... More
4" SWMG ANSI 600#
4
2992
-
... More
2" SWMG ANSI 600#
4
869
-
... More
1" SWMG ANSI 600#
4
477
-
... More
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document.
-
-
-
... More
Fasteners for Flanges 18" x 150# (1.125" Dia. X 6.50" Length)
1400
380835
-
... More
Fasteners for Flanges 4" x 150# (0.625" Dia. X 4.00" Length )
224
15970
-
... More
Fasteners for Flanges 16" x 300# (1.250" Dia. X 8.5" Length )
220
123751
-
... More
Fasteners for Flanges 16" x 300# (1.250" Dia. X 10.5" Length ) - extended stud length for flanges with spectacle blind
20
15849
-
... More
Fasteners for Flanges 12" x 300# (1.125" Dia. X 7.5" Length )
800
337508
-
... More
Fasteners for Flanges 12" x 300# (1.125" Dia. X 9.0" Length ) - extended stud length for flanges with spectacle blind
192
114113
-
... More
Fasteners for Flanges 10" x 300# (1.0" Dia. X 7" Length )
120
30075
-
... More
Fasteners for Flanges 3" x 300# (0.75" Dia. X 4.75" Length )
104
9759
-
... More
Fasteners for Flanges 3" x 300# (0.75" Dia. X 5.5" Length ) - extended stud length for flanges with spectacle blind
10
1086
-
... More
Fasteners for Flanges 2" x 300# for flanges with spectacle blind (0.625" Dia. X 4" Length )
328
23512
-
... More
Fasteners for Flanges 2" x 300# (0.625" Dia. X 4.75" Length ) - extended stud length for flanges with spectacle blind
32
3091
-
... More
Fasteners for Flanges 1" x 300# (0.625" Dia. X 3.50" Length )
16
1027
-
... More
Fasteners for Flanges 20" x 600# (1.625" Dia. X 12.50" Length)
168
183687
-
... More
Fasteners for Flanges 20" x 600# (1.625" Dia. X 15.75" Length) extended stud length for flanges with spectacle blind
24
31489
-
... More
Fasteners for Flanges 12" x 600# ( 1.25" Dia. X 12" Length ) - extended stud length for flanges with spectacle blind
20
14396
-
... More
Fasteners for Flanges 12" x 600# (1.250" Dia. X 9.75" Length )
40
23785
-
... More
Fasteners for Flanges 4" x 600# ( 0.875" Dia. X 7.75" Length ) - extended stud length for flanges with spectacle blind
32
10649
-
... More
Fasteners for Flanges 4" x 600# (0.875" Dia. X 6.50" Length )
32
8952
-
... More
Fasteners for Flanges 2" x 600# ( 0.625" Dia. X 5.75" Length ) - extended stud length for flanges with spectacle blind
8
1050
-
... More
Fasteners for Flanges 2" x 600# (0.625" Dia. X 4.75" Length )
16
1682
-
... More
Fasteners for Flanges 1" x 600# (0.625" Dia. X 5.0" Length ) - extended stud length for flanges with spectacle blind
16
1908
-
... More
Fasteners for Flanges 1" x 600# (0.625" Dia. X 4.00" Length )
26
2200
-
... More
Supply and delivery of Steel Flanges at respective stations as per Station wise Break up of material supply and as per technical spe cifications from approved vendors specified in tender document:
-
-
-
... More
16", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A105
16
208057
-
... More
12", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A105
60
585164
-
... More
10", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A105
4
34223
-
... More
4", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2
4
10045
-
... More
3", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2
14
20822
-
... More
2", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2
42
30567
-
... More
1", WNRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2
36
23702
-
... More
20", WNRF FLANGE, ANSI - 600# (B 16.5)
8
288775
-
... More
12", WNRF FLANGE, ANSI - 600# (B 16.5)
4
69549
-
... More
4", WNRF FLANGE, ANSI - 600# (B 16.5)
4
17426
-
... More
2", WNRF FLANGE, ANSI - 600# (B 16.5)
3
3163
-
... More
1", WNRF FLANGE, ANSI - 600# (B 16.5)
4
2719
-
... More
18", BLRF FLANGE, ANSI - 150# (B 16.5)
4
51532
-
... More
4", BLRF FLANGE, ANSI - 150# (B 16.5)
2
2025
-
... More
16", BLRF FLANGE, ANSI - 300# (B 16.5)-ASTM A105
4
91248
-
... More
12", BLRF FLANGE, ANSI - 300# (B 16.5)-ASTM A105
6
102655
-
... More
3", BLRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2
4
7049
-
... More
2", BLRF FLANGE, ANSI - 300# (B 16.5)-ASTM A350 LF2
4
3087
-
... More
1", BLRF FLANGE,ANSI - 300# (B 16.5)-ASTM A350 LF2
2
725
-
... More
20", BLRF FLANGE, ANSI - 600# (B 16.5)
4
187955
-
... More
2", BLRF FLANGE, ANSI - 600# (B 16.5)
2
1848
-
... More
18", SORF FLANGE, ANSI - 150# (B 16.5)
116
1055979
-
... More
4", SORF FLANGE, ANSI - 150# (B 16.5)
30
23006
-
... More
Supply and delivery of following mentioned Spectacle Blinds at respective stations as per Station wise Break up of material supply a nd as per technical specifications indicated in tender documents (As per ASME B16.48)
-
-
-
... More
16" Spectacle Blind 300# F/F A/G - ASTM A105
1
79760
-
... More
12" Spectacle Blind 300# F/F A/G - ASTM A105
12
538386
-
... More
3" Spectacle Blind 300# F/F A/G - ASTM A350 LF2
1
8055
-
... More
2" Spectacle Blind 300# F/F A/G - ASTM A350 LF2
4
26307
-
... More
1" Spectacle Blind 300# F/F A/G - ASTM A350 LF2
4
14007
-
... More
20" Spectacle Blind 600# F/F A/G - ASTM A105
1
163924
-
... More
12" Spectacle Blind 600# F/F A/G - ASTM A105
1
68848
-
... More
4" Spectacle Blind 600# F/F A/G - ASTM A350 LF2
1
16032
-
... More
2" Spectacle Blind 600# F/F A/G - ASTM A350 LF2
1
9742
-
... More
Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document
-
-
-
... More
18"x 4" ANSI 150# UnEqual Tee
12
159789
-
... More
4"x2" 300# Unequal Tee -ASTM A420 Gr.WPL6
4
5985
-
... More
2"x1" 300# Unequal Tee -ASTM A420 Gr.WPL6
17
9817
-
... More
3"x2" x 300# Unequal Tee -ASTM A420 Gr.WPL6
4
4489
-
... More
3"x1" x 300# Unequal Tee -ASTM A420 Gr.WPL6
3
4558
-
... More
20"x12" x 600# Unequal tee
1
28641
-
... More
18" X 150# Equal Tee
5
95921
-
... More
4" ANSI 150# Equal Tee
5
6302
-
... More
16" 300# Equal Tee - ASTM A 234 WPB
1
16444
-
... More
2" 300# Equal Tee - ASTM A420 Gr.WPL6
6
2110
-
... More
1" 300# Equal Tee - ASTM A420 Gr.WPL6
4
1369
-
... More
20" x 600# Equal Tee
1
19159
-
... More
12" x 600# Equal Tee
2
36291
-
... More
4" ANSI 600# Equal Tee
2
3070
-
... More
18" ANSI 150# 90 deg LR Bends
10
185752
-
... More
4" ANSI 150# 90 deg LR Bends
12
10441
-
... More
16" ANSI 300# 90 deg LR Bends -ASTM A 234 WPB
1
19431
-
... More
20" ANSI 600# 90 deg LR Bends WPHY-60/70, Sch. STD
3
50259
-
... More
18" ANSI 150# 45 deg LR Bends
10
93316
-
... More
4" ANSI 150# 45 deg LR Bends
12
6033
-
... More
16" x 300# 45 deg LR Bends -ASTM A 234 WPB
2
21783
-
... More
20"X12" 300# Concentric Reducer-ASTM A 234 WPB
1
30442
-
... More
12"X10" x 300# Concentric Reducer -ASTM A 234 WPB
4
60884
-
... More
12"x2" x 600# Weld-o-let
4
13631
-
... More
Supply of ASTM A106 Gr.B /A333 pipes at respective stations as per Station wise Break up of material supply and as per technical sp ecifications from approved vendors specified in tender document.
-
-
-
... More
6.625" ODx 0.280" WT (Sch.STD) ASTM A 333 Gr 6 bare Pipe
10
27464
-
... More
4.500" ODx 0.237" WT (Sch.STD) ASTM A 333 Gr 6 bare Pipe
30
52840
-
... More
3.500" ODx 0.216" WT (Sch.STD) ASTM A 333 Gr 6
70
80722
-
... More
2.375" ODx 0.218" WT (Sch.XS) ASTM A 333 Gr 6 bare pipe
80
55187
-
... More
1.315" ODx 0.179"WT (Sch.XS) ASTM A 333 Gr 6 Bare pipe
50
19573
-
... More
Flame Arrestor:Supply and delivery of following mentioned Flame Arrestor at respective stations as per Station wise Break up of mate rial supply and as per technical specifications indicated in tender docuemnts: 4" Flame Arrester _L
1
194267
-
... More
Supply of IS: 3589, Gr. Fe 410 pipes with factory coated internal coating at respective stations as per Station wise Break up of mat erial supply and as per technical specifications from approved vendors specified in tender document
-
-
-
... More
18" ODx 0.250" WT IS3589 FE410 Pipe Sch. 10
400
1857645
-
... More
Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document -FOR FIRE WATER NETWORK.
-
-
-
... More
18"x ANSI 150# HOV F/F API 600 Gate Valve FW
4
433188
-
... More
4"x ANSI 150# HOV F/F API 600 Gate Valve FW
8
94710
-
... More
" Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document - Globe Valve s "
-
-
-
... More
12"x ANSI 600# F/F BS-1873 GLOBE Valve
1
207880
-
... More
4"x ANSI 600# F/F BS-1873 GLOBE Valve
1
61730
-
... More
2"x ANSI 600# F/F BS-1873 GLOBE Valve
2
49215
-
... More
2"x ANSI 300# F/F BS-1873 GLOBE Valve
7
147142
-
... More
1"x ANSI 800# W/W ISO 15761 GLOBE VALVE
18
53474
-
... More
12"x ANSI 300# F/F BS-1873 GLOBE Valve
1
167485
-
... More
Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document - Thermal Relie f Valves
-
-
-
... More
1" x 1" 600# x300# F/F TRV
4
75289
-
... More
1" x 1" 300# x300# F/F TRV
15
213305
-
... More
Supply of Fire Fighting Monitor/hydrant
-
-
-
... More
High Volume Long Range HVLR Foam Monitor 750 GPM capacity stand post type with inlet flange of 4" X 150#
5
1638117
-
... More
Stand Post Type double way fire hydrant fitted with 2 Nos of single landing valve complete as per IS: 5290 alongwith 4" x 150# WNRF Flange
12
174891
-
... More
Supply and delivery of Fire Fighting Equipment at respective stations as per Station wise Break up of material supply and as per tec hnical specifications from approved vendors specified in tender document.
-
-
-
... More
9 kg DCP Extinguisher
7
30020
-
... More
4.5 kg CO2 Extinguisher
6
41442
-
... More
2 kg CO2 Extinguisher
12
65561
-
... More
2.5 kg clean agent extinguishers IS 15683 Marked
4
51393
-
... More
2 kg clean agent extinguishers IS 15683 Marked
2
23165
-
... More
Fire Hose Box for keeping 2 Nos. of 15 M Type B delivery hose and one no. jet nozzle
11
46792
-
... More
Type B Delivery Hoses of 15 M length bearing IS-636 mark
28
210895
-
... More
Jet Nozzles
14
61126
-
... More
Fog Nozzle
2
12821
-
... More
Universal Nozzle
2
10850
-
... More
Water curtain nozzle
2
4607
-
... More
Sand drum with scoop
4
9463
-
... More
Pair of Rubber hand gloves for Electrical work bearing IS mark
2
2366
-
... More
First Aid Box with Snake serum
1
1783
-
... More
Fire Bucket
4
1525
-
... More
Safety Helmet
10
3446
-
... More
Strecher WITH BLANKET
2
9869
-
... More
Explosimeter
2
72098
-
... More
Rescuscitor
2
14425
-
... More
Electrical Siren
1
33294
-
... More
Hand Operated siren
1
14821
-
... More
Water gel blanket
2
30281
-
... More
Positive Pressure type self containing Breathing Apparatus
1
7247
-
... More
Safety Torch
2
8345
-
... More
Fire Proximity suit
1
7247
-
... More
Wind socks
4
12853
-
... More
PA system/ Loudhailer/ megaphone
1
36240
-
... More
Red & Green flag (Pairs) 2 nos in each colour
2
2827
-
... More
Extinguisher box for 9 kg DCP Extinguishers
5
23116
-
... More
Dry Chemical Powder silliconised potassiun bicarbonate type IS marked, pack in 10Kg
100
31516
-
... More
CO2 cartridge - 200 gm capacity for 9 kg
6
3608
-
... More
Low temparature rubber hand gloves
4
35502
-
... More
Low temparature protective clothing
2
844316
-
... More
Emergency Kit: Supply and delivery of Emergency Kit consisting oflisted emergency equipments as per Annexure-VII
1
949500
-
... More
Corrosion Coupon: Supply of TOR Fitting Complete With Plug & Cap and Full bore Threaded Ball Valve: TOR fitting complete with Caps, Plugs, O-Rings, Nipple & 2" 600# full bore threaded ball valve.
-
-
-
... More
Supply of TOR Fitting Complete With Plug & Cap and Full bore Threaded Ball Valve: TOR fitting complete with Caps, Plugs, O-Rings, N ipple & 2" 600# full bore threaded ball valve
4
92060
-
... More
RETRACTABLE CORROSION COUPON HOLDER, 16"
2
7627
-
... More
RETRACTABLE CORROSION COUPON HOLDER, 20"
1
4767
-
... More
Supply and delivery of BS 5351/ISO 17292 Ball valve for use in process piping at respective stations as per Station wise Break up o f material supply and as per technical specifications from approved vendors specified in tender document. 1" x 800# Ball valve HOV W /W ISO 17292
38
478530
-
... More
Supply and delivery of API 6D Ball valves for use in process piping at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document.
-
-
-
... More
2" F/F ANSI 600# A/G, API6D BALL VALVE HOV
2
50544
-
... More
2" F/F ANSI 300# A/G, API6D BALL VALVE HOV
12
312791
-
... More
4" F/F ANSI 600# A/G, API6D BALL VALVE HOV
1
50544
-
... More
3" F/F ANSI 600# A/G, API6D BALL VALVE HOV
1
39098
-
... More
Supply and delivery of BS 5351 Ball valve for use in air line at respective stations as per Station wise Break up of material suppl y and as per technical specifications from approved vendors specified in tender document
-
-
-
... More
3" F/F ANSI 300# A/G, BALL VALVE BS 5351 Air Line HOV
5
137470
-
... More
2" F/F ANSI 300# A/G, BALL VALVE BS 5351 Air Line HOV
5
89586
-
... More
1" W/W ANSI 800# A/G, BALL VALVE BS 5351 Air Line HOV
10
205097
-
... More
D ELECTRICAL
-
-
-
... More
Supplying the following Safety Equipment as per directions of Site Engineer / Engineer in Charge
-
-
-
... More
RUBBER HAND GLOVES Rubber hand gloves suitable for 11/6.6 KV operation with ISI mark.
1
3215
-
... More
Insulating Elastomer mats conforming to IS 15652 2006 of thickness 2 mm -Class A
35
83951
-
... More
Supply of fully charged CO2 fire extinguishers as per specifications -4.5 kg capacity as per IS 2878 latest
2
13070
-
... More
Supply of The flameproof -Exd- and weatherproof -Minimum IP 65- Distribution Boards -with Spares- made up of Cast Alluminium Alloy LM 6 with 125 A, TPN busbar, 01 no. 100 Ampere, 4 Pole MCCB suitable for termination of cable of size up to 3.5Cx50 sqmm, Aluminiu m Armoured cable. 01 additional spare entry suitable for 3.5CX50sqmm cable size shall be provided, which shall be plugged with flam e proof and weatherproof entry plug. 09 Nos. 32A, 3 Pole MCBs suitable for termination of 3C x 10 sq.mm., Armoured cable Breaking ca pa city of MCB shall be 10 kA for 1 Sec and shall be C curve application suitable for motor duty. It shall be certified for applicat ion in Zone I, Gas Group IIA & IIB, Temp class T3 and shall be of approved make as mentioned in the technical specifications. The item includes suply of flame proof double compression cable glands of nickel plated brass material for each cable entry 01 no. for cable entry of size up to 3.5C x 50 sq.mm., 02 no for 3.5 C x 25 Sq mm cable, 09 no. for 3Cx10 sqmm, Aluminium armoured cable. Cabl e dime nsions shall be provided at drawings approval stage. Supply shall be as per technical specifications of flameproof DB attache d with supply specifications.
1
95431
-
... More
LT Cables FRLSH Supply of 1.1 KV, XLPE insulated, extruded PVC type ST 2 inner sheathed, galvanized armoured, PVC type ST 2 overa ll sheathed, Stranded, FRLSH, C2, Smoke density less than 40%
-
-
-
... More
AL,3.5CX400 mm²,A2XFY
4000
4799343
-
... More
AL,3.0CX240 mm²,A2XFY
700
551578
-
... More
AL,3.5CX50 mm²,A2XFY
1000
162155
-
... More
AL,3.5CX25 mm²,A2XFY
1000
116914
-
... More
AL,4.0CX16 mm²,A2XFY
700
61801
-
... More
AL,4.0CX10 mm²,A2XFY
500
44143
-
... More
AL,3.0CX10 mm²,A2XFY
5500
325733
-
... More
CU,4CX4 mm²,2XWY,
1000
132230
-
... More
CU,2CX4 mm²,2XWY
800
61463
-
... More
CU,3CX2.5 mm²,2XWY
1000
72204
-
... More
CU,6CX2.5 mm²,2XWY
1300
167252
-
... More
SIGNAL CABLE As per Tender Specification
-
-
-
... More
2P X1.5 SQMM
500
36585
-
... More
Supply of 415V indoor type Low Voltage switchboard complete with all accessories and spares as per technical specifications, data sh eet and equipment details -Attachment 5 &6- as below
-
-
-
... More
PMCC -MVP KGPL GCPTCL Dahej 01-
1
3719771
-
... More
CSW-DAHEJ-SUPPLY-EXTRA ITEMS-ITC
-
-
-
... More
A MECHANICAL
-
-
-
... More
Supply and delivery of Spiral Wound Metallic Gaskets at respective stations as per Station wise Break up of material supply and as p er technical specifications from approved vendors specified in tender document
-
-
-
... More
10" SWMG ANSI 300#
4
4153
-
... More
8" SWMG ANSI 150#
2
774
-
... More
Supply and delivery of Steel Fasteners at respective stations as per Station wise Break up of material supply and as per technical s pecifications from approved vendors specified in tender document.
-
-
-
... More
Fasteners for Flanges 8"" X 150# (0.750" Dia. X 4.75" Length)
16
2039
-
... More
Supply and delivery of Steel Flanges at respective stations as per Station wise Break up of material supply and as per technical s p ecifications from approved vendors specified in tender document.
-
-
-
... More
18", SORF FLANGE, ANSI - 150# (B 16.5)
18
163858
-
... More
8", SORF FLANGE, ANSI - 150# (B 16.5)
2
4745
-
... More
Supply and delivery of pipe fittings at respective stations as per Station wise Break up of material supply and as per technical spe cifications from approved vendors specified in tender document:
-
-
-
... More
20" X 12" ANSI 600# Unequal Tee
1
43028
-
... More
18"X 8" ANSI 150# Unequal Tee
1
20896
-
... More
4" X 3" ANSI 600# Concentric Reducer
1
2131
-
... More
12" ANSI 600# 45 deg LR Bends
2
15314
-
... More
3" ANSI 300# 45 deg LR Bends
2
564
-
... More
12" X2" ANSI 300# Weld-o-let
15
41223
-
... More
Supply of IS: 3589, Gr. Fe 410 pipes with factory coated internal coating at respective stations as per Station wise Break up of mat erial supply and as per technical specifications from approved vendors specified in tender document
-
-
-
... More
8.625" ODx 0.250" WT IS3589 FE410 Pipe
12
79338
-
... More
Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document - Globe valves
-
-
-
... More
3" ANSI 300# F/F Globe Valve BS 1873
1
28565
-
... More
Supply and delivery of API 6D Ball valves for use in process piping at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document.
-
-
-
... More
3" F/F ANSI 300# A/G, API6D BALL VALVE HOV
1
28029
-
... More
2" F/F ANSI 300# A/G, API6D BALL VALVE HOV
20
365328
-
... More
Supply and delivery of BS 5351/ISO 17292 Ball valve for use in process piping at respective stations as per Station wise Break up of material supply and as per technical specifications from approved vendors specified in tender document
-
-
-
... More
1" BS5351/ ISO17292 Ball Valve F/F ANSI 600#
2
33339
-
... More
Supply of Valves at respective stations as per technical specifications from approved vendors in the tender document -FOR FIRE WATER NETWORK.
-
-
-
... More
8"x ANSI 150# HOV F/F API 600 Gate Valve FW
1
29424
-
... More
B ELECTRICAL
-
-
-
... More
"Aluminium LT Cables FRLSH . 1.1 KV, XLPE insulated, extruded PVC type ST-2 inner sheathed, galvanized armoured, PVC type ST-2 overa ll sheathed, Stranded, FRLSH, C2, Smoke density less than 40% AL, 3C x 185 mm²"
750
502733
-
... More
CSW-DAHEJ-COMPOSITE-EXTRA ITEMS-ITC
-
-
-
... More
A CIVIL
-
-
-
... More
Bored cast-in-situ piles (Percussion Drilling): Boring, providing and installation bored cast-in-situ reinforced cement concrete pil es of grade M-25 of specified diameter and length below the pile cap, to carry a safe working load not less than sp
-
-
-
... More
450 mm diameter piles 450 mm diameter piles Composite 60:40
1350
3226780
-
... More
Integrity testing of Pile Integrity testing of Pile using Low Strain/ Sonic Integrity Test/ Sonic Echo Test method in accorda Compos ite 60:40
170
211225
-
... More
Vertical load testing of piles: Vertical load testing of piles in accordance with IS:2911 (Part-IV) including installation of loadin g platform by Kentledge/ Anchor piles method and preparation of pile head or construction of test c
-
-
-
... More
Vertical load testing of piles: Vertical load testing of piles in accordance with IS:2911 (Part-IV) including installation of loadin g platform by Kentledge/ Anchor piles method and preparation of pile head or construction of test c
-
-
-
... More
Single Pile (Capacity= 50T): Single pile up to 50 tonne Safe Capacity :
-
-
-
... More
Routine Test Routine Test (Test Load 1.5 times the Safe Capacity) [Note: Unit "EA" shall mean "PER TEST"] Composite 60:40
4
106235
-
... More
Lateral load testing of single pile: Lateral load testing of single pile in accordance with IS Code of practice IS:2911 (Part-IV) fo r determining safe allowable lateral load on pile :
-
-
-
... More
Safe Capacity= 50T Up to 50 tonne capacity pile. [Note: Unit "EA" shall mean "PER TEST"] Composite 60:40
4
106235
-
... More
Reinforcement for RCC-Upto plinth Level: Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in p osition and binding all complete upto plinth level :
-
-
-
... More
TMT Bars (Fe-500D grade or more) Thermo-Mechanically Treated bars of grade Fe-500D or more Composite 60:40
17200
1900517
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements