Mormugao Port Trust Tender

Earth Filling with available earth at site or supplied by department, in layers of 20 cm (8") and consolidating and watering copiously, rolling with vibratory roller of 80-100 KN static weight etc complete. All tools, plant ,labour and material etc. complete.

Providing and laying Soling with hard laterite rubble stone of 10 cm to 15 cm size in drains and cable trenches, including hand packing, consolidating,watering, ramming etc. complete. All labour tools, plant & material etc. complete.

Providing and laying Granular Sub- Base of 25cm thick with basaltic stones of Grading III as per Section 401 and its subsections of "Specifications for Road and Bridge works (MORTH) published by IRC (Latest Edition), in two layers including spreading, watering and consolidating with vibratory road rollers of 80-100 KN static weight etc. complete and as directed by Chief Engineer or his representative. All tools, plant,labour and material, etc. complete. (Note: Follow Technical Specifications in Section 401 and its subsections)

Providing and laying Wet Mix Macadam , 15cm thick ,using basaltic stones as per Sec 406 "Specifications for Road and Bridge works (MORTH) published by IRC (Latest Edition), including spreading, packing, consolidating to required camber and gradient by rolling with vibratory roller of 80-100 KN static weight, compacting to the required density, etc. complete and as directed by the Chief Engineer or his representative All tools, plant,labour and material, etc. complete (Note: Follow Technical Specifications in Sections 406 and its sub sections.)

Providing and laying Dry Lean Cement Concrete, 7.5 cm using black trap stone metal aggregates as per Section 601 "Specifications for Road and Bridge works (MORTH) published by IRC ( Latest Edition), including mixing,laying, consolidating to required camber and gradient by rolling with vibratory roller of 80-100 KN static weight, compacting to the required density, etc. complete and as directed by the Chief Engineer or his representative All tools, plant,labour and material, etc. complete ( Note: Follow Technical Specifications in Section 601 and its subsections )

Providing and laying 100 mm thick interlocking concrete paving blocks (Heavy duty) of M50 grade of approved make, pattern, colour, laying over a bed of coarse natural sand or crushed quarry fines (as per technical specifications) for thickness of 40-60 mm average thickness, to required slope and level,including chipping /excavating the undulated surface, joint filling with fines/ sand and compacting with heavy duty vibrator/ plate compactor etc. complete as per specification, including providing equivalent grade of concrete for filling gaps at edges/corners, cleaning the surfaces, etc. as directed by the Chief Engineer or his representative. (Rate shall include cost of manufacturing, transporting, loading & unloading, laying, all leads & lifts, equipments, testing etc. complete.) All tools, plant, materials and labour etc. complete. Follow relevant IRC SP:63 (latest revision)

Providing and laying Plain Cement concrete of M15 grade with Ready Mixed Concrete ( RMC) using 20 mm graded black trap stone metal out of quarried boulders as coarse aggregate including mixing, depositing, consolidating, levelling, curing etc. complete. All, tools, plant, labour and material etc. complete.( Follow Technical Specification of MORTH)

Providing and laying R.C.C. M25 grade with Ready Mixed Concrete ( RMC) using 20 mm graded black trap stone metal out of quarried boulders as coarse aggregate in RCC drains/trenches, etc. of any size and shape including mixing, placing, consolidating, vibrating, leveling, curing etc. but excluding the cost of shuttering and reinforcement. All tools, plant, labour & material etc. complete. (Follow Technical Specification of MORTH)

Providing and fixing reinforcement in drains /trenches with Fe500 Torsteel conforming to IS:1786 or equivalent including cutting, bending, tying grills, placing in position, holding in position during concreting , ready made cover blocks of required sizes etc. as directed by Chief Engineer or his representative including cost of binding wire. All tools, plant,labour and material, etc. complete

Providing & fixing shuttering for the slab/walls/ cast in situ slab bottom , of Drains/Trenches, etc. of any size and shape including cleaning, oiling, closing, gaps, removing shuttering after concreting, provisions of necessary props, bracings and other supports etc. All labour, tools,plant and material etc. complete.

Providing and placing in position RCC M30 grade factory made Precast Drain /Cable Trench cover slabs of size 60cmx45cmx20cm ( With Prior approval of department) , including providing reinforcement as per attached drawing, transporting to site , loading/unloading, placing etc. complete. . All tools, plant, materials and labour etc. complete.

Demolishing and clearing of Cement concrete in trap stone metal, disposal of unserviceable material within a lead of 100m including all tools & plant, labour and material complete

Demolishing RCC work in trap stone metal including cutting of reinforcement steel, stacking of seviceable material and disposal of unserviceable material within a lead 0f 100m including all tools & plant , labour, material etc. complete.

PART-B: Earthwork using Heavy Machinery

Hiring Charges of Back hoe Excavator Machine with breaker attachment( JCB or equivalent) for carrying out excavation in dense hard soil/murrum/ cargo dumps, boulders, concrete etc. at places directed in Dock area and Headland Sada area, including excavating, loading, levelling, grading etc complete. The charges to include cost of fuel, consumables,lubricants, operator & cleaner charges. All tools, plant , labour and materials etc complete.

Hiring Charges of Tipper Truck of minimum 6 M3 capacity, for transporting of available excavated earth/ cargo dumps , inside Dock area and from Headland Sada area, as directed by Chief Engineer or representative . The charges to include cost of fuel, consumables,lubricants, driver & cleaner charges. All tools, plant , labour and materials etc complete.

Hiring Charges of Vibratory Road Roller , 80-100 KN static weight for rolling on filled embakments, excavated areas etc as directed by Chief Engineer or representative . The charges to include cost of fuel, consumables, lubricants, driver & cleaner charges. All tools, plant, labour and materials etc complete.