Military Engineer Services Tender

Dismantling and taking down old Refrigeration system including various type comprising compressors, condenser ,insulations, doors etc. and all connected items including demolition of foundation for facilitating replacement of BER Cold and cool room with new system and removing from site all as directed. Note:- The items obtained from dismantling i.e. from Sl No.2 and 3 shall be deposited to MES store yard.

Supply, installation, testing and commissioning of cold room for a room size of 7m x 7m x 4m (external dimensions) consisting of walls and ceiling panels made out of SS-304 (inner and outer skin) of 24 SWG sheet 127 mm thick eco-friendly cyclopentane PUF Panels SS inside and PPGI outside and floor insulation of PUF slab of 100 mm thickness for maintaining temperature of (minus) -18°C ± 2°C, with non CFC refrigerant R404 a , 3 nos and door of size 34"x78" SS 304 swing type, 3 nos heavy duty hinges with insulation of 127 mm thickness including copper pipe up to 20 running meter , door heaters, digital temperature indicators, controller unit, ball valves in suction and discharge lines and all safety measures of capacity not below 72000 Btu/Hr (3x 24000 Btu/Hr), with provision of man lock inside , manual internal override, internal electric hooter, external key lock, indoor to outdoor cable including Cu piping with insulation, communication frame condenser stand protective shed for condensing units and foundation works and stainless steel 304 racks - 11 nos of size 7ft x 3.5 ft x 7.5 ft with 3 shelf's and 3 mm gauge thickness complete. Make Blue star/ carrier all as per manufacturer recommendations & instructions Note : contractor shall prepare & submit detail drawing of complete cold room along with position and dimension of rack, railing & indoor unit for approval by the GE before installation.

Supply, installation, testing and commissioning of cool room for a room size of 7m x 7m x 4m (external dimensions) consisting of walls and ceiling panels made out of SS-304 (inner and outer skin) of 24 SWG sheet 60 mm thick eco-friendly cyclopentane PUF Panels SS inside and PPGI outside and floor insulation of PUF slab of 50 mm thickness (Kota stone) for maintaining temperature of +2°C to +8°C, with non CFC refrigerant R404 a , 2 nos and door of size 34"x78" SS 304 swing type, 3 nos heavy duty hinges with insulation of 60 mm thickness including copper pipe up to 20 running meter , door heaters, digital temperature indicators, controller unit, ball valves in suction and discharge lines and all safety measures of capacity not below 40000 Btu/Hr (2x 20000 Btu/Hr), with provision of man lock inside , manual internal override, internal electric hooter, external key lock, indoor to outdoor cable including Cu piping with insulation, communication frame condenser stand protective shed for condensing units and foundation works and stainless steel 304 racks - 11 nos of size 7ft x 3.5 ft x 7.5 ft with 3 shelf's and 3 mm gauge thickness complete. Make Blue star/ carrier all as per manufacturer recommendations & instructions Note : contractor shall prepare & submit detail drawing of complete cold room along with position and dimension of rack, railing & indoor unit for approval by the GE before installation.