Military Engineer Services Tender

SCHEDULE "A" PART-IV (INTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/PATH/CULVERT) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (REFRIGERATION AND AIR CONDITIONING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-XI (SOLAR WATER HEATER) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

INTERNAL WATER SUPPLY S & F Two way bib tap 15 mm Make – Drizzel or equivalent

INTERNAL ELECTRIC SUPPLY S & F modular type bell ding dong of 2 module size, conforming to IS: 8884- 1978 complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 43 or equivalent model of ABB (snieo) / L&T (Entice) / Wipro

S & F modular type 1 module TV socket complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 25 or equivalent model of Precision

S & F 20 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. Make: BAJAJ Cat-Part No. 112785 BCLAB 20W or equivalent model of Havells, Philips or Wipro

S & F 9 W LED lamp complete all as specified and directed. Make: BAJAJ Cat-Part No. 112407 BCLSB 10 WH or equivalent model of Havells, Philips or Wipro

S & F 20 W LED street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 100 lumen/W, integral SMPS based constant current electronic LED driver with THD 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket 1.5 m long with including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and light grade GI pipe, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. Make: BAJAJ Cat-Part No. BAJAJ 169829 BCLST 20W LED I or equivalent model of Havells, Philips or Wipro

S & F BEE five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Crompton Cat-Part No. ENTRUST50 or Havells Cat- Part No. ES-50 or equivalent model of Usha or BAJAJ

S & F energy efficient non-metalic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. VENTILUS 10" or equivalent model of Usha, Havells or BAJAJ

Supply, installation, testing and commissioning of Cl1.0 accuracy , high durability, sleek LED display energy & VAF+PF meters having current range 0- 30 A, capable of measuring kW, kWh and PF parameters along with pulse output for basic tracking on EMS systems and RS 485 for native integration into EMS complete all as specified and directed. 1- Phase energy meter Make: Schneider Cat-Part No. EM1200 or equivalent model of L & T or HPL.

S & F ISI marked MCB for AC applications till 63 A, having breaking capacity Icn = 10 kA, conforming to IS/IEC 60898-1-2002, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, all complete as specified and directed. Make: Schneider, Legrand, Havells (a) 6 A, SP MCB, C- curve

(b) 16 A, SP MCB, C- curve

(c) 20 A, SP MCB, C- curve

(d) 32 A, SP MCB, C- curve

(e) 40 A, SPN MCB, C- curve

S & F MCCB of 63 A, 25 kA, 04 pole all as specified and directed. Make: Schneider, Legrand, Havells

M & L for earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanised steel wire of diameter 4.0 mm as earth lead, by means of bolts, buts, check nuts and washers of galvanised iron or steel, galvanized iron pipe of 15 mm diameter, connected to earthing test point, all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and including excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep, with a 10 mm thick CI cover, hinged to CI frame on ground level, GI watering pipe, funnel, etc. as all specified and directed.

EXTERNAL ELECTRIFICATION Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to ISI 14930 ( Part I & II ), size 63mm outer dia for protection of UG cable, with all fittings laid in trenches / road / nallah or fixed along wall. poles or laid under floor including road cutting & making good, complete all as specified and as directed by Engg in Charge (excavation and earth work shall be measured and paid seperately) Make : Rex/Poly/Gemini or equivalent.

M & L for earthing complete with galvanized steel earth plate electrode size 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs below ground level) with top edge of the earth plate not less than 1.5 mtr below normal ground level connected to galvanized earth strip 32x6 mm by means of bolts nuts check nuts and washers of galvanized iron including 15mm bore GI pipe medium grade up to 7.5 m long all as shown in electrical plate No. 3 of MES SSR Part-1, 2009 and as specified or indicated and testing on completion including excavation/ earth work in any type of strata, PCC (1:3:6) type C1 earthing chamber, precast RCC slab 50 mm thick in reinforced cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric (XPM weight not less than 4Kg/Sqm) cast iron frame funnel with wiremesh 20mm bore medium grade GI watering pipe lugs 15mm bore medium grade GI protection pipe test point etc complete all as specified and directed by Engg-in-charge NOTE: (1) item includes the cost of 7.5 m GI pipe for protection of earth lead any additional in length shall be adjusted through deviation order. (2) item includes the cost of 7.5 mtr Gl earth lead. any additional in length shall be measured and paid under respective item of this schedule.

M&L for LT Panel Board cubical KIOSK, Outdoor type, 415Volts AC 50Hz 4 wire + E fabricated Polycarbonate Nominal size 900mm x600mm x 660mm RAL 7035 finish conferming to IP 54 complete including copper bus bar 100Amps 4 strip mounted on porcelain insulted a& inclosed in chamber bottom cable entry comprising of following :- (a) Incoming MCCB 63 Amps four pole with microprocessor based release braking capacity 35KA - 01No. (b) Outgoing MCCB 63 Amps TPN - 02 No. (c) Indicating lamps set RYB 01 set. (d) Energy Meter, AC single phase of accuracy class 1.0, 240V, 50Hz with backlit LCD display of rating 5 - 30A (measures and displays KWH, V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, temper logging, optical communication port display in absence of power with transparent hinge type box - 3 Nos.

REFRIGERATION AND AIR CONDITIONING Supply and fix voltage stabilizing for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 140V to 280V, with output voltage stabilized at 230 Volt with accuracy of +/- 2.5% and of capacity 1.0 KVA. Make: V-Guard/Volina/AE/ Aplab.

SOLAR WATER HEATER Supply, Install, Testing and commissioning of 'Solar Hot Water System' (Flat Plate Collector)"based on indirect transfer of heat of capacity 200 LPD with electrical heating backup.