Military Engineer Services Tender

Supply and fix sheet metal enclosure TPN +E with three pin and earth plug with socket complete with one MCB TP 63A,415V complete all as specified and directed.( for Washing Extractor & drying thumbler .)

Supply and fix sheet metal enclosure TPN +E with three pin and earth plug with socket complete with one MCB TP 32A,415V complete all as specified and directed.( for Vacuum finishing Table,and flat bed press)

Supply and fix sheet metal enclosure (DB) for MCCB (Suitable for 160 Amps), vertical type,8 way, triple pole and neutral, 415 volts, double door with 250 Amps rated bus bar with IP 54- IK 09 complete all as specified and directed.

Supply and Fix MCCB 415V, 3 phase 50 HZ FP 160 Amps breaking capacity 36KA. Note MCCB Should suitable to fit in VTPN DB complete all as specified and directed.

Supply and fix MCB, Triple pole & neutral , 40 -63 Amp, 415 Volts, 'C' series 10 KA complete all as specified and directed.

Material and labour for earthing complete with GI steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to GI Strip 25x4mm by means of bolts, nuts, check nuts and washers of GI or steel including necessary earth work and excavation of in any type of strata, PCC 1:3:6 type C-2 GI tubing 20 mm dia for watering and 32 mm dia GI tubing for protection of wire etc all as per electrical plate No.5 of SSR part I including connecting to electrical equipments and testing on completion complete all as specified and directed.

Supply and fix GI strip 25x4mm for ring conductor complete all as specified and directed.

Supply , install, commissioning and testing of following equipment for mechanical laundry and all other connected work seriveces of plumbing work with suitable size pipe,and ducting work complete all as specified and directed a) Washing Extractor 1 x 60 KG Capacity electrically operated,water inlet 25mm and drain outlet 65mm heating coil 23KW,Net Weight1250 KG,Water cosumption 600 LTRS/HR and overall dimention 1350X1450X1725mm Model SWE/60/E Make: Supershine or equivalent in model in Stefab/Fabcare:- qty - 02 Nos c) Drying Tumbler 1 x 60 KG capacity electrical heating coil 19.3 KW,Exhaust size 225 mm,Air rate 12mm/8KG,Net Weight 575KG,overall dimention 1060x 1570x 1980mm Model: SDT/60/E Make: Supershine or equivalent in model in Stefab/Fabcare qty - 01 Nos d) Flat bed press head and buck size 1500x 750mm ,15.75KW electrical heating coil,Net Weight 570KG, overall dimention 1600x 1570x 1280mm Model : SFB/30/E Make: Supershine or equivalent in model in Stefab/Fabcare qty - 01 No e) Vaccum Finishing Table with Iron and buck size 1200x750,8.25 electrical heating coil,Net Weight 70KG,overall dimention 1066x 605x840mm, Model : VFT , Make : Supershine or equivalent in model in Stefab/Fabcare

External Electric Supply

Supply and lay cable XLPE insulated armored (heavy duty) electric power cables 1100 volts grade with aluminium conductor of size 185 sqmm 3.5 core complete all as specified and directed.

Supply and fix for DWC high density polyethylene pipes having outer side wall corrugated and inner surface plain confirming to IS 14930 (Part-I & II) for protection of underground cable laid in trenches/floor/fixed on pole/wall including all fittings(coupler) and clamps as required complete all as specified and directed. following inner dia of size 50mm complete all as specified and directed

Excavation in trenches not exceeding 1.5 m width and not exc 1.5m in depth getting out in hard/dense soil complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in thick using excavated hard/dense soil/soft rock complete all as specified and directed

Removal of surplus soil/soft rock to a distance not exceeding 50 m and depositing where directed complete all as specified and directed

External Water Supply

Supply and laying GI tubing with all fittings such as nipple,bend,elbow,union etc laid in trenches for GI tubing 50 mm dia medium grade complete all as specified and directed

Supply and laying GI tubing with all fittings such as nipple,bend,elbow,union etc laid in trenches for GI tubing 25 mm dia medium grade complete all as specified and directed

Excavating in trenches n exe 1.5 m wide and not exceeding 1.5m in depth for removing and laying G.I tubing and getting out in soft/ disintigrated rock complete all as specified and directed

Supply and Fixing Gun metal Globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed in 50 mm dia pipe complete all as specified and directed

Supply and Fixing Gun metal Globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed in 25mm dia pipe complete all as specified and directed

M/L for Cutting the existing GI/CPVC pipe of 50 mm dia and connecting the new pipe line for pressure booster including all joints complete all as specified and directed