Military Engineer Services Tender

SCHEDULE "A" PART-IV (INTERNAL ELECTRIC SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-V (ROAD/ PATH/ CULVERT/ HARDSTANDING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VI (SEWAGE DISPOSAL) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VII (AREA DRAINAGE) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-VIII (EXTERNAL WATER SUPPLY) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-IX (EXTERNAL ELECTRIFICATION) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART-X (FIRE FIGHTING) Details of prepriced Schedule is given in tender documents.

SCHEDULE "A" PART -XIII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

INTERNAL WATER SUPPLY S & F Angular stop cock 15 mm dia, quarter turn Make – Jaquar model No CQT-23059

S & F Two way bib top/ angle cock 15mm dia. Make – Jaquar model No CQT-23041 or equivalent

S & F Health faucet with flexible pipe (ABS Body) with 01 meter long PVC tube & wall hook Make: Jaquar model No ALD-chr-573 or equivalent

S & F bib cock 15mm dia. Make – Jaquar model No CQT-23037 or equivalent

INTERNAL ELECTRIC SUPPLY: S & F modular type bell ding dong of 2 module size, conforming to IS: 8884- 1978 complete all as specified and directed. Make: Legrand Arteor Cat-Part No. 5734 43 or equivalent model of ABB (snieo) / L&T (Entice) / Wipro

S & F 20 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S & F 10 W surface/wall mounted LED batten having high efficiency long life LED chips with luminous efficacy of 100 lumen/W, independent isolated SMPS based constant current electronic LED driver with THD 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing and white coloured ABS end caps having input voltage 220- 240 V, input frequency 50- 60 Hz, PF 0.95, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed.

S & F 20/25 W LED street light having high efficiency long life LED module with SMD LED package mounted on MCPCB with high LED efficacy of ≥ 100 lumen/W, integral SMPS based constant current electronic LED driver with THD 20%, surge voltage protection and other safety tests as per IS: 15885 (Part-2/Sec-13): 2012, IP 66 protection, high effiency polycarbonate cover with integrated lens housed in pressure die-cast aluminium alloy heat sink for effective thermal management, sturdiness, excellent corrosion resistance, separate optical and control gear compartment & top opening for easy maintenance, suitable for side entry, pole mounting with bracket 1.5 m long with including necessary electrical connection to the fixture with 3 core flexible Cu conductor cable of appropriate size and light grade GI pipe 20mm dia, including GI clamps, nuts, bolts & washers with two coats of synthetic enemal paint over a coat of red oxide primer complete all as specified and directed. Make: BAJAJ Cat-Part No. BAJAJ 169829 BCLST 20W LED I or equivalent model of Havells, Philips or Wipro

S & F BEE five star rated energy efficient high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a downroad of suitable size and electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed. Make: Crompton Cat-Part No. ENTRUST50 or Havells Cat- Part No. ES-50 or equivalent model of Usha or BAJAJ

S & F engery efficient non-metalic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. VENTILUS 10" or equivalent model of Usha, Havells or BAJAJ

S & F engery efficient metalic exhaust fan having blade sweep 300 mm, air delivery not less than 900 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Crompton Cat-Part No. TRANS AIR 12" or equivalent model of Usha, Havells or BAJAJ

S & F MCB for AC applications conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, biconnect IP 20 protected lower terminals and sliding shutters, etc. complete all as specified and directed by engineer-in-charge.

6A, SP, MCB C-curve

16A, SP, MCB C-curve

20A, SP, MCB C-curve

External Water Supply: M&L for taking water connection from the delivery line of existing monoblock pump with suitable size of bend ,tee ,NRV and valve etc as directed by Engineer-in charge.

Construction of valve chamber with inner clear dimension 600 x 600 x 900mm suitable for 80mm sluice Valves with PCC (1:4:8) 150mm thick type D2 for foundation, Brick masonary 230mm wall in CM (1:4), PCC (1:2:4) 75mm type B1 for coping, rendering in CM (1:4) 15mm thick including provisiion of 3mm thick MS sheet cover and 25 x 25 x 3mm angle frame embeded in coping with two coats of synthetic enamel paint over a coat of red oxide primer with locking arrangements including necessary earth work complete all as specified and directed by Engr-in-charge

External Electric Supply: Supply, laying & testing PVC insulated, PVC sheathed cable, copper conductor flexible industrial cable of size 2.5 sq mm ,2 core, 1100 Volts grade.

Supply/Fix ,test commissioning of LT weather proof panel board powder coated outdoor type double door shutter type made out of CRCA sheet 3mm thick outer and 1.6mm for inner door confirming to IS 8623 with MS angle iron 50x50x6mm floor mounting type with enclosed bus bar chamber and with aluminium bus bar of cap 200 Amp with necessary insulator suitable for 3 phase, 4 wire, 50 Hz AC supply as per CPRI approved including provn of digital ammeter 0-50A, digital voltemeter 0-500Volts, CT's of suitable ratio,LED indicator lamps R-Y-B,selector switches and internal wiring including making PCC block type 0.60 Mtr above ground level grouting etc all as specified and directed with including following items , including provision of suitable size of cable glands,cable lugs,nut,bolts,washers etc.The bottom poration of enclosure shall be minimum 60 cm above ground level of legs of angle iron (a) One set of Al bus bar suitable of 200 A Phase and 100 A neutral (b) MCCB 4 pole 125 Amps,25 KA- 01 (Incoming) (c) MCCB 4 pole 63 Amps,25 KA - 02 No (01Outgoing & 01 spare) (d) MCCB 4 pole 32 Amps,25 KA - 02 No (d) MCB TPN 16 Amps - 02 Nos (for street light ) (g) Multifunction meter , R-Y-B indicator , volt meter & Ameter

Supply/Fix ,test commissioning of LT weather proof panel board powder coated outdoor type double door shutter type made out of CRCA sheet 3mm thick outer and 1.6mm for inner door confirming to IS 8623 with MS angle iron 50x50x6mm floor mounting type with enclosed bus bar chamber and with aluminium bus bar of cap 100 Amp with necessary insulator suitable for 3 phase, 4 wire, 50 Hz AC supply as per CPRI approved including provn of digital ammeter 0-50A, digital voltemeter 0-500Volts, CT's of suitable ratio,LED indicator lamps R-Y-B,selector switches and internal wiring including making PCC block type 0.60 Mtr above ground level grouting etc all as specified and directed with including following items , including provision of suitable size of cable glands,cable lugs,nut,bolts,washers etc.The bottom poration of enclosure shall be minimum 60 cm above ground level of legs of angle iron (a) One set of Al bus bar suitable of 100 A Phase and 100 A neutral (b) MCCB 4 pole 63 Amps,25 KA- 01 (Incoming) (c) MCCB 4 pole 32 Amps,25 KA - 02 No (d) Multifunction meter , R-Y-B indicator , volt meter & Ammeter

Supply ,install , testing and errection complete Hot dip galvanized IRON octagonal pole 8 metre long with Double arm bracket of size 1 mtr. with 40 mm dia of GI pipe and 15 degree arm tilt suitable for wind speed up to 47 m/s, junction box. Dimension top 70mm and bottom 133mm, 3mm thickness, base plate 200 x 200 x16mm as per BSEN ISO 146, with foundation bolts of M24x750mm 'J' EN8 grade bolt with nut and washer with MS template all as specified. Including finial and necessary Civil works like RCC/PCC foundation earthwork etc complete Including provisin of Pipe for cable entry /exit to the pole complete all as specified and directed. Make: BAJAJ CAT NO BOP-8030 or similar in make as mentioned in Particular Specification. Design & drawing of foundation / pole shall be submitted from manufacturer for approval of Engineer-in-charge. (ii)Cost of all civil wks/ fdn wks for fixing poles shall deem to be included in this item rate quoted by bidders, No extra cost in this regard shall be entertained in future.

FIRE FIGHTING: Supply,install ,test commissioning of LT weather proof panel board powder coated outdoor type double door shutter type made out of CRCA sheet 3mm thick outer and 1.6mm for inner door confirming to IS 8623 with MS angle iron 50x50x6mm floor mounting type with enclosed bus bar chamber and with aluminium bus bar of cap 200 Amp with necessary insulator suitable for 3 phase, 4 wire, 50 Hz AC supply as per CPRI approved including provn of digital ammeter 0-50A, digital voltemeter 0-500Volts, CT's of suitable ratio,LED indicator lamps R-Y-B,selector switches and internal wiring making PCC block type 0.60 Mtr above ground level grouting etc all as specified and directed with including following items , including provision of suitable size of cable glands,cable lugs,nut,bolts,washers etc.The bottom poration of enclosure shall be minimum 60 cm above ground level of legs of angle iron (a) MCCB TPN 63 Amps 25 KA as incoming -1 No (b) MCB TPN 40 Amps - 2 Nos (c ) Digital Voltmeter/ Ammeter (e) Star Delta starter of capacity upto 12.5 HP - 01 No (f) LED Phase indicating lamps R, Y, B - 1 Set

Supply and fix Cast Iron Air Valves with single air Outlets, conforming to IS 14845 of size 50 mm dia bore and fixing up in Cast Iron Water supply mains of size 50 mm dia.

Supply, laying & testing PVC insulated, PVC sheathed cable galvanized steel strip or wire armoured, electric control cables (Heavy duty) with stranded copper conductor of size 1100 Volts grade. (a) 3 Core, 1.5 Sq mm,

(b) 6 Core, 1.5 Sq mm,

Supply, Installation,Testing & commissioning of DRY CHEMICAL POWDER (ABC) stored pressure type fire extinguisher of 6 Kg confirm to IS : 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets.

Supply, Installation,Testing & commissioning of Carbon Dioxide (Co2) type fire extinguisher of 4.5 Kg confirm to IS : 15683, with ISI marked/TAC approved fitted with required accessories including wall suspension brackets.

Supply and installation at approved location approved make Fire sand bucket of 24 gauge galvanized steel sheet, each set shall have 4 buckets with stand & Showel etc, complete.

Earthing complete with galvanized iron earth plate electrode 600x600 x6.0mm thick buried directly in ground( earth pit not less than2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level ,connected to galvanized iron strip of size 32x6 mm as earthing lead by means of nuts and bolts check nuts and washers of galvanized iron connected to test point, GI tubing 40mm bore medium grade protection pipe, GI watering pipe 20mm bore medium grade with funnel and wire mesh, charcoal and salt,Ci cover with suitable handle,PCC pit 1:2:4 including earth work in any type of soil and connecting to earthing test point/panel and testig on completion all as shown on electrical plate No -3 of SSR 2009- Part 1.