Military Engineer Services Tender

M&L for preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer (paving bitumen grade VG-30) @ 5 kg/ 10 Sqm complete all as specified and directed.

M & L for Semi Dense Asphalt Concrete 40 mm (consolidated) thick using graded crushed stone chipping as specified and paving bitumen binder VG-30 with 5.5% (minimum as per SSR Part-I) by weight of total mix (the exact quantity of binder shall be determined by design mix by marshal method) including loading of aggregate in hot mix plant 20 to 40 TPH transporting the mixed material with tipper and laying with mechanical paver finisher 30 to 40 TPH to the required level and gradient, rolling with 8-12 ton power roller as specified and compacted to required camber and gradient etc complete all as specified and as directed. Note:-(i) Contractor shall submit the authenticated weigh batch receipt as per load material in site duly marked vehicle number (ii) The binder content shall be specified in relevant item of Schedule ‘A’ by weight of total mix for semi dense bituminous concrete. In case of quantity of binder as per job mix formula works out to be more the 4.5% of weight of total mix extra quantity shall be provided by contractor without any extra cost of the Government.

Screening Road metal, chippings,etc on site of work, when specailly ordered, incl removing screened materials clear of screen and stacking in separate heaps for measuring (materials from both sides of screen measured).

Supply and fixing of dual directional reflective cat eye with two stand of impact resistant plastic 100mm x 80mm x 20 mm ultra violet resistant yellow colour having micro prismatic/cube corner reflectors suitable for fixing with 2 steel zinc plated 12 x 120 mm nails and epoxy/bitumen adhesive complete all as specified and as directed.

S&F in repair of solar - powered environment friendly,LED based Road stud made of aluminium-aloy shell, 100% waterproof design according to IP 65, dimention of 125mm x 125mm x 25 mm (Shank 60mm), High efficiency Mono-crystalline Solar Panel 2.4V/0.3 watt, One Ni-Mh or NL-cd rechargeable battery (1.2V/1600 MA), Six super bright LEDs with 10,000 to 18,000 mcd (Millicandela), View distance : upto 1000 Meters , Flash rate : 2Hz, Bearable Weight : 10 Tons approx, working time for 3 to 4 days provided at site as per manufacturer's instructions .

M&L for 1.5 mm thick painting to road surfaces as in lines, dashes, arrows, letters, zebra crossing etc on roads, pavements and like with thermoplastic road marking paint and applying glass beads @ 300 gms/Sqm over painted surfaces while the painting surfaces are hot by mechanical means including cleaning surfaces complete all as specified and directed.

S & F delinators DA 952 GP SBS round body fitted with two 100 mm dia highly reflective reflectors made of PMMA and mounted on MS pipe of 50 mm dia duly powder coated antirusted and anti theft steel net.

M & L for two coat of floor painting to cement tile floor withtile guard complete all as specified and as directed

M & L for two coat of synthetic enamel paint on old painted concrete surface of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and as directed

S&F in repair for factory made kerb stone using PCC 1:2:4 type B1 using 20mm graded stone aggregate of size 450mm300mmx150mm and set and jointed in CM 1:3 inclunding neccesarry exacavation and returning filling,complete as all aspecified and directed by engr-in cherge

M & L for two coat of synthetic enamel paint over the primer on new plaster/concrete surface of any description not otherwise described over 10 cm width or girth including preparation of surfaces complete all as specified and as directed