Military Engineer Services Tender

All as per serial item No.1 here-in-before but capacity 33,000 gallons complete at New Leading P/H/Acharya PH)

All as per serial item No.1 here-in-before but capacity 50,000 gallons (at BMF P/H, Mangor P/H, New Varunapuri P/H, Nofra P/H, 404 P/H, Trishul PH/Raksha PH, MAP Ph II

All as per serial item No.1 here-in-before but capacity 1,50,000 gallons complete at Nofra-2, BMF P/H-01.

All as per serial item No.1 here-in-before but capacity 4,50,000 gallons complete at Nofra.

M & L for disconnecting and stopping of incoming and outgoing pipes by means of hesian cloth to avoid choking of distribution pipe lines, removing complete water from the over head tank cleaning of over head tanks upto 18 mtr of staging (Height of OH Tank) of capacity 1,00,000 gallons (at Varunapuri P/H & BMF P/H - 01 No each) including writing (date of cleaning, capacity of tank) on over head tank pillar with synthetic enamel paint, scrapping of old rusted surface of pipeline (Rising Main, Distribution and Wash out) and painting with one coat of red oxide and applying two coat of synthetic enamel paint (Black, Red and Blue colour) after cleaning of steel surface of pipes complete all as specified and as directed comprising of pre operations mentioned below:- (a) In the first step dewatering of the tank shall be carried out by opening drain out valve. (b) In the second step, removal of left over dirty water and sludge with suitable sludge removal pump shall be carried out. c) In the third step, cleaning of internal walls and floors of overhead tank shall be carried out by high jet pressure machine and bleaching powder, and ensured that no dirt, sludge or moss remain on surface of the OH tank. (d) In the fourth step, the remaining sludge shall be removed from the floor with the help of industrial vaccum cleaner.

All as per serial item No.8 above but over head water tank upto 18 mtr of staging (Height of OH Tank) of capacity 75,000 gallons complete at BMF Pump House.

All as per serial item No.8 above but over head water tank upto 18 mtr of staging (Height of OH Tank) of capacity 50,000 gallons complete at Nofra, BMF Pump House and New Leading Qtr 's.

All as per serial item No.8 above but over head water tank upto 18 mtr of staging (Height of OH Tank) of capacity 5,000 gallons complete at NAY(G) parade ground.

Desluding/dewatering of under ground sewage sump 1 lakh litres capacity at Varunapuri gate - sewage pump house, by sewage disposal vehicle upto Approx. depth 15 Mtrs from ground level complete, including working under foul condition and taking out sludge, mud, garbage, cloth pieces and any impurities of any thickness complete from the bottom of the sump or solid waste (silt) in any proportion and silted soil from the existing underground sewage sump. Removing the sludge to a distance not exceeding 2.0 Km by a vaccum tanker (sewage disposal vehicle) out side of MOD land and deposited the same where directed by Engineer-in-Charge. Cleaning the surrounding wall with bleaching powder complete all as specified and as directed. Note: (i) Sewage disposal vehicle should be equipped with a high pressure super shocker machine. (ii) Necessary Items such as suction pipe, clamps and other T&P related works should be provided by the contractor without any extra cost. (iii) Rates of painting of GI weld mesh provided on top of the sewage tank and MS channel support 02 Nos are included in the unit quoted rates and not any claim entertained at later stage.

M&L for cutting of shrubs and bushes including surface dressing not exceeding 15cm deep in soft / loose soil including cutting and removal of unwanted grass hard / dense article / small trees and ramming and watering after leveling of complete surrounding area of pump house bldg inside of perimeter wall complete all as specified and as directed.

Excavation in trenches n.exc 1.5M wide & n.exc 1.5m in depth for laying and getting out in hard/dense soil complete all as specified and as directed.

All as per Item No.14 above but in soft disintegrated rock complete all as specified and as directed.

Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any strata complete all as specified and as directed.

Removing excavated soil to a distance n.exc 50m, depositing where directed at a level n.exc 1.5M above the starting point complete all as specified and as directed.

M & L for dry river sand/ M-sand as in sand cushioning for underground PVC cable protection including punning down sand in layers all as specified and as directed

Supply and lay reinforced precast concrete cable covers, class LV, type- I flat, size 250x150x40mm, all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out in hard dense soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm all as specified and as directed

M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) in foundation for concrete encasing the pipe / pole upto GL complete all as specified and as directed.

M&L for providing PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) for plinth block/collar above GL 450mm high and 450mm dia complete all as specified and as directed.

Supplying, laying, commissioning, jointing & testing 2 core 10 Sqmm, XLPE cable insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor including taking down existing cable complete all as specified and as directed. Make:- Havells India, Kalinga premium, Gloster. Note: Excavation & earth work, sand cushioning & Bricks shall be measured & paid separately under respective item of BOQ.

S & F in repair PVC insulated & FR PVC round sheathed copper conductor multi core round (flexible) industrial cable 1100 volt with bright annealed electrolytic bare copper conductor for voltage 1100 volts grade of size 2.5 sqmm, 2 core confirming to IS-694-1990 from junction box to light fittings and locking arrangement complete all as directed.

M & L in repair GI tubing, light grade complete to PTL fittings, walls and ceilings or laid in floors of size 50 mm dia including taking out old unserviceable pipe complete all as specified and as directed.

S & F GI tubing, medium grade of size 50 mm dia for fixing Solar street light fittings including taking out old unserviceable pipe complete all as specified and as directed.

S&F in replacement Decorative LED Post Top fitting for 360 degree indirect light of capacity 35W with IP- 65 protection, energy saving and resistant to impact and corrosion, glare free and better uniformity including taking down old unserviceable fittings complete all as specified and as directed.

S & F SMC DB box suitable for connecting upto 16 sqmm 4 core cable alongwith glands, rings & lugs of suitable size connector fixed on existing pole with clamp, nut & bolt for connecting light fittings supply terminal through 6 Amps single pole complete all as specified and as directed.

S&F for sheet metal enclousre for MCB DB's SPN, 4 way, single door, 240 Volts with 200 Amp rated bus bars including connection of incoming/ outgoing cable through suitable size of lugs complete all as specified and as directed.

S&F in repair MCB SPN 32 Amp, 240 volts 10 KA 'B' series' complete all as specified and as directed.

M&L for painting of panel board with one coat of synthetic enamel paint including preparation of the existing surface including scratching of old paint wherever required , rubbing & cleaning of the greasy spot by means of kerosene oil or other suitable chemical with safety precaution & all disconnected electrical connections are connected and before painting shut down complete all as specified & directed.

S&F framed work such as grills, gratings, etc. with ends of barss shouldered and/ or riveted, or forged into spikes; framed guard bars; barred into doors; ladders; framed balusters; walk ways; railings; framework of water tanks staging and similar work conforming to Fe 290. Gde-E-165 complete all as specified and directed.

M&L for two coats of synthetic enamel paint over one coat of red oxide primer new surfaces of any description, over 10cm in width or girth, not otherwise described as specified.

S & F in repair smart solar street light 50 W with built in mono crystalline panel, lithium ion battery, MPPT charge controller and PIR sensor with colour temperature 6000 to 6500K alongwith connecting accessories like clamp, nut & bolts, etc complete all as specified and as directed.

S&F in repair LED aviation Light luminaires lighting comprising of aluminium housing with poly carbonate enclosure, 302 Nos LED and accessories complete all as specified and as directed.

S&F in repairs to single pointed air termination rod (copper) 12 mm dia 300 mm long along with all mounting accessories on top of OH reservoir of different staging at pump house as per relevant IS provision. (All the joints shall be properly revitted and brazed / welded) complete all as specified and as directed.

S & F in repair aluminium strip 25mm x 3mm burried in ground along column overhead reservoir on PVC shadles at 0.50 mtr apart up to the height of 30mtr complete all as directed.

S&F in repair PVC insulated & FR PVC round sheathed copper conductor multi core round (flexible) industrial cable 1100 volt with brightannealed electrolytic bare copper conductor for voltage 1100 volts grade of size 1.5 sqmm, 02 core confirming to IS-694-1990 making connection to water aviation obstruction light complete all as specified and directed.

S&F in repair, connect & test LED street light new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 LED street light fitting 90 watts on existing street light pole, all as specified and as directed.

M & L for construction of brick masonary valve pit chamber of size 900 mm x 900 mm x 900 mm (internal dimension) including necessary excavation and earthwork, PCC 1:4:8, brick work in cement motar 1:4, 12 mm thick rendering in cement mortar 1:4 on internal surface of valve pit and mild steel sheet cover 05mm thick and mild steel angle iron frame size 50mm x 50 mm x 06mm around of valve pit, locking arrangement with pad lock of size 50 mm brass, 6 leavers and key (make ; Godrej) complete including two coat of synthetic enamel over a coat red oxide primer on steel surface with preparation of surface and including dismantling of existing valve pit complete all as specified and as directed.

M&L Plate earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to GI strip 25x3.15mm any length as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel, including provision of GI pipe 50 mm bore medium grade of required length for protection of earthing lead, GI watering pipe 20mm bore medium grade with GI sheet funnel and wire mesh, PCC 1:3:6, type B-1chamber with 50 mm thick pre-cast RCC cover reinforced with 6 mm dia mild steel plain round bars spaced at 100 mm centres both ways with frame, filling the pit with charcoal & common salt surrounding the earth plate,including all necessary excavation & earth work in any type of soil all as shown in Electrical Plate No.3, connected to earthing test point including testing on completion complete all as specified and as directed.