Military Engineer Services Tender

S&F MCB SP 6-32A, 240 Volt 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.Complete all as specified and directed.

S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with double pole MCB 20 Amps complete all as specified and directed.

M&L for submain wiring with 1100 volt grade PVC insulated unsheathed multistranded two run of 4 Sqmm copper conductor cable conforming to IS 694 FRLSH drawn through and including rigid white/ivory colour PVC casing caping /conduit etc. Fixed on wall ceiling including provision of one run of 4 Sqmm PVC unsheathed copper conductor and connected to earth dolly complete all as specified and directed. Note - 02 run of 4 Sqmm, 01 run of 4 Sqmm as earth conductor and 01 run of PVC casing caping/counduit will be measured as one length.

Supply and erection and Fixing Hot dip galvanised (HDG) Octagonal pole 7.0 mtr length, bottom dia 130mm and top dia 70mm, pole shaft thickness 3mm, base plate minimum 200 x 200 x 12mm, hole dimension 24x32mm, with single arm bracket of length 1500mm and 04 nos foundation bolt EN8 grade of size M20 x 600 mm J type. Complete all as specified and directed.

Supply and fixing 50W Solar all in one comprising of high efficancy LEDs. Lm /watt) efficient minimum 48Wp (0/+ Watt) Monocrystalline Solar Panel new age 24Ah (B/S certified) 12.8 V Lithium ferro phosphate battery, correlated color temp range 6000K+/- 500K operating temp range 0 to 45 degree Celcius and beam angle 135 degree x 85 degree, sllicon encaapsulated high effeciency MPPT charge controller, uniquely disgned Aluminum housing for better heat dissipation & stratefically placed perforations allowing natural air passive cirulation within & into the housing for improved thermal management of internal components, lngress protection IP-65 and impact protection IK-06, comfiriming as per IS 16107 Part-2 and solar light pole dia in 50-100mm or suitable for fixing to arm bracket of octagonal pole Complete all as specified and as directed. Note: Warranty period for Luminaires should be minimum two years and contractor provide the warranty certificate for Luminaires should be minimum two years and contractor provide the warranty certificate from OEM to authorities. (ii) The charges for repair/ replacement of any parts during the warranty period to be bear by the contractor or OEM only.

Supply, laying, joining of Double Walled Corrugated Pipe (DWC) as UG Cable Protection of size 40mm. Complete all as specified and Directed.

Supply, joining of Snap Fit Coupler for Double Walled Corrugated Pipe (DWC) as UG Cable Protection of size 40mm. Complete all as specified and Directed.

Excavation in Trenches n.exe 1.5 m deep and n.exe 1.5 m wide and getting out in soft disintegrated rock/laterite Rock.Complete all as specified and Directed.

Returning filling in excavated earth work including spreading, levelling, watering and well ramming in layers n.exe 25cm thick in any strata.Complete all as specified and Directed.

Removing excavated soil to a distance n.exe 50m, depositing where directed at a level n.exe1.5m above the starting point.Complete all as specified and Directed.

Supply, laying and testing cable XLPE Insulated,screened, PVC bedded, Galvanised steel strip or wire armoured, electric power cables(heavy duty) 1100 Volts grade with stranded aluminium conductor of size 6 sqmm 2 core. Complete all as specified and directed.