Military Engineer Services Tender

Supply and Fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, but lenth of bolt n exc 5cm long and diameter of neck 10mm complete all as specified and directed.

Supply only Chain link Fencing MS galvanised with PVC coated fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Material and Labour for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 grade-165. including pintle hinges, stops, hand-made sliding bolts, etc. and portions framed and hung as gates, including pintle hinges, stops, hand-made sliding boltsall complete all as specified directed.

Material and Labour two coats of synthetic enemel paints on new steel surfaces exc 10cm girth over a coat of red oxide complete all as specified and directed.

Supply and Fix Mild steel round bar bars 10mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. Fe 290 (Gde - E-165)

Material and Labour two coats of synthetic enemel paints on new steel surfaces Surfaces of any description, n.exc 10cm in width or girth over a coat of red when unconnected with other painting or when painted in a different tint complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft disintigrated rock complete all as specified and directed.

Material and Labour Cement concrete type D-2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Material and Labour Pre-cast cement concrete Type C-1, 1:3:6 (20mm graded aggregate) block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specified as directed.

Material and Labour for Providing precast cement concrete Type C-1, 1:3:6 (20mm graded aggregate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:6 in walls complete all as specified directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing excavated soil not exceeding 50m and depositing where directed to a level n exc 1.50M above the starting point in rocks complete all as specified and directed.

Material and Labour cement plaster 15 mm thick on other than fair faces of brick work with C M 1:4 or concrete surfaces finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L for preparing new plastered surfaces of wall by brooming down or steel wire brushing, scraping down moss and efflorescent salt etc and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including one coat of Chalk Whiting on cloth or hessian priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.

Supply and Fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and Fix Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and directed. (each line wire to be measured)

Material and Labour for hardcore of guage n exc 63mm deposited spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface broken stone or boulders complete all as specified and directed.

Material and Labour for 75 mm thick Plain Cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base for flooring complete all as specified and directed.

Material and Labour for 40 mm thick Plain Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in flooring including finishing the surface even and smooth with using extra cement complete all as specified and directed.

Supply and fix LED street light 70W IP 65 watt 230 V AC outdoor type with thermal management in mutiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp Complete all as specified and directed.

Supply and erection of 9.0 mtr long Hot dip glavanised Octagonal street light pole with arm top dia 70mm and bottom dia 155mm with sheet thickness not less than 4mm with base plate of size 250mm x 250mmx 16 mm and foundation bolt sets of size 04x20mm dia bolt length 700mm and projected bolt length 100mm with fixing of bracket for street light light fittings mounting of pole, necessary foundation with cement conrete for erection of pole all standard accessories incl MCB SP 6 Amp- 01 with connector and suitable mounting DIN rail arrangements etc Complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sa mm 4 core. Complete all as specified and directed.

Supply, laying and testing cable X;PE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3h core Complete all as specified and directed.

Supply/ Lay dry river sand in trenches for cable protection Complete all as specified and directed. Note Punned thickness only will be measured and Paid.

Supplying and laying reinforced precast concrete cable cover, class type 1 flat size 250 X 150 X 40 mm for cable protection Complete all as specified and directed.

Supply & laying Gl pipe light graded of size 50mm dia in trenches and fixing on wall / pole with help of suitable size MS clamp for cable protection Complete all as specified and directed.

Supply & Fix 40W Post Lamp, efficient Outdoor LED Luminaires New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDS as light source Aluminum housing, clear acrylic diffuser, cast aluminum pole-cap complete with acoessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size in MS conduit, Suitable for OD of ø75 mm pipe with GI Pipe Concealed for provision of Cables Complete all as specified and directed.

Material and Labour Submain wiring with 3 runs of single core 1.5 sgmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including PVC conduit marked and accessories concealed in wall/lceiling including 2 run of single core 1.5 sqmm PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring Complete all as specified and directed.

Supply, installation, testing and commissioning of LT Panel board CPRI APPROVED factory fabricated, TPN 415 Volts, 50 Hz, Bus bar of 200 Amps capacity placed horizontally throughout the width of Panel, outdoor cubical type floor mounted factory made double door dust and vermin proof fabricated out of CRCA sheet not less than 3.15 mm thick fixed on angle iron frame made out of 50x50x6 mm with height of legs is 0.75 m (0.3m under the ground) and 0.45m above ground with cable chamber for individual feeders for incoming and outgoing Connections, one set of LED indicator lamp RYB with switch and fuse, Voltmeter, Ammeter etc Complete all as specified and directed with the followings Accessories : INCOMING:- (a) Digital Voltmeter (0-500V)- 4' X4'. (b) Digital Ammeter (0-100A) - 4' X4'. (b) MCCB with fixed thermal and magnetic release, 4 pole, 63 AMPS, 50 Hz, 415 Volt, 16 KA OUTGOINGS:- (a) MCB, TPN, 40 Amps 'B' Curve, 50 Hz, 415 Volts -02 Nos. (b) SP MCBs 32 AMP 'B' Curve - 03 Nos. (c) Analog Time Switch with contactor for street lights - 01. Note:- (a) Design of Panel Shall be submitted to Engr-in-Charge for Taking approval before fabrication of panel. (b) All Termination of Cables should be provided with copper lugs/ thimble and suitable size of gland and rate for the same is deemed to be included.

Material and Labour for Earthing complete with galvanised steel earth plate electrode 60x60cm,x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, using galvanised iron strip 25 x 4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test pointComplete all as specified and directed including testing on completion.