Military Engineer Services Tender

S&F for Mild steel Butt hinges medium weight 75 mm in sizes complete all as specified and directed.

S&F Brass locks cupboard grade 1 size 50 mm 2 levers complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

S&F Powder coated of any colour alumininium( min thickness of powder coating not less than 50 micron) door shutters, of aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised anodised aluminium snap beading screws complete all as specified and directed.

S&F Powder coated aluminium (min thickness of powder coating 50 micron ) work for partitions (fixed portion) and similar work in doors, windows and ventilators with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS 733 and IS 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e at top, bottom and sides with required EPDM rubber/neprene gasket and other required necessary items. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, CP brass/stainless steel screws, all complete as per site requirement and directions of Engr-in-Charge.

S&F Sheet glass ordinary quality 4.8 mm n exc 0.5 Sqm in each pane. Sheet glass is grounded or obscurred or frosted on one side complete all as specified and directed.

S&F 2 mm thick Plain colour PVC sheet fixed or laid on to doors/partitions and similar work complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in required position with necessary items waste pipe etc and connecting union to pipe, overall size 495mmx420 mm bowl size 410 mm x 330 mmx160 mm complete all as specified and directed.

All as above Item No11 here-in-before but with drainage board overall sizes 915 mmx460 mm and bowl size 410mm x 330 mmx160 mm complete all as specified and directed.

Making good wall or floor tiling to match existing complete all as specified and directed

Making good wall or floor painted or distempered finish to match existing.

S&F fancy type bib taps 15mm bore chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes or brass ferrule and fixed complete all as specified and directed.

S&F fancy type 15 mm pillar taps, cast copper alloy with captan head chromium plated screwed down high pressure with or without lettered Hot and Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.

S&F Brass Chromium plated shower roses 125 mm with or without swivel joints complete all as specified and directed.

S&F wash basins vitreous China size 550x400 mm (Flat back or angle back type) including brackets and cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F wash basins vitreous China size 450x300 mm (Flat back or suitable for fixing in corners of wall) including brackets and cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe complete all as specified and directed.

S&F Steel water tubing medium grade galvanised of 15 mm bore with all necessary fittings and fixtures like tee, bend, reducers etc and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

All as above Item No 20 here-in-before but 20 mm bore dia

Cutting existing steel tubing 15/20 mm bore for alterations or additions complete all as specified and directed

Screwing existing steel tubing 15/20 mm bore pipe for alterations additions with necessary GI fittings ( or lengthing screw on pipe to form connector) complete all as specified and directed.

Demolition of precast concrete block walling including all quoins, arches etc above floors and pavings of any thickness (below or above ground level).

M&L Pre-cast cement concrete block masonry C-1 1:3:6 (20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in CM 1:6, complete all as specified and directed.

M & L for rendering 10mm thick in cm 1:4 on fair faces of concrete or brickwork finished even and fair without using extra cement

M & L for preparing new plastered surfaces of wall and applying 2 coats of oil bound distemper over a coat of primer with alkali resistant priming coat all as specified and directed.

Cement concrete type B-2 1:2:4 ( 40 mm graded aggregate) 100 mm thick as in floor/plateforms complete all as specified and directed.

M & L glazed ceramic coloured tile 450mmx300mmx6-7mm set & jointed in neat cement slurry and pointed in neat cement slurry and pointed in coloured cement to match over 10mm thick plastering in CM 1:4 as a backing coat complete all as specified and directed.

M & L Coloured non skid ceramic tile 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc set & jointed in neat cement slurry and pointed in white or coloured cement to match,including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply and fix stop valves, cast copper alloy 15 mm bore fancy type CP screwed down high pressure with crutch or butter fly handle for iron pipe or for union and complete fixed in repairs complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good with existing floor or wall finish tiles etc , cutting not exc 10 cm girth

S&F plain, solid straight chowkats and frames of 1st class softwood wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides with vision panels or peep holes, Square or rectangular as per site requirement. Complete all as specified and directed.

Supply and Fix Alu. Anodised barrel tower bolts 100mm long extruded section complete all as specified and directed.

S & F 100mm long Mild steel butt hinges medium weight complete all as specified and directed.

Suppy & Fix Alu. Anodised handle 150mm long extruded fabricated type complete all as specified and directed.

Supply and fix aluminium sliding door bolt with hasp & staple bolt type & fixing clips sheet cast of extruded section and fixing bolts 250mm size complete all as specified and directed.

Framed & fixing plain fillets square, rectangular or triangular in section clean sawn of sectional area exc 13 and n exc 25 Sqcm of 2nd class softwood comelete all as specified and directed.

S&F Boarding with nails in any situation like partitions/coverage clean sawn planed with both sides butt joints 30 mm thick complete all as specified and directed

Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc, 1.5 Sqm each complete all as specified and directed.

All as per Sl Item No. 41 here in before but exceeding 1.5 Sqm and not exceeding 4.00 Sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame)exc 1.5 Sqm and n exc 4.00 Sqm and refixing in other openings each complete all as specified and directed.

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M & L for RCC 1: 2:4 (nominal mix) type B0 , nominal mix with 12.5mm graded stone aggregates as in slabs, landings,lintels staging for water tank, slab supported on walls, beams and columns in floors, roofs landing, balconies, deck slabs and in shelves and the like including necessary formwork complete all as specified and directed.

M & L for TMT bars 10mm dia and over cut to length bent to shape reqd including cranking bending, spirally for hooping for columns, henking end and binding with and including MS wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Renewing tiles Glazed/floor in patches area n exc 5 Sqm including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.

S&F for collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles as specified and erected in position and securing runners with holdfasts and brackets complete.

S&F CPVC pipes SDR 11 & Plain CPVC SDR 11, 32mm dia fittings fixed complete to walls, ceilings or in floors etc with help of clamps or as required complete all as specified and directed.

Supply and fixing in CPVC pipe outer dia 32mm Brass Elbow

Supply and fixing in CPVC pipe outer dia 32mm Brass Tee

Supply and fixing in CPVC pipe outer dia 32mm Male Brass Threaded Adaptor (MTA/ MBTA)

Supply and fixing in CPVC 32mm Female Brass Threaded Adaptor (FTA/ FBTA)

Supply and fixing in CPVC 32mm union

Supply and fixing in CPVC 25mm Ball valve

Supply and fixing in CPVC 20mm Ball valve

Material and labour for Concealed point wiring for one light point controlled by one way switch complete with 1100 Volts grade 1.5 Sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable fixed/ drawn through PVC conduit including all conduit accessories/ fittings/ junction box/ inspection cover etc of heavy grade, ISI marked and with and including sunk terminal boxes of factory made 16 guage pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with all surface by means of brass screws and sunk/ cupwashers for mounting switches, sockets, regulators etc and providing one run of 1.5 sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable as earth continuity wire and connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed. (a) For one 5 Amp independent socket point controlled by one switch

Material and labour for Concealed point wiring for 15 Amp independent socket point controlled by one switch complete with 1100 Volts grade 2.50 Sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable fixed/ drawn through PVC conduit including all conduit accessories/ fittings/ junction box/ inspection cover etc of heavy grade, ISI marked and with and including sunk terminal boxes of factory made 16 guage pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with all surface by means of brass screws and sunk/ cupwashers for mounting switches, sockets, regulators etc and providing one run of 2.5 sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable as earth continuity wire and connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed.

Material and labour for concealed point wiring for 15 Amp independent socket point controlled by one switch complete with 1100 Volts grade 4.00 Sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable fixed/ drawn through PVC conduit including all counduit accessories/ fittings/ junction box/ inspection covers etc of heavy grade, ISI marked and with and including sunk terminal boxes of factory made 16 guage pressed steel housing, totally concealed in walls with 3 mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk/ cupwashers, for mounting of switches, sockets etcand fixing on wall including and providing one run of 4.00 sqmm PVC insulated unsheathed multistranded FRLS grade copper conductor cable as earth continuity wire and connecting to common earth and carrying out IR test for each circuit including making good the disturbed surface by cement mortar 1:3 and matching/ finishing surfaces by distemper/ colour wash as per existing colour surfaces over plaster of peris/ putti complete all as specified and directed.

Supply and fix switch modular, single pole, one way, 5Amps, 240 Volts, white finish complete all as specified

Supply and fix socket outlet, 5 pin, 5Amps, modular, white finish complete all as specified

Supply and fix switch socket combination, 2 in1, 3/5 pin, 5/15Amps, modular universal, 240 Volt, white finish complete all as specified

Material and labour for sub main wiring with two single core PVC-FR insulated unsheathed stranded copper conductor cable of size 4 Sqmmfixed/ drawn through and including heavy duty PVC conduit with accessories with one single core PVC-FR insulated unsheathed stranded copper conductor cable of size 4Sqmm as a continuous earth wire complete all as specified and directed. Note: Two single core cables and one run of earth copper conductor/ casing capping will be measured and paid as one unit length.

Material and labour for sub main wiring with two single core PVC-FR insulated unsheathed stranded copper conductor cable of size 6 Sqmm fixed/ drawn through and including heavy duty PVC conduit with accessories with one single core PVC-FR insulated unsheathed stranded copper conductor cable of size 6Sqmm as a continuous earth wire complete all as specified and directed. Note: Two single core cables and one run of earth copper conductor/ casing capping will be measured and paid as one unit length.

Supply and fix sheet metal single pole and neutral enclosure for 2 pole and earth metal plug and socket for incorporating 20amp SPN MCB with and including 20amp SPN MCB including removing the old one complete all as specified and directed.

S&F IP-42 protection distribution board, SPN 8 Way, 240 Volts, sheet steel, powder coated, double door system, fitted with two covers suitable for use on 240 V, 50 HZ, with 200 Amps rated bus bar, neutral link each bar and din rail complete all as specified and directed.

S & F sheet metal enclosure double door verical type for DB's when MCCBs to be used Triple pole & neutral 4 ways 415 volts with 200 Amps rated bus bar fixed sunk / flush to wall including MCCB 100 Amps as incommer complete all as specified and as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 63 Amps of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SP 6 to 32 Amps of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply, install, testing and commissioning Level 2, step down distribution transformer, 63 KVA copper wound outdoor type, 11/0.433 KVA 3 ph, 4 wire 50 cycles, Vector Group Dyn 11, naturally oil cooled type suitable for outdoor installation, connected delta on HV side and star on LV side with neutral brought out LT side with solid earthing system with off load tap changing switch on Ht side to vary secondary voltage in steps of 2.5% each with in limit and with standard accessories like oil temp with indicator for highest temp guage, silica gel, breather assembly, oil conservator tank with oil filling hole duly luged, with bare HV and LV bushing, CI roller wheel, lifting plugs, explosion vent, air relase plug, earthing terminals, oil drain valve of gun metal with plug , oil filter valve with plug, name rating and diagram plate, oil level indicator and arching horn set and other fittings/ accessories and for standard requirement first fill oil including connections complete, all as per IS: 2026 with & including Construction of platform for transformer of size 3.0 x 3.0 x 1.5 mtr with following specifications:- (a) Earth work in soft/loose soil. (b) 5 cm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as lean concrete in foundation. (c) Brick work with sub class 'B' brick built in cement mortar 1:4. (d) 75 mm thick PCC 1:2:4 type D2 using 20 mm graded aggregate over brick platform. (e) 15 mm thick plaster in CM 1:6 on brick masonary platform. (f) Stair case of brick masonary for easy access to the platform.

Supply, installation, connecting, testing and commissioning outdoor type 11 KV, 630 Amps, Extensible on both side, Outdoor Fixed Type (IP54), RMU (Ring main unit) 3-way comprising of 01 No 630 Amps, motorised operated Load Break Switch and VCB (Vaccume Circuit Breaker with SF-6), inside robotically /manually/ TIG welded stainless steel 304 (Non Ferrite Non Megnetic Grade) filled with SF6 gas at suitable pressure in accordance with the IEC 62271-103, tank having min thickness 2.5+0.5 mm having IP 67 Degree of Protection. The RMU tank shall provide full insulation, making the switchgear, insensitive to the environment with degrees of protection of IP67. The RMU shall be suitable for operations at a height up to 1000 meters above sea level and at 40 degree ambient temperature without any derating. RMU should be provided with internal busbars, as well as earthing busbars should be of copper, padlock provisions & complete with all accessories. The RMU shall be type tested for Internal arc test of 25kA/1 sec as per IEC62271-200. RMU shall be equipped with site replaceable bushing. The earthing busbar shall be provided inside each cable compartment for solid earthing of Cable sheilds. The outer enclosure main door should cover entire part of the switchgear including front cover and cable doors for providing complete IP 54 protection including raised foundation of suitable size, minimum 50 cm above and 01 meter below the natural ground levels all as per manufacture's drawing. The unit shall include the following with all necessary standard fitting as required at site.

(a) 01 No. Incoming Load Break Switch module should consist of following accessories :630A Load Break Switch module for making and breaking of fault current alongwith, Earth Switch of full making capacity, Short time current - 25KA/ 1 sec, Making Capacity - 50KA, Auxiliary contacts - 1NO + 1NC, Power frequency withstand voltage - 28KV, Impulse withstand voltage - 75KV, Nominal operating gas pressure - 1.3 (Minimum) Bar abs,Front cover mechanism - IP2X, Cable covers - 3X, Snap action mechanism for manual operation, Cable box for front termination of the cable suitable upto 3 core 95 Sqmm, 11 KV XLPE cable Right angle boots (push on type), Suitable site replaceable Cable bushings, Arc proof cable covers with self Interlocking mechanism with earth switch, Capacitive voltage indication fixed type system as per IEC61243, (i) -Impulse withstand voltage- 75kVP (an altitude1000 m above msl). (ii) SF6 Gas pressure indicator.(iii) -230V AC shunt Trip coil for external trip signal. (iv) Live cable indicating LEDs energised through capacitive voltage dividers. (v) All feeders of RMU shall be provided with multifunction meters having complete range of measurement including maximum demand and shall have serial port for communication. (vi) Metering compartment of RMU shall be provided with auxiliary transformer of suitable capacity to supply power to battery charger. (vii) Integral earthing switch with making switch. (viii) Emergency Trip Push Button. (ix) Transformer card for auxiliary protection. (x) RMU shall be provided with 3 core metering and protection CTs minimum ratio for protection CTs shall be 400-200-100/5/1, 5P10, 2.5 VA and and for metering CT shall be 200/5/1A Class 1, 2.5 VA. (xi) 12 V Battery with battery charger with suitable burden for motor operation. Input 230 V AC & Output 24 V DC. Note: LBS shall have 3 positions, open or disconnected, closed and earthed, and will be constructed in such a way that interlocking prevents unauthorized operations. Manual opening and closing will be driven by a fast-acting /snap action mechanism, independent of operator action. LBS and earth switch shall have a min of 1000 (M1) mechanical operations , 100 electrical operations at rated current and 5 nos operations ar rated SC current.

(b) 02 Nos Outgoing Breaker module should consist of following accessories: (i) 630A Vaccum Circuit Breaker module for making and breaking of fault current alongwith Earth Switch of full making capacity. VCB should be capabl to bear 40 dead short circuit operation. (ii) Short time current - 21KA/ 1 sec (iii) Making Capacity - 50KA (iv) Auxiliary contacts - 1NO + 1NC. (v) Power frequency withstand voltage - 28KV. (vi) Impulse withstand voltage - 75KV. (vii) Nominal operating gas pressure - 1.3(minimum) Bar abs (viii) Front cover mechanism - IP2X. (ix) Cable covers - 3X (x) Stored Enegry mechanism for Motor operation- 24VDC. (xi) Cable box for front termination of the cable suitable upto 3 core 95 Sqmm, 11 KV XLPE cable (xii) Right angle boots (push on type) (xiii) Self Powered Microprocessor based Relay (3 O/C & E/F) with standard settings.(xiv) Digital Multifunction meter (A, V, KW, KVA, F, PF) with RS 485 port type Rishabh/ Elmeasure.(xv) Suitable site replaceable Cable bushings. (xvi) Arc proof cable covers with self Interlocking mechanism between doors, earth switch, disconnector & VCB. (xvii)Capacitive voltage indication fixed type system. (xviii) Mechanical Indications for breaker ON, OFF, EARTH, TRIP, Spring Charged-Discharged.(xix) RMU shall be provided with 3 core metering and protection CTs minimum ratio for protection CTs shall be 400-200-100/5/1, 5P10, 2.5 VA and and for metering CT shall be 200/5/1A Class 1, 2.5 VA."

Supply, Lay & fix XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavyduty) with aluminium conductor, 11000 volts Earthed, grade cross sectional area 95 sq. mm 3 core.

Supply & Fix Cable jointing kit for 11 KV (Earthed) grade cable for indoor termination cold shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 sqmm.

Excavation in trenches not exceeding 1.5 m width and not exc 1.5 m in depth and getting out in hard/dense soil for removing/laying of UG cables / Pipes etc

Returning, filling including spreading leveling watering and well ramming in layers not exc 25 Cm thickness using excavated hard/dense soil.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point for soil

Sand filling under floors or in foundations including watering and consolidation

Supplying and laying reinforced precast concrete cable cover, class HV, type 1 with peak, size 300mm x l80mm x 40mm

Supplying and laying reinforced precast concrete cable cover, class LV, type 1, flat, size 250mm x 150mm x 40mm.

Supply and Fixing Galvanised iron light grade pipe ISI marked of size 80 mm bore for passing of cable fixed to wall poles or laid on trench complete and including fittings complete all as specified.

Design Fabricating, supply and errecting connecting and testing totally enclosed LT cubicle panel board 3 Phase 4 wire system outdoor double door front and back opening type, sloped canopy (Hood) on top extended 100 mm all arround, separate compartment for each control gear, cable alley, provision of knock out type plates for various sizes of cable up to 120 Sqmm 3.5 core in and out , incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3.15 mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour,built in industrial type locking arrangement on front and back , and pre wired with PVC insulated multi stranded copper conductor for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs, Panel mounted on Anle iron frame of 50 mm X 50 mm X 6 mm thick duly painted and embeded in PCC 1:3:6 45 CM below ground level and 15 Cm above ground level and consisting the following (a) Bus bar aluminium duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic, non combustible, track resistant high strength FRP insulators 200 Amps for phases and neural set of 4 for RYB &N set of 04 -01 set. (b) MCCB 4 Pole, 415 Volts, 50 Hz 160 Amps with adjustable type 25 KA - 01 Nos (in coming). (c) MCCB TPN 415 Volts 50 Hz 100 Amps 25 KA repturing capacity 02 (02 Nos as out goings 01 for MDC Block Main DB and 01 No as spare). (d) MCCB TPN 415 Volts 50 Hz 63 Amps 16 KA repturing capacity 01 (01 No as out going for AC Load) (e) Indicator LED Type for RYB set of 3 - 01 set. (f) Rotary type selector switch 2 position 240 V (g) Volt Meter 0 -500 Volt with selector for RYB&O. (h) Ampere meter 0-200 Amps with selector switch ct operated with ct Coil

Surface excavation n. exceeding 30 cm deep and averaging 15 cm deep and getting out in hard /dense soil in Transformer Yard complete all as directed. (6+3+6+3) X 0.3 = 5.4 Sqm

M & L for cement concrete in foundations, filling and mass concrete, PCC 1:3:6 type C2 (40 mm graded aggregate) complete all as specified and directed. (2.0 X 2.0 X 0.2 = 0.8 Cum

M&L PCC concrete block masonary with solid blocks exc 10 cm in width and setting in mortar complete in cement mortar 1:6 type B1 1:2:4 (20 mm graded aggregate) complete all as specified and directed. (04 Sides X 1.5 X 1.2 X 0.23) = 1.66 Cum)

M&L for rendering 15mm thick cement mortar 1:4 on fair faces of brick work or stone or concrete surfaces fiishing the surface even & smooth without using extra cement. (4 sides x 1.5 X 1.2 = 7.2 Sqm)

M & L for preperation of new plastered surface of external walls and applying 2 coats of cement base paint, over a coat of alkali resistant primer complete all as specified and directed.

M & L for 50 mm thick Cement Concrete type B-1 1:2:4 (20 mm graded aggregate) in coping and including weathering, slightly rounded or chamfered angles and throating, including necessary form work complete alla s specified and directed. (1.5 X 1.5 X 0.2 = 0.45 Cum)

Excavating in post holes( or similar holes) each n exceeding 0.5 cu.m, getting out ,returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm of surface in hard/dense soil for embeding fencing post.

M&L for providing plain cement concrete (1:2:4) type B2 using 20 mm graded aggregate as in lintel upto 1.5 m clear span, seasmic and other bands, plinth courses, parapets, railings, copings, bed plates, kerbs, water troughs and the like including necessary form work and demolition of old concrete of any description complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) including demolition of old brick work built in cement mortar complete all as specified and directed.

M & L for Cross arms, bracing, supports, clamps and back plate, fabricated from structural steel section including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as directed including two coats of synthetic enamel paint over a coat of red oxide primer, complete all as directed complete all as directed.

Supply only Chain link MS Galvanized fencing 50 mm Mesh in replacement of Unserviceable barbed wire. (6+3+6+3) X 2.1 = 37.8 Sqm X 5 Kgs = 189 Kgs

Fixing only chainlink fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire.

M&L for hard core of gauge not exc 40 mm deposited spread and levelled in layers not exc 15 cm watered and rammed to a true surface complete all as specified and directed. (6 X 3 X 0.15 CM = 2.7 Cum

Suppy & Lay and or fix XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sq. Mm X 3.5 Core.

M& L for Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead 32×6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion

M&L for disconnection of electrical connections carefully including AMF panel and shifting of 125 KVA silent DG Set from old location of Military Hospital at Panaji to new MH KLP by using crane and installation as directed including necessary transportation to Bambolim, re-connection of all electrical connections like cable/earthing etc including testing and commissioning all as specified and directed.