Military Engineer Services Tender

SCHEDULE "A" Part - IV (INTERNAL ELECTRIC SUPPLY) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" Part - V (REFRIGERATION AC & WATER COOLER) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" Part - VI (SEWAGE DISPOSAL) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" Part - VII (ROAD/ PATH/CULVERT/ HARDSTANDING) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" Part - VIII (EXTERNAL WATER SUPPLY) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" Part - IX (EXTERNAL ELECTRIFICATION) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" Part - X (STREET LIGHT) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" Part - XI (LIGHTEING PROTECTION) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" Part - XII (AREA DRAINAGE) Details of prepriced schedule is given in tender documents.

SCHEDULE "A" PART -XIII (MISCELLANIOUS ITEMS) Note:- This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col.' E ' signifies this fact only.

Internal Water Supply: S & F concealed stop cock, 15 mm dia with wall flange screwed both ends for iron pipe and fixed including all necessary fittings like CPVC Tee, nipple etc. complete all as specified and directed.

Internal Electric Supply: S & F BEE energy efficient BLDC high-speed ceiling fan having 1200 mm blade sweep, air-flow not less than 210 CMM, operating voltage 220-240 V and frequency 50 Hz, including a down road of suitable size and electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fan complete all as specified and directed.

S & F energy efficient non-metallic fresh air fan having blade sweep 250 mm, air delivery not less than 860 CMH, operating voltage 220-240 V and frequency 50 Hz, including electrical connection with 3 core flexible copper conductor cable of appropriate size from ceiling rose to the fresh-air fan complete all as specified and directed. Make: Havells or BAJAJ

S & F Vertical triple pole & neutral (VTPN), double door, 4-way metallic modular distribution board conforming to IEC 61439-3, suitable for flush / surface mounting with provision for FP MCCB as incomer and TPN/SP MCBs as outgoing, reversible metal door, 200 A copper busbar for each phase, fully insulated & shrouded neutral bar, earth bar, wiriest & cable ties for cable management, profited masking sheet, etc. having IK 09 & IP 43 protection complete all as specified and directed.

Supply and fix of CS mounted high intensity LED search light, long range, manually swivel in all direction, 250 w, beam range 700 meters, Single, LED Efficiency 140 Im/w, PF0.95, CCT 5500K-6500K, Optical grade PMMA/PC lens/reflector efficiency 95%, multiple circuit to avoid complete run-down, anti UV, narrow beam 5 degree, die cast LM6 body with air fins, powder coated, constant current, average lux at 5 meter 15000 with circle of approx 600 mm, working temp: -20 to +60 degree C, input Volt 150-270 V, 50 Hz. P.F. 0.95, IP-65, confirming to LM79/LM80 as per IS: 10322/ IS: 13383. The stand of this search light should be suitable for fixing on railing/platform of watch tower or other plain surface. It is made by steel and suitable for manual rotation of the light on the horizontally (more than 360 degree) and vertically (more than 45 degree) with provision of both locking arrangement at desired position etc. all as specified and directed. Make: Kalin, Cat Part No-CS-LRFLL25-PC25

REFRIGERATION AC & WATER COOLER Supply and fix Voltage stabilizer for automatic operation,single phase naturally air cooled indoor type ,Wall mounted type & designed for input variation between 170 V to 280 V with output voltage stabilized at 230 V with accuracy of ± 2.5% suitable for 1.5 Ton AC all as specified and directed.

S &F modular Box sheet metal including cover Plate with socket 3 pin, suitable for 25 Amps flush type universal including 25 amp C series MCB protected complete all as specified and directed.

Supply and fix factory fabricated mild steel stand suitable for installation of out door unit of split type air conditioner fixing arrangement with anchoring bolts on wall surface at suitable height as per site condition etc. all as specified and directed.

Supply and fix refrigerators, electric driven (single phase), capacity more than 195 litrs upto 310 litres, BEE 5 star rated all as specified and directed.

DG Set Supplying, installing, testing and commissioning, factory assembled silent Diesel Engine driven generator set, fully wired alternator AC to give an out put of 100 KVA continuously rating at a power factor 0.8 lagging, 3 phase 4 wire, 415 volts 50 Hz supply, 1500RPM, directly coupled with diesel engine liquid cooled mounted on common base frame complete with floor mounting fuel tank (service tank) of adequate capacity with fuel line & accessories, PCC foundation work as per manufacturer's instructions, vibration damper pads, control panel & other accessories etc and comprising of following. (A)Diesel Engine: Liquid cooled turbo charged with after cooler to deliver suitable BHP at 1500RPM under NTP conditions of BS 5514 and conforming to IS 10001/ 10002, DIN 6271 & ISO 3046 with an overload capacity of 10% for one hour in any 12 hours continuous operation with the following accessories:. Diesel engine of rated speed at full load electric start developing with system with radiator and including electronic governor control of class A1, engine control panel, lub oil pump, water pump, fuel tank, exhaust pipe with silencer and suitable for electric start with batteries of adequate capacity and suitable for alternator of specified capacity complete with fly wheel direct/flexible coupling and coupling guard complete (a) Radiator with blower fan or heat exchanger with guard. (b) Pipe coupling for engine cooling system piping. (c ) Corrosion inhibitor coolant (d) Paper element filters (i) Fuel filter, (ii) Lube oil filter, (iii) By pass (e) Fly wheel housing and fly wheel to suit alternator. (f) Engine bearing mechanism in fly wheel housing. (g) Shut off coil with safeties for LLOP/HWT/over speed. (h) Dry type air cleaners and vacuum indicators. (j) Residential silencers.

(k) Stainless steel exhaust flexible bellows (l) Motor driven priming pump. (m) Battery charging alternator. (n) Exhaust piping made out of STIC C class, MS pipe inclusive of all accessories and hardware, necessary supports scaffolding as per manufacturer's recommendations to sustain back pressure with rain cap. (o) Mineral wool insulation 2 inch thick suitable for 400 degree Celsius temperature cladded with aluminium sheet o 30 gauge for the entire length of exhaust pipe. (p) First fill of oil, coolant and diesel during commissioning and 12 hours testing. (q) Interconnecting copper cabling of adequate capacity batteries control. (r ) Fuel pipe class STIC 1" /1.5" /2" dia - 01 lot (s) Self starter 12 volts DC. (t) Electric operated electronic governor. (u) Fuel injection pump. (v) No of cylinders - 12 No VEE (w) Electronic instrument panel, complete with all accessories as per manufacturer's specifications displaying the following:- (i) 12V Battery, (ii) Water temperature, (iii) lubricating oil pressure. (iv) Engine speed -1500Rpm, (v) Engine hours, (vi) Frequency, (vii) Voltage (w) Safety control (Trip and indication). (i) High water temperature (ii) Low lube oil temperature (iii) Overspeed stop

(x) Base frame: Sturdy, fabricated welded construction, channel iron base frame (duly painted) for mounting engine and alternator as per manufacturer's design alonwith AVM pads. (y) Battery:-12 volts(1x12v Battery) DC, 180AH, maintenance free battery conforming to IS:14257 with leads & terminals (Make- Excide/Amron). (z) Fuel tank: 12 hrs. full load diesel storage capacity fuel tank with mounting brackets factory made of 5mm thick HR/MS sheet with level indicator fuel inlet, fuel outlet, air vent, drain plug, in let arrangement for diesel filling fro exterior canopy (without opening its panel) etc complete all as specified and directed. (aa) Isolator panel with 160 amp MCCB (ab) Auto logic panel for automatic stat (B) Alternator: Alternator suitable rated for 100 KVA, 0.8 pf , 415 volts, 3 phase, 4 wire, 50 Hz at 1500 RPM, self excited and self regulated with AVR brushless, screen protected, drip proof , insulation class-H, IP -23, voltage regulation grade - VG 3 self ventilated and conforming to BS: 5000 / IS: 4722 suitable for engine as mentioned here-in before, conformig to IS: 13364(part-1)Make: KOEL GREEN / stampford/crompten/kirloskar/Greaves (c) Acoustic Enclosure:- M & L for acoustic enclosure for the above 100 KVA DG set to reduce noise level to 75 dB measured at 1.0 meter distance for audible frequencies as per guide of Central Pollution Control Board and manufacturer's specification and comprising of following from authorised GOEMs of Gen Set manufacturer's specified :- (i) Sound insulation : 100mm thick Rock wool (Density 64 Kg/Cum). (ii) Outer body : 1.6mm thick CRCA (iii) Door : 1.6mm thick CRCA (iv) Base frame : ISMC 300 (v) Inside illumination : 1 No.- 1 x 18 watt LED fitting of make Phillips/ Bajaj/ Crompton.

(d) AMF Control panel:- Factory fabricated cubicle type, free standing, floor mounted, indoor type, IP-43, AMF control panel, provided with removable rear panels & hinged front panel for easy accessibility, fabricated out of not less than 2.0mm thick CRCA sheet including two coats of powder coated paint over a coat of red oxide primer etc and comprising of following: (e) AMF control circuit with 4 pole MCCB 160 Amps - 2 nos, with ultimate breaking capacity Icu-25 KA at 415 volts and microprocessor release conforming to IEC 60947 Part-I with breaking capacity Ics=Icu at 415 volts , thermal overload setting 70% to 100%, short circuit setting 5 to 10 times-02 Nos. for main supply & DG set supply with HRC back up fuse complete with all DC control relays/ Line voltage monitor (LVM) as per OEM specifications incorporating motorised stored energy operating Engine start, stop, three attempt starting facility and failure to start etc. (f) Digital load manager : Three phase 4 wire indicating V,I,PF, KVA, KW, F of Enercon make with serial communication port model No.EM6400 with class 1.0 accuracy meter or equivalent make suitable rating of CT per phase- one No. (iii) Indication lamp R, Y, B with 3 Nos. of 2A HRC fuses-10 sets. (iv) Bottom gland plate for incoming and outgoing cables. (v) Circuit diagram plate. Note :- DG set should be suitable as per CPCB -4 latest norm wef 01 July 2023 of National Clean Air programme (NACP) Act 1981.

EXTERNAL WATER SUPPLY Cutting of road, PCC surface base, PCC flooring, bituminus surface by using mechanical method or any type carefully without damaging to adjacent surfaces complete all as specified and directed.

M & L for construction of brick masonry valve chamber of size 900x900x1200 mm (internal dia) suitable for 80 mm dia sluice valve with necessary earthwork excavation, foundation in plain cement concrete 1:4:8 using 40 mm graded stone aggregate 75 mm thick in cement mortar, 15 mm thick plastering in cement mortar 1:6 on internal face upto botttom and outside plastering in cement mortar 1:6 up to 15 mm depth below ground level, 100 mm thick PCC coping in 1:2:4 type B1, finished even and smooth, 3 mm thick MS sheet cover fixed on 25x25x6mm thick angle iron frame work and bracing with locking arrangement and applying two coat of synthetic enamel paint including dismantling removing the existing damage chamber completely removal of debris to a distance not exceeding 50 mtr distance depositing where as directed by Engr - in- charge complete all as specified and directed.

EXTERNAL ELECTRIFICATION Supply and fix cable route indicator made of round CI disc embossed HT Cable, of size 20cm dia 6mm thick duly revited with angle of size 50x50x4mm and 60cm long including PCC 1:2:4 B2 using 20mm aggregate 15cm x 15cm x 15cm for grouting the same complete all as specified and directed.

Supply and fix cable route indicator made of round CI disc embossed LT Cable, of size 16cm dia 6mm thick duly revited with angle of size 50x50x4mm and 60cm long including PCC 1:2:4 B2 using 20mm aggregate 15cm x 15cm x 15cm for grouting the same complete all as specified and directed.

Supply,install, test and commission indoor LT feeder pillar box factory fabricated and CPRI approved cubicle outdoor type, 3 phase Aluminium busbar of capacity 300 Amps with powder coated weather and vermin proof floor mounted IP-54 protection class with 3.00 mm thick CRCA sheet with 50x50x6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrangements including necessary copper wiring to MCCB etc, cable glands, lugs making all requisite connections all as specified including the following:- a) MCCB TPN 200A ,25 KA- 01 No. (Incomer) b) MCCB TPN 160A , 25 KA- 01 Nos (Outgoing to AMF ) c) MCCB TPN 160 A 25 KA - 01 No. (Spare) d) MCCB TPN 63 A 25 KA - 02 No. (outgoing to APFC Panel) e) Digital Voltmeter 0-500V-01 No with selector switch-1 No f) Digital Ammeter 0-300 A with CTs and selector switch -01 No g)Phase Indication lamp showing R-Y-B phases.

Supply,install, test and commission indoor LT feeder pillar box factory fabricated and CPRI approved cubicle outdoor type, 3 phase Aluminium busbar of capacity 250 Amps with powder coated weather and vermin proof floor mounted IP-54 protection class with 3.00 mm thick CRCA sheet with 50x50x6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrangements including necessary copper wiring to MCCB etc including cable glands lugs making all requisite connections all as specified including the following:- a) MCCB TPN 160A , 25 KA- 01 Nos I/C b) MCCB TPN 125 A 25 KA - 03 No. (outgoing For AC DB & Lighting DB & spare) c) MCB TPN 32 A 10 KA - 01 No. (outgoing to St Lt) d) Astro Time switch for 3 phase 20A-1 No e) Digital Voltmeter 0-500V-01 No with selector switch-1 No f) Digital Ammeter 0-300 A with CTs and selector switch -01 No g)Phase Indication lamp showing R-Y-B phases. h) Power contactor 20 amps , with 230 coil

S&F PVC/FRP cable looping boxes of size 300 mm x 200 mm x 105 mm with TPN aluminium busbar and MCB SP 6 Amp- 01 No, 10 KA breaking capacity, C curve series, factory made with PVC sheet including heavy duty connector for connection of 4 core cable & fixed to pole with suitable size flat iron clamp, nuts & bolts complete all as specified and directed by Engr-in-Charge. Make :Sintex or as approved by GE

Supply,install, test and commission indoor LT feeder pillar box factory fabricated and CPRI approved cubicle outdoor type, 3 phase Aluminium busbar of capacity 150 Amps with powder coated weather and vermin proof floor mounted IP-54 protection class with 3.00 mm thick CRCA sheet with 50x50x6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrangements including necessary copper wiring to MCCB etc including cable glands lugs making all requisite connections all as specified including the following:- a) MCCB 4 Pole 125 Amps, 25KA - 01 No. (Incomer) b) MCCB 4 Pole 63 Amps, 25KA - 03 Nos (Outgoing) d) MCB TPN 32 A 10 KA - 02 No. e)Time switch for 3 phase 20A- 01 No f)Digital Voltmeter 0-500V-01 No with selector switch-1 No g) Digital Ammeter 0-100 A with CTs and selector switch -01 No h)Phase Indication lamp showing R-Y-B phases. Power contactor MR 13 , with 230 coil

Supply,install, test and commission indoor LT feeder pillar box factory fabricated and CPRI approved cubicle outdoor type, 3 phase Aluminium busbar of capacity 150 Amps with powder coated weather and vermin proof floor mounted IP-54 protection class with 3.00 mm thick CRCA sheet with 50x50x6mm angle iron frame with and including PCC 1:3:6 type C2 foundation and covering front and back opening hinged door along with suitable locking arrangements including necessary copper wiring to MCCB etc including cable glands lugs making all requisite connections all as specified including the following:- a) MCCB 4 Pole 63 Amps, 25KA - 01 No. (Incomer) b) MCB TPN 32 A 10 KA - 04 No. ( 2 for Building , 1 for St Lt & one Spare) d)Time switch for 3 phase 20A-1 No Power contactor MR 13 , with 230 coil e)Digital Voltmeter 0-500V-01 No with selector switch-1 No f) Digital Ammeter 0-800 A with CTs and selector switch -01 No g)Phase Indication lamp showing R-Y-B phases.

Addition & Alteration by cutting , welding and fabrication etc for making space for fixing of MCCB into existing feeder pillar box inclluding making incoming and outgoing electrical connections , making good to panel surface by painting with existing colour paint complete all as specified and directed.

Supply and fix LED type street light fitting 1x70 watts complete with LEDs and electronic driver and other accessories prewired and including suitable mounting bracket of GI pipe 40mm dia medium grade 1.5 mtrs long bent to shape MS flat iron clamps 32 x 4 with bolts nuts and washers etc MS clamps duly red oxide primer and over one coat of synthetic enamel paint and three core 2.5 sqmm PVC insulated copper conductor cable from looping box to fitting drawn through

SEWAGE DISPOSAL M & L for laying of DWCPE sewage pipes line 150 mm dia bore pipe sftiffness class SN 8 including sealimg of joints fittings etc complete with collers complete all as specified and directed.

M & L for septic tanks including excavation and earthwork complete in ordinary soil, PCC in foundation, brick work in CM 1:4, RCC slab covers including precast manhole cover having 6 mm plate embeded all around / fibre reinforced cover with angle iron frame vent shaft sludge chambers etc complete for 50 users all as specified and directed and as shown on drawing.

M&L for construction of 2.25 m dia x 2.50 m effective depth soakage well 50 user capacity excavation in soft/loose soil including filling of brick bats not exc 63 mm size complete as per drawing etc. complete.

M&L for construction of 1.60 m dia x 1.50 m effective depth soakage well 25 user capacity excavation in soft/loose soil including filling of brick bats not exc 63 mm size complete as per drawing etc. complete.

M&L for onsite LLDPE sepitc tank designed to carry sewage and sludge water including excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc. all complete for 10 users conventional type as specified and directed.