Military Engineer Services Tender

Returning / Filling in including spreading levelling watering & well ramming in layers n exc, 25 cm soft/dis integrated rock complete all as specified and directed.

Removing excavated surplus soft / disintegrated rock material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

Removing excavated meterial exc 250m and n exc 500m and depositing where directed at a level n exc 1.5 m above starting point in rocks out side the MD land complete all as specified and directed.

Constructing RCC UG sumps of capacity 2,50,000 litres in RCC M-30 mix design with free board of 2.5 m from OGL, including excavation in soft disintegrated rock, foundation concrete, raft, beams, side walls, top RCC roof slab with CI manhole covers including plaster and water proofing with 10 years warranty as per zonal specification including epoxy paint inside, refilling of earth and disposal of surplus earth within 250 m lead, including all piping connections, valves, ladder, ventilation shaft, plith protection, saucer drains with all fitting etc complete all as shown on drawing, as specified & directed.

M&L for cement concrete type D2 1:4:8 (40mm aggregate) in foundations filling and mass concrete etc complete as specified & as directed

M&L for laterite stone masonry walling of square rubble brought upto courses exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.

M&L for cement concrete type B1 1:2:4 (20mm graded aggregate) in coping complete all as specified and directed.

M & L for rendering 15mm thick CM (1:4) on fair faces of stone masonry surfaces, finished even and smooth using extra cement complete all as specified and directed..

M&L for broken stones as loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and directed.

M&L for broken stones as loose filling with aggregates of gauge 40 to 80 mm in soakage pits, soakage wells complete all as specified and directed.

M&L for broken stones as loose filling with aggregates of gauge 20 mm in soakage pits, soakage wells complete all as specified and directed.

M&L for Sand filling under floors or in foundation or in filter bed etc watering and consolidation complete all as specified and directed.

S&F nylon filter mesh 2.6 mm opening size 1/4 th inch complete all as specified and directed.

M&L for rough finished formwork for slab bottom complete all as specified and directed.

M&L for rough finished formwork for slab sides complete all as specified and directed.

M&L for M30 design mix concrete for RCC roof slab complete all as specified and directed.

Supply only integral water proofing compound

Providing precast cement concrete in precast slab Type B1 1:2:4 (1:2:4) (20mm graded aggregate) set in cement mortar 1:4 complete all as specified and directed.

M&L for CRS TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required including crancking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to TMT Bars complete all as specified and directed.

S&F Fe-410-W(Gde-E-250) quality- B rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc complete all as specified and directed.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M & L for precast RCC (1:2:4) type B-1 using 20mm graded aggregate as in cover slabs of manholes, open drains incl of formwork set in cement mortar 1:6 complete all as specified and directed. (Reinforcement shall be measured and paid separately)

M & L for laying of DWCPE sewage pipes line 150 mm dia bore pipe stiffness class SN 8 including sealing of joints fittings etc complete with collars complete all as specified and directed

M&L for borehole drilling 300 mm to 350 mm to insert 200 mm dia perforated casing pipe for percolation of rainwater to ground water table for recharging purpose below ground level in any kind of soil strata including hard stone/boulder including MS cap, MS flat iron clamps, reducing socket etc.complete all as specified and directed. ( Note :-Perforated casing pipe shall be measured and paid seperately)

S&F perforated/slotted Stainless steel pipe V- wire sceen pipe 1.0mm slot size 6.3 mm thickness as per IS code 8110-2019 connected as per highest specification and inserted in above drilled borehole and filled with pea gravel surrounding including provision required clamp arrangement to hold the pipe etc.(45 mtr in each borewell) complete all as specified and directed.

M & L for Vee-Wire Filter Screen Kit -6 inch X 12 inch X 0.5 Meter Length (SS 304) Make -Apollo Screen Size :- 6” X 12" X 0.5 Mtr MOC of End connection- MS Slot Size - 0.50 mm/0.75 mm Screen Length :-0.5 Mtr Total Filter Length With End Connections – 0.9Mtr used as per direction of Engg-in-charge

M&L for 200 mm bore dia reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M & L for PCC 1:4:8 type D2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 200 mm bore complete all as specified and directed.

S&F 80 to 100 mm dia half round UPVC gutter with all necessary clamps fittings and fixtures to bring down rain water from roof fixed to nearby support with welding or bolting all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including necessary fixtures like bends etc complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including necessary fixtures like bends etc complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) branch piece, single (single Y) equal or unequal complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) couplers complete all as specified and directed.

M&L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm not exceeding 50mm deep complete all as specified and directed.

M&L 100 mm thick cement concrete type B- 2, 1:2:4 (40mm graded aggregate)

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

S&F online filter for rainwater pipes with all necessary accessories etc complete all as specified and directed.

S&F sluice valve with flanged ends any pattern of dia range 100 to 150 mm complete all as specified and directed.

Supply, installation, testing and commissioninng of Openwell submersible pump, suitable for pumping water 780 -220 LPM discharge at Head range 30 -54 m head, IP 55, cast iron body with gun metal impellers including fixing of safety valve, pressure guage and priming valve etc direct coupled suitable for operation on 3 phase, 415 V, AC, 50 Hz and mounted on channel iron base frame including nut, bolts & washers etc. PCC foundation, foundation nuts, bolts & washer as per manufacturer's instructions all as specified & directed by Engr-in-charge.

Supply and laying Ductile iron pipes with spigot and socket ends centrifugally cast, Class K-9, in any length laid in trenches of size 80 mm dia Incuding rubbur Tytan joint all as specified and directed.

Supply and laid spigot/flanged/ socketed DI fittings such as bends (any type radius and angle), tapers, tees, collars & tail piece socket/flanged/spigot etc of size 80mm dia all as specified and directed.

Supply & Fixing CI sluice valve 80 mm bore with flanged both end PN-1.0 with MS spindle, gasket, nuts, bolts & washers etc confirming to IS: 781 all as specified & directed by Engr-in-charge.

Supply and fixing NRV flanged of class 1.6 PN reflux with bypass arrangement complete of size 80 mm dia all as specified & directed by Engr-in-charge.

Supply and lay pipe galvanized, “Heavy class”, including fittings, 80 mm dia (From pump to DI line) all as specified & directed by Engr-in-charge.

Supply, Installation, test and Commissioning CPRI APPROVED factory fabricated,Indoor type, LT panel board, made out of 2 mm thick CRCA Sheet single door with both side opening including Neoprene Rubber Gasket, suitable for 440 Volt 3 Phase 4 Wire System, including Danger Plate, Earthing Strip Point and Ventilation Louvers at Rear Side, Bottom detachable Gland Plate complete with suitable size Zinc Chromium Plated Nuts, Bolts and Washers, etc. and embedded with 50X50X6mm Mild Steel Angle Iron Frame and 750 mm above the Normal Ground Level complete with internal connection with suitable size of cable, cable lugs and cable glands PCC Foundation in Cement Concrete 1:3:6 (20 mm Graded Stone Aggregate) and Testing after Installation including complete all as specified and & directed by Engr-in-charge comprising of the following :– INCOMING:- (a) INCOMING MCCB 63 A 25 KA, 4 POLE , -01 No (b) Busbar TPN of size 100 apms - 1 set OUTGOINGS:- (a) MCB 3 POLE TPN 32 Amps,10 KA - 3 Nos (b) DOL Starter for 7.5 HP Pump set-2 Nos (c) Ammeter Class-1,digital pannal mounting type 96mmx96mm L&T cat no WDS301FCA00 including CT 50X5 Amps 3 nos & selector switch-4 nos (d) Voltmeter Class-1, digital pannal mounting type 96mmx96mm L&T CAT NO.WDS301FEV00 & selector switch - 1no (e) LED TYPE indicator lamp 1 set (set of three for R,Y,B) (f) Mini protecrion Relay 4-11 amp - 2 nos

M&L for masonry valve pit of size 600x600x900mm internal size complete with excavation in soft disintegrted rock, earth work and brick work in CM 1:6, 15mm thick plastering in CM 1:4 internally including 5mm thick MS Sheet cover and angle iron frame of suitable size and two coats of synthetic enamel paint over one coat of red oxide primer complete with locking arrangement complete all as specified .& directed by Engr-in-charge.

Supply and installation of fast earth electrode 3.0 mtr length size model F84, having two M S pipe one inside the other with proper not deep galvanished outer dia 88 mm and inner dia 48 mm and the cavity between the rod pipes is filled with ground resistance improment powder, sealed with both end the outer pipe of electrode should be zink coated, the electrode should burried directly in the ground by making boring of diameter 10'' with boaring machine highly conductive non magnetic and non corrives is to be connected with GI strip 25 X 3 mm of 2 to 3 mtr length to facilitet further connection to earth dolly and provision of earthing chamber in bricks wall size 45 x 45 x 15 cm an dhaving PCC cover of required size complete all as directed and all as per IS 3034 (1981)

M&L for GI wire 4mm dia complete all as directed

Supply and fix Copper strip 32mm x 6mm buried in ground complete all as specified & directed by Engr-in-charge.

S& F XLPE insulated armoured and pvc sheated heavy duty electric cable with aluminium conductor 1100 volt grade laid in tranches passing through pipes /ducts including testing complete of following cross sectional area and size Note- Rate shall be inclusive of cable gland & cable lugs 3.5 core 35 sqrmm. cable

S & F 3 core Flat submersible cable, copper conductor 1100 volt grade laid in tranches passing through pipes /ducts including testing complete of following cross sectional area and size Note- Rate shall be inclusive of cable gland & cable lugs 3 core 10 sqrmm. cable

Supply and laying DWC (Double wall Corrugated ) duct pipe outer dia 63 mm and inner dia 50 mm conforming IS 16205 (Part 24 ) for protection of electric cable complete all as specified and directed.