Goa Handicrafts Rural And Small Scale Industries Development Corporation Limited Tender

Accessible Signages and Specialised Accessibility retrofitting items

Parking Signage Design, supply, fabrication and fixing of SS 304, non glare Signage board (2 ft. x 2 ft.- 1 no.) for the accessible parking, as per the approved design and make, having 1.2 mm thick SS non glare approved colour base plate having the 'Universal Accessibility Symbol' and Upper case Sans Serif words of height 50mm engraved on it along with the equivalent word/s written in Hindi using Devnagri script of height 50mm. Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate. Signage to be installed at a height of 2100mm from the ground level using a post of MS hollow square section (50mm x 50mm) as per the installation procedure specified by the manufacturer and as per the drawing issued and up to the satisfaction of the engineer in charge.

Building entrance and Accessible entrance signage Design, supply, fabrication and fixing of SS 304, non glare multilingual Braille (raised domes) entrance signage (size 1 ft x 1 ft) as per the approved design and make,indicating the name of the building/ accessible entrance location. Having 1.2mm thick SS non glare approved colour base plate with the 'Universal Accessibility Symbol' and Upper case Sans Serif words of height 20mm engraved on it along with the equivalent word/ s written in Hindi using Devnagri script of height 20mm. Letters, words and symbols to be of the approved colour such that there is adequate visual contrast with the base plate having anodized aluminium strip comprising of Grade 1 Braille consisting of raised domes of 1.5 to 1.6mm dia. and spacing as per Braille standards given by GOI, to be die punched on reverse side and be raised 0.6 to 0.9mm above base plate.The signage to be installed at the specified location on the compound wall near the site entrance gate installed at a height of 1200 mm from the finished ground/ floor level, using the necessary hardware specified by the manufacturer and to be installed up to the satisfaction of the engineer in charge.