Software Tenders

Details: Only The Brand Specified Will Be Considered. When Stating "unit Price" On Bid Submissions, Vendors Are Required To Quote Pricings No More Than Four (4) Digit Positions After The Decimal Point. More Than 4 Digit Positions After The Decimal Point Will Be Rounded-off To The Fourth Position. This Procurement Is Subject To The Provisions Of The Canadian Free Trade Agreement And The Canada-european Union Comprehensive Economic And Trade Agreement. Adp Software Service New Brunswick Will Not Be Splitting The Contract; The Contract Will Be Awarded To The Vendor With The Lowest Extended Price Values From Item Line 1 Thru 5, Guaranteeing The Lowest Gross Total To Snb And Fulfilling All Other Tender Requirements. Vendors Must Be A Blackberry Authorized Reseller Of Products And Services In Canada. Snb Reserves The Right To Request Proof Of The Reseller's Authorization Before Signing The Contract. This Is A Tender Notice Only. In Order To Submit A Bid, You Must Obtain Official Tender Documents From The New Brunswick Opportunities Network, Another Authorized Tendering Service Or As Indicated In The Tender Notice. Solicitation Documents Will Be Provided In Either Of The Province Of New Brunswick's Two Official Languages; English Or French Upon Request. Instructions For Bid Submission 1. Effective April 15, 2020, Service New Brunswick Is No Longer Accepting Paper Bids, And The Central Tendering Branch Is Closed To The Public. Public Tender Openings Are No Longer Taking Place; However, Results Continue To Be Posted On Nbon. 2. Bids Will Only Be Accepted By Electronic Transmission As Follows: A. By E-bidding Through Nbon (when E-bidding Is Possible); Or B. By Fax To: (506) 444-4200 (fax To Dedicated Mailbox). Note: Proposals In Response To A Request For Proposals (rfp) Will Not Be Accepted By Fax; Or C. By Email To Nbbids@snb.ca Or Soumissionsnb@snb.ca (do Not Submit Bids To Any Other Email). Click Here Instructions For Bid Submission For Important Instructions On How To Submit Bids By Email. D. Please Refrain From Submitting Your Bid Through Multiple Electronic Channels To Avoid Duplicate Bids. 3. All Bids Must Be Properly Signed By An Authorized Person. A. For Bids Submitted By Email Or Fax: Typed Signatures (in Any Font) That Are Not On The Bid Itself (i.e. In The Body Of The Email Or On The Fax Cover Sheet) Will Not Be Accepted. 4. All Bids Must Be Legible, Properly Completed And Contain The Proper Solicitation Number. 5. The Proponent Is Solely Responsible For Ensuring That The Bid Submission In Its Entirety, Including All Attachments, Is Received Before Closing Date And Time As Indicated On The Solicitation Documents. A. The Proponent Bears All Risk Associated With Delivering Its Bid By Electronic Submission, Including But Not Limited To Delays In Transmission Between The Proponent's Computer And The Province's Electronic Mail System, Nbon Or Fax. B. The Date And Time Of Official Receipt Of The Bid Will Be The Time Of Receipt Recorded In The Nbon System (for E-bids) Or The Time Of Receipt In The Province's Electronic Mail System (for Fax And Email Bid Submissions). 6. All Bids Must Be Stated In Canadian Funds. Sales Taxes Should Not Be Included In The Unit, Extended Or Total Prices. 7. All Tenders Must Be F.o.b. Destination, Freight Prepaid. 8. This Invitation Is Being Conducted Under The Provisions Of The Procurement Act And Regulation 2014-93 As Of The Date Of The Issuance Of The Invitation. Direct Deposit The Province Of New Brunswick Is Now Using Direct Deposit As The Standard Method Of Issuing Payments. Suppliers Are Required To Provide Bank Account Information And An Email Address For The Notice Of Remittance. Please Send The Completed Direct Deposit Form To Service New Brunswick (e-mail Address And Mailing Address Are Indicated On The Form). Please Click On The Link Below To View The Direct Deposit Form. Https://www2.snb.ca/content/dam/snb/procurement/directdepositvirementdirect.pdf A Bidder Must Obtain Official Solicitation Documents From A Distribution Service, Authorized By The Minister Of Service New Brunswick, In Order To Submit A Bid. The Current Authorized Distribution Services Are The New Brunswick Opportunities Network (nbon) (operated By Service New Brunswick, Province Of Nb), Bidsalert (operated By Tendering Publications Ltd.) And Merx (operated By Mediagrif Interactive Technologies). Bids Should Be Submitted On The Official Bid Documents Obtained From These Authorized Distribution Services. The Province Of New Brunswick Reserves The Right To Negotiate Pricing, Value Added And Other Savings Opportunities With The Successful Proponent At Time Of Award And Throughout The Contract. All Suppliers Engaged To Deliver Services On Behalf Of The Government Of New Brunswick Must Ensure Compliance With The Official Languages Act In The Delivery Of Those Services. For More Information, Please Refer To The Official Languages Act. The Atlantic Provinces Standard Terms & Conditions For Goods And Services Apply To This Procurement And Are Considered To Be Incorporated Into This Document. By Submitting A Bid, You Agree And Accept These Terms And Conditions. Current "atlantic Provinces Standard Terms And Conditions" Are Available On The New Brunswick Opportunities Network, The Council Of Atlantic Premiers' Website Or From An Authorized Service Provider. Covid-19 Restrictions For Workers Entering New Brunswick All Suppliers And Workers Entering The Province Of New Brunswick For Work Purposes Must Comply With The Requirements Established By Worksafe Nb And Public Health, Including Isolation Requirements Where Applicable. Click Here For More Information On These Requirements. Questions: Written Questions Relating To This Opportunity May Be Submitted To The Address Provided Below Via Email By Clicking On Questions. Please Be Sure To Include The Solicitation/tender Number In The Subject Line. Email Address: Bidquestionssoumissions@snb.ca Note: This Email Account Is Strictly For The Receipt Of Questions On Open Opportunities. This Email Is Not For The Submission Of Bids. Covid-19 Supplier Vaccination Policy Suppliers Must Comply With All Gnb Health And Safety Policies And Standards Including, Without Limitation, All Health And Safety Policies And Standards Related To Covid-19, As Applicable. Go To Www.gnb.ca/nbon To View The Full Policy And Faqs. Under Canadian Law (and International Agreements), Your Bid Must Arrive Separately And Independently, Without Conspiracy, Collusion Or Fraud; See Http://www.competitionbureau.gc.ca/eic/site/cb-bc.nsf/eng/home For Further Information. Pay Equity Does Your Organization Have 50 Or More Employees? The Government Of New Brunswick Is Committed To Encouraging And Incentivizing The Adoption Of Pay Equity By Employers Doing Business With Government. Prior To The Award Of Procurements For Goods And Services Valued Over $1,000,000, Suppliers, With Fifty (50) Or More Employees Will Be Required To Complete The Pay Equity Learning Module Developed By The Women's Equality Branch. Suppliers Should Provide A Copy Of Their Certificate Of Completion With Their Bid Submission. To Complete The Online Module And Obtain Your Certificate, Please Visit Www.gnb.ca/payequity. For Questions, Please Contact The Pay Equity Bureau Toll Free: (877) 253-0266 Or By Email: Peb-bes@gnb.ca. All Discounts Quoted Will Be Considered To Be Without Limitations. Award Of Contracts: No Contract Shall Be Awarded And No Payment Shall Be Made To A Vendor Unless Authorized By The Minister Or His Delegates. The Minister May Make An Award To The Preferred Vendor Conditional On The Negotiation And Acceptance Of A Detailed Contract Between The Province And The Vendor. In Such Cases, Should The Detailed Contract Negotiations Not Be Completed In A Reasonable Period Of Time, The Province Reserves The Right To Discontinue Negotiations With The Vendor And Subsequently Enter Into Negotiations With The Second Preferred Vendor. No Right Or Duty, In Whole Or In Part, Of The Vendor Under A Contract Issued May Be Assigned Or Delegated Without The Prior Consent Of The Strategic Procurement Branch. Unless Indicated Otherwise In This Tender Notice Or Attached Documents, All Prices Must Be Extended And Totalled. All Suppliers Engaged To Deliver Goods Or Services To The Government Of New Brunswick Must Ensure Compliance With The Designated Materials Regulation In The Provision Or Delivery Of Those Goods Obligated Under That Regulation. Please Refer To Recycle Nb's Website And The Designated Materials Regulation For Specifics. Payment Of Invoices Payment Of Invoices Is The Responsibility Of The Department Or Organization To Whom The Goods Are Shipped Or Services Are Supplied. Where The Estimated Value Of The Goods Or Services To Be Procured Is Below The Lowest Applicable Threshold Value Of Any Relevant Trade Agreement, Service New Brunswick Reserves The Right To Give Preferential Treatment To A Prospective Supplier From New Brunswick. Should This Right Be Exercised, The Following Order Of Priority Will Apply: A) Firstly, New Brunswick Manufacturers If The Goods To Be Procured Are Manufactured In New Brunswick; And B) Secondly, New Brunswick Vendors. When Bid Submissions Are Evaluated On Price: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Lowest-priced Acceptable Bid And The Bid Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Be Limited To 10%. When The Lowest-priced Acceptable Bid Before Preferential Treatment Is Applied Is A New Brunswick Vendor, The Price Differential Under Which A Nb Manufacturer Preference Will Be Applied Will Be Limited To 5%. - The Preferential Treatment Will Be Applied By Making The Award To The Nb Supplier. When Bid Submissions Are Evaluated On A Point System: - Applicability Of The Preferences Will Be Determined Based On The Price Differential Between The Pricing Component Of The Highest Scoring Acceptable Bid Submission And The Pricing Component Of The Bid(s) Receiving The Preferential Treatment. - The Price Differential Under Which A Nb Supplier Preference May Be Applied Will Be Limited To 10%. When The Highest Scoring Acceptable Bid Submission Before Preferential Treatment Is Applied Is A New Brunswick Vendor, The Price Differential Under Which A Nb Manufacturer Preference Will Be Applied Will Be Limited To 5%. - The Preferential Treatment Will Be Applied By Allotting A Maximum Of An Additional 5% Of The Total Possible Points To New Brunswick Manufacturers' Total Scores And 4% To Nb Vendors' Total Scores. If No Bid From A New Brunswick Manufacturer Has Been Retained For Preferential Treatment, New Brunswick Vendors May Receive A Maximum Of An Additional 5% Of The Total Possible Points Rather Than 4%. The Decision To Apply A Preference Will Be At The Sole Discretion Of Service New Brunswick. To Be Eligible, Suppliers Must Meet The Definition Of Nb Supplier As Identified By The Regulation Under The Procurement Act. Nb Manufacturers Should Indicate In Their Bid That They Are A Nb Manufacturer To Be Considered For The Nb Manufacturer Preference.

Details: Update: 04/27/2020 - Aoi #2 And #3 Have Been Added To This Notice. Please Reference Attachments For Information.  update: 2/25/2020  An Aoi Has Been Added To This Notice. Please Reference Attachments For Information.  section 1 – Introduction under The Authority Of 10 U.s.c. 2371b The Agility Prime Office Is Pursuing Prototype Projects From Nontraditional And Traditional Defense Contractors. These Projects Will Help The Government Assess The Transformative Vertical Flight Market And Vertical Takeoff And Landing (vtol) Technologies. This Effort Seeks To Establish A Collaborative Strategy With Industry And Investors That Accelerates Fielding Of The Most Promising Technologies For Savings And Utility To The Government, As Well As Potential Commercial Market Success. As These Systems Mature Toward Certified Commercial Operations, The Government Will Identify Opportunities For Early Adoption, With The Potential For Procurement And Fielding In The Next Three Years. the Core Technologies Of Interest Include Emerging Electric Vtol (evtol) And Urban/advanced Air Mobility (uam/aam) Aircraft, Although Alternatives Will Be Considered. These Aircraft May Incorporate Non-traditional Electric Or Hybrid Propulsion For Manned Or Optionally Manned Missions, With Onboard Pilot, Remote Pilot, Or Autonomous Control. Based On Emerging Commercial Trends, These Transformational Commercial Vehicles Are Typically Characterized By Employment Of Distributed Propulsion For Vertical Flight And Potential Use Of A Wing For Horizontal Flight, Along With Augmented Flight Control Systems, And High Levels Of Automation Or Autonomy. Besides Aircraft, This Effort Will Consider Similar Support To Enabling Technologies. during This Opening, The Government Intends To Test The Hypothesis That, Compared To Other Ground And Air Vehicles, These Aircraft Could Revolutionize Mobility Given: 1) Lower Maintenance Cost And Time, Through Mechanical Simplicity; 2) Improved Safety And Declining Personnel Demands, Using Autonomy; 3) Affordable Quantity, Based On Potential Mass Production; 4) Improved Acoustics, Employing Distributed Propulsion; And 5) Greater Flexibility And Reduced Infrastructure Needs, With Runway Independence. To Mitigate Risk, This Hypothesis Will Initially Be Tested Outside Of The Urban Environment In Scenarios That Could Potentially Open A Broad Public-use Market For Early Government Adoption Prior To Civil Certification In A Way That Accelerates Uam. Modularity Similar To A Satellite Bus Or Universal Serial Bus (usb) Could Enable Vast Use Cases. These Vehicles, Referred To As Orbs, Are Not Drones, Cars, Helicopters, Trucks, Airplanes, Motorcycles, Or Suvs, But Might Support Similar Missions. Given Their Flexibility, An Orb Could Act As An Organic Resupply Bus For Disaster Relief Teams, An Operational Readiness Bus For Improved Aircraft Availability, And An Open Requirements Bus For A Growing Diversity Of Missions. Orbs Could Enable Distributed Logistics, Sustainment, And Maneuver, With Particular Utility In Medical Evacuation, Firefighting, Civil And Military Disaster Relief, Installation And Border Security, Search And Rescue, And Humanitarian Operations. this Effort Expands On What Has Thus Far Been A Fruitful But Ad Hoc Engagement With Industry In This Sector Through The Following Path: 1) Requesting Details Regarding Planned Commercial Technologies And Markets; 2) Identifying Technologies That Are Likely To Result In Successful Prototypes; 3) Creating Opportunities For Collaborative Test Planning With The Potential Of Offering Test Assets And Expertise; 4) Leveraging This Campaign For Near-term Government Airworthiness Authorization As Well As Procurement Of Hardware, Software, Data, Or Services. The Intent Is To Accelerate Certification, While Also Assessing The Value Of Early Adoption And Fielding. Near-term Government Use-cases Could Occur Prior To Civil Certification And Might Provide Revenue And Data To Help Accelerate Even Broader Adoption And Technology Development. other Transaction For Prototype (otp) the United States Government (usg) May Choose To Award One Or More Otps As A Result Of This Opening, Depending On Evaluations And Funds Availability. In Such Cases, An Other Transaction For Prototype (otp) Agreement, In Accordance With 10 U.s Code 2371b, Will Then Be Negotiated For Prototype Project Delivery, Based On The Selected Solution Brief(s). If The Parties Intend, Upon Successful Completion Of The Prototype Project, To Enter Into A Follow-on Production Agreement Without Further Competition Using 2371b Authority, All Such Follow-on Production Agreement Terms Must Be Negotiated Prior To Execution Of, And Included Within, The Original Otp. Alternatively, Upon Successful Completion Of A Prototype Project Under The Original Otp, The Government And Successful Submitter May Subsequently Solicit And Negotiate Follow-on Far Based Contracts, Or Merely Negotiate Such Contracts, If Sufficient Justification Exists For Sole Sourcing. Follow-on Production Agreements May Include, But Are Not Limited To, Further Prototyping, In-kind Testing, Production, And Fielding As Launch Customer. the Otp Must Satisfy At Least One Of The Following Conditions: there Is At Least One Nontraditional Defense Contractor Or Nonprofit Research Institution Participating To A Significant Extent In The Prototype Project. all Significant Participants In The Transaction Other Than The Federal Government Are Small Businesses (including Small Businesses Participating In A Program Described Under Section 9 Of The Small Business Act (15 U.s.c. 638)) Or Nontraditional Defense Contractors. at Least One Third Of The Total Cost Of The Prototype Project Is To Be Paid Out Of Funds Provided By Sources Other Than Other Than The Federal Government. the Senior Procurement Executive For The Agency Determines In Writing That Exceptional Circumstances Justify The Use Of A Transaction That Provides For Innovative Business Arrangements Or Structures That Would Not Be Feasible Or Appropriate Under A Contract, Or Would Provide An Opportunity To Expand The Defense Supply Base In A Manner That Would Not Be Practical Or Feasible Under A Contract. opening Procedure And Participation this Opening Is A Competitive Solicitation, Continuously Open Until February 24 2025, Which Provides The Authority And Background For A Series Of Future Areas Of Interest (aois—see Definition In Section 2 Below) Requesting Solution Briefs And Proposals For New Solutions Or Potential New Capabilities That Fulfill Objectives, Close Capability Gaps, Or Provide Potential Technological Advancements In The Area Of Transformative Vertical Flight. The Government Reserves The Right To Award Other Transactions For Prototype (otp) Under The Authority Of 10 U.s.c. 2371b As A Result Of This Opening, If Deemed Appropriate, Based On Information Learned About This Field In The Course Of This Offering, Funds Availability, And In Accordance With The Procedures Herein, But The Government Is Not Required To Make Any Award, Unless The Government, In Its Sole Discretion, Deems Such Award Appropriate. “prototypes” Under This Legal Authority May Include Not Only Commercially Available Technologies Fueled By Commercial Or Strategic Investment That Result In Novel Applications For Defense Purposes, But Also, Among Other Things, Prototype Demonstrations, Agile Development Activities That Can Incrementally Improve Commercial Technologies That Then Become Available As Novel Defense Applications, Combinations Of These With Existing Government-owned Capabilities, Or Common Practices Newly Applied For Broad Defense Application(s). The Specific Level Of Support For Each Problem Statement Will Be Enumerated In The Aoi When Published. Please Note: This Opening Is Not Itself A Request For Solution Briefs Or Proposals. Aois Will Be Released In One Or More Separate Documents. otps Entered Into As A Result Of This Opening Shall Be Firm Fixed Price. besides Aircraft, These Aois Could Include But Would Not Be Limited To: Autonomy; Advanced Aircraft Materials And Manufacturing; Novel Acoustics Techniques; Subsystem, Aircraft, And Portfolio Design Tools; Rapid Mission Planning For Dense Air Environments And Logistics Efficiencies; Command And Control Of Air Vehicles; Robotic Landing Gear; Large Flotation Devices; Modular Payload Designs; Air Vehicle Data Networks And Rf Waveforms; Sense And Avoid Architectures, Algorithms, And Sensors; Electrical Power Storage, Generation, Charging; Alternative Onboard And Ground-based Electrical Power Generation; Distributed Electric Propulsion Control Techniques. this Opening Outlines The Processes And Procedures Whereby Solicit Solution Briefs May Be Submitted In Response To Aois. Aois Are Focused Topic Categories That Will Be Published Separately And Posted To Https://beta.sam.gov. All Solution Briefs Submitted In Response To An Aoi Will Be Considered To Be Made In Response To And Governed By This Opening. The Opening Outlines The Procedures To Submit A Response To An Aoi To Ensure A Competitive Process That Consists Of Three-phases: phase 1 Solution Briefs: Shall Be Submitted As Specified In Section 3.2 Of This Opening. phase 2 Company Engagement: Submitters With Solution Briefs That Satisfy The Aoi Will Be Evaluated And If Found To Be Of Merit May Be Invited To An Engagement Session, Subject To Availability Of Government Funds, Following The Instructions Provided In Section 3.3 Of This Opening, Or Schedule An Engagement With The Government To Provide Further Details On The Aoi. phase 3 Request For Prototype Proposal (rpp): Those Submitters Whose Solution Brief And/or Site Visit Is Found To Satisfy The Aoi, May, Subject To Availability Of Government Funds, Be Invited To Submit A Full Written Proposal Following The Instructions Provided In Section 3.4 Of This Opening For Potential Award Of An Otp For A Prototype Project (see Definition Below). the Government May Publish Aois At Any Time. Interested Submitters Should Check Https://beta.sam.gov For New Aoi Postings Under This Announcement. full Announcement Details On This Ico Are Located In The Attachments Section.   

Details: Description Invitation To Bid General Merchandise For Use In Management Of Cvris Web Application And For Use In The Implementation Of Drrm Information, Education And Communication Campaign Ib No. Gsb 2024-10-055-a 1. The Provincial Government Of Oriental Mindoro, Through The Special Purpose Appropriation Intends To Apply The Sum Of Three Hundred Fifteen Thousand Four Hundred Fifty Pesos Only (php 315,450.00) Being The Abc To Payment Under The Contract For General Merchandise For Use In Management Of Cvris Web Application And For Use In The Implementation Of Drrm Information, Education And Communication Campaign. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The Provincial Government Of Oriental Mindoro – Procurement Division For Goods & Services Now Invites Bids For The Above-mentioned Procurement Project. Delivery Of The Goods Is Required Within Seven (7) Calendar Days Upon Receipt Of Approved Notice To Proceed. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Item No. Item Description Qty./unit 1 2 3 4 5 Mini Handheld Video Camera Specifications: 1” Cmos Sensor 2” Rotatable Screen Smart Horizontal-vertical Shooting D-log M 10-bit 4k 120fps Full-pixel Fast Focus Active Track 6.0 3-microphone Array (stereo Recording) Spin Shot Supports High-definition Live-streaming Accessories: Type-c To Type-c Pd Cable Protective Cover Wrist Strap Handle With ¼” Thread Wide-angle Lens Mic Transmitter (shadow Black) Mic Windscreen Mic Clip Magnet Battery Handle Mini Tripod Carrying Bag 8k Waterproof 360 Action Camera Specifications: 4k Wide Angle Video Removable Lens Guard 135 Min Battery Life Ai Editing Stabilization Standard Lens Guard 114 Cm Invisible Selfie Stick Invisible Dive Case Floating Hand Grip Selfie Stick Wrist Strap Lens Cap 256 Gb Micro Sd Video Resolution 360” Mode: 8k: 7680x3840@30/25/24fps 5.7k+: 5760x2880@30/25/24fps 5.7k: 5760x2880@60/50/30/25/24fps 4k: 3840x1920@100/60/50/30/25/24fps Single Lens Mode: 4k: 3840x2160@60/50/30/25/24fps 2.7k: 2720x1536@60/50/30/25/24fps 1080p: 1920x1080@60/50/30/25/24fps Me Mode: 4k: 3840x2160@30/25/24fps 2.7k: 2720x1536@120/100/60/50fps 1080p: 1920x1080@120/100/60/50fps Photo Resolution: Approx. 72m (11904x5952) Approx. 18mp (5888x2944) Video Modes: Video, Active Hdr, Time Lapse, Time Shift, Bullet Time, Loop Recording Pre-recording Battery Capacity: 2290mah Charging Time: Charge To 80% In 38 Minutes (9v 2a) Charge To 100% In 55 Minutes (9v 2a) Operating Temperature: -4f To 104f (-20 To 40) Waterproof: 10m Sensor Size: % Aperture: F1.9; 35mm Equivalent Focal Length Video Format: Single-lens Mode: Mp4 360 Insv Photo Format: Insp (can Export Via Mobile App Or Studio Desktop Software) Dng Color Profiles: Standard, Vivid, Flat Video Coding: H.264, H.265 Max Video Bitrate: 200mbps Exposure Value: -4ev; Iso Range: 100-6400 Microsd Card Uhs-i V30 Speed Class, Exfat Format Sd Cards With Max Storage Of 1tb Are Recommended. Mics: 4 Bluetooth: Ble 5.2 Wi-fi: 2.4ghz, 5ghz 802.11a/b/g/n/ac Usb: Type-c Usb 3.0; Gyroscope: 6-axis Gyroscope; Color: Black All-in-one Printer Ink Tank Printer (print, Scan, Copy, Fax With Adf) Specifications: Print Speed Up To 17.0 Ipm Prints Up To A3+ (for Simplex) Automatic Duplex Printing Ultra-high Page Yield Of 7,500 Pages (black) And 6,000 Pages (colored) Wi-fi, Wi-fi Direct Flatbed, Scan And Copy Up To Legal All-in-one Printer Ink Tank Printer (print, Scan, Copy, Fax With Adf) Specifications: Print Speed Up To 17.0 Ipm Prints Up To A3+ (for Simplex) Automatic Duplex Printing Ultra-high Page Yield Of 7,500 Pages (black) And 6,000 Pages (colored) Wi-fi, Wi-fi Direct Flatbed, Scan And Copy Up To Legal Laptop Specifications: 15.6 Inches Intel Core I5 12th Generation Windows 11 Home 16gb Ddr 4gb Ram 512gb Nvme Pcle 5 Ssd Intel Iris Xe Accessories: W/ Laptop Bag, Wireless Mouse, Headphone X-x-x 2 Sets 1 Set 2 Units 1 Unit 1 Unit 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Activities Schedule Advertisement/posting Of Ib October 31, 2024  Bulletin Board Of The Pgom October 31, 2024  Pgom Website-www.ormindoro.gov.ph October 31, 2024  Geps Website – Www.philgeps.net October 31, 2024 Issuance Of Bidding Documents October 31, 2024 To November 07, 2024 Deadline Of Submission Of Bids November 07, 2024 At 1:30pm At Bac Conference Room Opening Of Bids In Sealed Envelope November 07, 2024 At 2:00pm At Bac Conference Room A) Eligibility Requirements And Technical Proposal November 07, 2024 At 2:00pm At Bac Conference Room B) Financial Proposal November 07, 2024 At 2:00pm At Bac Conference Room 4. Prospective Bidders May Obtain Further Information From Provincial Government Of Oriental Mindoro - Procurement Division And Inspect The Bidding Documents At The Address Given Below During 8:00 Am To 5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 31, 2024 To November 07, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos Only (php 500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person. 6. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Procurement Division, On Or Before November 07, 2024 At 1:30 Pm. Late Bids Shall Not Be Accepted. 7. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 8. Bid Opening Shall Be On November 07, 2024 At 2:00 Pm At Bac Conference Room, Provincial Capitol Complex, Camilmil Calapan City Oriental Mindoro. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 9. The Pgom – Procurement Division Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 10. For Further Information, Please Refer To: Niño John D. Hernandez Administrative Officer Ii Pgo-procurement Division Provincial Capitol Complex Camilmil, Calapan City Oriental Mindoro, 5200 09474066849 October 31, 2024 [date Of Issue] May Anne Joy M. Ylagan Bac Chairperson For Goods & Services

Details: Subscription to Red Hat Software, Support and Management Licenses or Equivalent and Provision of Training, Expertise, Services and Associated Technical Assistance for the Needs of Central and Decentralized Services of the Ministry of National Education, the Ministry of Higher Education and Research and the Ministry of Sports, Youth and Community Life, as well as Training and Research Establishments.

Description: Attachment 1: Combined Synopsis-solicitation For Commercial Products And Commercial Services description this Is A Combined Synopsis/solicitation For Commercial Products And Commercial Services Prepared In Accordance With The Format In Federal Acquisition Regulation (far) Subpart 12.6, Streamlined Procedures For Evaluation And Solicitation For Commercial Products And Commercial Services, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Quotes Are Being Requested, And A Written Solicitation Document Will Not Be Issued. this Solicitation Is Issued As An Rfq. The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2024-05. this Solicitation Is Set-aside For Authorized Resellers Of The Required Medical Devices And Services. Competition Is Restricted As A Result Of The Brand Name Requirement. the Associated North American Industrial Classification System (naics) Code For This Procurement Is 621511, Medical Laboratories, With A Small Business Size Standard Of $41.5 Million. The Fsc/psc Is Q502, Medical - Cardiology. the Southern Arizona Va Healthcare System (savahcs) Located At 3601 S 6th St., Tucson, Az, 85723, Is Seeking To Purchase An Arc Flash Analysis. all Interested Companies Shall Provide Quotations For The Following: supplies/services line Item period Of Performance description quantity unit Of Measure unit Price total Price 0001 base Year 48 Hour Holter Monitoring Service 100 ea â  â  0002 base Year 24-48 Holter Monitoring Services 100 ea â  â  0003 base Year extended (greater Than 48 Hour) Holter Monitoring Service 100 ea â  â  0004 base Year event (lwa Kit) 140 ea â  â  0005 base Year event (lwa Combo Kit) 140 ea â  â  0006 base Year mcot (lwa Kit) 900 ea â  â  0007 base Year mcot (lwa Combo Kit) 900 ea â  â  1001 option 1 48 Hour Holter Monitoring Service 100 ea â  â  1002 option 1 24-48 Holter Monitoring Services 100 ea â  â  1003 option 1 extended (greater Than 48 Hour) Holter Monitoring Service 100 ea â  â  1004 option 1 event (lwa Kit) 140 ea â  â  1005 option 1 event (lwa Combo Kit) 140 ea â  â  1006 option 1 mcot (lwa Kit) 900 ea â  â  line Item Cont. period Of Performance description quantity unit Of Measure unit Price total Price 1007 option 1 mcot (lwa Combo Kit) 900 ea â  â  2001 option 2 48 Hour Holter Monitoring Service 100 ea â  â  2002 option 2 24-48 Holter Monitoring Services 100 ea â  â  2003 option 2 extended (greater Than 48 Hour) Holter Monitoring Service 100 ea â  â  2004 option 2 event (lwa Kit) 140 ea â  â  2005 option 2 event (lwa Combo Kit) 140 ea â  â  2006 option 2 mcot (lwa Kit) 900 ea â  â  2007 option 2 mcot (lwa Combo Kit) 900 ea â  â  3001 option 3 48 Hour Holter Monitoring Service 100 ea â  â  3002 option 3 24-48 Holter Monitoring Services 100 ea â  â  3003 option 3 extended (greater Than 48 Hour) Holter Monitoring Service 100 ea â  â  3004 option 3 event (lwa Kit) 140 ea â  â  3005 option 3 event (lwa Combo Kit) 140 ea â  â  3006 option 3 mcot (lwa Kit) 900 ea â  â  3007 option 3 mcot (lwa Kit) 900 ea â  â  4001 option 4 48 Hour Holter Monitoring Service 100 ea â  â  4002 option 4 24-48 Holter Monitoring Services 100 ea â  â  4003 option 4 extended (greater Than 48 Hour) Holter Monitoring Service 100 ea â  â  4004 option 4 event (lwa Kit) 140 ea â  â  4005 option 4 event (lwa Combo Kit) 140 ea â  â  4006 option 4 mcot (lwa Kit) 900 ea â  â  4007 option 4 mcot (lwa Kit) 900 ea â  â  statement Of Work (sow) contract Title ambulatory Cardiac Monitoring Service background the Southern Arizona Va Healthcare System (savahcs) Requires Ambulatory Cardiac Monitoring Services To Serve The Veteran Patients. Ambulatory Cardiac Monitoring Services Are A Necessary Component Of A Full-service Cardiology Program And Necessary To The Provision Of Quality Care To Veterans. This Service Allows The Ability To Make Timely Diagnosis Of Disorders Related To Cardiac Rhythms. While Patients Are Performing Routine Daily Activities, The Chances Of Documenting Arrhythmias Causing Transient Problems Are Greatly Enhanced With Monitoring. At The Onset Of A Symptom (flutters, Dizziness, Presyncopal Episodes, Etc.), Monitoring Allows For The Detection Of Symptomatic And Asymptomatic Cardiac Rhythm Disturbances. objective the Contractor Shall Provide All Personnel, Equipment, Supplies, Facilities, Transportation, Tools, Materials, Supervision, And Other Items And Non-personal Services Necessary To Perform Ambulatory Cardiac Monitoring Services As Defined In This Statement Of Work Except For Those Items Specified As Government Furnished Property And Services. scope the Contractor Shall Provide Ambulatory Ekg Monitoring And Data Processing For Veterans Assigned To The Savahcs. Monitoring And Analysis Shall Occur Either Near-real Time Via Event & Telemetry Service Or After The Holter Recorder Data Has Been Transmitted To The Contractor. the Contractor Shall Furnish The Following Equipment To The Government And/or Veteran Patients: personal Ekg Monitoring Recorder With Or Without Event/telemetry As Specified By The Care Provider. current Operator S Manual(s) To Be Available Electronically And In Hard Copy. hands-on Training By A Local Representative As Requested By The Contracting Officer S Representative (cor) the Contractor Shall Repeat The Monitoring Study At No Additional Costs To The Government For The Following Reasons: device(s) Provide Unsatisfactory Results; device(s) Fail To Transmit Or Download Information; information Is Not Retrievable Through The Web-based System; the Selected Contractor Shall Provide Equipment And Off-site Monitoring. No Travel Fees Will Apply. All Deliveries, Disposable Items, And Equipment Are Included In The Pricing. devices Shall Be Provided To Patients Directly By The Va Xyz Or Mailed To The Patient By The Contractor. After Wearing The Recorder For The Period Prescribed By The Requesting Care Provider, Device(s) Shall Be Mailed By The Veteran Directly Back To Contractor. the Contractor Shall Provide A Return Mailer As Part Of The Equipment Package. Any Devices Given To A Patient That Are Lost Or Damaged Shall Be Replaced By The Contractor Within Five Business Days At No Cost To The Government. procedure the Device(s) Are Given To Patients To Use From 1 To 30 Days Depending On Prescription Of The Requesting Care Provider. the Contractor Shall Stock An Adequate Number Of Devices At The Va Xyz Or Patient Hookup At That Location. after Screening By Va Technicians, Contractor May Receive A Request To Mail A Device Directly To The Patient. Upon Receipt Of Order, Contractor Shall Contact The Patient Within 24 Hours By Phone, And Electrocardiography (ecg) Technicians Will Instruct Patients On The Functions Of The Device(s) To Include But Not Limited To, How To Use It, How To Hook It Up, And How To Place Leads. during Mailed Orders, Contractor Will Contact The Patient To Aide Activation Of Patient Monitoring Device. after The Evaluation Period, The Patient Returns The Device(s) To The Contractor With Provided Return Mailer Or To The Va Xyz Who Will In Turn Mail The Recorder To The Contractor. general Requirements telemetry - External Mobile Cardiovascular Telemetry With Electrocardiographic Recording, Concurrent Computerized Real Time Data Analysis And Greater Than 24 Hours Of Accessible Ecg Data Storage (retrievable With Query) With Ecg Triggered And Patient Selected Events Transmitted To A Remote Attended Surveillance Center For Up To 30 Days; Technical Support For Connection And Patient Instructions For Use, Attended Surveillance, Analysis And Transmission Of Daily And Emergent Data Reports As Prescribed By A Physician Or Other Qualified Health Care Professional. Atrial Fibrillation Detection With 100% Sensitivity And 100% And 100% Positive Predictability For Episodes Lasting 30 Seconds Or Longer. device Philips Ecg Solutions Mobile Cardiac Outpatient Telemetry (telemetry Mode). Equipment Shall: be Ordered For The Patients Specific Needs monitor The Patient For 24 Hours A Day (365 Days A Year) have The Capability Of Event Transmissions Being Sent Via Wireless/cell Phone Technology have Ability To Store 100% Of The Ecg Data In The Device(s) When Patient Is In An Area Of No Cellular Service; No Event Can Be Lost Due To Memory Limitations ecg Real Time Transmissions And Analysis Must Have A Minimum Of 2 Leads, Up To 6 Leads (views) With No More Than 3 Electrodes have Ability For 100% Of Ecg Data To Be Transmitted In Real-time To Receiving Center For Entire Monitoring Period have Ability To Post Daily Analysis Reports For Physician Review On All Ecg Data Over The Monitoring Period have Ability To Immediately Transmit, Alert And Report Patient Activated Events Immediately Upon Patient Pressing Event Button have Ability To Immediately Transmit, Alert And Report Asymptomatic Events Meeting The Physician S Notification Criteria include Technical Reading Of The Device(s) Along With A Comprehensive Report That Is Available Online And Will Be Interpreted By The Medical Staff allow Both Patients And Va Staff To Have Unlimited 24/7 Telephone Access To Contractor S Support Staff That Are Knowledgeable And Shall Supply Help In Resolving Any Monitoring Problems have Ability To Post An End Of Study Remote Telemetry Report Compiling All Event Descriptions And Ecg Data Into One Conclusion Report. extended Holter External Electrocardiographic Recording From 3-14 Days By Continuous Rhythm Recording And Storage; Includes Recording, Scanning Analysis With Report. device Philips Ecg Solutions Epatch Extended Holter (3-14 Day Mail Back Or Office-upload). traditional Holter External Electrocardiographic Recording Up To 48 Hours By Continuous Rhythm Recording And Storage; Includes Recording, Scanning Analysis With Report. device - Philips Ecg Solutions Epatch Extended Holter (24-48hr Office-upload) notification Procedures Contractor Maintains Customizable Notification Criteria That Will Be Completed By Va Greater Los Angeles Healthcare System (vaglahs) And Will Dictate All Notifications To Location With Abnormal Holter Alerts, Urgent Mct Notifications, And Emergent Mct Notifications. data Management philips Will Maintain The Following Qualifications: federal Information Processing Standard 140-2 Compliance fips Certificate #3328 Now Reflects The Information That You Provided For The Philips Ecg Solutions Cryptographic Module. The Certificate Is Posted At The Link Below: https://csrc.nist.gov/projects/cryptographic-module-validation-program/certificate/3328 memorandum Of Understanding Interconnection Security Agreement Via Lifepoint Informatics (mou-isa) portal while Patient Is Wearing The Device, Transmission Patient Activated Report, Urgent Asymptomatic Event Report, Daily Holter Report And End Of Study Report Options Shall Be Made Available Online Via The Philips Cardiac Ambulatory Workspace Portal. The Va Greater Los Angeles Healthcare System (vaglahs) Shall Have Access To Patient Reporting 24 Hours A Day At The Physician S Or Authorized Representative S Convenience Through Password Protection. Registration Information Will Be Entered By Va Technician On The Contractor S Web Site, Or By Transmission Of An Xml Or Hl7 Encoded Data Transfer File From Va To Contractor To Provide An Automated Registration Process. full View Of All Available Inventory And A Running Log Of Active And Historical Patients Will Be Available On The Web Portal. emr Integration after A 6 Months Initial Period, Contractor Should Provide An Hl7 Or Xml Encoded Data File In Addition To The Pdf Report File. This Data File To Include Identification Of The Study (patient, Recording Period, Studyid), Type Of Study, And Results (heart Rate Range, Characterization Of All Arrhythmias/events And Summary Statistics) Registration Of The Patient And Study Shall Initially Occur Manually.  va Technician Will Provide Information On The Contractor S Website. Data To Include Name, Dob, Contact Information, Type Of Study Requested, Duration Of Study, And Any Special Requests.  the Contractor Has Ability To Provide An Electronic Ordering Capability To Use Hl7 Encoding For This Data To Eliminate The Need For Manual Input. contractor Shall Provide Study Reports Via Their Web-portal.â  Contractor Can Also Provide Report Data Through Hl7, Sftp, And Api Integration To Align With Order Interface, As Mentioned Above. all Emr Integration Work And Timelines Are Subject To Approval From Visn It Leadership. work Flow the Device(s) Are Given To Patients To Use From 1 To 30 Days Depending On The Indication For Continuous Monitoring. initially, Ecg Technicians Will Instruct And Explain To The Patients What The Device(s) Is, How The Patient Will Use It, How To Hook It Up, And How To Place Leads. they Will Then Hook Up The Device(s) And Let The Patient Go Home With Specific Instructions To Continue To Have The Device On For The Duration Of Evaluation. alternatively, The Monitor(s) Will Be Sent Directly To The Patient, And The Patient Will Be Hooked Up At Home With Instructions From The Vendor. in Either Of These Cases A Baseline Is Always Submitted To The Monitoring Center Where Trained Personnel Record And Interpret The Strip. physician Notification Criteria Will Be Established Prior To Enrollment. When Asymptomatic And/or Symptomatic Ecg Events Are Alerted That Meet The Site-specific Notification Criteria, A Call Is Made To The Site To Verbally Communicate The Critical Event. Also, A Dated Urgent Report Will Be Prepared And Posted On The Web Portal For Physician Evaluation And Faxed Upon Request. daily And Weekly Mct/event Reports Will Be Made Available Within The Online Portal And Faxed Upon Request. an Mct End Of Service Summary Report Shall Be Available 1-2 Days After The Service Is Completed. a Final Holter Report Will Be Available Within 2-3 Days Of Holter Device Being Received To Accommodate Upload And Scan Of Patient Data. (access To The Data From The Website Is Limited To The Physicians And/or Any Other Authorized Representatives Responsible For Evaluating The Data). equipment all Equipment Offered Shall Be U.s. Food And Drug Administration (fda) Approved. all Cardiac Mcot And Holter Monitors Shall Be Provided By The Contractor For Va Use And Shall Be State-of-the-art Equipment, Lightweight, And Simple For Patients To Use. Patients Will Use The Monitors From One (1) To Thirty (30) Days, Or As Specified By The Va Provider. Samples Shall Be Provided To Each Site During The Training Or Orientation Process. the Contractor And Facility Cor Will Determine An Equipment Inventory Level At The Time Of Contract Award That Shall Always Remain At Each Facility Location. This Equipment Inventory Must Be Adequately Always Restocked To Ensure That The Facility Can Always Meet The Daily Patient Demand. all Equipment Remains The Sole Property Of The Contractor Including The Initial Delivery Of The Units. The Contractor Is Responsible For All Service Maintenance And Repairs Of The Equipment And Hardware. the Contractor Shall Supply A Postage-paid Return Container For All Monitors. instrument Capabilities lightweight (no More Than 1 Pound) And Easy To Use Design That Can Be Held In One Hand. available Instruments Should Include A Wireless Waterproof Patch Recorder. capability Of Event Transmissions Being Sent Via Wireless/cell Phone Or Advanced Technology. bidirectional Communication Between Our Emr(cprs) And The Contractor Is Highly Desirable telemetry Real Time Monitoring Capability Transmitting And Recording 100% Of Ecg Data. customizable Monitors. wireless 24/48 Hour Holter / 3-14 Day Holter / Outpatient Telemetry Devices Providing All Three Monitoring Functions Over The 1 -30 Days Monitoring Period. pacemaker Pulse Detection. instrument/monitor Has A Date And Time Stamp For Clinical Reports. instrument/monitor Can Correlate Between Time And Symptom And Identify/present All Rhythm Strips Associated With All Reported Symptoms. all Monitoring Devices Must Provide A Of 1 To 6 Diagnostic Leads Of Continuous Ecg Data Over Entire Monitoring Period, 3 Lead Pacemaker Annotations, And The Ability To Correlate Symptoms And Activity With Ecg Changes. all Consumable Items (batteries, Patches) Are Provided To Patient By Contractor Who Returns The Item After Monitoring Period. contractor Equipment Shall Be Capable Of Storing Up To Thirty-day (30) Of All Ecg Data, Using Standard Size Batteries Readily Available, And Easily Changed By The Patient. training: The Contractor Shall Provide Comprehensive Training To The Cor And Selected Va Staff. The Training Shall Consist Of Proper Use Of The Monitoring Devices, Instructions On How To Upload Patient Information Into Contractor Provided Software And/or Websites, And How To Maintain Or Provide Basic Quality Assurance Tests. Philips Ecg Solutions Shall Also Provide Copies Of Manuals, Equipment Checklists, Surveys, And Specific Contact Information In The Event That A Medical Center Staff Person Needs To Contact The Contractor 24/7. technical Support: Technical Support Is Required Via Telephone For Troubleshooting Of Method And/or Problems. The Response Time For Telephone Technical Assistance Shall Be Within One (1) Hour From The Time Of The Initial Call For Technical Support. Philips Ecg Solutions Shall Also Show Availability 24/7 For Patient Support. Philips Ecg Solutions Shall Have Appropriately Trained Personnel Available By Phone Throughout The Duration Of All Tests For Patient Support. quality Assurance maintenance: all Monitors Shall Be Kept At Original Equipment Manufacturer (oem) Specifications. all Portable Ecg Monitoring Equipment Shall Be Cleaned, Disinfected, And Decontaminated Per Joint Commission Standards, Each Time Before It Is Sent Back To Facility After Download By Contractor. Unclean Equipment Should Be Stored In An Area Separate From Cleaned Equipment To Prevent Cross Contamination. contractor Shall Demonstrate Set Procedures For Proper Inspection And Maintenance Of The Portable Monitoring Equipment And Shall Provide Each Location A Copy Of The Inspection Checklist. the Contractor Shall Have A Formal Procedure To Validate The Functional Integrity Of Any Device Before It Is Provided To A Patient, And Shall, At A Minimum, Complete And Document Such Validation Procedure Whenever A Device Is Returned With Non-diagnostic Or Unsatisfactory Results, Or When Visual Inspection Suggests The Possibility Of Device Damage. contractor Shall Report On The Failure Rate Of Their Equipment And Supply Maintenance Records. contractor Shall Provide Upgrades To Equipment And Software That May Become Available At No Additional Cost To The Government. the Contractor Shall Coordinate Installation Of Upgrades With The Cor. the Contractor Shall Provide Customer Notifications And Latest Operator S Manual Within 10 Days After Their Release/publication. quality Program the Contractor Shall Maintain A Quality System That Ensures Conformance To Contractual Requirements And Meets The Requirements Of Iso 9001 And/or Cms Requirements For Equivalent Ecg Technical Monitoring, Or An Equivalent Quality System During Performance Of This Contract. contractor Shall Have A Clearly Defined Process By Which It Collects The Required Data, Performs Fbonotice Cause Analysis, And Can Supply Easily Understandable Reports. contractor Shall Demonstrate That Their Information Systems Are Hipaa Compliant, And That The Raw Data Can Be Transferred Securely And With Accuracy To The Va. contractor Shall Track The Following Events: Receipt Of The Recorders, Identification Of Any Events Or Arrhythmias Satisfying Criteria For Md Notification, Efforts To Notify Va Staff Of Such Events. Data Recorder Will Include Date/time And Identify The Person(s) Involved. period Of Performance work Hours normal Hours Of Operation For Savahcs Are Monday Through Friday From 8:00 Am To 4:30 Pm. federal Holidays new Year S Day january 01 martin Luther King S Birthday third Monday In January president S Day third Monday In February memorial Day last Monday In May juneteenth june 19 independence Day july 04 labor Day first Monday In September columbus Day second Monday In October veterans Day november 11 thanksgiving Day fourth Thursday In November christmas Day december 25 if The Holiday Falls On A Sunday, The Following Monday Will Be Observed As A National Holiday. When A Holiday Falls On A Saturday, The Preceding Friday Is Observed As A National Holiday By U.s. Government Agencies, And Any Day Specifically Declared By The President Of The United States Of America. period Of Performance the Contract Period Of Performance Is One Base And Four Option Years, With An Fob Of Destination. contract Period pop Begin pop End base 12/1/2024 11/30/2025 option 1 12/1/2025 11/30/2026 option 2 12/1/2026 11/30/2027 option 3 12/1/2027 11/30/2028 option 4 12/1/2028 11/30/2029 invoices payment Of Services Rendered Under This Contract Shall Be Made In Arrears Upon Satisfactory Completion Of Each Service And Receipt Of A Properly Prepared Invoice And Submitted By The Contractor To The Payment Address Specified By Contracting. Invoices Shall Reference The Contract Number And Purchase Order Number, Manifest Number(s), Provide A Complete And Accurate Description Of Services/ Supplies Delivered/ Rendered, Including Dates Of Performance, Amounts, Unit Prices, Extended Totals And Any Other Data Relevant For Payment Purposes. the Government Shall Not Authorize Payment Until Such Time That The Savahcs Cor All Properly Executed And Signed Documentation. no Advance Payments Shall Be Authorized. Payment Shall Be Made On A Monthly Arrears For Services Provided During The Billing Month In Arrears In Accordance With Far 52.212-4, Para. (i). Upon Submission Of A Properly Prepared Invoice For Prices Stipulated In This Contract For Services Delivered And Accepted In Accordance With The Terms And Conditions Of The Contract, Less Any Deductions Stipulated In This Contract. payment Of Invoices May Be Delayed If The Appropriate Invoices As Specified In The Contract Are Not Completed And Submitted As Required. place Of Performance/place Of Delivery address: department Of Veterans Affairs southern Arizona Va Medical Center (savahcs) 3601 S 6th Ave tucson, Az postal Code: 85723 country: united States the Full Text Of Far Provisions Or Clauses May Be Accessed Electronically At Http://acquisition.gov/comp/far/index.html. the Following Solicitation Provisions Apply To This Acquisition: far 52.212-1, Instructions To Offerors Commercial Products And Commercial Services (sep 2023) addendum To Far 52.212-1, Instructions To Offerors Commercial Products And Commercial Services far 52.252-1, Solicitation Provisions Incorporated By Reference (feb 1998) far 52.204-7, System For Award Management (oct 2018) far 52.204-16, Commercial And Government Entity Code Reporting (aug 2020) far 52.217-5, Evaluation Of Options (jul 1990) far 52.229-11, Tax On Certain Foreign Procurements-notice And Representation (jun 2020) vaar 852.233-70, Protest Content/alternative Dispute Resolution (oct 2018) vaar 852.239-75, Information And Communication Technology Accessibility Notice (feb 2023) far 52.204-24, Representation Regarding Certain Telecommunications And Video Surveillance Or Equipment (nov 2021) far 52.204-29, Federal Acquisition Supply Chain Security Act Orders Representation And Disclosures (dec 2023) far 52.209-7, Information Regarding Responsibility Matters (oct 2018) far 52.233-2, Service Of Protest (sep 2006) vaar 852.233-71, Alternate Protest Procedure (oct 2018) far 52.212-2, Evaluation Commercial Products And Commercial Services (nov 2021) far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services (may 2024) offerors Must Complete Annual Representations And Certifications Electronically Via The System For Award Management (sam) Website Located At Https://www.sam.gov/portal In Accordance With Far 52.212-3, Offerors Representations And Certifications Commercial Products And Commercial Services. If Paragraph (j) Of The Provision Is Applicable, A Written Submission Is Required. the Following Contract Clauses Apply To This Acquisition: far 52.212-4, Contract Terms And Conditions Commercial Products And Commercial Services (nov 2023) addendum To Far 52.212-4, Contract Terms And Conditions Commercial Products And Commercial Services Applies To And Is Included With This Acquisition. far 52.252-2, Clauses Incorporated By Reference (feb 1998) far 52.203-17, Contractor Employee Whistleblower Rights (nov 2023) far 52.204-13, System For Award Management Maintenance (oct 2018) far 52.204-18, Commercial And Government Entity Code Maintenance (aug 2020) far 52.242-17, Government Delay Of Work (apr 1984) vaar 852.201-70, Contracting Officer S Representative (dec 2022) vaar 852.203-70, Commercial Advertising (may 2018) far 52.217-8, Option To Extend Services (nov 1999) far 52.217-9, Option To Extend The Term Of The Contract (mar 2000) vaar 852.232-72, Electronic Submission Of Payment Requests (nov 2018) vaar 852.242-71, Administrative Contracting Officer (oct 2020) far 52.212-5, Contract Terms And Conditions Required To Implement Statutes Or Executive Orders Commercial Products And Commercial Services (may 2024) the Following Subparagraphs Of Far 52.212-5 Are Applicable: Subparagraph (b)(5), (9), (11), (12), (25), (26), (31), (33), (34), (36), (39), (46), (51), (55), (59), (c)(1), (7), And (8). all Invoices From The Contractor Shall Be Submitted Electronically In Accordance With Vaar Clause 852.232-72, Electronic Submission Of Payment Requests. This Is Accomplished Through The Tungsten Network, Located At: Http://www.fsc.va.gov/einvoice.asp. This Is Mandatory And The Sole Method For Submitting Invoices. all Quoters Shall Submit The Following: All Information Required By Far 52.212-1(b) Submission Of Offers. all Quotes Shall Be Sent To The Network Contracting Office (nco), At Stephanie.naron@va.gov. award Will Be Based Upon A Comparative Evaluation Of Quotes In Accordance With The Simplified Acquisition Procedures Of Far 13. Comparative Evaluation Is The Side By Side Pairwise Comparison Of Quotes Based On Factors Resulting In A Contracting Officer Decision For The Quote Most Favorable To The Government. options Will Be Evaluated At Time Of Award. the Following Are The Decision Factors: Price, And Past Performance, With Price More Important. past Performance Will Be Based On Cpars And Fapiis Ratings. No Rating In Cpars Is Equal To A Neutral Rating. the Award Will Be Made To The Response Most Advantageous To The Government. responses Should Contain Your Best Terms, Conditions. to Facilitate The Award Process, All Quotes Must Include A Statement Regarding The Terms And Conditions Herein As Follows: "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document Without Modification, Deletion, Or Addition." or "the Terms And Conditions In The Solicitation Are Acceptable To Be Included In The Award Document With The Exception, Deletion, Or Addition Of The Following:" Quoters Shall List Exception(s) And Rationale For The Exception(s), If Any. submission Of Questions Shall Be Received No Later Than Friday, 10/25/2024, 14:00 Pdt At Stephanie.naron@va.gov Only. Subject Line Shall Include Questions To Rfq 36c26225q0059. submissions Shall Include Your Quote, Using The Attached Schedule, As Well As A Capabilities Statement With Qualifications Proving All Certifications And Education Required For The Work Being Conducted In The Sow. Submissions Not Meeting All Requirements Of The Sow Will Be Considered Ineligible For Award . submission Of Your Response Shall Be Received Not Later Than Friday, 11/01/2024, 10:00 Pdt At Stephanie.naron@va.gov Only. Subject Line Shall Include Response To Rfq 36c26225q0059. late Submissions Shall Be Treated In Accordance With The Solicitation Provision At Far 52.212-1(f). any Questions Or Concerns Regarding This Solicitation Should Be Forwarded In Writing Via E-mail To The Point Of Contact Listed Below. point Of Contact stephanie Naron contract Specialist stephanie.naron@va.gov

Details: The purpose of this contract is the purchase, supply, delivery, installation, commissioning and training of personnel of a Confocal Raman Micro-spectrophotometer (True Confocality) and its computer workstation including the control, acquisition and data processing software at the Institute of Separative Chemistry of Marcoule (ICSM) within the Joint Research Unit (5257).

Details: Description 1 Centrifuge Machine 1 Pc 250,000.00 250,000.00 Purpose Of Use: A Centrifuge Is A Device That Uses Centrifugal Force To Subject A Specimen To A Specified Constant Force, For Example To Separate Various Components Of A Fluid. This Is Achieved By Spinning The Fluid At High Speed Within A Container, Thereby Separating Fluids Of Different Densities Or Liquids From Solids. Features And Benefits Safety Ø Compact, Tabletop Clinical Centrifuge Ø High Performance, Built-in, 28-place Rotor With Compact Frame And All Metal Containment For Added Safety Ø Lid Locking And Holding Device Ø Emergency Lid Lock Release Ø Lid Closure Of Metal Ø Safety-lock Lids, Must Be Self-closing, Auto-locking And Come With Either Single And Dual Steel Lid Locks. This Ensures A Safe, Tight Closure Of The Centrifuge Chamber During Operation. Ø Imbalance Switch-off Ø Flexible Motor Bearings Ø Deep Metal Rotor Chamber (die-cast-aluminum) To Securely Ø Accommodate The Rotor Ø Continuous Run, Short Cycle Mode Design Ø Smooth Plastic Housing, Easy To Clean Ø Metal Lid Ø Deep Metal Rotor Chamber Technical Characteristics Max. Rpm (speed) / Rcf: 6,000-13,000 Rpm / 4,226-16,060 Rcf Noise Level: ≤ 57-58 Db(a) Dimensions In Mm (hxwxd): (260 X 370 V 440) Supplier Preferences Net Weight: Approx. Approxaimately 20-25 Kg Emission / Immunity : En / Iec 61326-1, Class B / Fcc Class B Swing-out Rotor 4-place, Illustrated With 7 Carriers N= 4,000 Min-1, Max Rcf 2,665, Max. Cap. 4 X 100 Ml. Tube Per Rotor 28 Controls And Displays Ø During Centrifugation The Actual Values Of The Parameters Are Indicated Ø The Centrifuge’s Speed And Running Time Can Be Variably Adjusted For Ø Different Applications. Ø Speed Display In Rpm Or Rcf Ø Rpm Input From 200 To 10.000 In Steps Of 10, Starting From 10.000 To Ø The Maximum Speed In Steps Of 100 Ø Rcf Input From 200 To 10.000 In Steps Of 1, Starting From 10.000 To The Maximum Speed In Steps Of 10 Ø Time T/min: 1 - 99 Min. In Steps Of 1 Min., Ø Time T/sec: 1 - 59 Sec. In Steps Of 1 Sec., Ø Continuous Operation Ø Brake Stage, Selectable Between Fast And Slow Ø Pulse Key: For Short Centrifugation Operations Ø Open Lid Key Accessories Supplied 1 Unit 2kva Ups 1 Unit 2kva Avr 3 Units 90mm, 140mm, 205mm Ring Shaped Cushioning With Support Base 3 Unit Step Plate (foot Stool) 1 Sets Right And Left Double Bar With Driven Tilt 1 Pcs 400mm R-sectin, Radiolucent, Antistatic Coating Allows Pelvic Zone Substantive Sift Outward Table Colum And Wide Access Of X-ray Unit 1 Sets Support & Pad Mounted On Operating Table Top Side Rails, Molded Padding Made Of Integral Polyurethane With Antistatic Coating, Stainless Steel Elements 2 Pcs Supporting Legs With Sliding Block 1 Pc Frame With Ball Joint 1 Pc Pad 1 Set Leg Support & Radial Serrated Clamp 1 Set 1 Frame Equipment With Tilt And Lift Drive And 1 Head Pad Warranty And Maintenance Warranty : 5 Years Warranty Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Staff/end-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Safety And Standards Risk Classification Regulatory Approval / Certification Should Be A Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards Sterilization Process For Accessories Chemical Sterilization- Non Corrosive Chemical / Disinfectant Regulatory Approval / Certification Should Be Fda, Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards For Electrical Safety Conforms To Iec-61010 International Standards: Iso Certified 2 Compound Light Microscope 1 Pc 180,000.00 180,000.00 Purpose Of Use: A Microscope Is A Laboratory Instrument Used To Examine Objects That Are Too Small To Be Seen By The Naked Eye. Microscopy Is The Science Of Investigating Small Objects And Structures Using A Microscope. Microscopic Means Being Invisible To The Eye Unless Aided By A Microscope. Features And Benefits • Ergonomic Grips Add Safety When Retrieving The Microscope From High Places. • Colored Grips Indicate The Appropriate Places To Hold The Microscope. • Smooth, Rounded Design Eliminates Sharp Edges. • The Arm Is Angled To Keep User’s Wrists In A Comfortable, Neutral Position. • The Eyepiece Can Be Fixed In Place To Help Preventdamage Or Loss During Transportation. • A Rackless Stage And Stage Cover Enable Safety And Stability During Long Periods Of Use. •a Locking Pin Keeps The Observation Tube In Place. •interpupillary Adjustments, Ranging From 48 To 75 Mm, Enables Individual Users To Set It To Their Needs. •eyepoint Adjustments Accommodate The User’s Height And Provide Greater Comfort. •left And Right Diopter Adjustment Enable Optimal Focus For Each Eye. Technical Characteristics Body: Aluminum Die-cast Metal Frame, Protective Plastic Covering Optical System: Infinity Optical System Illumination System: Built-in Transmitted Illumination System Led Power Consumption: 0.5 W (nominal Value) Focusing: •stage Height Movement •coarse Movement Stroke: 15 Mm •coarse Adjustment Limit Stopper •torque Adjustment For Coarse Adjustment Knob •fine Focus Knob (minimum Adjustment Gradations: 2.5 Μm) Revolving Nosepiece: Fixed Quadruple Nosepiece With Inward Tilt Stage: Wire Movement Mechanical Fixed Stage •size (w × D): Atleast 174 Mm × 89 Mm •traveling Range (x × Y): 76 Mm × 30 Mm •specimen Holder •specimen Position Scale Observation Tube Type: Binocular, Anti-fungal Trinocular, Anti-fungal Eyepiece (anti-fungal): 10x Field Number 20 15x Eyepiece Tube Inclination: 30° Light Path Selector: Eyepiece/camera Port = 100/0 Or 0/100 Interpupillary Distance Adjusting Range 48 – 75 Mm Eyepoint Adjustment: 370.0 – 432.9 Mm Condenser: •abbe Condenser Na 1.25 With Oil Immersion •built-in Aperture Iris Diaphragm Objectives Plan Achromat, Anti-fungal 4x Na 0.1 W.d. 27.8 Mm 10x Na 0.25 W.d. 8.0 Mm 20x Na 0.4 W.d. 2.5 Mm 40x Na 0.65 W.d. 0.6 Mm 100xoil Na 1.25 W.d. 0.13 Optional Accessories Reflection Mirror (ch20-mm), Eyepiece Micrometer Dust Cover, Darkfield Stop Field Diaphragm Dedicated Wooden Case Reflection Mirror Eyepiece Micrometer Dust Cover, Darkfield Filter Dimensions (w × D × H) 198 Mm × 398 Mm × 386 Mm 198 Mm × 398 Mm × 430 Mm Atleast Weight Approximately 5.9 Kg Approximately 6.5 Kg Rated Voltage/electric Current Ac 100 – 240 V 50/60 Hz 0.4 A Power Consumption Less Than 2 W Accessories 1 Unit 1500va Ups 1 Unit 1500va Avr 3 Units 90mm, 140mm, 205mm Ring Shaped Cushioning With Support Base 3 Unit Step Plate (foot Stool) 1 Sets Right And Left Double Bar With Driven Tilt 1 Pcs 400mm R-sectin, Radiolucent, Antistatic Coating Allows Pelvic Zone Substantive Sift Outward Table Colum And Wide Access Of X-ray Unit 1 Sets Support & Pad Mounted On Operating Table Top Side Rails, Molded Padding Made Of Integral Polyurethane With Antistatic Coating, Stainless Steel Elements 2 Pcs Supporting Legs With Sliding Block 1 Pc Frame With Ball Joint 1 Pc Pad 1 Set Leg Support & Radial Serrated Clamp 1 Set 1 Frame Equipment With Tilt And Lift Drive And 1 Head Pad Warranty And Maintenance Warranty : 3 Years Warranty Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Staff/end-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Safety And Standards Risk Classification Regulatory Approval / Certification Should Be A Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards Sterilization Process For Accessories Chemical Sterilization- Non Corrosive Chemical / Disinfectant Regulatory Approval / Certification Should Be Fda, Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards For Electrical Safety Conforms To Iec-61010 International Standards: Iso Certified 3 Laboratory Incubator Machine 1 Pc 100,000.00 100,000.00 Purpose Of Use: A Laboratory Incubator Provides A Temperature-controlled Environment To Support The Growth Of Microbiological Cultures. Features And Benefits Insulation Chamber Stability And Reduces Heat Load Output To The Laboratory And Operating Power Consumption, That Lowers Operating Costs Microprocessor Control Technology Comprehensive Diagnostic Leds Glass Door For Observing Samples Inside The Chamber During Operation Exceptional Pre-heat Chamber Technology That Guarantees Maximum Thermal Performance High-quality 2-point Door Seal And Eccentric Hinge Ensures Maximum Gasket Compression For Stable Chamber Temperature Forced Convection Design Produces Faster Temperature Response Rates, Improves Uniformity And Reduce Fluctuation Permanently Lubricated And Maintenance-free Fan For Uniform Air Circulation Easy-to-clean External Surface Antibactirial Coated To Eliminate 99.9% Of Surface Bacteria Within 24 Hours Of Exposure Dedicated Uv Disinfection Feature Available In Refrigerated Incubator Model That Can Be Manually Or Automatically Operated Auto-defrosting Feature In Refrigerated Incubator Model During Operation And Activates Regularly Side Access Port For Temperature Validation And Mapping Water Reservoir For Water Collection During Defrosting Technical Characteristics Volume: 32l To 54l Temperature Range: Ambient +7.5 Degrees To 100 Degrees Temperature Variation: 37-50 Degrees Temperature Fluctuation: 37-50 Degrees Heating Up Time: 37-50 Degrees Recovery Time After 30 Seconds Door Open: 37-50 Degrees Noise Level: 49 Dba Incubator Construction: Main Body: Chamber Electro-galvanized Steel With White Oven-baked Epoxy-polyester Antimicrobial Powder-coated Finish Number Of Shelves: Standard 2 Maximum 4 Maximum Load Per Shelf: 15 -30kg Electrical: 800w-1000w Microprocessor Control Technology Twin Temperature Display For Easy Monitoring (“actual” And “set Point” Displays) Air Flow Adjuster Via Slider For Exchange Rate Of Air Timer Function (0000 - 9999 Minutes) And Up To 10 User-configurable Program Operation Connected To An Instrument-grade Precision Platinum Temperature Pro Accessories 1 Unit 2000va Ups 1 Unit 2000va Avr 3 Units 90mm, 140mm, 205mm Ring Shaped Cushioning With Support Base 3 Unit Step Plate (foot Stool) 1 Sets Right And Left Double Bar With Driven Tilt 1 Pcs 400mm R-sectin, Radiolucent, Antistatic Coating Allows Pelvic Zone Substantive Sift Outward Table Colum And Wide Access Of X-ray Unit 1 Sets Support & Pad Mounted On Operating Table Top Side Rails, Molded Padding Made Of Integral Polyurethane With Antistatic Coating, Stainless Steel Elements 2 Pcs Supporting Legs With Sliding Block 1 Pc Frame With Ball Joint 1 Pc Pad 1 Set Leg Support & Radial Serrated Clamp 1 Set 1 Frame Equipment With Tilt And Lift Drive And 1 Head Pad Warranty And Maintenance Warranty : 3 Years Warranty Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Staff/end-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Safety And Standards Risk Classification Regulatory Approval / Certification Should Be A Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards Sterilization Process For Accessories Chemical Sterilization- Non Corrosive Chemical / Disinfectant Regulatory Approval / Certification Should Be Fda, Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards For Electrical Safety Conforms To Iec-61010 International Standards: Iso Certified 4 Hot Plate With Magnetic Stirrer 1 Pc 150,000.00 150,000.00 Purpose Of Use:a Magnetic Stirrer Or Magnetic Mixer Is A Laboratory Device Which Uses A Rotating Magnetic Field To Cause A Stir Bar To Spin Very Quickly. The Rotating Field May Be Created Either By A Rotating Magnet Or A Set Of Stationary Electromagnets, Placed Beneath The Vessel With The Liquid. The Magnetic Stirrer Is A Very Useful And Convenient Method Of Stirring Liquids And Suspensions And It's Crucial In Air-free Processes. Technical Characteristics 1.stirring Range From 0 Rpm To 2000 Rpm 2.black Ceramic Top Offers Scratch Resistance 3.corrosion Resistant In Salt Water And Acid 4.continuous Working Time 5.pid Controlled Temperature Of 400 °c For Uniform Heat Distribution 6.electronic Speed Control For Constant Speed Even During Change In Load 7.individual Unit Operation Or All Units Controlled Operational Modes (flexible) 8.with Free Additional Accessories Needed (removable Holder, Clamp With Screw, Inner Thermocouple 4-spin,outer Thermocouple 4-spins, 4 Prong Stainless Steel Clamp Opens To 31/2", Magnetic Bead Designed Specifically For Round Bottom Flasks) 9. A Stirring Capacity For Flasks Ranging From 50 Ml To 15 L 10.it Offers Digital Temperature Control And An Outer Thermocouple That Measures And Controls The Liquid Temperature Value Together With The Front Panel. The Inner Thermocouple, Controls And Measures The Hotplate Stirrer Temperature. Accessories 1 Unit 1500va Ups 3 Units 90mm, 140mm, 205mm Ring Shaped Cushioning With Support Base 3 Unit Step Plate (foot Stool) 1 Sets Right And Left Double Bar With Driven Tilt 1 Pcs 400mm R-sectin, Radiolucent, Antistatic Coating Allows Pelvic Zone Substantive Sift Outward Table Colum And Wide Access Of X-ray Unit 1 Sets Support & Pad Mounted On Operating Table Top Side Rails, Molded Padding Made Of Integral Polyurethane With Antistatic Coating, Stainless Steel Elements 2 Pcs Supporting Legs With Sliding Block 1 Pc Frame With Ball Joint 1 Pc Pad 1 Set Leg Support & Radial Serrated Clamp 1 Set 1 Frame Equipment With Tilt And Lift Drive And 1 Head Pad Warranty And Maintenance Warranty : 3 Years Warranty Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Staff/end-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Safety And Standards Risk Classification Regulatory Approval / Certification Should Be A Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards Sterilization Process For Accessories Chemical Sterilization- Non Corrosive Chemical / Disinfectant Regulatory Approval / Certification Should Be Fda, Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards For Electrical Safety Conforms To Iec-61010 International Standards: Iso Certified 5 Double Door Reagent Refrigerator 1 Pc 300,000.00 300,000.00 Features And Benefits Temperature Control ■ Microprocessor Control With Led Temperature Display Give A Temperature Reading Up To 0.1°c. ■ Forced-air Circulation System Ensuring Temperature Range Of 2°c ~ 8°c. ■ Liquid Temperature Sensor Will Minimize The Temperature Fluctuation. ■ Controller Is Designed With Compressor Delay Start Up, Temperature Off Set Calibration, Auto Defrost. Safety Control ■ Microprocessor Controller Can Be Locked To Prevent Unauthorized Access Alarms System ■ Alarm Buzzer And Temperature Display Backup System Can Last For At Least 48 – 72 Hours During Power Failure If Battery Is Fully Charged. ■ The Alarm System Will Alert Through Buzzer Sound Or Alarm Message If The Below Conditions Occur: Out Of Range For High And Low Alarm Setting, Power Failure, Door Open More Than 5 Minutes. Technical Characteristics Air Circulation: Force Air Circulation Alarm Conditions: High & Low Alarm , Door Open, Power Failure, Low Battery Alarm System: Audible And Visual Alarms With Battery Back-up. With Remote Alarm Contact Cabinet Construction: Epoxy Coated Mild Steel Capacity: 1500-1600 Litres Or Higher Certificate: Iso13485, Mda Approval Manufacturer Chamber Dim: 1770w X 695d X 1430h (mm) Or Supplier Preference Compressor Power: 3/4hp Or Better Controls Panel: Touch-pad Icon Based Controls & Display, Key Operated Power On/off Switch Cooling Capacity: At 5°c (btu/hr) 7100 Or Better Defrost: Automatic Cycle Defrost Door: 3-4 Self-closing Heated Glass Door Door Lock: 3-4 Unit Of Door Lock With Keys Foam Insulation: Cfc-free Polyurethane Indicating Lamp: Fluorescent Lamp Noise Level: <55dba Overall Dim: 1880w X 825d X 2070h(mm) Or Supplier Preference Rated Load Amps: 5.5a,1200w Or Better Refrigerant: R134a Or R404a, Cfc Free Refrigeration Compressor: Reciprocating Hermetic Seal Type Shelves: 15 Pcs Epoxy Coated Shelves Temp. Setting & Display: Led Digital Display To 0.1°c Temp.working Range: 2°c To 8°c (preset At 4°c) Voltage: 240vac, 50hz, Or Better Weight: 280kg Or Supplier Preference Other Components * 1 Unit Avr 3kva * 1 Unit Ups Atleast 3-5kva Medical Grade Depends On The Load Capacity * 2 Units Extra Fuses For, Avr & Ups Training, Installation And Utilisation Pre-installation Requirements Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** End-user And Biomed Technician In Coordination With The Engineering Department To Affirm Completion Of Installation Training Of Users *** Training Of Users In Operation , Basic And Advance Maintenance Shall Be Provided *** Advanced Maintenance Task Required Shall Be Documented *** Supplier To Train Astmmc Biomed Staff/s For Advance Maintenance With Certificate Of Completion Provided User Care: Unit Easy To Clean And Sterilize Warranty And Maintenance Warranty : 2 Years Software / Hardware Upgrade Availability Software/hardware Upgrades Available During Useful Lifespan Documentation Documentation Requirements - User, Technical And Maintenance Manuals To Be Supplied In English Language - At Least 3 Copies - Certificate Of Calibration And Inspection To Be Provided With Sticker In Equipment As Proof Of Calibration - List Of Equipment And Procedures Required For Local Calibration And Routine Maintenance To Be Provided By The Supplier - List Of Important Spare Parts And Accessories With Their Part Numbers And Cost To Be Provided By The Supplier - Trade-in With Manufacturer If Available Decommissioning Estimated Life Span: 5 Years Safety And Standards Risk Classification Regulatory Approval / Certification Should Be Fda, Ce Or Ul Approved Product. "manufacturer / Supplier Should Have Iso Certificate For Quality Standard. Electrical Safety Conforms To Standards For Electrical Safety Conforms To Iec-61010 Total Amount 980,000.00

Details: Description Procurement Of Ict Equipment (7) (2nd Posting) The Municipal Government Of Kasibu, Through The Supplemental Budget #1, 2024- Office Supplies Expense Intends To Apply The Sum Of: Three Hundred Fifty-one Thousand Three Hundred Eighty-nine Pesos Only (351,389.00) For The Project: Procurement Of Ict Equipment (7) (2nd Posting) Invitation Number195-2024 Being The Abc To Payments Under The Contract To Wit: Item No. Unit Qty Description Abc Remarks Unit Cost Total Cost Peso 1 Unit 1 Laptop With Complete Accessories: I7 Processor, Memory :8 Gb Ddr4 -3200 Mhz Ram (1*8 Gb) , 512 Gb Internal Storage , Display : 39.6 Cm (15.6”) Diagonal , With Free Laptop Bag , Mouse And Mouse Pad 49,999.00 49,999.00 Magro 2 Unit 1 Desktop Computer, All-in-one, 27” With Built In Cd Drive, Aio C24 1800 13th Gen Inter Core I3- 1315u/8gb So Dimm Drr4/intel Uhd Graphics/256 Gb Ssd + 1 Tb Hdd Win 11 Home Sl With Microsoft Office Installed; With Mouse Pad; Mouse And Key Board -usb Type. 49,9900.00 49,990.00 3 Pc 10 Mouse Pad With Computer Shortcut Keys, Non-slip Large Thickened Keyboard Mat, 30cm X 50 Cm X 2cm 290.00 2,900.00 4 Pc 1 Keyboard, Usb Type, Game Keyboard, Wired, Waterproof, Three-color Blacklight, Black 600.00 600.00 8 5 Pc 2 Flash Drive 32 Gb, Original 450.00 900.00 Mpdo 6 Unit 1 Binding Machine: >model Bm – C24d (24 Holes) >overall Dimension: H4.5” X L 17.5” X W14.5 Inches >weight: 15.8 Kg >punching Capacity: 15 -20 Sheets >binding Capacity: 15 -20 Sheets >paper Size: 14” Legal Size > Punching Holes: 24 Holes >disengageable Die Pins :24 Pins >binding Capacity :450 Sheets Max (70gsm) 25,000.00 25,000.00 7 Unit 1 A3 Printer Specifications: General: >supply Voltage >ac 220v -240v >product Dimensions >705 X 322 X 215 Mm (width X Depth X Height) >product Weight >12,2 Kg >compatible Operation Systems >mac Os 10.5+, Windows 7, Windows 8, Windows Vista , Windows Xp >interfaces >usb >power Supply >220v, 240v Print >printing Speed Iso/iec 24734 >15 Pages /min Monochrome, 5,5 Pages /min Colour >printing Speed >30 Pages /min Monochrome , (plain Paper 75g/m²),7 Pages /min Colour (plain Paper 75g/m² >colours >black, Cyan,yellow , Magenta Paper /media Handling >paper Formats >a3+, A3(29.7 X 42.0 Cm ), A4(21.0x 29.7 Cm ), A5(14.8x 21.0cm ) , A6(10.5x 14.8 Cm ) B4, B5, C6(envelope ), Dl 35,000.00 35,000.00 9 (envelope) , No 10 (envelope) . 10 X 15 Cm 13x 18 Cm 13x 20cm User Define, Legal, C4(envelope) > Output Tray Capacity >40sheets >paper Tray Capacity >100 Sheets Standard, 20 Photo Sheets >media Handling >manual Duplex Technology >nozzle Configuration >360nozzeles Black, 59 Nozzles Per Color > Minimum Droplet Size >3pl >ink Technology >dye Ink >printing Resolution >5.760x 5.706 Dpi Hrmo 8 Unit 3 Ups, Rated Power:1600 Va/960 Watts, Connection Type: Universal Type, Input /output Voltage:230 V 15,000.00 45,000.00 9 Unit 1 Ups, Rated Power 1600 Va/960 Watts, Connection Type: Iec C13(8) Input/output Voltage :230v With 4iec Universal Adopter 45,000.00 45,000.00 Sbo 10 Unit 1 Scanner Ds 770 600x600dpi, Usb 3.2 Gen 1 Capacity:100 Sheet Document Sizes: - Paper Size Minimum: 2” X 2” - Paper Size Maximum: 8.5” X 240 At 200 Dpi, 8.5” X 215 “at 300 Dpi Daily Duty Cycle: 5,000 Sheets² Paper Weight: 27-413 G/m² Consumable: Roller Assembly Kit: 200,000.00 Pages General: Operating System: - Windows ® 10 - Windows 8/8.1 - Windows 7 49,900.00 49,900.00 10 - Mac Os X®10.9.8- Macos ® 10.12.x Software Requires Internet Connection For Download And Installation. Temperature: - Operating :41º To 95 º F (5º To 35ºc) - Storage: - 13º To 140 ºf (- 25º To 60ºc) Humidity: Operating: 10- 80% (no Condensation) Dimension: - Product Only: 11.7” X 7.7 X 12.5” - Product In Package: 14.5” X 9.9” X 11.5” Weight: - Product Only: 8.1lb - Product In Package: 10.6lb Country Origin: Indonesia Scan Features: Others: Card Thickness Maximum: Less Than 1.24mm With Emboss Buttons: Double-feed Detect Skip, Slow Mode, Scan, Stop Magro 11 Unit 2 Uninterruptible Power System(ups) Model: Ups -2000va Input:140v Ac300v,50/60hz,6.0, Amax Output:230vac, 50/60hz Capacity; 2000va/1200w 8,580.00 17,160.00 Mdrrmo 12 Unit 1 Printer, Print –scan-copy, Wireless Printing, Up To 6000 B/w Pages, Up To7000 Colour Pages, Integrated Ink Tank And Easy Refilling, Borderless Printing, Paper Size: A4, A5, B5, Letter Legal 4x6”, 5x7”, 8x10”, Envelopes, Square, Business Card, Package Content :printer, Power Cord , Ink Bottle’s, Installer, Manual, Usb Cable 25,000.00 25,000.00 11 13 Unit 2 Electric Fan, Stand Type, 18” Banana Type Plastic Blade , Easy Height Adjustment ,3-speed Push Button Switch, High-performance Motor, With Thermal Fuse Protection 1,995.00 3,990.00 14 Set 1 Extension Cord Set, With 3 Gang Outlet, 10 Meters 950.00 950.00 Total :three Hundred Fifty One Thousand Three Hundred Eighty Nine Pesos Only P 351,389.00 Bids Received In Excess Of Line And Total Abc Shall Be Automatically Rejected At Bid Opening. The Municipal Government Of Kasibu Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required By At Least 15 Days After Receipt Of Purchase Order. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. Prospective Bidders May Obtain Further Information From The Municipal Government Of Kasibu-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours 8:00am To 5:00pm – Monday To Friday. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 21, 2024 From The Given Address And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Hundred Pesos Only (p500.00). The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Presented Personal. The Municipal Government Of Kasibu Will Hold A Pre-bid Conference1 On October 28, 2024 At 10:00am At The General Services Office, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The General Services Office On Or Before November 12, 2024 At 10:00 O’clock Am. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 1 May Be Deleted In Case The Abc Is Less Than One Million Pesos (php1,000,000) Where The Procuring Entity May Not Hold A Pre-bid Conference. 12 Bid Opening Shall Be On November 12, 2024 At Exactly 10:30am At The General Services Office. Bids Will Be Opened In The Presence Of Bidder’s Representative Who Choose To Attend. The Opening Of Bids Shall Take Place At The General Services Office. The Municipal Government Of Kasibu Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: Gaudencio Q. Orpiano, Jr. Jesijen Grace N. Lunag Admin. Asst. V/store Keeper Iv/ Head Bac Secretariat Admin. Asst. Ii/ Member Bac Secretariat Cp # 09265996599 Cp #09279534801 Date Of Posting: [october 21, 2024] James B. Canayan Municipal Assessor Bac Chairperson

Details: Description Republic Of The Philippines Local Government Unit Of General Santos City Bids And Awards Committee Goods And Consultancy Services City Hall, General Santos City Total Description Of Articles Item No. 1. Digital Interactive Information Kiosk 55" Steel Pedestal Mount Industrial Grade Ids, U.s. Branded Panel (submit Brochure) 45 Degree Angle/slant Steel Pedestal Uses 1.2mm Gi Steel Plates And Internal Steel Brackets Kiosk Provisions And Accessories, Security Keylock, Power Provision & Others Touch Plus Technology Designed To Endure Heavy Touch Transaction/multi Touch Technology Reliable, Integrated Ids Solution With Optional Nfc/rfid Scanners And Webcam Kits Multi Touch Performance With "built For Touch" Reliability Thin, Commercial Grade Touchscreen Ideal For Kiosk, Wayfinding And Other Office Applications Touch Osd (no Remote Needed) Active Display Area: 930.24mm (h) X 523.26mm (v) Or 36.62in (h) X 20.06in (v) Lcd Technology Active Matrix Tft Lcd Mounting Options: Vesa Mount Per Mis F, 400,400,6mm Native Resolution: 1920 X 1080 @ 60hz Aspect Ratio: 16:9 Contrast Ratio (typical): 4000 Response Time (tr+tf): (typical) Branded Ids Intel Host Device With 16gb Memory, 256gb, Win Pro Os 1kva Uninterruptible Power Supply Voice Interactive With (4) Stereo Speaker Local Materials/civil Works/fulfillment Onsite Necessary Local Materilas, Special Mounting & Project Installation Contingencies With Onsite Programmer To Design The Necessary Program To Be Needed In The Implementation 620,000.00 Page 2 Of 6 24cb Gsc 561 Total Description Of Articles Item No. 2. Interactive Kiosk With Thermal Printer And Queueing System 15.6" Ji Model Capacitive Touch Display; Android 7.1, Rk3288 2g+8g; 1920*1080, 85/85/85/85, 300nits; 10 Points Capacitive Touch; Black Housing+silver Aluminum Frame; One Year Warranty On Parts And Labor. Local Materials/civil Works/fulfillment Onsite Necessary Local Materials, Special Mounting & Project Installation Contingencies With Onsite Programmer To Design The Necessary Program To Be Needed In The Implementation With Built In Thermal Printer With Installation Of Customized Queueing System 760,000.00 3. Kiosk (freestanding 43inch Tft Led) Panel Model : Freestanding 43inch(touch Screen) Tft Led Digital Signage Display Max Resolution: 1920x1080 Brightness : 500cd/m 2 Response Time: 26ms Processor : Quad Core Arm Cortex A17，1.8ghz Operation System: Android 7.1 Os Ddr3: 2gb Flash: 8gb Storage Temp: 0 65 Degree Working Temp: 0 50 Degree Storage Humidity : 10 90% Working Humidity: 10 90% Lan: Rj45 Port Wifi: Built In Wifi 802.11b/g/n 4g (optional): Wcdma Usb 2.0 : X2 Hdmi Output : X1 Tf Card: X1 Rj45 : X1 4g Sim (optional): X1 Video: H.264, Mkv, Wmv9, Mpeg 1/2/4, Hd Divx, Xvid, Rm/rmvb; Image : Bmp/png/gif/jpeg Audio : Mp3,wma,wav,eaac+, Mp2 Dec, Vorbis (ogg), Ac3, Flac, Ape, Bsac; Scrolling Text : Txt Rolling Subtitles: H.264, Mkv, Wmv9, Mpeg 1/2/4, Hd Divx, Xvid, Rm/rmvb; Power Memory: Bmp/png/gif/jpeg Split Screen: Mp3,wma,wav,eaac+, Mp2 Dec, Vorbis (ogg), Ac3, Flac, Ape, Bsac; Software Update: Txt Display Mode : Support Portrait & Landscape Display Mode Play Mode: Repeat All, Single Repeat, Order Play Material: Metal Color : Black Mount: Freestanding Certification : Ce/rohs/fcc Design Operation: 24hours Warranty One Year Warranty On Parts And Labor Local Materials/civil Works/fulfillment Onsite Necessary Local Materials, Special Mounting & Project Installation Contingencies With Onsite Programmer To Design The Necessary Program To Be Needed In The Implementation 680,000.00 Page 3 Of 6 24cb Gsc 561 *24cb Gsc 561* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. 4. Laptop For Engineering Works ▶ Operating System Operating System Windows 11 Home ▶ Processor & Chipset Processor Type Core™ I5 Processor Model Intel® Core™ I5 13420h Processor Processor Speed 2.1 Ghz Processor Speed (turbo) 4.6 Ghz ▶ Memory Standard Memory 16 Gb (2 X 8gb Ddr5) Memory Technology Ddr 5 Number Of Total Memory Slots 2 ▶ Storage Total Solid State Drive Capacity 512 Gb Pcie Nvme + 1tb M.2 Ssd ▶ Display & Graphics Screen Size Screen Refresh Rate 39.6 Cm (15.6") 144hz Display Screen Technology Ips Lcd Screen Resolution 1920 X 1080 Graphics Controller Manufacturer Nvidia® Graphics Controller Model Nvidia® Geforce Rtx™ 2050 Graphics Memory Capacity 4gb Graphics Memory Technology Gddr6 Vram Graphics Memory Accessibility Dedicated ▶ Audio Speakers Yes ▶ Network & Communication Wireless Lan Yes Wireless Lan Standard Ieee 802.11 A/b/g/n+ac+ax Ethernet Technology Gigabit Ethernet Bluetooth Yes Bluetooth Standard Supports Bluetooth 5.1 Or Above ▶ Built In Devices Webcam Yes Webcam Resolution (front) 1280 X 720 Microphone Yes ▶ Interfaces/ports Hdmi Yes Number Of Usb 3.2 Gen 1 Port 3 Number Of Usb 3.2(type C) Ports 1 Network (rj 45) Yes Audio Line Out Yes Headphone Yes ▶ Battery Information Number Of Cells 4 Cell Battery Chemistry Lithium Ion (li Ion) Battery Capacity 57 Wh ▶ Power Description Power Supply 3 Pin 135 W Ac Adapter ▶ Physical Characteristics Color Obsidian Black ▶ Warranty Warranty 2 Years Warranty 720,000.00 Page 4 Of 6 24cb Gsc 561 *24cb Gsc 561* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production Total Description Of Articles Item No. The Local Government Unit Of General Santos City Now Invites Bids For The Supplies And Delivery Of Procurement Of Various It Equipment For Obo. Delivery Of The Goods Is Required 50 Calendar Days. Bidders Should Have Completed, Within 3 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders) Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non Discretionary "pass/fail" Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. Prospective Bidders May Obtain Further Information From Local Government Unit Of General Santos City And Inspect The Bidding Documents At The Address Given Below During Monday To Friday, 8:00 Am To 5:00 Pm Except On Holidays. A Complete Set Of Bidding Documents May Be Purchased By Interested Bidders Starting October 15, 2024 12:00 Noon From The Address And Website(s) Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Php 5,000.00. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Either In Person, By Facsimile, Or Through Electronic Means. The Local Government Unit Of General Santos Will Hold A Pre Bid Conference On 10/24/2024 2:00:00pm At Bids And Awards Committee Office 4th Floor, Left Wing, City Action Investment Center, General Santos City, Which Shall Be Open To Prospective Bidders. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Indicated Below On Or Before November 5, 2024 12:00 Pm. Late Bids Shall Not Be Accepted. All Bids Must Be Accompanied By A Bid Security In Any Of Acceptable Forms And In The Amount Stated In Itb Clause 14. Bid Opening Shall Be On November 5, 2024 2:00 Pm At The Given Address Below. Bids Will Be Opened In The Presence Of The Bidders Representatives Who Choose To Attend The Activity. Page 5 Of 6 24cb Gsc 561 *24cb Gsc 561* Generated From Bac Procurement Management System 1.0 Powered By: Dr. Ugs Production The Local Government Unit Of General Santos City Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. For Further Information, Please Refer To: _______________________________ Atty. Francisco M. Gacal Chairperson, Bac Goods And Consulting Services

Details: Description Republic Of The Philippines University Of Northern Philippines Tamag, Vigan City Invitation To Bid For The Procurement Of Unp College Of Medicine Smart Laboratory-interactive Simulations And Skills Laboratory 1. The University Of Northern Philippines, Through The Trust Fund, 2024 Intends To Apply The Sum Of ₱ 25,000,000.00 The Abc To Payments Under The Contract For Procurement Of Unp College Of Medicine Smart Laboratory-interactive Simulations And Skills Laboratory/g-2024-36. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 2. The University Of Northern Philippines Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within 90 Calendar Days For Lot 1 And 60 Calendar Days For Lot 2 And 3 Upon Receipt Of Notice To Proceed. Bidders Should Have Completed, Within 5 Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii (instructions To Bidders). 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra No. 5183. 4. Prospective Bidders May Obtain Further Information From University Of Northern Philippines And Inspect The Bidding Documents At The Address Given Below During 8:00 Am – 12:00 Pm And 1:00-5:00 Pm, From Monday To Friday Except Non-working Holidays. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 22 – November 11, 2024 From The Given Address And Website(s) Below And Upon Payment Of The Applicable Fee To The Cashier’s Office For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, To Wit: Lot No. Abc Price Of Bid Documents Per Lot 1 ₱ 24,140,000.00 ₱ 25,000,000.00 2 400,000.00 500.00 3 460,000.00 500.00 1-3 25,000,000.00 25,000.00 If The Bidder Shall Submit Its Bid For More Than One Lot, The Bidder Shall Pay The Corresponding Maximum Fee For The Bidding Documents Stated In The Guidelines Issued By The Gppb Based On The Total Abc Of The Lots To Be Bid. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees In Person, By Facsimile, Or Through Electronic Means. 6. The University Of Northern Philippines Will Hold A Pre-bid Conference On October 30, 2024, 10:00 Am At Bac Meeting Room, 2/f Roco Lina Building, University Of Northern Philippines, Tamag, Vigan City, Ilocos Sur And/or Through Video Conferencing Or Webcasting Via Google Meet (https://meet.google.com/jxm-txqj-xov) Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through: (i) Manual Submission At The Office Address Indicated Below On Or Before November 11, 2024, 9:00 Am. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 11, 2024, 9:00 Am At The Given Address Below And/or Via Google Meet (https://meet.google.com/jxm-txqj-xov). Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The University Of Northern Philippines Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Dr. Fatima F. Rocamora/dr. Frances R. Duldulao University Of Northern Philippines Tamag, Vigan City, Ilocos Sur 2700 Bac@unp.edu.ph (077) 632-6895 Www.unp.edu.ph You May Visit The Following Websites: For Downloading Of Bidding Documents: Www.philgeps.gov.ph October 21, 2024 Fatima F. Rocamora, Edd Bac Chairperson Procurement Of Unp College Of Medicine Smart Laboratory – Interactive Simulations And Skills Laboratory Abc: ₱ 25,000,000.00 Lot No. Item No. Unit Item Description Qty Abc --unp College Of Medicine Smart Laboratory-interactive Simulations And Skills Laboratory (pr #2024-05-27-403) Trust Fund Lot 1--laboratory Equipment--abc: ₱ 24,140,000.00 Warranty Period: 5 Years 1. Unit Fully Instrumented Mother And A Partially Instrumented Fetus Standard Equipment: • Wireless And Tetherless Maternal Manikin • Birthing Fetus • Fetus To Support Leopold’s Maneuvers • 2 Abdomens (1 For Delivery, 1 For Prepartum And Postpartum) • Postpartum Uterus • Static Cervices For Vaginal Exams •partially Inverted Uterus • Abdominal Cover For All Fours Birthing • Operating Software • Wireless Emulated Patient Monitor • 3 Patient Profiles • 10 Simulated Clinical Experiences (sces) 1. Normal Delivery 2. Instrumental Vaginal Delivery 3. Fetal Tachycardia (due To Maternal Pyrexia) 4. Breech Delivery 5. Fetal Central Nervous System Depression (due To Narcotics Administered To Mother) 6. Shoulder Dystocia 7. Major Postpartum Hemorrhage (due To Uterine Atony) 8. Maternal Cardio-respiratory Arrest 9. Eclampsia 10. Umbilical Cord Prolapse • 1 Standalone License (manual Mode) • 1 Standalone License (modeled Mode) • Female Patient Module With Non-gravid Abdomen And 5 Sces 1. Chronic Heart Failure Exacerbation 2. Acute Respiratory Distress Syndrome 3. Sepsis With Hypotension 4. Brain Attack With Thrombolytic Therapy 5. Motor Vehicle Collision With Hypovolemic Shock Manikin • 69” H X 22” W X 15” D (175 Cm X 56 Cm X 38 Cm) • 111 Lbs (50 Kg) Fetus • 19” H X 6” W X 4.5” D (48 Cm X 15 Cm X 11.5 Cm) • 5.5 Lbs (2.5 Kg) Electrical • Input: 100-240 V, 50/60 Hz, 2.3 A • Internal Batteries: 14.4 V, Lithium Ion • Maternal Manikin Battery Life: 4 Hours • Fetus Battery Life: 7 Hours Control Computer: I5 8gb Ram 128gb Ssd 12.3 Inch Display 10-point Multi-touch Screen Virtual Patient Monitor In Aio Pc: I3 4gb Ram 512gb Ssd 23.8” Fhd Ips Touchscreen Geforce Video Graphics Card Wireless Keyboard And Mouse Obstetrical • Integrated Maternal-fetal Physiological Modeling • Realistic Birth Canal And Vulva • Perineum Support With Accurate Fetal Descent And Rotation • Multiple Birthing Positions: Lithotomy, Sitting And All-fours • Rectal Suppository Administration Prepartum • Vaginal Examinations For Evaluation Of The Cervix, Fetal Station, And Position • Static Cervices Represent Various Stages Of Dilation From Closed To 5 Cm, And Effacement From 0 To 90% • Leopold’s Maneuvers • Epidural Port With Infusion And Aspiration Intrapartum • Realistic Palpable Uterine Contractions • Controllable Rate And Duration Of Contractions • Trendelenburg Position With Detection • Left Lateral Tilt With Detection • Vertex And Breech Delivery • Mcroberts Maneuver With Observable Pelvic Tilt • Suprapubic Pressure Support And Detection With Palpable Symphysis Pubis • Supports Delivery Of Posterior Arm During Shoulder Dystocia • Zavanelli Maneuver With Detection • C-section Team Training Support • Rotation Of Anterior And Posterior Shoulder Is Detected In Resolving Shoulder Dystocia (rubin Ii And Woods’ Screw Maneuvers) • Forceps Application • Vacuum Extraction • Intact/fragmented Placenta With Realistic Color, Texture And Flexibility Fetus • Fetal Heart Sounds (five Locations Based On Fetal Presentation) • Articulated Fetal Body And Neck (with Lateral Neck Movement), Shoulders, Elbows, Hips, And Knees • Clinically Accurate Fetal Size With Tactile Realism–50th Percentile On The Who Growth Chart • Fetal Neck Traction Sensing • Palpable Fontanel And Sagittal Suture • Fetal Airway Suctioning • Programmable Audible Cry Upon Delivery • Predicted 1-minute And 5-minute Apgar Scores Based On Fetal Blood Gas Values • Umbilical Cord That Can Be Cut And Clamped Postpartum • Postpartum Hemorrhaging, Including Class Iii Hemorrhage • Contracted And Boggy Uterus • Bimanual Compression And Uterine Massage With Detection And Automatic Response • Uterine Blood Released Upon Massage • Inverted Postpartum Uterus • Uterine Reversion (optional Uterine Inversion Module) • Intrauterine Balloon Insertion Airway And Breathing • Realistic Upper Airway • Positive Pressure Ventilation • Bag Mask Ventilation • Advanced Lungs With Mechanical Ventilation Support, Including Patient-triggered Modes • Airway Management And Ventilation • Supports Endotracheal Tubes, Nasal-pharyngeal And Oropharyngeal Airways • Spontaneous Breathing With Chest Excursion • Lung Auscultation: Anterior And Posterior • Spontaneous Chest Excursion Circulatory System • Electrocardiogram (ecg) Monitoring Posts For Interface With Real Ecg Monitor • 12-lead Dynamic Ecg Display • Dynamic Bilateral Pulses: Carotid, Radial, Brachial, And Dorsalis Pedis • Variable Pulse Strength Cardiovascular • Correct Hand Placement Detection • Advanced Cpr Analysis (compression Depth And Rate, Chest Recoil, Compression Fraction, Ventilation Volume And Rate) • Cpr Metrics Compliant With Aha Guidelines • Pacing, Cardioversion And Defibrillation • Nibp By Auscultation And Palpation • Heart Sounds Nervous System • Seizure Is Simulated With Rhythmic Movement Of Arms And Rapid Blinking • Symeyes Display Patient Symptoms And Conditions, Including Jaundice, Hemorrhage, Keyhole Pupil, Cataracts And Bloodshot Or Droopy Eyes • Blinking, Panning And Reactive Eyes With Multiple Settings Fluids • Postpartum Bleeding Tank (2 L) • Bilateral Iv Arms • Urinary Catheterization • Epidural Infusion Speech • 2-way Voice Communication • Pre-recorded Speech • User-recorded Speech -1- 2. Unit Advanced Infant Simulator Wireless And Tether Less Infant Manikin: •medium Skin Tone • Tablet Control Computer • Physiologically Driven Control Software • Patient Weight Affects Physiology Of Patient And Its Response To Modeled Drugs • Two Wireless Stethoscope Adapter To Use Any Stethoscope On The Simulator • Includes The Following Five (5) Clinical Scenarios On Infant Care: -- Infant Code -- Neonatal Abstinence Syndrome -- Neonatal Resuscitation -- Pneumothorax -- Poor Perfusion • Electronic User Guide Manikin: • 22” H (55.88 Cm) Maximum Size • 9.25 Lbs. (4.18 Kg) Maximum Weight Electrical: • Ac Input: Ac 115-230vac, 50/60hz Autovolt • Internal Batteries: 3.8v 3.88 Ah Lithium Ion, Rechargeable • Runtime: Approximately 4 Hours Articulation • Realistic Joint Articulation • Articulating Neck, Shoulders, Elbows, Hips And Knees • Forearm Pronation And Supination Airway • Anatomically Accurate Oral Cavity And Realistic Airway • Nasotracheal/orotracheal Intubation (et Tube) • Head Tilt, Chin Lift, Jaw Thrust • Supports Esophageal Intubation • Lma Insertion • Oral And Nasal Pharyngeal Airway Insertion • Bag-valve-mask Ventilation Support • Tracheostomy • Laryngospasms • Intubation Depth Detection And Software Event Log Cardiac • Effective Chest Compressions Generate Palpable Femoral Pulses And Ecg Activity • Supports Ecg Monitoring Using Real Devices • Cpr Real-time Quality Feedback And Reporting • Chest Compression Depth Sensor • Defibrillation -- Defibrillate Using Real Devices And Energy -- Cardiovert, And Pace Using Real Devices And Energy • Library Of Cardiac Rhythms Circulation • Palpable Pulses -- Brachial -- Femoral --umbilical • Pulse Palpation Event Detection And Logging • Blood Pressure Dependent Pulses • Variable Pulse Strength • Circumoral Cyanosis Gastric And Urinary • Interchangeable Female And Male Genitalia • Abdominal Distention When Incorrectly Intubated • Urinary Catheterization With Urine Output • Feeding Tube Placement (no Fluids) Neurologic • Variable Tristate Eyes • Manually-manipulated Fontanel (depressed, Normal, And Bulging) • Crying/grunting • Active Arm Movement Respiratory • Unilateral Chest Rise With Right Mainstem Intubation • Automatic Detection And Logging • Visible Chest Rise During Bag-valve-mask Ventilation • Spontaneous, Continuous Breathing • Variable Respiratory Rates And Inspiratory/ Expiratory Ratios • Programmable Unilateral Chest Rise And Fall • Unilateral Lung Sounds Synchronized With Respiratory Rate • Substernal Retractions • Mechanical Ventilation Support -- A/c, Simv, Cpap Pcv, Psv, Nippv -- Supports Peep (up To 20 Cmh2o) • Ventilation Measurement • Chest Tube Placement • Mid-clavicular Needle Decompression Sounds • Auscultation Of Normal And Abnormal Heart, Lung And Bowel Sounds Vascular Access • Bilateral Anterolateral Thigh Intramuscular And Subcutaneous Injection Sites • Iv Cannulation: Bolus, Infusion, And Sampling • Iv Sites: Upper Arm, Scalp And Foot • Peripheral Arterial Catheter Placement • Subclavian Catheter Placement • Umbilical Catheterization: Continuous Infusion And Sampling • Io Tibial Access Pharmacology • Physiologically Driven Simulator • Pharmacokinetics And Pharmacodynamic Programming For At Least 9 Drugs: 1. Adenosine 2. Atropine 3. Dobutamine 4. Dopamine 5. Epinephrine 6. Fentanyl 7. Lidocaine 8. Morphine 9. Naloxone • Iv Cannulation: Bolus, Infusion, And Sampling • Iv Sites: Upper Arm, Scalp And Foot • Peripheral Arterial Catheter Placement • Subclavian Catheter Placement • Umbilical Catheterization: Continuous Infusion And Sampling -1- 3. Set Adult Male Circumcision Trainer – Light This Product Has Been Designed For Healthcare Professionals Practicing The Necessary Skills For Prophylactic And Therapeutic Male Circumcision. It Allows Practitioners To Perform The 3 Most Common Methods Of Circumcision. Overview • Able To Perform Penile Ring Block Technique • Penis Presented In Supine Position • Can Be Used To Practice Suturing Techniques Realism • Realistic And Accurate Representation Of The Foreskin: Realistic Retraction Of Foreskin And Realistic Representation Of The Layers Of The Foreskin Versatility • Compact And Portable • Available In Light Or Dark Skin Tones Safety • Latex Free Skills Gained • 3 Methods Can Be Performed: • Forceps Guided • Dorsal Slit Method Sleeve Resection -1- Lot 2--medical Equipment--abc: ₱ 400,000.00 Warranty Period: 1 Year 4. Set Laryngoscope With Pedia And Adult Blade, (metal, Stainless) Laryngoscope Set Conventional Pedia Set Of 4pcs • Small Battery Handle • Macintosh Blade #00,0,1 Laryngoscope Set For Adult Set Of 4 Pcs • Standard Battery Handle • Macintosh Blade # 1 • Macintosh Blade # 2 • Macintosh Blade # 3 -4- 5. Set Vaginal Speculum, (metal, Stainless) • Authentic Steel Non-quenched • Non-magnetic Steel • Double Beaked, Self-retaining • Estimated Weight: 0.240 -6- 6. Set Ambu Bag (adult) • Manual • Tackle Box • Ambu Bag Mask • Reservoir Bag • Manual Resuscitator • Connector/oxygen Tubing • Additional Accessories (airway, Mouth Opener) -6- 7. Set Ambu Bag (pedia) • Manual • Tackle Box • Ambu Bag Mask • Reservoir Bag • Manual Resuscitator • Connector/oxygen Tubing • Additional Accessories (airway, Mouth Opener) -6- Lot 3--laboratory Supplies --abc: ₱ 460,000.00 Warranty Period: 6 Months 8. Set Prepared Slides – Parasitology 1) Bloodstream Trypanosomes Smear 2) Giardia Lamblia Trophozoite W.m 3) Giardia Lamblia Cyst W.m 4) Trichomonas Vaginalis Trophozoites W.m 5) Trichomonas Vaginalis W.m 6) Ascaris Male T.s 7) Ascaris Female T.s 8) Ascaris Male And Female T.s 9) Eggs Of Fasciolopsis Buski W.m. 10) Fleas W.m. 11) Trichinella Larvae Cysts Sec.(he) 12) Human Lice W.m. 13) Mosquitos W.m. 14) Mosquito Female Mounth Parts. W.m 15) Taenia Sec 16) Clonorchis Sinensis Adults W.m 17) Clonorchis Sinensis Adults T.s 18) Egg Of Clonorchis Sinensis W.m (natural Color) 19) Clonorchiasis Liver Sec(he) (he 20) Mites W.m. 21)trichinella Larvae W.m 22) Egg Of Fasciola Hepatica W.m 23) Mixed Eggs W.m 24) Egg Of Ancylostomaduodenale 25) Eggs Of Mosquito W.m. 26) Chrysalides Of Mosquito W.m. 27) Ascaris Equina Eggs 28) Horse Roundworm Mitosis 29) Schistosoma Japonicum(female)w.m. 30) Schistosoma Japonicum(male)w.m. 31) Sexual Mosaic Of Schistosoma Japonicum W.m. 32) Eggs Of Schistosoma Japonicum W.m.(natural Color) 33) Tapeworm Eggs W.m (natural Color) 34) Ixodes Adult W.m 35) Sandfly Adult (female) W.m 36) Sandfly Adults (male) W.m 37) Mosquito Leg W.m. 38) Mosquito Larva W.m. 39) Mosquito Wing W.m. 40) Ascaris Ova W.m. 41) Ascaris Fertilized Egg W.m 42) Mixed Eggs W.m(trematodes Eggs) 43) Mixed Eggs W.m（tapeworm Eggs) 44) Mixed Eggs W.m(nematode Eggs) 45) Culex (female) Mouthparts W.m. 46) Culex (male) Mouthparts W.m 47) Pinworm Eggs W.m (natural Color) 48) Hookworm Eggs W.m (natural Color) 49) Plasmodium Vivax W.m 50) Plasmodium Falciparum W.m -1- 9. Set Prepared Slides – Histology 1) Simple Squamous Epithelium Sec. 2) Simple Cuboidal Epithelium Sec. 3) Simple Columna Epithelium Sec 4) Columna Pseudo Strtified Cillated Epithelium 5) Stratified Squamous Epithelium Sec 6) Transitinl Epethelium Sec 7) Ciliated Epithelium 8) Epidermis From Human Mouth 9) Glandular Epithelium Sec 10) Loose Connective Tissue W.m 11) Dense Connective Tissue W.m 12) Adipose Tissues Sec. 13) Hyaline Cartilage Sec. 14) Elastic Cartilage Sec. 15) Fibro Cartilage Sec. 16) Human Chromosome Nonmal Female W.m 17) Human Chromosome Nonmal Male W.m 18) Medulla Oblongata Sec 19) Red Marrow Smear 20) Smooth Muscle Teased Preparation W.m 21) Blood Smear 22) Hair Whole Mount 23) Smooth Muscle L.s And C.s 24) Skeletal Muscle L.s And C.s 25) Cardiac Muscle Sec 26) Spinal Card L.s And C.s 27) Sciatic Nerve L.s. 28) Motor Neuron W.m 29) Motor Nerve Endings W.m 30) Tongue L.s. Show Filiform Papilla 31) Esophagus Sec. 32) Trachea Sec. 33) Stomach Sec.05/27/2024 34) Stomach Fundic Portion Sec. 35) Stomach Cardiac Region Sec. 36) Stomach Pyloric Region Sec. 37) Small Intestine C.s 38) Duodenum Sec. 39) Jejunum Sec. 40) Ileum C.s. Show Villi And Goblet Cells 41) Appendix Sec. 42) Large Intestine Sec. 43) Colon Sec. 44) Rectum Sec. 45) Pancreas Sec. 46) Spleen Sec. 47) Liver Sec 48) Gall Bladder Sec 49) Fat Layer 50) Fibroblast 51) Nerve Cells 52) Brochiolus 53) Lung Sec 54) Artery Sec 55) Vein Sec 56) Large Artery Sec 57) Large Vein Sec 58) Heart L.s.whole 59) Kidney L.s 60) Kidney With Blood Vessel Injected Sec. 61) Ureter Sec. 62) Ovary Sec. 63) Placenta Human Sec. 64) Human Sperms Smear 65) Epididymis Sec 66) Prostate Gland Human Sec. 67) Fallopian Tube Sec 68) Penis C.s 69) Cervix Sec 70) Thyroid Gland Sec 71) Thymus Gland Sec 72) Mammary Gland Sec 73) Adrenal Gland Sec 74) Lymph Node Sec 75) Salivary Gland C.s. 76) Cerebrum Sec 77) Cerebellum Sec 78) Pituitary Gland C.s. 79) Tendon Teased C.s. 80) Eye Entail Sec 81) Eyeball Sec 82) Human Skin Sec Show Thick Cornifie Layer 83) Human Skin Sec Through Sweat Gland 84) Human Skin Sec Through Hair Folicle 85) White Fibrous Tissue 86) Mucous Tissue Umbilical Cord 87) Decalcified Bone C.s. 88) Infant Developing Bone Section 89) Developing Membrane Bone 90) Muscle-tendon Junction L.s. 91) Muscle Spindle 92) Nerve Bundle 93) Sympathetic Ganglion 94) Motor Cortex Section 95) Sentor Cortex 96) Cerebellar Cortex 97) Palatine Tonsil 98) Thin Skin From Human Palm Section 99) Finger Nail Section 100) Stomach -duodenal Junction L.s. -2- 10 Set Prepared Slides – Pathology 1) Cardiac Hypertrophy 2) Prostatic Hyperplasia 3) Bronchial Epithelial Squamous Metaplasia 4) Liver Degeneration Water 5) Hepatic Steatosis 6) Hyaline Degeneration Of The Central Splenic Artery 7) Renal Artery Hyaline Degeneration 8) Myxoid Degeneration 9) Brain Liquefaction Necrosis 10) Bronchiectasis 11) Ossification Health 12) Intestinal Metaplasia 13) Pathological Calcification 14) Adenocarcinoma 15) Tubular Epithelial Edema 16) Cloudy Swelling Of The Kidney 17) Granulomatous Inflammation 18) Lymph Caseous Necrosis 19) Brown Myocardial Atrophy 20) Edema Of Renal Tubular Epithelial Cells 21) Splenic Arterioles Hyalinization 22) Splenic Capsule Hyaline Degeneration 23) Signet Ring Cell Carcinoma 24) Scar Tissue 25) Callus 26) Chronic Pulmonary Congestion 27) Acute Hepatic Congestion 28) Chronic Hepatic Congestion 29) Transparent Thrombosis 30) Pulmonary Hemorrhagic Infarction 31) Pulmonary Edema 32) Splenic Infarction Anemia 33) Pulmonary Congestion And Edema 34) Thrombus 35) Venous Thrombosis 36) Lymph Node Inflammation Bleeding 37) Lymph Node Cancer 38) Necrotizing Lymphadenitis 39) Malignant Lymphoma 40) Lymph Node Tb 41) Lymph Node Metastatic Cancer 42) Myocardial Infarction 43) Cellulose Pleurisy 44) Appendix Cellulitis 45) Liver Abscess 46) Renal Abscess 47) Abscess 48) Chronic Granulomatous 49) Bacterial Myocarditis 50) Chronic Appendicitis 51) Acute Hemorrhagic Pancreatitis 52) Chronic Cholecystitis 53) Inflammatory Polyps 54) Liver Cyst Formation 55) Fiber Pericarditis With Machine-oriented 56) Dysentery 57) Ecm 58) Foreign Body Granuloma 59) Various Inflammatory Cells 60) Suppurative Appendicitis 61) Intestinal Polypoid Adenomas 62) Squamous Cell Carcinoma 63) Hard Breast Cancer 64) Lipoma 65) Liposarcoma 66) Fibroma 67) Fibrosarcoma 68) Leiomyoma 69) Leiomyosarcoma 70) Malignant Cells 71) Fibroadenoma 72) Cutaneous Squamous Cell Carcinoma 73) Mucinous Carcinoma Of The Stomach 74) Basal Cell Carcinoma 75) Esophageal Squamous Cell Carcinoma 76) Colon Adenocarcinoma 77) Melanoma 78) Aortic Atherosclerosis 79) Capillary Hemangioma 80) Hepatic Cavernous Hemangioma 81) Coronary Atherosclerosis 82) Primary Particulate Contracted Kidney 83) Fibrinoid Necrosis Of The Vessel Wall" 84) Chronic Bronchitis 85) Diffuse Emphysema 86) Lobar Pneumonia (hemorrhagic Edema Period) 87) Lobar (red Hepatic Phase) 88) Lobar (gray Hepatic Phase) 89) Lobar (dissolved Dissipate Period) 90) Bronchopneumonia (lobular Pneumonia) 91) Interstitial Pneumonia 92) Viral Pneumonia 93) Silicosis 94) Squamous Cell Carcinoma Of The Lung 95) Small Cell Lung Cancer 96) Lung Adenocarcinoma 97) Lung Cancer 98) Nasal Polyps 99) Acute Pulmonary Hemorrhage 100) Smoking Lung 101) Tuberculosis 102) Lung Adenocarcinoma 103) Tb Caseous Necrosis 104) Miliary Tuberculosis 105) Emphysema 106) Tuberculous Pleurisy 107) Tubercles 108) Caseous Pneumonia 109) Cellulose Pneumonia 110) Intestinal Adenomas 111) Chronic Atrophic Gastritis 112) Chronic Superficial Gastritis 113) Gastric Adenocarcinoma 114) Acute Simple Appendicitis 115) Colon Cancer 116) Viral 117) Chronic Active Hepatitis 118) Subacute Severe Hepatitis 119) Acute Severe Hepatitis 120) Alcoholic Hepatitis 121) Portal Cirrhosis 122) Biliary Cirrhosis 123) After Necrotic Cirrhosis 124) Bacillary Dysentery 125) Hepatic Congestion 126) Hcc 127) Liver Schistosomiasis 128) Liver Edema 129) Well Differentiated Intestinal Adenocarcinoma 130) Differentiated Intestinal Adenocarcinoma 131) Poorly Differentiated Intestinal Adenocarcinoma 132) Villous Colon Adenocarcinoma 133) Common Type Of Acute Hepatitis 134) Small Nodular Cirrhosis 135) Cloudy Swelling Of The Liver 136) Non-hodgkin's Lymphoma 137) Hodgkin's Lymphoma 138) Renal Cell Carcinoma 139) Wilms' Tumor 140) Btcc 141) Renal Tuberculosis 142) Renal Atrophy Oppression 143) Kidney Cancer 144) Bladder Cancer 145) Hypertensive Renal 146) Chronic Nephritis 147) Acute Nephritis 148) Interstitial Nephritis 149) Chronic Pyelonephritis 150) Acute Pyelonephritis 151) Chronic Glomerulonephritis 152) Acute Glomerulonephritis 153) Diffuse Proliferative Glomerulonephritis 154) Diffuse Sclerosing Glomerulonephritis 155) Endometrial Hyperplasia 156) Uterine Leiomyoma 157) Squamous Cell Carcinoma Of The Uterus 158) Uterine Cancer 159) Endometrial Adenocarcinoma 160) Papillary Serous Ovarian Adenocarcinoma 161) Ovarian Mucinous Cystadenoma 162) Ovarian Cysts 163) Adenofibroma 164) Breast Fiber Adenosis 165) Invasive Ductal Carcinoma 166) Acne Breast Cancer 167) Testicular Seminoma 168) Prostate Cancer 169) Breast Cancer 170) Mole 171) Ovarian Cysts 172) Ovarian Cancer 173) Chronic Cervicitis 174) Cervical Erosion 175) Genital Warts 176) Endometriosis 177) Teratoma 178) Endemic Goiter 179) Toxic Goiter 180) Thyroid Adenoma 181) Thyroid Cancer 182) Papillary Thyroid Carcinoma 183) Thyroid Follicular Carcinoma 184) Adrenocortical Adenoma 185) Simple Goiter 186) Fibrous Thyroiditis 187) Purulent Meningitis 188) Japanese Encephalitis 189) Meningioma 190) Neurofibromatosis 191) Astrocytoma 192) Osteosarcoma 193) Giant Cell Tumor Of Bone 194) Chondrosarcoma 195) Mixed Parotid Tumor 196) Skeletal Muscle Atrophy, 197) Atypical Hyperplasia 198) Lung Fleshy Change 199) Gout Nodules -1- 11 Set Prepared Slides - Microbiology 1) Rhizopus Nigricans W.m. 2) Saccharomycetes W.m 3) Penicillium W.m. 4) Aspergillus W.m. 5) Bacteria 3types Smear (staphylococcus, Pseudonmonas & Spirillum) 6) Staphylococcus Smear 7) Stomatococcus Smear 8) Escherichia Coli Smear 9) Bacillus Subtilis Smear 10) Bacillus Subtilis Smear(show Spore) 11) Actinomycete W.m 12) Bread Mould, Show Hyphae&sporew.m. 13) Aspergillus,show Hyphae&sporew.m. 14) Rhizopus Stolonifer W.m. 15) Staphylococcus Aureus Smear 16) Tetrads Smear 17) Sarcina Smear 18) Proteus Vulgaris Smear 19) Bacteria In Yoghourt Smear 20) Bac.thuringiensis Smear 21) Acetobacter Aceti Smear 22) Bacillus Rhusiopathiae Suis Smear 23) Pasteurella Maltocida Smear 24) Staphylococcus Epidermis Smear 25) Septate Hypha Smear 26) Nonseptate Hypha Smear 27) Azotobacter Chroococcum(show Capsule)smear 28) Large Spore Bacilli Smear 29) Proteus Bacilus Smear Show Flagella 30) Large Conidiophore 31) Small Conidiophore 32) Streptococcus Di-pneumoniae Smear 33) Gonorrhea Di-pneumoniae Smear 34) Salmonella Typhi Smear(show Flagella) 35) Corynebacterium Diphtheriae Smear 36) Yellow Micrococcus Smear 37) Mycobacterium Tuberculosis Smear 38) Pseudomonas Aeruginosa Smear 39) Bacillus Pertussis Smear 40) Aerobacter Smear(show Capsule) 41) Clostridium Tetani Smear Show Spore 42) Bacillus Anthracis Smear 43) Rat Plague Bacilli Smear 44) Hamulus Of Leptospira Smear 45) Candida Albicans 46) Single Flagellum W.m. 47) Double Flagellum W.m. 48) Comma Bacillus W.m. 49) Shigella Sonnei Smear 50) Botulinum W.m 51) Nei-sseria Meningitidis Smear 52) New-type Cryptococcus W.m. 53) Neisseria Gonorrhoeae Smear(pus) 54) Neisseria Gonorrhoeae Smear(pure Cultivate) 55) Bacillus Anthracis Smear(curly-hair Shape Colony) 56) Salmonella Typhi Smear 57) Bacillus Cereus W.m. 58) Spirillum W.m. 59) Mycobacterium Tuberculosis 60) Saprolegnia W.m 61) Mucor 62) Rhizobium 63) Agaric 64) Cup Fungi 65) Bacillus 66) Lactobacillus 67) Lactobacillus Bulgaricus 68) Lactobacillus Casei 69) Bread Bacteria 70) Cheese Bacteria 71) Mycobacterium Tuberculosis Cultures Smear 72) Mycobacterium Tuberculosis Sputum Smear-positive Acid Fast Staining 73) Pasteurella Pseudotuberculosis Cultures Smear 74)chicken Pasteurella Smear 75) Salmonella Enteritidis 76) Circuitous Spirochetes 77) Dysentery Bacillus 78) Sonnei 79) Haemophilus Influenza 80) Fusobacterium 81)oral Bacteria 82) Bifidobacterium 83) Cocci 84) Yellow Micrococcus 85) Nisin 86) Streptococcus Pyogenes 87) Streptococcus Pyogenes Long Chain 88) Streptococcus Pyogenes Short Chain 89) Streptococcus Faecalis(cultures) 90) Streptococcus Pyogenes 91) Pneumococcal 92) Streptococcus Pneumonia 93) Neisseria(cultures) 94) Pseudomonas Solanacearum 95) Aerobacter Smear 96) Bacillus Mycoides 97) Salmonella White Diarrhea 98) Proteus Vulgaris 99) Proteus 100) Crimson Rhodospirillum -2-