Software Tenders

Details: 10/11/2024 - Update the Purpose Of This Notice Is To Update The Collective Bargaining Agreements (cbas) Portfolio With Three Additional Cbas. The Updated Portfolio Has Been Released As Controlled Unclassified Information (cui). 07/19/2024 - Update the System For Award Management Interested Vendors List (ivl) For Socs Is Experiencing Intermittent Availability And Other Technical Issues. Interested Vendors Have Reported Issues Accessing The Ivl, And Currently, The Ivl Displays Only 10 Of 21 Interested Vendors. The Government Is Investigating This Issue. In The Interim, An Interested Vendors List Will Be Maintained By The Contracting Officer As A Controlled File And Updated At Least Weekly. The Controlled File Will Be Populated With Information From The Ivl. The Contracting Officer Will Compare The Controlled File And The Ivl At Least Weekly. If You Have Experienced, Or Are Experencing, Technical Issues Adding Your Contact Information To The Ivl, You May Send The Following Information To The Socs Email Address For Inclusion On The Controlled File: company Name And Address contact Name, Email Address, And Phone Number unique Entity Id (sam) cage Code if You Would Like To Be Removed From The Controlled File, You May Submit A Request To The Socs Email Address. The Controlled File Will Be Taken Down At The Close Of The Solicitation. 07/16/2024 - Update the Purpose Of This Notice Is To Revise The Preliminary Schedule For Socs. for Planning Purposes, The Government Anticipates: rfp Release: On Or About August 29, 2024 proposal Due Date: On Or About October 31, 2024 contract Award: On Or About June 30, 2025 contract Start: October 1, 2025 07/15/2024 - Update the Purpose Of This Notice Is To Post The Collective Bargaining Agreements Ascontrolled Unclassified Information (cui) Documents To Sam.gov. 05/28/2024 - Update the Purpose Of This Notice Is To Post Controlled Unclassified Information (cui) Documents (drfp 80ksc023r0024 Socs Cui Documents - Portfolio) To Sam.gov. 05/24/2024 - Update the Purpose Of This Notice Is To Post The Draft Request For Proposal (drfp) For Spaceport Operations And Center Services (socs). Potential Offerors Are Requested To Review And Comment On The Drfp. Refer To The Memorandum To Potential Offerors Within The Portfolio, “drfp 80ksc023r0024 Solicitation” For More Information. this Notice Is Not A Request For Proposal (rfp). No Proposals Are To Be Submitted In Response To This Notice. No Rfp Exists; Therefore, Do Not Request A Copy Of The Rfp. Any Subsequent Rfp Will Be Synopsized Prior To Its Release And Published On Https://sam.gov. It Is The Offeror’s Responsibility To Monitor This Site For The Release Of The Rfp And Any Amendments. Offerors Are Responsible For Downloading Their Own Copy Of The Rfp And Any Amendments, When Released.  for Planning Purposes, The Government Anticipates: rfp Release: On Or About July 29, 2024 proposal Due Date: On Or About September 27, 2024 contract Award: On Or About June 10, 2025 contract Start: October 1, 2025 the Government Anticipates Hosting The Following Industry Engagement Opportunities: virtual Drfp Overview: On Or About May 31, 2024 presolicitation Conference And On-site Tour: June 2024 virtual One-on-ones With Interested Prime Offerors: June 2024 additional Information And Registration Instructions For The Above Industry Engagement Opportunities Will Be Available On The Socs Website At: Https://public.ksc.nasa.gov/socs/. the Socs Bidders Library Of Technical Documents, Reference Documents, Historical Information, And Other Workload Indicator Data Can Be Accessed At The Above Link. Controlled Documents Will Be Posted On Https://sam.gov. 03/13/2024 - Update the Purpose Of This Notice Is To Correct The Socs Email Address:ksc-socs-info@mail.nasa.gov. 03/07/2024 - Update in Preparation For Communicating Socs Requirements, A Preliminary Schedule And Bidder’s Library Is Now Available. for Planning Purposes, The Contracting Officer Anticipates: draft Solicitation Release: Mid-april 2024 solicitation Release: Mid-june 2024 proposal Due Date: Late-august 2024 contract Award: No Earlier Than Q1 2025 contract Start: October 2025 this Preliminary Schedule Is Provided For Planning Purposes Only And Shall Not Be Construed As A Commitment By The Government. As Of This Date, No Solicitation Exists; Therefore, Do Not Request A Copy Of The Solicitation. If A Solicitation Is Released It Will Be Synopsized On Https://sam.gov/. Interested Firms Are Responsible For Monitoring This Website For Release Of Any Solicitation Or Synopsis. interested Firms May Access The Socs Bidders Library Of Uncontrolled Technical Documents, Including Historical Data And Other Information, Via Https://public.ksc.nasa.gov/socs/. Controlled Documents Will Be Available Within This Notice. Interested Firms Are Responsible For Monitoring These Sites For Any New Or Revised Documents. to Facilitate Subcontracting, The Contracting Officer Encourages Interested Firms To Register On The Interested Vendors List Available With This Notice. Reference To The Interested Vendors List Is Neither An Endorsement Nor Representative Of A Preference, By Nasa, For Any Of The Listed Companies. the Contracting Officer Intends To Update This Notice To Announce Future Industry Engagement Opportunities With The Socs Requirements Development Team/source Evaluation Board (e.g. One-on-one Meetings, Site Visits, Presolicitation And Preproposal Conferences). 09/11/2023 - Update on August 23, 2023, Nasa/ksc Issued Sources Sought Notice 80ksc023k0024, Which Solicited Information From Potential Sources Capable Of Providing Spaceport Operations And Facilities Support Services Under A Contemplated Socs Contract. The Purpose Of This Update Is To Extend The Response Date For Capability Statements And Strategy Feedback To September 14, 2023, And To Advise That Nasa/ksc Will Provide Interested Parties An Opportunity To Meet With The Socs Requirements Development Team. the Purpose Of One-on-one Meetings Is To Provide An Opportunity For Interested Parties To Elaborate On Any Comments And Recommendations To Section 4, Strategy Feedback, Of The Notice, To Enhance The Nasa/ksc’s Understanding Of Industry Feedback And Capabilities. Nasa/ksc Invites Respondents To Contact The Contracting Officer Via Email Not Later Than September 21, 2023, To Schedule A One-on-one Meeting. Meetings Will Take Place From 9 A.m. To 5 P.m. Et, Starting The Week Of September 25, 2023, Via Conference Call Or Microsoft Teams. Meetings Will Not Exceed 30 Minutes In Length. You Are Requested To Provide The Names And Title Of Each Individual Who Will Attend (to Include Your Respective Contract Manager(s) Or Administrator(s)). section 1: Introduction the National Aeronautics And Space Administration (nasa) Kennedy Space Center (ksc) Is Hereby Soliciting Information From Potential Sources Capable Of Providing Spaceport Operations And Facilities Support Services, Including Managing Facilities, Infrastructure, And Utilities Primarily At Ksc And Cape Canaveral Space Force Station (ccsfs); Coordinating The Use Of Various Facilities By Nasa And Other Spaceport Users; And Providing Logistics Services Under A Single Spaceport Operations And Center Services (socs) Contract. the Socs Contract Will Succeed Ksc’s Base Operations And Spaceport Services, Or Boss, Contract; However, Complete Requirements Under The Performance Work Statement Are To Be Defined. Requirements Contemplated Under The Socs Contract Include, But Are Not Limited To, The Following, Which Are Based On The Best Information Available At The Time Of Publication And Is Subject To Revision: maintenance And Operations Of Facilities, Systems, Equipment, And Utilities (fseu) management Of An Integrated Operations Center To Include Work Control engineering And Related Support Services center Logistics Services other Services each Area Is Summarized In Section 2. the Socs Contract Is Expected To Support Over 30 Customers, Including Nasa, The United States Space Force, Other Government Agencies, And Commercial Customers, Across Approximately 220 Square Miles, Primarily At Ksc, Florida, And Ccsfs, Florida. Performance Under The Socs Contract Is Anticipated To Commence No Earlier Than April 2025. nasa Ksc Is Seeking Capability Statements From All Interested Parties, Including All Socioeconomic Categories Of Small Businesses And Historically Black Colleges And Universities/minority Institutions, And Members Of The Underserved Communities As Defined By Executive Order 13985, Advancing Racial Equity And Support For Underserved Communities Through The Federal Government, For The Purposes Of Determining The Appropriate Level Of Competition And/or Small Business Subcontracting Goals For The Socs Acquisition. The Government Reserves The Right To Consider A Small Business, 8(a) Small Business, Women-owned Small Business, Veteran-owned Or Service-disabled Veteran-owned Small Business, Economically Disadvantaged Women-owned Small Business, Or Historically Underutilized Business Zone Set-aside Based On Responses Received. interested Companies Possessing Capabilities Relevant To The Requirements Contemplated In Section 2 Should Submit A Capability Statement Of No More Than 10 Pages And No Greater Than 3mb, Indicating The Ability To Perform All Aspects Of The Effort. A Page Is Defined As One Side Of A Sheet, 8 1/2" X 11", With At Least 1-inch Margins On All Sides, Using Not Smaller Than 12-point Type. Foldouts Count As An Equivalent Number Of 8 1/2" X 11" Pages. Responses Must Be Submitted Electronically In Portable Document Format (pdf) With Searchable Text. The Capability Statement Should Include: company’s Name, Address, And A Point Of Contact (name, Title, And E-mail Address) unique Entity Identifier And Commercial And Government Entity (cage) Code number Of Years In Business, Annual Receipts, And The Period Of Measurement Used (see 13 Cfr 121.104(c)) company’s Size And Socioeconomic Status Under Naics 561210, Facilities Support Services, With A Size Standard Of $47 Million ownership, Affiliate Information (as Applicable) Including Parent Company And Joint Venture Partners interest As A Prime Or Subcontractor company’s Specific Capabilities That Are Relevant To The Requirements Contemplated In Section 2. It Is Not Sufficient To Provide Brochures Or Generic Information. Capability Statements Must Include The Company’s Specific Area(s) Of Interest, As Well As Reference To Any Contracts Performed During The Last Five Years That Are Applicable To Those Areas. For Each Contract, Identify The Contract Number, Agency Or Customer, Period Of Performance, The Company’s Role (i.e., Prime Or Subcontractor), And Contract Or Subcontract Value. statement Indicating Whether The Requirements Contemplated In Section 2 Are Considered Commercial Services. A Commercial Service Is Defined In Far 2.101. the Government Has Enabled The Interested Vendor List Feature For This Notice. section 2: Services/scope maintenance And Operations: Maintenance Includes Performing Preventive Maintenance (pm), Predictive Testing And Inspection (pt&i), Reliability Centered Maintenance (rcm), Condition-based Maintenance (cbm), And Tiered Maintenance (see Nasa Interim Directive (nid) 8831 At Https://nodis3.gsfc.nasa.gov/main_lib.cfm) On Assigned Fseu In Approximately 900 Facilities Of Varying Complexity, As Well As Repairs And Replacement. Assigned Fseu Includes, But Is Not Limited To, High Voltage/medium Voltage Power; Low Voltage Power; Electronic Security Systems; Traffic Signaling Systems; Oxygen Deficiency Monitoring Systems; Fire Alarm Systems; Fire Suppression Systems; Heating Ventilation And Air Conditioning (hvac) And Compressed Air Systems; Elevators And Chairlifts; Plumbing; Water Distribution; Wastewater Collection And Pre-treatment; Stormwater Infrastructure; Facility Interiors And Exteriors; Structures And Towers; Transportation Infrastructure; Landfill, Borrow Pit, And Disposal Services; Heavy Equipment; And Various Control And Monitoring Systems. operations Include Those Recurring Activities Required To Maintain A Facility So That It Can Reliably Perform Its Intended Function, But Which Are Not Considered Pm, Repairs, Pt&i, Rcm, Cbm, And Tiered Maintenance. It Includes Watch Standing Or Attendance Type Work Requiring The Presence Of One Or More Qualified Persons During A Specified Time Period. Examples Of These Operations Include Adjusting Equipment Set Points, Resetting And Restarting Equipment, Isolating And Returning Equipment To Service, Recording Equipment Status, Monitoring Generators And Replenishing Fuel Levels, And Hurricane Preparation Activities. Operations Also Encompass Control And Monitoring Systems, Which Include System-specific Control Systems Such As A Supervisory Control And Data Acquisition (scada) System That Provides Central Control And Monitoring Of Various Facility Power Systems, Utility Systems, And Energy Management Systems Throughout Ksc, As Well As Multiple Building Automation Systems (bas), Which Monitor And Control Hvac Equipment And Monitor Environmental Conditions In Unique Processing Facilities. integrated Operations Center (ioc) And Work Control: Operation Of An On-site Ioc, 24 Hours A Day, 7 Days A Week, To Proactively Coordinate, Deconflict, Integrate, And Track Planned And Scheduled Operations For All Spaceport Customers. Planned And Scheduled Events Are Managed Using A Diverse Suite Of Software Integration Tools To Enable Coordination Among The Spaceport. Work Control Is Another Function Within The Ioc And Encompasses Workflow Management, Categorization, Prioritization, And Documentation Of All Work Requests Utilizing A Computerized Maintenance Management System (i.e., Maximo); Operation Of A Centralized Trouble Call System To Immediately Receive, Screen, Approve, Classify, Coordinate, And Initiate Responses To Trouble Calls; Mission Operations Integration With Spaceport Contractors; And Launch Readiness Management. engineering And Related Support Services: Engineering And Related Support Services Include System Engineering And Engineering Services Which Require The Qualifications Of Registered Professional Engineering; Environmental Regulatory Compliance For Managed Facilities And Operations; Configuration Management On Assigned Fseu; Activation And Turnover Services; Project Management And Design Engineering Services; Construction Support Services, Which Include Inspection Services And Coordination Of Shop Support Services; Site Planning And Excavation Support Services, Which Include Utility Locating, Surveying, Geographic Information System (gis); And Real Property Accountability And Facility Space Utilization Functions. center Logistics: Logistics Services Are Comprised Of Supply And Materials Management, Equipment Management, Disposal Management, And Transportation Management. supply And Materials Management Including Shipping And Receiving, Cataloging, Supply Record Administration Utilizing Internal Nasa Property Systems, Warehousing, Supply Inventory Management, Physical Inventory Management, Spare Parts Inventory Analysis, Material Storage And Issue, And Office Supply Program Management. equipment Management Including Shipping And Receiving, Cataloging, Classification And Control, Equipment Tagging, Equipment Record Administration Utilizing Internal Nasa Property Systems, Warehousing, Annual Physical Inventory Management At Ksc And Vandenberg Space Force Base, And Custodial Property Responsibilities For Installation Accountable Government Property Assigned Under This Contract. disposal Management Including Disposal Processing For All Government Property At Ksc, Reutilization Of Government Property, Disposal Inventory Management, Disposal Record Administration Utilizing Internal Nasa Property Systems, Property Screening Activities And Disposal Warehouse Management. transportation Management Including Vehicle Management, Heavy Equipment Management, Fuel Services Management, Intra-center Transportation And Delivery, Bus Services, Outbound Domestic And International Freight/shipping Services, And Packing And Crating Services. other Services: Other Requirements Contemplated Under The Socs Contract Include Construction (typically Under $1 Million Per Task), Facility System Launch Readiness And Mission Support, And Event Support (e.g., Event Layout And Design, Event Management, Crowd Control, Traffic Flow, Transportation, Event Set-up And Take Down). section 3: Strategy Feedback provide Feedback With Supporting Rationale For The Items Discussed Below. The Feedback May Be Used As Research Information To Support The Socs Contract Requirements Or Acquisition Strategy Development And Is Excluded From The Page Limitation Identified In Section 1. period Of Performance: Performance Under The Socs Contract Will Commence No Earlier Than April 2025, With A Potential Contract Length Of Approximately 5 To 10 Years, Although Currently Not Approved Beyond 5 Years. To Support Nasa’s Decision On The Period Of Performance, Provide A Recommended Period Of Performance For The Socs Contract, Including The Benefits Or Risks Of A Period Of Performance Greater Than 5 Years. pricing Approach: Provide Recommendations With Supporting Rationale Regarding The Method Of Pricing (e.g., Unit Or Category Pricing, Unit Pricing By Estimated Cost Ranges, Or Other) For Unscheduled Maintenance (i.e., Trouble Calls, Repairs, And Service Requests) For Unpredictable But Essential Activities Ranging From Simple Tasks Such As Replacing Stained Ceiling Tiles, Fixing A Slow-draining Sink, Or Restriping A Parking Lot, To More Complex Tasks Such As Replacing A 480-volt Uninterrupted Power Supply Or Repairing A Drawbridge. Ksc Averages Approximately 700 Trouble Calls, 300 Repairs, And 300 Service Requests Per Month Of Varying Complexities. provide Recommendations With Supporting Rationale For The Method Of Pricing For Known, Defined, And Recurring Requirements (e.g., Scheduled Maintenance). Ksc Averages Approximately 1,600 Pm And Pt&i Work Orders (combined Total) Per Month. contract Type: Identify And Describe The Contract Type(s) Considered Appropriate For The Socs Contract That Minimizes Resources And Administrative Burden On Both The Contractor And Government, And Possible Contract Incentives To Motivate Exceptional Performance. small Business Utilization: Provide Feedback Related To Possible Small Business Subcontracting Opportunities, Given The Possibility This Action May Be Competed On An Unrestricted Basis. What Challenges And Opportunities Should Nasa Consider To Maximize Opportunities For Small Business Concerns? If Applicable, This Feedback Would Be Used As Research To Support The Analysis And Development Of Subcontracting Goals. requirements: Provide Feedback And Recommendations, Including The Advantages, Disadvantages, And Risks On The Feasibility Of Contracting Separately For One Or More Of The Areas Identified In Section 2. section 4: Submission Information all Responses Shall Be Submitted Electronically Via Email To The Primary Point Of Contact Identified Below No Later Than September 11, 2023. Reference 80ksc023k0024 In Any Response. section 5: Executive Order (eo) 13985 in Support Of The Eo 13985, Advancing Racial Equity And Support For Underserved Communities Through The Federal Government, Nasa Is Seeking To Advance Equity Or Remove Barriers For Members Of Underserved Communities Related To This Requirement. As Defined In The Eo, Underserved Communities Refers To Populations Sharing A Particular Characteristic, As Well As Geographic Communities, That Have Been Systematically Denied A Full Opportunity To Participate In Aspects Of Economic, Social, And Civic Life, As Exemplified By The List In The Preceding Definition Of “equity.” Equity Means The Consistent And Systematic Fair, Just, And Impartial Treatment Of All Individuals, Including Individuals Who Belong To Underserved Communities That Have Been Denied Such Treatment, Such As Black, Latino, And Indigenous And Native American Persons, Asian Americans And Pacific Islanders And Other Persons Of Color; Members Of Religious Minorities; Lesbian, Gay, Bisexual, Transgender, And Queer (lgbtq+) Persons; Persons With Disabilities; Persons Who Live In Rural Areas; And Persons Otherwise Adversely Affected By Persistent Poverty Or Inequality. nasa Seeks Input In The Following Areas (which Is Separate From Capability Statements Requirements Specified Above And Not Subject To Page Limitation Specified In Section 1): to Support The Requirements Identified In This Request For Information (rfi)/sources Sought Notification, What Barriers Or Opportunities Exist To Engage Subject Matter Experts From Industry And Academia And How Can Those Barriers Be Overcome? How Can Underserved Communities Be Leveraged? to Support The Requirements Identified In This Rfi, What Barriers Or Opportunities Exist To Partner With Subcontractors That Employ Members Of Underserved Communities, As Defined Above? what Other Recommendations Would You Make To Enhance Diversity And Inclusion? what Should Be Considered To Encourage Full Participation And Contribution Of Organizations And Individuals (e.g., Outreach Efforts And Innovative Partnerships) In The Performance Of This Requirement? section 6: Other this Synopsis Is For Information And Planning Purposes Only And Is Not To Be Construed As A Commitment By The Government, Nor Will The Government Pay For Information Solicited. Respondents Will Not Be Notified Of The Results Of The Evaluation. no Solicitation Exists; Therefore, Do Not Request A Copy Of The Solicitation. If A Solicitation Is Released, It Will Be Synopsized On Sam.gov. Interested Firms Are Responsible For Monitoring This Website For The Release Of Any Solicitation Or Synopsis. nasa Far Supplement Clause 1852.215-84, Ombudsman, Is Applicable. The Procurement Ombudsman For This Acquisition Can Be Found At (reference Institutional Product Service Line Contract Activity: Facilities O&m): Https://www.hq.nasa.gov/office/procurement/regs/procurement-ombuds-comp-advocate-listing.pdf

Description: Item Unique Identification And Valuation (jan 2023)|19|||||||||||||||||||| higher-level Contract Quality Requirement (navicp Review Feb 1991)(feb 1999)|1|see Specification Section C| inspection Of Supplies--fixed-price (aug 1996)|2||| inspection And Acceptance - Short Version|8|x||x|||||| general Information-fob-destination|1|b| wide Area Workflow Payment Instructions (jan 2023)|16|material - Invoice & Receiving Report (combo) Certifications - Stand-alone Receiving Report |material - Inspection & Acceptance At Source Certifications - Inspection At Destination & Acceptance At Other |tbd |n00104|tbd|certifications - N39040; Material -s4306a |n50286|tbd|133.2|na|na|certifications N39040|na|na|see Dd Form 1423|port_ptnh_wawf_notification@navy.mil| navy Use Of Abilityone Support Contractor - Release Of Offeror Information (3-18))|1|| equal Opportunity (sep 2016)|2||| warranty Of Supplies Of A Noncomplex Nature (june 2003)|6|one Year From The Date Of Delivery |one Year From The Date Of Delivery ||||| warranty Of Data--basic (mar 2014)|2||| notice Of Total Small Business Set-aside (oct 2020)(deviation 2020-o0008)|1|| alternate A, Annual Representations And Certifications (nov 2023)|13|||||||||||||| buy American-balance Of Payments Program Certificate-basic (feb 2024)|1|| annual Representations And Certifications (feb 2024)|13|334514|750|||||||||||| notice Of Priority Rating For National Defense, Emergency Perpardeness, And Enrgy Progam Use (april 2008))|2||x| this Amendment Is Issued To Extend The Closing Date To 20nov2024. poc Updated To Benjamin.t.spangler.civ@us.navy.mil \ 1. The Resultant Award Of This Solicitation Will Be Issued Bilaterally, Requiring The Contractor's Written Acceptance Prior To Execution. 2. Any Contract/order Awarded As A Result Of This Solicitation Will Be A "do" Rated Order Certified For National Defense Use Under The Defense Priorities And Allocations System (dpas). See 52.211-14, Notice Of Priority Rating For National Defense, Emergency preparedness, And Energy Program Use. 3. If Drawings Are Included In The Solicitation, Access Must Be Requested On The Individual Solicitation Page On Contract Opportunities Via The Government's Sam.gov Website. Include Your Cage Code In Your Request. 4. Unless Otherwise Stated On The Dd1423, Submission Of Dd1423 Certification Data (cdrls) Will Be On Or Before 20 Days Prior To The Material Delivery Date. Pnsy Review/acceptance Of Cdrls Shall Be 6 Working Days After Receipt Of Cdrls. Final Delivery Of Material will Be On Or Before 365 Days After The Effective Date Of The Contract. \ 1. Scope 1.1 The Material Covered In This Contract/purchase Order Will Be Used In A Crucial Shipboard System. The Use Of Incorrect Or Defective Material Would Create A High Probability Of Failure Resulting In Serious Personnel Injury, Loss Of Life, Loss Of Vital shipboard Systems, Or Loss Of The Ship Itself. Therefore, The Material Has Been Designated As Special Emphasis Material (level I, Scope Of Certification, Or Quality Assured) And Special Control Procedures Are Invoked To Ensure Receipt Of Correct Material. 2. Applicable Documents 2.1 Order Of Precedence - In The Event Of A Conflict Between The Text Of This Contract/purchase Order And The References And/or Drawings Cited Herein, The Text Of This Contract/purchase Order Must Take Precedence. Nothing In This Contract/purchase Order, however, Must Supersede Applicable Laws And Regulations Unless A Specific Exemption Has Been Obtained. 2.2 Applicable Documents - The Document(s) Listed Below Form A Part Of This Contract/purchase Order Including Modifications Or Exclusions. 2.2.1 Specification Revisions - The Specification Revisions Listed Under "documents References" Below Are The Preferred Revision. Older And/or Newer R Evisions Are Acceptable When Listed Within Contract Support Library Reference Number Csd155 In Ecds (electric contractor Data Submission) At: Ht Tps://register.nslc.navy.mil/. This Is To Allow Contractors To Use Certain Acceptable Older Specification Revisions To Purge Their Existing Stock Of Material Certified To Those Older Revisions Or To Use Newer Specification revisions When Material Is Certified To Newly Released Revisions,without Requiring The Submittal Of Waiver/deviation Requests For Each Specification Revision On Every Contract. Revisions Of Specifications Reflecting Editorial And/or Re-approval (e.g. E2009, r2014, Etc.) Are Considered Inconsequential, But Are Acceptable When Their Revisions Are Listedwithin Csd155 Or Elsewhere Within This Contract. 2.2.2 "document References" Listed Below Must Be Obtained By The Contractor. Ordering Information Is Included As An Attachment To This Contract/purchase Order. 2.2.3 Documents, Drawings, And Publications Supplied Are Listed Under "drawing Number". These Items Should Be Retained Until An Award Is Made. drawing Data=2620-063x01 |96169| Z| |d|0001 | Z|49998|1188959 drawing Data=2620-063x01 |96169| Z| |d|0002 | K|49998|0055092 drawing Data=2620-063x01 |96169| Z| |d|0002.1 | U|49998|0051784 drawing Data=2620-063x01 |96169| Z| |d|0002.2 | Z|49998|0041964 drawing Data=2620-063x01 |96169| Z| |d|0003 | Z|49998|0050739 drawing Data=2620-063x01 |96169| Z| |d|0003.1 | Y|49998|0061088 drawing Data=2620-063x01 |96169| Z| |d|0004 | E|49998|0025743 drawing Data=2620-063x01 |96169| Z| |d|0005 | V|49998|0034080 drawing Data=2620-063x01 |96169| Z| |d|0006 | E|49998|0024816 drawing Data=2620-063x01 |96169| Z| |d|0007 | T|49998|0023186 drawing Data=2620-063x01 |96169| Z| |d|0008 | Z|49998|0031671 drawing Data=2620-063x01 |96169| Z| |d|0009 | E|49998|0013277 drawing Data=2620-063x01 |96169| Z| |d|0010 | G|49998|0052230 drawing Data=2620-063x01 |96169| Z| |d|0011 | V|49998|0026855 drawing Data=2620-063x01 |96169| Z| |d|0012 | L|49998|0019598 drawing Data=2620-063x01 |96169| Z| |d|0014 | N|49998|0023569 drawing Data=2620-063x01 |96169| Z| |d|0015 | N|49998|0026756 drawing Data=2620-063x01 |96169| Z| |d|0016 | Y|49998|0040392 drawing Data=2620-063x01 |96169| Z| |d|0017 | W|49998|0026167 drawing Data=2620-063x01 |96169| Z| |d|0019 | S|49998|0043231 drawing Data=2620-063x01 |96169| Z| |d|0020 | R|49998|0027157 drawing Data=2621-625-03 |96169|al| |d|0001 |al|00026|0000000 drawing Data=2621-826-01 |96169| L| |d|0001 | L|49998|0056754 drawing Data=2621-826-01 |96169| L| |d|0001.1 | K|49998|0087603 drawing Data=2621-826-01 |96169| L| |d|0001.2 | F|49998|0048315 drawing Data=2621-826-01 |96169| L| |d|0001.3 | K|49998|0040831 drawing Data=2621-826-01 |96169| L| |d|0002 | J|49998|0115015 drawing Data=2621-826-01 |96169| L| |d|0002.1 | L|49998|0078365 drawing Data=2621-826-01 |96169| L| |d|0003 | L|49998|0095443 drawing Data=2621-826-01 |96169| L| |d|0003.1 | L|49998|0061346 drawing Data=2621-826-01 |96169| L| |d|0004 | J|49998|0049359 drawing Data=2621-826-01 |96169| L| |d|0004.1 | J|49998|0055857 drawing Data=2621-826-01 |96169| L| |d|0004.2 | G|49998|0056977 drawing Data=2621-826-01 |96169| L| |d|0005 | G|49998|0045921 drawing Data=2621-826-01 |96169| L| |d|0005.1 | J|49998|0051959 drawing Data=2621-826-01 |96169| L| |d|0005.2 | J|49998|0026953 drawing Data=2621-826-01 |96169| L| |d|0006 | J|49998|0039854 drawing Data=2621-826-01 |96169| L| |d|0006.1 | J|49998|0049544 drawing Data=2621-826-01 |96169| L| |d|0007 | J|49998|0055631 drawing Data=2621-826-01 |96169| L| |d|0007.1 | J|49998|0043854 drawing Data=2621-826-01 |96169| L| |d|0008 | L|49998|0057162 drawing Data=2621-826-01 |96169| L| |d|0009 | J|49998|0038265 drawing Data=2621-826-01 |96169| L| |d|0009.1 | J|49998|0046414 drawing Data=2621-826-01 |96169| L| |d|0010 | J|49998|0055882 drawing Data=2621-826-01 |96169| L| |d|0011 | J|49998|0038680 drawing Data=2621-826-01 |96169| L| |d|0011.1 | J|49998|0048318 drawing Data=2621-826-01 |96169| L| |d|0012 | J|49998|0054340 drawing Data=2621-826-01 |96169| L| |d|0013 | -|49998|0042497 drawing Data=2621-826-01 |96169| L| |d|0014 | J|49998|0041679 drawing Data=2621-826-01 |96169| L| |d|0014.1 | J|49998|0045464 drawing Data=2621-826-01 |96169| L| |d|0015 | J|49998|0065125 drawing Data=2621-826-01 |96169| L| |d|0016 | J|49998|0050107 drawing Data=2621-826-01 |96169| L| |d|0017 | J|49998|0056740 drawing Data=2621-826-01 |96169| L| |d|0020 | J|49998|0039272 drawing Data=2621-826-01 |96169| L| |d|0020.1 | J|49998|0052709 drawing Data=2621-826-01 |96169| L| |d|0021 | J|49998|0051755 drawing Data=2621-826-01 |96169| L| |d|0022 | J|49998|0050796 drawing Data=2621-826-01 |96169| L| |d|0023 | J|49998|0055526 drawing Data=2621-826-01 |96169| L| |d|0024 | J|49998|0051328 drawing Data=2621-826-01 |96169| L| |d|0025 | J|49998|0051540 drawing Data=2621-826-01 |96169| L| |d|0026 | J|49998|0051775 drawing Data=2621-826-01 |96169| L| |d|0027 | J|49998|0051245 drawing Data=2621-826-01 |96169| L| |d|0028 | J|49998|0051640 drawing Data=2621-826-01 |96169| L| |d|0029 | J|49998|0051471 drawing Data=2621-826-01 |96169| L| |d|0030 | J|49998|0052425 drawing Data=2621-826-01 |96169| L| |d|0031 | J|49998|0053087 drawing Data=2621-826-01 |96169| L| |d|0032 | J|49998|0052840 drawing Data=2621-826-01 |96169| L| |d|0033 | J|49998|0053676 drawing Data=2621-826-01 |96169| L| |d|0034 | J|49998|0041353 drawing Data=2621-826-01 |96169| L| |d|0034.1 | J|49998|0054701 drawing Data=2621-826-01 |96169| L| |d|0035 | J|49998|0045398 drawing Data=2621-826-01 |96169| L| |d|0035.1 | J|49998|0041062 drawing Data=2621-826-01 |96169| L| |d|0036 | J|49998|0039718 drawing Data=2621-826-01 |96169| L| |d|0036.1 | J|49998|0054579 drawing Data=2621-826-01 |96169| L| |d|0037 | J|49998|0050272 drawing Data=2621-826-01 |96169| L| |d|0038 | J|49998|0040014 drawing Data=2621-826-01 |96169| L| |d|0038.1 | J|49998|0056214 drawing Data=2621-826-01 |96169| L| |d|0039 | J|49998|0055923 drawing Data=2621-826-01 |96169| L| |d|0040 | J|49998|0066638 drawing Data=2621-826-01 |96169| L| |d|0041 | K|49998|0037606 drawing Data=2621-826-01 |96169| L| |d|0041.1 | K|49998|0051430 drawing Data=2621-826-01 |96169| L| |d|0042 | K|49998|0043620 drawing Data=2621-826-01 |96169| L| |d|0043 | L|49998|0041012 drawing Data=2621-826-01 |96169| L| |d|0043.1 | L|49998|0037785 drawing Data=2621-826-01 |96169| L| |d|0043.2 | L|49998|0037958 drawing Data=2621-826-01 |96169| L| |d|0044 | L|49998|0046862 drawing Data=2621-826-01 |96169| L| |d|0044.1 | L|49998|0041040 document Ref Data=fed-std-h28 | | |b |190424|a| | | document Ref Data=fed-std-h28 |0020| |b |941221|a| |01| document Ref Data=ansi/asq Z1.4 | | | |080101|a| | | document Ref Data=qq-n-281 | | |d |851023|a|2 | | document Ref Data=astm-b369 | | | |200401|a| | | document Ref Data=mil-std-792 | | |f |060519|a| | | document Ref Data=sae Ams 5520 | | |e |980401|a| | | document Ref Data=iso_9001 | | | |081115|a| | | document Ref Data=iso10012 | | | |030415|a| | | document Ref Data=iso/iec 17025 | | | |050515|a| | | document Ref Data=mil-i-45208 | | |a |810724|a|1 | | document Ref Data=mil-std-45662 | | |a |880801|a| | | document Ref Data=a-a-59004 | | |b |081118|a| | | document Ref Data=ansi/ncsl Z540.3 | | | |130326|a| | | document Ref Data=0900-lp-001-7000 | | | |810101|c| |01| document Ref Data=s9074-aq-gib-010/248 | | |1 |191112|a| | | document Ref Data=t9074-as-gib-010/271 | | |1 |140911|a| | | document Ref Data=s9074-ar-gib-010a/278 (chg A) | | | |130214|a| | | 3. Requirements 3.1 ;the Venturi Meter Must Be Made In Accordance With General Dynamics Electric Boat Division Drawing 2621-826-01 Assembly 43a, Except As Amplified Or Modified Herein.; 3.2 ;retainer Ring From Assembly 43a Of Drawing 2621-826-01 Must Be Made From Sae Ams 5520.; 3.3 Material For Parts Requiring Certification - Quantitative Chemical And Mechanical Analysis Is Required For The Parts Listed Below Unless Specifically Stated Otherwise: part - ;venturi Body, Piece 44a Of Drawing 2621-826-01; material - ;astm B369, Uns C96400; part - ;venturi Valve, Piece 8a Of Drawing 2621-826-01; material - ;qq-n-281 With Mechanical Properties In Accordance With Note 18 Of Drawing 2621-826-01; part - ;hex Head Plug, Piece 7a Of Drawing 2621-625-03; material - ;qq-n-281 With Mechanical Properties In Accordance With Note 16 Of Drawing 2621-625-03; 3.4 Testing Certification - Certifications Are Required For The Following Tests On The Items Listed Below. Additional Testing On Other Piece Parts (if Any) Per Applicable Drawings And Specifications Is Still Required, But Certifications Are Only Required As listed Below. test - Non-destructive Tests item - ;weld Repair And/or Production Weld (as Applicable); performance - Per Applicable Fabrication Specification acceptance - Per Applicable Fabrication Specification test - ;hydrostatic Pressure Test; item - ;venturi Body, Piece 44a Of Drawing 2621-826-01; performance - ;note 9 Of Drawing 2621-826-01; acceptance - ;note 9 Of Drawing 2621-826-01; test - Weldability Test Of Astm-b369 Material item - ;venturi Body, Piece 44a Of Drawing 2621-826-01; performance - Astm-b369 acceptance - Astm-b369 test - Dye Penetrant Inspection part - Body Weld Ends In Final Machined Condition Including 1/2" Of Base Material performance - T9074-as-gib-010/271 acceptance - S9074-ar-gib-010a/278 3.5 The Pressure Tolerance Must Be As Specified In The Assembly Drawing, Detail Drawing, Design Specification Or Elsewhere In This Contract. Where Pressure Tolerances Are Not Provided By Drawings, Specifications Or Specified Elsewhere In This Contract, The following Must Be Used: For Pressure Tests Below 100 Psig, The Pressure Tolerance Must Be +1 Psig / -0 Psig. For Pressure Tests At Or Above 100 Psig Up To And Including 2500 Psig, The Pressure Tolerance Must Be +2% / -0 Psig Rounded Off To The Nearest Multiple Of The Smallest Graduation On An Analog Test Pressure Gauge, Not To Exceed 50 Psig. For Pressure Tests Above 2500 Psig, The Pressure Tolerance Must Be +2% / -0 Psig, Rounded Off To The Nearest Multiple Of The Smallest Graduation On An Analog Test Pressure Gauge, Not To Exceed 200 Psig. the Pressure Test Time Tolerance Must Be As Specified In The Assembly Drawing, Detail Drawing, Design Specification Or Elsewhere In This Contract. Where Pressure Test Time Tolerances Are Not Provided By Drawings, Specifications Or Specified Elsewhere In This contract, The Following Must Be Used: For A Test Duration Up To And Including 1 Hour, The Tolerance Must Be +5 Minutes / - 0 Minutes. For A Test Duration Of More Than 1 Hour Up To And Including 24 Hours, The Tolerance Must Be +30 Minutes / - 0 Minutes. For A Test Duration Of More Than 24 Hours, The Tolerance Must Be +60 Minutes / - 0 Minutes. 3.6 Specification Change - For Qq-n-281, Class B Material: 1 - Footnote 9 To Table Ii Of Qq-n-281 Does Not Apply. 2 - When Starting Material Is Round Bar Greater Than 3" Dia, The Mechanical Properties Of Hex Bar Apply. 3.7 O-ring Grooves And Mating Sealing Surfaces Must Be Inspected Per The Contractually Invoked Drawings Or Specifications. When The Drawings Or Specifications Do Not Provide Specific Defect Criteria Or State That No Defects Are Allowed, The General Acceptance criteria (gac) Standard Must Be Used For Inspecting O-ring Grooves And Mating Sealing Surfaces Only. Repairs To Sealing Surfaces And O-ring Grooves With Unacceptable Defects May Be Accomplished Within The Limits Of The Size And Tolerances Provided In The applicable Drawing. Repairs Thatwould Exceed These Limits Require Approval (including Final Dimensions). The Data That Is Red Lined (crossed Out) Is Excluded From The Gac For This Contract And Is Not To Be Used For Acceptance Or Rejection Criteria. The Gac document Is Identified As Contract Support Library Reference Number Csd008 At Https://register.nslc.navy.mil/ 3.8 Thread Inspection Requirements - All Threads On Threaded Parts Must Be Inspected Using Appropriate Inspection Methods, Inspection Systems, And Inspection Gages/instruments In Accordance With Fed-std-h28 Series. Substitution Of Thecommercial Equivalent inspection In Accordance With Asme B1 Series Is Acceptable. 3.8.1 System 21 Of Fed-std-h28/20 Must Be Used As A Minimum Inspection Requirement For Threads When The Design Drawing Or Design Specification Does Not Specify An Inspection Requirement. 3.8.2 For Navy And Shipyard Drawings, System 21 Of Fed-std-h28/20 May Be Substituted For System 22 Without Further Navy Approval When The Design Drawing Invokes System 22 And Does Not Cite Governing Specifications That Specifically Require System 22. System 22 of Fed-std-h28/20 Must Be Used When The Drawing References Other Governing Specifications That Specifically Require System 22, Such As Certain Thread Types Of Mil-dtl-1222. 3.8.3 A Written Request For Concurrence Must Be Submitted When Utilizing Alternative Measuring Equipment Or Measuring Systems Not Applicable To The Specified Inspection System. 3.9 Thread Lubricant - Thread Lubricants Containing Molybdenum Disulfide Must Not Be Used On This Material. Bacteria In Water, Especially Seawater, Causes Molybdenum Disulfide To Break Down. The By-products Of The Breakdown Form Compounds Which Attack The fasteners. Anti-galling Compound A-a-59004 Must Be Used As A Replacement When Thread Lubricant Is Required For Assembly. 3.10 Internal Threads - All Internal Threads Must Be Formed By Cutting. Cold Forming Of Internal Threads Is Not Acceptable. 3.11 Welding Or Brazing - When Welding, Brazing, And Allied Processes Are Required, As Invoked By Section C Paragraph 3 Requirements, They Must Be In Accordance With S9074-ar-gib-010a/278, 0900-lp-001-7000 For Brazing Of Piping And Pressure Vessel applications, Or S9074-aq-gib-010/248 For Brazing Of Other Applications. For All Production And Repair Welding And Brazing Personnel And Procedures Must Be Qualified Under S9074-aq-gib-010/248 Or 0900-lp-001-7000, As Applicable. Procedures And Qualification data Must Be Submitted For Review And Approval Prior To Performing Any Welding Or Brazing. 3.12 Certificate Of Compliance - (special Emphasis Material) The Contractor Must Prepare And Submit A Certificate Of Compliance Certifying That The Items/components Furnished Under This Contract Comply With The Requirements Of The Procurement Document, including Any/all Invoked Specifications And Drawings. 3.13 Configuration Control - The Contractor Must Maintain The Total Equipment Baseline Configuration. For Items Of Proprietary Design, Contractor Drawings Showing The Latest Assembly Configuration Must Be Provided To The Government In Electronic (c4) Format. definitions Are Provided Elsewhere In The Contract/purchase Order. 3.13.1 Waivers/deviations - All Waivers And Deviations, Regardless Of Significance Or Classification Require Review And Approval By The Contracting Officer. Waivers And Deviations Must Be Designated As Critical, Major, Or Minor. The Contractor Must Provide a Copy Of This Request To The Qar. Requests Must Include The Information Listed Below. A. A Complete Description Of The Contract Requirement Affected And The Nature Of The Waiver/deviation (non-conformance), Including A Classification Of Critical, Major, Or Minor. B. Number Of Units (and Serial/lot Numbers) To Be Delivered In This Configuration. C. Any Impacts To Logistics Support Elements (such As Software, Manuals, Spares, Tools, And Similar) Being Utilized By Government Personnel Or Impacts To The Operational Use Of The Product. D. Information About Remedial Action Being Taken To Prevent Reoccurrence Of The Non-conformance. 3.13.2 All Requests For Waivers/deviations On Navsup-wss Contracts Must Be Submitted To The Navsup Wss Contracting Specialist Via Email. 3.13.3 Ecps - The Government Will Maintain Configuration Control And Change Authority For All Modifications Or Changes Affecting Form, Fit, Function, Or Interface Parameters Of The Equipment And Its Sub-assemblies. The Contractor Must Submit An Engineering change Proposal (ecp) For Any Class I Or Ii Changes That Impact The Equipment Covered By This Contract. Ecps Must Be Prepared In Contractor Format, And Must Include The Following Information: A. The Change Priority, Change Classification (class I Or Class Ii), And Change Justification. B. A Complete Description Of The Change To Be Made And The Need For That Change. C. A Complete Listing Of Other Configuration Items Impacted By The Proposed Change And A Description Of The Impact On Those Cis. D. Proposed Changes To Documents Controlled By The Government. E. Proposed Serial/lot Number Effectivities Of Units To Be Produced In, Or Retrofitted To, The Proposed Configuration. F. Recommendations About The Way A Retrofit Should Be Accomplished. G. Impacts To Any Logistics Support Elements (such As Software, Manuals, Spares, Tools, And Similar) Being Utilized By Government Personnel In Support Of The Product. H. Impacts To The Operational Use Of The Product. I. Complete Estimated Life-cycle Cost Impact Of The Proposed Change. J. Milestones Relating To The Processing And Implementation Of The Engineering Change. 3.14 Mercury Free - Mercury And Mercury Containing Compounds Must Not Be Intentionally Added Or Come In Direct Contact With Hardware Or Supplies Furnished Under This Contract. Mercury Contamination Of The Material Will Be Cause For Rejection. 3.15 Navsea 0948-lp-045-7010 - Any Applicable Requirements Of Navships 4410.17,navsea 0948-lp-045-7010, Or 0948-045-7010 Which The Contractor Must Meet Are Included In This Contract/purchase Order. The Above Documents Are For Governmentuse Only. Further application Of The Above Documents Is Prohibited.prohibited. 3.15.1 Marking Of Material With A Material Designator Per The Drawing Is Also Prohibited, With The Exception Of Fasteners. Fasteners Must Be Marked With A Material Symbol/designator As Specified Elsewhere In This Contract. ^ Quality Assurance Requirements ^ 3.16 See Cdrl Di-misc-80678 (test Certification) - A Statement Of Tests Performed, Listing The Pieces Tested Must Be Furnished Along With A Copy Of The Test Results. Certification Must Include The Contractor's Name, Address And Date, Quantity Inspected, identified To The Contract/purchase Order And Item Number, And The Contractor's Or Authorized Personnel's Signature. Test Certifications Must Reference The Standard/specification, Including The Revision, To Which The Testing Was Performed And The Acceptance criteria Used. Test Procedure Numbers May Also Be Referenced On Test Reports. Test Reports On Weldments Must Be Identified To Weld Joint And Layer. 3.17 Quality System Requirements - The Contractor Furnishing Items Under This Contract/purchase Order Must Provide And Maintain A Quality System In Accordance With Iso-9001 As Amplified Or Modified Herein, With The Calibration System Requirements Of Iso-10012 or Ansi-z540.3 With Iso-17025. A Quality System In Accordance With Mil-i-45208, With The Calibration System Requirements Of Mil-std-45662, Is Acceptable As An Alternate. 3.17.1 The Contractor's Quality System And Products Supplied Under The System Are Subject To Evaluation, Verification Inspection, And Acceptance/nonacceptance By The Government Representative To Determine The System's Effectiveness In Meeting The Quality requirements Established In The Contract/purchase Order. 3.17.2 The Contractor's Quality System Must Be Documented And Must Be Available For Review By The Contracting Officer Or His Representative Prior To Initiation Of Production And Throughout The Life Of The Contract. The Prime Contractor Must, Upon notification, Make His Facilities Available For Audit By The Contracting Officer Or His Authorized Representative. 3.17.3 See Cdrl Di-qcic-81110 (inspection System Procedures) - All Suppliers Of Level I/subsafe (li/ss) Material Are Required To Submit A Copy Of Their Current Documented Quality System Procedures To The Procurement Contracting Officer (pco) Prior To Award Of any Contract/purchase Order. Suppliers That Have A Copy Of Their Current Quality System Procedures On File At The Procuring Activity May Request The Pco Waive This Requirement. 3.17.4 This Contract Provides For The Performance Of Government Quality Assurance At Source. The Place Or Places Of Performance May Not Be Changed Without The Authorization Of The Procurement Contracting Officer. Upon Receipt Of This Order, Promptly notify The Government Representative Who Normally Services Your Plant So That Appropriate Planning For Government Inspection Can Be Accomplished. If You Do Not Have An Assigned Government Representative, Notify The Nearest Defense Contract Management Agency (dcma) Office. In The Event That A Local Government Representative Or Dcma Office Cannot Be Located, Our Purchasing Agent Should Be Notified Immediately. 3.17.5 Any Changes Made By The Contractor To A Qualified Quality System Will Require Re-submittal To The Pco And Concurrence By The Government Quality Assurance Representative Prior To Adoption. 3.18 Contractor Inspection Requirements - The Contractor Must Maintain Adequate Records Of All Inspections And Tests. The Records Must Indicate The Nature And Number Of Observations Made, The Number And Type Of Deficiencies Found, The Quantities Approved And rejected And The Nature Of Corrective Action Taken As Appropriate. Inspection Records Must Be Traceable To The Material Inspected. 3.18.1 The Supplier's Gages, Measuring And Test Equipment Must Be Made Available For Use By The Government Representative When Required To Determine Conformance With Contract Requirements. When Conditions Warrant, The Supplier's Personnel Must Be Made available For Operations Of Such Devices And For Verification Of Their Accuracy And Condition. 3.18.2 All Documents And Reference Data Applicable To This Contract Must Be Available For Review By The Government Representative. Copies Of Documents Required For Government Inspection Purposes Must Be Furnished In Accordance With The Instructions Provided by The Government Representative. 3.19 Subcontractor Inspection Requirements - The Government Has The Right To Inspect At Source, Any Supplies Or Services That Were Not Manufactured Or Performed Within The Contractor's Facility. Such Inspection Can Only Be Requested By Or Under Authorization of The Government Representative. Any Purchasing Documents To A Subcontractor Must Cite The Applicable Portions Of The Contractually Invoked Quality System (e.g. Calibration Requirements), Plus Any Product Requirements That Apply To The Supplies Being purchased. When The Government Elects To Perform Source Inspection At The Subcontractor's Facility, Applicable Purchase Documents Must Be Annotated With The Following Statement: "a Government Inspection Is Required Prior To Shipment From Your Plant. Upon receipt Of This Order, Promptly Notify The Government Representative Who Normally Services Your Plant So That Appropriate Planning For Government Inspection Can Be Accomplished. If You Do Not Have An Assigned Government Representative, Notify The Nearest defense Contract Management Agency (dcma) Office. In The Event That A Local Government Representative Or Dcma Office Cannot Be Located, Our Purchasing Agent Should Be Notified Immediately." 3.19.1 The Prime Contractor's Program Must Include Procedures To Assess The Capability Of The Prospective Suppliers To Produce The Products Or Supply The Services In Accordance With The Contract, Prior To The Issuance Of Any Purchase Document. 3.19.2 Each Sub-tier Supplier Of Material Or Services For Items In Section 3 Of This Contract Must Be Subjected To A Periodic Review Or Audit By The Prime To Determine The Continued Capability Of The Supplier To Control The Quality Of The Products Or Services specified In The Purchase Order Or Contract. 3.19.3 The Prime Contractor Must Ensure That The Purchased Product Conformsto Specified Purchase Requirements And This Contract. The Type And Extent Of Control Applied To The Supplier And The Purchased Product Must Be Dependent Upon The Effect Of The purchased Product On The End Item Represented By This Contract. 3.19.4 The Prime Contractor Must Evaluate The Requirements Of The Contractand Select Suppliers Based On Their Ability To Supply The Product In Accordance With The Prime Contractor's Requirements And The Contract. Criteria For Selection And Evaluation Must Be established. Records Of This Effort Must Be Available For Review By The Government. 3.19.5 The Prime Contractor's Supplier Quality Assurance Program Must Provide For A Review Of Purchase Documents To Assure Applicable Quality Requirements Are Included Or Referenced In The Documentation For Compliance By The Supplier. 3.20 Government Furnished Material And/or Equipment (gfm/gfe) - When Material Or Equipment Is Furnished By The Government, The Contractor Must Develop Documented Control Procedures That Require At Least The Following: 3.20.1 Visual Examination Upon Receipt To Detect Damage During Transit. 3.20.2 Inspection For Completeness And Proper Type. 3.20.3 Verification Of Material Quality Received. 3.20.4 Periodic Inspection And Precautions To Assure Adequate Storage Conditions And To Guard Against Damage From Handling And Deterioration During Storage. 3.20.5 Functional Testing, Either Prior To Or After Installation, Or Both, As Required By The Contract To Determine Satisfactory Operation. 3.20.6 Identification And Protection From Improper Use Or Disposition. 3.20.7 Reporting To The Government, Any Gfm Or Gfe Property Found Damaged, Malfunctioning, Or Otherwise Unsuitable For Use. In The Event Of Damage Or Malfunction During Or After Installation, The Supplier Must Determine And Record Probable Cause And necessity For Withholding The Material From Use. 3.20.8 For Gfe Material, And As Required By The Terms Of The Bailment Agreement, The Supplier Must Establish Procedures For Adequate Storage, Maintenance, And Inspection Of Bailed Government Material. Records Of All Inspection And Maintenance Performed On bailed Property Must Be Maintained. 3.20.9 Material Returned To The Contractor Must Be Handled As Gfm. 3.21 Traceability And Certification Requirements - To Assure That Correct Materials Are Installed In Level I/subsafe Systems, It Is Imperative That Traceability Be Maintained From The Material To The Material Certification Test Report And Other Required objective Quality Evidence (oqe). The Material Certification Report Must Completely And Accurately Reflect That The Material Supplied Meets The Specified Requirements. Materials Requiring Traceability And Certification Data Are Identified Within Paragraph 3, section C Of This Contract/purchase Order. 3.21.1 The Following Provides The Minimum Requirements For Maintaining Material Traceability And Supplements The Requirements Specified In Di-misc-81020 And Elsewhere In The Contract/purchase Order. The Contractor Must Develop Written Procedures That implement The Material Control Requirements Stated Herein And Elsewhere In This Contract/purchase Order. 3.22 Material Traceability - The Certification Data Report Must Be Identified Through A Unique Traceability Number, Heat-lot Number, Or Heat-treat Number, As Applicable, Which Must Also Be Marked On The Material. This Traceability Marking On The Material Must provide Direct Traceability To The Material's Chemical Composition And Mechanical Properties Certification Data. For Material Produced By Batch, Continuous Cast, Or Continuous Pour Processes, Samples Must Be Taken No Less Than Once In Every Eight Hours Of operation For The Purpose Of Validating Proper Chemical Composition And Mechanical Properties. Traceability Must Be Maintained Through All Process Operations Including Any Subcontracted Operations, To The Finished Component. 3.22.1 Material Marking For Traceability And Identification - The Following Are The Minimum Marking Requirements. Additional/alternate Marking Requirements, If Applicable, Will Be Specified Elsewhere In The Contract/purchase Order. In Addition To The marking Requirements On Applicable Drawings And/or Specifications, Marking For Traceability Is Required. All Traceability Markings Must Be Permanently Applied In Accordance With Mil-std-792 (except As Specified Below). An Alternate Marking Method Is permissible Provided It Is An Available Option In The Contractually Invoked Specification Or Drawing, Except In Instances Where The Material Has Been Modified By This Contract/purchase Order And Differs From That Specified In The Specification Or Drawing. 3.22.2 Traceability Markings For Items With Precision Machined Or Plated Surfaces, Or Material With Suitable Marking Surface Areas Less Than 3/8 Inches Square (either 3/8" X 3/8" Or An Area Equal To 0.1406 Inches Square) Must Be Applied To A Durable Tag And the Tag Securely Affixed To The Material. 3.22.3 Traceability Markings Must Be Maintained Through Assembly, And Whenever Possible Must Be Visible After Assembly. For Items Where The Marking Is Not Visible After Assembly, A Durable Tag Must Be Securely Attached To The Assembly Identifying The Part number, Piece Number, Traceability Number, And The Location Of The Permanent Mark. 3.22.4 Marking Must Be Legible And Must Be Located So As To Not Affect The Form, Fit, And Function Of The Material. ; ; 3.23 See Cdrl Di-misc-81020 (chemical And Mechanical) - Material Certification - In Addition To The Certification Data Requirements Specified In Di-misc-81020, The Following Material Certification Requirements Apply: 3.23.1 Quantitative Chemical And Mechanical Analysis Of Material Traceable To Traceability Markings Is Required. Material Certification Test Reports Must Include The Class, Form, Condition, Grade, Type, Finish, And/or Composition, As Applicable, Of The material Supplied. 3.23.2 Re-identification And Re-certification Of Material Is Required When The Material Is Subjected To A Process Which Alters It's Properties. If The Starting Material Or Raw Stock Is Processed In A Manner That Will Not Affect Its Chemical Composition Or mechanical Properties, The Original Certifications For The Chemical Composition And Mechanical Properties, As Required By The Material Specification, Are Acceptable. Re-certification Of The Chemical Or Mechanical Properties Is Required If A Process Is Used during Fabrication That Alters The Original Properties Of The Material (e.g. Alloying, Heat Treating, Or Forming). In These Instances, The Properties Of The Material Must Be Re-determined And Documented To Reflect The Altered Condition. The Altered Material must Be Uniquely Re-identified. The Properties Thus Determined And Documented, Are Required For Final Certification And Must Conform To The Material Specification Or The Contract/purchase Order Requirements. When Only The Mechanical Properties Are Altered, the Original Certification Forchemical Composition Must Be Overstamped And Annotated With The Unique Traceability Material And At A Minimum Contain The Information Below. traceability Marking ________________________________________________ (marking On Finished Item) is Fabricated From Raw Material Identified To heat/lot Number ______________ And Heat Treat Number _____________________ (when Applicable) _________________________________________ Date _____________________ (name And Signature Of Auth. Co. Rep.) 3.23.3 Material Certification Data Forwarded By The Manufacturer Must Contain A Signed Certification That The Report Results Represent The Actual Attributes Of The Material Furnished And Indicate Full Compliance With All Applicable Specification And Contract requirements. Transcription Of Certification Data Is Prohibited. 3.23.4 Statements On Material Certification Documents Must Be Positive And Unqualified. Disclaimers Such As "to The Best Of Our Knowledge" Or "we Believe The Information Contained Herein Is True" Are Not Acceptable. 3.23.5 If Material Is Received Without The Required Certification Papers Or With Incorrect/missing Data On The Certification Papers, The Material Will Be Rejected. 3.24 Material Handling - The Written Material Control Process Must Include The Following: 3.24.1 All Raw Materials Must Have Traceability Markings (except As Specified Below). 3.24.2 Stored Raw Materials Requiring Traceability Must Be Segregated To Preclude Intermingling With Materials Not Requiring Traceability. 3.24.3 When Traceability Markings Will Be Removed By A Manufacturing Or Fabrication Process, The Marking Must Be Recorded Prior To Removal And Be Immediately Restored Upon Completion Of The Process. If This Cannot Be Done Or Is Impractical, An Appropriate material Control Procedure (such As A Bag And Tag, Tagging, And/or Tote Box Control) Must Be Employed. The Material Control Procedure Must Provide A Method Of Positive Control To Preclude Commingling Of Heats/lots Or Loss Of Traceability. The Traceability marking Must Be Reapplied Upon Completion Of The Final Manufacturing Process. 3.24.4 Brazing Or Weld Filler Metals For Strength Welds Forming Or Integral With Pressure Containing Components Or Assemblies Requiring Traceability Must Be Verified To Be The Correct Material, And Type Or Grade, As Applicable, Prior To Consumption. At A minimum, Material Verification Must Consist Of Inspection Of Material Test Reports For Conformance To Specified Requirements. Control Of Welding And Brazing Filler Metals Must Be Maintained To The Point Of Consumption To Assure Use Of The Correct Type And grade. Markings And Traceability Requirements Do Not Apply To Brazing And Weld Filler Metals After Consumption. It Is The Responsibility Of The Prime Contractor To Ensure Conformance With The Above Requirements On Welds Performed By Their Subcontractors. 3.24.5 Purchase Orders For Raw Material Must Specify That The Material Be Traceable To Material Certification Test Reports By Traceability Markings On The Material And Identified On The Test Reports. The Certification Data Requirements Contained In di-misc-81020 Must Be Invoked By The Prime Contractor On All Subcontractors Supplying Level I Material. 3.24.6 The Material Control Process Must Include Requirements For The Maintenance Of Traceability For Items Sent Out For Subcontracted Operations. If Such Operations Would Remove Traceability Markings, Purchase Or Work Orders Must Specify A Method And Marking location For Remarking. The Contractor Must Also Ensure That Subcontractor Production Controls Are Adequate To Preclude Commingling Of Materials During Processing. 3.25 Receiving Inspection - 3.25.1 Products And Services Produced By Sub-tier Suppliers For Incorporation In The Contract End Item Must Be Subject To Inspection Or Audit At The Time Of Receipt By The Prime Prior To Further Processing Within The Prime Contractor's Plant Or Shipment To another Location. 3.25.2 Receiving Inspection Must Include As A Minimum - verification That The Traceability Marking On The Material Agrees With That On The Certification Test Reports. verification That Certification Test Reports Are Legible And Complete. verification That The Contents Of The Certification Test Reports Are In Compliance With The Contractually Invoked Specifications And Requirements. 3.26 Discrepancy Reporting - 3.26.1 Nonconforming Products From Sub-tier Suppliers Must Be Identified And Processed In Accordance With The Prime Contractor's Procedures For Controlling Nonconforming Products. The Prime Contractor Must Report The Receipt Of Any Nonconforming Products To the Responsible Sub-tier Supplier In Accordance With Established Procedures. Nonconforming Material Records Must Be Maintained And Available For Review By The Government Quality Assurance Representative (qar). 3.27 Final Inspection - The Following Inspections Must Be Performed Prior To Government Inspection And Acceptance. 3.27.1 Material Sampling - Material Must Be Inspected For Form, Fit, And Function. Lot Acceptance Must Be Based On Zero Defects And Lot Rejection Based On One Defect. The Sample Size Must Be In Accordance With The Sampling Plan(s) In The Applicable Military specification Or Standard, Federal Specification Or Standard, Or Drawing To Which The Material Was Manufactured. In The Absence Of Such Sampling Plans, Sampling Inspection Must Be Per Ansi/asq-z1.4, General Inspection Level Ii (for Sample Size Selection Code), table Iia (for Sample Size). small Lot Sizes - For Lot Sizes Of Fifty Or Less, The Minimum Sample Size Must Be Eight Units. For Lot Sizes Of Eight Or Less, The Sample Size Must Be One Hundred Percent Of The Lot. 3.27.2 The Manufacturer May Elect To Use Statistical Process Control (spc) To Assure Product Quality In Lieu Of The Above Attribute Sampling Plan, Provided That The Spc Methodology/system Used Provides Acceptable Products To The Government. However, The government/navy Receipt Inspection Activity May Perform Their Acceptance Inspection Of The Material Using The Attribute Sampling Plan Outlined Above. 3.27.3 All Data Concerning Material Verification (chemical, Mechanical Or Physical Properties), Traceability (material Certifications To Material Marking), And Nondestructive Test (ndt) Certifications For Material Must Be 100% Inspected. The Certification test Reports Must Also Be 100% Inspected For Completeness And Legibility. 3.27.4 All Material Requiring Traceability Must Be 100% Inspected For Traceability Marking And That The Marking Is Legible. 3.28 Welding Requirements - When Production Or Repair Welding Is Required, The Applicable Welding Procedure(s) And Qualification Data Must Be Submitted For Review And Approval. In Addition, The Consumed Weld Metal C Of C As Defined Below Must Be Submitted As part Of The Certification Oqe Package Submitted By The Contractor. note: These Requirements Do Not Apply To Tack/spot Welds. 3.28.1 Approval Of The Contractor's Qualification Data Must Be Obtained Prior To Performing Any Welding (production Or Repair). 3.28.2 If The Contractors Qualification Data Has Previously Been Approved By The Navy For Other Contracts, A Copy Of The Original Approval Letter May Be Submitted Along With The Procedures And Qualification Data Report To Expedite The Approval Process. The approval Letter Must Reference The Applicable Welding Procedure And Qualification Data Report Identification/number. Prior Approval Does Not Guarantee Acceptance For This Or Any Future Contracts. As Far As Practical, All Procedures For The Contract Must Be submitted At The Same Time. Welding Procedures And Qualification Data Must Be Submitted In A Commercially Available Electronic Format Such As Adobe Acrobat Pdf. The Contractor Must State The Applicability Of Each Weld Procedure And Qualification Data Submitted, citing The Drawing Number And Pieces To Be Welded. (i.e. ''wp-123 And Qd-123 Are Submitted For The Weld Joint Between Pieces 1 And 2 On Drawing Abc'.' Wp-456 And Qd-456 Are Submitted For The Hardfacing Of Piece 3 On Drawing Xyz'') 3.28.3 The Pco's Authorization For The Use Of Weld Procedure(s) And Qualification Data For The Specific Application As Submitted Does Not Mitigate The Vendors Responsibility To Comply With The Requirements Of S9074-aq-gib-010, S9074-ar-gib-010a/278,248d The contract. 3.28.4 Authority For The Repair Of Special Repairs In Castings, The Repair Of Wrought Material, Or The Repair Of Forged Material Must Be Obtained Via Request For Waiver From The Procurement Contracting Officer. This Request Must Describe The Defect; Including size, Depth, Location, And A Description Of The Proposed Repair. Repairs Deemed Minor Or Nominal In Accordance With S9074-ar-gib-010/278 Can Be Made At Contractor Discretion In Accordance With S9074-ar-gib-010/278 Requirements; However, Weld Procedure specification (wps) And Procedure Qualification Record (pqr) Submittals Are Still Required. This Request For Navsup-wss Contracts Must Be Submitted Via The Electronic Contractor Data Submission (ecds) Application. 3.28.5 Any New Procedure Qualification Performed Under This Contract Will Require The Vendor To Provide A Minimum 72 Hour Notification To Dcma With An Offer To Observe The Welding Of The Test Assemblies. The 72 Hour Time Limit May Be Modified Upon Mutual agreement Between The Vendor And Dcma. 3.28.6 When Drawings Require Hardfacing Surface Iron Or Nickel Content Not To Exceed 5%, The Contractor Must Verify Surface Iron Or Nickel Content By Performing Chemical Testing As Defined By The Applicable Drawing. The Chemical Test Results Must Be Submitted as Part Of The Qualification Data. 3.28.7 Additional Qualification Requirements For Production Hardfacing Thickness Less Than 1/8-inch: Macro-etch (or Legible Photomacrographs Clearly Showing The Fusion Area) Must Be Submitted For Review And Show Consistent, Minimized Dilution. All Essential elements And Any Elements Not Listed In S9074-aq-gib-010/248 That Influence Dilution Must Be In The Qualification Data And Weld Procedure, With Strict Limits Placed On Each Essential Element. 3.28.8 Preparation And Retention Of Weld Records Is Required, As Specified By Paragraph 4.1.3 Of S9074-ar-gib-010a/278. 3.28.9 When Production Or Repair Welding Is Required On Titanium Materials, Theapplicable Fabrication Plan, Facilities Procedure, Training Plan, And Active Welder Qualification Must Also Be Submitted For Review And Approval. 3.28.10 If The Contractor's Fabrication Plan, Facilities Procedure, Training Plan, Or Active Welder Qualification Has Previously Been Approved By The Navy For Other Contracts, A Copy Of The Original Approval Letter May Be Submitted Along With The Applicable documentation To Expedite The Approval Process. The Approval Letter Must Reference The Applicable Documentation. Prior Approval Does Not Guarantee Acceptance For This Or Any Future Contracts. The Contractor's Fabrication Plan, Facilities Procedure, Training plan, And Active Welder Qualification Must Be Submitted At The Same Time As The Applicable Welding Procedure(s) And Weld Procedure Qualification Data. All Documentation Must Be Submitted In A Commercially Available Electronic Format, Such As Adobe Acrobat Pdf. 3.28.11 A Certificate Of Compliance Is Required For All Weld Filler Metals Used For Production Or Repair Welding, And Must Include The Following: a) Filler Metal Lot Number(s) b) Specification And Type c) A Positive Statement That The Vendor Has Obtained Oqe And Verified That Each Lot Of Weld Filler Material Conforms To Specification Requirements. d) A Positive Statement Verifying That The Weld Filler Metals Were The Correct Material Type Or Grade Prior To Consumption. 3.28.12 When Production Welds Or Repair Welds Are Performed By A Subcontractor, The Requirement For Submission Of All Certification Documentation Required Herein Must Be Passed Down To The Subcontractor. 3.29 See Cdrl Di-misc-80678 (special Emphasis C Of C) - The Certificate Of Compliance Must Show Traceability To The Marking Applied On Each Individual Item, And Must Contain The Following Information: 1. Contractor's Name, Address And Date. 2. The Contract/purchase Order Number (for Example: N00104-11-p-fa12) 3. The National Stock Number (nsn). The 18 Character National Stock Number For Special Emphasis Material Includes The Two Digit Cog, The Four Digit Fsc, The 9 Digit Niin, And The Two Digit Smic (for Example: 1h 4820 012345678 L1) ("n/a" When Not Applicable). 4. Lubricants, Sealants, Anti-seize, And/or Thread Locking Compounds ("n/a" When Not Applicable). 5. Certification That O-rings, Packing, Gaskets, Or Other Elastomeric Products Were Installed In A Compressed State Within An Assembly Or Sub-assembly, Prior To Expiration Of The Shelf Life ("n/a" When Not Applicable). 6. Manufacturer's Compound Number ("n/a" When Not Applicable). 7. When Weld Procedure Submittal Is Required By The Contract, A Statement That The Approval Date Of The Qualification Data Precedes Any Production Or Repair Welding Performed On This Contract. ("n/a" When Not Applicable). 8. A Statement To The Effect That All Items Furnished On This Contract Are In Full Compliance With The Specifications And Requirements And List Each Contractually Invoked Conformance/compliance Test Performed By Name And That It Was Performed satisfactorily. 9. Contractor's Or Authorized Personnel's Signature. 4. Quality Assurance 4.1 Notes To Dcma Qar And The Contractor - 4.1.1 Dcma Qar And The Contractor For Proprietary Designs - Departures From Contractor Imposed Requirements, Not Specifically Covered By The Contract, Must Be Judged Individually On The Basis Of The Effect, If Any, On Contractual Requirements. When There Is A disagreement Between The Contractor And The Government Representative As To The Effect On Contractual Requirements, The Departure Must Be Considered A Nonconformance And Be Submitted To The Pco For Disposition. 4.1.2 Dcma Qar And The Contractor For Proprietary Designs - All Records Of Departures From Contractor Imposed Requirements Must Be Maintained And Available For Review At The Contractor's Facility. A Copy Must Be Given To The Local Government Representative. A record Of These Departures, Traceable To The Applicablepart Number And Contract Number Must Be Submitted To The Pco. 4.1.3 Dcma Qar And The Contractor For Proprietary Designs - For Proprietary Designs, The Contractor's Part Numbers Are Acceptable For Reference Only. The Delivered Material Must Conform To All Drawings, Specifications, And Other Contractual Requirements. 4.1.4 Dcma Qar - It Is The Responsibility Of Dcma Qar To Review Non-destructive Testing (ndt) Procedures For Navsup Contracts/purchase Orders. 4.1.5 Dcma Qar And The Contractor - The Ecds (electronic Contractor Data Submission) System Is Available For Certain Data Submissions And To Submit Questions And Clarifications, And Waiver Requests On Contracts And Solicitations. Ecds Can Be Found At: https://register.nslc.navy.mil/ 5. Packaging 5.1 Preservation, Packaging, Packing And Marking - Preservation, Packaging, Packing And Marking Must Be In Accordance With The Contract/purchase Order Schedule And As Specified Below. mil-std 2073 Packaging Applies As Found Elsewhere In The Schedule 6. Notes 6.1 Several Definitions Of Terms That Apply To Csi Items Are Listed Below. All Terms May Not Apply To Every Item. 6.1.1 The Ecds (electronic Contractor Data Submission) System Is At: Https://register.nslc.navy.mil/ This Application Will Require Advance Registration Using A Pki Digital Certificate On A Cac. A Vendor User Guide Is Available As Csd001 In The Csd (contract Support Document) Library Within Ecds. 6.1.2 Critical Safety Item (csi) - Any Ship Part, Assembly, Or Support Equipment Containing A Critical Characteristic Whose Failure, Malfunction, Or Absence Of Which Could Cause A Catastrophic Or Critical Failure Resulting In Loss Of, Or Serious Damage To The ship, Or Unacceptable Risk Of Personal Injury Or Loss Of Life. 6.1.3 Critical Process - As Determined By The Twh, Any Process, Operation Or Action Performed On A Ship Csi That Serves To Establish A Critical Characteristic (such As Welding, Soldering, Machining, Polishing, Cleaning, Or Assembling) Or Confirm That A critical Characteristic Is Within Drawing Or Specification Compliance (such As, Testing, Measurement, Or Non-destructive Evaluation). 6.1.4 First Article - Pre-production Models, Initial Product Samples, Test Samples Produced To Ensure A Manufacturer's Capability To Meet Full Specification Requirements. 6.1.5 First Article Test (fat) - Contractually Required Testing And Inspection Of A Supplier's Pre-production, Production, Or "production Representative" Specimens To Evaluate A Manufacturer's Ability To Produce Conforming Product Prior To The Government's commitment To Receive Subsequent Production Items. First Article Testing Is Product Specific And Does Not Assess Manufacturing Process Controls Nor Does It Assure The Effectiveness Of The Manufacturer's Quality Program. 6.1.6 Government Source Inspection (gsi) - Gsi Is Independent Oversight Performed By A Government Representative Usually A Dcma Quality Assurance Representative (qar)) To Assure That Those Unique Product Quality And System Elements, Identified By The contracting Agency As Important, Are Observed And Evaluated. 6.1.7 Quality Assurance Letter Of Instruction (qali) - A Qali Is A Formal Document Initiated By A Contracting Activity That Provides Essential Requirements And Instructions For Contracted Materials To Be Independently Verified And Accepted By A Government representative Prior To Shipment. 6.1.8 Objective Quality Evidence (oqe) - The Quantitative And Qualitative Data Of All Mechanical, Chemical, And Performance Tests Performed (as Required By The Applicable Specification, Drawing, Or Purchase Document) To Prove That The Material Supplied conforms To The Specified Requirements. 6.1.9 Surface Discontinuity - Any Surface Irregularity, Marking, Or Localized Change In Physical Character Of The Surface, Other Than Dimensional, That Exists Infrequently At One Or Several Places. (examples: Burrs, Dents, Nicks, Scratches, Gouges, Pits, center-punches, Scribes, And Tool Marks) Surface Discontinuities Less Than 0.005-inch In Depth Are Acceptable Provided They Do Not Violate Any Other Design Requirements Specified In This Contract/purchase Order. 6.1.10 Traceability Code - A Code Or Number Providing Traceability To The Actual Chemical And Mechanical Properties Of The Specified Heat, Batch, Or Form From Which The Material Originated. 6.1.11 Verification - An Examination Performed To Determine Compliance With A Specific Requirement. 6.1.12 Nonconformance - A Nonconformance Is Defined As Affecting Or Violating The Following: - The Requirements Of This Contract/purchase Order. - Contractually Invoked Drawings (i.e. Envelope Dimensions, Interface Dimensions With Mating Parts/equipment, Center Of Gravity, Weights, Piece Part Identification, Material, Etc.). - Contractually Invoked Federal, Military, Or Commercial Specifications And/or Standards. - Form, Fit, Function, Performance To Contract Requirements, Reliability, Maintainability, Interchangeability, Safety Of Personnel Or Equipment, Or Additional Cost To The Government. 6.1.13 Waiver - A Written Authorization To Accept An Item, Which During Manufacture, Or After Having Been Submitted For Government Inspection Or Acceptance, Is Found To Depart From Specified Requirements, But Nevertheless Is Considered Suitable For Use As Is or After Repair By An Approved Method. 6.1.14 Deviation - A Specific Written Authorization (granted Prior To The Manufacture Of An Item) To Depart From A Particular Requirement(s) Of An Item's Current Approved Configuration Documentation For A Specific Number Of Units Or A Specified Period Of time, And To Accept An Item Which Is Found To Depart From Specified Requirements, But Nevertheless Is Considered Suitable For Use "as Is" Or After Repair By An Approved Method. 6.1.15 Critical Waiver/deviation - This Waiver/deviation Consists Of A Departure Involving Safety. 6.1.16 Major Waiver/deviation - This Waiver/deviation Consists Of A Departure Involving: - Performance - Interchangeability, Reliability, Survivability, Maintainability, Or Durability Of The Item Or Its Repair Parts - Health Or Safety - Effective Use Or Operation - Weight, Stability, Or Structural Integrity - System Design Parameters As Schematics, Flows, Pressures Or Temperatures - Compartment Arrangements Or Assigned Function 6.1.17 Minor Waiver/deviation - This Waiver/deviation Consists Of A Departure Which Does Not Involve Any Of The Factors Listed As Critical Or Major. 6.1.18 Engineering Change (ec) - A Change To The Current Approved Configuration Documentation Of A Configuration Item At Any Point In The Life Cycle Of The Item. 6.1.19 Engineering Change Proposal (ecp) - A Proposed Engineering Change And The Documentation By Which The Change Is Described, Justified, And Submitted To The Government For Approval Or Disapproval. 6.1.20 Class I Ecp - A Class I Ecp Is Approved By The Government's Configuration Control Board And Authorized With A Contract Modification. 6.1.21 Class Ii Ecp - A Class Ii Change Is Typically Reviewed For Concurrence In Classification By The Local Government Representative, Unless Otherwise Specified Elsewhere In The Contract/purchase Order. 6.2 In Accordance With Opnavinst 5510.1 All Documents And Drawings Provided By The U.s. Navy To Perspective Contractors Must Include A "distribution Statement" To Inform The Contractor Of The Limits Of Distribution, And The Safeguarding Of The Information contained On Those Documents And Drawings. 6.2.1 There Are 7 (seven) Separate Distribution Statement Codes Used For Non-classified Documents And Drawings. The Definition For Each Is As Follows: a... Approved For Public Release; Distribution Is Unlimited. b... Distribution Authorized To Us Governments Agencies Only. c... Distribution Authorized To Us Government Agencies And Their Contractors. d... Distribution Authorized To Dod And Dod Contractors Only. e... Distribution Authorized To Dod Components Only. f... Further Distribution Only As Directed By Commander, Naval Sea Systems Command, Code 09t. x... Distribution Is Authorized To Us Government Agencies And Private Individuals Or Enterprises Eligible To Obtain Export Controlled Technical Data In Accordance With Opnavinst 5510.161. 6.3 Ordering Information For Document References - The Department Of Defense Single Stock Point (dodssp), Website Http://www.dsp.dla.mil/, Provides Product Information For The Department Of Defense Index Of Specifications And Standards (dodiss) (i.e.military/federal Specifications And Standards), Data Item Descriptions (dids), And Other Dodssp Products. Most Specifications Can Obtained Directly From Http://quicksearch.dla.mil/ a. Availability Of Cancelled Documents - The Dodssp Offers Cancelled Documentsthat Are Required By Private Industry In Fulfillment Of Contractual Obligationsin Paper Format. Documents Can Be Requested By Phoning The Subscription Services Desk. b. Commercial Specifications, Standards, And Descriptions - These Specifications, Standards And Descriptions Are Not Available From Government Sources. Theymay Be Obtained From The Publishers Of The Applicable Societies. c. Ordnance Standards (os), Weapons Specifications (ws), And Navord Ostd 600 Pages - These Type Publications May Be Obtained By Submitting A Request To: commander, Indian Head Division, Naval Surface Warfare Center code 8410p, 101 Strauss Avenue indian Head, Md 20640-5035 d. On Post-award Actions, Requests For "official Use Only" And "noforn" (not Releasable To Foreign Nationals) Documents Must Identify The Government Contractnumber, And Must Be Submitted Via The Cognizant Defense Contract Management Command (dcmc) For certification Of Need For The Document. On Pre-award Actions Such Requests Must Be Submitted To The Pco For Certification Of Need For The Document. e. Noforn Military Specifications And Standards (including Amendments, Change Notices And Supplements, But Not Interim Changes) To Be Ordered From: contracting Officer navsup-wss code 87321 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 f. Nuclear Reactor Publications Assigned Navsea Documents And Identification Numbers (i.e. Navsea Welding Standard, Navsea 250-1500-1) Are To Be Ordered Enue: commanding Officer navsup-wss code 009 5450 Carlisle Pike p.o. Box 2020 mechanicsburg, Pa. 17055-0788 g. Technical Manuals Assigned Navsea Identification Numbers (i.e. Navsea Welding And Brazing Procedure, Navsea S9074-aq-gib-010/248) Are To Be Ordered From: commanding Officer navsup-wss code 1 Support Branch 700 Robbins Avenue philadelphia, Pa. 19111-5094 h. Interim Changes And Classified Specifications Must Be Obtained By Submitting A Request On Dd Form 1425 To Navsup-wss. 6.4 Recent Updates - A Short Description Of Recent Updates To The Technical Requirements Of This Item Are Listed Below, Along With An Implementation Date For Each Issue. The Notes Below Are Only A Generic Quick Reference And Are Provided For Convenience only, Detailed Requirements Will Be Defined Elsewhere In The Technical Sections Of This Contract/purchase Order. ;- Oct 20 2016 - Updated Ecds Url - Feb 26 2009 - Clarified Testing And Certs Only Apply To Pieces Listed - Oct 29 2010 - Added Sampling Std For Li In-process Testing - Sep 30 2008 - Thread Inspection Requirements Were Clarified - Dec 17 2011 - Began Using Ecds For Submissions - Jan 05 2012 - Added Wawf To Forward Approved Waivers/deviations With Final Oqe - Dec 17 2011 - Moved Quality Assurance Text Location For Readability - Apr 15 2009 - Clarified The Sample Size For Large And Small Lot Sizes - Jan 19 2011 - Added Notification Of Dcma Upon Contract Award - May 02 2009 - Added Lubricants And Sealants To The C Of C - Aug 27 2014 - Took Out Contractor's Phone Number Requirement - Dec 01 2011 - Moved "notes To Dcma Qar" To Qa Section - Jan 5 2017 - Ecds/csd Info Was Added To Definitions In The Notes Section; date Of First Submission=asreq paragraph 10.4 Of Di-qcic-81110 Does Not Apply. date Of First Submission=asreq block 12 - Certification Data Must Be Submitted To Portsmouth Naval Shipyard For Review And Acceptance Prior To Each Shipment Of Material. Certification Documentation Must Be Submitted Via Wawf (wide Area Work Flow). enter In Wawf As Follows: "ship To" N50286 "inspect By" N39040 "accept By" N39040 and Email Notification Field: Port_ptnh_wa

Details: 1. Zamiot's speech is: 1) Dostawa: Dostawa: A) Subscription of Tj.; Adobe Cc For Teams Lub Oprogramowanie oraz Rozfejsów Użytkownik Tj. B) A software for the Tj: Testflo Lub Oprogramowanie Przebiegu Procesu Testu Testu Testu Testu of the Progressive Work of W Tests of Tj.: Testflo Lub Oprogramowanie Eprogramowanie W Celu Rozszenianość Wu Rozszenia Wu Rozszelenie dla Zamawiaowanie Oprogramowanie Oprogramowanie Narzędziowego Jira W Numberie 1. "Oraz" Oraz" (in Polish). 2) 2) Lub Zapewnienienienienie przez Wykonawka Lub Producer Oprogramowanie W Zakresie W Zakresie Wsparcia dla Oprogramowanie przez Period Wskazany Wkt 1.3 Sopz, According to Zciełącznik Nr 5 Dowz-wzoru Umowy, Zwanego Dalum Wkt 1.3 Sopz, Wkt 1.3 Sopz. 2. Szczegółowy Opis premiotu Za orderenia (dal Sopz) Zawarty jest W Załączniku Nr 1 Do Swz.

Details: (i) This Is A Combined Synopsis/solicitation For Commercial Items Prepared In Accordance With The Format In Subpart 12.6 Of The Federal Acquisition Regulation, As Supplemented With Additional Information Included In This Notice. This Announcement Constitutes The Only Solicitation; Proposals Are Being Requested And A Written Solicitation Will Not Be Issued. (ii) This Solicitation Is Issued As An Request For Quotation (rfq). (iii) The Solicitation Document And Incorporated Provisions And Clauses Are Those In Effect Through Federal Acquisition Circular 2023-05. (iv) This Procurement Is Set Aside For Total Small Business. The Naics Code Is 561990 And The Small Business Size Standard Is $16.5 Million. (v) Schedule Of Items/price Schedule See Attachment 05 Schedule Of Items (vi) Description Of Requirement (including A List Of Any Attachments) the Contractor Shall Furnish All Labor, Equipment, Supplies, Incidentals, Insurance, And Transportation Necessary To Perform Trail Grooming Of Snowmobile Trails On The Calaveras Ranger District Of The Stanislaus National Forest. The Trails Are To Be Groomed To Maintain A Smooth Surface Where An Average Snowmobile User Could Travel At A Maximum Safe Speed Of And 35 Mph On Hwy 4 And Spicer Road (forest Road 7n01). See Performance Work Statement For Additional Requirements. list Of Attachments: attachment 01 Performance Work Statement attachment 02 Snow Grooming Monitoring Map attachment 03 Wage Determination attachment 04 Calaveras Rd Snow Grooming Questionnaire attachment 05 Schedule Of Items (vii) Date(s) And Place(s) Of Delivery And Acceptance/location the California State Highway 4 Winter Parking/ Snowmobile Staging/trailhead Area (lake Alpine Sno-park And Spicer Road Sno-park) Located In The Calaveras Ranger Station Of The Stanislaus National Forest. a) The Trails To Be Groomed Consist Of The Following: bear Valley Trail, Approximately 2 Miles, From Bear Valley, Across State Highway 4, To The Silvertip Campground And Lake Alpine Sno Park. highway 4, Approximately 10 Miles, From The Silvertip Campground Unloading Area At The Lake Alpine Sno-park, Around The Road Closure Gate, East On Highway 4 And 1 Mile Down Into The Stanislaus Meadow And Back Up To Highway 4, Continuing East On Highway 4 Past Mosquito Lakes, Into Pacific valley To Hermit Valley And T The Dear Valley Ohv Trail Head. This Is Considered This A ½ Groom. highway 4, Approximately 5 Miles, From The Dear Valley Ohv Trail Head 8n02, East On Highway 4 To The Highland Lakes Road 8n01 Junction, Then 1.5 Miles To Top Of Ebbetts Pass And Back To Highland Lakes Road Junction, Then South On Highland Lakes Road, And 5 Miles To Highland Lakes. This Is Considered A Full Groom. spicer Reservoir Road 7n01, Approximately 13.5 Miles, From Highway 4 To Spicer Reservoir Powerhouse, Union Reservoir Road 7n75 And Utica Reservoir Roads 7n17 And To The Entrance Of Slick Rock Road 7n17. (viii) 52.212-1 Instructions To Offerors – Commercial Products And Commercial Services (sep 2023) (provision) addenda To Provision 52.212-1: addenda To Provision 52.212-1: for Simplified Acquisitions, The Word Quote Or Quoter Is Substituted In Provision 52.212-1 For The Word Offer Or Offeror. addenda To Provision 52.212-1 Paragraph (b) Submission Of Offers: 1) Offerors Must Have An Active Entity Registration In The System For Award Management In Order To Submit An Offer. Https://www.sam.gov/sam/ 2) Offers Submitted In Response To This Solicitation Shall Include A Technical Proposal, A Price Proposal, And Contractor Representations And Certifications. A) Technical Proposal – The Technical Proposal Shall Address The Evaluation Factors In 52.212-2. At A Minimum Technical Proposal Shall Include: Completed Questionnaire, Equipment Description, Back-up Plan, Emergency Plan. I) Past Performance – Provide A List Of Similar Projects Completed By Your Firm Over The Past Three Years. Include A Brief Description Of The Project, Dollar Amount, Year Completed, And Project Owner Contact Information (name, Phone, And Email). The Government May Use Past Performance Information From Any Available Source. If A Company Does Not Have Past Performance Information Available, Information May Be Provided For Predecessor Companies, Key Personnel, Or Subcontractors. In The Event That There Is No Past Performance Information Available, The Offeror Will Receive A Neutral Rating In This Factor. Ii) Technical Capability – Provide A List Of Equipment And Key Personnel (with Qualifications) That Will Be Used To Complete This Project. B) Price Proposal – Include The Following: 1) The Completed Schedule Of Items From List Of Attachments, Attachment 05 Of This Solicitation, And 2) Acknowledgement Of Any Amendments To This Solicitation By Following The Instructions That Accompany The Amendment(s). C) Representations And Certifications – Fill In The Check Boxes For Provisions 52.204-24, 52.209-7, 52.212-3, And Employment Of Eligible Workers-workforce Certification Found In Paragraph X Of This Solicitation And Include A Copy With Your Offer. 3) Submit Offer By Email To Robert.briney@usda.gov So That It Is Delivered Into This Inbox By The Due Date And Time. Emails Should Contain 3 Separate Attachments (technical Proposal, Price Proposal, And Representations And Certifications) In Microsoft Word, Excel, Or Adobe Pdf Format. Be Aware That Large Attachments May Increase The Time Required To Deliver An Email. It Is The Offerors Responsibility To Confirm Receipt Of The Offer From Robert Briney, At Robert.briney@usda.gov. 4) Address Questions About This Solicitation To Robert Briney At Robert.briney@usda.gov. addenda To Provision 52.212-1 Paragraph (f) Late Submissions: replace (f)(2)(i) With The Following: any Offer, Modification, Revision, Or Withdrawal Of An Offer Received At The Government Office Designated In The Solicitation After The Exact Time Specified For Receipt Of Offers Is "late" And Will Not Be Considered Unless It Is Received Before Award Is Made And The Contracting Officer Determines That Accepting The Late Offer Would Not Unduly Delay The Acquisition. Delete 52.212-1 (f)(2)(i) Paragraphs A, B, & C. (ix) 52.212-2 Evaluation – Commercial Products And Commercial Services (nov 2021) (provision) (a) The Government Will Award A Contract Resulting From This Solicitation To The Responsible Offeror Whose Offer Conforming To The Solicitation Will Be Most Advantageous To The Government, Price And Other Factors Considered. The Following Factors Shall Be Used To Evaluate Offers: _price, Technical, And Past Performance _______________________________________ technical And Past Performance, When Combined, Are Equal To Price. (b) Options. The Government Will Evaluate Offers For Award Purposes By Adding The Total Price For All Options To The Total Price For The Basic Requirement. The Government May Determine That An Offer Is Unacceptable If The Option Prices Are Significantly Unbalanced. Evaluation Of Options Shall Not Obligate The Government To Exercise The Option(s). (c) A Written Notice Of Award Or Acceptance Of An Offer, Mailed Or Otherwise Furnished To The Successful Offeror Within The Time For Acceptance Specified In The Offer, Shall Result In A Binding Contract Without Further Action By Either Party. Before The Offer’s Specified Expiration Time, The Government May Accept An Offer (or Part Of An Offer), Whether Or Not There Are Negotiations After Its Receipt, Unless A Written Notice Of Withdrawal Is Received Before Award. (x) Representations And Certifications (complete Highlighted Items In This Section And Return With Your Offer) vendor Name: _____________________________________________ vendor Uei: _____________________________________________ 52.204-24 Representation Regarding Certain Telecommunications And Video Surveillance Services Or Equipment (nov 2021) (provision) the Offeror Shall Not Complete The Representation At Paragraph (d)(1) Of This Provision If The Offeror Has Represented That It "does Not Provide Covered Telecommunications Equipment Or Services As A Part Of Its Offered Products Or Services To The Government In The Performance Of Any Contract, Subcontract, Or Other Contractual Instrument" In Paragraph (c)(1) In The Provision At 52.204-26, Covered Telecommunications Equipment Or Services—representation, Or In Paragraph (v)(2)(i) Of The Provision At 52.212-3, Offeror Representations And Certifications-commercial Products Or Commercial Services. The Offeror Shall Not Complete The Representation In Paragraph (d)(2) Of This Provision If The Offeror Has Represented That It "does Not Use Covered Telecommunications Equipment Or Services, Or Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services" In Paragraph (c)(2) Of The Provision At 52.204-26, Or In Paragraph (v)(2)(ii) Of The Provision At 52.212-3. (a) Definitions. As Used In This Provision— Backhaul, Covered Telecommunications Equipment Or Services, Critical Technology, Interconnection Arrangements, Reasonable Inquiry, Roaming, And Substantial Or Essential Component Have The Meanings Provided In The Clause 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (b) Prohibition. (1) Section 889(a)(1)(a) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of An Executive Agency On Or After August 13, 2019, From Procuring Or Obtaining, Or Extending Or Renewing A Contract To Procure Or Obtain, Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. Nothing In The Prohibition Shall Be Construed To— (i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (2) Section 889(a)(1)(b) Of The John S. Mccain National Defense Authorization Act For Fiscal Year 2019 (pub. L. 115-232) Prohibits The Head Of An Executive Agency On Or After August 13, 2020, From Entering Into A Contract Or Extending Or Renewing A Contract With An Entity That Uses Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services As A Substantial Or Essential Component Of Any System, Or As Critical Technology As Part Of Any System. This Prohibition Applies To The Use Of Covered Telecommunications Equipment Or Services, Regardless Of Whether That Use Is In Performance Of Work Under A Federal Contract. Nothing In The Prohibition Shall Be Construed To— (i) Prohibit The Head Of An Executive Agency From Procuring With An Entity To Provide A Service That Connects To The Facilities Of A Third-party, Such As Backhaul, Roaming, Or Interconnection Arrangements; Or (ii) Cover Telecommunications Equipment That Cannot Route Or Redirect User Data Traffic Or Cannot Permit Visibility Into Any User Data Or Packets That Such Equipment Transmits Or Otherwise Handles. (c) Procedures. The Offeror Shall Review The List Of Excluded Parties In The System For Award Management (sam) (https://www.sam.gov) For Entities Excluded From Receiving Federal Awards For "covered Telecommunications Equipment Or Services". (d) Representation. The Offeror Represents That— (1) It ☐ Will, ☐ Will Not Provide Covered Telecommunications Equipment Or Services To The Government In The Performance Of Any Contract, Subcontract Or Other Contractual Instrument Resulting From This Solicitation. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(1) Of This Section If The Offeror Responds "will" In Paragraph (d)(1) Of This Section; And (2) After Conducting A Reasonable Inquiry, For Purposes Of This Representation, The Offeror Represents That— It ☐ Does, ☐ Does Not Use Covered Telecommunications Equipment Or Services, Or Use Any Equipment, System, Or Service That Uses Covered Telecommunications Equipment Or Services. The Offeror Shall Provide The Additional Disclosure Information Required At Paragraph (e)(2) Of This Section If The Offeror Responds "does" In Paragraph (d)(2) Of This Section. (e) Disclosures. (1) Disclosure For The Representation In Paragraph (d)(1) Of This Provision. If The Offeror Has Responded "will" In The Representation In Paragraph (d)(1) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer: (i) For Covered Equipment— (a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Original Equipment Manufacturer (oem) Or A Distributor, If Known); (b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And (c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision. (ii) For Covered Services— (a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or (b) If Not Associated With Maintenance, The Product Service Code (psc) Of The Service Being Provided; And Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(1) Of This Provision. (2) Disclosure For The Representation In Paragraph (d)(2) Of This Provision. If The Offeror Has Responded "does" In The Representation In Paragraph (d)(2) Of This Provision, The Offeror Shall Provide The Following Information As Part Of The Offer: (i) For Covered Equipment— (a) The Entity That Produced The Covered Telecommunications Equipment (include Entity Name, Unique Entity Identifier, Cage Code, And Whether The Entity Was The Oem Or A Distributor, If Known); (b) A Description Of All Covered Telecommunications Equipment Offered (include Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); And (c) Explanation Of The Proposed Use Of Covered Telecommunications Equipment And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision. (ii) For Covered Services— (a) If The Service Is Related To Item Maintenance: A Description Of All Covered Telecommunications Services Offered (include On The Item Being Maintained: Brand; Model Number, Such As Oem Number, Manufacturer Part Number, Or Wholesaler Number; And Item Description, As Applicable); Or (b) If Not Associated With Maintenance, The Psc Of The Service Being Provided; And Explanation Of The Proposed Use Of Covered Telecommunications Services And Any Factors Relevant To Determining If Such Use Would Be Permissible Under The Prohibition In Paragraph (b)(2) Of This Provision. 52.212-3 Offeror Representations And Certifications – Commercial Products And Commercial Services (sep 2023) (deviation Nov 2022) (provision) [if Offeror Representations And Certifications Are Not Complete In Sam The Offeror Shall Submit A Completed Copy Of The Provision At 52.212-3, Offeror Representations And Certifications-commercial Products And Commercial Services, With Your Offer. The Full Provision Is Available From Http://www.acquisition.gov/far/. if Offeror Representations And Certifications Are Complete In Sam, The Offeror Shall Complete The Following:] (b)(1) Annual Representations And Certifications. Any Changes Provided By The Offeror In Paragraph (b)(2) Of This Provision Do Not Automatically Change The Representations And Certifications In Sam. (2) The Offeror Has Completed The Annual Representations And Certifications Electronically In Sam Accessed Through Http://www.sam.gov. After Reviewing Sam Information, The Offeror Verifies By Submission Of This Offer That The Representations And Certifications Currently Posted Electronically At Far 52.212-3, Offeror Representations And Certifications-commercial Products And Commercial Services, Have Been Entered Or Updated In The Last 12 Months, Are Current, Accurate, Complete, And Applicable To This Solicitation (including The Business Size Standard(s) Applicable To The Naics Code(s) Referenced For This Solicitation), At The Time This Offer Is Submitted And Are Incorporated In This Offer By Reference (see Far 4.1201), Except For Paragraphs ______________. [offeror To Identify The Applicable Paragraphs At (c) Through (v) Of This Provision That The Offeror Has Completed For The Purposes Of This Solicitation Only, If Any. Write “none” If There Are No Changes Needed To Your Online Reps And Certs. (xi) 52.212-4 Contract Terms And Conditions – Commercial Products And Commercial Services (dec 2022) (deviation 2017-1) (xii) 52.212-5 Contract Terms And Conditions Required To Implement Statutes Or Executive Orders– Commercial Products And Commercial Services (sep 2023) (deviation 2017-1) (a) The Contractor Shall Comply With The Following Federal Acquisition Regulation (far) Clauses, Which Are Incorporated In This Contract By Reference, To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Products And Commercial Services: (1) 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (2) 52.204-23, Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kaspersky Lab And Other Covered Entities (nov 2021) (section 1634 Of Pub. L. 115-91). (3) 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (nov 2021) (section 889(a)(1)(a) Of Pub. L. 115-232). (4) 52.209-10, Prohibition On Contracting With Inverted Domestic Corporations (nov 2015) (5) 52.232-40, Providing Accelerated Payments To Small Business Subcontractors (mar 2023) (31 U.s.c.3903 And 10 U.s.c. 3801) (6) 52.233-3, Protest After Award (aug 1996) (31 U.s.c. 3553). (7) 52.233-4, Applicable Law For Breach Of Contract Claim (oct 2004) (public Laws 108-77 And 108-78 (19 U.s.c. 3805note)). (b) The Contractor Shall Comply With The Far Clauses In This Paragraph (b) That The Contracting Officer Has Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Products And Commercial Services: [contracting Officer Check As Appropriate.] ☒ (1) 52.203-6, Restrictions On Subcontractor Sales To The Government (june 2020), With Alternate I (nov 2021) (41 U.s.c. 4704 And 10 U.s.c. 4655). ☐ (2) 52.203-13, Contractor Code Of Business Ethics And Conduct (nov 2021) (41 U.s.c. 3509)). ☐ (3) 52.203-15, Whistleblower Protections Under The American Recovery And Reinvestment Act Of 2009 (jun 2010) (section 1553 Of Pub. L. 111-5). (applies To Contracts Funded By The American Recovery And Reinvestment Act Of 2009.) ☒ (4) 52.203-17, Contractor Employee Whistleblower Rights And Requirement To Inform Employees Of Whistleblower Rights (jun 2020) (deviation 2017-1) (whistleblower Guidance To Contractor Employees) ☒ (5) 52.204-10, Reporting Executive Compensation And First-tier Subcontract Awards (jun 2020) (pub. L. 109-282) (31 U.s.c. 6101 Note). ☐ (6) 52.204-14, Service Contract Reporting Requirements (oct 2016) (pub. L. 111-117, Section 743 Of Div. C). ☐ (7) 52.204-15, Service Contract Reporting Requirements For Indefinite-delivery Contracts (oct 2016) (pub. L. 111-117, Section 743 Of Div. C). ☒ (8) 52.204-27, Prohibition On A Bytedance Covered Application (jun 2023) (section 102 Of Division R Of Pub. L. 117-328). ☒ (9) 52.209-6, Protecting The Government’s Interest When Subcontracting With Contractors Debarred, Suspended, Or Proposed For Debarment. (nov 2021) (31 U.s.c. 6101note). ☐ (10) 52.209-9, Updates Of Publicly Available Information Regarding Responsibility Matters (oct 2018) (41 U.s.c. 2313). ☐ (11) [reserved]. ☐ (12) (i) 52.219-3, Notice Of Hubzone Set-aside Or Sole-source Award (oct 2022) (15 U.s.c.657a). ☐ (13) (i) 52.219-4, Notice Of Price Evaluation Preference For Hubzone Small Business Concerns (oct 2022) (if The Offeror Elects To Waive The Preference, It Shall So Indicate In Its Offer) (15 U.s.c. 657a). ☐ (14) [reserved] ☒ (15) (i) 52.219-6, Notice Of Total Small Business Set-aside (nov 2020) (15 U.s.c.644). ☐ (ii) Alternate I (mar 2020) Of 52.219-6. ☐ (16) (i) 52.219-7, Notice Of Partial Small Business Set-aside (nov 2020) (15 U.s.c. 644). ☐ (ii) Alternate I (mar 2020) Of 52.219-7. ☒ (17) 52.219-8, Utilization Of Small Business Concerns (sep 2023) (15 U.s.c. 637(d)(2) And (3)). ☐ (18) (i) 52.219-9, Small Business Subcontracting Plan (sep 2023) (15 U.s.c. 637(d)(4)). ☐ (ii) Alternate I (nov 2016) Of 52.219-9. ☐ (iii) Alternate Ii (nov 2016) Of 52.219-9. ☐ (iv) Alternate Iii (jun 2020) Of 52.219-9. ☐ (v) Alternate Iv (sep 2023) Of 52.219-9. ☐ (19) (i) 52.219-13, Notice Of Set-aside Of Orders (mar 2020) (15 U.s.c. 644(r)). ☐ (ii) Alternate I (mar 2020) Of 52.219-13 ☒ (20) 52.219-14, Limitations On Subcontracting (oct 2022) (15 U.s.c.637s) [contracting Officer Check As Appropriate.] ☐ By The End Of The Base Term Of The Contract And Then By The End Of Each Subsequent Option Period; Or ☐ By The End Of The Performance Period For Each Order Issued Under The Contract. ☐ (21) 52.219-16, Liquidated Damages-subcontracting Plan (sep 2021) (15 U.s.c. 637(d)(4)(f)(i)). ☐ (22) 52.219-27, Notice Of Service-disabled Veteran-owned Small Business Set-aside (oct 2022) (15 U.s.c. 657f). ☒ (23) (i) 52.219-28, Post Award Small Business Program Rerepresentation (sep 2023) (15 U.s.c. 632(a)(2)). ☐ (ii) Alternate I (mar 2020) Of 52.219-28. ☐ (24) 52.219-29, Notice Of Set-aside For, Or Sole Source Award To, Economically Disadvantaged Women-owned Small Business Concerns (oct 2022) (15 U.s.c. 637(m)). ☐ (25) 52.219-30, Notice Of Set-aside For, Or Sole Source Award To, Women-owned Small Business Concerns Eligible Under The Women-owned Small Business Program (oct 2022) (15 U.s.c. 637(m)). ☐ (26) 52.219-32, Orders Issued Directly Under Small Business Reserves (mar 2020) (15 U.s.c. 644(r)). ☐ (27) 52.219-33, Nonmanufacturer Rule (sep 2021) (15 U.s.c. 637(a)(17)). ☒ (28) 52.222-3, Convict Labor (jun 2003) (e.o.11755). ☐ (29) 52.222-19, Child Labor-cooperation With Authorities And Remedies (dec 2022) (e.o.13126). ☒ (30) 52.222-21, Prohibition Of Segregated Facilities (apr 2015). ☒ (31) (i) 52.222-26, Equal Opportunity (sep 2016) (e.o.11246). ☐ (ii) Alternate I (feb 1999) Of 52.222-26. ☒ (32) (i) 52.222-35, Equal Opportunity For Veterans (jun 2020) (38 U.s.c. 4212). ☐ (ii) Alternate I (jul 2014) Of 52.222-35. ☒ (33) (i) 52.222-36, Equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c.793). ☐ (ii) Alternate I (jul 2014) Of 52.222-36. ☒ (34) 52.222-37, Employment Reports On Veterans (jun 2020) (38 U.s.c. 4212). ☒ (35) 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act (dec 2010) (e.o. 13496). ☒ (36) (i) 52.222-50, Combating Trafficking In Persons (nov 2021) (22 U.s.c. Chapter 78 And E.o. 13627). ☐ (ii) Alternate I (mar 2015) Of 52.222-50 (22 U.s.c. Chapter78 And E.o. 13627). ☒ (37) 52.222-54, Employment Eligibility Verification (may 2022). (executive Order 12989). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items Or Certain Other Types Of Commercial Products Or Commercial Services As Prescribed In Far 22.1803.) ☐ (38) (i) 52.223-9, Estimate Of Percentage Of Recovered Material Content For Epa–designated Items (may 2008) (42 U.s.c. 6962(c)(3)(a)(ii)). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items.) ☐ (ii) Alternate I (may 2008) Of 52.223-9 (42 U.s.c. 6962(i)(2)(c)). (not Applicable To The Acquisition Of Commercially Available Off-the-shelf Items.) ☐ (39) 52.223-11, Ozone-depleting Substances And High Global Warming Potential Hydrofluorocarbons (jun 2016) (e.o. 13693). ☐ (40) 52.223-12, Maintenance, Service, Repair, Or Disposal Of Refrigeration Equipment And Air Conditioners (jun 2016) (e.o. 13693). ☐ (41) (i) 52.223-13, Acquisition Of Epeat®-registered Imaging Equipment (jun 2014) (e.o.s 13423 And 13514). ☐ (ii) Alternate I (oct 2015) Of 52.223-13. ☐ (42) (i) 52.223-14, Acquisition Of Epeat®-registered Televisions (jun 2014) (e.o.s 13423 And 13514). ☐ (ii) Alternate I (jun 2014) Of 52.223-14. ☐ (43) 52.223-15, Energy Efficiency In Energy-consuming Products (may 2020) (42 U.s.c. 8259b). ☐ (44) (i) 52.223-16, Acquisition Of Epeat®-registered Personal Computer Products (oct 2015) (e.o.s 13423 And 13514). ☐ (ii) Alternate I (jun 2014) Of 52.223-16. ☒ (45) 52.223-18, Encouraging Contractor Policies To Ban Text Messaging While Driving (jun 2020) (e.o. 13513). ☐ (46) 52.223-20, Aerosols (jun 2016) (e.o. 13693). ☐ (47) 52.223-21, Foams (jun 2016) (e.o. 13693). ☐ (48) (i) 52.224-3 Privacy Training (jan 2017) (5 U.s.c. 552 A). ☐ (ii) Alternate I (jan 2017) Of 52.224-3. ☐ (49)(i) 52.225-1, Buy American-supplies (oct 2022) (41 U.s.c. Chapter 83). ☐(ii) Alternate I (oct 2022) Of 52.225-1 ☐ (50) (i) 52.225-3, Buy American-free Trade Agreements-israeli Trade Act (dec 2022) (19 U.s.c. 3301 Note, 19 U.s.c. 2112 Note, 19 U.s.c. 3805 Note, 19 U.s.c. 4001 Note, 19 U.s.c. Chapter 29 (sections 4501-4732), Public Law. 103-182, 108-77, 108-78, 108-286, 108-302, 109-53, 109-169, 109-283, 110-138, 112-41, 112-42, And 112-43. ☐(ii) Alternate I [reserved] ☐(iii) Alternate Ii (dec 2022) Of 52.225-3. ☐(iv) Alternate Iii (jan 2021) Of 52.225-3. ☐(v) Alternate Iv (oct 2022) Of 52.225-3. ☐ (51) 52.225-5, Trade Agreements (dec 2022) (19 U.s.c. 2501, Et Seq., 19 U.s.c. 3301 Note). ☒ (52) 52.225-13, Restrictions On Certain Foreign Purchases (feb 2021) (e.o.’s, Proclamations, And Statutes Administered By The Office Of Foreign Assets Control Of The Department Of The Treasury). ☐ (53) 52.225-26, Contractors Performing Private Security Functions Outside The United States (oct 2016) (section 862, As Amended, Of The National Defense Authorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). ☐ (54) 52.226-4, Notice Of Disaster Or Emergency Area Set-aside (nov 2007) (42 U.s.c. 5150). ☐ (55) 52.226-5, Restrictions On Subcontracting Outside Disaster Or Emergency Area (nov 2007) (42 U.s.c. 5150). ☐ (56) 52.229-12, Tax On Certain Foreign Procurements (feb 2021). ☐ (57) 52.232-29, Terms For Financing Of Purchases Of Commercial Products And Commercial Services (nov 2021) (41 U.s.c.4505, 10 U.s.c.3805). ☐ (58) 52.232-30, Installment Payments For Commercial Products And Commercial Services (nov 2021) (41 U.s.c.4505, 10 U.s.c.3805). ☒ (59) 52.232-33, Payment By Electronic Funds Transfer-system For Award Management (oct 2018) (31 U.s.c. 3332). ☐ (60) 52.232-34, Payment By Electronic Funds Transfer-other Than System For Award Management (jul 2013) (31 U.s.c.3332). ☐ (61) 52.232-36, Payment By Third Party (may 2014) (31 U.s.c.3332). ☐ (62) 52.239-1, Privacy Or Security Safeguards (aug 1996) (5 U.s.c. 552a). ☐ (63) 52.242-5, Payments To Small Business Subcontractors (jan 2017) (15 U.s.c. 637(d)(13)). ☐ (64) (i) 52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels (nov 2021) (46 U.s.c. 55305 And 10 U.s.c. 2631). ☐ (ii) Alternate I (apr 2003) Of 52.247-64. ☐ (iii) Alternate Ii (nov 2021) Of 52.247-64. (c) The Contractor Shall Comply With The Far Clauses In This Paragraph (c), Applicable To Commercial Services, That The Contracting Officer Has Indicated As Being Incorporated In This Contract By Reference To Implement Provisions Of Law Or Executive Orders Applicable To Acquisitions Of Commercial Products And Commercial Services: contracting Officer Check As Appropriate.] ☒ (1) 52.222-41, Service Contract Labor Standards (aug 2018) (41 U.s.c. Chapter 67). ☒ (2) 52.222-42, Statement Of Equivalent Rates For Federal Hires (may 2014) (29 U.s.c. 206 And 41 U.s.c. Chapter 67). in Compliance With The Service Contract Labor Standards Statute And The Regulations Of The Secretary Of Labor (29 Cfr Part 4), This Clause Identifies The Classes Of Service Employees Expected To Be Employed Under The Contract And States The Wages And Fringe Benefits Payable To Each If They Were Employed By The Contracting Agency Subject To The Provisions Of 5 U.s.c.5341 Or 5 332. this Statement Is For Information Only: It Is Not A Wage Determination employee Class Monetary Wage/fringe Benefits heavy Equipment Operator Gs-7 $23.87 Per Hour ☒ (3) 52.222-43, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (multiple Year And Option Contracts) (aug 2018) (29 U.s.c. 206 And 41 U.s.c. Chapter 67). ☐ (4) 52.222-44, Fair Labor Standards Act And Service Contract Labor Standards-price Adjustment (may 2014) (29 U.s.c. 206 And 41 U.s.c. Chapter 67). ☐ (5) 52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may 2014) (41 U.s.c. Chapter 67). ☐ (6) 52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements (may 2014) (41 U.s.c. Chapter 67). ☒ (7) 52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026 (jan 2022). ☒ (8) 52.222-62, Paid Sick Leave Under Executive Order 13706 (jan 2022) (e.o. 13706). ☐ (9) 52.226-6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42 U.s.c. 1792). (d) Comptroller General Examination Of Record. The Contractor Shall Comply With The Provisions Of This Paragraph (d) If This Contract Was Awarded Using Other Than Sealed Bid, Is In Excess Of The Simplified Acquisition Threshold, As Defined In Far 2.101, On The Date Of Award Of This Contract, And Does Not Contain The Clause At 52.215-2, Audit And Records-negotiation. (1) The Comptroller General Of The United States, Or An Authorized Representative Of The Comptroller General, Shall Have Access To And Right To Examine Any Of The Contractor’s Directly Pertinent Records Involving Transactions Related To This Contract. (2) The Contractor Shall Make Available At Its Offices At All Reasonable Times The Records, Materials, And Other Evidence For Examination, Audit, Or Reproduction, Until 3 Years After Final Payment Under This Contract Or For Any Shorter Period Specified In Far Subpart 4.7, Contractor Records Retention, Of The Other Clauses Of This Contract. If This Contract Is Completely Or Partially Terminated, The Records Relating To The Work Terminated Shall Be Made Available For 3 Years After Any Resulting Final Termination Settlement. Records Relating To Appeals Under The Disputes Clause Or To Litigation Or The Settlement Of Claims Arising Under Or Relating To This Contract Shall Be Made Available Until Such Appeals, Litigation, Or Claims Are Finally Resolved. (3) As Used In This Clause, Records Include Books, Documents, Accounting Procedures And Practices, And Other Data, Regardless Of Type And Regardless Of Form. This Does Not Require The Contractor To Create Or Maintain Any Record That The Contractor Does Not Maintain In The Ordinary Course Of Business Or Pursuant To A Provision Of Law. (e) (1) Notwithstanding The Requirements Of The Clauses In Paragraphs (a), (b), (c), And (d) Of This Clause, The Contractor Is Not Required To Flow Down Any Far Clause, Other Than Those In This Paragraph (e)(1), In A Subcontract For Commercial Products Or Commercial Services. Unless Otherwise Indicated Below, The Extent Of The Flow Down Shall Be As Required By The Clause- (i) 52.203-13, Contractor Code Of Business Ethics And Conduct (nov 2021) (41 U.s.c. 3509). (ii) 52.203-19, Prohibition On Requiring Certain Internal Confidentiality Agreements Or Statements (jan 2017) (section 743 Of Division E, Title Vii, Of The Consolidated And Further Continuing Appropriations Act, 2015 (pub. L. 113-235) And Its Successor Provisions In Subsequent Appropriations Acts (and As Extended In Continuing Resolutions)). (iii) 52.204-23, Prohibition On Contracting For Hardware, Software, And Services Developed Or Provided By Kaspersky Lab And Other Covered Entities (nov 2021) (section 1634 Of Pub. L. 115-91). (iv) 52.204-25, Prohibition On Contracting For Certain Telecommunications And Video Surveillance Services Or Equipment. (nov 2021) (section 889(a)(1)(a) Of Pub. L. 115-232). (v) 52.204-27, Prohibition On A Bytedance Covered Application (jun 2023) (section 102 Of Division R Of Pub. L. 117-328) (v) 52.219-8, Utilization Of Small Business Concerns (sep 2023) (15 U.s.c.637(d)(2) And (3)), In All Subcontracts That Offer Further Subcontracting Opportunities. If The Subcontract (except Subcontracts To Small Business Concerns) Exceeds The Applicable Threshold Specified In Far 19.702(a) On The Date Of Subcontract Award, The Subcontractor Must Include 52.219-8 In Lower Tier Subcontracts That Offer Subcontracting Opportunities. (vi) 52.222-21, Prohibition Of Segregated Facilities (apr 2015). (vii) 52.222-26, Equal Opportunity (sep 2015) (e.o.11246). (viii) 52.222-35, Equal Opportunity For Veterans (jun 2020) (38 U.s.c.4212). (ix) 52.222-36, Equal Opportunity For Workers With Disabilities (jun 2020) (29 U.s.c.793). (x) 52.222-37, Employment Reports On Veterans (jun 2020) (38 U.s.c.4212). (xi) 52.222-40, Notification Of Employee Rights Under The National Labor Relations Act (dec 2010) (e.o. 13496). Flow Down Required In Accordance With Paragraph (f) Of Far Clause 52.222-40. (xii) 52.222-41, Service Contract Labor Standards (aug 2018) (41 U.s.c. Chapter 67). (xiii) (a) 52.222-50, Combating Trafficking In Persons (nov 2021) (22 U.s.c. Chapter 78 And E.o 13627). (b) Alternate I (mar 2015) Of 52.222-50(22 U.s.c. Chapter 78 And E.o 13627). (xiv) 52.222-51, Exemption From Application Of The Service Contract Labor Standards To Contracts For Maintenance, Calibration, Or Repair Of Certain Equipment-requirements (may 2014) (41 U.s.c. Chapter 67). (xv) 52.222-53, Exemption From Application Of The Service Contract Labor Standards To Contracts For Certain Services-requirements (may 2014) (41 U.s.c. Chapter 67). (xvi) 52.222-54, Employment Eligibility Verification (may 2022) (e.o. 12989). (xvii) 52.222-55, Minimum Wages For Contractor Workers Under Executive Order 14026 (jan 2022). (xviii) 52.222-62, Paid Sick Leave Under Executive Order 13706 (jan 2022) (e.o. 13706). (xix) (a) 52.224-3, Privacy Training (jan 2017) (5 U.s.c. 552a). (b) Alternate I (jan 2017) Of 52.224-3. (xx) 52.225-26, Contractors Performing Private Security Functions Outside The United States (oct 2016) (section 862, As Amended, Of The National Defense Authorization Act For Fiscal Year 2008; 10 U.s.c. Subtitle A, Part V, Subpart G Note). (xxi) 52.226-6, Promoting Excess Food Donation To Nonprofit Organizations (jun 2020) (42 U.s.c. 1792). Flow Down Required In Accordance With Paragraph (e) Of Far Clause 52.226-6. (xxii) 52.232-40, Providing Accelerated Payments To Small Business Subcontractors (mar 2023) (31 U.s.c. 3903 And 10 U.s.c. 3801) (xxiii) 52.247-64, Preference For Privately Owned U.s.-flag Commercial Vessels (nov 2021) (46 U.s.c. 55305 And 10 U.s.c.2631). Flow Down Required In Accordance With Paragraph (d) Of Far Clause 52.247-64. (2) While Not Required, The Contractor May Include In Its Subcontracts For Commercial Products And Commercial Services A Minimal Number Of Additional Clauses Necessary To Satisfy Its Contractual Obligations. (xiii) Additional Requirements/terms And Conditions: clauses: 52.203-3 Gratuities (apr 1984) 52.204-4 Printed Or Copied Double-sided On Postconsumer Fiber Content Paper (may 2011) 52.204-13 System For Award Management Maintenance (oct 2018) 52.217-8 Option To Extend Services (nov 1999) the Government May Require Continued Performance Of Any Services Within The Limits And At The Rates Specified In The Contract. These Rates May Be Adjusted Only As A Result Of Revisions To Prevailing Labor Rates Provided By The Secretary Of Labor. The Option Provision May Be Exercised More Than Once, But The Total Extension Of Performance Hereunder Shall Not Exceed 6 Months. The Contracting Officer May Exercise The Option By Written Notice To The Contractor Within 30. 52.217-9 Option To Extend The Term Of The Contract (mar 2000) (a)the Government May Extend The Term Of This Contract By Written Notice To The Contractor Within 30 Days; Provided That The Government Gives The Contractor A Preliminary Written Notice Of Its Intent To Extend At Least 60days Before The Contract Expires. The Preliminary Notice Does Not Commit The Government To An Extension. (b)if The Government Exercises This Option, The Extended Contract Shall Be Considered To Include This Option Clause. (c)the Total Duration Of This Contract, Including The Exercise Of Any Options Under This Clause, Shall Not Exceed _5_ Years. 52.228-5 Insurance – Work On A Government Installation (jan 1997) 52.242-17 Government Delay Of Work (apr 1984) 52.252-2 Clauses Incorporated By Reference (feb 1998) this Contract Incorporates One Or More Clauses By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. Also, The Full Text Of A Clause May Be Accessed Electronically At This/these Address(es): federal Acquisition Regulation (far) Clauses: https://www.acquisition.gov/browse/index/far (far Clauses Begin With 52) department Of Agriculture Acquisition Regulation (agar) Clauses: Https://www.acquisition.gov/agar (agar Clauses Begin With 452) far And Agar Deviations To Clauses May Be Viewed At: Policies & Regulations | Usda 52.252-6 Authorized Deviations In Clauses (nov 2020) (a) The Use In This Solicitation Or Contract Of Any Federal Acquisition Regulation (48 Cfr Chapter 1) Clause With An Authorized Deviation Is Indicated By The Addition Of “(deviation)” After The Date Of The Clause. (b) The Use In This Solicitation Or Contract Of Any Agriculture Acquisition Regulation (48 Cfr 4) Clause With An Authorized Deviation Is Indicated By The Addition Of “(deviation)” After The Name Of The Regulation. 452.204-70 Modification For Contract Closeout (deviation Jul 2022) upon Contract Closeout For Contracts Utilizing Simplified Acquisition Procedures (sap) According To Far 13: (a) If Unobligated Funds In The Amount Of $1000 Or Less Remain On The Contract, The Contracting Officer (co) Shall Issue A Unilateral Modification For Deobligation. The Contractor Will Receive A Copy Of The Modification But Will Not Be Required To Provide A Signature. The Co Shall Immediately Proceed With Contract Closeout Upon Completion Of The Period Of Performance, Receipt And Acceptance Of Supplies Or Services, And Final Payment. (b) If Unobligated Funds Of More Than $1000 Remain On The Contract, The Co Shall Issue A Bilateral Modification For Deobligation. The Contractor Will Receive A Copy Of The Modification And Will Be Required To Provide A Signature. (the Co May Also Request A Release Of Claims Be Completed By The Contractor, Although Not Required For Contract And Orders Using Sap Procedures.) If The Bilateral Modification And Release Of Claims Are Not Returned To The Co Within 60 Days, The Co Shall Release The Modification As Unilateral And Proceed With Contract Closeout Upon Completion Of The Period Of Performance, Receipt And Acceptance Of Supplies Or Services, And Final Payment. 452.211-74 Period Of Performance (feb 1988) the Period Of Performance Of This Contract Is From 15 Dec 2023 Through 30 Nov 2024 With The Possibility Of Four Option Years Through 30 Nov 2028. 452.228-71 Insurance Coverage (nov 1996) pursuant To Far Clause 52.228-5, Insurance-work On A Government Installation, The Contractor Will Be Required To Present Evidence To Show, As A Minimum, The Amounts Of Insurance Coverage Indicated Below: (a) Workers Compensation And Employer's Liability. The Contractor Is Required To Comply With Applicable Federal And State Workers' Compensation And Occupational Disease Statutes. If Occupational Diseases Are Not Compensable Under Those Statutes, They Shall Be Covered Under The Employer's Liability Section Of The Insurance Policy, Except When Contract Operations Are So Commingled With A Contractor's Commercial Operations That It Would Not Be Practical To Require This Coverage. Employer's Liability Coverage Of At Least $100,000 Shall Be Required, Except In States With Exclusive Or Monopolistic Funds That Do Not Permit Worker's Compensation To Be Written By Private Carriers. (b) General Liability. (1) The Contractor Shall Have Bodily Injury Liability Coverage Written On A Comprehensive Form Of Policy Of At Least $500,000 Per Occurrence. (2) The Contractor Shall Have Property Damage Liability Insurance Shall Be Required In The Amount Of $500,000 Per Occurrence. (c) Automobile Liability. The Contractor Shall Have Automobile Liability Insurance Written On A Comprehensive Form Of Policy. The Policy Shall Provide For Bodily Injury And Property Damage Liability Covering The Operation Of All Automobiles Used In Connection With Performing The Contract. Policies Covering Automobiles Operated In The United States Shall Provide Coverage Of At Least $200,000 Per Person And 500,000 Per Occurrence For Bodily Injury And $20,000 Per Occurrence For Property Damage Or Loss. (d) Aircraft Public And Passenger Liability. When Aircraft Are Used In Connection With Performing The Contract, The Contractor Shall Have Aircraft Public And Passenger Liability Insurance. Coverage Shall Be At Least $200,000 Per Person And $500,000 Per Occurrence For Bodily Injury, Other Than Passenger Injury. Coverage For Passenger Injury Shall Be At Least $200,000 Multiplied By The Number Of Seats Or Passengers, Whichever Is Greater. 452.236-73 Archaeological Or Historic Sites (feb 1988) if A Previously Unidentified Archaeological Or Historic Site(s) Is Encountered, The Contractor Shall Discontinue Work In The General Area Of The Site(s) And Notify The Contracting Officer Immediately. 452.237-74 Key Personnel (feb 1988) (a) The Contractor Shall Assign To This Contract The Following Key Personnel: Primary Equipment Operator. (b) During The First Ninety (90) Days Of Performance, The Contractor Shall Make No Substitutions Of Key Personnel Unless The Substitution Is Necessitated By Illness, Death, Or Termination Of Employment. The Contractor Shall Notify The Contracting Officer Within 15 Calendar Days After The Occurrence Of Any Of These Events And Provide The Information Required By Paragraph (c) Below. After The Initial 90-day Period, The Contractor Shall Submit The Information Required By Paragraph (c) To The Contracting Officer At Least 15 Days Prior To Making Any Permanent Substitutions. (c) The Contractor Shall Provide A Detailed Explanation Of The Circumstances Necessitating The Proposed Substitutions, Complete Resumes For The Proposed Substitutes, And Any Additional Information Requested By The Contracting Officer. Proposed Substitutes Should Have Comparable Qualifications To Those Of The Persons Being Replaced. The Contracting Officer Will Notify The Contractor Within 15 Calendar Days After Receipt Of All Required Information Of The Decision On Substitutions. The Contract Will Be Modified To Reflect Any Approved Changes Of Key Personnel. provisions: 52.201-1 Acquisition 360: Voluntary Survey (sep 2023) (a)all Actual And Potential Offerors Are Encouraged To Provide Feedback On The Preaward And Debriefing Processes, As Applicable. Feedback May Be Provided To Agencies Up To 45 Days After Award. The Feedback Is Anonymous, Unless The Participant Self-identifies In The Survey. Actual And Potential Offerors Can Participate In The Survey By Selecting The Following Link: Https://www.acquisition.gov/360. (b)the Contracting Officer Will Not Review The Information Provided Until After Contract Award And Will Not Consider It In The Award Decision. The Survey Is Voluntary And Does Not Convey Any Protections, Rights, Or Grounds For Protest. It Creates A Way For Actual And Potential Offerors To Provide The Government Constructive Feedback About The Preaward And Debriefing Processes, As Applicable, Used For A Specific Acquisition. 52.204-7 System For Award Management (oct 2018) 52.204-16 Commercial And Government Entity Code Reporting (aug 2020) 52.217-5 Evaluation Of Options. (july 1990) except When It Is Determined In Accordance With Far 17.206(b) Not To Be In The Government’s Best Interests, The Government Will Evaluate Offers For Award Purposes By Adding The Total Price For All Options To The Total Price For The Basic Requirement. Evaluation Of Options Will Not Obligate The Government To Exercise The Option(s). 52.237-1 Site Visit (apr 1984) offerors Or Quoters Are Urged And Expected To Inspect The Site Where Services Are To Be Performed And To Satisfy Themselves Regarding All General And Local Conditions That May Affect The Cost Of Contract Performance, To The Extent That The Information Is Reasonably Obtainable. In No Event Shall Failure To Inspect The Site Constitute Grounds For A Claim After Contract Award. 52.252-1 Solicitation Provisions Incorporated By Reference (feb 1998) this Solicitation Incorporates One Or More Solicitation Provisions By Reference, With The Same Force And Effect As If They Were Given In Full Text. Upon Request, The Contracting Officer Will Make Their Full Text Available. The Offeror Is Cautioned That The Listed Provisions May Include Blocks That Must Be Completed By The Offeror And Submitted With Its Quotation Or Offer. In Lieu Of Submitting The Full Text Of Those Provisions, The Offeror May Identify The Provision By Paragraph Identifier And Provide The Appropriate Information With Its Quotation Or Offer. Also, The Full Text Of A Solicitation Provision May Be Accessed Electronically At This/these Address(es): federal Acquisition Regulation (far) Provisions: https://www.acquisition.gov/browse/index/far (far Provisions Begin With 52) department Of Agriculture Acquisition Regulation (agar) Provisions: Https://www.acquisition.gov/agar (agar Provisions Begin With 452) far And Agar Deviations To Provisions May Be Viewed At: Policies & Regulations | Usda 52.252-5 Authorized Deviations In Provisions (nov 2020) (a) The Use In This Solicitation Of Any Federal Acquisition Regulation (48 Cfr Chapter 1) Provision With An Authorized Deviation Is Indicated By The Addition Of "(deviation)" After The Date Of The Provision. (b) The Use In This Solicitation Of Any Agriculture Acquisition Regulation (48 Cfr Chapter 4) Provision With An Authorized Deviation Is Indicated By The Addition Of "(deviation)" After The Name Of The Regulation. (xiv) Defense Priorities And Allocation System (dpas) Rating: N/a (xv) Date, Time, And Place Offers Are Due 6 December 2023, 3:00 P.m. Pst, All Offers Must Be Emailed To Robert.briney@usda. (xvi) Government Point Of Contact Robert Briney, Contracting Officer, Robert.briney@usda.gov

Italy-trieste: Integrated Telecommunications Services

Details: Preamble The Helmholtz-Zentrum Hereon GmbH (HEREON) is a non-profit research institution and one of the 18 member institutions of the Hermann von Helmholtz Association of German Research Centres EV. 90% of Hereon's expenses are financed by the federal government (BMBF - Federal Ministry of Education and Research) and 10% by the four consortium states (Schleswig-Holstein, Hamburg, Lower Saxony and Brandenburg). The statutory task of the company is to conduct research and development in a multidisciplinary network, particularly in the areas of materials research, coastal, climate and environmental research and regenerative medicine. Technical description: A fully automatic system for reverse electrodialysis (RED) is to be purchased - complete RED facility, including power supply and current sink box. - The system should be able to be adapted to RED cells of different sizes. The cells should be standard measuring cells for reverse electrodialysis. The cells should be equipped with the possibility to connect two reference electrodes and a stack of membranes. The desired cell sizes are given below. The supplier should also provide punching tools for cutting the membranes in any of these sizes. - Active membrane area: 200 cm2 Cell size 125 x 260 mm - Active membrane area: 64 cm2 Cell size 110 x 110 mm - Active membrane area: 8 cm2 Cell size 60 x 40 mm Feed and electrolyte system - Feed system with a 2 liter polypropylene (PP) feed cylinder for concentrate and diluent vessels, which can be added externally. - Pre-filter for both concentrate and diluent streams. - Including pressure measurement and control system. Accessories for flow and measurement - Tripod set for mounting the system components. - Flow adapter for efficient process monitoring. - Two conductivity meters and one PH meter for process control. Pump and dosing system - Peristaltic pump for dosing, suitable for automatic PH stabilization in diluate or maintaining conductivity by saline dosing. Measurement and control software - Software package for real-time data acquisition and control. - Functions for online display of process parameters. - Interface for U/I setting (voltage/current control). Accessories for connectors and hoses - Complete set of connection hoses and wires for system operation. Kit components - Electronic flow meters for precise measurement of flow rate. - Reference electrode set for accurate potential measurements. - Display and measurement of current data (ampere) Other requirements: - Delivery must be made by 15.12.2024, otherwise the project funds will expire - Including transport, unloading, installation, instruction

Details: Description The National Library Of The Philippines (nlp), Through The Fy 2024 General Appropriations Act Intends To Apply The Sum Of Seven Million Seven Hundred Fifty Nine Thousand Four Hundred Seventy Eight Pesos And 40/100 (php7,759,478.40) Being The Abc To Payments Under The Contract For Pb24-14 Supply And Delivery Of Ict Equipment, Devices & Accessories (second Posting). Bidding Will Be Through Lot Bidding (4 Lots). Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. Lot No. Project Description Abc Cost Of Bidding Docs Bid Opening Venue Supply And Delivery Of Ict Equipment, Devices & Accessories (second Posting) (php7,759,478.40) November 13, 2024; 10:01 Am 6th Floor Function Rm, Nlp Bldg, T.m. Kalaw St. Ermita, Manila Lot 1 Ict Equipment Php5,955,000.00 Php10,000.00 Lot 2 Tablet Php1,200,000.00 Php5,000.00 Lot 3 Ict Devices & Accessories Php440,022.40 Php500.00 Lot 4 Ict Supplies Php104,456.00 Php500.00 2. The National Library Of The Philippines (nlp), Now Invites Bids For The Above Procurement Project. Delivery Of The Goods Is Required Within Sixty (60) Calendar Days. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) No. 9184. A.bidding Is Restricted To Filipino Citizens/sole Proprietorship, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Prospective Bidders May Obtain Further Information From Nlp Bids And Awards Committee (bac) Secretariat Email Address And Inspect The Bidding Documents Posted At The Philippine Government Electronic Procurement System (philgeps) Or In Our Official Website Web.nlp.gov.ph. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On October 22, 2024 Through Email And Website(s) Below. The Procuring Entity Shall Allow The Bidder To Present Its Proof Of Payment For The Fees Through Electronic Means Or By Presenting The Official Receipt In Person. 6. The Nlp Will Hold A Pre-bid Conference On October 30, 2024 At 10:00 Am Through Video Conferencing Via Zoom Which Shall Be Open To All Prospective Bidders. Send Interest To Bac@nlp.gov.ph With Subject: Request To Join The Pre-bid Conference Of Public Bidding No. 24-14. 7. Bids Must Be Duly Received By The Bac Secretariat Through Manual Submission At The Office Address Below On Or Before November 13, 2024 At 10:00 Am. Usb Flash Drive Containing The Soft Copy Of The Technical (in Pdf) And Financial (in Word Or Excel) Requirements Must Be Included In The Original Copy Of The Technical Documents. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On November 13, 2024 At 10:01 Am At The 6th Floor Function Room, Nlp Building. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend The Activity. 10. The Nlp Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Sections 35.6 And 41 Of The 2016 Revised Irr Of Ra No. 9184, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Maureen M. Terrenal Marie Joy H. Bestoir Eleanor C. Siyang Jonathan F. Santos Bac Secretariat National Library Of The Philippines Tel. No.: (02) 5314-2100loc. 406 / 412 Email: Bac@nlp.gov.ph Website: Web.nlp.gov.ph 12. You May Visit The Following Websites: For Downloading Of Bidding Document: Web.nlp.gov.ph / Www.philgeps.gov.ph Sgd. Maricel M. Ureña Bac, Chairperson Lot 1 Ict Equipment 1.) 3lcd Projector, 1920 X 1080(full Hd), 4,000 Lumens (4 Pcs) Specification • Lcd: • Size: 0.61” (c2fine) • Native Resolution: 1080p • Lightsource: • Lamp Life: (normal / Eco): 5,500 / 12,000 Hrs • Type: 230w Uhe • Aspect Ratio: 16:9 • Projection Lens: • Zoom Ratio: 1 – 1.6 • Throw Ratio: 1.32 – 2.14 (wide To Tele) • F-number: 1.51 – 1.99 • Focal Length: 18.20 – 29.20 Mm • Type: Optical Zoom (manual) / Focus (manual) • Projectors Facets: • Resolution, Projectors Facets: Fullhd • Contrast Ratio, Projectors Facets: 16,000:1 • Brightness Range Lumens, Projectors Facets: 2000 • Laser / Lamp, Projectors Facets: Lamp • Power Supply Voltage: 100 – 240 V Ac ±10%, 50/60 Hz • Projection Technology: Rgb Liquid Crystal Shutter Projection System (3lcd) • White Light Output (normal/eco): 4,000 Lm • Colour Light Output: 4,000 Lm • Contrast Ratio: 16,000:1 • Connectivity: • Usb Interface: • Usb Type A: 1 (for Wireless Lan, Firmware Update, Copy Osd Settings) • Usb Type B: 1 (for Firmware Update, Copy Osd Settings) • Network: • Wireless: Built-in • Analog Input: 1 Rca, D-sub 15pin • Digital Input: Hdmi • Audio Input: 2rca (white & Red) Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 2.) All-in-one Computer (19 Pcs) Specification • Processor: At Least Intel Corei5, 12th Generation • Memory: At Least 8gb Ddr4 So-dimm X 2, Memory Max Up To:64gb Ddr4 • Display: At Least 23.8-inch, Fhd (1920 X 1080) 16:9, Wide View, 250nits • Storage: With At Least 512gb Ssd Storage • Network: Wi-fi 6, Ieee 802.11 A/b/g/n/ac/ax; Gigabit Ethernet; Bluetooth 5.2 Or Above • Os: Windows Pro Os 64bit Or Better • Ports: With 1x Kensington Lock, 1x 3.5mm Combo Audio Jack, 1x Usb 2.0 Type-a, 1x Dc-in, 1x Rj45 Gigabit Ethernet, 1x Hdmi Out 1.4, 1x Hdmi In 1.4, 3x Usb 3.2 Gen 1 Type-a, 1x Usb 2.0 Type-a, 1x Usb 3.2 Gen 1 Type-c • Camera: 720p Hd Camera With Privacy Shutter • Input: Wired Optical Mouse (usb) And Wired Grey Keyboard (usb) With International Language Support With Backlit Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turn-around Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. A Certificate Of Authenticity (coa), Genuine Label, Equivalent Of The License From The Os Provider Should Be Provided (holographic Image Sticker) Or Dvd Installer And Product Key. The Prospective Supplier Can Provide Either Of The Four Items Mentioned And It Must Be Stated On Your Submitted Document. 6. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 3.) Document Scanner, A4 Duplex Sheet-fed (2 Unit) Specification Scanning: • Scanner Type: A4 Flatbed Colour Image Scanner • Sensor Type: Cis • Light Source: White Led • Optical Resolution: 1,200 X 1,200 Dpi • Output Resolution: 50-1,200 Dpi (1 Dpi Increments) • Max Document Size: 216 X 297 Mm Scan Speed: • Flatbed (black / Colour): • 200 Dpi: 6.0 Sec / 7.0 Sec • 300 Dpi: 6.0 Sec / 7.0 Sec • 600 Dpi: 14 Sec / 26 Sec • Adf Monochrome (simplex / Duplex): • 200 Dpi: 25ppm / 10ipm • 300 Dpi: 25ppm / 10ipm • 600 Dpi: 10ppm / 6.0ipm • Adf Colour (simplex / Duplex): • 200 Dpi: 25ppm / 10ipm • 300 Dpi: 25ppm / 10ipm • 600 Dpi: 10ppm / 6.0ipm Adf Specifications: • Scanner Type: A4 Sheet-fed , 3-pass Duplex Scanner • Optical Sensor: Cis • Light Source: Rgb Led • Optical Resolution: 600 Dpi X 600 Dpi • Output Resolution: 50 – 1,200 Dpi (in 1 Dpi Increments) • Min Document Size: 89 X 127 Mm (simplex), 89 X 170 Mm (duplex) • Max Document Size: 215.9 X 3,048 Mm • Support Paper Thickness: 50 Gsm – 120 Gsm • Adf Capacity: 50 Sheets • Automatic Duplex Scanning:yes (3-pass) • Daily Duty Cycle:up To 1,500 Pages / Day • File Format: Jpeg, Tiff, Multi-tiff, Pdf, Searchable Pdf, Bmp, Png, Jpeg2000, Docx, Xlsx, Pptx • Os Compatibility: Mac Os X 10.6.8 Or Later, Windows Server 2003 / 2008 / 2012, Windows Xp Sp3 / Vista / 7 / 8 / 8.1 / 10 • Scanner Driver Compatibility: Twain, Isis, Sane, Wia, Ica • Rated Voltage: Ac 100-240v Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 4.) 27-inch Fhd Ips | 75hz | Vga + Hdmi Monitor (12 Pcs) Technical Specifications Display: 27 Inches Technology: Ips Brightness: 250 Cd/m2 Max Resolution: 1920x1080 @75hz Response Time: 1ms (vrb) Contrast Ratio: 100,000,000:1 Viewing Angle: 178 Degrees (h), 178 Degrees (v) Colors: 16.7 Million Input Signal: Vga + Hdmi Speaker: None Power Supply: 100 - 240v External Glare: None Wall Mount: 100 X 100 Mm Video Cable/s: H.cable X1 5.) Inkjet Printer (3 Pc) Specification • Printer Type: Print, Scan, Copy • Rated Voltage: Ac 100-240v Printing Technology: • Print Method: On-demand Inkjet • Nozzle Configuration: 180 X 1 Nozzles Black, 59 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) • Maximum Resolution: 5760 X 1440 Dpi Copying: • Maximum Copies From Standalone: 20 Copies • Maximum Copy Resolution: 600 X 600 Dpi • Maximum Copy Size: A4, Letter Scanning: • Scanner Type: Flatbed Colour Image Scanner • Sensor Type: Cis • Optical Resolution: 600 X 1200 Dpi • Maximum Scan Area: 216 X 297 Mm Scan Speed: • Flatbed (black / Colour): 200dpi: Up To 11 Sec / Up To 32 Sec Paper Handling: • Number Of Paper Trays: 1 • Standard Paper Input Capacity: Up To 100 Sheets Of Plain Paper (80 G/m2) Up To 20 Sheets Of Premium Glossy Photo Paper • Output Capacity: Up To 30 Sheets Of Plain Paper (80 G/m2) Up To 20 Sheets Of Premium Glossy Photo Paper • Maximum Paper Size: 215.9 X 1200 Mm • Paper Sizes: Legal (8.5 X 14"), Indian-legal (215 X 345 Mm), 8.5 X 13", Letter, A4, 16k (195 X 270 Mm), B5, A5, B6, A6, Hagaki (100 X 148 Mm), 5 X 7", 5 X 8", 4 X 6", Envelopes: #10, Dl, C6 Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 6.) Laptop Computer I5 (34 Pcs) Specification • At Least Intel Corei5, 11th Generation • Processor: At Least Intel Corei5, 2.40ghz, 8mb Cache, 4cores, 8threads, 11th Generation • Memory: At Least 16gb [1x 16gb] Of Ddr4 3200mhz System Memory, Upgradable To 32gb [dual-channel] • Display: At Least 14.0" Display With Ips, Full Hd 1920 X1080 • Graphics: At Least Intel® Graphics • Storage: At Least 512gb Pcie Nvme Ssd • Network: Wi-fi 6, Ieee 802.11 A/b/g/n/ac/ax; Gigabit Ethernet; Bluetooth 5.2 Or Above • Camera: At Least 1280x720 Resolution • Os: Windows Pro Os 64bit Or Better • Ports: With Usb 3.2 Gen 2; Usb 3.2 Gen 1; Rj-45; Hdmi 2.0 Port; 3.5mm Jack • Battery: 12 Hours - 15 Hours Of Runtime With At Least 56 Wh Battery Energy • Input: Keyboard With International Language Support With Backlit Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. A Certificate Of Authenticity (coa), Genuine Label, Equivalent Of The License From The Os Provider Should Be Provided (holographic Image Sticker) Or Dvd Installer And Product Key. The Prospective Supplier Can Provide Either Of The Four Items Mentioned And It Must Be Stated On Your Submitted Document. 6. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 7.) Laptop Computer I9 (4 Unit) Specification • At Least Intel Core I9, 14th Generation, • Processor: At Least Intel Core I9, 36 Mb Smart Cache, 2.2 Ghz Performance, 14th Generation • Memory: At Least 16gb Of Ddr5 5600mhz System Memory, Upgradable To 32gb [dual-channel] • Display: At Least 16.0" Display With Ips (in-plane Switching) Technology, Wqxga 2560 X 1600, High-brightness (500 Nits) • Graphics: At Least Nvidia® Geforce Rtx™ 4060 With 8 Gb Of Dedicated Gddr6 Vram, Supporting 3072 Nvidia® Cuda® Cores. • Storage: At Least 512gb Nvme Ssd; Upgradeable To Maximum Of 1tb • Network: Wi-fi 6, Ieee 802.11 A/b/g/n/ac/ax; Gigabit Ethernet; Bluetooth 5.3 Or Above • Camera: At Least 1280x720 Resolution • Os: Windows 11 Professional Or Better • Ports: With Usb 3.2 Gen 2; Usb 3.2 Gen 1; Rj-45; Hdmi 2.0 Port; 3.5mm Jack • Battery: 12 Hours - 15 Hours Of Runtime With At Least 90 Wh Battery Energy • Input: Keyboard With International Language Support With Backlit Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. A Certificate Of Authenticity (coa), Genuine Label, Equivalent Of The License From The Os Provider Should Be Provided (holographic Image Sticker) Or Dvd Installer And Product Key. The Prospective Supplier Can Provide Either Of The Four Items Mentioned And It Must Be Stated On Your Submitted Document. 6. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 8.) Multifunction Printer (ecotank A3, Photocopying Machine) (5 Unit) Specification • Printer Type: Print, Scan, Copy, Fax With Adf • Interface: • Usb: Usb 2.0 • Network: Ethernet, Wi-fi Ieee 802.11 B/g/n, Wi-fi Direct • Network Protocol: Tcp/ipv4, Tcp/ipv6 • Network Management Protocols: Snmp, Http, Dhcp, Bootp, Apipa, Ping, Ddns, Mdns, Sntp, Slp, Wsd, Lltd • Rated Voltage: Ac 100-240v Printing Technology: • Print Method: Printhead • Nozzle Configuration: 800 X 1 Nozzles Black, 256 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) • Maximum Resolution: 4800 X 2400 Dpi Copy Function: • Reduction / Enlargement: 25 - 400% • Maximum Copy Size: A3 • Copy Resolution: 600 X 600 Dpi Scanning: • Scanner Type: Flatbed Colour Image Scanner • Sensor Type: Cis • Optical Resolution: 1200 X 2400 Dpi • Maximum Scan Area: 297 X 431.8 (mm) Scan Speed: • Scan Speed (flatbed / Adf (simplex | Duplex)): 200dpi, Black: 5 Sec / Up To 26.0 Ipm | 11.5 Ipm 200dpi, Colour: 10 Sec / Up To 9.0 Ipm | 6.0 Ipm Adf Specifications: • Support Paper Thickness: 64-95 G/m2 • Paper Capacity: 50 Sheets Paper Handling: • Number Of Paper Trays: 3 (front 2, Rear 1) • Standard Paper Input Capacity: • Cassette 1: 250 Sheets For A4 Plain Paper (80g/m2), 50 Sheets For Premium Glossy Photo Paper • Cassette 2: 250 Sheets For A4 Plain Paper (80 G/m2) • Rear Slot: 50 Sheets For A4 Plain Paper (80 G/m2), 20 Sheets For Premium Glossy Photo Paper • Maximum Paper Size: 329 X 6000 Mm • Paper Sizes: A3, Super B (13 X 19"), Indian Legal, Letter, A4, 16k (195 X 270mm), 8k (270 X 390mm), Executive (7.25 X 10.5"), B4, B5, A5, B6, A6, 8.5 X 13", 5 X 7", 4 X 6", 8 X 10", Legal (8.5 X 14"), 16:9 Wide, Envelopes: #10, Dl, C6, C4 Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 9.) Document Scanner, A3 Duplex Sheet-fed (1 Pc) Specification • Scanner Type: A3 Sheet-fed, One Pass Duplex Colour Scanner • Sensor Type: Colour Cis • Scanning Method: Fixed Carriage And Moving Document • Light Source: White Led • Optical Resolution: 600 X 600 Dpi • Output Resolution: 50-1,200 Dpi (1 Dpi Increments) • Scanner Bit Depth (colour): 30-bit Input, 24-bit Output • Scanner Bit Depth (grayscale): 10-bit Input, 8-bit Output • Scanner Bit Depth (black & White): 10-bit Input, 1-bit Output • Rated Voltage: Ac 100-240v Scan Speed: • Adf Monochrome (simplex/duplex): • 200 Dpi: 70ppm / 140ipm • 300dpi: 70ppm / 140ipm • 600dpi: 70ppm / 140ipm Adf Specifications: • Min Document Size: 50.8 X 69mm • Max Document Size: 304.8 X 5588mm • Support Paper Thickness: 27-413 Gsm Adf Capacity: • A4: 120 Sheets, A3:60 Sheets • Automatic Duplex Scanning: Yes • Daily Duty Cycle: Up To 30,000 Pages / Day • Multi-feed Detection: Ultrasonic Sensor And Length Detection • Connectivity: Usb 3.0 • File Format: Jpeg, Tiff, Multi-tiff, Pdf, Searchable Pdf, Bmp, Png, Jpeg2000, Docx, Xlsx, Pptx • Os Compatibility: Mac Os X 10.6.8 Or Later, Windows Server 2003 / 2008 / 2012 / 2016 / 2019, Windows Xp Sp3 / Vista / 7 / 8 / 8.1 / 10 • Scanner Driver Compatibility: Twain, Isis, Sane, Wia, Ica Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 10.) Smart Tablet (5 Units) Specification • Tablet, 10.9 Inches, • Network: Gsm / Hspa / Lte / 5g • Display: Ips Lcd, 90hz, 10.9 Inches, 1440 X 2304 Pixels • Os: Android 13, Upgradable To Android 14, One Ui 6 • Chipset: Exynos 1380 (5 Nm) • Cpu: Octa-core (4x2.4 Ghz Cortex-a78 & 4x2.0 Ghz Cortex-a55) • Gpu: Mali-g68 Mp5 • Memory: Internal, 128gb 6gb Ram • Camera: 8 Mp (rear, Wide), 12 Mp (front, Ultrawide), 4k@30fps, 1080p@30fps • Communication: Wi-fi 802.11 A/b/g/n/ac/6, Dual-band, Wi-fi Direct, Bluetooth 5.3, Dual Sim - Single Sim Card For Cellular Connectivity, In Addition To Esim Capability • Port: Usb Type-c 2.0, Magnetic Connector • Battery: Li-po 8000 Mah, Non-removable • Included: Ip68 Dust & Water Protection, Vision Booster, Dual Speakers By Akg, Fingerprint (power Key), Ip68 Spen Included In-box • Accessories: Data Cable, Quick Start Guide, Original Charger And Other Accessories Packaged With Product Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 11.) Smart Tablet (4 Units) Specification • Tablet, 9 Inches, • Network: Gsm, Hspa, Lte, • Display: 9" Hd (1340 X 800), Ips, Touchscreen, 400 Nits • Os: Android 12 • Chipset: Mediatek Mt6769v/cu Helio G80 (12 Nm) • Cpu: Octa-core (2x2.0 Ghz Cortex-a75 & 6x1.8 Ghz Cortex-a55) • Gpu: Mali-g52 Mc2 • Memory: 4 Gb Lpddr4x • Storage: 64 Gb Emmc • Camera: 2mp Ff Front + 8mp Af Back • Communication: 802.11 A/b/g/n/ac & Bluetooth® 5.1 • Port: Usb Type-c 2.0 • Battery: Li-po 5100 Mah, 10w Wired, Non-removable • Accessories: Data Cable, Quick Start Guide, Original Charger And Other Accessories Packaged With Product Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 12.) 65" 4k Touch Enabled Viewboard Smart Display With Pc For View Board, 4k Wide Angle Conference Camera, And Slim Trolley Cart (4 Pcs) Specification Viewboard Specs • Display Type: 65" Lcd, 3840 X 2160 • Os: Os Based On Android 9.0 (upgradable To Android 11) • Gpu: Arm Mali-g52 • Cpu: Arm Quad Core A73 • Cpu Processor Speed: 1.8ghz • Memory: 4gb Lpddr4 • Storage: 32gb Emmc • Microphone: Beamforming Array X 8, Noise Cancelation • Internal Speakers: 15w (x2) • Port: Hdmi 2.0, Vga, Spdif, Usb 2.0, Usb 3.1, Ops Pc Slot, Rs232, Rj45, Intel® Ops Slot In (80-pin), Line In • Voltage: 100-240 Vac • Communication: 802.11ax + Bluetooth 5.2, (10/100/1000m) (usb Type-c 10/100, Android & Pc 10/100/1000) • Touch Technology: Infrared • Touch Points: Windows: 33, Android: 20 • Package Contents: 65" 4k Touch Enabled Viewboard Smart Display, Stylus Pen X 2, Eraser, Power Cable, Hdmi Cable, Usb Cable, Av Cable, Remote Control With Batteries, Camera Plate, M8 Screw X 8, Quick Start Guide Pc For View Board Specs • Processor: At Least Intel Core I5-10400t 2.0ghz Turbo Boost 3.6ghz • Memory: At Least 8gb Ddr4 • Display: Compatible With The Viewboard Smart Display • Graphics: At Least Integrated Intel® Uhd Graphic 630 Intel H510 Chipset • Storage: At Least 256gb Ssd • Network: Gbe Lan Port, Ntel Ax200 Wifi 6 + Bt5.2 Module Dual Band • Os: Windows 11 Pro (windows 10 Pro Downgrade Preinstalled) • Ports: With Usb X 4 (usb 3.2 X 1, Usb 2.0 X 3) • Package Contents: Pc, Documentation, Quick Start Guide, Screw X 2 And Other Accessories Packaged With Product. 4k Wide Angle Conference Camera Specs • Resolution: 8.5mp Refers To The Resolution Of Its Image Sensor. This Means That The Camera's Sensor Is Capable Of Capturing Images At A Resolution Of 8.5 Megapixels, Which Translates To Higher Image Clarity And Detail. For Video, This 8.5mp Sensor Allows The Camera To Output 4k Resolution Which Means Its Display Resolution Is 3840 X 2160 Pixels. • Mic: Beamforming Microphone With 4 Microphones • Lens: 5x Digital Zoom, Pan/tilt ±15° • Audio: 8w Speaker • Ports: Hdmi 2.0, Usb 2.0, Usb 3.0, Ethernet Lan (rj45) • Compatible With: Viewboard Smart Display • Package Contents: Conference Camera, Documentation, Remote Control, Power Adapter, Bracket, Usb Type-c Cable, Bracket Screw X 6, Wall Anchor X 6 And Other Accessories Packaged With Product Slim Trolley Cart • Vesa Compatible: 400x400 - 1070x600 • Weight Capacity: 243 Lbs. • Orientation: Landscape • Compatible With: Viewboard Smart Display Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. 13. Smartphone For Documentation (1 Set) Cpu: A15 Bionic Chip Or Equivalent Capacity: 128gb Or Better Display: At Least 6.1” All Screen Xdr Oled Display Or Equivalent; 1170 X 2532 Pixels Or Better Rated Ip68 Water Resistant Camera: At Least 12mp Wide And Ultra-wide Advance Dual Camera System; With Night Mode Video Recording: Capable Of 4k Video Recording And Cinematic Mode Finish: Titanium Design, Ceramic Shield Front, Textured Matte Glass Back Connection: 5g, Wi-fi 6, Bluetooth 5, Nfc With Reader Mode Charging: 1m Isb-c Connector Operating System: Ios 15 Or Equivalent Sim Card: Dual Sim Warranty: At Least 1 Year Lot 2 Tablet 1.) Tablet, All-screen Design With 10.9-inch (25 Units) Specification • Network: Wi-fi + Cellular • Display: Liquid Retina Display, 10.9-inch (diagonal) Led Backlit Multitouch Display With Ips Technology, 2360-by-1640-pixel Resolution At 264 Pixels Per Inch (ppi) • Os: Ipados 17 • Chipset: A14 Bionic Chip • Cpu: 6-core • Gpu: 4-core Graphics, 16-core Neural Engine • Storage: 256gb • Camera: 12mp Wide Camera, Ƒ/1.8 Aperture • Front Camera: Landscape 12mp Ultra Wide Camera, 122° Field Of View • Communication: Wi-fi 6 (802.11ax) With 2x2 Mimo; Speeds Up To 1.2 Gbps & Bluetooth® 5.2 • Port: Usb Type-c 2.0 (up To 480 Mb/s) • Battery: Built‐in 28.6‐watt‐hour Rechargeable Lithium-polymer Battery • Accessories: Usb-c Charge Cable (1 Meter), 20w Usb-c Power Adapter And Other Accessories Packaged With Product Warranty & Service Level Agreement (sla) • Years Parts -1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or Its Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 5. All Requirements Under The Provisions For Protected Products And Services Must Be Accompanied By A Paper Certificate Or An Equivalent Certification And Must Be Submitted On Bid Opening. Lot 3 Ict Devices & Accessories 1.) 4-port 4k Hdmi Splitter (2 Pcs) Specification 1 Port To 4 Hdmi Features 1 In 4 Out Hdmi Splitter: Split One Hdmi Input Signal To Up To Four Hdmi Output Signals Identical To The Input Signal – Input: 1x Hdmi & Outputs: 4x Hdmi Supported Resolution: Up To 4k/30hz, 1080p, 720p, Vga To Wuxga & Supported Audio: Lpcm, Dolby-ac3, Dts7.1, Dsd/dolby Truehd/dts-hd Master Audio, Essentially All Available Audio Options Are Supported Heavy-duty Cool Metal Enclosure Protects The Insides And Keeps The Unit Cool By Aiding In Quick Heat Absorption And Dissipation Compact In Size And Easy Plug & Play Installation, Hdcp Compliant 2.) Full Hd Webcam (webcam 4k) (3 Pcs) Specification • Resolution: 4k/30fps (up To 4096 X 2160 Pixels) 1080p/30 Or 60 Fps (up To 1920 X 1080 Pixels) 720p/30, 60, Or 90 Fps (up To 1280 X 720 Pixels) • Camera Mega Pixel: 13 • Focus Type: Autofocus • Lens Type: Glass • Built-in Mic: Stereo • Mic Range: Up To 1.22 M • Diagonal Field Of View: 90°/78°/65° • Digital Zoom: 5x • Usb Connectivity: Usb-a Plug-and-play • Compatible With: Windows 7 /8 / 8.1 / 10 Or Later • Accessories: Webcam With Detachable Universal Mounting Clip (on Webcam), Attachable Privacy Shutter, Travel Bag, 2.2 M Usb-a To Usb-c Cable, User Documentation And Other Accessories Packaged With Product. Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turn-around Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 3. Brother Large Address Label (dk-1204) (20 Rolls) .66” X 2.1” (17mm X 54.3mm) Multi-purpose Labels (400 White Paper Labels) Die-cut Paper Labels, Black On White, For Use W/ Ql Label Printers 4. Brother Multi-purpose Label (dk-1208) (50 Rolls) 1.4” X 3.5” (38mm X 90.3mm) Large Address Labels (400 White Paper Labels) Die-cut Paper Labels, Black On White, For Use W/ Ql Label Printers 5. External Ssd Hard Drive (2 Pcs) Color: Silver Or Black Texture: Aluminum Top, Woven Fabric Sides Compatibility: Usb 3.2 Gen 2 (usb-c), (usb 3.3) Capacity: 1tb / Windows & Mac (exfat) Customisable Backup / Continuous Backup / Rescue Data Recovery Services 6. Presentation Remote Wireless Pointer Pen (4 Pcs) Specification • Frequency: 2.407-2.475ghz • Control Distance: 20 Meters • Laser Pointer Distance: 50 Meters • Receiver Interface: Usb-a & Usb-c • Battery: 2x Aaa Battery • Working Voltage: 3v • Os Support: Support 10/8.1/7/mac10.7 And Above Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. 7. Speakers (2 Set) Speaker Type 2.0 Speakers Connection Type (audio Input): Analog Stereo (3.5mm) Audio Output: Headphone Power Rating (rms): 3 Watts Driver Size: 2 Inches Input Impedance: 2.5 Ohm Audio Controls (speaker): Volume + Power Indicator Lights (led): Power Cable Length (speakers): 3.5mm Aux: 6ft Or 1.8m Speaker-to-speaker: 4ft Or 1.2m Power Adapter: Yes (100-240v, 5v/0.8a) Cable Length (power/charging): 6ft Or 1.8m Product Dimensions: Width: 84mm (3.5”) Depth/length: 84.5mm (3.32”) Height: 151.5mm (6”) Weight: 548g (19.3 Ounce) 8. Hdmi To Vga Adaptor Kit (2 Pcs) Features Plug And Play Out Of The Box Ready Installation Universal Purpose-built To Work Flawlessly With The Latest In Mobile Mirroring And Streaming Technology Superior Design Ultra-compact Professionally Designed Lightweight Cable Adapter Hd Video Support Video Output To 1920x1080 Supported Tech Specs Video Output To 1920 X 1080/60hz Video Bandwidth: 1.65gbps Inputs: Hdmi X 1, Vga X 1 9. Hdmi Splitter 4k Bi-direction Hdmi2.0 1 In 2 Out/2 Out Switcher Converter (2 Pcs) Product Overview: 4k@60hz Hdmi Two-way Usage: 2 In 1 Out / 1 In 2 Out One-click Switch Aluminum Housing With Compact Design This Bi-directional 4k Hdmi 2.0 Switch Helps Swap The Signal Instantly. Specification Of Signal Transmission Depends On The Devices And The Cables, 3m Or Shorter Hdmi2.0 Cable Is Suggested. With Solid Aluminum-alloy Housing And Premium Construction. Product Features: Bi-directional Usage, Available For Connecting 2 Sources And 1 Hdmi Display, Or 1 Source And 2 Hdmi Displays. Swap The Signal Instantly Between 2 Sources Or 2 Displays By Simply Pressing The Button. Support Up To 4k Ultra-hd Resolution. Backward Compatible. Specification Of Signal Transmission Depends On The Devices And The Cables. 3m Or Shorter Hdmi2.0 Cable (awg26 Or Thicker Conductor) Is Suggested For 4k@60hz, And 10m Or Shorter For 4k Output. Led Indicator For Identifying The Working Status Expression Of The Ports. Solid Aluminum-alloy Housing To Ensures Durability. Premium Construction, To Prevent Damage To The Unit From Static Electricity, And To Ensure Well-functioning Within +80c/-40 C Temperature. Plug And Play. No Power Adapter Needed. 10. Analog Multimeter (1 Pc) Techspecs Dcv : ~500v Dc Acv : ~500v Ac Current: ~250ma Resistance: ~500kohm Battery: Aaax1 11. Digital Hygrometer Indoor Thermometer Sensor (temperature And Humidity Monitor, Aaa Battery) (6 Pcs) Special Feature Hygrometer Humidity Gauge Indicator Digital Indoor Thermometer Color: White Included Components: Temperature And Humidity Monitor, Aaa Battery Included Display Type: Lcd Unit Count: 1.0 Count Power Source: Battery Powered Number Of Batteries: 2 Aaa Batteries Required. (included) Item Length: 4 Inches Response Time: 0.5 Seconds Reusability: Reusable Style: Indoor Hygrometer & Thermometer Item Weight: 3.5 Ounces Temperature Range: -58°f–158°f(-50°c–70°c) Temperature Accuracy: ±2.0°f (±1.1°c) Humidity Range: 10%–99% Humidity Accuracy: 30%–80%: ±2%; Out Of Range: ±3% All-time High And Low Records Refresh Rate: 10 Seconds Comfort Indicator: Dry, Comfortable, Wet Touch Sensitive Backlight 12. Led Light Photography Kit Dimmable With 192 Pcs Led Lights And Tripod Stand (4 Set) Product Features: 3200-5500k Can Adjust The Color Temperature To Achieve Beautiful Skin Led Lights 192pcs Lamp Beads, Adjustable Brightness, To Meet Different Shooting Needs Recessed Handheld Design, Lightweight And Comfortable, Can Be Directly Mounted On A Tripod 270 ° Adjustable Angle, Suitable For Multi-scene Fill Light, Product Fill Light, Portrait Shooting, Video, Etc 1/4 Standard Threaded Tip, Can Work With Suitable Tripods Power: 24w 13. Portable Storage Usb Flashdrive (8 Pcs) Usb Flash Drive 2.0 Capacity: 16gb 14. Portable Storage External Hard Drive (2 Pcs) Capacity: 1 Tb Interface: Atleast Usb 3.2 Gen 1 Compatibility: Windows® 10+ Chrome Os Downloadable Ntfs Driver To Read/write On Macos 11+ Compatibility May Vary Depending On User’s Hardware Configuration And Operating System. Dimensions (l X W X H): 107.2mm X 75mm X 11.15mm In The Box: Portable Hard Drive Superspeed Usb-a Cable (5gbps) Software For Device Management And Backup With Password Protection Quick Install Guide 15. Network Attached Storage Nas Device (compatible With Nlp's Existing Storage Application) (2 Pcs) Computing Cpu: 2 To 2.7 Ghz Quad-core Processor: Intel Celeron J4125 Total Installed Memory: 2 Gb Ddr4 Maximum Memory Capacity: 6 Gb General Number Of Bays: 4 X 2.5"/3.5" Inputs/outputs: 2 X Usb-a 3.0 / 3.1/3.2 Gen 1 2 X Rj45 Gigabit Ethernet Compatible Drive Interface: Sata (unspecified Version) Media Card Slots: Yes Form Factor: Rackmount Raid: Raid 0, 1, 10, 5, 6, Jbod Hot-swap Support: Yes Wake On Lan: Yes Networking Supported Protocols Afp Caldav Ftp L2tp Nfs Openvpn Pptp Smb Snmp Ssh Telnet Webdav Iscsi Software Installed Operating System: Synology Diskstation Manager Supported File Systems: Internal: Btrfs, Ext4 External: Btrfs, Ext3, Ext4, Fat32, Hfs+, Ntfs, Exfat Mobile App Compatible: Yes *as Of June, 2023: Check With Manufacturer For The Most Up-to-date Compatibility Supported Browsers: Chrome, Edge, Firefox, Safari Electrical Ac Input Power: 100 To 240 Vac, 50 / 60 Hz Power Source: Ac Adapter Environmental Operating Temperature: 32 To 104°f / 0 To 40°c Operating Humidity: 8 To 80% Operating Altitude: 0.0 To 16,404' / 0 To 5000 M Storage Temperature: -5 To 140°f / -20 To 60°c Storage Humidity: 5 To 95% Physical Color: Black Status Monitoring: Led Indicator Cooling: 2 X 92 Mm Fans 16. Uninterruptible Power Supply (ups) 1000va/ 600w For Workstation (36 Units) Specification • Main Input Voltage: 230 V • Main Output Voltage: 230 V • Rated Power In W: 600 W • Rated Power In Va: 1000 Va • Output Connection Type: 4 Universal Receptacle • Battery Type: Lead-acid Battery • Network Frequency: 50/60 Hz +/- 5 Hz Auto-sensing • Transfer Time: 6 Ms Typical ; 10 Ms Maximum Warranty & Service Level Agreement (sla) • Years Parts - 1-year Warranty For Parts And Labor, But The Prospective Supplier May Offer An Extended Warranty Service. • < 4 Hours’ Response Time For Issues Reported (thru Help Desk) To Protect The National Library Of The Philippines (nlp) From Unreliable And Unproven Products And Services The Following Provisions Shall Be Required: 1. Manufacturer Of The Proposed Brand Should Be Iso 9000 Certified Or Better. 2. The Proposed Manufacturer's Brand Should Have An Existing Technical Web Support System Where The Providers/ Bidders Can Log-in And Key-in Product Service Codes/item Codes For Faster Tracking Of Defective / Rma Products And Faster Turnaround Of Technical Support. Or It’s Equivalent Certification And Must Be Submitted On Bid Opening. 3. The Proposed Brand Should Have An International Brand Name, Which Means That The Brand Or Item Is Known And Marketed Globally And Have International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. 4. The Brand Offered Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. Lot 4 Ict Supplies 1. Battery 12volts 7 Amp. For Ups (40 Pcs) 2. Battery, 9volts Nimn, Rechargeable (5 Pcs) 3. Battery, Size Aa, Rechargeable (pack Of 2's) (6 Pack) 4. Battery, Size Aaa, Rechargeable (pack Of 2's) (10 Pack) 5. Cable Tie (black - Big ) (100 Pcs) (10 Pack) 6. Cable Tie (black - Small ) (100 Pcs) (11 Pack) 7. Chestertone (nr. 803 Industrial & Marine Solvent Ii) (5 Gal) 8. Electronic Contact Cleanser (1 Pc) 400ml Hd-390 Multipurpose Clear To Clean All Types Of Contact Point, Connectors And Sensitive Electronic Component 9. Printer Head Cleaning Solution, 100ml, With 1 Set Of Syringe With Hose (7 Bottles) 10. Thermal Paste 30 Grams (30 Pcs) 11. Multi-purpose Lubricant 11.2oz (4 Bottles) Description: - Drives Out Moisture - Protects Metal Surface - Frees Sticky Mechanism - Removes Grease, Grime, And Gunk - Lubricates

Details: The following components are to be delivered: 3 pieces Rodeom2cx single camera coaxpress recorder with 12g-sdi & 10gige interface, with M2 memory card slot, dimensions (w x hxl) 62 x 62 x 135 mm3 1 piece Rodeom2cx-vc2 single camera coaxpress recorder with 12g-sdi & 10gige interface, with M2 memory card slot, dimensions (w x hxl) 62 x 62 x 135 mm3 Incl. Studio Cap software license, 2 years support 4 pieces Rodeopwr IOI -universal power supply for Rodeocx 4 pieces Cabrodeoio TTL I/O cable for Rodeocx 4 pieces Vidiomod7680em2 IOI Vidio Drive module M.2 for Volucam, 7680gb high endurance version, 4 pieces Viclensmount-a IOI Active EF Mount adapter for Victorem CP, SDI and Volucam cameras 4 pieces Vicpwrio2 IOI 12 VDC universal power supply for Victorem CP cameras with Hirose for active EF mount control Please state individual prices. Delivery must take place in 2024.

Details: Amendment 1 - 10/18/2024 amendment 1 Issued 10/18/24 To Incorporate The Following: Responses To Questions; Revisions To Initial Synopsis/soliciaition Notice; Response Date Extension To 11/12/24, 4pm. The Amendment Is Provided As An Attachment To This Notice. synopsis/soliciaition Notice Updated 10/18/24 Per Amendment 1 Revisions: procurement Description through Its Design Excellence Program, The U.s. General Services Administration (gsa) Commissions Our Nation’s Most Talented Creative Professionals To Design Outstanding Federal Workplaces. These Projects Embody An Exemplary Integrated Process Whose Results Deliver Enduring Value To Taxpayers. Gsa Defines Quality As The Thoughtful Expression Of Artistry, Local Culture, And Democratic Values Like Civic Participation, Accessibility, And Transparency, Achieved In Balance With Affordability, Constructability, Reliability, And Industry-leading Sustainable Performance. Design Excellence Is The Means By Which Gsa Realizes The Guiding Principles For Federal Architecture, Which President Kennedy Authorized In 1962, And It Is One Of The Agency’s Primary Vehicles For Catalyzing Positive, Inclusive Change In Local Communities. continuing This Legacy Of World-class Public Architecture, Gsa Announces An Opportunity For Design Excellence For Projects In Occupied Federally Owned Or Leased Office Buildings, Courthouses, And Land Ports Of Entry (lpoe's) Throughout Region 9. These Projects Are To Demonstrate The Value Of True Integrated Design That Balances Aesthetics, Cost, Constructability, And Reliability; And Create Environmentally Responsible And Superior Workplaces For Civilian And Federal Employees. this Is A Multiple Award Indefinite Delivery Indefinite Quantity (idiq) Contract(s) For Architect Engineer (ae) Services Covering Projects Located In The Following Four (4) Geographic Zones Of Region 9: zone 1 - States Of Arizona And Nevada zone 2 - Northern California (california Counties Of Del Norte, Siskiyou, Modoc, Humboldt, Trinity, Shasta, Lassen, Mendocino, Tehama, Plumas, Glenn, Butte, Sierra, Lake, Colusa, Yuba, Nevada, Placer, Sonoma, Napa, Yolo, Sutter, El Dorado, Marin, Solano, Sacramento, Amador, Alpine,san Francisco, Contra Costa, San Joaquin, Calaveras, Toulumne, Mono, Inyo, San Mateo, Alameda, Stanislaus, Mariposa, Santa Cruz, Santa Clara, Merced, Madera, San Benito, Fresno, Monterey, Kings, Tulare) zone 3 - Southern California (california Counties Of San Diego, Imperial, Orange, Riverside, Santa Barbara, Ventura, Los Angeles, San Bernardino, San Luis Obispo, Kern) zone 4 - State Of Hawaii And Pacific Territories multiple Awards May Be Made As A Result Of This Announcement, And The Government Anticipates Making Between Three (3) To Six (6) Awards Per Geographic Zone. However, The Ultimate Number Of Contracts Per Zone Will Be Determined By Gsa After The Assessment Of Qualified Contractors During The Solicitation Stage To Ensure Coverage In All Zones. this Procurement Is A 100% Total Small Business Set Aside. Prime Ae Firms Must Be A Small Business In Order To Be Considered. Consultants To The Prime Ae Firms Are Not Required To Be Small Businesses. the Naics Code Is 541310 - Architectural Services; The Small Business Size Standard Is $12.5 Million (average Annual Receipts). prime Ae Firms Who Are Interested In Performing Work In Multiple Zones Must Submit A Separate Technical Qualification Package For Each Zone. The Prime Ae Firms Must Have An Active Main Office And/or Branch Office Located Within The Applicable Geographical Zone As Of The Date Proposals Are Due In Order To Be Considered; If An Award Is Issued, The Zonal Office Must Remain Open And Active For The Duration Of The Contract Period. Consultants To The Prime Ae Firm Are Not Required To Have An Active Office In The Geographical Zone The Prime Ae Firm Will Be Performing In. An Active Main Office And/or Branch Office Is Defined As A Non-temporary Office From Which Business Is Regularly Conducted By The Prime Ae Firm. Prime Ae Firms Will Be Required To Certify They Meet The Specified Local Office/ Geographic Limitations In Your Submission. at The Time Of Technical Qualification Package Submission, Interested Prime Ae Firms Must Have An Active Registration In The System For Award Management (sam). Active Registration Must Also Be Complete As Applicable If The Prime Ae Firm Is A Partnership, Corporation, Association, Joint Venture, Or Other Legal Entity. Prime Ae Firms Will Be Required To Provide A Copy Of Your Active Sam Record As Well As Any Executed Agreements If Applicable (such As An Executed Joint Venture Agreement) In Your Submission. the Awarded Contracts Will Be For A Period Of One (1) Base Year With Four (4) Consecutive One (1) Year Option Periods. the Minimum Guarantee Will Be $1,000 For The Base Year Period Only. the Total Aggregate Maximum Order Limitation (mol) Per Awarded Contract, Covering The Base Year Period And Four (4) Consecutive One (1) Year Option Periods, Shall Not Exceed $25 Million. task Orders Issued Under The Awarded Contracts May Range In Value From $10,000.00 To $4,000,000.00, However There Will Be No Single Task Order Minimum Or Maximum Limit Specified. Prime Ae Firms Will Be Required To Comply With Brooks Act Procedures And Applicable 6% Statutory Limitation. this Procurement Will Be Conducted In Accordance With Brooks Act Public Law 92-582, And As Implemented In Federal Acquisition Regulation (far) Part 36.6, General Services Administration Acquisition Manual/ Regulation (gsam/ Gsar) Part 536.6. Under This Process The Government Will Award To The Most Highly Qualified Prime Ae Firms With Whom It Can Negotiate A Fair And Reasonable Price. this Is A Request For Technical Qualifications Only; This Is Not A Request For Proposal. An Ae Evaluation Board Comprised Of Gsa Personnel Will Evaluate The Technical Qualification Packages. general Description Of Contract Services prime Ae Firms, And Consultants As Applicable, Are Required To Be Licensed/ Registered Within The Applicable State(s) For Each Geographic Zone They Are Interested In And Must Conform To All Laws, Rules, And Requirements Of That State Governing The Profession Of Architecture Or Engineering. the Services Required Under This Contract May Include, But Are Not Limited To, The Following: 1. Comprehensive Design Services Including The Preparation Of Construction Documents For Repair And Alteration, And Tenant Improvement Projects. Typical Projects May Include Repair, Improvement And/or Remodeling Of Building Interior Space, And Building Systems And Features, Including But Not Limited To: Interior And Exterior Finishes, Landscaping, Civil, Mechanical, Plumbing, Electrical, Structural, Fire Safety, Blast, Anti-ram, And Ballistic Protection, Elevators, Environmental, And Roofing Components/systems. Project Locations/ Spaces May Include Courthouse And Federal Facilities, Historic Buildings, Border Stations, Child Care Facilities, Lease Locations, Renovation And/or Alteration Of Fire Protection Systems, Administrative Facilities, Warehouses, Road And Parking Lots, Walkways, Plazas, And Other Existing Systems And Facilities. 2. Comprehensive Design Services Including The Preparation Of Construction Documents For New Construction Of Courthouses And Federal Facilities. 3. Preparation Of Designs, Plans, Specifications, Estimates, Record Drawings, Space Planning, Technical Studies And Reports, Surveys And Construction Inspection Services For Projects. Projects May Involve Work In Specialty Areas Such As Alterations In Historic Buildings Or Asbestos Abatement Work. 4. Professional Disciplines Required May Include Architectural Designer, Landscape Designer, Mechanical Engineer, Structural Engineer, Hvac Engineer, Electrical Engineer, Civil Engineer, Historic Preservation Architect, Acoustical Engineer, Blast Consultant, Interior Designer, Cost Estimator, Cad Operator, Building Information Management, Fire Safety, Security Systems Consultant, Asbestos, Acoustical, Seismic, Environmental Engineering, Energy Consultant, Telecommunication, Building Forensics, Waterproofing, And Geotechnical Engineering. These Professional Disciplines May Also Assist Gsa Staff Engaged In Scope Development, Shop Drawing Review, Master Planning, Feasibility Studies, Programming, Interior Design, Change Management, Design Review, Construction Administration And Inspection, Elevator Evaluation/design, Signage Design, And Various Technical Studies Including Building Engineering Reports, Workplace Engagement Studies, Program Of Requirements, Post Occupancy Analysis, , Historic Structure Reports, Determinations Of Eligibility, National Register Of Historic Places Nominations, Historic Building Preservation Plans, Seismic And Structural Evaluations, Energy Studies For Design Of Energy Upgrades, Roof Evaluations, Fire Safety Review/studies, And Handicapped Accessibility (abaas) Reviews. 5. Comprehensive Project Planning Services For Large New Construction And Major Renovation Projects, Including Surveys Of Existing Conditions And Field Investigations, Site Selection And Evaluation, Planning And Program Studies, Feasibility Studies, Cost Estimates, Inventory Of Existing Furniture, Fixtures, And Equipment, And Other Services. The Budget Assessments May Include Cost Analysis As Well As Cost Estimating. 6. Design Services May Include Green/sustainable Design With A Goal Of Leed Certification And Sites Certification For Select Projects. Other Sustainable Design Requirements May Apply, Such As The Use Of Recycled And Environmentally Responsible Materials, Achievement Of Energy And Water Efficiency Goals, Design For Indoor Environmental Quality, Sustainable Site Design, And Sustainable Urban Design. 7. Other Professional Services Of An Architectural Or Engineering Nature, Or Incidental Services, That Members Of The Ae Professions (and Individuals In Their Employ) May Logically Or Justifiably Perform, Including Studies, Investigations, Surveying And Mapping, Tests, Evaluations, Consultations, Comprehensive Planning, Program/project Management, Conceptual Designs, Plans And Specifications, Value Engineering, Construction Phase Services, Soils Engineering, Drawing Reviews, Architectural Photography, Preparation Of Operating And Maintenance Manuals, And Other Related Services. 8. Environmental Surveys, Reports, Studies, And Designs For The Clean-up, Removal, Monitoring And/or Abatement Of Asbestos, Hazardous/toxic Materials And Petroleum Products. 9. Spatial Data Management (sdm) Program For Creating, Updating And Maintaining Spatial Data And Associated Computer Aided Drawings (cad) To Accurately Reflect The Federal And Leased Inventory. prime Ae Firms Must Have The Ability To Provide Comprehensive Design And Post Construction Contract Services, Which May Include Rfi And Submittal Reviews. prime Ae Firms Must Be Able To Perform Drafting Of Above Work In A Computer System Compatible With The Latest Version Of Autocad And Building Information Modelling Software And Provide Construction Specifications Using The Latest Version Of Masterformat. The Prime Ae Firm Must Also Be Able To Provide Design In Both English And Metric, As Applicable. each Contract Awardee Must Have The Capability To Concurrently Perform Design And Engineering Work For At Least Five (5) Gsa Projects. in Performance Of The Contract, The Selected Prime Ae Firm May Be Required To Include On Its Team The Following Design Disciplines And Specialty Consultants: Architect, Electrical Engineer, Mechanical Engineer, Plumbing, Structural Engineer, Civil Engineer, Cost Estimating, Fire Protection Engineer, Interior Designer, Historic Preservation Architect, Landscape Architect, Vertical Transportation/ Elevator Consultant, Blast Consultant, Materials Conservation, Sustainability, And Hazardous Materials. selection Process the Selection Of Between Three (3) To Six (6) (or More) Single Award Ae Idiq Contracts Per Geographic Zone Will Be Made Using A Two-stage Process As Follows: stage I - The Technical Qualifications And Experience Of Proposed Prime Ae Firms Will Be Evaluated From The Initial Technical Qualification Package, Including Review Of Their Complete Team Of Engineers And Consultants. A Short-list Will Be Established Of The Prime Ae Firms Determined To Be The Most Highly Technically Qualified. The Short-listed Prime Ae Firms Will Be Invited To Continue With Stage Ii Of The Selection Process. stage Ii - Interviews Will Be Conducted With The Short-listed Prime Ae Firms. The Short-listed Prime Ae Firms Will Be Ranked, And The Top-ranked Firms Will Be Selected To Receive The Solicitation And Conduct Negotiations. stage 1 Submission Requirements prime Ae Firms That Fully Meet The Requirements Described In This Notice Are Invited To Submit A Technical Qualification Package To Include The Following, In The Order Listed: cover Letter Referencing The Sam.gov Announcement Number And Briefly Describing The Firm And Its Location, The Geographic Zone They Wish To Be Considered For, Organizational Makeup, Noteworthy Accomplishments, And The Proposed Working And Legal Relationship Between Its Components If The Prime Ae Firm Is A Partnership, Corporation, Association, Joint Venture, Or Other Legal Entity. acknowledgement Of All Amendments Posted Prior To The Closing Date. active Sam Record. executed Agreement(s), If Applicable. standard Form (sf) 330 Architect Engineer Qualifications Part I & Ii responses To The Submission Requirements And Evaluation Criteria Listed Below. prime Ae Firms Shall Submit Separate Complete Technical Qualification Packages For Each Geographic Zone The Firm Is Interested In Being Considered For. only Electronic Submissions In Pdf Format Will Be Accepted; No Hard Copies Will Be Accepted Or Reviewed. pdf Submissions Shall Be Concise And Organized, In 8 1/2" X 11" Format, And The Assembled Content Shall Not Exceed One Hundred And Twenty-five (125) Pages. All Assembled Pages In The Pdf Submissions Shall Be Continuously Numbered, Meaning The Cover Letter, Table Of Contents, Cover Pages, Etc. Are To Be Included In The Continuously Numbered Pages; There Are No Exclusions Allowed In The Specified Page Limitation. ensure The Submission Clearly Identifies The Information Being Submitted For Each Evaluation Factor, Either By Using Cover Pages For Each Evaluation Factor Content Or By Annotating At The Top Of Each Page Which Evaluation Factor(s) The Information Applies To. sf 330 Instructions: prime Ae Firms Are To Complete And Submit A Current Sf 330 Part I & Ii. All Sections Of The Sf330 Must Be Filled Out In Their Entirety And Must Address All Elements Identified Under The Stage 1 Evaluation Criteria. interested Firms With More Than One (1) Office Must Indicate On Their Sf 330 The Staffing Composition Of The Office In Which The Work Will Be Performed Under The Specified Geographic Zone. Include A Completed Part Ii Only For Each Proposed Consultant/ Subcontractor Listed In Part I - Section C. in Addition To The Standard Instructions Provided On The Sf 330, The Following Are Supplemental Instructions For Sf 330 Part I Sections Under This Announcement: section C: The Prime Ae Firm Should Prioritize Team Members And Only Provide Those That Are Essential To Creating The Most Well-rounded Team. section E: The Prime Ae Firm Should Prioritize And Provide Those That Best Represent The Firm's Ability To Accomplish The Requirements Of This Contract. Ceos And Other Executive Personnel Should Not Be Submitted Unless They Will Have Direct Responsibility For Accomplishing The Task Orders Under This Contract. It Is Required That The Lead Architectural Designer And The Primary Point Of Contact That Would Be Responsible For Managing This Contract And Assigning Task Orders Be Included. It Is Recommended That The Key Personnel Directly Responsible For Work Submitted In Section F Should Also Be Included. section F: All Projects Provided Should Be Designed And Completed Within The Last Ten (10) Years; "designed And Completed" Means The Design Work And Associated Construction Work For A Submitted Project Are Both To Have Been Completed In The Last Ten (10) Years. The Prime Ae Firm May Submit The Same Projects For Multiple Evaluation Factors If They Address The Specified Information Required For Each. Ensure Each Project Specifically Notes Which Factor It Is Being Submitted For. Ensure That An Accessible Owner Point Of Contact Including Name, Title, Address, Current Email Address And Current Phone Number Is Provided. section G: Indicate Key Personnel And Consultant/ Subcontractors Who Participated In The Example Projects Under Section F. section H: Certification Is Required By The Prime Ae Firm That They Have An Active Main Office And/or Branch Office Located Within The Applicable Geographic Area They Wish To Be Considered; The Last Entry Under This Section Must Read "i Hereby Certify That The Prime Ae Firm Listed In Section C Meet(s) The Geographic Limitations Stated In The Synopsis For This Contract". stage 1 Evaluation Criteria the Evaluation Criteria And Associated Relative "weight" For Each Criteria Element Is As Follows: 1. Specialized Experience (35%) 2. Professional Qualifications And Experience Of Key Personnel (25%) 3. Past Performance (20%) 4. Project Management And Quality Control Plan (10%) 5. Geographic Location (5%) 6. Small Business Socio-economic Categories (5%) the Evaluation Criteria And Submission Requirements For Each Are Further Described Below: 1. Evaluation Factor No. 1: Specialized Experience (35%) this Factor Considers The Prime Ae Firm’s Specialized Experience For Projects That Meet The Submittal Requirements Project Definition For This Factor. The Prime Ae Firm Shall Provide Their Most Relevant Experience In Response To Gsa’s “requirements Under The Contract” Description And Demonstrate Success In Appropriately Addressing Complex Design, Research, Innovation, And Strategy Issues Such As Unique Requirements, Significance Of Community Or Cultural Context On Building Or Interior Design, Image, Function, Scale, Scope, Complexity, And Experience Or Perception Of Users. The Prime Ae Firm Shall Demonstrate Innovation In Design, Research, Construction And Project Management Approaches Using Integrated Multidisciplinary Teams On A Range Of Projects Including But Not Limited To Innovative Building Design Solutions, Strategic Endeavors, And Efforts To Achieve Sustainable Solutions. The Prime Ae Firm Shall Also Demonstrate Experience Providing Services Ranging From Pre-design Studies Through Construction Administration; Highlight Areas Of Concentration Or Competence And Range Of Expertise In Diverse Areas Such As Workplace Strategy, Change Management And/or Historic Preservation; Highlight Achievements In Resolution Of Technical Issues Such As Abaas Improvements, Security Design And Energy Projects. the Standard For This Factor Is Met When: the Prime Ae Firm Demonstrates Success In Addressing Complex Design And/or Challenges Through Evidence Of Experience Addressing The Elements Above. additional Consideration Under This Factor: more Weight May Be Given For Firms Who Submit Projects Reflecting Any Of The Following- (1) Experience With Projects Owned By Public Agencies, Including But Not Limited To Federal, State, And Municipal Agencies. (2) Awards Or Other Forms Of Public Recognition From Nationally Recognized Organizations Demonstrating Excellence In Design. submittal Requirements For Factor 1: the Prime Ae Firm Must Submit Three (3) Projects Total For This Factor, No More And No Less. For Each Project, Submit A Maximum Three (3) Page Narrative, Including Any Photographs And Drawings, That Illustrate Specialized Experience Of Projects Where The Construction Was Completed Within The Last Ten (10) Years, And Each Having A Construction Value Of $1 Million Or More. Projects Submitted May Be For Both Renovations And New Construction. 2. Evaluation Factor No. 2: Professional Qualifications And Experience Of Key Personnel (25%) this Factor Considers The Prime Ae Firm’s Professional Qualifications, Experience Of Key Personnel, And Design Philosophy. The Prime Ae Firm Shall Demonstrate Professional Qualifications And Experience Of The Proposed Key Personnel Assigned To This Project Necessary For Satisfactory Performance Of The Required Services. Qualifications And Experience Of The Prime Ae Firm’s Key Personnel Will Be Reviewed First; Then The Overall Proposed Team Qualifications And Experience Will Be Reviewed To Ensure They Will Provide Necessary Support To The Prime Ae Firm To Perform The Required Services. The Prime Ae Firm Shall Also Address The Principal Or Lead Designer’s Philosophy To Include Past Work That Exhibits A Balance Of Design Quality With Other Factors That Affect Public Architecture Including Security, Review Processes, And Budget And Schedule. the Standard For This Factor Is Met When: the Prime Ae Firm Submits All Required Information Demonstrating The Qualifications, Experience, And Design Philosophy As Described. additional Consideration Under This Factor: more Weight May Be Given For Firms Who Submit Information Addressing Any Of The Following - (1) The Degree To Which Any Of The Key Personnel’s Qualifications Are Superior (2) History Of Leadership In Volunteer Organizations Related To The Field Of Architecture, Engineering, And Construction. (3) Awards Or Other Forms Of Public Recognition From Nationally Recognized Organizations Demonstrating Excellence In Design. (4) A Design Philosophy That Provides Evidence Of Flexibility, Innovation, Balance, And Awareness Of Design Excellence In Public Architecture. submittal Requirements For Factor 2: the Prime Ae Firm Shall Provide A Narrative Description, Not To Exceed Two (2) Pages, Summarizing The Principal Or Lead Designer’s Philosophy And Approach To Project Solutions And Providing Examples. Information Provided May Include Appropriate Graphic Material. the Prime Ae Firm Must Submit Resumes Of Proposed Team Members, Not To Exceed Two (2) Pages Each, For Personnel In The Following Disciplines: (1) Prime Architect (one Individual Can Fulfill More Than One Role) principal (architect Of Record) lead Designer project Manager (individual Responsible For Task Orders) (2) Consultants Of Record civil Engineer structural Engineer mechanical Engineer electrical Engineer plumbing Engineer fire Protection Engineer historic Preservation Architect interior Designer landscape Architect resumes Must Indicate Professional Qualification Of Team Members, Including Education, Professional Certification And Licensure, Relevant Experience, Any Specialized Expertise, And The Length Of Service With The Firm. Include And Clearly Identify Resumes For Individuals Who Will Serve As Principal/architect Of Record, Lead Designer, And Project Manager(s), As Well As The Lead Designers In Each Discipline (whether They Are A Part Of The Prime Ae Firm Or A Sub-consultant). resumes Submitted Must Demonstrate Familiarity With New Construction And/or Renovation Projects In Occupied Buildings Where The Construction Was Completed Within The Last Ten (10) Years, And Each Having A Construction Value Of $1 Million Or More. 3. Evaluation Factor No. 3: Past Performance (20%) this Factor Considers The Prime Ae Firm Past Performance On A Range Of Projects Of Varying Scopes, Scales, And Complexities. The Prime Ae Firm’s Role On Each Project Submitted Must Be Identified, Including Demonstrated Success At Collaborative Relationships With Consultants If Applicable. in Evaluating Past Performance For Projects That Meet The Submittal Requirements Project Definition For This Factor, The Government May Review The Contractor Performance Assessment Reporting System (cpars) Database And/or Past Performance Questionnaires (ppq) Submitted By The Prime Ae Firm. Points Of Contact Provided For Projects Submitted Under This Factor And Other Factors May Be Contacted, And The Government May Also Review Any Other Source Of Past Performance Information At Its Discretion. Evaluation Of Past Performance Is A Subjective Assessment Based On Consideration Of All Relevant Facts And Circumstances. It Will Not Be Based On Absolute Standards Of Acceptable Performance. In The Case Of An Offeror Without A Record Of Past Performance, Or For Whom Information On Past Performance Is Not Available, That Offeror Will Be Given Neither A Favorable Nor An Unfavorable Evaluation Regarding Past Performance. the Standard For This Factor Is Met When: the Prime Ae Firm’s Overall Past Performance Record Demonstrates Satisfactory Performance On Three (3) Projects That Meet The Submittal Requirements Project Definition For This Factor. submittal Requirements For Factor 3: the Prime Ae Firm Must Submit Three (3) Projects Total For This Factor, No More And No Less. For Each Project, Submit A Maximum Three (3) Page Narrative, Including Any Photographs And Drawings, Where The Construction Was Completed Within The Last Ten (10) Years, And Each Having A Construction Value Of $1 Million Or More. Include Tangible Evidence Such As Certificates, Awards, Peer Recognition, Etc., Demonstrating Design Performance. Projects Submitted May Be For Both Renovations And New Construction. Each Project Specified Is To Clearly Identify The Project Name, Design Contract Number (if Applicable), Location Of Work, Design Contract Value, Construction Value, And Accurate Client Reference Information Including Name, Title, Address, Email, And Phone Number. Points Of Contact Provided For Projects Submitted Under Other Evaluation Criteria May Be Contacted. additionally, The Prime Ae Firm Must Submit A Ppq Or Copy Of The Completed Cpars Evaluation For Each Of The Three (3) Projects Submitted Under This Factor. The Ppq Or Cpars Evaluation Pages Are In Addition To The Three (3) Page Maximum Narrative Specified For Each Project. 4. Evaluation Factor 4: Project Management And Quality Control Plan (10%) this Factor Evaluates The Prime Ae Firm’s Project Management And Quality Control Plan, Which Provides A Plan Specific To This Idiq Contract. At A Minimum, The Submitted Plan Must Clearly Identify Key Roles And Lines Of Communication, And Must Explain Steps To Ensure Cost And Schedule Control, Quality Control, Project Team Capacity, And Requirements For All Review Stages And Submittals. the Project Management And Quality Control Plan Must Also Demonstrate The Capacity Of The Prime Ae Firm To Accomplish Multiple, Large And Small Projects Simultaneously, And The Ability To Sustain The Loss Of Key Personnel While Accomplishing The Work Within The Required Time Limits. Under The Anticipated Idiq Contract, Each Contract Awardee Must Have The Capability To Concurrently Perform Design And Engineering Work For At Least Five (5) Gsa Projects/ Task Orders. the Standard For This Factor Is Met When: the Prime Ae Firm Demonstrates The Following - the Methods To Deliver Quality Design Or Deliverable While Maintaining Cost And Schedule Controls. the Capability To Respond To The Government’s Needs In A Timely Manner. the Capability To Perform And Balance Multiple Task Orders Concurrently And To Balance Competing Needs Of Multiple Customers. their Ability, Methods, And Processes To Adequately Staff Project Teams. submittal Requirements For Factor 4: the Prime Ae Firm Shall Submit A Project Management And Quality Control Plan, Six (6) Pages Maximum, That Demonstrates The Firm’s Approach For Delivering Individual Projects And Addresses How The Plan Will Be Catered To The Anticipated Idiq Contract, As Described Above. 5. Evaluation Factor 5: Geographic Location (5%) this Factor Evaluates The Prime Ae Firm’s Knowledge Of Local Conditions Within The Geographical Zone(s) In Which They Wish To Be Considered For Contract Award Including Design And Project Strategies Used For Solutions To Design Issues Specific To Local, Environmental, And Geographic Areas Within A Zone. This Must Include Project Delivery Processes, Construction Methodologies, And Related Involvement Or To The Consultants. This Factor Also Considers The Prime Ae Firm’s Familiarity Of The Applicable Geographic Area’s Architectural Standards And Codes, Building Codes, Environmental Regulations, Soil Conditions, Seismic Requirements, And Agency Regulations. the Standard For This Factor Is Met When: the Prime Ae Firm Clearly Demonstrates Knowledge Of Local Conditions And Familiarity With Applicable Geographic Areas Standards And Codes, As Described Above. submittal Requirements For Factor 5: the Prime Ae Firm Must Submit Three (3) Projects Total For This Factor, No More And No Less, And Must Provide A Maximum Of Three (3) Page Narrative For Each Project, Including Any Photographs And Drawings As Applicable, For A Total Of Three (3) Projects Where The Construction Was Completed Within The Last Ten (10) Years, And Each Having A Construction Value Of $1 Million Or More, Describing The Prime Ae Firm’s Knowledge Of Locality Criteria Described Above. Projects Submitted May Be For Both Renovations And New Construction. 6. Evaluation Factor No. 6: Small Business Socio Economic Categories: Hubzone, Sdvosb, Wosb (5%) this Factor Considers The Prime Ae Firms Status As A Small Business Concern In The Following Socio-economic Categories: Historically Underutilized Business Zone (hubzone) Small Business Concern; Service-disabled Veteran Owned Small Business (sdvosb) Concern; Women-owned Small Business (wosb) Concern. including This Factor In The Evaluation Of The Prime Ae Firm Will Result In A Higher Evaluation Rating Being Given To Firms Who Fall Within One Of The Specified Socio-economic Categories. the Standard For This Factor Is Met When: the Prime Ae Firm Provides Confirmation Of Their Small Business Socio-economic Status Within One Or More Of The Specified Categories, If Applicable. submittal Requirements For Factor 6: the Prime Ae Firm Must Submit Proof Of Current Sba Certification Within The Socio-economic Category Specified. stage Ii Process Summary the Names Of The Short-listed Prime Ae Firms Who Will Be Invited To Participate In Stage Ii Of The Selection Process Will Be Published On Sam.gov. This Publication Will Be The Only Notice For Prime Ae Firms Who Submit Stage I Technical Qualification Packages And Are Not Short-listed Will Receive. Short-listed Prime Ae Firms Will Be Provided More Detailed Information On The Stage Ii Process. prime Ae Firms Slated For Interviews Will Be Asked To Present Information On The Evaluation Factors. The Primary Presenter Must Be The Proposed Project Manager/ Lead Project Architect, With Assistance From Up To Two (2) Additional Team Members As Necessary. Interviews Will Be Conducted Via Google Meet. following The Technical Review And Interview Process The Final Selected Prime Ae Firms Will Be Requested To Provide Pricing To Include Overhead Rates, Profit Rates And Hourly Rates For The Anticipated Disciplines For Use In Negotiating Fixed Price Task Orders. notice To Prime Ae Firms prime Ae Firms Submitting Qualification Packages Under This Notice Must Be A Small Business Firm With A Main Office And/or Branch Office In Each Of The Geographic Zone(s) They Are Interested In Being Considered For. Additionally, Failure To Address Each Of The Evaluation Factors And Provide The Requested Information May Result In Failure To Qualify. it Is The Prime Ae Firms Responsibility To Monitor Sam.gov For Any Changes To This Announcement. questions: the Deadline For Submitting Questions Is October 4, 2024, 4:00 Pm Pt. Questions Must Be Submitted In Writing Via Email To Heather Caney, Contracting Officer At Heather.caney@gsa.gov. Questions Received After The Date Specified Will Not Be Accepted Or Responded To. An Amendment Will Be Issued To Provide Responses To All Questions Received By The Deadline. all Questions Received In Writing By The Closing Date And Time Have Been Responded To Under Amendment 1. No Additional Questions Will Be Accepted Or Responded To. closing Date And Time: prime Ae Firms Which Possess The Qualifications To Perform The Services Described In This Notice Are Invited To Submit Their Complete Technical Qualification Package No Later Than November 12, 2024, 4pm Pt. The Email Submission Must Clearly Identify The Synopsis/solicitation Number And The Applicable Geographic Zone For Which The Prime Ae Firm Is To Be Considered. For Prime Ae Firms Submitting For Multiple Zones, Send A Separate Email For Each Zone. all Submissions Shall Be Sent Via Email To Heather Caney, Contracting Officer At Heather.caney@gsa.gov. only Electronic Pdf Submissions Will Be Considered. No Late Submissions Will Be Accepted. it Is The Prime Ae Firm’s Responsibility To Ensure Technical Qualification Packages Are Complete And Submitted Early Enough To Be Received By The Contracting Officer Before The Deadline, And To Confirm Receipt Before The Deadline. Technical Qualification Packages Which Are Received By The Contracting Officer Later Than The Time Noted Will Be Rejected And Will Not Be Considered. the Maximum File Size For Email Submissions Is 25 Mb. Gsa Has Occasionally Experienced Delays In Delivery Of Emails From The Gsa Server To An Email Account. Therefore, Prime Ae Firms Need To Plan Accordingly. list Of Attachments: the Following Are A List Of Attachments Provided With This Notice: 1. Ppq (word) 2. Sf330 Part 1 & 2 With Form Instructions (pdf) 3. Sf330 - Part 1 (pdf) 4. Sf330 - Part 2 (pdf) 5. Sf330 - Extra Section C (pdf) 6. Sf330 - Extra Section E (pdf) 7. Sf330 - Extra Section G (pdf) 8. Sf330 - Extra Section H (pdf) 9. Amendment 1 - 10/18/2024 (pdf)

Details: The subject of the performance of this order is the delivery of the performance expected in the framework of the planned subsidy project "development of a standardized nanostructured substrate and an analytical system for routine analysis by surface-enhanced Raman spectroscopy" Registration Number Cz.01.01.01/01/22_002/0000650. The subject of the Public Contract is the Complex Supply of Services United with the Development of the Control System of the Optical and Electronic Subsystems of the Prototype Laser Stereo-lithographic System Working on the Principle of Two Photon Polymerization (slw-2pp). The Public Order includes the supply of services including, in particular, the work of programming the controller SW/firmware based on the requirements described in the technical specification of the order, testing and implementation on the lithographic device. Technical Specification of the Subject of the Contract: A. Modifications and Upgrades of the Control Sw and Fw for the Purpose of Increasing the Production Speed of Existing Lithographic Devices I. Implementation of the Mode of Vector Writing of Structures During the Xy Table Movement With the Possibility of Entering a General Trajectory, for example From a 3d Slicer. II. Design And Implementation Of A Method For Entering Data Bases Using Mathematical Precepts With The Possibility Of Saving These Templates In Libraries For Future Use. III. Sw/fw Solution Options Variable Voxel Size Changes. E.g. Voxel Expansion Using Fast Deflection Unit In Areas With Absence Of Significant Details To Increase Write Speed Iv. Control And Synchronization Of The Deflection Unit (acousto-optic Modulators And Deflectors (aom, Aod). V. Realization Of The Possibility Of Writing A Fill Motif In The Areas Defined By The Mask. Vi. Control Of The Digital Camera Including Image Processing Functions For Autofocus. Vii. Control And Optimization Of The Data And Control Flow Between The Computer Station And Control Cards. Synchronization of the Exposure Process with the Movement of the Piezoelectric Nanopositioning System for the Purpose of Minimizing the Loss of Time During Changes from the Coordinate. X. Optimizing the Communication Between the Control Computer and the Exposure Unit Controlling the Individual Subsystems of the Lithographic Device. B. Modifications and Upgrades of Control Sw and Fw for the Purpose of Increasing the Recording Quality of Existing Lithographic Devices I. Implementation and Testing of Deflection Field Calibration Methods Using Various Tools (Photodiode, Camera, Etc.) Ii Field B. Software Modularization Allowing Simple Addition Or Removal Of Modules (Table Control Module, Aod Control Module, Etc.) C. Creating Dll Api Libraries Of Controlling Sw So That It Is Possible To Call It In An Independent Gui. D. Creation of C++ / Python Interface APIs Including Implementation of Current Vector Mode C-Script Functions in Python. E. Ensuring the Optimization of the Control Sw Based on the Changes of All Extensions and the Above-mentioned Modifications of the Existing System. F. Ensuring Technical and Software Support for the Proper Operation of Systems on which Work is Performed by the Contractor, During the Term of the Contract. The order is not divided into parts. The contracting authority does not intend to discuss offers with the participants within the meaning of Art. 5.4 of the Rules.