Scanning Tenders

Details: Responses Must Be Received No Later Than Wednesday, July 24, At 10:00am Est. this Request For Information (rfi) Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. the Submission Of Pricing, Capabilities For Planning Purposes, And Other Market Information Is Highly Encouraged And Allowed Under This Rfi In Accordance With (iaw) Far 15.201(e). disclaimer: This Rfi Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked As Proprietary Will Be Handled Accordingly. Iaw Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi. sources Sought Description this Is Not A Solicitation Announcement. This Is A Sources Sought/rfi Only. The Purpose Of This Sources Sought/rfi Is To Gain Knowledge Of Potential Qualified Sources And Their Size Classification Relative To Naics 339113. Responses To This Sources Sought Will Be Used By The Government To Make Appropriate Acquisition Decisions. After Review Of The Responses To This Sources Sought, A Solicitation Announcement May Be Published. Responses To This Sources Sought Synopsis Are Not Considered Adequate Responses For A Solicitation Announcement. the Department Of Veterans Affairs (va), Visn 5 Network Contracting Office, Is Seeking Sources That Can Provide Endoscope Cabinets For The Washington Dc Va Medical Center. item Information item Number description Of Supplies/services quantity unit unit Price amount 0001 2.00 ea __________________ __________________ reliance Endoscope Drying And Storage Cabinets 20 Scopes 0002 2.00 ea __________________ __________________ reliance Endoscope Drying And Storage Cabinets, Stainless Steel 20 Scopes Add-on 0003 2.00 ea __________________ __________________ reliance Endoscope Drying And Storage Cabinets, Stainless Steel 20 Scopes Add-on 0004 1.00 ea __________________ __________________ maintenance Manual Endoscope 0005 1.00 ea __________________ __________________ installation Reliance 6000 Cabinet 0006 1.00 ea __________________ __________________ total Care Connect Reliance 6000 Cabinet 0007 1.00 yr __________________ __________________ 1 Year Preventative Care 6000 Endo Cabinet grand Total __________________ statement Of Work (sow) scope Of Work. The Procurement Is To Provide Brand Name Or Equal Six (6) Reliance Endoscope Cabinets To The Washington Dc Va Medical Center. The Procurement Shall Include All Parts, Materials, Labor, Software/licenses, Resources, And Training Required To Implement And Utilize The Equipment/system To Their Fullest Capacity. All Items Must Be Covered By Manufacturer S Warranty And Procured Through A Manufacturer-approved Distribution Channel. Distributers And Resellers Must Be Able To Document Ability To Provide Items Through Manufacturer-approved Distribution Channels Upon Request. specifications. 2.1 Equipment line Item Description quantity reliance Endoscope Drying And Storage Cabinets, 20 Scopes 2 reliance Endoscope Drying And Storage Cabinets, Stainless Steel, 20 Scopes Add-on 2 reliance Endoscope Drying And Storage Cabinets,16 Scopes 2 installation Reliance 6000 Cabinet 4 total Care Connect Reliance 6000 Cabinet 4 1 Year Preventative Care 6000 Endo Cabinet 4 maintenance Manual Endoscope 1 2.2 Required Features hepa-filtered Cabinet, With Independent Airflow Pathways Distribute Air To The Outer Surfaces Of The Endoscope And Through Its Internal Channels To Assist Drying. four Cabinets With Operating Weight Of At Least 20 Scope Main Cabinet: 393 Kg (866 Lb) two Cabinets With Operating Weight Of At Least 16-scope hinge Doors And Retractable Endoscope Storage Panel With Door Lock Functionality electrical Requirement Of 120 Vâ±10%, 1-phase, 60 Hz, 10 Amp internal Lightning must Be Compatible With Endoscope Inventory At The Washington Dc Vamc. specific Tasks. 3.1 Delivery. all Equipment Shall Be Delivered To: washington Dc Va Medical Center 50 Irving St Nw washington, Dc 20422 attn: Vhawas Equipment Committee 3.2 On Site Procedures. covid-19 Screening: All Persons Entering The Facility Shall Be Subject To Screening For Covid-19 Per The Current Cdc (center For Disease Control) Guidelines. mask Requirement: All Contractors Shall Wear Masks While Indoors. contract Personnel Are Required To Identify Themselves As Such To Avoid Creating An Impression In The Minds Of Members Of The Public That They Are Government Officials. time Spent On Site Shall Be For A Period Sufficient To Complete The Work Set Forth In The Statement Of Work. on Site Visits Shall Be Scheduled In Advance With The Designated On-site Poc. contractor Shall Check In And Out With Biomedical Engineering Prior To Visiting The Worksite For Each Day Of Work. the Va Campus Is Non-smoking. Contractor Personnel Are Required To Comply With This Policy. parking: It Is The Responsibility Of The Contractor To Park In The Appropriate Designated Parking Areas. contractor Personnel S Tool Bags Are Subject To Inspection. 3.3 Installation/implementation. installation/implementation Will Be Completed By Personnel Certified And Knowledgeable With The Designated Equipment/system. installation Shall Be Completed Within The Period Of Performance. contractor Shall Be Responsible For Any Personal Protection Equipment (ppe) Required When Performing Work On Site. contractor Shall Submit All Removable Media To Be Used On A Va System To Biomedical Engineering For Scanning With Anti-virus Software Prior To Use. in The Case Turn-in, Exchange, Repair, Or Replacement Of Equipment Containing Hard Drives Used By The Va, The Hard Drives Shall Be Removed From The Equipment And Remain In Possession Of The Va (this Includes Loaned Or Rented Equipment). the Contractor Shall Take All Necessary Precautions To Prevent Damage To Any Government Property. The Contractor Shall Report Any Damages Immediately And Shall Be Assessed Current Replacement Costs For Property Damaged By The Contractor, Unless Corrective Action Is Taken. Any Damaged Material (i.e., Trees, Shrubs, Lawn/turf, Curbs, Gutters, Sidewalks, Etc.) Will Be Replaced In A Timely Manner Or Corrected By The Contractor With Like Materials, At No Extra Cost To The Government, Upon Approval Of The Contracting Officer. 3.4 Training. contractor Shall Be Responsible For Providing Training To Clinical Staff/users. training Is To Be Scheduled In Advance With The Designated On-site Poc. education Shall Be Provided Prior To And/or At Time Of Installation. education Professional Shall Be Certified To Provide Instruction On The Designated Equipment/system. education Curriculum Must Include: Operations And Set-up, User Maintenance, Safety, And User Troubleshooting Tips. 3.5 Inspection And Acceptance. contractor Shall Conduct A Joint Inspection With The On-site Poc Upon Completion Of Installation. in The Event Deficiencies Are Identified, The Contractor Shall Provide The Date When The Identified Deficiencies Will Be Addressed If Not Addressed On The Date Of Installation. The Contractor Shall Conduct A Joint Inspection With The On-site Poc After Addressing All Deficiencies. All Deficiencies Identified In The Joint Inspections Shall Be Corrected By The Contractor Prior To Government Acceptance Of The Item. Any Disputes Shall Be Resolved By The Contracting Officer. 3.6 Deliverables. the Contractor Shall Provide The Below Documentation For The Proposed Equipment To Vhawasequipmentrequests@va.gov Within 10 Business Days Of Work Completion: service Report. warranty Information. electronic Copy Of The Operators Manual. electronic Copies Of The Complete Technical Service Manuals, Including Troubleshooting Guides, Necessary Diagnostic Software And Equipment Information, Schematic Diagrams, And Parts Lists. hours Of Operation. dc Vamc S Normal Business Hours Are Monday-friday, 8:00 Am To 4:30 Pm, Excluding Observed Federal Holidays: new Year S Day labor Day martin Luther King S Birthday columbus Day president S Day veteran S Day memorial Day thanksgiving Day juneteenth christmas Day independence Day any Other National Holiday As Declared By The President Of The United States period Of Performance. Delivery Within 90 Days From Contract Award. the Information Identified Above Is Intended To Be Descriptive, Not Restrictive And To Indicate The Quality Of The Supplies/services That Will Be Satisfactory. It Is The Responsibility Of The Interested Source To Demonstrate To The Government That The Interested Parties Can Provide The Supplies/services That Fulfill The Required Specifications. If You Are Interested And Are Capable Of Providing The Sought-out Supplies/services, Please Provide The Requested Information As Well As The Information Indicated Below. if You Are Interested And Are Capable Of Providing The Sought-out Supplies/services, Please Provide The Requested Information As Well As The Information Indicated Below. Response To This Notice Should Include Company Name, Address, Point Of Contact, Size Of Business Pursuant To The Following Questions: (1) Please Indicate The Size Status And Representations Of Your Business, Such As But Not Limited To: Service-disabled Veteran Owned Small Business (sdvosb), Veteran Owned Small Business (vosb), Hubzone, Woman Owned Small Business (wosb), Large Business, Etc. (2) Is Your Company Considered Small Under The Naics Code Identified Under This Rfi? (3) Are You The Manufacturer Or Distributor Of The Items Being Referenced Above (or Equivalent Product/solution)? What Is The Manufacturing Country Of Origin Of These Items? (4) If You Are A Small Business And You Are An Authorized Distributor/reseller For The Items Identified Above (or Equivalent Product/solution), Do You Alter; Assemble; Modify; The Items Requested In Any Way? If You Do, State How And What Is Altered; Assembled; Modified? (5) Does Your Company Have An Fss Contract With Gsa Or The Nac Or Are You A Contract Holder With Nasa Sewp Or Any Other Federal Contract? If So, Please Provide The Contract Type And Number. (6) If You Are An Fss Gsa/nac Or Nasa Sewp Contract Holder Or Other Federal Contract Holder, Are The Referenced Items/solutions Available On Your Schedule/contract? (7) Please Provide General Pricing For Your Products/solutions For Market Research Purposes. (8) Please Submit Your Capabilities In Regard To The Salient Characteristics Being Provided And Any Information Pertaining To Equal To Items To Establish Capabilities For Planning Purposes? *** Submissions Addressing Section (8) Should Show Clear, Compelling, And Convincing*** Evidence That All Equal To Items" Meet All Required Salient Characteristics. responses To This Notice Shall Be Submitted Via Email To Michael.jones16@va.gov. Telephone Responses Shall Not Be Accepted. Responses Must Be Received No Later Than Wednesday, July 24, 2024, At 10:00am Est. If A Solicitation Is Issued It Shall Be Announced At A Later Date, And All Interested Parties Must Respond To That Solicitation Announcement Separately From The Responses To This Request For Information. Responses To This Notice Are Not A Request To Be Added To A Prospective Bidders List Or To Receive A Copy Of The Solicitation.

Details: Description Request For Quotation 1. The Bangko Sentral Ng Pilipinas Requests The Submission Of Quotations/proposals For The Following Requirement/s: Name Of The Requirement/brief Description : Supply, Delivery And Installation Of Main Disconnect Circuit Breaker Complete With Power Meter And Current Transformer At Bsp Bacolod Branch, As Per Bsp Terms Of Reference, Terms And Conditions And Annexes Approved Budget For The Contract (abc) : Php500,000.00, Inclusive Of All Applicable Taxes And Other Charges (quotations/proposals Exceeding This Amount Shall Be Disqualified.) Contract Duration/completion Time : The Project Shall Be Completed Within Sixty (60) Calendar Days Reckoned From The Date Stipulated In The Ntp To Be Issued By Facilities Management And Engineering Department (fmed). Reference : Bac-ho Gs No. 2024-0162 Dated 28 December 2023 Alternative Method Of Procurement : Negotiated Procurement – Small Value Procurement 2. All Particulars And Activities Relative To Eligibility Of Suppliers, Evaluation Of Quotations/proposals, Validation, And Award Of Contract Shall Be Governed By 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Revised Irr). Activity Schedule Details A. Issuance Of Rfq Starting 13 February 2024 In Support Of The Sustainable Banking Program Of The Bsp, Hard Copies Are No Longer Issued. B. Site Inspection Monday To Friday 8:00 A.m. - 5:00 P.m. Before Deadline Of Submission Of Quotations/proposals Engr. Aljon Rufino V. Cado Bsp Head Office Tel. Nos.: 8708-7701 Local 3532 Cell No.: 0917-54970871 C. Deadline Of Submission Of Quotations/ Proposals 16 February 2024; 12:00 N.n. Late Bids Shall Not Be Accepted. • Online Or Electronic Submission To The Following E-mails: A. Prmdi-dpc@bsp.gov.ph B. Guevarrarv@bsp.gov.ph Or • Physical Submission Of Hard Copy At Designated Bid Box For Delegated Procurement Located At Gate 3 Reception Lobby, Bangko Sentral Ng Pilipinas, A. Mabini Corner P. Ocampo Sr. Sts., Malate, Manila How To Submit Quotation/proposal For Manual Submission: 1. Supplier’s Representative Or Courier Service Provider Shall Fill-up The Bid Submission Form (bsf) Available At The Gate 3 Reception Lobby. 2. Insert The Bsf (front Portion Facing Up) In The Time Stamp Machine Twice To Indicate The Time Of Submission Of The Quotation/proposal In The Bsf 3. Drop The Quotation/ Proposal In The Bid Box. As Precautionary Measure, Participating Suppliers Are Instructed To: 1. Wrap/enclose Bidding Documents With Plastic, Preferably Clear To Facilitate Disinfection/sanitation; 2. Submit Documents At Least Thirty (30) Minutes Before The Scheduled Deadline Of Submission To Allow Time For Possible Queuing Due To Conduct Of Thermal Scanning, And For Sanitation Of The Bid Envelope(s) And Transit Of The Documents To The Procurement Management Department Office. For Electronic Submission: 1. Save, Copy Or Transfer All Electronic Documents In Separate Compressed/zipped Folders 2. Zipped Electronic Bid Folders To Be Submitted Can Be Opened Using The 7-zip Compression Tool 3. The Subject Matter Of The E-mail Shall State The Short Title Of The Requirement To Be Procured As Stated In The Procurement Opportunity, Name Of Bidder (all Caps) And The Folder And Batch Number Of The Documents Sent 4. To Avoid The Tampering Or Alteration Of Electronic Documents, Files Shall Be Sent As Attachment/s To The E-mail And Not Through A File Sharing Link. The Bsp System Can Accommodate Attachments With File Size Limit Of Up To 100mb. If The Bidder’s E-mail Has A Smaller File Size Limit (e.g., In Case Of Free Mails, Such As Gmail And Yahoomail), It May Send Files In Batches All Written Requests/queries: Procurement Management Department I Room 212, 2nd Floor, 5-storey Building Bangko Sentral Ng Pilipinas A. Mabini Corner P. Ocampo Sr. Streets, Malate, Manila Fax No.: (+632) 8708-7115 E-mail: Prmdi-dpc@bsp.gov.ph Note: All Requests Shall Be In Writing And Addressed To The Director, Procurement Management Department I. 3. Submit The Properly Filled Up Quotation/proposal On Or Before The Deadline Set Above (use Bsp-prescribed Form). Suppliers Can Modify Or Withdraw Their Quotations/proposals At Any Time Before The Deadline For The Submission And Receipt Thereof; Provided, That They Send Another Quotation/proposal, Which Is Labelled As A “modification” Of The One Previously Submitted. 4. The Supplier With The Single/lowest Calculated Quotation (s/lcq) Shall Submit The Following Requirements Within Five (5) Calendar Days From Receipt Of Notice From The Prmd. Failure To Submit The Requirements Within The Period Prescribed Shall Result In The Non-compliance Of The Supplier’s Quotation/proposal. A. Legal Documents: A.1 Philippine Government Electronic Procurement System (philgeps) Registration Number; A.2 Valid Mayor’s/business Permit; And A.3 Supplier's Notarized Omnibus Sworn Statement (use Gppb Prescribed Form As Per Gppb Resolution No. 16-2020) Together With The Notarized Proof Of Authorization (e.g., Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney). Notes: I. If Bidding As A Joint Venture (jv), All Partners Must Submit The Above Documents; Ii. In Lieu Of The Mayor’s Permit And Philgeps Registration Number, The Philgeps Certificate Of Platinum Membership, Including Annex A, May Be Submitted, Provided That The Details Of The Mayor’s Permit Under Annex A Must Be Valid As Of Bidding Date; And Iii. For Individuals Engaged Under 53.9 Of The 2016 Revised Irr, Only The Bir Certificate Of Registration Shall Be Submitted In Lieu Of Dti Registration And Mayor’s Permit. B. Financial Document: Y2023 Income Return (itr)/business Tax Return For The Quarter Ending 31 December 2023 Duly Filed Thru Electronic Filing And Payment System (efps) Of Thebir, As Provided For Under E.o. 398 Or Rr 3-2005, Together With The Filing And Payment References References (disregard If You Have Already Submitted/updated The Same); And C. Technical Documents: C.1 Valid Notarized Jv Agreement (jva), If Applicable; C.2 Bsp Terms And Conditions Duly Signed By The Supplier’s Authorized Representative On The Conforme Page. C.3 Bsp Terms Of Reference Duly Signed By The Supplier’s Authorized Representative On The Conforme Page; C.4 Bsp Supplied Evaluation Matrix (bspsem) Duly Accomplished By The Supplier’s Authorized Representative: And Notes: I. Bidder Shall Indicate Under Column 2 The Specifications Of Its Actual Offer And Under Column 3, The Documents That Will Support Its Statement In Column 2. Ii. The Bspsem Need Not Be Signed By The Bidder’s Authorized Representative But Must Be Accomplished And Submitted As Per Schedule Indicated Above. C.5 Supplier’s Proof Of Offer Containing All The Technical Information Listed In The Attached Bsp-supplied Evaluation Matrix (bspsem) And Other Relevant Information Necessary For Validation, In Any Of The Following: I. Original Or Copy Of The Printed Product Brochure(s) From The Manufacturer; Or Ii. Printed Product Brochure(s) Downloaded From The Internet With Indication Of Its Source (e.g. Website); Or Iii. Manufacturer’s Catalog Data Of The Materials/equipment To Be Installed With Highlights On The Data Conforming To The Bsp Specifications; C.6 Certification Requirements Stating The Following: I. Authority Of Bidder Issued By Manufacturer Or Distributor To Supply The Requirement If The Bidder Is A Reseller, It Should Also Submit The Authority Of Distributor; Ii. Bidder’s Statement That It Has An Authorized Technical Support/service Center/branch/partner Distributor In Manila Or Other Cities And Provinces; Iii. Certification From The Manufacturer On The Availability Of Spare Parts And After-sales Services. 5. The Scanned Actual Signature Of The Authorized Representative Of The Prospective Bidder, Cropped And Pasted Handwritten Signatures, Adobe-created Signatures, Unique Figures And Symbols And Stamped Signatures Are Acceptable As E-signatures. Provided, That Original Documents Not Using Digital Signatures Shall Be Transmitted During Contract Execution. However, Text-typing The Name Of The Bidder And/or The Words “sgd. Or Original Signed” And The Like Without Distinctive Features Are Not Acceptable. 6. The Bsp Assumes No Responsibility Whatsoever To Compensate Or Indemnify Any Supplier For Expenses Incurred In The Preparation Of Quotations/proposals. 7. The Bsp Reserves The Right To Reject The Quotations/proposals Or Not Award The Contract And Makes No Assurance That A Contract Shall Be Entered Into As A Result Of This Request. 8. The Bsp May Suspend The Conduct Of Procurement Activities Adversely Affected Or Interrupted By The Declaration Of A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions At Any Time During The Existence Of Such Calamity, Or Quarantine Or Similar Restrictions, And When It Has Assessed Or Determined That: (a) No Supplier Will Be Able To Submit A Quotation/proposal Or Comply With The Requirements Of The Procurement Rules Due To The Limitations Resulting From The Declaration Of A State Of Calamity, Or Implementation Of A Community Quarantine Or Similar Restrictions; Or (b) Conduct Of Procurement Activities Cannot Be Undertaken Without Endangering The Health And Welfare Of Its Personnel Despite The Work From Home Or Other Alternative Work Arrangements. 9. The Bsp May Cancel Or Terminate The Conduct Of Procurement Activities, For Any Justifiable Reason, Such As But Not Limited To: (a) Physical And Economic Conditions Have Significantly Changed So As To Render The Project No Longer Economically, Financially, Or Technically Feasible, As Determined By The End-user Unit; (b) Project Is No Longer Necessary As Determined By The End-user Unit; (c) Source Of Funds For The Project Has Been Withheld Or Reduced Through No Fault Of The Bsp; Or (d) Brought About By The Declaration Of A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions (sec. 35.6 Of The 2016 Revised Irr). 10. The Bsp May Declare Failure Of Bidding/procurement Based On Its Assessment And Review Of All Its Planned And Ongoing Procurement Pursuant To Section 1 Of Gppb Resolution No. 09-2020. 11. The Bsp Aims To Ensure That Only Vendors/suppliers With Known Experience And Proven Capability On The Requirements Of The Particular Contract Should Continue To Participate In Bsp Procurement. Hence, In Line With Section 9(e) Of The 2016 Revised Irr Of R.a. No. 9184, The Bsp Evaluates The Performance Of Suppliers/vendors By Rating The Supplier’s Responsiveness To Bsp Specifications/terms Of Reference, Promptness Of Delivery, Quality Of Goods/services, And Offer’s Value For Money. Sgd Leidy Zara Myeth B. Loreto Manager Attachments: Bsp Quotation/proposal Form Bsp Terms And Conditions Bsp Terms Of Reference And Annexes Bsp Supplied Evaluation Matrix Bid Cost Sheet Omnibus Sworn Statement Corporate Secretary’s Certificate/special Power Of Attorney

Details: Description Republic Of The Philippines Province Of Cebu City Of Carcar Bids And Awards Committee Request For Quotation Mode Of Procurement : Shopping Control No : P.r. No. : 2024-171 Total Abc : 55,000.00 Project / Activity : Supply And Delivery Of One (1) Unit Computer With Printer For Office Use Requesting Office : Hrmo Name Of Bidder Address Gentlemen: Please Quote Your Prices On The Following Article Listed Below Which The City Of Carcar Desires To Buy If Advantageous To The Government. For Your Protection You Are Requested This Quotation In Duly Sealed Envelope Which May Be Opened Only By A Duly Authorized Representative Of The Bids And Awards Committee. Dr. Mary Ann M. Gabona Bac Chairperson Item No. Item Description Qty. Unit Unit Price Total Price Computer With Printer 1 Unit Computer Specifications: Processor: "sockets Supported: Fclga1200 Total Cores: 8 Total Threads: 16 Max Turbo Frequency: 4.8 Ghz Processor Base Frequency: 2.9 Ghz Cache: 16 Mb Smart Cache Bus Speed: 6 Gt/s Thermal Design Power: 65 W Memory Types: Ddr4-2933 Max Memory Bandwidth: 45.8 Gb/s Gpu Base Frequency: 350 Mhz Gpu Max Dynamic Frequency: 1.2 Ghz 4k Support: Yes, At 60hz Safety Standards Compliance Recommended" Motherboard: "microatx 22.6cmx18.5cm Support Above Processor Socket Supported: Lga1200 Chipset: H470 Express Support For Ddr4 2933/2666/2400/2133 Mt/s Memory Modules Onboard Graphics Hd Graphics Support: 1xhdmi Port Supporting A Maximum Resolution Of 4096x2160@30hz Support For Hdmi 1.4 Version And Hdcp 2.3 Audio: High Definition Audio 2/4//5.1/7.1-channel Lan: Gbe Lan Chip(1 Gbps/100mbps/10mbps Expansion Slots: 1xpci Express X16 Slot Supporting Pcie 3.0 And Running At X16 Storage Interface: 1xm.2 Connector(socket 3, M Key, Type 2280 Sata And Pcie 3.0 X4/x2 Ssd Support 2xsata 6gb/s Connectors Usb: 4xusb 3.2 Gen 1 Ports(2 Ports On The Back Pane, 2 Ports Available Through The Internal Usb Header) With Basic Internal I/o Connectors With Basic Back Panel Connectors I/o Controller: Ite I/o Controller Chip With H/w Monitoring: Voltage Detection, Temperature Detection, Fan Speed Detection, Fan Fail Warning, Fan Speed Control" Ram: "capacity: Single 8gb, Udimm Frequency: 2666mt/s, Ddr4 Latencies: Cl16 To 19 Voltage: 1.2v, 1.35v Operating Temperatur: 0 To 70 Degrees Celcius Xmp Certified And Xmp-ready To Reach Speeds Up To 3733mt/s Plug N Play: Yes Memory Profile: 2666mt/s 16-18-18 1.2v Pcb Color: Black" Storage Ssd: "1 Terabyte Pcie 4.0 Nvme Ssd M.2 2280 Pcie 4.0 X4 Nvme Sequential Read/write: 3,500/2,100mb/s For 1tb Nand: 3d Mtbf: 2,000,000 Hours Operating Temperature: 0°c To 70°c Weight: 7g Rohs Compliance: Yessafety Standards Compliance Recommended" Chassis And Power Supply: "case Size: 360x208x425mm Material: 0.6mm Spcc Color: Black M-atx, Itx Expansion Slots: 4 Max Vga Length: 350/330mm Max Cpu Height: 160mm Power Supply: 210mm, Bottom Cooling System: Front 120mm" "fanx2rear: 120radiator/120mm Fanx1 Left Panel: Tempered Glass Front Panel: Metal Top: 240mm Radiator / 120mm Fanx2 / 140mm Fanx2 Input/output: Usb 3.0 (x1) / Usb 2.0(x2) / Hd Audio Front Panel: Metal | Left Panel: Tempered Glass" Included Power Supply Specifications: "ac Input: 200 To 240v, 50hz/5a Dc Output +3.3v 18a 130w | +5v 20a 130w | +12v 49a 588w | -12v 0.3a, +5vsb 3a | Total 600w Connectors: Mbx1 24 Pin, Cpux1 8 Pin, P-atax2 4 Pins, S-atax6, Pci-ex2 Protection: Uvp, Ovp, Scp, Opp, Ocp 120mm Silent Fan Reduce Vibration 80plus Active Pfc 105 Degree Celcius Japanese Standby Capacitors Up To 86% Efficiency Under 230v Safety Standards Compliance Recommended" Monitor: "display Size(in.): 22, Viewable Area(in.): 21.5 Panel Type: Va Technology, Resolutions: 1920x1080 Resolution Type: Fhd(full Hd), Light Source: Led Brightness: 250 Cd/m² (typ), Colors: 16.7m Color Space Support: 8 Bit True, Aspect Ratio: 16:9 Viewing Angles: 178º Horizontal, 178º Vertical,backlight Life (hours): 30000 Hrs (min), Curvature: Flat, Refresh Rate (hz): 100, Variable Refresh Rate Technology: Freesync Blue Light Filter: Yes, Flicker-free: Yes Color Gamut: Ntsc: 72% Size (typ) Srgb: 104% Size (typ) Pixel Size: 0.249 Mm (h) X 0.241 Mm (v) Surface Treatment: Anti-glare, Hard Coating (3h) Connector: Vga: 1, 3.5mm Audio Out: 1, Hdmi 1.4: 1 Power: Eco Mode(conserve): 13w, Eco Mode(optimized): 15w, Consumption(typical): 17w, Consumption(max): 22w Voltage: Ac 100 - 240v : Stand-by: 0.5w Power Supply: External Power Adaptor Video Input: Digital Sync: Tmds - Hdmi(v1.4), Analog Sync: Sperate - Rgb Analog : Ergonomics: Tilt(forward/back): -5º / 20º | Weight: 2.4kgs Power Management: Energy Star Standards, Epeat Safety Standards Compliance Recommended" Ups: "input Voltage: 220vac Frequency: 50hz-60hz Capacity Va/wattage: 1000va/700watts Transfer Time: ≤10ms Including Direction Time Battery: Sealed Lead Acid Maintenance-free Safety Standards Compliance Recommended" Mouse And Keyboard: Usb Type Mouse And Keyboard Bundle Printer Specifications: "printer Type: Print, Scan, Copy Print Method: On-demand Inkjet(piezoelectric) Printer Technology: Printer Language: Esc/p-r, Esc/p Raster Nozzle Configuration: 180x1 Nozzles Black, 59x1 Nozzles Per Colour(cyan, Magenta, Yellow) Maximum Resolution: 5760x1440 Dpi Print Speed: Photo Default - 10x15cm / 4x6"" *1: Approx. 69 Sec Per Photo (border)/90sec Per Photo (borderless)*2 Draft, A4 (black/colour): Up To 33.0ppm / 15.0ppm*2 Iso 24734, A4 Simplex (black / Colour): Up To 10.0ipm / 5.0ipm*2 First Page Out Time From Ready Mode (black/colour): Approx. 10 Sec/16 Sec*2 " "copying: Maximum Copies From Standalone: 20 Copies Maximum Copy Resolution: 600x600dpi Maximum Copy Size: A4, Letter Iso 29183, A4 Simplex (black/colour): Up To 7.0ipm / 1.7ipm Scanning: Scanner Type: Flatbed Colour Image Scanner Sensor Type: Cis Optical Resolution: 600x1200dpi" "maximum Scan Area: 216x297mm Scan Speed: Flatbed (black / Colour): 200dpi: Up To 11 Sec / Up To 32 Sec Paper Handling: Number Of Paper Trays: 1 Standard Paper Input Capacity: Up To 100 Sheets Of Plain Paper (80 G/m2), Up To 20 Sheets Of Premium Glossy Photo Paper Output Capacity: Up To 30 Sheets Of Plain Paper (80 G/m2), Up To 20 Sheets Of Premium Glossy Photo Paper Maximum Paper Size: 215.9x1200mm Paper Sizes: Legal(8.5x14""), Indian-legal(215x345mm), 8.5x13"", Letter, A4, 16k(195x270mm), B5, A5, B6, A6, Hagaki(100x148mm), 5x7"", 5x8"", 4x6"", Envelopes: #10, Dl, C6 Rated Voltage: Ac 220 - 240v Rated Frequency: 50-60hz Operating Power: 14.0w, Sleep: 0.4w, Power Off: 0.2w, Standby: 4.0w Interface: Usb 2.0 Safety Standards Compliance Recommended" Total (signature Of Bidder Over Printed Name) Please Label Your Envelope. Sign Your Quotation And State The Brand Of Articles Quoted. Canvassed By: _________________________________

Details: Description 1 Pc Fulbrook, P.s. (2020). An Introduction To Learning Theories: 15 Of The Most Influential Learning Theories, Simplified And Explained. Independently Published. Isbn 979-8613005253 1 Pc Mukta, G. (2022). Learner's Psychology. Notion Press. Isbn 979-8887174303 1 Pc Taylor, B. (2020). Design Thinking Plcs: Revolutionize Teacher Collaboration. New School Innovation Consulting Llc. Isbn 978-1952307003 1 Pc Gallagher, A. & Thordarson, K. (2020). Design Thinking In Play: An Action Guide For Educators. Ascd. Isbn 978-1416628859 1 Pc Banks, J.a., & Crocco, M.s. (2021). Transforming Multicultural Education Policy And Practice: Expanding Educational Opportunity (multicultural Education Series). Teachers College Press. Isbn 978-0807766279 1 Pc Hibbert, E., & Hibbert, R. (2023). Multiplying Leaders In Intercultural Contexts: Recognizing And Developing Grassroots Potential. William Carey Publishing. Isbn ‎978-1645084457 1 Pc Wan, E., & Hedinger, M., & Raibley, J. (2023). Transformational Growth: Intercultural Leadership/discipleship/mentorship (relational). Western Academic Publishers. ‎ Isbn 978-1954692183 1 Pc Patent, J.d. (2023). Humanly Possible: A New Model Of Leadership For A More Inclusive World. New Degree Press. Isbn‎ 979-8885044448 1 Pc Lawrence, S.j. (2020). The Layman’s Guide To Understanding Financial Statements: How To Read, Analyze, Create & Understand Balance Sheets, Income Statements, Cash Flow & More. Independently Published. Isbn‎ 979-8691738760 1 Pc Jenkins, N. (2023). The Inclusive Organization: Real Solutions, Impactful Change, And Meaningful Diversity. Wiley. Isbn 978-1119910138 1 Pc Wilkinson, B. (2021). The Diversity Gap: Where Good Intentions Meet True Cultural Change. Harper Collins. Isbn 978-1400226238 1 Pc Wilson, K. (2023). Diversity, Equity, And Inclusion In The Workplace: Developing Dei Solutions. Independently Published. Isbn 979-8378734771 1 Pc "bhargava, R., & Brown, J. (2021). Beyond Diversity: 12 Non-obvious Ways To Build A More Inclusive World. Ideapress Publishing Isbn 978-1646870516" 1 Pc Anand, R. (2021). Leading Global Diversity, Equity, And Inclusion: A Guide For Systemic Change In Multinational Organizations. Berrett-koehler Publishers. Isbn‎ 978-1523000241 1 Pc Symaco, L.p., & Dumanig, F.p. (202). Education And Language In The Philippines. Lexington Books.isbn 978-1793602954 1 Pc Dewitt, P.m. (2020). Instructional Leadership: Creating Practice Out Of Theory. Corwin Isbn 978-1544381411 1 Pc Goodwin, B. (2022). The New Classroom Instruction That Works: The Best Research-based Strategies For Increasing Student Achievement. Ascd. Isbn 978-1416631613 1 Pc Donahue, W.e. (2023). Developing Project Costs And Budgets: A Competency-based Approach That Integrates Financial Management And Budgeting With Management Controls (workbooks For Structured Learning). Independently Published. Isbn 979-837296870 1 Pc Verney, S. (2021). Leadership In Complexity And Change: For A World In Constant Motion (de Gruyter Transformative Thinking And Practice Of Leadership And Its Development, 1). De Gruyter. Isbn 978-3110713060 1 Pc Brag, S.m. (2020). Financial Analysis (4th Ed.). ‎ Accountingtools, Inc. Isbn 978-1642210545 1 Pc Edet, T. (2021). Digital Financial Resources Management. Independently Published. Isbn 979-8710193365 1 Pc Tearle, R. (2020). Organizational Development: How To Choose The Right Intervention (organizational Development Interventions Library). Independently Published. Isbn 979-8666414026 1 Pc Stone, J.c. (2019). The Teaching Of Arithmetic. Wentworth Press. Isbn 978-0526016723 1 Pc Lai, C. (2023). Insights Into Autonomy And Technology In Language Teaching (language Teaching Insights). Castledown Publishers. Isbn 978-1914291111 1 Pc Mendoza, A. (2023). Translanguaging And English As A Lingua Franca In The Plurilingual Classroom (bilingual Education & Bilingualism, 137. Multilingual Matters. Isbn 978-1800413429 1 Pc Aubrey, K., & Alison Riley, A. (2022). Understanding And Using Educational Theories (3rd Ed.). Sage Publications Ltd. Isbn 978-1529761306 1 Pc Nygaard, L.p., & Solli, K. (2021). Strategies For Writing A Thesis By Publication In The Social Sciences And Humanities. Routledge. Isbn 9780367204075 1 Pc Skerry, P.j. (2023). Writing Errors And Their Ways: Correction Strategies For The 21st Century. Rowman & Littlefield Publishers. Isbn 9781475872835 1 Pc Hammond, M. (2022). Writing A Postgraduate Thesis Or Dissertation: Tools For Success. Routledge. Isbn 9780367752828 1 Pc Muijs, D. (2022). Doing Quantitative Research In Education With Ibm Spss Statistics (3rd Ed.). Sage Publications Ltd (uk). Isbn 9781526432681 1 Pc Allen, V. (2020). Behavioural, Emotional And Social Difficulties In School (1st Ed.). Routledge. Isbn 978-0367341831 1 Pc Kvernbekk, T. (2021). The Nature Of Educational Theories: Goal-directed, Equivalence And Interlevel Theories. London: Routledge. 9781138488557 1 Pc Flygare, J., & Hoegh, J.k. (2021). Planning And Teaching In The Standards-based Classroom. Marzano Resources Isbn ‏978-1943360710 1 Pc Orr, D., Luebcke, M., & Schmidt, P.j. (2020). Higher Education Landscape 2030: A Trend Analysis Based On The Ahead International Horizon Scanning (1st Ed.) Springer. Isbn 978-3030448967 1 Pc Mickan, P., & Wallace, I. (2020). The Routledge Handbook Of Language Education Curriculum Design. Routledge. Isbn 9781138958579 1 Pc Ramonyai, J. (2022). Management Methodology: Research Design, Methods, Data Analysis, Questions, Proposal Report Writing, Dm9, Quick Reference Guide Handbook, Education, ... Quantitative, Qualitative, Mixed Methods. Independently Published. Isbn 979-8428625417 1 Pc Humble, S. (2020). Quantitative Analysis Of Questionnaires: Techniques To Explore Structures And Relationships. Routledge. Isbn 978-0367022839 1 Pc "billups, F.d. (2021). Qualitative Data Collection Tools: Design, Development, And Applications. Sage Publications, Inc. Isbn 9781544334820" 1 Pc Klöter, H., And Saarela, M.s. (2020). Language Diversity In The Sinophone World: Historical Trajectories, Language Planning, And Multilingual Practices (routledge Studies In Sociolinguistics). 1st Ed. London: Routledge. Isbn 978-0367504519 1 Pc Stracke, N. (2021). Leadership Skills In An Intercultural Context. Grin Verlag. Isbn 978-3346433787 1 Pc Shapiro, J.p., & Stefkovich, J.a. (2021). Ethical Leadership And Decision Making In Education (5th Ed.). Routledge. Isbn 978-0367901394 1 Pc By, R.t., Burnes, B., & Hughes, M. (2023). Organizational Change, Leadership And Ethics (routledge Studies In Organizational Change & Development) (2nd Ed.). Routledge. Isbn 978-0367477509 1 Pc Kuenkel, P. (2020). Leading Transformative Change Collectively. Routledge. Isbn 978-0367471187 1 Pc Kim, J., &maloney, E.j. (2020). Learning Innovation And The Future Of Higher Education. Johns Hopkins University Press. Isbn 978-1421436630 1 Pc Kolb, L. (2020). Learning First, Technology Second In Practice: New Strategies, Research And Tools For Student Success. International Society For Technology In Education. Isbn 978-1564848383 1 Pc Spring, J. (2021). Today’s Guide To Educational Policy: Pandemics, Disasters, Nationalism, Religion, And Global Politics. London: Routledge. Isbn 9780367740481 1 Pc Milligan, J.a. (2020). Islamic Identity, Postcoloniality, And Educational Policy: Schooling And Ethno-religious Conflict In The Southern Philippines (islam In Southeast Asia) (2nd Ed.). Palgrave Macmillan. Isbn 978-9811512308 1 Pc Curren, R. (2023). Handbook Of Philosophy Of Education. Routledge. Isbn 9781032000039 1 Pc Grillman, B.o., & Borjian, M. (2022). Remaking Multilingualism: A Translanguaging Approach (translanguaging In Theory And Practice, 2). Multilingual Matters. Isbn 978-1800410831 1 Pc Green, A. (2021). Exploring Language Assessment And Testing: Language In Action (2nd Ed.). Routledge. Isbn 9781138388772 1 Pc Fox, J., & Artemeya, N. (2022). Reconsidering Context In Language Assessment: Transdisciplinary Perspectives, Social Theories, And Validity. Routledge. Isbn 9781032244846 1 Pc Hidri, S. (2020). Perspectives On Language Assessment Literacy Challenges For Improved Student Learning. Routledge. Isbn 9780367859695 1 Pc Harris, J.t., Lane, J.e., Sun, J.c., & Baker, G.f. (2020). Academic Leadership And Governance Of Higher Education: A Guide For Trustees, Leaders, And Aspiring Leaders Of Two- And Four-year Institutions. Routledge. Isbn 9781642674095 1 Pc Tamayao, A.i. (2019). Embracing The Teaching Profession. Rex Book Store. 1 Pc Pawilen, G.t. (2019). Teaching Profession Passion And Mission. Rex Book Store. 1 Pc Estrada, J.m. (2023). Code Of Ethics Of Professional Teachers. Rex Book Store. 1 Pc Nash, J.b. (2019). Design Thinking In Schools: A Leader’s Guide To Collaborating For Improvement. Harvard Education Press. Isbn 978-1682534199 1 Pc Wehmeyer, M., & Zhao, Y. (2020). Teaching Students To Become Self-determined Learners. Ascd. Isbn 978-1416628934 1 Pc De Houwer, J. & Hughes, S. (2020). The Psychology Of Learning: An Introduction From A Functional-cognitive Perspective. The Mit Press. Isbn 9780262539234 1 Pc Effrosyni Kostar, E., Gavrielatos, A. (2022). Transformative Learning Theory And Praxis (1st Ed.). Routledge. Isbn‎ 978-1138325043 1 Pc Khoo, J., Sterken, R.k. (2021). The Routledge Handbook Of Social And Political Philosophy Of Language (routledge Handbooks In Philosophy). Routledge. Isbn 9780367759575 1 Pc Wolf, M.p. (2023). Philosophy Of Language: 50 Puzzles, Paradoxes, And Thought Experiments. Routledge. Isbn 9781032023861

Details: W912ee - Proposed Indefinite Delivery Type (idt) Contracts For Three (3) Contracts For Surveying And Mapping Services. Services To Be Performed Primarily Within 3 Usace Districts (memphis, Vicksburg, And New Orleans) That Comprise The Lower Portion Of The Mississippi Valley Division Of The U.s. Army Corps Of Engineers. (restricted To Small Business Firms) this Pre-solicitation Notice Is For Interested Firms To Submit Their Sf 330 By May 2, 2024, 1600 Hours, Cst. Firms Will Be Selected For Negotiations Based On Demonstrated Competence And Qualifications For The Required Work. This Is Not A Request For Proposal. 1. Contract Information: Sf 330s Are Due By Close Of Business On May 2, 2024, 1600 Hours, Cst. Firms Will Be Selected For Negotiation Based On Demonstrated Competence And Qualifications For The Required Work. Three (3) Indefinite Delivery Contracts Will Be Negotiated And Awarded As A Result Of This Solicitation. These Contracts Will Share The $20m Combined Capacity Of The Matoc. Each Contract Will Have A Performance Period Of Five (5) Years From The Date Of Contract Award Or Exhaustion Of The Matoc Capacity Of $20 Million, Whichever Comes First. There Will Be A $1,000 Minimum Guarantee Amount For Each Contract Awarded. the Work Will Be Accomplished Primarily Within The Vicksburg District But May Be Within The Mississippi Valley Division (mvd) And Other Areas As Needed To Support The Mission Of The Us Army Corps Of Engineers. Work Will Be Issued By Negotiated Firm Fixed-price Or Labor-hour Task Orders. It Is Anticipated That The Estimated Workload For Each Year Will Be $2.0 Million. The Cumulative Total Of Task Orders Issued Over The Life Of The Matoc Shall Not Exceed $20.0 Million. Allocation Of Task Orders Will Be Based On Specialized Experience, Past Performance, Project Schedules, And/or Current Workload. contract Award Is Anticipated In November 2024. this Procurement Is Being Offered As A Total Small Business Set-aside, Under Naics Code 541370 – Surveying And Mapping Services. The Small Business Size Standard For Naics Code 541370 Is $19m. 2. Project Information: A-e Service Capabilities Are Required For Various Civil Works Projects And Support For Other Agencies. Work May Be Comprised Of Topographic Surveys, Hydrographic Surveys, Dredge Material Measurement Surveys, Monitoring Surveys, Construction Layout Surveys, Geodetic Control Surveys, Mobile Laser Scanning, Boundary And Cadastral Surveys, Gps Surveying And Mapping. Firms With Demonstrated Specialized Experience, Competence, And Qualifications Pertinent To Survey Engineering, Geodetic Surveying, Land And Boundary Surveying, Hydrographic Surveying, Mapping (microstation, In-roads And Civil3d Capability Required) And Related Services Are Desired For Consideration. The Services Performed Under This Contract May Support The Government Revetment Construction Project Along The Mississippi River Located In The Memphis, Vicksburg, And New Orleans Districts. Work Areas Will Normally Be Within The Boundaries Of The Vicksburg District But May Also Be Used Anywhere Within The Geographical Boundaries Of The Mississippi Valley Division Or Other Missions Of The Vicksburg District Of The U.s. Army Corps Of Engineers. 3. Selection Criteria: Selection Will Be Based On The Following Criteria, Which Are Listed In Descending Order Of Importance. Criteria A Through E Are Primary; Criteria F Is Secondary And Will Only Be Used As A "tie-breaker," If Necessary. (a) Specialized Experience: The Selected Firm Shall Have The Capability To Provide Digital Surveying And Mapping Data In Readable And Fully Operational Format On The District's Computer Aided Design And Drafting (cadd) Or Gis Systems. Data Submission Shall Be Required In Native Microstation (.dgn) Or Autodesk Design Files (.dwg), In-roads (.dtm) Digital Terrain Model Files Or Civil 3d (.tin) Triangulated Irregular Network Files, In-roads Alignment Files (.alg) Or Civil 3d Survey Database Files (.sdbx) And Occasionally In Gis (.shp And Personal Geodatabases) Formats. Firms With Demonstrated Specialized Experience, Competence, And Qualifications Pertinent To Surveying Are Desired For Consideration. Firms Considered To Be Highly Qualified Will Be Required To Furnish At Least Five Fully Equipped Survey Crews With Four-wheel Drive Vehicles And Approved Electronic Total Station Surveying Instruments And Related Equipment. Additional Crews May Be Required. Highly Qualified Firms Shall Be Required To Have Both Code And Carrier Phase L1/l2 Gps Receivers. A Firm Will Be Considered If It Can Demonstrate The Capability To Provide These Personnel And Equipment By Such Means As An Increase In Staffing, Subcontracting, Or Joint Venture. At Least Two, With A Possibility Of Four, Fully Automated Hydrographic Survey Systems (single Fathometer) Operational On A Boat Not Less Than 21 Feet In Length Equipped With Coast Guard Radio Beacon Dgps Shall Be Required In Addition To Ground-based Crews. Each Hydrographic And Topographic Party Provided Shall Have The Capability To Collect And Process Each Survey Performed At The Work Site (plot Cross Sections, Compute Volumes, Revetment Re-designs, Etc.). One Electronic Hydrographic Sweep System (no Booms) On A Boat With A Length No Greater Than 30 Feet (trailerable) With Coast Guard Radio Beacon Dgps Will Be Required Either Through In-house Capabilities Or Subcontracting. Additional Conventional Hydrographic Systems May Also Be Required Where Gps Is Unavailable. Firms Considered To Be Highly Qualified Shall Be Required To Show Specialized Experience In Performing All Types Of Surveys As Stated Above And Subsequent Data Reduction And Plotting Utilizing State-of-the-art Computer Technology. (b) Professional Qualifications: The Prime Firm And/or Its Subcontractor(s) (hereinafter Referred To Collectively As "firm") Must Have Registered Professional Civil Engineers And Land Surveyors On Staff. The Firm Must Have At Least One Professional Land Surveyor Licensed In Each Of The Following States: Mississippi, Louisiana, And Arkansas. The Firm Should Indicate Professional Recognition, Professional Associations, Advanced Training, Certification, And Specific Work Experience Of Key Personnel. The Firm Should Emphasize The Qualifications And Experience Of Its Management Personnel In Survey Engineering, Hydrographic, Topographic And Geodetic Surveying. (c) Past Performance: Performance Evaluations On Previous Contracts With Government Agencies, Including Department Of Defense (dod), And Private Industry In Terms Of Cost Control, Quality Of Work, And Compliance With Performance Schedules Will Be Considered. Additional Consideration Will Also Be Given To Firms That Have Above Average Performance Evaluations In The Type Of Work Described In (a) Above. (d) Capacity: Firms Must Be Able To Provide The Survey Crews And Equipment As Described In The Specialized Experience Paragraph To Be Considered Highly Qualified. Firms Must Demonstrate Sufficient Personnel In The Disciplines Necessary To Conduct The Required Work In An Efficient Manner. (e) Knowledge Of Locality: A Firm's Knowledge Of The Locality Will Be Given Consideration. The Firm Should Demonstrate Its Knowledge Of The Geographical And Topographical Features Of The Area Within The Boundaries Of The Vicksburg District, And Its Familiarity With The Major Rivers And Tributaries Of The Area All As Related To Survey Engineering, Mapping, And Related Services. (f) Volume Of Dod Work: Dod Contract Awards In The Past 12 Months. The Greater The Awards The Lesser The Consideration. In The Final Selection Process, The Most Highly Qualified Firms Will Be Interviewed. 4. Submission Requirements: Interested Firms Having The Capabilities For This Work Must Submit One Electronic Copy Of Sf 330 Along With A Signed Copy Of Part Ii Of Each Sub-consultant’s Sf 330 To: Mvkaecoordinator@usace.army.mil, With Copy Provided To Lawren Boolos At Lawren.boolos@usace.army.mil No Later Than 1600 Hours, Cst, On May 2, 2024. Include Both The Solicitation Number And The Company’s Uei Number On All Submittals. note The Following Restrictions On Submittal Of Sf330; Block E – Resumes Of Key Persons, Specialist And Individual Consultants Anticipated For This Project Will Be Limited To A Maximum Of 20 Pages (one Side). Block H—additional Information Will Be Limited To A Maximum Of 20 Pages (one Side). Pages In Excess Of The Maximum Of 20 Will Be Discarded And Not Used In Evaluation. All Telephone Calls Should Be Directed To Ms. Michelle Moore, (601) 631-5139. appointments Will Not Be Scheduled To Discuss This Announcement. this Is Not A Request For Proposal. A Fee Proposal Will Be Requested At A Later Date. ****note: Contractors Must Be Registered In The System For Award Management (sam), For Information See Http: Www.sam.gov. 5. Inquiries Submission: pre-solicitation Number:w912ee24o0001 all Questions Must Be Submitted Via Projnet. technical Inquiries And Questions Relating To This Solicitation Are To Besubmitted Via Bidder Inquiry In Projnet At (https://www.projnet.org). Bidders Are Encouraged To Submit Questions5 Days Prior Tosf330 Submittalin Order To Ensure Adequate Time Is Allotted To Form An Appropriate Response And Amend The Solicitation, If Necessary. To Submit And Review Inquiry Items, Prospective Vendors Will Need To Use The Bidder Inquiry Key Presented Below And Follow The Instructions Listed Below The Key For Access. A Prospective Vendor Who Submits A Comment /question Will Receive An Acknowledgement Of Their Comment/question Via Email, Followed By An Answer To The Comment/question After It Has Been Processed By Our Technical Team. all Timely Questions And Approved Answers Will Be Made Available Through Projnet. Approved Answers To All Timely Questions Will Also Be Posted On The Fedbizops In The Form Of A Report Generated From Projnet As Soon As The Comment/question Entering Period Is Over And All Answers Are All Finalized. the Pre-solicitation Number Is:w912ee24o0001 the Bidder Inquiry Key Is:z4keni-5ggjuc specific Instructions For Projnet Bid Inquiry Access: 1. From The Projnet Home Page Linked Above, Click On Quick Add On The Upper Right Side Of The Screen. 2. Identify The Agency. This Should Be Marked As Usace. 3. Key. Enter The Bidder Inquiry Key Listed Above. 4. Email. Enter The Email Address You Would Like To Use For Communication. 5. Click Continue. A Page Will Then Open Saying That A User Account Was Not Found And Will Ask You To Create One Using The Provided Form. 6. Enter Your First Name, Last Name, Company, City, State, Phone, Email, Secret Question, Secret Answer, And Time Zone. Make Sure To Remember Your Secret Question And Answer As They Will Be Used From This Point On To Access The Projnet System. 7. Click Add User. Once This Is Completed You Are Now Registered Within Projnet And Are Currently Logged Into The System. specific Instructions For Future Projnet Bid Inquiry Access: 1. For Future Access To Projnet, You Will Not Be Emailed Any Type Of Password. You Will Utilize Your Secret Question And Secret Answer To Log In. 2. From The Projnet Home Page Linked Above, Click On Quick Add On The Upper Right Side Of The Screen. 3. Identify The Agency. This Should Be Marked As Usace. 4. Key. Enter The Bidder Inquiry Key Listed Above. 5. Email. Enter The Email Address You Used To Register Previously In Projnet. 6. Click Continue. A Page Will Then Open Asking You To Enter The Answer To Your Secret Question. 7. Enter Your Secret Answer And Click Login. Once This Is Completed You Are Now Logged Into The System.

Details: Description 3 Unit Laptop 149,985.00 Technical Specifications 1.processor: A.cpu Architecture Technology: Processor Model Should At Least Be The Latest Release B. Speed Frequency: 2.2 Ghz, Up To 4.6 Ghz C. Cores: 2 10 Cores D. Cache: 2 12mb L3 Cache 2. Operating System: A. Type: Latest Stable Proprietary Os 64bit B. Version: Professional Version (must Have The Capability To Join Active Directory) C. A Certificate Of Authenticity (coa) Genuine Label Or Equivalent Ofthe License From The Os Provider Should Be Provided (holographic Image Sticker) 3. Office Productivity Software: A. Type: Latest Stable Proprietary Ops For Corporate Application Perpetual B. Version: Business, Inclusive Of Word Processor, Spreadsheet, Presentation & Email For Offline Use 4. Memory: A. Capacity: 28 Gb Ddr4 B. Speed: Ddr4 - 2 3200mh2 5. Keyboard: Built-in 6. Pointing Devices/mouse: A. Type: Touchpad With Multi—gesture And Scrolling Function And Inclusive Of Standard Optical Mouse Usb (mouse Should Be The Same Brand Ofthe Laptop Being Offered) 7. Graphics Controller: Integrated 8. [/0 Ports: All Ports Should Be Lntegrated/built-in (no Conversations / Extension / Adapters Except On Ethernet Lan) A. 2 2 X Usb 3.0 Port B. 1 X Headphone / Microphone Or Combo Jack C. 1 X Rj-45 Lan (conversion Accepted) D. 1 X Hdmi E. 1 X Type-c Port 9. Display: 39.6 Cm (15.6 8: Quot; Diagonal, Fhd (1920 X 1080), Micro-edge, Anti-glare, 250 Nits, 45% Ntsc With A Built-in Webcam 10. Hard Drive: 2 512gb Pcie Nvme M.2 Ssd 11. Sound Controller: Integrated/built-in High Definition Audio System 12. Weight: 2 1.59 Kg. Including Battery 13. Communication: Must Be Integrated / Built- In (no Usb Conversion/extension/adapters) A. Wireless — Integrated Dual Band Wireless — 802.11 Ac/a/b/g/n; Bluetooth 4.0 B. Ethernet — Integrated 10/100/1000 Base-tx 14. Battery: Up To 7 Hours And 45 Minutes 15. Carrying Case: Laptop Bag (same Brand As The Offered) 16. Warranty 8:amp; Sla A. Three (3) Years Hardware Warranty B. One (1) Year On Mouse C. 8:lt; 4 Hours' Response Time For Issues Reported (thru Help Desk) D. A Service Unit Must Be Issued For A Unit That Can't Be Repaired Within The Day E. For Reported Hardware Replacement, The Service Provider Shall Be One To Pull Out The Unit 17. To Protect Dswd From Unreliable And Unproven Products The Following Is Required: A. Proposed Brand Should Be Iso 9000 Certified Or Better B. Proposed Brand Should Be Energy Star Compliant Or Equivalent C. Proposed Brand Should Have An Existing Technical Web Support System Where The Brand Providers/bidders Can Log-in And Key-in Product Service Codes/ Item Codes For Faster Tracking Of Defective / Rma Products And Faster Turn-around Oftechnical Support D. Proposed Brand Is An International Brand Name, Which Means That The Brand Is Known And Marketed Globally And Has An International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. Further, The Brand Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. E. Manufacturers Offered Model Should Be Available In The Markgtvandshould Not Be Custom-made Or Made To Orderjust To Comply With The Specification. 18. Delivery Period: 45 Calendar Days 19. Srp Not More Than: Flip 49,995.00 /unit 1 Unit Printer 45,020.00 Technical Specifications Printer Type: Print, Scan, Copy, Fax With Adp Printing: Precision Coretm Priiitliead 800 X 1 Nozzles Black, 256 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Bi-directional Printing 4800 X 2400 Dpi 3.8 Pl Up To 32.0 Ppm / 22.0 Ppm Simplex: Up To 25.0 Ipm / 12.0 Ipm/duplex: Up To 16.0 Ipm / 9.0 Ipm Simplex: Up To 13.5 Ipm/6.01pm/ Duplex: Up To 10.0 Ipm / 5.0 Ipm Simplex: Up To 5.5 Sec / 8.5 / Duplex: Up To 11 Sec/ 17 Sec Approx. 43 Sec Per Photo (border) / 52 Sec Per Photo (borderless) Esc/p-r, Esc/p Raster Yes (up To A3) Copying: Simplex: Up To 23.0 Ipm/ 10.0 Ipm Simplex: Up To 22.5 Ipm / 10.0 Ipin Duplex: Up To 15.5 Ipm / 7.5 Ipm 999 Copies 25-400% 600 X 600 Dpi A3 Scanning: Flatbed Colour Image Scanner Cis 1200 X 2400 Dpi 297 X 431.8 (mm) 48-bit Input, 24-bit Output 16-bit Input, 8-bit Output 16-blt Input, 1-bit Output Flatbed: 5 Sec / Adf (simplex/ Duplex): Up To 26.0 Ipm / 11.5 Ipm Flatbed: 10 Sec / Adf (simplex / Duplex): Up To 9.0 Ipm / 6.0 Ipm Adf Function: 64-95 G/m2 50 Sheets Card Slot/ Usb Host Function: Usb Memory Paper Handling: Friction Feed 3 (front 2, Rear 1) Cassette 1: 250 Sheets For A4 Plain Paper (80 G/mz), 50 Sheets For Premium Glossy Photo Paper Cassette 2: 250 Sheets For A4 Plain Paper (80 G/m2) Rear Slot: 50 Sheets For A4 Plain Paper (80 G/m'), 20 Sheets For Premium Glossy Photo Paper 125 Sheets For A4 Plain Paper (80 G/mz), 20 Sheets For Premium Glossy Photo Paper A3, Super B (13 X 19"), Lndian Legal, Letter, A4, 16k (195 X 270mm), 8k (270 X 390mm), Executive (7.25 X 10.5") 84, 05, A5, B6, A6, 8.5 X 13", S X 7", 4x6", 8x10", Legal (8.5 X 14"), 16.9 Wide, Envelope: #10, Dl, C6, C4 329 X 6000mm 3mm Top, Left, Right. Bottom Via Custom Settings In Printer Driver Fax Function: Walk-up Black-and-white And Colour Fax Capability 6mb. Page Memory Up To 550 Pages Ltu-t T.30 Up To 33.6 Kbps, Approx 3 Sec/page Up To 200 X 200 Dpi A5, A4, A3, 85, B4, Halfletter, Letter, 11 X 17" A5, A4, A3, 85, B4, Half Letter, Legal, 11 X 17" Half Letter, A5, 85, A4, Letter, Legal, 84, ‘1 1x17", As, A3+ Up To 200 Numbers, 199 Groups Pc Fax (transmissiou/receive), Automatic Redial, Address Book, Broadcast Fax (mono Only), Transmit Reservation, Polling Reception, Fax Preview, Memory Reception, Fax To Email, Fax To Folder, Automatic 2- Sided Fax Interface: Usb 2.0 Ethernet, Wi-fi [bee 802.11b/g/n, Wi—fi Direct Tcp/ipv4, Tcp/ipv6 Snmp, Http, Dlicp, Bootp, Apipa, Ping, Ddns, Mdns, Sntp, Slp, Wsd, Lltd Mobile And Cloud Printing: Epson Iprint, Epson Email Print, Remote Print Driver, Scan To Cloud Apple Aiprint, Mopria Print Service Electrical Specifications: Ac 220-240 V 50-60 Hz 19.0 W 9.1 W 0.8 W 0.2 W Noise Level: Sound Power (black / Colour) 6.7 8(a) / 6.2 8(a], Sound Pressure (black / Colour) 52 Db(a) / 47 Db (a) Consumables: Black Ink Bottle - 008 Cyan Ink Bottle Magenta Ink Bottle Yellow Ink Bottle 1 Unit Desktop 49,995.00 Technical Specification Operating System: Operating System 64-bit Processor 8: Chipset Processor Type - Coremis Processor Model - Intel® Core‘" I5-1240p Processor Speed - 1.7 Giiz Processor Speed (turbo) - 4.4 Ghz Cache - 12mb Cache Memory: Built-in Memory - 1 Standard Memory - 8 Gb Maximum Memory — Up To 3208 Memory Technology - Ddr4 Sdram Memory Card Reader — No Storage: Number Of Hard Drives - 1 Total Hard Drive Capacity - 1 Tb Total Solid-state Drive Capacity - 256 Gb Solid State Drive Interface - Nvme Ssd Optical Drive Type - No Display 8: Graphics: Screen Size - 60.5 Cm (23.8") Display Screen Technology - Led Touchscreen - No Muiti-touch Screen - No Screen Resolution - 1920 X 1080 Graphics Controller Manufacturer - Intel® Graphics Controller Model - Iris X3 Graphics Audio: Speakers — Yes Network 8: Communication: Wireless Lan - Yes Wireless Lan Standard - Leee 802.11ax/ac/a/b/g/n Ethernet Technology - Gigabit Ethernet [/0 Expansions: Number Of M2 Slot — 2 Interfaces/ports Hdmi - Yes Usb — Yes Number Ofusb 2.0 Ports - 1 Number Ofusb 3.2 Gen 2 Port- 3 Number Of Usb 3.2 (type-c) Ports - 1 Input Devices: Pointing Device Type - Usb Wired Mouse Keyboard Included — Yes Keyboard Type — Usb Wired Keyboard Software: Featured Software — Ms Office For Home 8: Student Power Description: Power Supply - 65w Physical Characteristics: Heiglit- 51.8 Cm Width — 62.6 Cm Depth 18.6 Cm Warranty: (warranty - 2 Years Warranty

Details: Description Request For Quotation 1. The Bangko Sentral Ng Pilipinas Requests The Submission Of Quotations/proposals For The Following Requirement/s: Name Of The Requirement/brief Description : One (1) Lot – Design, Origination, Manufacture, Supply And Delivery Of 20,000 Pcs. Security Hologram Stickers, As Per Bsp Terms Of Reference Approved Budget For The Contract (abc) : Php83,250.00, Inclusive Of All Applicable Taxes And Other Charges (quotations/proposals Exceeding This Amount Shall Be Disqualified.) Delivery Period : Within Forty-five (45) Calendar Days Reckoned From The Date Of Execution Of The Purchase Order. Reference : Bac-ho Gs No. 2024-0149 Dated 27 December 2023 Alternative Method Of Procurement : Negotiated Procurement – Small Value Procurement 2. All Particulars And Activities Relative To Eligibility Of Suppliers, Evaluation Of Quotations/proposals, Validation, And Award Of Contract Shall Be Governed By 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Revised Irr). Activity Schedule Details A. Issuance Of Rfq Starting 03 January 2024 In Support Of The Sustainable Banking Program Of The Bsp, Hard Copies Are No Longer Issued. B. Deadline Of Submission Of Quotations/ Proposals 08 January 2024; 12:00 N.n. Late Bids Shall Not Be Accepted. • Online Or Electronic Submission To The Following E-mails: A. Prmdi-dpc@bsp.gov.ph B. Guevarrarv@bsp.gov.ph Or • Physical Submission Of Hard Copy At Designated Bid Box For Delegated Procurement Located At Gate 3 Reception Lobby, Bangko Sentral Ng Pilipinas, A. Mabini Corner P. Ocampo Sr. Sts., Malate, Manila How To Submit Quotation/proposal For Manual Submission: 1. Supplier’s Representative Or Courier Service Provider Shall Fill-up The Bid Submission Form (bsf) Available At The Gate 3 Reception Lobby. 2. Insert The Bsf (front Portion Facing Up) In The Time Stamp Machine Twice To Indicate The Time Of Submission Of The Quotation/proposal In The Bsf 3. Drop The Quotation/ Proposal In The Bid Box. As Precautionary Measure, Participating Suppliers Are Instructed To: 1. Wrap/enclose Bidding Documents With Plastic, Preferably Clear To Facilitate Disinfection/sanitation; 2. Submit Documents At Least Thirty (30) Minutes Before The Scheduled Deadline Of Submission To Allow Time For Possible Queuing Due To Conduct Of Thermal Scanning, And For Sanitation Of The Bid Envelope(s) And Transit Of The Documents To The Procurement Management Department Office; For Electronic Submission: 1. Save, Copy Or Transfer All Electronic Documents In Separate Compressed/zipped Folders 2. Zipped Electronic Bid Folders To Be Submitted Can Be Opened Using The 7-zip Compression Tool 3. The Subject Matter Of The E-mail Shall State The Short Title Of The Requirement To Be Procured As Stated In The Procurement Opportunity, Name Of Bidder (all Caps) And The Folder And Batch Number Of The Documents Sent 4. To Avoid The Tampering Or Alteration Of Electronic Documents, Files Shall Be Sent As Attachment/s To The E-mail And Not Through A File Sharing Link. 5. The Bsp System Can Accommodate Attachments With File Size Limit Of Up To 100mb. If The Bidder’s E-mail Has A Smaller File Size Limit (e.g., In Case Of Free Mails, Such As Gmail And Yahoo Mail), It May Send Files In Batches All Written Requests/queries: Procurement Management Department Room 212, 2nd Floor, 5-storey Building Bangko Sentral Ng Pilipinas A. Mabini Corner P. Ocampo Sr. Streets, Malate, Manila Fax No.: (+632) 8708-7115 E-mail: Prmdi-dpc@bsp.gov.ph Note: All Requests Shall Be In Writing And Addressed To The Director, Procurement Management Department I. 3. Submit The Properly Filled Up Quotation/proposal On Or Before The Deadline Set Above (use Bsp-prescribed Form). Suppliers Can Modify Or Withdraw Their Quotations/proposals At Any Time Before The Deadline For The Submission And Receipt Thereof; Provided, That They Send Another Quotation/proposal, Which Is Labelled As A “modification” Of The One Previously Submitted. 4. The Supplier With The Single/lowest Calculated Quotation (s/lcq) Shall Submit The Following Requirements Within Five (5) Calendar Days From Receipt Of Notice From The Prmd. Failure To Submit The Requirements Within The Period Prescribed Shall Result In The Non-compliance Of The Supplier’s Quotation/proposal. A. Legal Documents: A.1 Philippine Government Electronic Procurement System (philgeps) Registration Number; A.2 Valid Mayor’s/business Permit; And A.3 Supplier's Notarized Omnibus Sworn Statement (use Gppb Prescribed Form As Per Gppb Resolution No. 16-2020) Together With The Notarized Proof Of Authorization (e.g., Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney). Notes: I. If Bidding As A Joint Venture (jv), All Partners Must Submit The Above Documents; Ii. In Lieu Of The Mayor’s Permit And Philgeps Registration Number, The Philgeps Certificate Of Platinum Membership, Including Annex A, May Be Submitted, Provided That The Details Of The Mayor’s Permit Under Annex A Must Be Valid As Of Bidding Date; And Iii. For Individuals Engaged Under 53.9 Of The 2016 Revised Irr, Only The Bir Certificate Of Registration Shall Be Submitted In Lieu Of Dti Registration And Mayor’s Permit. B. Technical Documents: B.1 Valid Notarized Jv Agreement (jva), If Applicable; B.2 Bsp Terms And Conditions Duly Signed By The Supplier’s Authorized Representative On The Conforme Page. B.3 Bsp Terms Of Reference Duly Signed By The Supplier’s Authorized Representative On The Conforme Page; B.4 Bsp Supplied Evaluation Matrix (bspsem) Duly Accomplished By The Supplier’s Authorized Representative: Notes: I. Bidder Shall Indicate Under Column 2 The Specifications Of Its Actual Offer And Under Column 3, The Documents That Will Support Its Statement In Column 2. Ii. The Bspsem Need Not Be Signed By The Bidder’s Authorized Representative But Must Be Accomplished And Submitted As Per Schedule Indicated Above. B.5 Sample Of Previous Work(s) Similar To The Required Technical Specifications As Stated In Item 1 Of The Bsp Tor; And Notes: I. The Address For Submission Of Actual Sample Is Gate 5, Bangko Sentral Ng Pilipinas, A. Mabini Corner P. Ocampo Sr. Sts., Malate, Manila 1004. Ii. As Social Distancing Measure, Suppliers Can Leave Their Samples/documents In The Designated Box At Gate 5 Reception Lobby And Have These Acknowledged Thru The Time And Date Stamp Machine Stationed In The Same Location. If Submittals Are Assessed To Be Compliant, The Final Specifications (items A To E And Two (2) Additional Features Specified In Item F Of Section 1 Of The Bsp Terms Of Reference) Shall Be Disclosed To The S/lcq. The S/lcq Shall Submit Within Seven (7) Calendar Days, After Disclosure By Osmb Of The Final Specifications To The S/lcq, The Prototype Sample Of Its Offer For Further Evaluation. The S/lcq Shall Rectify/correct The Workmanship Defects That Are Not Compliant With The Specifications And Shall Submit Within Three (3) Working Days Upon Receipt Of Notification The Rectified Prototype Sample. Failure Of The Bidder To Submit The Rectified Sample Within The Prescribed Period, Or Within Bsp Specifications/standards Shall Be A Ground For Said S/lcq’s Post-disqualification. B.6 Certificate Of Satisfactory Delivery Of Product/service Issued To The Bidder Within The Last Five (5) Years By A Previous Client From Any Of The Following: I. Government Agency, Including Bsp; Or Ii. Globally – Or Locally-known Brand/company Included In Fortune 1000, Forbes, Barron’s, Or Superbrands List; Or Iii. Commission On Higher Education-listed Educational Institutions. 5. The Scanned Actual Signature Of The Authorized Representative Of The Prospective Bidder, Cropped And Pasted Handwritten Signatures, Adobe-created Signatures, Unique Figures And Symbols And Stamped Signatures Are Acceptable As E-signatures. Provided, That Original Documents Not Using Digital Signatures Shall Be Transmitted During Contract Execution. However, Text-typing The Name Of The Bidder And/or The Words “sgd. Or Original Signed” And The Like Without Distinctive Features Are Not Acceptable. 6. The Bsp Assumes No Responsibility Whatsoever To Compensate Or Indemnify Any Supplier For Expenses Incurred In The Preparation Of Quotations/proposals. 7. The Bsp Reserves The Right To Reject The Quotations/proposals Or Not Award The Contract And Makes No Assurance That A Contract Shall Be Entered Into As A Result Of This Request. 8. The Bsp May Suspend The Conduct Of Procurement Activities Adversely Affected Or Interrupted By The Declaration Of A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions At Any Time During The Existence Of Such Calamity, Or Quarantine Or Similar Restrictions, And When It Has Assessed Or Determined That: (a) No Supplier Will Be Able To Submit A Quotation/proposal Or Comply With The Requirements Of The Procurement Rules Due To The Limitations Resulting From The Declaration Of A State Of Calamity, Or Implementation Of A Community Quarantine Or Similar Restrictions; Or (b) Conduct Of Procurement Activities Cannot Be Undertaken Without Endangering The Health And Welfare Of Its Personnel Despite The Work From Home Or Other Alternative Work Arrangements. 9. The Bsp May Cancel Or Terminate The Conduct Of Procurement Activities, For Any Justifiable Reason, Such As But Not Limited To: (a) Physical And Economic Conditions Have Significantly Changed So As To Render The Project No Longer Economically, Financially, Or Technically Feasible, As Determined By The End-user Unit; (b) Project Is No Longer Necessary As Determined By The End-user Unit; (c) Source Of Funds For The Project Has Been Withheld Or Reduced Through No Fault Of The Bsp; Or (d) Brought About By The Declaration Of A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions (sec. 35.6 Of The 2016 Revised Irr). 10. The Bsp May Declare Failure Of Bidding/procurement Based On Its Assessment And Review Of All Its Planned And Ongoing Procurement Pursuant To Section 1 Of Gppb Resolution No. 09-2020. 11. The Bsp Aims To Ensure That Only Vendors/suppliers With Known Experience And Proven Capability On The Requirements Of The Particular Contract Should Continue To Participate In Bsp Procurement. Hence, In Line With Section 9(e) Of The 2016 Revised Irr Of R.a. No. 9184, The Bsp Evaluates The Performance Of Suppliers/vendors By Rating The Supplier’s Responsiveness To Bsp Specifications/terms Of Reference, Promptness Of Delivery, Quality Of Goods/services, And Offer’s Value For Money. Sgd Ma. Isabel N. Argueza Acting Manager Attachments: Bsp Quotation/proposal Form Bsp Terms And Conditions Bsp Terms Of Reference Bsp Supplied Evaluation Matrix Omnibus Sworn Statement Corporate Secretary’s Certificate/special Power Of Attorney

Details: Description Request For Quotation 1. The Bangko Sentral Ng Pilipinas Requests The Submission Of Quotations/proposals For The Following Requirement/s: Name Of The Requirement/brief Description/approved Budget For The Contract (abc): Supply And Delivery Of Various Office Supplies, As Per Bsp Minimum Technical Specifications: Lot No. Reference Description/qty. Abc, Inclusive Of All Applicable Taxes And Other Charges 1 Bac-ho Gs No. 2024-0150 Dated 27 December 2023 3,000 Pcs. Envelope, Letter, With Print Php26,220.00 2 Bac-ho Gs No. 2024-0151 Dated 27 December 2023 500 Pcs. Envelope, Documentary, With Print Php10,290.00 3 Bac-ho Gs No. 2024-0167 Dated 28 December 2023 500 Pcs. Envelope, Expanding, With Print Php28,985.00 4 Bac-ho Gs No. 2024-0166 Dated 28 December 2023 500 Pcs. Chicago Screw, 1.25” Php4,250.00 5 500 Pcs. Chicago Screw, 1.50” Php4,750.00 6 500 Pcs. Chicago Screw, 1.75” Php6,250.00 (quotations/proposals Exceeding The Abc Per Lot Shall Be Disqualified.) Delivery Period For All Lots : Within Forty-five (45) Calendar Days Reckoned From The Date Of The Execution Of The Purchase Order. Alternative Method Of Procurement : Negotiated Procurement – Small Value Procurement 2. All Particulars And Activities Relative To Eligibility Of Suppliers, Evaluation Of Quotations/proposals, Validation, And Award Of Contract Shall Be Governed By 2016 Revised Implementing Rules And Regulations Of Republic Act No. 9184 (2016 Revised Irr). Activity Schedule Details A. Issuance Of Rfq Starting 09 January 2024 Hard Copies Of Documents Are No Longer Issued For The Duration Of Community Restrictions B. Deadline Of Submission Of Quotations/ Proposals 12 January 2024; 12:00 N.n. Late Bids Shall Not Be Accepted. • Online Or Electronic Submission To The Following E-mail: A. Prmdi-dpc@bsp.gov.ph B. Guevarrarv@bsp.gov.ph Or • Physical Submission Of Hard Copy At Designated Bid Box For Delegated Procurement Located At Gate 3 Reception Lobby, Bangko Sentral Ng Pilipinas, A. Mabini Corner P. Ocampo Sr. Sts., Malate, Manila C. Opening Of Quotations/proposals How To Submit Quotation/proposal For Manual Submission: 1. Supplier’s Representative Or Courier Service Provider Shall Fill-up The Bid Submission Form (bsf) Available At The Gate 3 Reception Lobby. 2. Insert The Bsf (front Portion Facing Up) In The Time Stamp Machine Twice To Indicate The Time Of Submission Of The Quotation/proposal In The Bsf 3. Drop The Quotation/ Proposal In The Bid Box. As Precautionary Measure, Participating Suppliers Are Instructed To: 1. Wrap/enclose Bidding Documents With Plastic, Preferably Clear To Facilitate Disinfection/sanitation; 2. Submit Documents At Least Thirty (30) Minutes Before The Scheduled Deadline Of Submission To Allow Time For Possible Queuing Due To Conduct Of Thermal Scanning, And For Sanitation Of The Bid Envelope(s) And Transit Of The Documents To The Procurement Management Department Office. All Written Requests/queries: Procurement Management Department Room 212, 2nd Floor, 5-storey Building Bangko Sentral Ng Pilipinas A. Mabini Corner P. Ocampo Sr. Streets, Malate, Manila Fax No.: (+632) 8708-7115 E-mail: Prmdi-dpc@bsp.gov.ph Note: All Requests Shall Be In Writing And Addressed To The Director, Procurement Management Department I. 3. Submit The Properly Filled Up Quotation/proposal On Or Before The Deadline Set Above (use Bsp-prescribed Form). Suppliers Can Modify Or Withdraw Their Quotations/proposals At Any Time Before The Deadline For The Submission And Receipt Thereof; Provided, That They Send Another Quotation/proposal, Which Is Labelled As A “modification” Of The One Previously Submitted. Prospective Suppliers Shall Have The Option Of Submitting Quotations/proposals On Any Or All Lots And Evaluation And Contract Award Shall Be Undertaken On A Per Lot Basis. 4. The Supplier With The Single/lowest Calculated Quotation (s/lcq) Shall Submit The Following Requirements Within Five (5) Calendar Days From Receipt Of Notice From The Prmd. Failure To Submit The Requirements Within The Period Prescribed Shall Result In The Non-compliance Of The Supplier’s Quotation/proposal. A. Legal Documents: A.1 Philippine Government Electronic Procurement System (philgeps) Registration Number; A.2 Valid Mayor’s/business Permit; And A.3 Supplier’s Notarized Omnibus Sworn Statement (use Gppb Prescribed Form As Per Gppb Resolution No.16-2020) Together With The Notarized Proof Of Authorization (e.g., Secretary’s Certificate, Board/partnership Resolution, Or Special Power Of Attorney). Notes: I. If Bidding As A Joint Venture (jv), All Partners Must Submit The Above Documents; Ii. In Lieu Of The Mayor’s Permit And Philgeps Registration Number, The Philgeps Certificate Of Platinum Membership, Including Annex A, May Be Submitted, Provided That The Details Of The Mayor’s Permit Under Annex A Must Be Valid As Of Bidding Date; And Iii. For Individuals Engaged Under 53.9 Of The 2016 Revised Irr, Only The Bir Certificate Of Registration Shall Be Submitted In Lieu Of Dti Registration And Mayor’s Permit. B. Technical Documents: B.1 Valid Notarized Jv Agreement (jva), If Applicable. B.2 Bsp Terms And Conditions Duly Signed By The Supplier’s Authorized Representative On The Conforme Page. B.3 Bsp Minimum Technical Specifications Duly Signed By The Supplier’s Authorized Representative On The Conforme Page. B.4 For Lots 1-3: Submission Of Actual Sample As Per Specifications Stated In The Bsp Minimum Specifications If Submittals Are Non-compliant With The Technical Specifications, The S/lcq Shall Be Given Only One Chance To Submit A Rectified Sample Within Seven (7) Working Days From Receipt Of Notice Notes: I. The Soft Copy Of The Bsp Logo Shall Be Given To The Lowest/single Calculated Quotation Together With The Notice From Prmd I. Ii. The Address For Submission Of Actual Sample Is Gate 5, Bangko Sentral Ng Pilipinas, A. Mabini Corner P. Ocampo Sr. Sts., Malate, Manila 1004. Iii. As Social Distancing Measure, Suppliers Can Leave Their Samples/documents In The Designated Box At Gate 5 Reception Lobby And Have These Acknowledged Thru The Time And Date Stamp Machine Stationed In The Same Location. B.5 For Lots 4-6: Supplier’s Proof Of Offer Containing All The Technical Information Listed In The Attached Bsp-supplied Evaluation Matrix (bspsem) And Other Relevant Information Necessary For Validation. In Any Of The Following: I. Original Or Copy Of The Printed Product Brochure(s) From The Manufacturer; Or Ii. Printed Product Brochure(s) Downloaded From The Internet With Indication Of Its Source (e.g. Website). Or Iii. Picture With Technical Information; Or Iv. Actual Sample B.6 Bsp Supplied Evaluation Matrix (bspsem) Duly Accomplished By The Supplier’s Authorized Representative. Notes: I. Bidder Shall Indicate Under Column 2 The Specifications Of Its Actual Offer And Under Column 3, The Documents That Will Support Its Statement In Column 2. Ii. The Bspsem Need Not Be Signed By The Bidder’s Authorized Representative But Must Be Accomplished And Submitted As Per Schedule Indicated Above. 5. The Scanned Actual Signature Of The Authorized Representative Of The Prospective Bidder, Cropped And Pasted Handwritten Signatures, Adobe-created Signatures, Unique Figures And Symbols And Stamped Signatures Are Acceptable As E-signatures. Provided, That Original Documents Not Using Digital Signatures Shall Be Transmitted During Contract Execution. However, Text-typing The Name Of The Bidder And/or The Words “sgd. Or Original Signed” And The Like Without Distinctive Features Are Not Acceptable. 6. The Bsp Assumes No Responsibility Whatsoever To Compensate Or Indemnify Any Supplier For Expenses Incurred In The Preparation Of Quotations/proposals. 7. The Bsp Reserves The Right To Reject The Quotations/proposals Or Not Award The Contract And Makes No Assurance That A Contract Shall Be Entered Into As A Result Of This Request. 8. The Bsp May Suspend The Conduct Of Procurement Activities Adversely Affected Or Interrupted By The Declaration Of A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions At Any Time During The Existence Of Such Calamity, Or Quarantine Or Similar Restrictions, And When It Has Assessed Or Determined That: (a) No Supplier Will Be Able To Submit A Quotation/proposal Or Comply With The Requirements Of The Procurement Rules Due To The Limitations Resulting From The Declaration Of A State Of Calamity, Or Implementation Of A Community Quarantine Or Similar Restrictions; Or (b) Conduct Of Procurement Activities Cannot Be Undertaken Without Endangering The Health And Welfare Of Its Personnel Despite The Work From Home Or Other Alternative Work Arrangements. 9. The Bsp May Cancel Or Terminate The Conduct Of Procurement Activities, For Any Justifiable Reason, Such As But Not Limited To: (a) Physical And Economic Conditions Have Significantly Changed So As To Render The Project No Longer Economically, Financially, Or Technically Feasible, As Determined By The End-user Unit; (b) Project Is No Longer Necessary As Determined By The End-user Unit; (c) Source Of Funds For The Project Has Been Withheld Or Reduced Through No Fault Of The Bsp; Or (d) Brought About By The Declaration Of A State Of Calamity, Or Implementation Of Community Quarantine Or Similar Restrictions (sec. 35.6 Of The 2016 Revised Irr). 10. The Bsp May Declare Failure Of Bidding/procurement Based On Its Assessment And Review Of All Its Planned And Ongoing Procurement Pursuant To Section 1 Of Gppb Resolution No. 09-2020. 11. The Bsp Aims To Ensure That Only Vendors/suppliers With Known Experience And Proven Capability On The Requirements Of The Particular Contract Should Continue To Participate In Bsp Procurement. Hence, In Line With Section 9(e) Of The 2016 Revised Irr Of R.a. No. 9184, The Bsp Evaluates The Performance Of Suppliers/vendors By Rating The Supplier’s Responsiveness To Bsp Specifications/terms Of Reference, Promptness Of Delivery, Quality Of Goods/services, And Offer’s Value For Money. Sgd Leidy Zara Myeth B. Loreto Manager Attachments: Bsp Quotation/proposal Form Bsp Terms And Conditions Bsp Minimum Technical Specifications Bsp Supplied Evaluation Matrix Omnibus Sworn Statement Corporate Secretary’s Certificate/ Special Power Of Attorney

Details: This Is Not A Solicitation Announcement this Is A Request For Information Notice Of Intent To Sole Source this Request For Information (rfi) Is Intended For Information And Planning Purposes Only At This Time; And Shall Not Be Construed As A Solicitation Or As An Obligation On The Part Of The Department Of Veterans Affairs. Because This Is A Request For Information Announcement, No Evaluation Letters And/or Results Will Be Issued To The Respondents. This Sources Sought Notice Is For Market Research Purposes Only And Shall Not Be Considered An Invitation For Bids, Request For Quotations, Or A Request For Proposal. Do Not Submit A Proposal Or Quote. This Market Research Is Issued For Information And Planning Purposes Only And Does Not Constitute A Solicitation Nor Does It Restrict The Government As To The Ultimate Acquisition Approach. Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Additionally, There Is No Obligation On The Part Of The Government To Acquire Any Products Or Services Described In This Notice Of Intent To Sole Source. You Will Not Be Entitled To Payment For Direct Or Indirect Costs That You Incur In Responding To This Sources Sought Notice. Any Contract That Might Be Awarded Based On Information Received Or Derived From This Market Research Will Be The Outcome Of A Competitive Process. Interested Parties Are Responsible For Adequately Marking Proprietary, Restricted Or Competition Sensitive Information Contained In Their Response. No Solicitation Exists. Therefore, Do Not Request A Copy Of A Solicitation. statement Of Need for Bioness Integrated Therapy System Upgrade At department Of Veterans Affairs wilmington Va Medical Center 1. Introduction/background: 1.1. The Wilmington Va Medical Center (wilmington Vamc) Currently Has A New Requirement For Upgrading The Current Bits (bioness Integrated Therapy System) From That Of 2.0 To 3.0. This Will Increase Our Current Bioness Integrated Therapy System (bits ) Software Application From Five (5) Different Therapy Categories To Seven (7) And From 24 Customizable Programs To 68 All Designed To Evaluate And Improve Abilities In Individuals With Disabilities Resulting From Traumatic Injuries And Movement Disorders As Well As Improve Performance In Competitive Athletes. Several Bits Programs Require Visual Scanning To Enhance Detection Of Targets In Complex Arrays And In The Central And Peripheral Fields Of Vision. The Upgrade Package Comes With Hardware To Further Enhance The Ability To Test And Treat Balance Deficits. The Hardware Includes: 2 Sensors, 5 Chest Straps, A Motion Sensor And Balance Platform. 1.2. Minimizing Risk Of Patient Falls Can Save A Substantial Amount In Costs And Improve The Standard Of Care. The Bits Can Accomplish More With A Single Session And Demonstrate Outcomes Over Time And Can Help Patients Combine Balance With Cognitive Tasks To Challenge Both Static And Dynamic Balance Control. Bits Versatility Also Allows Clinicians To Track Patient S Movements During Balance Exercises Using A Body Worn Motion Sensor Or Balance Platform That Detects Posterior, Anterior, And Lateral Movements. Personalize And Configure Balance Training Sessions For Patients At Every Level Of Mobility Throughout Their Rehabilitation. 2. Scope: 2.1. The Department Of Veterans Affairs, Wilmington Va Medical Center Hereby Referred To As Wvamc Is Seeking The New Acquisition As An Addition To Our Currently Owned Equipment Of Brand Name Only Bioness Integrated Therapy System. 2.2. This Need For This Acquisition Is Determined To Be Routine And Can Be Awarded Within Designated Contracting Timeframes 3. Requirement: 3.1. Salient Characteristics For Brand Name Bits 2.0 To 3.0 Upgrade 3.1.1. Must Be Compatible And Work With Current Bits System That Is Already In Place And In Use. 3.1.2. Be A Portable Unit That Can Be Easily Moved From One Treatment Room To Another. 3.1.3. Increase Current System Capability From 24 Programs To 68 Programs 3.1.4. Increase Current System Capability From 4 Assessments To 10 Assessments To Include: 3.1.4.1. Berg Balance Scale; Romberg Test; Sensory Integration Test; Static Postural Sway; And Dynamic Postural Sway 3.1.5. Include Hardware Accessories Of: 3.1.5.1. Intel Nuc Pc With Faster Processing 3.1.5.2. 2 Sensors That Can Work Either On The Platform Or Be Worn By The Patient And Can Track Movements During Balance Exercises To Include Posterior, Anterior, And Lateral Movements 3.1.5.3. 5 Various Size Chest Straps 3.1.5.4. A Balance Platform 3.1.5.5. Single-use Starter Patches (pack Of 48) 3.1.5.6. Include An Extended 2 Yr Warranty. 4. Information Security: the Vendor Will Not Have Any Access To Sensitive Va Information. The C&a Requirements Do Not Apply, And That A Security Accreditation Package Is Not Required. 5. Delivery: 5.1. Delivery Shall Be Coordinated With The Cor And Or Facility Within 30 Days After Receipt Of Contract. Deliver Equipment To: delivery Needs To Be Made To The Rehabilitation Department At The Dover Cboc dover Va Cboc 655 S. Bay Rd Unit 3c Rm 203 dover, De 19901 5.2. Upon Delivery, The Contractor/vendor Agrees To Work With Facility Personnel In Order To: 5.2.1. Conduct A Joint Inventory Of Goods By Material Number, Quantity, And Serial Number 5.2.2. De-palletize Shipment, Unbox, And Stage Products 5.2.3. Unbox And Assemble 5.2.4. Dispose Of Waste Packaging 5.2.5. Register Device Warranty If Required 5.2.6. Perform Ground Continuity Checks, Leakage Current, And Power-on Tests As Required. 5.2.7. Affix Customer Provided Asset Tags If Required 5.2.8. Perform Device In-service 5.3. The Government And The Contractor Understand And Agree That The Services To Be Delivered Under This Contract By The Contractor To The Government Are Non-personal Services And The Parties Recognize And Agree That No Employer-employee Or Master-servant Relationships Exist Or Will Exist Under The Contract Between The Government And The Contractor S Employees. instructions the Information Identified Above Is Intended To Be Descriptive, Of The Brand Name Only Bioness Bit-3155 Bits Balance Upgrade, With The Bits 2-year Extended Warranty, Are To Indicate The Quality Of The Supplies/services That Will Be Satisfactory. It Is The Responsibility Of The Interested Source To Demonstrate To The Government That The Interested Parties Can Provide The Supplies/services That Fulfill The Required Specifications Mentioned Above. responses To This Rfi Should Include Company Name, Address, Point Of Contact, Phone Number, And Point Of Contact E-mail, Duns Number, Cage Code, Size Of Business Pursuant To North American Industrial Classification System (naics) 334510. please Answer The Following Questions: (1) Please Indicate The Size Status And Representations Of Your Business, Such As But Not Limited To: Service-disabled Veteran Owned Small Business (sdvosb), Veteran Owned Small Business (vosb), Hubzone, Woman Owned Small Business (wosb), Large Business, Etc.)? (2) Is Your Company Considered Small Under The Naics Code Identified Under This Rfi? (3) Are You The Manufacturer, Distributor, Or An Equivalent Solution To The Items Being Referenced Above? (4) If You Are A Large Business, Do You Have Any Designated Distributors? If So, Please Provide Their Company Name, Telephone, Point Of Contact And Size Status (if Available). (5) Describe How Your Small Business Takes Ownership Of The Equipment In The Manufacturing, Assembly, Or Delivery Process. (6) If You Re A Small Business And You Are An Authorized Distributor/reseller For The Items Identified Above Or An Equivalent Solution, Do You Alter; Assemble; Modify; The Items Requested In Any Way? If You Do, State How And What Is Altered; Assembled; Modified? (7) If You Intend To Subcontract Any Work On This Contract, What Portion Of The Total Cost Will Be Self-performed/will Be Performed By Your Organization? Please Provide Estimated Detailed Percentage Breakdowns Related To Subcontracted Work And Completion Of Job. (8) Does Your Company Have An Fss Contract With Gsa Or The Nac Or Are You A Contract Holder With Any Other Federal Contract? If So, Please Provide The Contract Number. (9) If You Are An Fss Gsa/nac Contract Holder Or Other Federal Contract Holder, Are The Items/solution You Are Providing Information For Available On Your Schedule/contract? (10) General Pricing Of Your Products/solution Is Encouraged. Pricing Will Be Used For The Purpose Of Market Research Only. It Will Not Be Used To Evaluate For Any Type Of Award. (11) Please Submit Your Capabilities Regarding The Brand Name Equipment. (12) Please Review Salient Characteristics/statement Of Work (if Applicable) And Provide Feedback Or Suggestions. If None, Please Reply As N/a. this Intent To Sole Source Notice Rfi (request For Information) Will Be Conducted In Accordance With Federal Acquisition Regulation (far) Part 13. Responses Must Be Received Via E-mail To Andrew.taylor3@va.gov No Later Than 4 Pm Eastern Standard Time (est) On Thursday, February 5, 2024. This Notice Will Help The Va In Determining Available Potential Sources Only. Reference 36c24423q0635 In The Subject Of The Email Response. do Not Contact Va Medical Center Staff Regarding This Requirement, As They Are Not Authorized To Discuss This Matter Related To This Procurement Action. All Questions Will Be Addressed By The Contracting Specialist, David Santiago. all Firms Responding To This Request For Information Are Advised That Their Response Is Not A Request For Proposal, Therefore Will Not Be Considered For A Contract Award. if A Solicitation Is Issued, Information Will Be Posted On The Beta.sam Web Site For All Qualified Interested Parties At A Later Date And Interested Parties Must Respond To This Intent To Sole Source Notice To Be Considered For A Set-aside. This Notice Does Not Commit The Government To Contract For Any Supplies Or Services. The Government Will Not Pay For Any Information Or Administrative Cost Incurred In Response To This Request For Information. Information Will Only Be Accepted In Writing By E-mail To Contracting Specialist At David.santiago2@va.gov disclaimer this Rfi Is Issued Solely For Information And Planning Purposes Only And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked As Proprietary Will Be Handled Accordingly. Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi. end Of Document

Details: Description 3 Unit Laptop 149,985.00 Technical Specifications 1.processor: A.cpu Architecture Technology: Processor Model Should At Least Be The Latest Release B. Speed Frequency: 2.2 Ghz, Up To 4.6 Ghz C. Cores: 2 10 Cores D. Cache: 2 12mb Lb Cache 2. Operating System: A. Type: Latest Stable Proprietary Os 64~bit B. Version: Professional Version (must Have The Capability To Join Active Directory) C. A Certificate Ofauthenticity (goa) Genuine Label Or Equivalent Ofthe License From The Os Provider Should Be Provided (holographic Image Sticker) 3. Office Productivity Software: A. Type: Latest Stable Proprietary Ops For Corporate Application Perpetual B. Version: Business, Inclusive Ofword Processor, Spreadsheet, Presentation Scamp; Email For Offline Use 4. Memory: 3. Capacity: 28 Gb Ddr4 B. Speed: Ddr4 - 2 3200mhz 5. Keyboard: Built-in 6. Pointing Devices/mouse: A. Type: Touchpad With Multi-gesture And Scrolling Function And Inclusive Of Standard Optical Mouse Usb (mouse Should Be The Same Brand Of The Laptop Being Offered) 7. Graphics Controller: Integrated 8.1/0 Ports: All Ports Should Be Integrated/built-in (no Conversations/extension/adapters Except On Ethernet Lan) A. 2 2 X Usb 3.0 Port B. 1 X Headphone / Microphone Or Combo Jack C. 1 X Rj-45 Lan (conversion Accepted) (i. 1 X Hdmi E. 1 X Type-c Port 9. Display: 39.6 Cm (15.6 & Quot; Diagonal, Fiid (1920 X 1080), Micro-edge, Anti-glare, 250 Nits, 45% N'i‘sc With A Built-in Webcam 10. Hard Drive: 2 512gb Pcie Nvme M2 550 11. Sound Controller: Integrated/buiit-in High Definition Audio System 12. Weight: 2 1.59 Kg. Including Battery 13. Communication: Must Be Integrated / Built- In (no Usb Conversion/extension/adapters) A. Wireless - Integrated Dual Band Wireless - 802.11 Ac/a/b/g/n; Bluetooth 4.0 B. Ethernet - Integrated 10/100/1000 Base-tx 14. Battery: Up To 7 Hours And 45 Minutes 15. Carrying Case: Laptop Bag (same Brand As The Offered) 16. Warranty Scamp; Sla A. Three (3) Years Hardware Warranty B. One (1) Year On Mouse C. Salt; 4 Hours' Response Time For Issues Reported (thru Help Desk) D. A Service Unit Must Be Issued For A Unit That Can't Be Repaired Within The Day E. For Reported Hardware Replacement, The Service Provider Shall Be One To Pull Out The Unit 17. To Protect Dswd From Unreliable And Unproven Products The Following Is Required: A. Proposed Brand Should Be Iso 9000 Certified Or Better B. Proposed Brand Should Be Energy Star Compliant Or Equivalent C. Proposed Brand Should Have An Existing Technical Web Support System Where The Brand Providers/bidders Can Log-in And Key-in Product Service Codes/ Item Codes For Faster Tracking Of Defective / Rma Products And Faster Turn-around Oftechnical Support. D. Proposed Brand Is An International Brand Name, Which Means That The Brand Is Known And Marketed Globally And Has An International Presence (physical Stores, Centers, Or Satellite Offices) In At Least 5 Countries. Further, The Brand Should Be Sold And Marketed Continuously In The Philippines For The Last Ten (10) Years. E. Manufacturers Offered Model Should Be Available In The Market And Should Not Be Custom-made Or Made To Order Just To Comply With The Specification. 18. Delivery Period: 45 Calendar Days 19. Srp Not More Than: Php 49,995.00 /unit 1 Unit Printer 45,020.00 Technical Specifications Printer Type: Print, Scan, Copy, Fax With Adf Printing: Precision Coretm Printhead 800 X 1 Nozzles Black, 256 X 1 Nozzles Per Colour (cyan, Magenta, Yellow) Bi-directional Printing 4800 X 2400 Dpi 3.8 Pl Up To 32.0 Ppm / 22.0 Ppm Simplex: Up To 25.0 Ipm/12.0 Ipm/duplex: Up To 16.0 Ipm / 9.0 Ipm Simplex: Up To 13.5 Ipm / 6.0 Ipm / Duplex: Up To 10.0 Ipm / 5.0 Lprn Simplex: Up To 5.5 Sec / 8.5 / Duplex: Up To 11 Sec/ 17 Sec. Approx. 43 Sec Per Photo (border) / 52 Sec Per Photo (borderless) Esc/p-r, Esc/p Raster Yes (up To A3) Copying: Simplex: Up To 23.0ipm/10.0 Ipm Simplex: Up To 22.5ipm/10.0 Ipm Duplex: Up To 15.5 Ipm / 7.5 Ipm 999 Copies 25-400% 600 X 600 Dpi A3 Scanning: Flatbed Colour Image Scanner C15 1200 X 2400 Dpi 297 X 431.8 (mm) 48-bit Input, 24bit Output 16-bit Input, 8-bit Output 16-bit Input, 1-bit Output Flatbed: 5 Sec / Adf (simplex / Duplex): Up To 26.0 Ipm/11.5 Ipm Flatbed: 10 Sec / Adf (simplex / Duplex): Up To 9.0 Ipm / 6.0 Ipm Adf Function: 64-95 G/m2 50 Sheets Card Slot/ Usb Host Function: Usb Memory Paper Handling: Friction Feed 3 (front 2, Rear 1) Cassette 1: 250 Sheets For A4 Plain Paper (80 G/mz), 50 Sheets For Premium Glossy Photo Paper Cassette 2: 250 Sheets For A4 Plain Paper (80 G/mz) Rear Slot: 50 Sheets For A4 Plain Paper (80 G/mz), 20 Sheets For Premium Glossy Photo Paper 125 Sheets For A4 Plain Paper (80 G/mz), 20 Sheets For Premium Glossy Photo Paper A3, Super B (13 X 19"), Indian Legal, Letter, A4, 16k (195 X 270mm), 8k (270 X 390mm), Executive (7.25 X 10.5") 84, 85, A5, B6, A6, 8.5 X 13", 5 X 7", 4x6", 8x10", Legal (8.5 X 14"), 16.9 Wide, Envelope: #10, Dl, C6, C4 329 X 6000mm 3mm Top, Left, Right, Bottom Via Custom Settings In Printer Driver Fax Function: Walk-up Black-and-white And Colour Fax Capability 6mb, Page Memory Up To 550 Pages Itu-t T.30 Up To 33.6 Kbps, Approx. 3 Sec/page Up To 200 X 200 Dpi A5, A4, A3, Bs, B4, Half Letter, Letter, 11 X 17" A5, A4, A3, B5, B4, Halfletter, Legal, 11 X 17" Half Letter, A5, B5, A4, Letter, Legal, B4, 11x17", A3, A3+ Up To 200 Numbers, 199 Groups Pc Fax (transmission/receive), Automatic Redial, Address Book, Broadcast Fax (mono Only), Transmit Reservation, Polling Reception, Fax Preview, Memory L Reception, Fax To Email, Fax To Folder, Automatic 2- Sided Fax Interface: Usb 2.0 Ethernet, Wi-fi Ieee 802.11b/g/n, Wi~fi Direct Tcp/va4,tcp/1pv6 Snmp, Li'i‘tp, Diicp, Bootp, Apipa, Ping, Ddns, Mdns, Sntp, Slp, Wsd, Lltd I Mobile And Cloud Printing: Epson Iprint, Epson Email Print, Remote Print Driver, Scan To Cloud Apple Aiprint, Mopria Print Service Electrical Specifications: Ac 220-240 V 50-60 Hz 19.0 W 9.1 W 0.8 W 0.2 W Noise Level: Sound Power (black / Colour) 6.7 B(a) / 6.2 B(a), Sound Pressure (black / Colour) 52 Db(a) / 47 Db (a) Consumables: Black Ink Bottle — 008 Cyan Ink Bottle Magenta Ink Bottle Yellow Ink Bottle 1 Unit Desktop 49,995.00 Technical Specification Operating System: Operating System 64-bit Processor & Chipset Processor Type - Core'"i5 Processor Model - Intel® Core" I5-124op Processor Speed - 1.7 Ghz Processor Speed (turbo) - 4.4 Ghz Cache — 12mb Cache Memory: Built-in Memory - 1 Standard Memory- 8 Gb Maximum Memory - Up To 3268 Memory Technology — Ddr4 Sdram Memory Card Reader - No Storage: Number Of Hard Drives - 1 Total Hard Drive Capacity - 1 Tb Total Solid-state Drive Capacity — 256 Gb Solid State Drive Interface - Nvme Ssd Optical Drive Type — No Display 8: Graphics: Screen Size - 60.5 Cm (23.8") Display Screen Technology - Led Touchscreen — No Multi-touch Screen - No Screen Resolution — 1920 X 1080 Graphics Controller Manufacturer - Intel® Graphics Controller Model — Iris X3 Graphics Audio: Speakers - Yes Network & Communication: Wireless Lan — Yes Wireless Lan Standard - Ieee 802.1lax/ac/a/b/g/n Ethernet Technology — Gigabit Ethernet I / O Expansions: Number Ofm.2 Slot - 2 Interfaces/ Ports Hdmi - Yes Usb — Yes Number Of Usb 2.0 Ports — 1 Number Of Usb 3.2 Gen 2 Port — 3 Number Ofusb 3.2 (type-c) Ports - 1 Input Devices: Pointing Device Type - Usb Wired Mouse Keyboard Included — Yes Keyboard Type - Usb Wired Keyboard Software: Featured Software — Ms Office For Home 8: Student Power Description: Power Supply - 65w Physical Characteristics: Height— 51.8 Cm Width — 62.6 Cm Depth 18.6 Cm Warranty: Warranty - 2 Years Warranty