Tenders of Offizielle Bezeichnung

Contract notice – General guideline, standard arrangements Negotiated procedure with prior publication of a call for competition/negotiated procedure (supplies) 120-litre waste and recycling container Colour: grey, manufactured from HDPE plastic, maximum recycled content Indication is required. Minimum wall thickness: approx. 4.0 mm (+/- 0.2 mm) Alternatively: approx. 3.0 mm (+/- 0.2 mm In the 120-liter container ... Multi-color: gray, made from HDPE plastic, maximum recycled content. Information is required. Minimum wall thickness: approx. 4.0 mm (+/- 0.2 mm) Alternatively: approx. 3.0 mm (+/- 0.2 mm In the 120-liter containers, the subsequent installation of 60-liter inserts must be possible. Matching identification plates for the lids of the 120-liter and 240-liter waste containers in the RAL colors gray, yellow, blue and brown. For cost-saving container labeling for direct recognition of a waste fraction, alternative offers are permitted under the following conditions: The bidder can alternatively offer a comparable lid labeling system. The intention is to achieve cost-effective and Convenient re-declaration of a waste container to a different waste fraction at the customer's location. The lid identification labels must be clearly visible to the workers under adverse visibility conditions. A minimum area of significantly more than 120 cm² is required here. This area can be represented by a monoclip or a maximum of 2 single clips. Transponder assembly Each container is factory-fitted with an RFID transponder chip R134ftread-only 134.2 Khz. FDX, DIN and BDE compliant (without barcode sticker) and to be supplied. 240-liter waste and recyclables container Color: gray, made from HDPE plastic, maximum recycled content specification is required. Minimum wall thickness: approx. 4.0 mm (+/- 0.2 mm) Alternatively: approx. 3.0 mm (+/- 0.2 mm The subsequent installation of 60 liter inserts must be possible in the 120 liter containers. Matching identification plates for the lids of the 120 liter and 240 liter waste containers in the RAL colors gray, yellow, blue and brown. For cost-saving container labeling for direct recognition of a waste fraction, alternative offers are permitted under the following conditions: The bidder can alternatively offer a comparable lid labeling system. The intention is the cost-effective and convenient re-declaration of a waste container to another waste fraction at the customer's location. The lid labeling plates must be clearly visible to the workers under adverse visibility conditions. A minimum area of significantly more than 120 cm² is desired here. This area can be covered by a monoclip or by a maximum of 2 Single clips are shown. Transponder assembly Each container is factory-fitted with an RFID transponder chip R134ftread-only 134.2 Khz. FDX, DIN and BDE compliant (without barcode sticker) and delivered.

Contract notice – General guidelines, Standard regime Negotiated procedure with prior publication of a call for competition/negotiated procedure (services) Transport and lifting on inclined planes and platform Transport and lifting of 18 components on inclined planes and platform.

Contract notice – General Directive, Standard Regulation Open procedure (supplies) Airway management Delivery of 12 ventilators including accessories Other medical devices Delivery of 12 each of measuring devices, syringe pumps and suction pumps

Contract notice – General guideline, standard regulation Open procedure (supplies) Procurement of six rescue firefighting vehicles Hlf 20 - chassis and body Procurement of six (6) rescue firefighting vehicles (hlf 20) in accordance with DIN EN 1846 Part 1-3 and DIN 14530-27

Contract notice - General guideline, standard rule Open procedure (construction work) Interior doors 70-00006-3000-19a "* Dates for implementation of the main work on the construction site: Start of work 03.02.2025; End of work 03.06.2025 * Description of the procurement: Approx. 31 interior doors, solid chipboard, plastic coating. ... More"* Dates for implementation of the main work on the construction site: Start of work 03.02.2025; End of service 03.06.2025 * Description of procurement: Approx. 31 pieces of interior doors, solid chipboard, plastic coating, approx. 610/2110mm Approx. 13 pieces of interior doors, solid chipboard, plastic coating, approx. 735/2110mm Approx. 2 pieces of interior doors, solid chipboard, plastic coating, approx. 860/2110mm Approx. 12 pieces of interior doors, solid chipboard, plastic coating, approx. 860/2235mm Approx. 31 pieces of interior doors, solid chipboard, plastic coating, approx. 985/2235mm, R´w>37 Db Approx. 7 pieces of interior doors, solid chipboard, plastic coating, approx. 985/2235mm Approx. 1 piece of interior doors, solid chipboard, plastic coating, approx. 1335/2235mm Approx. 2 pieces of interior doors, solid chipboard, 2-wing, approx. 985/2485mm approx. 1 interior door, solid chipboard, plastic coating, approx. 735/1985mm approx. 13 shaft doors T90-1, approx. 885/226 mm approx. 5 all-glass doors, approx. 834/2,232 mm, frame MW approx. 280 mm approx. 11 all-glass doors, approx. 959/2,232 mm, frame MW approx. 280 mm approx. 17 all-glass doors, approx. 834/2,232 mm, frame MW approx. 125 mm approx. 94 all-glass doors, approx. 959/2,232 mm, frame MW approx. 125 mm approx. 35m² foiling, all-glass doors, full surface approx. 315m Foiling, all-glass doors, 959 mm, stripes, 120 mm"

Contract notice - General guideline, standard rule, open procedure (construction work) Ve 300-091 Core drilling and concrete sawing work The subject of the contract is the execution of core drilling and concrete sawing work on walls and ceilings in the new building of the International Accelerator Center for Research with Ions and Antiprotons, including accompanying work such as corrosion protection of drill holes in reinforced concrete components, scaffolding work and the implementation of protective measures during the provision of the service. The main services are: - Approx. 14,500 cm core drilling on walls, made of masonry, component depth up to approx. 80 cm, diameter from approx. 25 mm to 1,000 mm - Approx. 11,000 cm core drilling on walls, made of concrete and reinforced concrete, component depth up to approx. 80 cm, diameter from approx. 25 mm to 1,000 mm - Approx. 6,500 cm core drilling on ceilings, made of reinforced concrete, component depth up to approx. 80 cm, diameter from approx. 25 mm to 1,000 mm - Approx. 80 m² concrete sawing work on walls, made of concrete and reinforced concrete, component depth from approx. 15 to 60 cm, opening size from approx. 1,000 cm² to 50,000 cm² - Approx. 200 cm² cutting through Reinforcing steel, individual cross-sectional area over 2.0 cm² - approx. 450 m² protective cover made of foil, for floor, wall and ceiling

Contract notice – General guideline, standard regulation Open procedure (construction work) Renovation of Landgrafenschloss_refrigeration systems Refrigeration systems According to specifications

Contract notice – general guidelines, standard rules Open procedure (services) Oberweyer road maintenance department Carrying out maintenance cleaning over a total annual cleaning area of approx. 22,760 m² (full cleaning: 13,160 m²; visual cleaning: approx. 9,600 m²) for the Oberweyer road maintenance department – in the responsibility of Hessen Mobil. The lot also includes 4 x annual glass and frame cleaning on an area of approx. 168 m² clear shell dimensions as well as the following services to be carried out once a year, which may be commissioned on a pro-rata basis and only if required: - basic cleaning of linoleum on an area of 176.80 m², - basic cleaning of epoxy resin on an area of 15.08 m² as well as - basic cleaning of tiles on an area of 65.27 m². Road maintenance depots Lauterbach, Grebenhain, Nidda, Wächtersbach Carrying out maintenance cleaning over a total annual cleaning area of approx. 49,160 m² (full cleaning: 34,513 m²; visual cleaning: 14,647 m²) for the road maintenance depots Grebenhain, Lauterbach, Nidda Wächtersbach as well as the winter base Birstadt, - under the responsibility of Hessen Mobil. The lot also includes 4x annual glass and frame cleaning on an area of approx. 336 m² clear shell dimensions as well as the following services to be carried out once a year, which may be commissioned on a pro-rata basis and only if required: For the Lauterbach road maintenance department: - basic cleaning of linoleum on an area of 191.29 m², - basic cleaning of tiles on an area of 165.97 m² as well as - basic cleaning of stone floors on an area of 20.50 m² For the Grebenhain road maintenance department: - basic cleaning of linoleum on an area of 122.14 m² - basic cleaning of stone floors on an area of 39.54 m² as well as - basic cleaning of tiles on an area of 94.87 m². For the Nidda road maintenance department: - basic cleaning of linoleum on an area of 142.25 m², For the Wächtersbach road maintenance department: - basic cleaning of linoleum on an area of 136.77 m², - basic cleaning of artificial stone on an area of 30.09 m² and - basic cleaning of tiles on an area of 133.50 m². Homberg road maintenance department: carrying out maintenance cleaning over a total annual cleaning area of approx. 13,240 m² (full cleaning: 9,860 m²; visual cleaning: approx. 3,380 m²) For the Homberg/ohm road maintenance department - under the responsibility of Hessen Mobil. The lot also includes 4 x annual glass and frame cleaning on an area of approx. 51 m² clear shell dimensions as well as the following services to be carried out once a year, which may be commissioned pro rata and only if required: - basic cleaning of linoleum on an area of 158.20 m², - basic cleaning of artificial stone on an area of 25.40 m² and - basic cleaning of tiles on an area of 129.70 m².

Contract notice - general guideline, standard rule open procedure (construction work) Jahnschule Hünfeld, conversion and modernization - drywall work The district committee of the Fulda district, represented by the building management department, intends to convert and modernize the Jahnschule Hünfeld. The focus of the measures is the fundamental renewal of the technical building equipment and the internal reorganization of functional areas and usage units. Furthermore, the extension of the building with a single-storey extension and a barrier-free elevator is planned. In principle, the technical building equipment will be renewed in the entire building as well as in large parts of the interior surfaces (suspended ceilings, floor coverings, wall coverings, etc.). The measures described on the building must be carried out in parallel with ongoing school operations. For this purpose, the entire project is divided into four construction phases, of which two construction phases (2nd phase + 3rd phase) take place at the same time. The subject of this service description is the drywall work of the 2nd and 3rd construction phases. Essentially, the following types of work are to be carried out: - Construction of non-load-bearing partition walls and facings - Construction of casings for installation lines - Construction of insulated facings for window parapets - Construction of fire protection cladding for steel components - Construction of self-supporting fire protection ceilings - Construction of suspended ceilings with mineral panels, plasterboards and acoustic panels

Contract notice – Sector directive, standard regulation Open procedure (construction work) Civil engineering work, renovation of the Königstor rectifier substation Since extensive reconstruction and renovation measures are planned for the buildings and areas at the Königstor group site in the near future and therefore installation at a permanent location on the site is not possible, the rectifier substation is to be erected as a temporary solution in a container. Part of this tendering procedure are the civil engineering work required to implement the project, as well as concrete, reinforced concrete and steel construction work for the support or to make the container accessible. To connect the rails (current return) to the new rectifier substation, a cross-over into the existing line on the Kvv site is planned. The following services are to be provided: soil excavation approx. 200 m³, paving and slab work approx. 165 m², concrete work foundations and supports approx. 12 m³, supply and installation of empty cable pipes approx. 150.00 m, drainage, installation of 6-part trench, associated demolition, steel construction and drainage work and the installation of cable shafts, the total scope of the civil engineering and road construction work is shown in the attached site plan. Pure cable laying, connection or cable pulling work are not part of this tendering process.