Heater Tenders

Details: Description 1 Unit Rice Cooker, 7.8l/45 Cups Capacity (heavy Duty) 1 Unit Rice Cooker, 4.5l/23 Cups Capacity (heavy Duty) 1 Unit Rice Cooker, 3.6l/20 Cups Capacity (heavy Duty) 2 Pcs Karaha With Cover (big), 138cm Diameter, Heavy Duty 2 Pcs Kaldero (big), 45cm Daimeter, 40cm Height 4 Pcs Mixing Bowl, Stainless Steel, 32cm Diameter 2 Pcs Non-stick Frying Pan, 30 X 18cm, Heavy Duty 5 Pcs Food Tray, Big 5 Pcs Casserole With Cover, 33cm Diameter, 21cm Height 5 Pcs Casserole With Cover, 29cm Diameter, 19cm Height 5 Pcs Kitchen Tongs, 12 Inches 5 Pcs Laddle With Long Handle 3 Pcs Stainless Steel Skimmer, Long Handle 3 Pcs Mallet Tenderizer, Stainless, Big 20 Pcs Can Opener, Heavy Duty 5 Pcs Knife Set, 6 In 1, Heavy Duty 5 Pcs Chopping Board, Big, Heavy Duty 10 Pcs Kitchen Mutifunctional Slicer, Heavy Duty 10 Pcs Kitchen Peelers 10 Pcs Plastic Cups 10 Pcs Serving Spoons, Stainless 5 Pcs Pitcher, 2l Capacity 2 Doz Drinking Glass, Transparent, 370ml 2 Doz Soup Bowl, 15cm 2 Doz Ceramic Cup And Saucer, 150ml 300 Pcs Plastic Reusable Plates W/ 3 Division & Cover (rectangle) 50 Pcs Stainless Food Tray With Cover 3 Division 3 Unit Blender, Osteorizer, 8 Speed, Heat Resistant Glass 50 Pcs Pot Holder 5 Pcs Kitchen Scissors, Big, Heavy Duty 2 Pcs Stainless Steel Whistling Kettle, 5.8l Capacity 5 Pcs Thermos, Large Capacity, Long Lasting Heat Preservation 20 Pcs Doormat 3 Unit Gas Stove, Double Burner 2 Unit Weighing Scale, 20kls 1 Unit Kitchen Dish Sterilizer, 5.9 Cubic Feet, Floor Type 1 Unit Spoon And Fork Heater And Sterilizer, 2 Holes 10 Pcs Vegetable Tray 3 Pcs Strainer With Tray, Stainless 12 Pcs Kitchen Deep Basin, Stainless, 45cm X 2cm

Details: South Lanarkshire Council's Roads And Transportation Services Requires Inspection, Service, Maintenance & Repair Of Portable Gas Appliances Such As Hand Torches, Road Lining Prams, Mushroom Burners, Tar Boilers, Tool Heaters And Mobile Hotboxes In Accordance With Manufacturer’s Guidelines, Where Available. The Contractor Will Further Be Responsible For The Calibration Of All Thermostats. The Contractor Must Be Fully Conversant With The Operation Of The Items Listed And Be Suitably Trained And Insured To Carry Out Service And Repair Operations As Appropriate. The Council Will Also Have A Requirement For The Successful Contractor To Provide And Fit Replacement Parts Where Deemed Necessary And For The Supply Of New Appliances Where Required (with The Exception Of Mobile Hotboxes). All Appliances Will Be Inspected, Serviced And Maintained On A Pre-programmed 3 Monthly Basis To Ensure They Are Retained In A Safe Condition At All Times In Accordance With The Following British Compressed Gases Association Codes Of Practice. - The British Compressed Gases Association (bcga) Code Of Practice 7 (cp7): The Safe Use Of Oxy Fuel Gas Equipment (individual Portable Or Mobile Cylinder Supply) Revision 8:2018 - The British Compressed Gases Association (bcga) Code Of Practice 47 (cp47): The Safe Use Of Individual Portable Or Mobile Cylinder Gas Supply Equipment Revision 1:2018 Cpv: 50000000, 50000000.

Description: Scrap Condemn Ferrous Heavy Mixed Melting Consisting Of Bearing,cover, Locking Plate, Special Rig, Distance Piece Bearing, Middle Wheel Lock Plate, Thrower, Lock Plate, Loose Lip, Racer Distance Piece, Spring Seat Liner,a9, Sa9, C2 Relay Valve, C3w Valve, Air Drayer Valve, Ball Bearing,rollar,secondary Spiring For Wap, Tie Bar Assly C&d No.51, Hexagon Bolt With Hex Sl, Isolating 3 Way Cock, Set Of Key &handal For A, Set Of Machine Items For, Arc-chute Assaly For Em, Flexible Hose, Set Of Spring For Connect, Hex Head Screw M8 X 50mm, Lock Retraction Pin & Cha, Break Shoe Complete Nomin, Set Of Hardware For Prima, 3/4 Duplex Check Valve T, Sander Body Dummy Plug, Set Of Threaded Bolt For, Rotex Magnet Valve Type, Top Opereted Handle For C, 3/4" Check Valve, U Bolt, Screw Driver, Nut Driver, Tubing Cutter, Tap Set, Screw Extracter, Plier, Chisel, Marker Magnetic Stand, File, Taper Drill, Taper Shank Drill, Plane Shank Drill, Center Punch, Measuring Steel Tape, Divider, Set Of Outside And Inside Spring, Crimping Tool, Spanner, Grease Gun, Set Of Square Drive, Weld Deposit Set, Hammer, Crowbar, Torque Wrench, Gear To Half Box, Gas Cutting Blow Ripe, Reamer, Tap Set, Open, Ring, Hand Tap Set, Allen Key, Tubler, Blow Lamp, Pipe Wrench, Safty Helmet, Set Of Jaw, File Set, Micrometer, Sliding Bar, Set Of Plier And Cable Cutter, Token Set, Set Of Electronic Iron, Thickness Gauge, Gas Cylender Key, Steel Blade, Cutogen Nozzle, Drill One Set, Brazing Torch, Ratching, Stripper, Cable Tie Cutting Tool, Regulator, Gauge, Tester, Weighing Machine Parts, Dia Grinder, Drill Machine Parts, Hydrolic Pump, Jack, Tecometer, Elect. Fitting, Spring Seat Assembly, Old Panel Set, Equilizer Beam, Casted Bolster Frame Pieces, Axle Box Housing, Pinion, Portal Cut Lasing, Three Pully, Atd Ball Bearing, St,bt Pipe, Mcc Chanel, Da Box, 9 Ton Adjuster, Angle, Nut, Bolt, Tt Sleeve, Double Strap, Ss Wire Rope, Rt Push Arm, Anchor Fitting, Washer, Gaay Tube Pipe, Super Mast Cross, Feader Attachments, Button Plate, Gaay Rod Double Strap, V Bolt, Cls Panel, Facing Panel Upright, Boom, Strain Clamp, Double Eye Distance Rod, Barbid Wire, Snap Head Pin, Clamp, U Bolt, Balance Bet With Huck And Withot Huck, Turfer, Pull Lift, Chair With Arm, Chair Without Arm, Table, Dropout Fuse, Under Move Fitting, Oprating Handle,outer Rigger, Self Controlled, Hydrolic Pusher & Puller, Socket Set, Drawer Work Bench, Pentopen Strip, Main Spring, Tube, Upper Articulation Assly. Study Link, Pento Base Frame, Servo Motor, Hardware And Compresser Crankshaft, Head, Coupling, Disk Valve, Crossarm Channel, Brackets, Clamp, And Gi Wire, Lfd Frame Cover, Lfd Display Frame, Coach Guidance Shed, Battery Frame, Column Speaker, Single Line Display Board, Horn Speaker, Set Of Lybringth, End Frame, Holder Plate, Bello Plate, Speed Probe Housing Cover, Gear, Cut Piece Of Stator Frame Set Of Hardware, Wag-5 Loco Model Parts, Traction Motor Parts, Ball Bearing, Tm Stator Frame, 12 Hole Adjuster, Anticrip Wire, Clavis Snap Head Pin, Eot Crane, Hog Coupler Heater, Table, Propeller Shaft,board,ferrous Boxes, Almirah, Lockers, And Mics Item. Clamping Plate, Drivers Vaccum, Shaft Assly. Blade, End Shield, Horn Guide, Bolt M 48 Etc. Qty.- 135.565 Mts Approx. Sse Lot No. Et/trs/cs/scrap/condemn/ferrous/heavy Mixed Melt/06/13 Dt. 18/12/2024 Note: 1.lot Should Be Sold On As Is Where Is Basis. 2.qty Of Lot Has Been Assessed On Approximate Basis Subject To Any +/- 10% Variation During Delivery By Actual Weighment If Any. 3.if Any Other Material Except Description Is Found While Delivery, Which Is Strictly Restricted & It Can Not Be Delivered. 4.delivery Of Lot By Actual Weighment. 5.it Is Strictly Advised To The Bidder To See The Lot And Loading Point Personally Before Bidding The Lot In E-auction, No Claim Will Be Entertained After Sale Of The Lot.

Details: Description 1 1 Pcs Compression Tools(mechanical) 2 1 Pcs Hydraulic Crimping Pliers 70/6t 3 2 Pcs Digital Clamps Meter Ac/dcalient Wrench Set 4 1 Pcs Alien Wrench Set 5 1 Pcs Adjustable Wrench 12" 6 5 Pcs Solderies Connector #8 7 5 Pcs Solderies Connector #6 8 5 Pcs Solderies Connector #4 9 5 Pcs Solderies Connector #2 10 5 Pcs Solderies Connector 1/0-2/0 11 5 Pcs Solderies Connector 3/0-250mcm 12 5 Pcs Solderies Connector 350mcm 13 5 Pcs Solderies Connector 500mcm 14 10 Pcs Yho100 15 10 Pcs Yho150 16 5 Pcs Yho300 17 5 Pcs Yho400 18 1 Pcs Ladder 8ft 19 1 Pcs Bolt Cutter 14" 20 3 Pcs Line Man Belt 21 1 Pcs Come Along Aluminum Magnesium Alloy Cable Clamp Wire Rope 2/0 22 1 Pcs 8" Hand Pliers Heavy Dutychainsaw 25" 23 1 Chainsaw 25" 24 1 Steel Cabinet (1.8x0.9x 0.4) 25 1 Gould Water Pump 1hp W/ Floating Switch 26 1 Pressure Tank (sp-42,#14) 27 10 Ppr Pipe 1" 28 20 Ppr Elbow 1" 29 10 Teplon Tape 1" 30 5 Union 1" 31 2 Gate Valve 1" 32 5 Ppr Tee 1" 33 1 Check Valve 1" (brass) 34 1 Thhn Wire 3.5mm2 35 1 Ppr Fushion Machine Heavy Duty 20-63mm Pvc Ppr Welding Heater 36 1 Drilling Works Approved Budget For The Contract: Php 672,327.72 Location Of The Contract: Bataraza, Palawan Duration Of The Contract: 7 Days Schedule Of Activities: Posting And Issuance Of Bids: January 15-february 04, 2025 Pre-bid Conference: January 24,2025 Deadline For Submission And Opening Of Bids: February 04, 2025, 10:00 Am Cost Of Bidding Documents: Php 1,000.00 The Local Government Of Bataraza Reserves The Right To Accept Or Reject Any Bid, To Annul The Bidding Process, To Reject All Bids At Any Time Prior To Contract Award Without Thereby Incurring Any Liability To The Affected Bidder/s.

Details: Description Please Quote Your Lowest Price Inclusive Of Vat On The Following Item/s Or Lot/s Listed Below, Subject To The Terms And Conditions Of This Rfq, And Submit Your Quotation Duly Signed By Your Representative Not Later Than January 27, 2025, At Bids And Awards Committee Of Bfar 8, 3rd Floor Mrgp Commercial Bldg, Marasbaras, Tacloban City. For More Information, Please Call The Bac Secretariat At Telephone Nos.: 888-0381 (local 1003) Or Browse The Philgeps Website. Item/ Job Description: Lot 1 1 1000 1ph Watts Water Heater Rod 4 Unit 19,200.00 2 Portable Water Analyzer ( Temperature, Salinity, Ph)battery Type 1 Unit 49,000.00 Lot 2 1 Electric Stand Fan; 16 Inches Plastic Blade; 220 Volts; Heavy Duty And Branded 3 Unit 5,985.00 Lot 3 1 24 Inches Ips Hd Monitor 1 Unit 7,000.00 2 4mp Wifi Ip Ptz Outdoor Camera With 64gb Sdcard 4 Unit 40,000.00 3 650va Ups 3 Unit 15,000.00 4 6u Data Cabinet With Glass Front Door, Brushless Motor Fan 1 Unit 5,198.00 Terms And Conditions: 1. Quality And Quantity Of Goods: The Winning Supplier Is Required To Provide The Goods/materials As Specified In The "purchase Order," Ensuring That They Meet The Required Quality, Condition, And Exact Quantity. 2. Delivery Schedule: The Winning Supplier Must Deliver The Specified Items Within 25 Days Of Receiving And Accepting The Purchase Order, To Bfar-gsu. 3. Return Of Items: The End User Reserves The Right To Return The Items If The Winning Supplier Fails To Meet The Specifications Outlined In The Contract. 4. Payment Terms: Payment Will Be Made Upon Completion Of Delivery/ies, Following Inspection And Acceptance By The Authorized Bfar Representative Or Personnel, And Upon Submission Of All Required Supporting Documents. All Necessary Documents Must Be Processed Before Payment Is Issued. 5. Payment Method: Payments Will Be Processed Through The Land Bank Of The Philippines’ Lddap (land Bank Disbursement Account Payment), An Electronic Payment System For The Government Bidders Must Submit The Following Documents: 1.) Philgeps Registration Number 2.) Mayor's Permit 3.) Request For Quotation (rfq) 4.) Omnibus Sworn Statement (oss)* *for Single Proprietorship – Special Power Of Attorney, In Case The Person Signing This Request For Quotation Is Not The Business Owner, In Its Original And Duly Notarized Form. *for Corporation – Board Resolution/secretary’s Certificate, In Its Original And Duly Notarized Form. *for One Person Corporation (opc) – President’s Certificate/secretary’s Certificate, In Its Original And Duly Notarized Form.

Details: Issuance Of This Solicitation Has Been Delayed Due To Funding Availability. The Solicitation Is Now Expected To Be Issued Sometime In December 2024 With Offers Due In January 2025 (exact Dates Will Be Provided At A Later Time). work Includes, But Is Not Limited To: Provide Labor, Materials, Equipment And Supervision Necessary Toinstall A Digital Water Mixing Valve On The Domestic Hot Water System At The Us Courthouse, Sioux Falls, South Dakota. Focus Of The Project Is To Provide The Capability To Operate The Water Heaters At Higher Temperatures To Prevent The Growth Of Legionella And Temper The Domestic Hot Water Supply To Assure Consistent Safe Hot Water Temperature To Prevent Scalding At The Point Of Use With Connection Of The Digital Water Mixing Valve To The Building’s Bas System For Monitoring. The Work Shall Be Completed Within 20 Calendar Days After The Notice To Proceed. The Project’s Estimated Cost Range Is Between $25,000 And $100,000. information Regarding A Site Visit Will Be Announced In The Solicitation. A Site Visit Is Recommended. This Procurement Is Being Set-aside For Small Businesses Only. To Be Eligible For Award, Contractors Must Be Registered And Active With The System For Award Management (sam) At Sam.gov. All Responsible Sources Submitting An Offer Will Be Considered. timeframes For Definitization Of Equitable Adjustments On Change Orders Notice To Prospective Offerors: The Information Required By Far 36.211 Regarding The Definitization Of Requests For Equitable Adjustments Related To Change Orders Under Construction Contracts Can Be Found At Https://www.gsa.gov/constructioncontractadmin.

Description: Contract notice – General guideline, standard rule Open procedure (construction work) Diesterwegschule, sanitary installation Sanitary installation Diesterwegschule, sanitary installation The construction project involves the renovation and extension of the school consisting of an ... Morediesterwegschule, sanitary installation Sanitary installation Diesterwegschule, sanitary installation The construction project involves the renovation and extension of the school consisting of an existing building as well as the construction of a new school building with two gymnasiums and a cafeteria. Number of floors: 7 full floors The following services are carried out: Sanitary installation: - 145 sanitary objects - 12 instantaneous water heaters - Approx. 1915 m waste water pipes Dn50 to Dn150 - Approx. 2985 m pipes Dn15 to Dn80 - Approx. 120 m gas pipes Dn20 to Dn100 - 1 pressure booster system - 2 rainwater harvesting systems - 2 fire water systems - 1 grease separator for indoor installation with lifting system - 21 floor drains - 2 kitchen channels - 2 compact kitchen drains - 1 condensate lifting system - Approx. 206 various valves Dn15 to Dn80 - 2 cold water distributors - 6 water meters - 7 wall-mounted safes - 4 hygiene flushes - 1 water softening system - Approx. 4639 m Thermal insulation - 575 pieces of pipe bulkheads and fire protection sleeves - 55 pieces of supporting systems with paneling

Description: Restricted invitation to tender with public participation competition Vob/a Air conditioning systems and water/drainage systems The scope of the services consists of the following basic items (these are listed for orientation): - Air conditioning system with approx. 370 m³/h, consisting of ventilation units for intermediate ceiling installation with heat recovery, approx. 90 m ventilation pipes with molded parts (DN 80 to DN 200), air conditioning components (silencers, volume flow limiters), 9 air outlets (disk valves), 2 outside air/exhaust air grilles and insulation for outside and exhaust air - 4 exhaust air single-room fans with accessories and connecting cable, 3 exhaust air wall fans - exhaust gas extraction system for two vehicles, Consisting of a central radial fan with control, connecting cable and silencer as well as a guide profile, hose unit, safety coupling and balancer/spring roller for each vehicle - approx. 16 m of plastic drain pipe (DN 50 to DN 110) with fittings, 7 floor drains, approx. 215 m of stainless steel drinking water pipe (DN 12 to DN 25) with fittings and connectors as well as insulation, approx. 15 sanitary objects with accessories and equipment, approx. 8 electric instantaneous water heaters (3.5 to 21.0 kW) for decentralized drinking water heating and a boot washing system connection - compressed air piping with 4 connections and approx. 35 m of stainless steel pipe

Description: 12274ms24j, 98050175, Quantity- 85.660 Mts Scrap Condemned Unserviceable Ms-gi-ci Rusted,corroded,dusted Mixed Scrap Of C And W,loco,p. Way,signal Interlocking Material Consisting Of All Type Of Sheets,boxes,ms High Gauge,pipes,footsteps,rings,strips,filters,trusses,patch Cut Parts,gutters,drum Clocks,distribution Boards,u Rack,boring Rod,ms Panel Body,ms Battery Charger Covers,hand Cuffs,driver Seat,hand Cart,push Trolley,packing Strips,ms Body Of Block Instrument,ms Boiler Coil Cut Pieces,42 U Rack Ms Body,ms Collapsible Gate,ms Termination Box,ms Bathroom Ventilator,ms Body Of Data Logger,ms Heater Coil,screen Guard,nuts,bolts,lavatory Doors,ms Carriage Doors,pins,rivets,links,rods,angle Cut Pieces,structural Frames,brackets,drums,cocks,basins,wire Meshes,wire Ropes,water Tank Cut Up Parts,casings,corrugated Sheets,filter Top And Bottom Caps,clamps,washer Plates,stands,frames,sheet Cuts,plate Cuts,joists,channels,bases,plates,flats Cut Pieces,vestibule Frames,window,door,shutters,head Stocks Cut Up Parts,broken T And P Items,racks,compensating Rings,bindings,washers,dust Bins,chains,berth Strips,gate Frames,iron Furniture,motor Bodies,screw Rods,levers,flats,rod Cut Pieces,trolley Wheels,gi Ducts,glow Sign Boards,ms Electrical Scrap,building Rods,packing Strips,ms Body Of Rru,air Cooler Empty Bodies,cbf Filter,corrugated Sheets,drums,blower Motor Frames,ucb Packing Frames,under Frame Cut Up Parts,berth Frames,supports,cylinder Blower Covers,valves,end Shield Covers,traction Motor Yokes,shafts,piston Rings,gears,brake Shoe Heads,brake Gear Items,straps,cotters,springs,equalizing Stays,fan Hub,end Shield,pinions,ms Covers,signal Arms,lc Gate Pipes,ladders,angles,signal Booms,rounds,signal Buckets,pulleys,fabricated Posts,signal Lamp Structures,liners,screws,spikes,air Brake Cylinders,brake Hangers,bss Hangers,battery Boxes,battery Containers,junction And Location Boxes,sleepers Cut Pieces,axle Counter Empty Box,dc-dp Ips Empty Rack ,sge Block Instrument Empty Box ,reset Counter Box,gps Clock ,42 V Rack,transformer Bay,ms Chain Pulley Blocks,beam Scale Parts,idly Cooker With Steam Generator Body,wheel Barrow,fry Pan Single Burner,ms Floor Stand,ms Sliders,ms Body Wet Grinder,fry Pan,jara,ms Ips Rack Rifle Safety Chain,ms Air Pump,foot Spray,antenna,spiral Binding Machine,ms Man Drill,trbc Covers,hand Cart Push Trolley,expresser Fan Guard,ms First Aid Box,hacksaw Frame,tool Box,tie Bars,ci Brake Blocks,composite Brake Blocks,ci Pulleys,buckets,ms Gear Wheels,gym Equipment,roti Maker,bicycle Parts,axle Box,bfr Cut Up Parts,grills,mesh,gate Wheels,girders Cut Pieces,collars,trolleys,foot Plates,signal Point Rods And Any Other Ms-gi-ci Material Present In The Lot With Or Without Attachments Of Nf,ss,rubber,nylon And Plastic. Ms Pan Mortars,wire Claws,wire Baskets,crow Bars,jim Crow,dip Lorry,weld Filling Body,sleeper Hooks,rail Dollies,rail Cutting Frames,augers,pick Axe,tongue For Rails,spades,beaters,ballast Rake,powrahs,rail Cum Road Mono Trolley,case Tin,h.s.lamps,rail Dolly Clips,shovels,trolley Wheels And Similar Gang Man Items Of Sorts And Sizes,with Or Without Attachments.fiber,glass,windows,frp Glass Windows,window Frames Of Sorts And Sizes,broken Or Unbroken,with Or Without Attachments Of Nf Window Shutters. [aluminium - 2 Percent] Note- 1. Nf Material,axles,wheel Discs,and Rails Or Material Not Mentioned In The Description,if Found During The Delivery Are To Be Returned To Railways. 2. Track And Track Fittings Running Through This Area Are Excluded. 3. Nf And Stainless-steel Attachments Are Approximately 0.1 Percent Of The Lot Quantity. 4. Gas Cutting Permitted To Facilitate Loading. At Two Locations- Bin No- 273 To 276 And Bin No 244, Left Side Of Road No- 2 Hsn Code- 72044900. Gst- 18 Percent. Note- Delivery On Actual Weighment Basis Only Special Note: Overload Of The Carrying Capacity Of The Vehicle Will Not Be Permitted At The Time Of Taking Delivery, As Per Motor Vehicle Act 1988

Description: Contract notice - general guideline, standard rule open procedure (construction work) Renovation measure - sanitary installation during special construction times, Julius-Leber-Schule, Seilerstr. 32 The construction measure involves the renovation of the main building in 3 construction phases. Number of storeys: 8 full storeys The construction measure will begin around the end of February 2025 and will be completed in around 39 months until the end of May 2028. Renovation measure - sanitary installation during special construction times, Julius-Leber-Schule, Seilerstr. 32 The construction measure involves the renovation of the main building in 3 construction phases. Number of floors: 8 full floors. Construction work will begin approximately at the end of February 2025 and will be completed in approximately 39 months until the end of May 2028. The following services are carried out: Sanitary installation: - 206 sanitary objects - 21 instantaneous water heaters - 9 waste water lifting stations - 1 TW pressure booster system - 1 hygienic flush - approx. 1432 m of piping DN 12 to DN 65 - approx. 1503 m SML drain pipe DN 50 to DN 150 - approx. 49 m PE drain pipe DN 50 - approx. 18 m gas line DN 12 to DN 25 - 110 various valves DN 15 to DN 65 - approx. 1896 m thermal insulation - 448 pipe bulkheads - 90 fire protection kits - 245 dismantling of sanitary objects - 62 dismantling of various valves DN 15 to DN 65 - 6 dismantling of floor drains - approx. 1433 M Dismantling water pipes Dn 15 to Dn 80 - Approx. 1504 M Dismantling sewage pipes Dn 50 to Dn 150