Heater Tenders

Details: Synopsis For Firm-fixed-price Contract – Architect-engineering (a-e) Services (full and Open) To Support The Design Of The Renovation Project Xtlf 21-1035 Add_repair Fire Station, f140 At Vance Afb, Oklahoma. this Announcement Is Not A Request For Proposal. Neither The Government Nor asrc Federal Field Services (affs) Will Pay Or Reimburse Any Costs Associated with Responding To This Request. The Government And Affs Is Under No obligation To Award A Contract As A Result Of This Announcement. 1. Contract Information this Requirement Is Being Procured In Accordance With The Brooks Act As Implemented In Far 36.6. Firms will Be Selected For Negotiation Based On Demonstrated Competence And Qualifications For The Required work. Refer To Section, “5. Selection Process”, For General Information On The A-e Selection Process. a-e Services Are Required For Site Investigation, Engineering Studies, Concept Design, Final Design, And minimal Construction Phase Services For The Subject Project. The Applicable Naics Code Is 5413, architectural, Engineering, And Related Services. This Announcement Is Open To All Businesses regardless Of Size. Affs Is Contemplating Awarding A Firm Fixed Price Contract. The Contract Is Anticipated to Be Awarded In March 2025 And Design Completed In Or Before March 2026. all Firms Will Be Required To Submit Sf330 For This Sources Sought Notice. Only A-e Teams Responding To this Solicitation And Found To Be Qualified Will Be Considered For The Award Of The Design Project. 2. Project Information this Project Is To Renovate The Combination Fire Station, F140. The Facility Is A One-story building And Was Constructed In 1968. The Facility Was Expanded With Building Additions In 1995 And 2004. The Current Size Of The Building Is 18,116 Gross Square Feet. The Size, Configuration, And condition Of This Facility Do Not Align With Requirements Of Dafman 32-1084 And Ufc 4-730-10. renovation Scope To Include Site, Building Envelope, Building Interiors, And Engineering Systems. site Scope Includes Grading And Drainage Design, Utility Relocation, Establishment Of An Aba accessible Route From Parking To The Building’s Main Entrance, Parking Lot Striping, And miscellaneous Sidewalk Repairs. the Project Will Require The Demolition Of A Portion Of The Facility Which Includes Office Areas. A building Addition Consisting Of A New Training Room, Designed To Meet Storm Shelter Criteria, administrative Offices And Public Toilet Rooms Will Be Constructed Where The Existing Office Area Has Been Demolished. building Envelope Scope Includes Replacement Of All Exterior Glazing And Glazing Systems, replacement Of All Roofing, Refinishing Of Exterior Walls, Modifications To Apparatus Bay Door openings, And Replacement Of All Exterior Doors And Frames. the Architectural Interior Scope Of Work Consists Of A Redesign Of Several Interior Spaces To enable The Enlargement Of The Firefighter Toilet/shower Rooms, The Relocation And Proper Sizing Of additional Support Offices And Functions, The Complete Removal And Replacement Of All Finishes Down to The Metal Studs In The Existing Dorm Rooms. In The Dorm Rooms The Demolition May Also Include metal Wall Framing If It Is Determined To Need Replacement. Finishes Such As Paint, Ceiling Tiles, and Flooring Will Be Replaced In Rooms Not Otherwise Modified For Changes In Function. renovation Scope To Achieve Aba Compliance For Spaces That Are Lightly Renovated Includes New signage, Adjustments To Door Hardware, And Relocation Of Controls, Light Switches, And Outlets As required. The Vestibules To The Day Room Are Not Aba Compliant And Will Be Demolished And reconstructed As A Part Of This Project. structural Scope Consists Of The Engineering Design Required To Support The New Building Addition, the Modifications Necessary To Increase The Size Of The Apparatus Bay Openings, Modifications To load Bearing Walls Where New Openings Are Required, And General Modifications Where Required To incorporate The Work Of Other Engineering Disciplines, And/or Because Of An Observed Deficiency, Or code Or Ufc Related Deficiency. renovations To The Existing Fire Protection Systems Includes Adjusting The Existing Fire Sprinkler system As Required To Accommodate Both Floor Plan And Ceiling Changes. Additionally, This Project will Upgrade The Fire Alarm System To Include An Emergency Voice Communication System, A Gas detection System, Provide A New Fire Alarm Interface To Building Life Safety Systems Including Fire sprinkler Monitoring, Provide Low Temperature Sensors In The Apparatus Bays, An Hvac Interface, in-building Mass Notification System, And An Automatic Fire Sprinkler System Throughout The building. The Fire Alarm Control Unit (facu) Will Be Relocated To The New Primary Building entrance. plumbing Scope To Include Engineering Design To Support Replacement Of The Existing Domestic Water hot Water Heater, Replacement Of All Existing Plumbing Fixtures And Installation Of New Connections where Required By Changes To The Floor Plan. Additionally, All Domestic Water Piping To Be Replaced back To The Point Of The Incoming Service. hvac Scope Includes Engineering Design To Support Completely New Systems Throughout The Facility. all Existing Below Grade Ductwork Will Be Abandoned And Sealed. A New Building Automation System will Be Installed For The Facility. electrical Engineering Scope Includes Design Necessary To Replace Multiple Existing Electrical panels, New Automatic Transfer Switches For Separating The Load From The Generator Into Emergency loads And Backup Loads. Lighting Will Be Replaced Throughout The Facility. environmental Scope Of Work Requires Preparation Of Criteria To Address The Abatement Of Acm In vibration Joints In The Mechanical Room And Encapsulated In The Fire Doors. project Will Require Sustainability Design And Compliance With Either The Gbci “guiding Principles assessment For Department Of Defense” Program Or The Gbi “department Of Defense Guiding Principles compliance For New Construction & Comprehensive Replacement” Program. sequencing Plans Will Be Required To Demonstrate How The Renovation Will Take Place Without impacting The Mission Of The Firefighters. 3. Response To Solicitation Submission Requirements: a-e Teams Will Be Selected In Accordance With Far Section 36.602-1. A-e Teams Must Submit A Sf330 package Of Qualifications For Review By Affs And Approved By Vance Afb Government Personnel. 4. Solicitation Submission Requirements the Sf330, Parts A Thru G Should Be Limited To 25 Numbered Pages (8.5”x11”) Of Easily Readable Text (size 11 Font), Graphics And Pictures. Part H May Also Be Included, Is Not Limited In Length, And is Not Required, But Is Encouraged. 5. Selection Process the Intent Of The Affs And A-e Team Arrangement Is To Facilitate The Timely, Transparent, And Efficient Teaming Between The A-e Teamand Affs To Meet The Needs Of Vance Afb. upon Receipt Of The Sf330 Packages, A Committee Comprised Of Affs Staff Architects, Engineers, And leadership Will Review The Package According To Far 36.602-2 Thru 36.602-4. submissions Will Be Evaluated Based On Stated Services In The Sf330. 1. Each Committee Member Will Independently Review The Sf330s And Evaluate The Suitability Of Each A-e Team For This Contract Based On The Submission Requirements Listed Above. 2. The Committee Will Meet, And By Consensus Agree To A Short-list Of The Most Qualified A-e Teams For Progessing To The Next Step For The Selection Process Based On The Provided Information In The Sf330. 3. The Most Qualified Teams Will Be Invited To An Aprpoximately 30 Minute Telephone/virtual Interview For The Purpose Of Answering Clarifying Questions Related To Their Sf 330 Submission. 4. Upon Conclusion Of The Interviews, The Committee Will Rank The Most Qualified Teams. The Rankings Will Be Shared With The 71st Iss/ce Flight Representatives. With Concurrence, Affs Local Purchase Will Provide The Highest Rank Team The Statement Of Work In Order To Begin Negotiating A Fee For The Project. upon Successful Conclusion Of The Fee Negotiations, The A-e Team Will Proceed With The Design process In Accordance With The Statement Of Work And At The Direction Of The Affs Managing architect Or Engineer. please See All Attached Forms: Please Submit All Qualifications To The Following Email Address: shari.lamunyon.ctr@us.af.mil please Note That All Attached Forms Should Be Filled Out And Sent Separately From The #4 Solicitation Submission Requirements .do Not Included These As Part Of The (limited To 25 Numbered Pages). all Qualifications Are Due By The 6th Of February 2025 11:00 Am (cst)

Details: ***this Is A Sources Sought Notice Only*** this Is A Sources Sought Announcement For The Purposes Of Market Research Only In Support Of “b983 Renovate Galley The U.s. Naval Air Facility (naf), Atsugi, Japan”. The Information Received Will Be Utilized Within The Navy To Facilitate The Decision Making Processes And Will Not Be Disclosed Outside Of The Agency. No Reimbursement Will Be Made For Any Costs Associated With Providing Information In Response To This Notice Or Any Follow-up Information Requests. This Notice Does Not Constitute A Request For Proposal, Request For Quote, Or Invitation For Bid And Is Not Construed As A Commitment By The Government For Any Purpose Other Than Market Research. naval Facilities Engineering Systems Command Far East (navfac Fe), Public Works Department (pwd) Atsugi Is Seeking Information On Eligible Business Firms Capable Of Performing Replace Chiller At The Naval Air Facility Atsugi, Japan. general Information per Federal Acquisition Regulation (far) 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. the North American Industry Classification System (naics) Code For This Procurement Is 236220: Commercial And Institutional Building Construction. The Contractor Is Required To Complete The Entire Work, Ready For Beneficial Occupancy Date (bod) Not Later Than 330 Calendar Days From The Date Of Award, And Execute Contract Completion Date (ccd) Within 90 Calendar Days After Bod. To Secure The Government Operation Over Entire On-site Work Period Including Change Of Season, Some Particular Work Including But Not Limited To, Disconnection And Reconnection Of Some Pipings, Must Complete Within A Whole April When An Air-conditioning System Is Expected To Turn Off. The Magnitude Of This Project Is 100,000,000 Jpy – 500,000,000 Jpy. description Of Work the Contractor Shall Provide All Labor, Management, Supervision, Tools, Material, And Equipment Required For Replacement Of Existing Utilities, Floor, Walls, Toilet Rooms, Freezer Room, Unit Coolers, Walk-in Refrigerator And Freezer, Electrical Panel Heaters, Exhaust Fans, Domestic Water System, Dishwasher, And Removal Of Asbestos Containing Material And Material Containing Lead. The Work Also Includes Related Work Which Is Defined As Temporary Work And Relevant Work Required To Accomplish This Project. This Work Does Not Include Unforeseen Site Conditions. contractor License Requirement any Contract Resulting From This Solicitation Will Be Awarded And Performed In Its Entirety In The Country Of Japan. Contractors Must Be Duly Authorized To Operate And Conduct Business In Japan And Must Fully Comply With All Laws, Decrees, Labor Standards, And Regulations Of Japan During The Performance Of The Contract. Contractors Must Be Registered To Do Business And Possess An Appropriate License Issued By The Ministry Of Land, Infrastructure And Transport Or Prefectural Government In Order To Perform Work Under This Contract. status Of Forces Agreement (sofa) the U.s. Government Will Not Offer “united States Official Contractor” Status Under Article Xiv Of The U.s.-japan Status Of Forces Agreement (sofa) To Any Offeror Awarded A Contract Under This Solicitation; Nor Will The U.s. Government Intend To Certify Any Employees Of A Contractor As “members Of The Civilian Component” Under Article I (b) Of The Sofa. submittal Requirements: interested Firms Should Submit Information As To The Capabilities, Capacity And Experience To Perform The Tasks Set Forth Above. The Statement Of Capability (soc) Will Determine The Feasibility And/or Basis For The Navy’s Decision To Proceed With Acquisition. interested Firms Must Submit An Soc, Which Describes, In Detail, The Firm’s Capability Of Providing These Services At Various Military And Other Federal Facilities Worldwide. Your Soc Shall Include The Following: (1) Full Name And Address Of The Firm; (2) Indicate If The Firm Is Registered In The Department Of Defense (dod) System For Award Management (sam) Database, Include Unique Entity Id And Cage Code; And (3) List Up To Three (3) Similar Projects Performed Within The Last Five (5) Years. Provide The Following Information For Each Project As Much As Possible: a) Contract Number And Project Title; b) Name Of Contracting Activity; c) Administrative Contracting Officer’s Name, Current Telephone Number; d) Period Of Performance (start Date And Completion Date); e) Basic Contract Award Amount And Final Contract Value; f) Summary Of Contract Work; interested Sources Do Not Need To Meet Joint-venture Requirements At This Point Since This Sources Sought Notice Is Solely For Market Research Purposes And Not For A Bid. respondents Will Not Be Notified Of The Results Of The Navy’s Market Research. Navfac Fe Will Utilize The Information For Acquisition Planning Purposes. All Data Received In Response To This Source Sought Notice Marked Or Designated, As Corporate Or Proprietary Information Will Be Fully Protected From Release Outside The Government. please Respond To This Sources Sought Announcement Electronically To Ms. Rie Hanazato At Rie.hanazato.ln@us.navy.mil By 29 January 2025 At 17:00 (japan Standard Time) Using The Email Subject Line “sources Sought N4008425b8005 B983 Renovate Galley”. responses Received After The Deadline Or Without The Required Information Will Not Be Considered. Since This Is A Sources Sought Announcement Only, Evaluation Letters Will Not Be Issued To Any Respondent.

Details: Nist-ss25-13 6695 / 334516 title:  Low-noise And Low-drift Closed-loop Cryogenic Microscope System, Including Nanopositioners And Cryogenic High-na Optical Objective background the Mission Of The Quantum Optics Group Of The Quantum Measurement Division Is To Develop And Characterize Measurement Methods That Take Advantage Of The Quantum Nature Of Light To Achieve Better Performance And Uncertainties Or To Enable New Applications That Are Not Possible With Classical Methods And Light Sources. Therefore, One Of The Most Important Aspects Of Quantum Measurement Division’s Research Is To Demonstrate A Prototype Of A High-efficiency Deterministic Single-photon Source In A Telecom Band. This Source Is An Essential Component For Quantum Communications And For Future Scalable Quantum Computer Networks. Operation Of The Source Requires A Low-noise And Low-drift Closed-loop Cryogenic Microscope System, Including Nanopositioners And Cryogenic High-na Optical Objective. nist Will Use The System To Accommodate A High-efficiency Deterministic Single-photon Source In Telecom C-band, For Applications Ranging From Classical And Quantum Telecommunication Networks, In-situ Source Recognition And Classification, And Quantum Effects In Biological Systems. This Device Shall Be Optimized For High-efficiency Coupling Of C-band Telecom Photons Produced By Quantum Dots. This Device Will Be An Integral Component In Nist’s Physical Measurement Laboratory’s Quantum Measurement Division’s Laboratory. It Will Be Used To Study Single-photon And Entangled Light State Generation For Quantum Networks And Quantum Information Science. Light Emitted From The Quantum Dots Will Be Coupled Into The Fiber For Experiments And Characterization. nist Has A Need For A Low-noise And Low-drift Closed-loop Cryogenic Microscope System, Including Nanopositioners And Cryogenic High-na Optical Objective That Meet Or Exceed The Following Draft Minimum Specifications: contract Line-item Number (clin) 0001: The Contractor Shall Provide A Closed-loop Helium Cryostat With Compressor And Vacuum Pump To Include Free-space Experimental Chamber With Xyz Nanopositioning Stages And High Numerical Aperture (na) Objective That Meet The Following Minimum Specifications: operating Ambient Temperature: Between 295 K Or Less And 305 K Or More experimental Chamber: cold Stage Base Temperature ≤ 3.8 K. temperature Range: 3.8k To 320k (cold Plate With No Additional Stages) temperature Stability < 15 Mk Peak-to-peak Fluctuations With Damped Sample Mount cooling Power ≥ 170 Mw At 5 K Or ≥ 130 Mw At 4.2 K cooldown Time To 5 K ≤ 4.5 Hours. cold Plate Vibration Stability <5 Nm Peak-to-peak Fluctuation In X, Y,& Z Axis dc Electrical Access: ≥ 16 Available Dc Feed-throughs For Future Ues (i.e. Not Counting Feed-throughs Already In Use E.g. For Nanopositioning Stage, Temperature Monitoring, Etc.). rf Electrical Access: ≥ 2 X Rf Connections (50 Ohm Coaxial, 18 Ghz). nanopositioning Stage (see Description Below) Installed. the System Includes Two Fiber Optic Feedthroughs Compatible With Smf-28. at Least 5 Optical Access Ports, With Two Windows (one Cold And One Warm) On Each Port. Ports Must Be Reconfigurable To Easily Replace Windows. free-space Optical Access: ≥ 5 Windows (≥ 25 Mm Diameter) With <5 % Loss At Wavelengths From 1450 Nm To 1650 Nm the System Should Be Deployable To An Optical Lab With Optical Tables. internally Housed And Vertically Mounted Microscope Objective Holder. The Holder Must Be Temperature-regulated With A Heater And Thermometer, Allowing The User To Select And Hold The Objective Between 250 K – And 310 K Throughout The Entire Duration Of The Cooldown Cycle. the System To Include At Least Two Interchangeable Sample Holders: One With 16 Dc Wires, And One Flat Sample Holder. the Top Optical Access Window Must Have Threaded Holes (or Set Screw Holes) That Allow For An External Fiber Coupler Mount Via Thorlabs 30 Mm Cage System. objective: ≥0.8 Na Objective. working Distance: < 1.3 Mm. optical Loss <20% Everywhere In The Wavelengths Range From 1150 Nm To 1620 Nm. temperature And Pressure Compatible With The Experimental Chamber. mounted In The Experimental Chamber Using A User-removable Mount. vertical Mount Compatible. nanopositioning Stage: installed In The Experimental Chamber – Thermally Coupled To Cold Plate. system Needs To Include Integrated Cryogenic Closed-loop X, Y, And Z Nanopositioners And Controller. Each Axis Equipped With A Travel Range Of At Least 4.8mm Or More. sensor Resolution Per Direction: <= 200 Nm. ability To Operate The Nanopositioner In An Open Loop Mode With Fine (sub-nm) Positioning Via Adjusting A Dc Voltage. non-magnetic. unidirectional Repeatability: <= 5 Microns (closed Loop). operating Temperature: <= 3 K. operating Pressure: <= 10-8 Torr. closed Loop Control For All Nanopositioners; Pc Control With Applicable Software. vibrations On The Sample Holder (peak-to-peak): xy: 100 Nm Or Smaller z: 50 Nm Or Smaller bandwidth: Up To At Least 100 Hz Or More relative Drift Between A Sample And Objective Focal Point At The Base(fixed) Temperature, Without A Thermal Load: < 50 Nm/hour Or Smaller compressor: type: Air-cooled. helium Connection: Appropriate ≥ 30 Ft Flexible Tubing(hoses) electrical Connection: 208 V @60 Hz 1 Phase Or 110 V @60hz 1 Phase As Appropriate To Provide And Maintain The Above Performance. continuous Operation Cryostat Without The Use Of Extra-instrument Liquid Cryogens fully Automated Pump, Cooldown, Temperature Stabilization, And Warmup. The System Should Include All Necessary Pumps, Controllers, And Compressors. vacuum: the Cryostat System Shall Have The Vacuuming Capability That Results In The Above-required System Features And Performance Capacities. software the Cryostat System Shall Include Automated Operational And Temperature Control Software And Motion Control Software. control Software That Is Capable Of Running Automated Program Scripts From Matlab, Labview, And Python additional Requirements: the Cryostat Temperature Should Be Held For At Least 24 Hours With No Thermal Load system Shall Be Air-cooled target Temperature At The Sample Of 3.8 K Or Lower 110v Or 208v @60hz/1-phase Compressor the System Must Support The Modification To A Different Wavelength Range By The User E.g. To Support Replacement Of Installed Optical Elements With The Elements With Different Antireflection Coating how To Respond To This Notice in Responding To This Notice, Please Do Not Provide Proprietary Information. Please Include Only The Following Information, Readable In Either Microsoft Word 365, Microsoft Excel 365, Or .pdf Format, In The Response. Submit The Response By Email To The Primary Point Of Contact And, If Specified, To The Secondary Point Of Contact Listed At The Bottom Of This Notice As Soon As Possible, And Preferably Before The Closing Date And Time Of This Notice. provide The Complete Name Of Your Company, Address, Name Of Contact For Follow-up Questions, Their Email, Their Phone Number And, If Your Company Has An Active Registration In Https://sam.gov, Your Company’s Unique Entity Id (uei). details About What Your Company Is Capable Of Providing That Meets Or Exceeds Nist’s Minimum Requirements. whether Your Company Is An Authorized Reseller Of The Product Or Service Being Cited And Evidence Of Such Authorization. identify Any Aspects Of The Description Of The Requirements In The Background Section Above That Could Be Viewed As Unduly Restrictive Or Create Unnecessary Barriers That Adversely Affect Your Firm’s Ability To Fully Participate In A Procurement For Such Services And Explain Why. Please Offer Suggestions For How The Requirements Could Be Organized Or Structured To Encourage The Participation Of Small Businesses. for The Naics Code indicate Whether Your Company Is (a) A Small Business Or (b) Other Than Small Business. See The Table Of Small Business Size Standards And The Associated .pdf Download File For Small Business Size Standards And Additional Information. if You Believe The Naics Code Listed In This Notice Is Not The Best Naics Code For The Type Of Product Addressed In This Notice, Identify An Alternative Naics Code That You Believe Would Be More Appropriate For The Planned Procurement. if Your Firm Has Existing Federal Supply Schedule Contract(s) Or Other Contracts For Products Or Services Against Which The Department May Be Able To Place Orders, Identify The Contract Number(s) And Other Relevant Information. describe Your Firm’s Experience (as A Prime, Subcontractor, Or Consultant) Providing The Products Or Services Described In Background Section. provide Any Other Information That You Believe Would Be Valuable For The Government To Know As Part Of Its Market Research For This Requirement. please Let Us Know If You Would Like To Engage To Get A Better Understanding Of The Requirement Or Need Additional Information About The Government’s Requirement For The Products Or Services Described In The Background Section. questions Regarding This Notice questions Regarding This Notice May Be Submitted Via Email To The Primary Point Of Contact And The Secondary Point Of Contact Listed In This Notice. Questions Should Be Submitted So That They Are Received By 5:00 P.m. Eastern Time On January 23, 2025. Questions Will Be Anonymized And Answered Via Sources Sought Notice Amendment Following The Question Submission Deadline. important Notes the Information Received In Response To This Notice Will Be Reviewed And Considered So That The Nist May Appropriately Solicit For Its Requirements In The Near Future. this Notice Should Not Be Construed As A Commitment By The Nist To Issue A Solicitation Or Ultimately Award A Contract. this Notice Is Not A Request For A Quotation. Responses Will Not Be Considered As Proposals Or Quotations. no Award Will Be Made As A Result Of This Notice. nist Is Not Responsible For Any Costs Incurred By The Respondents To This Notice. nist Reserves The Right To Use Information Provided By Respondents For Any Purpose Deemed Necessary And Appropriate. thank You For Taking The Time To Submit A Response To This Request.

Details: Lot 20 Heating/ventilation/sanitary 10 pcs. Floor drains With sludge bucket Approx. 50 m stainless steel drinking water pipe 1 sink system With small instantaneous water heater 1 pc. Heating pump group With distributor bar Approx. 70 m stainless steel system pipe Heating up to Dn 25 5 pcs. Ceiling radiant panels Delivery lengths 2-5 m 1 pc. Flat radiator 6 pcs. Pendulum fan With control

Description: BOQ ITEMS: Supply of 1.5 Sq.mm of Single core multi strand FR-LSH PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible cables, 1100 Volt Conforming to IS 694, Supply of 2.5 Sqmm. Single core multi strand FR-LSH PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible cables, 1100 Volt Conforming to IS 694, Supply of 4.0 Sqmm. Single core multi strand FR-LSH PVC Insulated Industrial Grade Copper Conductor (Unsheathed) Flexible cables, 1100 Volt Conforming to IS 694, Supply of 3CX1.5 Sq.mm FRLS PVC insulated and PVC Sheathed, Multicore, Multi strand Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694, Supply of 3CX2.5 Sq.mm FRLS PVC insulated and PVC Sheathed, Multicore, Multi strand Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694, Supply of 3CX4 Sq.mm FRLS PVC insulated and PVC Sheathed, Multicore, Multi strand Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694, Supply of 4CX1.5 Sq.mm FRLS PVC insulated and PVC Sheathed, Multicore, Multi strand Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694, Supply of 4CX2.5 Sq.mm FRLS PVC insulated and PVC Sheathed, Multicore, Multi strand Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694, Supply of 4CX4 Sq.mm FRLS PVC insulated and PVC Sheathed, Multicore, Multi strand Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694, Supply of 4CX10 Sq.mm FRLS PVC insulated and PVC Sheathed, Multicore, Multi strand Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694, Supply of 4CX16 Sq.mm FRLS PVC insulated and PVC Sheathed, Multicore, Multi strand Annealed Bare Copper Conductor (flexible) industrial cable for Voltage Grade 1100 Volt, Conforming to IS 694, Supply of 6A to 32A rating, 240/415V, 10kA, C Curve miniature circuit breaker suitable for inductive load of Single pole in the existing MCB DB, Supply of 6A to 32A rating, 240/415V, 10kA, C Curve miniature circuit breaker suitable for inductive load of Double pole suitable for existing MCB DB, Supply of 6A to 32A rating, 240/415V, 10kA, C Curve miniature circuit breaker suitable for inductive load of Triple pole suitable for the existing MCB DB, Supply of 6A to 32A rating, 240/415V, 10kA, C Curve miniature circuit breaker suitable for inductive load of Triple pole and Neutral suitable for the existing MCB DB, Supply of 63 Amp rating, 240/415V, 10kA, C Curve miniature circuit breaker suitable for inductive load of Triple pole and Neutral suitable for the existing MCB DB, Supply of 63 Amp rating, 240/415V, 10kA, C Curve miniature circuit breaker suitable for inductive load of Triple pole suitable for the existing MCB DB, Supply of 40A rating, Four Pole, 415V, 50Hz isolator suitable for the existing MCB DB, Supply of 63A rating, Four Pole, 415V, 50Hz isolator suitable for the existing MCB DB, Supply of 25A rating, double Pole, 240V Residual current circuit breaker (RCCB) having a sensitivity current 30mA suitable for the existing MCB DB, Supply of 25A rating, Four Pole, 240V Residual current circuit breaker (RCCB) having a sensitivity current 30mA suitable for the existing MCB DB, Supply of 40A rating, double Pole, 240V Residual current circuit breaker (RCCB) having a sensitivity current 30mA suitable for the existing MCB DB, Supply of 40A rating, Four Pole, 240V Residual current circuit breaker (RCCB) having a sensitivity current 30mA suitable for the existing MCB DB, Supply of 63A rating, double Pole, 240V Residual current circuit breaker (RCCB) having a sensitivity current 30mA suitable for the existing MCB DB, Supply of 63A rating, Four Pole, 240V Residual current circuit breaker (RCCB) having a sensitivity current 30mA suitable for the existing MCB DB, Supply of suitable size GI box with modular plate and cover including providing 1 no.3 pin 5/6A modular socket outlet and 1 no. 5/6A modular switch etc. Complete as required, Supply of suitable size GI Box with modular plate and cover including providing 1 no.6 pin 5/6A & 15/16A modular socket outlet and 1 no. 15/16A modular switch etc. Complete as required, Supply of suitable size GI box with modular plate and cover including providing 1 no.3 pin 5/6A modular socket outlet and 02 no. 5/6A modular switch etc. Complete as required, Supply of suitable size GI Box with modular plate and cover including providing 1 no.6 pin 5/6A & 15/16A modular socket outlet and 02 no. 15/16A modular switch etc. Complete as required, Supply of suitable size GI box with modular plate and cover including providing 2 nos. 3 pin 5/6A modular socket outlet and 2 nos. 5/6A modular switch etc. Complete as required, Supply of suitable size GI box with modular plate and cover including providing 2 nos. 6 pin 15/16A modular socket outlet and 2 nos. 15/16A modular switch etc. Complete as required, Supply of suitable size GI box with modular plate and cover including providing 3 nos. 3 pin 5/6A modular socket outlet and 2 nos. 5/6A modular switch etc. Complete as required, Supply of suitable size GI box with modular plate and cover including providing 3 nos. 3 pin 15/16A modular socket outlet and 2 nos. 15/16A modular switch etc. Complete as required, Supply of heavy duty PVC Casing Capping- casing bearing ISI mark of size 20mmX12mm, Supply of heavy duty PVC Casing Capping- casing bearing ISI mark of size 25mmX16mm, Supply of 5/6 Amp switch modular type switch/socket for the existing modular plate & switch box etc. Complete as required, Supply of 15/16 Amp switch modular type switch/socket for the existing modular plate & switch box etc. Complete as required, Supply of 3 pin 5/6 Amp socket outlet modular type switch/socket for the existing modular plate & switch box etc. Complete as required, Supply of 6 pin 15/16 Amp socket outlet modular type switch/socket for the existing modular plate & switch box etc. Complete as required, Supply of 3 Module Modular type base & cover plate combined (Complete set) suitable for the existing Switch/Socket/Modular Box etc. Complete as required, Supply of 4 Module Modular type base & cover plate combined (Complete set) suitable for the existing Switch/Socket/Modular Box etc. Complete as required, Supply of 1 Module Modular type base & cover plate combined (Complete set) suitable for the existing Switch/Socket/Modular Box etc. Complete as required, Supply of 6 Module Modular type base & cover plate combined (Complete set) suitable for the existing Switch/Socket/Modular Box etc. Complete as required, Supply of 8 Module Modular type base & cover plate combined (Complete set) suitable for the existing Switch/Socket/Modular Box etc. Complete as required, Supply of 3- Pin, 5/6 Amp ISI marked Plug top suitable for operation on single phase 230V, 50Hz power supply, Supply of 3- Pin, 15/16 Amp ISI marked Plug top suitable for operation on single phase 230V, 50Hz power supply, Supply of 240 Volts/50 Hz supply, 800 Watts, Quartz type Room Heater with 02 years Warranty and should bearing ISI Mark, Supply of Electric Flying Insect Trapper/Insect Killer(with 02 years Warranty and should bearing ISI Mark) of Power supply 50 cycle AC, 220-230 Volts, Light Source 3 Nos. U.V. Tube/Halogen Tube Lights of 18 inch X 15 Watt each, Size 20 inch X 14 inch X 5 inch, Covering Area 850 X 900 sq. feet (Approx.), Glue Board UV Resistant Fly Glue board, as and when required, Supply of 2X2 feet 36 Watts LED light fixture recess type with fitting, LED driver and other accessories (complete set as per site requirement) suitable for operation on single phase 230V, 50Hz power supply complete as required as per enclosed technical specification, Supply of 36 Watts LED Linear light with fitting, LED driver and other accessories (complete set as per site requirement) suitable for operation on single phase 230V, 50Hz power supply complete as required as per enclosed technical specification, Supply of 14 Watts recessed COB downlight made up of die-cast aluminium housing and robust heat sink for excellent thermal management of BLACK-GOLDEN COLOUR REFLECTOR with fitting, LED driver and other accessories (complete set suitable as per site requirement), Make- LEGERO or equivalent, Supply of 120 watts Highly efficient top opening LED Street Light with Lens made of pressure die-cast aluminium housing and enclosed with toughened glass with fitting, and other accessories (complete set suitable as per site requirement), Make- HALONIX or equivalent, Supply of 12 Watts recessed type LED downlighter of specifications Ceiling cutout 160 mm, height 23 mm+-1 mm, Slim, Compact, Auminum die cast edge lit panel recess mounted round fixture with opal diffuser including separate electronic driver and other accessories (Complete set as per site requirement), Supply of 4 KVA capacity voltage stabilizers (for 1.5 TR inverted type split AC) with having range of 160 to 280 voltage single phase, 50 Hz AC supply i/c necessary fixing arrangements, clamps, screws, metal clad top, connecting 3 core cable of standered length as per OEM, complete, etc as required, Supply of 4 way, 6 Amp rating, 4 Sockets Extension Board/Spike Guard suitable as per site requirement with 02 years Warranty and should bearing ISI Mark, Supply of 4 way, 10 Amp- 16 Amp rating, 4 Sockets Extension Board/Spike Guard suitable as per site requirement with 02 years Warranty and should bearing ISI mark, Supply of Silica Gel in good Condition for existing Transformer suitable as per site requirement, Supply of 3 blade Pedestal Fan of Blade sweep 400mm-450mm, 240 Volts, 50 Hz supply, with High speed Copper winding motor, rated speed around 2000 revolutions per minute, Low noise level, maximum limit of Power consumption not more than 150 Watts complete as required, Supply of 3 blade Wall mounting Fan of Blade sweep 400mm, 240 Volts, 50 Hz supply, with High speed Copper winding motor, rated speed around 1400 revolutions per minute, Low noise level, maximum limit of Power consumption not more than 60 Watts complete as required, Supply of 3 blade Ceilling Fan of Blade sweep 1200mm, 240 Volts, 50 Hz supply, with High speed Copper winding motor, rated speed around 400 revolutions per minute, Low noise level, maximum limit of Power consumption not more than 60 Watts complete as required, Supply of Red Outer lens for RWY END light suitable for existing Airfield Ground Lighting System (AGL) complete as required .( Existing light fixture is of VARDHMAN make), Supply of Green Outer lens for RWY Threshold light suitable for existing Airfield Ground Lighting System (AGL) complete as required .( Existing light fixture is of VARDHMAN make), Supply of Yellow filter for runway Edge light suitable for existing Airfield Ground Lighting System (AGL) complete as required .( Existing light fixture is of VARDHMAN make), Supply of 5 KV grade plug & receptacle type-I suitable for single core 6 sqmm airfield cable complete as required, Supply of 150W, 6.6/6.6A Halogen Lamp PK30D(64361 HLX-Z), make -OSRAM or equivalent suitable for existing AGL/ CAT-I Fittings complete as required, Supply of 200W, 6.6/6.6A Halogen Lamp PK30D(64382 HLX-C) make - OSRAM or equivalent suitable for existing AGL/ CAT-I Fittings complete as required, Supply of 105 W, 6.6/6.6A Halogen Lamp PK30D(64339 A 105W-10 20X1) make - OSRAM or equivalent suitable for existing AGL Inset Fittings(Make ATG) complete as required, Supply of Isolating transformer of 45 watts, 6.6A/6.6A, 5KV, 50Hz suitable for existing AGL/CAT-I Light fixtures complete as required, Supply of Isolating transformer of 100 watts, 6.6A/6.6A, 5KV, 50 Hz suitable for existing AGL/CAT-I Light fixtures complete as required, Supply of Isolating transformer of 150 watts, 6.6A/6.6A, 5KV, 50 Hz, suitable for existing AGL/CAT-I Light fixtures complete as required, Supply of Isolating transformer of 200 watts, 6.6A/6.6A, 5KV, 50 Hz suitable for existing AGL/CAT-I Light fixtures complete as required, Supply of HRC High Speed Fuse-Semi Conductor Protection Fuse-BS88 Type, 100FE, 100A Rating,Voltage 690Vac,BREAKING CAPACITY 200ka suitable for existing switch gear (Make-Bussmann series EATON or equivalent), Supply of HRC High Speed Fuse-Semi Conductor Protection Fuse-BS88-4 Type, 56ET, 56 A Rating,Voltage 690 Vac,BREAKING CAPACITY 200 ka suitable for existing switch gear (Make-Bussmann series EATON or equivalent), Supply of HRC protectection fuse Model Name/No-3NA7822-ORC,63 A rating,Voltage 500 V ,suitable for existing switch gear (Make-Bussmann series EATON or equivalent), Supply of HRC protectection fuse Model Name/No-3NA7807-ORC,20 A rating,Voltage 500 V ,suitable for existing switch gear (Make-Bussmann series EATON or equivalent), Supply of HRC protectection fuse Model Name/No-3NA7830-ORC,100 A rating,Voltage 500 V ,suitable for existing switch gear (Make-Bussmann series EATON or equivalent), Supply of HRC protectection fuse Model Name/No-3NA7812-ORC,32 A rating,Voltage 500 V ,suitable for existing switch gear (Make-Bussmann series EATON or equivalent), Supply of contactor of model name/number - 3TF477 AC- 1,IE - 90 Amp , voltage rating 400/690 V.(Make - siemens) for existing switch gear, Supply of contactor of model name/number - 3TF46 AC- 1,IE - 80 Amp , voltage rating 400/690 V.(Make - siemens) for existing switch gear, Supply of contactor of model name/number - 3TF3400-0A, AC- 1,IE - 55 Amp , voltage rating 400/690 V.(Make - siemens) for existing switch gear, Supply of CI Base Cover plate of Thickness 5 mm for C.I. Housing boxes/ C.I. Collar of 330 mm outer dia including 6 nos M10 tapped hole, Supply of wind sock(CLOTH) for WDI(WHITE/RED), Supply of 1 x 6 sq.mm airfield copper conductor cable, PVC insulated, PVC sheathed unshielded, anti-termite and anti- rodent treated UG cable of 5 KV grade conforming to IS 1554 (Part II) as amended upto date and as specified in AAI particular specification, Supply of 9W E27 LED Cool Day Light LED Bulb suitable for Existing Landing T indicator(Make Electro System), Supply of PAPI Dichoric Red Filter suitable for existing PAPI System.( Existing PAPI is of Vardhman Make and code of dichoric red filter is PAPI-H001-0010B), Supply of 360 degree Outer Clear Lens for Runway Edge light Fitting suitable for Existing light fixture of VARDHMAN make, Supply of Clear Spreader Lens for Approach light Fitting suitable for Existing light fixture of VARDHMAN make, Supply of Base Plate Gasket suitable forexisting CI Housing Box of 330 mm OD, Supply of Clear Lens for PAPI suitable for existing PAPI System of VARDHMAN make

Details: The Us Army Corps Of Engineers Will Be Hosting Two (2) Industry Days For The Albeni Falls Dam Replacement Spillway Gates Project. One Will Be Held Virtually And One On Site. Below Contains The Information For Both Days. location: Virtual. Zoom Information Provided Below. date: 29 January 2025 time: 10:00 Am To 12:00 Pm Pst location: Onsite. Location Information Provided In Attachment 1. The Onsite Visit Is Restricted To Two Personnel Per Company. Follow Pre-registration Steps Provided Below. date: 30 January 2025 time: 10:00 Am To 2:00 Pm Pst project Description: the Seattle District, U.s. Army Corps Of Engineers Has A Requirement To Replace Existing Steel Spillway Gates At Albeni Falls Dam (afd), Oldtown Idaho. Afd Is A Concrete Gravity Structure Consisting Of Two Main Sections, The Spillway And Powerhouse. The Spillway With A Total Of 10 Spill-bays, Which Are Controlled By 32 Feet High By 41 Feet Wide Vertical Steel Lift Gates. These Gates Consist Of An Upper And Lower Leaf. One Additional Gate Is Available With Each Leaf Being Stored At The Top Of A Maintenance Slot To Be Used During Emergencies Or When Maintenance Is Required On Another Gate. The Gates Underwent Inspection In 2012 Which Identified Repairs And Maintenance That Were Needed To Ensure That The Gates Are In Good Operating Condition. A Contract Was Awarded In 2022 For The Repair And Maintenance Of The Gates. However, The Rehabilitation Efforts Will Be Stopped After The Return Of The First Rehabilitated Gate Has Been Returned To The Dam. The Project Is Seeking To Fabricate Replacement Gates. Replacement Spillway Gates Components Include: fabricate Minimum Three (3) And Maximum Eleven (11) New Vertical Lift Steel Spillway Gates Offsite including Paint, Non-destructive Testing (ndt), Seals And Seal Heaters, Cathodic Protection, Wheels, Dogging And Latching Mechanisms. fabricate Two (2) New Lifting Beams For New Spillway Gates. including Paint, Ndt, And Three (3) Electric Gear Motor Driven Actuators For Latching And Dogging Mechanisms On Lifting Beam And Gates. mobilize/demobilize A Crane To Transition Each Leaf Of The Gate(s) To A Designated Location In The Vertical Position For The Operating Project To Transfer And Install The Gate Into The Designated Slot With The Project Intake Gantry Cranes. Provide Fixture To Hold Gate Leaf In Vertical Position. retrieve The Existing Gates From The Designated Location For Removal And Disposal Of The Existing Spillway Gates. verify The New Spillway Gate, Lifting Beam Equipment, And Electrical Features Are Properly Fitted And Tested. delivery Of New Fabricated Gates Need To Be Staged And Scheduled So That Usace Dam Operations Are Not Impacted. the Contract Solicitation And Award Is Planned In Fy26 For The First 3 Gates. The Remaining 8 Gates Will Be Optional Award Items To The Contract With Anticipated Award In The Subsequent Years. the Anticipated Naics Code May Be 332312, Fabricated Metal Product Manufacturing (supply). Or Naics Code Is 237990, Other Heavy And Civil Engineering, Construction. the Proposed Project Is Anticipated To Be A Competitive, Firm-fixed-price Contract To Be Procured In Accordance With The Federal Acquisition Regulation (far) Part 15 (contracting By Negotiation), Using The Tradeoff Process To Acquire Gates In The Most Expeditious Manner Possible. the Virtual Industry Day Event Will Take Place On 29 January 2025 At 10:00 Am Pdt Via Zoom. Below Is The Link To Register In Advance For This Webinar. https://boisestate.zoom.us/webinar/register/wn_bl_wtmhztsezxzhazwle8q after Registering, You Will Receive A Confirmation Email Containing Information About Joining The Webinar. you Must Pre-register To Attend This Onsite Industry Day By Submitting The Attached Rsvp Form In An Email To Jeannette Patton, Contract Specialist, At Jeannette.k.patton@usace.army.mil And Daisy Douglass, Project Manager, At Daisy.p.douglass@usace.army.mil, And Reference The Albeni Falls Dam Spillway Gate Replacement Project Onsite Industry Day In The Subject Line. Rsvp By 22 January 2025 At 4:00 Pm Pst. Required Personal Protective Equipment For The Onsite Visit Includes Safety Vest And Boots/safety Shoes. If Attendee Is A Foreign National, This Information Must Be Provided By 17 January 2025 At 4:00 Pm Pdt. Late Respondents, Those Not Pre-registered, Or Those Not Providing The Correct Information Will Not Be Granted Access To The Site. Participation Is Limited To Two Representatives From Each Interested Entity. The Slide Deck And Attendance Participation Will Be Available After Both Industry Days Via Sam.gov. attending The Site Visit Day Is Highly Recommended Since It Is Unlikely That An Additional Site Visit Will Be Offered Until The Solicitation Period. in-processing Begins For All Vendors At The Main Entrance. When You Approach Gate 1 (marker 2), You Will Be Required To State That You Are Attending The “afd Spillway Gate Replacement Industry Day”. At Marker 2, You Will Use The Pedestal Call Box To Contact The Administrative Assistant At The Extension Listed On The Plaque. Your Name Will Be Checked Against The Pre-registered Attendees’ List And You Will Then Be Directed To Drive To The Main Parking Lot, Between Markers 2 And 3, Where You Will Park Your Vehicle For The Entirety Of The Site Visit. At Gate 2 (marker 3), You Will Be Required To Present Photo Identification And Afd Staff Will Direct You To The Conference Room For The Safety Briefing And Project Overview Prior To Proceeding Out To The Project Site. Your Safety Gear Will Be Inspected Before Entry Into Any Additional Areas. the Following Documents Are Attached In Support Of This Special Notice. attachment 1-location Information For Onsite Industry Day attachment 2- Questions From Usace To Industry Regarding The Afd Spillway Gate Replacement attachment 3- Rsvp Form if You Would Like To Provide Feedback For Consideration On The Documents, Please Provide Them By Email To: Jeannette Patton, Contract Specialist, At Jeannette.k.patton@usace.army.mil By 6 February 2025, 12:00 Pm Pst. small Business Program Inquiries: enshane Hill-nomoto: Enshane.nomoto@usace.army.mil https://www.nws.usace.army.mil/business-with-us/small-business/ thank You For Your Interest In This Usace Project. 1/7/2025: Amendment 1 - Remove Set Aside Requirement. 1/10/25: Amendment 2 - Add A N To Contract Specialist Name In The Description Section. The Correct Spelling Is Jeannette Patton Email @ Jeannette.k.patton@usace.army.mil

Details: Pre-solicitation For Asbestos Containing Material, Acm, Removal Activities In Building 3- Veterans Canteen Service the Department Of Veterans Affairs, Network Contracting Office (nco 6) At The Fayetteville, Nc Anticipates Issuing A Solicitation For A Construction Project To Perform Acm Removal And Disposal Activities In Building 3 At The Fayetteville Va Medical Center Located At 2300 Ramsey Street, Fayetteville Nc 28301. the Fayetteville Vamc Campus Will Need A Cm Removal And Disposal In The Veterans Canteen Service Storage Room 105, Canteen Office Area Room 114 & 114b, And The Retail Store Area Room 112. Acms To Be Removed Are Category 1 Non-friable Materials. The Va Medical Center Considers Removing The Asbestos-containing Materials As A Regulated, Class Ii Asbestos Removal That Shall Be Cleared By Visual Inspection, And The Collection Of Multiple Air Samples Will Be Analyzed By Tem Analysis. A Third-party Air Monitoring Firm, Retained By The Va, Shall Conduct Continuous Project Monitoring During Removal Activities And Perform The Final Visual Inspection And Clearance Sampling. The Vendor Shall Be Responsible For Acquiring Appropriate Permits. This Project Shall Be Completed In Three Separate Phases. Phase 1 Will Be The Removal Of Acm In Rooms 105 And Room 114. Phase Ii Will Be The Removal Of Acm In The Retail Store Area Room 112 During The Proposed Remodel. Phase Iii Will Be Replacing The Flooring Throughout With A Luxury Vinyl Tile (lvt). Coordinate The Color And Pattern Of Flooring With The Va Cor. general Scope: 1. Isolate And Regulate Work Areas With Negative Pressure Enclosures (npes). Npes Must Be Constructed Of 6-mil Fire-retardant Polyethylene Sheeting, Appropriate Framing, And Maintain -0.02 Inches Of Water Column Monitored Via A Magnehelic Gauge Or Continuous Chart Recorder. 2. Npes Shall Be Equipped With A Fully Functional Three-stage Decontamination Unit And A Separate Loadout. 3. Hepa-filtered Air, From Within The Npes, Shall Be Exhausted Outside The Building If Possible. 4. Once The Npe Has Been Cleared And Demobilized, The Vendor Shall Be Responsible For Repairing Finished Surfaces That Are Damaged By Contact With Spray Glue Or Adhesive Tape. The Vendor Shall Ensure Finished Surfaces That Have Been In Contact With Spray Glue Or Adhesive Tape Are Satisfactorily Cleaned. 5. In The Veterans Canteen Service Areas Acm Removal Is As Outlined Below And In The Attached Asbestos Survey Report: a. Asbestos- Retail Store Area - Multiple Layers Of Flooring/mastic-brown Top Layer (rm 112 1894 Sq.ft.) b. Asbestos Retail Store Area - Brown Vinyl Plank (rm 112) c. Asbestos Canteen Office Area - 12x12 Floor Tiles/ Mastic Under Carpet (rm 114 333 Sq. Ft.) d. Asbestos Canteen Storage Room - 12x12 Floor Tile/black Mastic (rm 105 399 Sq. Ft.). although The Va Medical Center Does Not Dictate The Method Of Removal, The Va Medical Center Requests The Vendor Use The Removal Method That Is The Most Suitable To The Existing Work Site Conditions. All Work Shall Be Done To Ensure That The Asbestos Abatement Is Done In Accordance With All Applicable Regulations, Standards, And Va Medical Center Policies. If Additional Unforeseen Conditions Are Found, Notify The Va Immediately And Submit An Estimate And Anticipated Schedule. The Abatement Activities Are To Be Completed Safely In The Shortest Time Possible. The Va Requests The Removal Activities For Each Phase Are To Be Completed During A Single Weekend (three Consecutive Days Or Less). Interior Mobilization Shall Begin No Earlier Than 4:00 Pm Friday And Conclude No Later Than 5:00 Monday. The Preference Is To Complete The Work Over A Three-day Or 4-day Holiday Weekend (ex. Veterans Day Weekend, November 08 November 11, 2024), Or Martin Luther King Jr. Day Weekend January 17 January 20, 2025) But Ultimately The Date Will Need To Be Accepted By All Stakeholders Involved. outages/shutdowns: If For Any Reason The General Contractor Or Its Sub-contractors Require An Outage/shutdown, The General Contractor Must Pre-coordinate All Outage Activities With The Va Cor And Alternate Cor Prior To Undertaking Any Such Activity. The Va Will Provide A Copy Of An Outage Request That Is The Responsibility Of The General Contractor Superintendent To Complete, Execute, And Return To The Va Cor. The Normal Timeline To Obtain Va Approval Of A Request Is Two Weeks. Therefore, Please Plan Accordingly. An Outage Would Include But Is Not Limited To The Following: Fire Pumps, Fire Suppression, Fire Alarms, Ats, Med Gas Pumps, Chillers, Hot Water Heaters, Potable Water, Chilled Water, Natural Gas, Boilers, Da Tanks, Steam Traps, Controls, Elevators, Space (hallways, Exam, Procedural, Office, Or Patient Rooms), Generators, Ups, Emergency And Normal Power (partial Or Full). a Final Visual Inspection Will Be Conducted Immediately After The Conclusion Of Removal Activities. Clearance Tem Air Sample Collection Will Be Conducted Within 24 Hours Of Achieving Final Visual Clearance. the Estimated Construction Magnitude Is Between $100,000 And $250,000. naics Code: 562910 Size Standard: $25 Million this Solicitation Is Anticipated To Be A Total Service-disabled Veteran-owned Small Business Set Aside. Solicitation Material Will Be Available On/about January 07, 2025. Any Specifications, Drawings, And Amendments Will Be Posted On This Website. Proposals Will Be Due Approximately 30 Days After Issuance Of The Solicitation. Location And Points Of Contact For Site Visits Will Be Identified In The Solicitation. this Notice Is For Informational Purposes Only And Is Not A Request For Proposals. The Government Is Not Obligated To Issue A Solicitation As A Result Of This Notice. No Other Information Is Available Until The Issuance Of The Solicitation. No Bidder S List Is Maintained. All Interested Vendors Should Register On This Website. It Is The Offeror's Responsibility To Check The Website Periodically For Any Amendments/notices To The Solicitation. Prospective Contractors Must Be Registered In The System For Award Management (sam) Database In Order To Obtain Access To Sam.gov And Vetcert Registration Must Be Current And Active To Be Eligible For Contract Award. Contractors, Please Note: Online Representations And Certifications Applications (orca) Apply To This Solicitation. With Orca, You Now Have The Availability To Enter And Maintain Your Reps And Certs With Your Proposal. any Questions Regarding This Announcement And All Future Announcements Regarding This Project Must Be Emailed To Angelo.harris@va.gov. No Telephone Request For Bidding Material Will Be Accepted At This Time.

Details: ***amendment To Synopsis To Add Nsn – 21 Jan 2025*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 4920 006053964 Clamp Assy, Protract 6150 011356058 Cable Assembly Set 4920 011084068 Test Set, Electronic this Nsn Is Included In The Revised Attachment “src Nsn For Rfp Revised 21 Jan 2025." This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update – 21 Jan 2025*** ***amendment To Synopsis To Add Nsn – 13 Jan 2025*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 4910 013057271 Bead Breaker, Pneumatic this Nsn Is Included In The Revised Attachment “src Nsn For Rfp Revised 13 Jan 2025." This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update – 13 Jan 2025*** ***amendment To Synopsis To Add Nsn – 26 Jul 2024*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 4120 017193318 Environmental Control Unit this Nsn Is Included In The Revised Attachment “src Nsn For Rfp_revised 26 Jul 2024." This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 26 Jul 2024*** ***amendment To Synopsis To Add Nsn – 24 Jun 2024*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 4920 011464908 Test Set, Pneumatic this Nsn Is Included In The Revised Attachment “src Nsn For Rfp_revised 24 Jun 2024." This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 24 Jun 2024*** ***amendment To Synopsis To Add Nsn – 26 Jan 2024*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 4520 015212076 Heater,duct Type,po this Nsn Is Included In The Revised Attachment “src Nsn For Rfp_revised 26 Jan 2024." This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 26 Jan 2024*** ***amendment To Synopsis To Add Nsns – 1 Dec 2023*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 6230 015512664 Floodlight Set, Electr Magnum 4520 017104507 Explosion Proof Heater these Nsns Are Included In The Revised Attachment “src Nsn For Rfp_revised 1 Dec 2023”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 1 Dec 2023*** ***amendment To Synopsis To Add Nsn – 16 Nov 2023*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 4920 005369026 Fixture, Aircraft Main this Nsn Is Included In The Revised Attachment “src Nsns For Rfp_revised 16 Nov 2023”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 16 Nov 2023*** ***amendment To Synopsis To Add Nsns – 7 Nov 2023*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 4930 016963318 4fwct-1 4930 016959001 4fwct-2 4930 016959002 4fwct-3 4930 016959003 4fwct-4 4930 016959828 4fwct-5 4930 016959829 4fwff -1 4930 016959830 4fwff -2 4930 016963320 4fwfp-1 4930 016963319 4fwfp-2 4930 016963322 4fwflh-1 4930 016963323 4fwlh-2 4930 016963317 4fwrb-1 4930 016963315 4fwfrb-2 4930 016963316 4fwrb-3 these Nsns Are Included In The Revised Attachment “src Nsns For Rfp_revised 7 Nov 2023”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 7 Nov 2023*** ***amendment To Synopsis To Add Nsn – 4 Oct 2023*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 4210 016106985 Nrp, Extinguisher, Wheeled this Nsn Is Included In The Revised Attachment “src Nsns For Rfp_revised 4 Oct 2023”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 4 Oct 2023*** ***4 May 2023 Update To Add Another Nsn To The 1 May 2023 Amendment - See Below*** ***amendment To Synopsis To Add Nsn – 1 And 4 May 2023*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fscniinnomenclature 4940 015915126 Platform Lift 3655 015254611 Tank, Storage, Liquid these Nsns Are Included In The Revised Attachment “src Nsns For Rfp_revised 4 May 2023”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 1 May 2023*** ***end Of 4 May 2023 Update*** 15 Dec 2022 Update: the Nsn For The Kitchen Module Added On 16 Nov 2022 Is Not 7360 046437074 And Is Rather 7360 016437074. Attachment "src Nsn For Rfp_revised 16 Nov 2022" And The 16 Nov 2022 Amendment Below Have Been Edited And Now Reflect This Change. ***amendment To Synopsis To Add Nsns – 16 Nov 2022*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 7360 016437074 Kitchen Module 1740 011274954 Trailer, Ground Handling these Nsns Are Included In The Revised Attachment “src Nsns For Rfp_revised 16 Nov 2022”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***the Nsns Added Via Amendment To Synopsis On 31 Oct 2022 Will Not Be Added To Src And Have Been Removed From The Attached Spreadsheet.*** ***end Of Update - 16 Nov 2022*** ***amendment To Synopsis To Add Nsns – 31 Oct 2022*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 1730 016260679 Adapter, Ground Handling 4920 123588762 Test Set, Aircraft Electrical these Nsns Are Included In The Revised Attachment “src Nsns For Rfp_revised 31 Oct 2022”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 31 Oct 2022*** ***amendment To Synopsis To Add Nsn – 16 Jun 2022*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 1740 004038235 Trailer, Ground Handling this Nsn Is Included In The Revised Attachment “src Nsns For Rfp_revised 16 Jun 2022”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 16 Jun 2022*** ***amendment To Synopsis To Add Nsn – 9 Jun 2022*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 4920 016148506 Cart, Corrosion Control this Nsn Is Included In The Revised Attachment “src Nsns For Rfp_revised 9 Jun 2022”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 9 Jun 2022*** ***amendment To Synopsis To Add Nsn – 14 Apr 2022*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 3950 015348852 Crane, Floor, Portable this Nsn Is Included In The Revised Attachment “src Nsns For Rfp_revised 14 Apr 2022”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 14 Apr 2022*** ***amendment To Synopsis To Add Nsns – 31 Jan 2022*** this Is An Amendment To The Original Synopsis Posted For Fa8532-20-r-0004 (later Changed To Fa8532-21-r-0004 To Align With The Fiscal Year) For Strategic Replenishment For The Support Equipment & Vehicles Division That Was Awarded Under Multiple Award Idiq Contracts Fa8532-21-d-0004, Fa8532-21-d-0005, Fa8532-21-d-0006, Fa8532-21-d-0008, Fa8532-21-d-0009, Fa8532-21-d-0010, Fa8532-21-d-0011, And Fa8532-21-d-0012. This Amendment Serves To Include The Following As Common Support Equipment, Procurable Under The Aforementioned Multiple Award Idiq: fsc Niin Nomenclature 1730 008542236 Jack, Aircraft Landing 3655 016213426 Generating And Char 3655 015614006 Purging Unit, Air, Li these Nsns Are Included In The Revised Attachment “src Nsns For Rfp_revised 31 Jan 2022”. This Amended Synopsis Will Not Result In A New Solicitation, But Rather Is Determined To Be Within The Scope Of The Multiple Award Idiq To Source, Acquire, In Certain Instances Qualify, And Deliver Items/services Considered To Be Common Support Equipment. Again, This Amendment Will Not Result In A New Solicitation. ***end Of Update - 31 Jan 2022*** solicitation Amd 001 Is Posted Along With Revised Rfp Attachment 1 this Notice Is Linked To Fa8532-21-r-0004. notice: The Official Government Rfp Was Uploaded To This Notice On 15 Jan 2021. The Solicitation Number Is Fa8532-21-r-0004. The Official Solicitation Was Posted On 15 Jan 2021. The Rfp Number For This Acquisition Has Been Updateddue To The Fy Of Official Government Solicitation. this Synopsis Is A Notice Of Intent That Support Equipment And Vehicles Division At Robins Afb, Georgia (aflcmc/wnkaa) Anticipates Issuing A Request For Proposal (rfp) For A Firm Fixed Price, Indefinite Delivery Indefinite Quantity (idiq) Multiple Award Contract For The Strategic Replenishment Contract (src) Acquisition For The Sourcing, Acquisition, And Delivery A Broad Range Of Ground And Aircraft Common Support Equipment (cse) End Items. Three (3) Separate Groups Of Awardees Are Anticipated; Allowing An Offeror To Propose To Either Group A, Or Group B, Or Group C Or Any Combination Of Groups A, B, And C. The Duration Of The Contract Will Be 10 Years Total To Include A Basic Contract Period Of One (1) Year And Ten (10) Additional 12 Month Ordering Periods. The Period Of Performance Will Be For A Total Of Ten (10) Years And Include A Basic Contract Period Of 12 Months And Nine (9) Ordering Periods Of 12 Months Each. this Acquisition Will Be Set Aside For Small Business. the Successful Offerors (contractors) Shall Source, Acquire, And Delivery A Broad Range Of Ground And Aircraft Common Support Equipment (cse) End Items. The Src Requirement Includes Approximately 500 National Stock Numbers (nsns) From A Subset Of Approximately 60 Federal Stock Classes (fscs) In Support Of The Air Force (af), Foreign Military Sales (fms), Air National Guard (ang), Af Reserve, As Well As Other Services. A Descriptive Range Of The Assets Involved Consists Of But Is Not Limited To Aerial Stores Lift Trucks, Aircraft Engine Trailers, Air Conditioners And Heaters, Base And Aircraft Arresting Systems, Basic Expeditionary Airfield Resources, Cranes, Dollies, Lift-adapters, And Various Electronic And Mechanical Aircraft Maintenance Testers. Nsns Included (see Attachment 1) Are Replenishments For Existing Capabilities And Do Not Constitute New Start Programs. The Contractor Shall Perform These Functions From The Currently Approved/qualified Sources Of Supply As Provided By The Government. Nsns With One Or Multiple Approved Sources Of Supply As Well As Those Not Procured In The Recent Years Are Included In The Srcs. The Contract Also Requires The Src Contractors To Provide Incidental Services That Include, But Are Not Limited To, The Following: Managing Vendors To Ensure They Meet Performance And Quality Requirements, To Include Providing Warranties; Managing Vendors To Ensure On Time Delivery; Establish And Utilize A Means To Facilitate The Electronic Exchange Of Contract, Order, Shipping, Cataloging, And Vendor Information For All Included Items; Provide Technical Orders In Certain Instances, Upon Government Request. a Statement Of Work (sow) Will Be Provided As Part Of The Rfp Package Along With Various Mandatory Data Deliverables Such As Test Plans And Test Reports. Foreign Companies Will Not Be Permitted To Participate In The Competition. Orders May Require Access To Technical Data That Is Export Controlled Data. In Order To Access Export Controlled Data, Vendors Must Be Registered In Beta.sam.gov, Ccr, Jcp And Be Approved For Export Control Document Access. far Parts 12 And 15 Procedures Will Be Utilized. Offerors Shall Prepare Their Proposals In Accordance With Mandatory, Explicit, And Detailed Instruction Contained In The Rfp. This Acquisition Will Utilize Technically Acceptable Source Selection Procedures In Accordance With Far 15.101-2 And 15.3 As Supplemented By The Dod Source Selection Procedures Referenced In Dfars 215.300 And The Affars Mandatory Procedures 5315.3 To Make An Integrated Assessment For A Best Value Award Decision. The Government Intends To Award Multiple Contracts As A Result Of This Solicitation. The Government Will Not Be Liable For Costs Incurred By Offeror(s). it Is Anticipated That A Draft Solicitation Will Be Issued At The End Of August 2020. It Is Anticipated That The Rfp Will Be Released On Or Around 23 September 2020 And Anticipated Award In The May –june 2021 Timeframe. Solicitation Number: Fa8532-20-r-0004. Information In This Announcement Relative To Line Items Is Tentative And Is Subject To Change In The Final Solicitation Document That Is Published On Beta.sam.gov. interested Offerors May Notify The Pocs Listed Below For Any Additional Questions. No Telephone questions. Offerors Are Encouraged To Register To Receive Notification For Solicitation And All Amendments/revisions And To Check Beta.sam.gov Site Prior To Submission Of Their Proposal. update: Draft Rfp Added 31 Aug 2020 items With Complete Or Partial Technical Data Packages Will Be Identified At The Individual Order Level. Cost/price Evaluation Will Occur On Each Individual Order. 3 Sep 2020 Update: Q&as Uploaded As An Attachment. 18 Sep 2020 - Q&as Uploaded Viafile Title 18 Sep 2020 Src Questions And Answers Posted To Beta.sam.pdf 25 Sep 2020 - Q&as Uploaded Via File Titled Questions And Answers 25 Sep 2020 5 Nov 2020 Updates - An Newlisting Of Contractor's Questions And The Government's Responses Has Been Uploaded As An Attachment Titled "questions And Answers 5 Nov 2020." The Current Estimated Rfp Release Date Is 30 Nov 2020. Therfp Response Datewill Be 30 Days After The Formal Rfp Is Released. the Rfp Number For This Acquisition Has Been Updateddue To The Fy. The New Rfp Number Is Fa8532-21-r-0004. ppi Cannot Be Uploaded At This Time Due To Unsupported File Format. Please Contact Pocs On This Announcement And Ppi Will Be Provided Via Dod Safe. 3 Dec 2020 - Rfp Release Date Has Been Delayed. The Government Is Anticipating An Rfp Release Date This Calendar Year. 11 Jan2021-it Is Anticipated That The Rfp Will Be Released Nlt 19january2021. 15 Jan 2021 - The Rfp (fa853221r0004) And All Accompanying Attachments Have Been Uploaded. ppi Tool Is Available Upon Email Request And Will Be Supplied Through Dod Safe. 20 Jan 2021 - Rfp Attachment 3 Has Been Added. 21 Jan 2021 - Q&a 21 Jan 2021 And An Update To Attachment 1 Seen In The Q&a Have Been Uploaded. 26 Jan 2021 - Another Q&a Has Been Uploaded As An Attachment.attachments 10, 11, 12, And 13 Have Been Uploaded.notice: The Official Government Rfp Was Uploaded To This Notice On 15 Jan 2021. The Solicitation Number Is Fa8532-21-r-0004. The Official Solicitation Was Posted On 15 Jan 2021. The Rfp Number For this Acquisition Has Been Updateddue To The Fy Of Official Government Solicitation. 26 Jan 2021 - Solicitation Amd 001 Is Posted Along With Revised Rfp Attachment 1 27 Jan 2021 - Q&a 1/27/21 Has Been Uploaded. notice: Attachment 10 Has Been Removed. It Was A Previous Version With An August Date. The Final Src Sow (05 Jan 2021) Is Attachment 10 And Is The Accurate And Current Version. questions And Answers 1 Feb 2021 Has Been Added To Attachments. question And Answer 2 Feb 2021 Has Been Added To Attachments. question And Answer 8 Feb 2021 Has Been Added To Attachments. questions And Answers 9 Feb 2021 Has Been Added To Attachments. as A Reminder To Offerors: iaw Attachment 1, Section L. “email To Transmit Such Information Must Be Sent Encrypted, And Must Include “source Selection Information – See Far 2.101 And 3.104” In The Subject Line Of The Email. In Order To Facilitate The Sending And Receiving Of Encrypted Emails, Offerors Must Use Ms Outlook Email Configured To Support Encryption Or A Different Email Product That Is S/mime Compatible And Configured To Support Encryption. If You Intend To Submit Your Source Selection Information Via Encrypted Email, You Will Need To Contact The Buyer/contracting Officer (co) Indicated On The Face Page Of The Solicitation Prior To That First Submittal In Order To Exchange Certificates Used For Encryption. To Ensure The Process Is Working Correctly, Send A Test Encrypted Message First (without Including Any Source Selection Information). Otherwise, Source Selection Information Will Be Transmitted Via Direct Mailing Or Dod Safe At Https://safe.apps.mil/.” question And Answer 16 Feb 2021 Has Been Added To Attachments.

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with PPS pipes, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler pipes for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.

Description: Public tender Vob/a Demolition and dismantling work (din 18 459); Floor covering work (din 18 365); Screed work (din 18 353); Tiling and panel work (din 18 352); Scaffolding work (din 18 451); Painting and varnishing work - coatings (din 18 363); Bricklaying (din 18 330); Plastering and stucco work (din 18 350); Wallpapering (din 18 366); Drywall work (din 18 340); Carpentry and timber construction work (DIN 18 334); Demolition and dismantling work (DIN 18 459); Construction site equipment: Construction site equipment including mobile crane 1 piece; Construction fence, wire mesh with privacy net 250 m; Construction road + container parking areas, mineral mixture 200 m²; Lawn finishing care 350 m²; Work protection: 1-chamber lock 12 pieces; Partitioning, fiber-tight and stable 250 m²; Material airlock and personnel airlock; Scaffolding work: Facade/roof scaffolding, 2 kN/m², W06 2300 m²; Provision for scaffolding 78200 m²wo; Dismantling of contaminated building materials: Demolition of asbestos cement ventilation ducts 12 pieces; Demolition of asbestos-containing flexible panels + adhesive 215 m²; Demolition of KMF impact sound insulation, D=15mm 1250 m²; Demolition of PK-containing release paper 1100 m²; Demolition work: Demolition of tiles 750 m²; Demolition of PVC floor covering 900 m²; Demolition of cement screed 360 m²; Demolition of interior wall plaster 4200 m²; Demolition of ceiling plaster + reed mats 1590 m²; Demolition of interior doors + frames 95 pcs.; Shell work: Making / widening door openings 31 pcs.; Making masonry pillars 19 pcs.; Making foundations for external staircase 1 m³; Core drilling 138 pcs.; Roofing work: Installing line ventilators in interlocking tile roof 15 pcs.; Sun protection: Venetian blinds for windows 98 pcs.; Locksmith: External staircase 1 pc.; Adjusting balcony railings 15 pcs.; plastering work: lime cement ceiling plaster 462 m²; gypsum ceiling plaster 1250 m²; lime cement wall plaster 152 m²; gypsum wall plaster 1670 m²; screed work: quick cement screed, D= 40-45 mm 1230 m²; floor covering work: linoleum covering 1160 m²; drywall work: dry screed/rock wool insulation panels D= 100 mm 609 m²; plasterboard assembly walls 469 m²; plasterboard installation walls 116 m²; plasterboard sub-ceiling 832 m²; plasterboard suspended ceiling 340 m²; tiling and natural stone work: floor tiles 84 m²; wall tiles 53 m²; carpentry work: tea kitchens 2 pcs.; interior doors office doors 23 pcs.; Damp room doors 14 pieces; metalwork: aluminum frame doors 16 pieces; sheet steel doors including frames 11 pieces; painting work: glass fabric wallpaper + emulsion paint walls 2800 m²; coating suspended plasterboard ceilings 1171 m²; coating steel perimeter frames 44 pieces; coating sheet steel doors with frames 10 pieces; overhaul coatings walls + ceilings 940 m²; industrial floor coating epoxy resin 290 m²; building cleaning work: intermediate and final cleaning 1600 m²; locking system: BKS profile double cylinder 49 pieces; digital double knob cylinder 27 pieces; transponder 100 pieces; panic lock 34 pieces; access control smart relay 11 pieces, programming device + locking plan creation HLS + building automation: -1. And 2nd floor (the ground floor was already prepared in 2018): Dismantling of the complete sanitary installation from the equipment standard for apartments and equipping the building with sanitary facilities for an office building, consisting of dismantling 31 hand basins, 21 toilets/urinals, 12 shower trays and 6 bathtubs with vanity units, shower partitions and small parts, equipping the new toilet areas with 9 hand basins, 11 toilets, 2 urinals, 1 shower tray, 2 sinks, each with support frames, instantaneous water heaters and sanitary accessories and installations for two kitchen sinks, 150 m of PP+SML waste water pipes, 200 m of stainless steel drinking water pipes with press connections and thermal insulation, 16 fire extinguishers with wall boxes, dry riser with three feed-in and 15 extraction points with pipes. -approx. 40 new radiators with approx. 180 m of C-steel pipes. -12 fans for toilet exhaust air in accordance with DIN 18017-3 and one for battery room exhaust air with PPS pipes, four split air conditioning units. -Approx. 350 sprinkler heads, approx. 500 m of sprinkler pipes for a wet and a dry system, sprinkler distributor, a sprinkler station, nitrogen generator. -Building automation with simple monitoring tasks. Electrics: Installation cable NYM-J 3x2.5 mm² various. Installation types approx. 6,000 m, installation cable Nym-j 3x1.5 mm² approx. 3,500 m, cable halogen-free Nhxhx-j-fe180 up to 3x2.5 mm² approx. 2,000 m, installation cable E 30 up to 4x2x0.8 mm approx. 2,300 m, installation distributor 230 VI 250 A indoor installation wall mounting 8 pieces, circuit breaker 1-pole character b 16a 250 pieces, cable tray perforated steel strip galvanized H 60mm W up to 600 mm approx. 300 m, electrical installation duct device installation H/w 60/130mm plastic approx. 650 m, Bap-LED surface-mounted light 35W approx. 154 pieces, LED recessed downlight D=235mm, 16 W approx. 65 pcs., LED safety lights approx. 65 pcs., LED escape sign lights approx. 40 pcs., BMA signal generator optical flashing light approx. 100 pcs., loudspeaker for wall and ceiling mounting up to 2x6 W approx. 110 pcs., data cable Cat. 6a various installation types approx. 12,000 m, data connection box sym. Cat. 6a 2 ports approx. 170 pcs.