Battery Tenders

Details: Description Qty Unit Item Description 64 Units Ipc-hfw2449m-as-led-b-s2  4-mp ½.9” Cmos Image Sensor, Low Luminance And High Definition Image  Output Max 4 Mp (2688x1520) @20 Fps And Supports (2560x1440)@25/30 Fps  H.265 Codec, High Compression Rate, Ultra-low Bit Rate  Built In Warm Light And The Max Illumination Distance Is 50m  Roi, Smart H.264+h.265+, Flexible Coding, Applicable To Various Bandwith And Storage Environment  Rotation Mode, Wdr, 3d Nr, Hlc, Blc, Digital Watermarking, Applicable To Various Monitoring Scenes  Intelligent Monitoring: Intrusion, Tripwire (the Two Functions Support The Classification And Accurate Detection Of Vehicle And Human)  Abnormality Detection: Motion Detection, Video Tampering, Audio Detection, No Sd Card, Sd Card Full, Sd Card Error, Network Disconnection, Ip Conflict, Illegal Access And Voltage Detection  Alarm: 2 In, 2 Out, Audio: 1 In, 1 Out Support Max 256 G Micro Sd Card, Built In Mic 2 Units Ip Ptz 360 25x Zoom 6 Units 10tb Hdd Fro Surveillance 8 Units Pfs3206 4-port Poe Switch (unmanaged)  Two-layer Unmanaged Poe Switch  Cascade Can Be Realized Via Sfp Fiber Port  Mac Auto Study And Aging, Amc Address List Capacity Is 8k  Support Ieee802.3af, Ieee802.3at,hi-poe Standard  Conform Ieee802.3, Ieee802.3u, Ieee802.3ab 6 Units 6port Poe 3006 12 Units Poe Extender Outdoor 1x2 2,400 Meters Cat6 Utp Outdoor Pure Copper 1 Lot Fiber Fig.8 With Msgr, Outdoor (various Area) 1 Lot Fiber Cable 1core Outdoor With Msgr 1 Lot Fiber Splicing 16 Pcs Sfp Module Fiber 4 Units Access Point Antenna For P2p In Remote Area 48 Pcs Fiber Patchcord/pigtail 16 Pcs Fiber Box Small 500 Pcs Fiber Pole E Clip Metal/plastic 6 Units Ups 650va 2 Pcs Hdmi Cable 4k 2 Pcs Ptz Utility Box 2 Pcs Ptz Bracket 64 Pcs Aluminum Camera Utility Box 64 Pcs Aluminum Camera Bracket 1 Pc P2p Tower Antenna To Interior School With Long Range Base Station And Receiver 25 Pcs Pole Clamp 10 Pcs Pole Camera Bracket 1 Pc Network Consumable 1 Lot Electrical 1 Lot Command Center Back Up Power Inverter, 48vdc, 12v 200ah Gel Battery, Automatic Transfer Switch, 10mm Thhn, Ac Breaker, Ac Spd, Metal Enclosure 1 Lot Command Center Computer Table And Chair For 6 Monitors 6 Units Pole Box Outdoor Water Proof Large 1 Lot Led Wall Maintenance Cabling 1 Lot Led Wall Panel Maintenance/software Command Center Videowall Components And Software Programming 1 Unit Server Dss Pro With 128 Cameras License, Dss Pro Comprehensive And Expandable Vms, Flexible And Scalable, Reliable And Powerful Central Management System With Client-server Architechture, 1 Unit Nvd0905dh-41-4k Ultra Hd Network Video Recorder  Designed For Standalone Operator Viewers  H.265+h.265/h.264/mjpeg/mpeg4/mpeg2 Video Decoding  Ultr High Decoding Ability Up To 12mp  2ch Hdmi And 2ch Dvi-i Input, 9ch Hdmi Output  Support 1/4/9/16 Display Split  Support Audio, Alarm, Bi-directional Talk, Rs485  Splicing Screens Control For Zoom/merge/roam/overlay 3 Units Professional Nvr 64 Channel 2u 4k&h.265 Pro Network Video Recorder  Smart H.265+/h.265/smart H.264/mjpeg  Max 320mbps Incoming Bandwith  Supports Raid 0/1/5/10  Up To 12mp Resolution For Preview And Playback  2hdmi/2vga Simultaneous Video Output 9 Units Ls550ucm-ef 55” Fhd Video Wall Display Unit (ultra Narrow Bezel 3.5mm)  Industrial Level Ads Lcd Panel, Suitable For Continuous 24h/7 Operation  Ultra-narrow 3.5mm Bezel-to-bezel Design  Anti-glare Panel, Vivid And Memorable Image Quality  Factory Calibration Technology For High Color Uniformity  Built-in 3d Noise Reduction System And Picture Splicing Function  Abundant Interfaces Hdmi, Dvi,vga, Bnc, Usb Supporting Remote Control By Computer  Professional Thermal Design To Extend Device Lifespan  Built-in Power, Low Energy Consumption, Ultra Quiet  Modular Structure Design, Multiple Installation Modes  Widely Used In Durveillance Center, Command Center, Meeting Room, Commercial Display Scenes, Etc. 9 Pcs 15m 4k Hdmi Cables 1 Assembly Fabricated Wall Frame Support 9 Pcs Tvw02-48f Multi-screen Video Wall Mount For 37”-70” 2 Assembly Vms Client Pc (with Dss Client Software Program)  Intel I5 12th Gen + Compatible Motherboard  16gb Ram Ddr4 Dimm  256gb Ssd + 500gb Hdd  True Rated 650w Psu  Atx/matx Tempered Chassis  Rtx3050 Gpu (4 Display Output)  Mouse And Keyboard Combo 6 Pcs 22” Fhd Led Monitor 2 Pcs Triple Monitor Articulating Mount For 13”-27” (tv12-c034n) 1 Lot Consumables And Other Cables (gypsum Screw, Plastic Tox, Printed Tagging, Electrical Tape, Masking Tape, Cable Tie, Tie Wire, Assorted Connectors, Velcro Tape And Etc.) 1 Lot Installation/commissioning/technical Expertise/transportation/mobilization And Tools/equipments/ 1 Year Maintenance/equipment And Tools And Installation Of Video Wall Cable Setting, Including Software Program Of Camera Mapping

Details: Description I. Implementation And Customization Of The Following Application Systems: -online Assessment And Payment For Real Property Tax (end To End Process) The Online Billing Of Real Property Taxes Is An Online And Real-time Web-based System Accessible Thru Internet Wherein The Registered Real Property Owners Can Access Their Real Property Units (land, Building & Machines) Conveniently Anywhere Using Computer, Laptop And Tablets And Even In Mobile Phone. The System Primarily Computes Unpaid Real Property Taxes For Current Year And Prior Years (if Delinquent) With Corresponding Discounts And/or Penalties And Generates Printable Statement Of Account That Serve As The Billing Statement Similar With The Billing Statement Generated By Land Tax Office. This Facility Can Be Accessible At The Official Website Of An Lgu Or At Specific Site Address. Other Feature Of The System Is The Accessibility Of History Of Payments (subsidiary Ledger) For Viewing. The Online Payment Is Accessible To The Gateway Of Any Bank Using Any Credit/debit Card And Online Bank Transfer Or Any Electronic Wallets. The Online Payment Button Is Embedded In The Website Of The Lgu Same With The Online Billing. The Feature Of The System Includes The Following: • Payment History (subsidiary Ledger) • Statement Of Account • Automatic Computation Of Taxes Due •details Of Taxes And Fees Including Interest/discount • Account Information • Administrators Page • Account Registration • Can Register Owned Real Property Units • Email Verification For Registered Account • Statement Of Account And Subsidiary Ledger Generated In Pdf Format • Users Account Number Automatically Generated By The System • Can Access In All Web Browsers • Frequently Asked Questions • Online Payment Thru Available Payment Gateways • Forgot/reset Password Or Change Password • Generated Billing From Online System Can Be Paid Over The Counter At The Municipal Hall • Online Billing And Payment For Business Tax (end To End Process) The Online Assessment, Payment System Of Business Permit & License System And Online Registration & Preassessment Of New And Renewal Of Business Is A Fast Link Facility Wherein The Taxpayer Will Be Able To Pay Their Taxes Through Internet Using Web Services Of The Municipality. The Online System Will Be Linked To The Payment Gateway, For The Acceptance Of Payment Either Debit Or Credit Card. It Is An Online And Real-time Web-based System Accessible Thru Internet Wherein The Registered Business Can Access Their Records Units Conveniently Anywhere Using Computer, Laptop, Tablets And Mobile Phone. The System Primarily Computes Business Taxes Due For Renewed Business Based On The Declared Gross Sales Equal Or Higher Than The Previous Year Gross Sales. All Documents Attached To The Web-based System Will Be Subject To Verification And Authenticity. The Online Payment Is Accessible To The Gateway Of Any Bank Using Any Credit/debit Card And Online Bank Transfer Or Electronic Wallets. The Feature Of The System Includes The Following: • Payment History (subsidiary Ledger) • Statement Of Account • Details Of Taxes And Fees Including Interest And Discount (if Applicable) • Automatic Computation Of Business Taxes Due • Account Information • Administrators Page •account Registration •can Register Taxpayer’s Business Account •email Verification For Registered Account •users Account Number Automatically Generated By The System •can Access In All Web Browsers, Tablet And Smartphone •frequently Asked Questions •online Payment Thru Available Payment Gateways •forgot/reset Password Or Change Password •generated Billing From Online System Can Be Paid Over The Counter At The Municipal Hall •business Renewal Application Module •business New Application Module •end-user Can Print A Renewal Application Form Via Pdf •attachment Of Supporting Documents Such As Location Sketch, Sec/dti And Other Pertinent Documents Enhancement Of Business Permit And License System For The Inclusion Of Barangay Clearance For Each Barangay And The Update Of Fire Inspection Fees In Compliance With Republic Act 1032 – Ease Of Doing Business. A. Inclusion Of Barangay Clearance For Consolidated Billing Statement • Maintains Reference Tables For The Forty Five (45) Barangays Of The Municipality Of Dulag. • Barangay Taxes /fees Rate Schedule Are Stored By Effectivity Year To Compute The Accurate And Fair Application Of Prevailing Taxes. • Automatically Assess And Computes Barangay Clearance Fees Based On Each Barangay’s Ordinance. • Computation Of Barangay Clearance Fees Based On Area, Ownership Type, Fixed Amount, By Items Declared And Tax Base. • Reference Files For Barangay Plate/sticker Fees As It Is Included In The Computation Of Barangay Clearance Fees In The Barangay. • Barangay Clearances Fees Will Be Reflected In The Mayor’s Permit As To Certify That The Taxpayer Has Paid The Required Fee And Entitled To A Barangay Clearance Certificate For Formal Printing. •option To Print Of Barangay Clearance Certificate With Electronic Signatures, Logos Or Letterhead Of Each Barangay. •weekly, Monthly, Annual And Periodic Barangay Clearance Collection Reports  Automatic Computation Of Fire Fee Ii. Services  Project Management - User’s Hands-on Training Of Staff At Concerned Department - System Warranty Upon Full Acceptance Of All The Systems For A Period Of One (1) Year Iii. Delivery Of The Following Hardware: (web Server For Online Systems)  One (1) Unit Branded Server Hpe Proliant Ml350 Gen11 Form Factor: 4u Tower Processor(s): 4410y (12-core, 2.0 Ghz, 150w) Memory: Hpe 32gb 2rx8 Pc5-4800b-r Smart Kit Network Controller: Broadcom Bcm57416 Ethernet 10gb 2-port Base-t Ocp3 Adapter For Hpe Storage Controller: Mr416i-a/4gb With Smart Storage Battery Hard Drive: Hpe 4.8tb Sas 10k Sff Bc Mv Hdd Pci-express Slots: Default With 4 X8 Pcie 5.0 Slots With Primary Riser Cage Power Supply: Hpe 800w Flex Slot Platinum Hot Plug Low Halogen Power Supply Kit Management: Hpe Ilo Standard Warranty: 3-year Parts, 3-year Labor, 3-year Onsite Support With Next Business Day Response. Hpe Usb Ap/intl Keyboard/mouse Kit Display: Hp 21” Monitor  One (1) Unit Apc Smart Uninterrupted Power Supply 1500va Tower  Third-party Software For Server • Windows Server Standard Edition • Mcafee Anti-virus License  One (1) Unit Netgate Firewall Netgate Sg-2100 Pfense® Security Gateway Appliance Power Cord: Usa Memory: 4gb Ddr4 Storage: 8gb Emmc Flash Software Support: Community Support Max Active Connections: 1,800,000 2.20gbps Router | 964mbps Firewall | 254mbps | Psecvpn

Details: Description Republic Of The Philippines Department Of Health Bicol Center For Health Development January 9, 2025 The Manager __________________________ __________________________ __________________________ Dear Sir/madam: Please Quote Your Lowest Price On The Item/s Listed Below Subject To The General Conditions Stated Below. Definitely, No Cod Payments Shall Be Allowed. Filled Canvass Form Should Be Returned To This Office In A Sealed Envelope. __________________________________________________ Rosa Maria B. Rempillo, Md, Mchm Cese Bac Chairperson Qty. Unit Item & Description Total Abc Unit Cost Total Cost Purchase Of Office Supplies 300 Ream A4 Bond Paper 8.27" X 11.69", 80 Gsm, 500 Sheets 99,000.00 P ___________ P ___________ 10 Unit Calculator, Compact 3,000.00 P ___________ P ___________ 100 Box Clip, Back Fold, 1 1/4" 2,500.00 P ___________ P ___________ 100 Box Clip, Back Fold, 2" 6,000.00 P ___________ P ___________ 50 Piece Correction Tape, 8m 1,000.00 P ___________ P ___________ 10 Piece Document Tray Organizer (3 Layers) 4,000.00 P ___________ P ___________ 25 Box Fastener, Plastic, Non-sharp Edges 2,300.00 P ___________ P ___________ 50 Piece Fine Board, A4, White, 200gsm, 10/sheets/pack 500.00 P ___________ P ___________ 3 Pack Folder With Tab, Plastic, Legal Black, 100 Pcs/pack 900.00 P ___________ P ___________ 3 Pack Folder With Tab, Plastic, A4 Black, 100 Pcs/pack 1,050.00 P ___________ P ___________ 30 Piece Highlighter 900.00 P ___________ P ___________ 20 Bottle Ink For Stamp Pad (blue) 900.00 P ___________ P ___________ 100 Pack Index Memo Tab Sticker Strips, 100 Pcs/pack, Assorted Color 5,000.00 P ___________ P ___________ 5 Roll Laminating Film Roll, 12 Inches, 125/250 Micron, 80-200 Gsm, 50-100meters 5,000.00 P ___________ P ___________ 50 Piece Marker, Permanent Marker, Black Ultra Fine Point 4,000.00 P ___________ P ___________ 50 Piece Marker, Permanent Marker, Blue Ultra Fine Point 4,000.00 P ___________ P ___________ 10 Jar Multipurpose Glue, 200g, White 1,000.00 P ___________ P ___________ 100 Pad Note Pad, Sticky Note, 3" X 3", 100 Sheets 6,000.00 P ___________ P ___________ 18 Piece Office Stapler With Built-in Staple Remover, No. 35 7,200.00 P ___________ P ___________ 50 Box Paper Clips, 100pcs/box, 1 Inch 2,500.00 P ___________ P ___________ 50 Piece Photo Paper, A4, Satin, White, 20/sheets/ Pack, 260 Gsm 500.00 P ___________ P ___________ 6 Piece Puncher, Paper, Heavy Duty 1,200.00 P ___________ P ___________ 50 Piece Record Book, 300 Pages, Size: 214mm X 278mm Min 11,000.00 P ___________ P ___________ 10 Piece Scissor, Asymmetrical 800.00 P ___________ P ___________ 50 Roll Scotch Tape, Transparent, Clear, 1 Inch, Big 750.00 P ___________ P ___________ 100 Piece Sign Pen, 0.5mm Tip, Blue 3,000.00 P ___________ P ___________ 10 Piece Stamp Pad No. 2. Felt Blue 400.00 P ___________ P ___________ 10 Bottle Stampad Ink, Blue 30ml 500.00 P ___________ P ___________ 10 Piece Staple Remover, Claw Type 500.00 P ___________ P ___________ 2 Piece Tape Dispenser, Table Top 300.00 P ___________ P ___________ 50 Roll Tape, Packaging, 48 Mm 1,500.00 P ___________ P ___________ 15 Pack Battery Cell, Triple A, Heavy Duty, 4 Pcs/pack 2,400.00 P ___________ P ___________ 200 Piece Marker, Fine Point, Waterproof, Black 5,500.00 P ___________ P ___________ 200 Piece Marker, Fine Point, Waterproof, Blue 5,500.00 P ___________ P ___________ 100 Piece Sign Pen, Blue 2,800.20 P ___________ P ___________ 100 Piece Sign Pen, Black 2,800.20 P ___________ P ___________ 30 Piece Logbook, 500 Pages 3,600.00 P ___________ P ___________ 100 Piece Expandable Folder (legal), (10pcs/ Pack) 3,300.00 P ___________ P ___________ 20 Pack Expandable Brown Envelope With Garter, Legal Size (10 6,600.00 P ___________ P ___________ 50 Ream Bond Paper, Legal (80gsm, 500 Sheets/ream) 16,500.00 P ___________ P ___________ 50 Piece Clear Book Cover, 20 Transparent Pockets, Any Color, A4 Size 2,800.00 P ___________ P ___________ 50 Piece Clear Book Cover, 20 Transparent Pockets, Any Color, Legal Size 2,800.00 P ___________ P ___________ 20 Piece Data File Box (legal Size) 2,900.00 P ___________ P ___________ 100 Piece Masking Tape, 1 Inch, Big 7,000.00 P ___________ P ___________ 50 Piece Masking Tape, 2 Inch, Big 7,500.00 P ___________ P ___________ 48 Piece Scotch Tape, Transparent, Yellow 1 Inch, Big 1,600.00 P ___________ P ___________ ******* Total: 250,800.40 Subject To The Following Conditions: 1. Subject To Witholding Tax 2. Subject To 5% Retention For Warranty 3. Quotation Exceeding The Approved Budget For The Contract (abc) Php 250,800.40 Shall Not Be Considered For Award. 4. Philgeps Registration Is Required (to Register Log On To Www.philgeps.net) Philgeps Registration No.:______________ (if Applicable) 5. New Suppliers Must Submit The Following Legal, Technical And Eligibility Documents To Be Eligible To Participate In This Procurement Process; (a) Sec/dti Registration Certificate; (d) Philgeps Registration; (b) Mayor's Permit/license; (e) Omnibus Sworn Statement (for Above 50k) (c) Latest Income & Business Tax Return 6. Any Interlineations, Erasures Or Overwriting Shall Be Valid Only If They Are Signed Or Initialled By The Bidder Or His/her Authorized Representative. 7. Submission Of Quotation Is At The Procurement Office, Doh Bicol-chd, Legazpi City. Open Submission May Be Submitted Through Email Address: Canvass @bicol.doh.gov.ph Deadline Of Submission Will Be On: ____________________ @ 9:00am Pr No. 25-01-066 (bsl-snrl) After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. _______________________________________ Name Of Establishment & Telephone No. _______________________________________ Downloaded Thru Doh Bicol Chd Website & Philgeps Signature Over Printed Name Of Manager/ Authorized Representative _______________________________________ Complete Mailing Address _______________________________________ Complete Email Address (pls Write Legibly)

Details: Description Republic Of The Philippines Province Of Camarines Norte Municipality Of Mercedes Bids And Awards Committee Bids And Awards Committee Office, Lgu - Mercedes, Camarines Norte Invitation To Bid For Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte. The Local Government Unit Of Mercedes, Camarines Norte, Through The Trust Fund Intends To Apply The Sum Of Two Million Seven Hundred Twenty-five Thousand Two Hundred Sixty-six Pesos Only (php2,725,266.00) Being The Approved Budget For The Contract (abc) To Payments Under The Contract For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte - Identification Number 401-24-11-1495/1496/1497/1498/1499. Bids Received In Excess Of The Abc Shall Be Automatically Rejected At Bid Opening. 1. The Local Government Unit Of Mercedes, Camarines Norte, Now Invites Bids For The Purchase Of Various Supplies/materials And Equipment, Livelihood Program: Providing Resources For Opportunities And Prosperity Through Empowerment In Lgu-mercedes, Camarines Norte As Follows: Item No. Qty Unit Description Lot 1 - Hardware Tools 1 1 Unit Air Compressor Machine, Motor: 1/2 Hp; No. Of Cylinder: 2; Phase: 1; Pressure: 85 Psi; Capacity 46 Liters; Approximate Dimension: 95-100cm (l) X 31-35cm (w) X 64-70cm (h); Weight: 47kg; Inflation Time: 53min; Air Displacement: 208l/min 2 1 Unit Air Spray Gun, Standard Nozzle:1.4mm, Pattern Width:180-250mm, Paint Capacity:600cc, Suitable For Finishing Coat, Optional Nozzle:1.3-2.5mm, Operating Pressure:2-3.5bar Air Cons:4.2-7.1cfm(119-200l/min)" 3 11 Set Angle Grinder Cutting Disk, 10 Pcs.per Set; Dimensions: Approx. 105mm (4") X 1.2mm (3/64"') X 16mm (5/8") 4 11 Unit Angle Grinder, Rated Input Power: 730w; Wheel Diameter: 4"; Rated Voltage: 220v; Frequency: 60hz; No Load Speed: 12,000 Rpm; Weight: Approximately 1.6kg; Grinding Spindle Thread: M10; Disc Diameter: 100mm X 1 X 16mm, Dimension: 298mm (l), 77mm (w), 102mm (h) 5 7 Pc Chipping Hammer, Item Weight: ‎atleast 13.8 Ounces; Product Dimensions: ‎11" (l) X 1" (w) X 7.5" (h); Material:, Genuine Leather Grip And Forged Steel 6 3 Set Circular Saw With Diamond Blade, 1400w, 185 Mm Blade, Spindle Lock With 24t Diamond Blade 7 3 Pc Claw Hammer, Head Weight: 16oz; Overall Weight: 17oz-23oz; Forged Steel Head; Smooth Face; Fiberglass Handle With Rubber Cushion; Overall Length: 12-14" 8 3 Pc Concrete Chisel, 10'' Forged Steel Chisel 9 3 Pc Crow Bar, 36" Long; Length Tolerance: +- 1/8; Forged Steel Carbon 10 1 Pc Electric Planer; Voltage: 220-240v; Input Power: 1050w; No Load Speed: 1600rpm; Planing Width And Depth: 82x3mm; Heavy Duty Aluminum Base; 11 1 Pc Framing Hammer, Handle Material: Alloy Steel; Item Dimensions: Approximately 16-17" (l) X 5.75-6" (w) X 1.5-2" (h); Item Weight: Atleast 1.4 Pounds 12 1 Unit Gasoline Marine 7hp Speed Type, Single Cylinder; 4 Stroke, Forced Air Cooling; Ohv Displacement (cc): 196 Compression Ratio: 8.5:1 Bore X Stroke (mm): 68x54 Min. Fuel Consumption;395/(kw.h) Valve Clearance: Input Valve: 0.10-0.15mm Idle Speed (rpm): 1400+-140 Max A.c. Output/rpm:3.8/3600 Noise Level:70db (a) Ignition System: Transistorize Magento Ignition Max Torque (n.m/rpm): 10.7/300 Starting System: Recoil Start (recoil Start/electric Starting) 13 10 Pc Hacksaw With Blade, Adjustable Aluminun Alloy Frame With Soft-grip Handle, 90" Adjustable Bladec Angle, 12 Inches (+/- 1/4") Bi-metal Hacksaw Blade, 24 Tpi 14 10 Unit Heavy Duty Corded Drill, Rated Input Power: 750w; Chuck Capacity: Upto 13mm; Drill Capacity: Metal (16mm), Wood (25mm), Masonry (12mm); Dimension: 268mm (l) X 69mm (w) X 192mm (h); Weight W/out Cable: Approximately 1.6-1.8 Kg; Spindle Collar Diameter Of 43 Mm 15 1 Pc Level, Box Beam Style, Material: Alluminum; Dimension: Approximately 24-24.5" (l) X 2-2.6" (w) X 1.2-1.5" (h); Weight: Atleast 0.8 Pounds 16 3 Pc Mashing Hammer, 3 Lb With Fiberglass Handle, Forged Steel Head 17 3 Pc Masonry Hammer, 800g Solid Rubber Head, Fiberglass Core And Bi-material Slip-resistant Handle, 18 3 Pc Masonry Hand Saw, 15" 380mm Carbon Steel 19 3 Pc Masonry Square, 24"x 16"aluminum, 1/8 '' Thick 20 3 Pc Mason's Level, 60cm Aluminum Reinforced Frame 21 3 Tube Mason's Line, #18 Braided Nylon, 500 Ft, 170 Lb Test 22 10 Set Metal Drill Bit Set, Material: High Speed Steel; 19pcs Per Set (1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,6.5mm,7mm,7.5mm,8mm,8.5mm,9mm,9.5mm,10mm); Point Angle:118degree C; Standards: Din 338; Bit Geometry: Standard Twist Bit 23 8 Pc Meter Tape With Magnetic Hook, Blade Material: Nylon Coated Blade; Dimensions: 16ft (l) X 25mm (w) 24 7 Pc Mig Welding Pliers, Overall Length: Atleast 210mm; Material: High Carbon Steel; Handle Material: Thermoplastic Rubber 25 1 Unit Portable Hand Drill, Power Sourced: Battery Powered - 2pc 21 Volt 1500mah Lithium-ion Batteries; Maximum Rotational Speed: 1500 Rpm; Voltage: 21v; Amperage: 1.5 Amps; Chuck Size: 0.38"; Bit Heads Diameters: From 0.8mm - 10mm; Product Dimensions: ‎9.6" (l) X 2.1" (w) X 7.5" (h); Material: ‎plastic, Rubber, Metal; Item Dimensions: Approx. ‎9.6" (l) X 2.1" (w) X 7.5" (h); Item Weight: Atleast ‎2.5 Pounds; Item Torque: 330 Inch Pounds; Inclusions: 1x21 Volt Inspiritech Cordless Power Drill, 2x Rechargeable Battery, 1x English User Manual, 10x Self-drilling Drywall Anchors,10x Screwdriver Bits, 2x Double Ended Bits, 3x Drilling Bits, 1x Magnetic Extension Socket Bit Holder, 10x Anchors With Screws，1x One-hour Fast Charger, 1x Flexible Extension Shaft, 1x Carrying Bag 26 7 Unit Portable Welding Machine, Input Voltage: 220-240; Frequency: 50-60hz; Output Current: 10-220a; Led Display; No-load Voltage: 85v; Max. Output Current: 220a; Diameter Of Electrode: 1.6-3.2mm; Inclusions: 1 Pc Electrode Holder, 1 Pc Earth Clamp With Cable, 27 3 Pc Pull-push Rule, Blade Length 8m/26ft, Blade Width 1", High Impact Abs Case With Durable Rubber, Corrosion Resistant Tru-zero End 28 3 Pc Putty Knife, 3" Stainless Steel With Rubber Handle 29 1 Pc Roofing Hammer: Item Weight: ‎1.25 Pounds; Product Dimensions: Approx. 13.7" (l) X 6.75" (w) X 1.5" (h) 30 1 Unit Sander, Item Dimensions: Approx 11.63" (l) X 5.63" (w) X 6.19" (h); Voltage: 110 Volts; Power Source: Corded Electric; Amperage Capacity:‎ 8.8 Amps; Variable Speed Control Dial (690 -1,440 Ft./min.); Grit Number: 80; Item Weight: Atleast ‎9.5 Pounds; Included Components: ‎belt Sander, 1 Belt, Dust Bag 31 3 Pc Shovel, Rectangular End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 32 3 Pc Shovel, Round End, Tempered Steel Blade (0.8mm Gauge Orv Higher), 17-23 Cm Blade Tip Width,22-28cm Blade Tip Lenght, All Metal Handle, Overall Lenght 100cm-115 Cm 33 1 Pc Speed Square, Material: Cast Aluminum; Size: About 18x18x2cm/7.09x7.09x0.79"; Weight: About 130g; Triangle-shaped 34 3 Pc Spirit Level Bar, Aluminum Frame With Magnet, Size 12" (+-1/8"), With 3 Vials (horizontal, Vertical And 45 Degrees) 35 3 Pc Steel Float/plastering Trowel, Thickness 0.7 Mm, Surface Measurement 280mm X 125 Mm(+/- 1mm), High Carbon Steel, Soliod Forged Steel With Plastic Handle 36 1 Pc Trim Hammer, Handle Material: Wood; Head Material: Alloy Steel; Item Dimensions Approximately: 14-15" (l) X 5-6"(w) X 1-2" (h); Item Weight: Atleast 594 Grams 37 3 Pc Trowel, 280x120mm Stainless Plastering Trowel With Plastic Handle 38 1 Pc Utility Knife, Handle Material: Aluminum; Material: Aluminum Alloy; Weight: 120g/pcs; Blade Size: 19mm (w) X 61mm (h) X 0.6mm (t); Blade Material: Steel; Thickness: Atleast 0.6mm 39 7 Pc Welding Helmet, Auto Darkening Helmet, Power Supply: Battery And Solar Powered; Light Shade: Din9-1;, Dark Shade: Din4; Switching Time: 1/25000s; Delay Time: 0.1-0.8s; Sensitivity Adjustment: Stepless Control; Operation Temperature: -5 Degrees- 55 Degrees; Active Viewing Area: 93mmx43mm; Active Viewing Area Size: (+/- 10mm); Item Weight: Atleast 1.85 Pounds; Package Dimensions: ‎approximately 12-12.4" (l) X 9-9.61" (w) X 7-7.68" (h) 40 7 Set Welding Magnets, 6 Pcs/set, Overall Length: Atleast (3"); Hold Capacity: Up To 25lbs; Arrow Design Supports Angle: 45°, 90°, And 135°; Item Weight: 295g; Package Dimensions: ‎4.88 X 4.72 X 3.98 Inches; ‎material: Steel; Magnets Size: Approximately - Top (1-1.4cm), Bottom (6.5-7cm), Side (7-7.5cm) Thickness (1-1.3cm) 41 1 Set Wood Chisel; 4-piece Set (6mm; 12mm; 19m; 25mm); Tempered Chrome Carbon Steel Blade; Hardened Shank; Rust-resistant, Lacquered Coated Blade; Bi-material Handle 42 3 Pc Wooden Float, 18"x 32", Multi-layered Lot 2 - Food Preparation 1 1 Unit 3 In 1 Burger Griller With Deep Fryer And Steamer, Gas Type; Made Of Stainless Steel And Polished Metal Griddle Plate; Dimensions: Burger Griddle - 18" (l) X 12" (w); Deep Fryer - 8" (l) X 12" (w), Capacity: 2.5 L; Steamer: 11" (l) X 12" (w) 2 6 Unit Barbeque Grill With Sauce Holder And Top Grill, Material: Stainless Steel, Dimension(lwh): 24 In X 12 In X 30 In (3.5 In Grill Pan's Depth) 3 33 Pc Basin; Stainless; Diameter: 22"; Base: 16"; Depth: 7"; Thickness: 1cm 4 47 Pc Beach Umbrella; Round-shaped; Material: Poly Canvass; Diameter: 40""; Pole Stand Length: At Least 45""; Pole Material: Stainless Steel Chrome" 5 6 Pc Boiler Caldero; Big Size & Heavy Duty; Size: Diameter 48cm; Height: 42cm; Makapal, Material: Aluminum 6 6 Pc Boning Knife, 27.3cm, Blade Length:14.6cm, Blade Thickness: 4mm, Wood Handle 7 32 Pc Butcher's Knife; Materials: Stainless; Wood Handle; Size: About 10" 8 29 Pc Caldero With Double Handle; Aluminum Material; Diameter: 46cm; Height: 37cm; With Double Handle; Capacity 5kilos/20l(volume Capacity) 9 48 Set Casserole Set, Stainless Steel, 28, 30 And 32cm Diameter; 16, 18, 20cm Height 10 50 Pc Chef's Knife; About 10 3/4" Long; Material: Stainless Steel; Blade: Full Tang; Riveted Handle 11 56 Pc Chest Cooler, Item Package Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h), Package Weight: ‎5.76kg, Inside Dimensions: 24.95" (l) X 14.58" (w) X 14.77" (h), Material: ‎plastic, Chamber Depth: 24.95", Capacity: 52l, Color: Any Color 12 51 Pc Chopping Board; Thick Wood; 12"x12" 13 6 Pc Cleaver Knife, 11" Stainless Steel, Weight: 310-340g, Blade Size: 6.5 Inches 14 48 Pc Colander; Stainless Steel; 11"diameter; With Stainless Base And Handle 15 6 Unit Digital Weighing Scale ,30kg Capacity,stainless Tray Size: 35x23cm For 30kg Capacity Weighing Scale, Dual - Display : Weight, Unit Price, Amount, High Light Led Display, Rechargeable Battery, Power Supply: Ac/dc Charger (included) 16 47 Unit Double Burner Gas Stove; Stainless Top And Front; Automatic Ignition; Reversible Trivet; Double Detachable Top Burner; Removable Drip Pan; Dimension: 700mm(l) X 390mm(w) X 140mm(h) 17 7 Unit Double Ring Burner; Heavy-duty Cast Iron; Includes Pol Regulator And 1-metre Hose 16750 Btu Brass Valve With Individual Gas Control Minimal Assembly Required Weight; 3.9kg, Material;cast Iron, Dimensions: (lwh) 36cm X 20cm X 9cm, Fuel Type: Lpg Tank Cylinder With Content And Accessories 18 2 Pc Egg Ring, Stainless Steel, 8.5cm Diameter, 1.5cm Height 19 4 Box Face Masks; 3 Ply Non-woven Disposable Earloop Mask; Quantity: 50pcs/box 20 30 Pc Fish Drying Rack, 4-layer, 45x45x66cm, Foldable 21 6 Pc Fish Scaler, 20cm Stainless Steel 22 6 Pc Fish Scraping Tool, 20cm Stainless Steel 23 54 Unit Food Shelve, 2 Layers: Glass Thickness: 3/16 And 1/4, (w-14" X H-17" X L-30"); Adjustable Layer, Material: Glass & Aluminum With Sliding Door, Offer: Screen Sliding Door To Prevent Moisture 24 204 Pc Food Tray With Glass And Stainless Lid/cover, Stainless Body, Rubberized Stand 32x28x10cm 25 12 Pc Food Tray, Flat, Stainless, 60x40x2cm, Depth: 2cm 26 2 Unit Freezer Chest Type, Gross / Net Volume 10.6 Cu.ft. (10 Liters) / 10.1 Cu.ft. (286 Liters), Functionality 3-in-1 Function – Chilling | Freezing | Fast Freezing, Defrosting System: Manual Defrost, Evaporator:aluminum Defrost,led: 6 Led’s, P:2w, Lamp Life: Min. 50,000 Hours, Weight 40 Kg, Dimensions L 63 X W 111.4 X H 84.7 (cm), Key Features: Inverter Compressor, Sliding Glass Door, Embossed Door & Cabinet, Recessed Side Handle (left & Right), Led Light, Removable Gasket , 1x Basket Wire Shelf, 4x Roller Wheel 27 5 Pc Fruit Crate Plastic 21 X 15 X 12 Inches, Heavy Duty Plastic Material, Color : Black 28 37 Pc Frying Pan 14" In Diameter, Cast Iron 29 4 Unit Gas Range, Approx. 55-70cm (l) X 50-60cm (w) X 86-93cm (h); 4-gas Burner; 62l Gas Oven; Button Ignition; Top Glass Lid; Net Weight: Maximum Of 28kg; Pan Support: Light Cast Iron Pan Support 30 1 Box Gloves; 100pcs; Food Grade; Size: Medium(7.5cm); Thermoplastic Elastomer(tpe) Material 31 23 Pc Hairnet With Cap; White; Nylon; Washable 32 1 Unit Industrial Oven Stainless Steel, With Wall Insulator To Minimize Penetration Of Heat To The Walls, With Temperature Gauge, Approx. Outer Dimension: 46.5 X 23.5 X 30 Inches; Oven Stand/rack Is Made Of Metal With Rollers And Braking Systems; Stainless Steel Front Panel, With See Thru Glass; About 4 Inch Thickness Of Walls With 2 Trays Per Deck - 4 Trays Capacity; Gas Type 33 35 Pc Kawa 62 Cm Diameter 18 Cm Height, Aluminum With 2 Aluminum Handles 34 12 Pc Kitchen Apron, Waterproof; Stain Resistant Leather Apron 35 6 Pc Kitchen Scissors, Material: Stainless Steel And Plastic Silicone, Size: 22.5x7.3x1.2cm 36 3 Pc Long Handle Stainless Steel Soup Spoon; Color: Silver; Caliber Length; Approx. 12cm.14cm.16cm.18cm, Handle Length; Approx.45cm(17.72inches) 37 6 Pc Long Wooden Ladle; 14" Stainless Steel 38 58 Set Lpg Tank, 11kg Cylinder With Gas Regulator, 1.8m Hose & Steel Hose Clamp 39 9 Set Measuring Cup (set For Liquid), 1 Measuring Cup With Red Graphics; Made Of Nonporous Glass That Won't Warp, Stain, Or Absorb Odors; Glass Is Preheated Oven, Microwave, Fridge, Freezer & Dishwasher Safe; Dimension: Approx. 7.13" (l) X 6.75" (w) X 4.38" (h); Measuring Capacity: 500ml 40 9 Set Measuring Cups (set For Dry), Smithcraft Stainless Steel Measuring Cups Set Have 8 Cups.the Sizes Are: 1 Cup (240ml), 3/4 Cup (180ml), 2/3 Cup (160ml), 1/2 Cup (120ml), 1/3 Cup (80ml), 1/4 Cup (60ml), 1/8 Cup (30ml), 1/16 Cup (15ml),1 Locking Ring. 41 6 Unit Mini Electric Fan 7.5" - With Base 10'' 69hz 20w (for Bbq), Non-adjustable Height; Any Color; Electric Powered Fan; 3 Blade 42 21 Pc Mixing Bowl Medium, Approx. Diameter: 28cm, Height:11.2cm; Material: Stainless; Capacity: Atleast 4l 43 200 Pc Monoblock Chair Front:monoblock Chair, Front Legs Distance: 355mm Width Seat, With Backrest, Color: Beige, Seat Width :375 Mm, Deapth: 330 Mm, Side Legs Distance Left: 378 Mm, Side Legs Distance Right 378 Mm, Back Legs Distance: 210 Mm, Back Rest Height:779 Mm, Set Back Height: 405 Mm, Seat Height: 376 Mm, Gross Weight: 2.25 Kgs 44 54 Pc Monoblock Table, 36x36 Inches, H- 28 Inches, Color: Beige, Atleast 3mm Thick 45 2 Pc Non-slip Rectangular Chopping Board; Materials:polypropylene Plastic; Approx Length: 40cm; Width: 25cm; Thickness: 0.5cm; Color : White 46 45 Pc Palamigan Container W/ Gripo 15l, Dimension: 31.8x23.8x48.5cm, Material: High Quality Durable Plastic 47 1 Unit Pressure Cooker 50 Liters Capacity, Aluminum Alloy Material, Pressure: 90kpa, Dimension: 44cm Diameter X 47cm Height 48 40 Pc Round Glass Jars With Lid, 220ml 49 41 Pc Sandok, Stainless Steel, 24.7" Length, With Wooden Handle 50 33 Pc Sandok, Stainless Steel, Length: 14" 51 39 Pc Shansi, Stainless Steel, Length: 14" 52 9 Pc Stainless Steel Dough Cutter Scraper Baking Smoother Cake , Approx. Size: 14-15cm (l) X 11.5-12cm (w) And 22cm (h); Material: Stainless Steel 53 41 Pc Stainless Steel Food Tong 14" Length 54 5 Unit Steamer; Aluminum; About 16"/42cm Diameter; 3 Layers With Cover; With Handle Per Layer 55 3 Unit Vacuum Sealer Machine, 220v, 90w, Sealing Width: 270mm, Power Supply: Ac100-240v/50-60hz, Temperature Control Range: 170-210 Celsius, Abs Material, Size: 370*75*50 (mm) 56 15 Pack Vacuum Sealer Storage Pouches | Bpa Free, Commercial Grade For Food Storage & Sous Vides, Size: 17 X 25cm Material: Plastic, 100pcs/pack 57 27 Pc Water Jug/dispenser With Faucet, 5 Gallons, 20 Liters, Color: Blue, Durable And High Quality Plastic Material 58 7 Unit Weighing Scale; Analog; 20kg Capacity; Approx. Dimensions: 6-7" (l); 8-9" (w); 10-11" (h); Dual Unit (kg And Pounds) 59 2 Pc Wide Mouth Funnel, Stainless Steel, Top Opening: At Least 17 X 5.5 X 6cm, Bottom Opening: At Least 13 X 3.7 X 4cm 60 8 Pc Wire Whisk, Large, Stainless, Approx. 14-15" (l) Lot 3 - Fabrication Of Food Cart 1 7 Unit Bicycle With Sidecar: Bicycle Specifications: Bmx Type Bike (frame 1//2 Gi Hd, Rim Set Front X 10 G Wide Jap Hub, Rim Set Rear X 10g Wide Jap Hub, Tire 20 X 2.125 Jumbo, Tube 20 X 2.125, Handle Bar Painted Black, Fork Ex-900 Landing Gear Cp, Head Parts Nikyo/whw, H-post Bmx Ord.m, H-grip Ord. Opc Parts Neco Bearing Type, Opc Plate 36t, Chain Cp Bmx, Freewheel 24t, Pedal Opc Bearing Type, Seat Clamp/s-pin/ S-post P, Saddle With Spring, Footbreak With Spring "full Size" Frame, 175-180mm Cranks Side Car With Provision Of Umbrella And 2 Chest Coolers (52l Capacity) - Dimensions: ‎25.8" (l) X 16.2" (w) X 15.7" (h) Materials: 1/2 J1 Pipe 540, 316 X 1 Flat Square Bar, J1 Pipe De Una 520, 1/4 X 2 Flat Bar, 6203 Gi Set, Tire 20 X 2.125 Jumbo, Note: With Dole, Dilp Logo Fully Painted In A Galvanized Sheet Iron Attached On The Front Of The Sidecar With Approx. 15.7 Inches(h)x15.7 Inches(l) Fully Painted Color: Any Color 2 1 Unit Motorcycle Sidecar (for Fruits And Vegetable Vending): Metal Body, Dimensions L-4ft W-2ft H-2ft, With 17inch Side Wheel 3 11 Unit Negocart With Bicycle Roofing Materials: Bolt & Nut W/ Washer 3/16 X 1 Polycarbonate 6mm X 1.2 X 1.70 Welding Rod Body Materials:tubular 1 X 1 X 1.5;flat Bar 1/8 X 1;flat Bar 2' X 3/8 X 1;plain G.i.;sheet 4' X 8' #26;cylindrical Hinge 1/2" ᴓ;blind Rivets 1/8 X 1/2;cylindrical 1/2;cabinet Handle;cabinet Lock;round Bar 8mm ᴓ;transparents Barrier 1/4 X 4' X 8';welding Rod;stainless Sheet 4' X 8';plain Round Bar 16mm ᴓ: Bicycle Specs: Bmx Type Bike Frame, Front And Rear Free Wheel Hub For Rim Set Single Speed (wheel Set), Tire Size (20"x2.125 Jumbo), Interior Tube (20"x2.125), Bmx Handle Bar, Bmx Fork, Head Parts (h Post, Handle Grip), Chain (single Speed), Pedal (bearing Type), Seat Clamp, Saddle With Spring, Foot Brake (clamp W/ Spring), Crank Pedals (175mm-180mm Cranks) Note: With Dole, Dilp Logo And Tourism Spot At The Front And Side Of Cart, Logo Material: Weather Proof Sticker, Sizes Of Sticker: H-60cm X W-130cm (for Front Of Cart) And H-60cm X W:75cm (for Side Of Cart) Or H-23.6" X W-51" And H-23.6" X W-29.5" Fully Painted Color: Light Blue Lot 4 - Grooming Tools 1 1 Pc All Purpose Comb, 7inch, Plastic Material 2 3 Pc Barber Apron, With Two Pockets, Waterproof, Material: Fiber Size: Approximately 89x69cm - 35x27.2 Inches 3 1 Pc Barber Cape, 140cmx100cm Silk, Waterproof 4 1 Unit Barber Chair, Reclining, Modern Style, Chair Back Height: High-back; Upholstery: Faux Leather; Material: Stainless Steel; Dimension: 21"x22.5"x38" 5 1 Unit Clipper, Cordless, Includes 3 Metal Clip Attachment Comb Cutting Guides, 1/16", 1/8",3/16, 6.25 Inches And Weighs 13 Oz, Equipped With A 2191 Adjustable 0000 Blade 6 2 Unit Curling Iron, 38.5cm, Tourmaline Ceramic, 25-39w, 360 Degree Rotatable 7 2 Set Eyebrow Grooming Kit, 6pcs (2 Eyebrow Razor, 1 Facial Razor, 1 Brush, 1 Scissors, 1 Tweezer) 8 1 Pc Fade Brush, Material: Plastic & Nylon, (hxw) 12.3 X 2.3 Cm, Weight: 0.015 Kg 9 2 Unit Flat Iron, Ceramic Wide Plate, 100-240v Dual Votage, 40-59w, 27.8cm Long 10 2 Unit Hair Blower, 2 Speed - 3 Heat Settings, 2400w, Removable Filter Cover, Cool Shut Function, Dimension: 21.5x8.5x26.5cm 11 1 Set Hair Clips, Plastic, Size: Approximately 7.8cm 12 2 Set Hair Dying Tool Set, (5-pc) Small Brush - 19.5cmx4.5cm, Big Brush - 20.5x6cm, Secondary Comb - 19x5.5cm, Small Bowl - 13x4.5cm, 1 Pair Of Earmuffs 8x4.5cm 13 3 Pc Hair Shear, 6.9 Inch Stainless 14 10 Pc Hair Towel Turban, 49x18cm Microfiber 15 2 Set Make Up Brush Kit, 12 Pcs With Box 16 2 Set Make Up Kit, 35pcs (1 Eyeshadow, 1 Concealer, 4 Osmetic Brush, 3 Lipgloss, 1 Eyebrow Pencil, 1 Pressed Powder, 4 Lipstick, 4 Face Makeup, 1 Lip Balm, 1 12.5cmx19cm Makeup Bag, 1 Eyebrow Cream, 1 Primer, 1 Powder Puff, 1 Mascara) 17 2 Pc Makeup Kit Organizer, 50cmx39.5cmx21.5cm, Black,046 Glittery, Checkered 18 1 Pc Mirror, Double Sided Folding Mirror, (wxh) 24x 37cm, Weight: 0.532 Kg 19 1 Pc Neck Duster, Weight : 100g , Size : 18x7x7cm 20 1 Roll Neck Strips, (28cmx6.5cm) Self Adhesive, Material: Paper 21 4 Set Plastic Hair Roller, 25mm Assorted, 10-pc Large 22 3 Pc Pomade, 80g, Water-based 23 1 Pack Razor Blades, Durable, Stainless, 100 Pcs, (lxwxh) 14x10x1 24 1 Set Shaver, Abs Material,110-220v, Power: 3w, Size: 16.6x5.8cm, Battery Capacity: 600mah 25 2 Pc Shaving Gel, 195g With Aloe 26 2 Pc Talc Powder, 500g 27 1 Set Trimmer, Rechargable, 2 Blades, Power: 50-60 Hz, Voltage:100-240v, Dimension: 11.5x6.5x3cm 28 4 Pc Wide-tooth Comb, 16cm Plastic, Durable 29 1 Pc Wide-tooth Comb, Size: Approximately 21.5x5 Cm, Plastic Material Lot 5 - Sewing 1 7 Set Ball Point Pins, 250 Pcs Per Box With 8 Colors; Durable 2 8 Unit Bobbin Case, Diameter: 20.3mm Width: 11.7mm 3 8 Pc Bobbin, Diameter: 20.3mm Width: 11.7mm 4 4 Set Dressmaker's Shears, Material: Stainless Steel; Item Dimensions: Approximately 0.8" (l) X 3.9" (w) X 10" (h); Blade Length: 8"; Item Weight: Approximately 8.8 Ounces 5 1 Pc Edging/ Overlock Sewing Machine, Metal Material; Overlocker; 1 Stitch; Dimension(lxwxh) 12x13x14 6 3 Pc Electric High Speed Sewing Machine, Power: 90w; Rated Voltage: 220v; Gross Weight: About 7kg; Max Sewing Speed: 1,100 Stiches/min; Materials: Stainless Steel Needle Plate, Metal Frame; Dimensions: Approximately 44cm (l) X 16cm (w) X 28cm (h); Voltage: 220v, Secondary Lifting Height Or Presser Foot: 14mm; Needle Pitch: From 0-4.5mm, Needle Width: From 0-7.0mm 7 4 Pc Flat Iron, 1200w; Stainless Steel Sole Plate; Power Light Indicator; With Steaming/spray Function 8 4 Set French Curve, Dimension(21.65x0.39x7.09); 4.6 Ounce; Made Of Aluminum Or Plastic 9 4 Pc L-square, Material: Stainless; Item Weight: 0.32oz; Product Dimensions: Approx. 14" (l) X 24" (w) 10 1 Pc Manual Sewing Machine With Motor And Foot Controller, Metal Material, Heavy Duty, 9kg Weight, 1 Stitch Dimensions, (lxwxh) 12x13x14 11 4 Unit Meter Stick, Yellow Color; Wood Type 12 4 Pc Needle Threader, Metal Material; Oval Shape; 1 Inch Size 13 31 Pack Sewing Machine Needle, Flat Needles 10pcs/pack 14 11 Pc Sewing Threads 12pcs/box, Material: Cotton; Package Dimensions: Approx. 5.71" (l) X 3.74" (w) X 2.36" (h); Thread Size: Approx. 56mm (h) X 22mm (w); 550 Yards Each Roll 15 25 Pc Tailor’s Chalk, Square Shape; Orange Color;fades Or Brushes Away Easily 16 4 Pc Tape Measure, Material: Durable Soft Plastic; Color: Blue; Measurements: Inches (can Measure Upto 60") And Centimetres (can Measure Upto 150cm) Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 2. Delivery Of The Goods Is Required Ninety (90) Calendar Days Delivery Period And Upon Receipt Of Notice To Proceed And Purchase. Bidders Should Have Completed, Within Two (2) Years From The Date Of Submission And Receipt Of Bids, A Contract Similar To The Project. The Description Of An Eligible Bidder Is Contained In The Bidding Documents, Particularly, In Section Ii. Instructions To Bidders. 3. Bidding Will Be Conducted Through Open Competitive Bidding Procedures Using A Non-discretionary “pass/fail” Criterion As Specified In The 2016 Revised Implementing Rules And Regulations (irr) Of Republic Act (ra) 9184, Otherwise Known As The “government Procurement Reform Act”. Bidding Is Restricted To Filipino Citizens/sole Proprietorships, Partnerships, Or Organizations With At Least Sixty Percent (60%) Interest Or Outstanding Capital Stock Belonging To Citizens Of The Philippines, And To Citizens Or Organizations Of A Country The Laws Or Regulations Of Which Grant Similar Rights Or Privileges To Filipino Citizens, Pursuant To Ra 5183. 4. Interested Bidders May Obtain Further Information From Local Government Unit Of Mercedes, Camarines Norte-bac Secretariat And Inspect The Bidding Documents At The Address Given Below During Office Hours - 8:00 Am-12:00 To 1:00 Pm-5:00 Pm. 5. A Complete Set Of Bidding Documents May Be Acquired By Interested Bidders On December 14, 2024 Until 8:30 Am Of January 6, 2025 From The Address Below And Upon Payment Of The Applicable Fee For The Bidding Documents, Pursuant To The Latest Guidelines Issued By The Gppb, In The Amount Of Five Thousand Pesos Only Php5,000.00. 6. The Local Government Unit Of Mercedes, Camarines Norte Will Hold A Pre-bid Conference On December 23, 2024 9:00am At Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte Which Shall Be Open To Prospective Bidders. 7. Bids Must Be Duly Received By The Bac Secretariat Through (i) Manual Submission At The Office Address Indicated Below, On Or Before 8:30am January 6, 2025. Late Bids Shall Not Be Accepted. 8. All Bids Must Be Accompanied By A Bid Security In Any Of The Acceptable Forms And In The Amount Stated In Itb Clause 14. 9. Bid Opening Shall Be On 9:00 Am Of January 6, 2025 At The Bids And Awards Committee Office- Second Floor Jpl Sports Complex - Municipal Compound, Eco Avenue Street, Barangay 5, Mercedes, Camarines Norte. Bids Will Be Opened In The Presence Of The Bidders’ Representatives Who Choose To Attend At The Address Below. 10. The Local Government Unit Of Mercedes, Camarines Norte, Reserves The Right To Reject Any And All Bids, Declare A Failure Of Bidding, Or Not Award The Contract At Any Time Prior To Contract Award In Accordance With Section 41 Of Ra 9184 And Its Irr, Without Thereby Incurring Any Liability To The Affected Bidder Or Bidders. 11. For Further Information, Please Refer To: Macario B. Totanes Municipal Planning And Development Office Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0998-576-8321 Arsenia M. Ordiales Bac Secretariat Bids And Awards Committee Office 2nd Floor Jpl Sports Complex, Lgu Mercedes Municipal Compound, Barangay 5, Mercedes, Camarines Norte 0908-896-9684 Email Address: Lgubac.mercedes@yahoo.com 12. You May Visit The Website: For Downloading Of Bidding Documents: Www.mercedes.gov.ph December 13, 2024 ________________________________ Macario B. Totanes Bac Chairman

Details: Description 1 Dermatoscope Machine 2 Unit 150,000.00 300, 000.00 Purpose: Used For Examining Skin Lesions And Structures In Detail, Aiding In The Early Detection Of Skin Camcers (like Melanoma) And Other Dermatological Conditions. It Provides High-quality Imaging With Polarized And Non-polarized Light, Enhancing Visualization Of Vascular Patterns, Pigmentation And Subsurface Features. It’s Valuable For Both Contact And Non-contact Dermoscopy, Making It A Vital Tool For Dermatologists And Skincare Professionals. Features And Benefits 10x Magnication With 30mm Viewing Area. Polirized And Non-polirized Modes With High-powered Leds. Long-lasting Battery Life Includes A Leather Pouch, Silicone Sleeve, And Usb Cable Camera Compatibility Having The Ability To Take A Photo Of A Special Case (prior To Excision), With A Camera, Smartphone Or Ipad, Is Powerful. Carbon Cannot Be Attached To Those Devices. Lens Size Three Lens Sizes: 15, 25 Or 30 Mm. Larger Lenses Provide A Greater Field Of View And Distance From The Patient. Technical Specification Polarization Yes Infection Control Yes Spectrum Control Yes Optics Yes Battery Rechargeable Camera-compatible Yes Phone & Ipad-compatible Yes 10 Mm Markings Yes Ø30 Mm 10x Yes Magnification Ø30 Mm 10x Accessories Usb Cable Leather Pouch Silicone Sleeve Eyepiece Icecap Samples Training, Installation And Utilisation Pre-installation Requirements Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Local Clinical Staff To Affirm Completion Of Installation Training End Users & Biomedical/engineer On-site Training And Orientation Upon Installation. On-site Training And Orientation For Machine Handling And Operation. *** Training Of Users In Operation And Basic Maintenance And Calibration Shall Be Provided *** Supplier To Issue Certificate Of Training *** Advanced Maintenance Tasks Required Shall Be Documented User Care*** Unit Layout To Enable Easy Cleaning And Sterilization Of All Surfaces. Warranty And Maintenance Warranty 3 Years Warranty Should Be Provided By The Supplier Parts = At Least 5 Years Maintenance And Service = At Least 2 Years Spare Parts Availability Post-warranty 10 Years Software / Hardware Upgrade Availability Routine Software Updates Should Be Provided Documentation Documentation Requirements *** User, Technical And Maintenance Manuals To Be Supplied In English Language (3 Copies Each) *** Supplier To Describe Any Materials Contained In The Device That Are Classified As Hazardous Under Local Regulations. *** List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. *** List To Be Provided Of Equipment And Procedures Required For Local Calibration And Routine Maintenance *** Certificate Of Calibration And Inspection To Be Provided. *** List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost *** Contact Details Of Manufacturer, Supplier And Local Service Agent To Be Provided Decommissioning Estimated Life Span: 10 Years Life Span Safety And Standards Risk Classification Class B (ghtf Rule 10); Class Ii; Class Ii International Standards Iso 13485:2003 Medical Devices -- Quality Management Systems -- Requirements For Regulatory Purposes (australia, Canada And Eu) 2 Auto-clave (steam Sterilizer) 1 Unit 70,000.00 70,000.00 Purpose : Usteam Sterilizers — Also Known As Autoclaves — Are An Essential Piece Of Equipment In Any Laboratory, Research, Or Healthcare Setting, Ensuring Sterility For Important Equipment And Instruments. Autoclaves Are Available In A Wide Array Of Designs, Each Tailored For Specific Applications, Ranging From Small-scale Laboratory Sterilization To Large-volume Industrial Processes. Features And Benefits Automatic Sterilization Controlled By Computer. Temperature Is Max Up To 134 ºc, Suitable For 4-6 Minutes Rapidly Sterilizing. Safety Protection For Water Lacking. Over-temperature, Over-pressure Automatic Protection. Automatically Cuts Off The Power And Then Alarm After Sterilized. Fully Stainless Steel Structure Technical Specification Chamber Volume 24l(φ270×410) Mm / 6.3gallon Working Pressure 0.22mpa Working Temperature 134ºc (273ºf) Temperature Adjust Range 105-134ºc (221-273ºf) Timer Range 0~60min Heat Average ≤±1ºc Power 1.5kw / Ac110v.60hz Sterilizing Plate 340*200*30mm / 13.4*7.9*1.2'', 3 Pieces Overall Dimension 560*350*500mm / 22.0*13.8*19.7'' Packing Dimension 620*410*570mm / 24.4*16.1*22.4'' G.w 20kg / 44lb N.w 18kg / 39lb Accessories 1 Unit 2kva Avr Training, Installation And Utilisation Pre-installation Requirements Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Local Clinical Staff To Affirm Completion Of Installation Training End Users & Biomedical/engineer On-site Training And Orientation Upon Installation. On-site Training And Orientation For Machine Handling And Operation. *** Training Of Users In Operation And Basic Maintenance And Calibration Shall Be Provided *** Supplier To Issue Certificate Of Training *** Advanced Maintenance Tasks Required Shall Be Documented User Care*** Unit Layout To Enable Easy Cleaning And Sterilization Of All Surfaces. Warranty And Maintenance Warranty 3 Years Warranty Should Be Provided By The Supplier Parts = At Least 5 Years Maintenance And Service = At Least 2 Years Spare Parts Availability Post-warranty 10 Years Software / Hardware Upgrade Availability Routine Software Updates Should Be Provided Documentation Documentation Requirements *** User, Technical And Maintenance Manuals To Be Supplied In English Language (3 Copies Each) *** Supplier To Describe Any Materials Contained In The Device That Are Classified As Hazardous Under Local Regulations. *** List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. *** List To Be Provided Of Equipment And Procedures Required For Local Calibration And Routine Maintenance *** Certificate Of Calibration And Inspection To Be Provided. *** List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost *** Contact Details Of Manufacturer, Supplier And Local Service Agent To Be Provided 3 Cryogenic Handheld Cryosurgery Device (liquid Nitrogen Sprayer System) For Destruction Of Benign Skin Lesions 1 Set 110,000.00 110,000.00 Purpose: Used To Treat Benign Skin Lesions Such As Warts, Skin Tags, And Certain Keratoses. It Applies Extreme Cold To Targeted Areas, Causing Controlled Destruction Of Abnormal Tissue. Features And Benefits The Minimally Invasive Procedure That Uses An Extremely Cold Liquid Or Instrument To Freeze And Destroy Abnormal Tissue That Requires Elimination. It Requires About 1/3 Time Required By Co2 Snow Or N20 To Achieve The Appropriate Degree Of Freezing Because Of The Relative Temperatures(-196°c Compared With -79°c) It Can Be Applied Directly By Spraying The Gun. No Form Of Anaesthesia Is Required For Freezing`; It Can Be Carried Out Single-handed And With No Scarring Results. It Starts Freezing Instantly Because Liquid Nitrogen Is Released Directly On The Internal Metal Probe Wall Which Contacts The Lesion. Portable And Can Be Used In Any Consulting Room. Complete Haemostasis And High Patient Acceptance. A Good Number Of Lesions Can Be Treated At A Time. Carcinoma And Skin Tumours Can Be Treated. Easy To Operate And No Sterilization Is Required To The Tool Or Tips. Technical Specification Durable Stainless Steel And Brass. Capacity: 16 Oz Fingertips Trigger Control, Safely Autovent For Gradual Pressure Release, And A Streamlined Relief Valve For Consistent Freezing. Training, Installation And Utilisation Pre-installation Requirements Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Local Clinical Staff To Affirm Completion Of Installation Training End Users & Biomedical/engineer On-site Training And Orientation Upon Installation. On-site Training And Orientation For Machine Handling And Operation. *** Training Of Users In Operation And Basic Maintenance And Calibration Shall Be Provided *** Supplier To Issue Certificate Of Training *** Advanced Maintenance Tasks Required Shall Be Documented User Care*** Unit Layout To Enable Easy Cleaning And Sterilization Of All Surfaces. Warranty And Maintenance Warranty 2 Years Warranty Should Be Provided By The Supplier Spare Parts Availability Post-warranty 10 Years Documentation Documentation Requirements *** User, Technical And Maintenance Manuals To Be Supplied In English Language (3 Copies Each) *** Supplier To Describe Any Materials Contained In The Device That Are Classified As Hazardous Under Local Regulations. *** List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. *** List To Be Provided Of Equipment And Procedures Required For Local Calibration And Routine Maintenance *** Certificate Of Calibration And Inspection To Be Provided. *** List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost *** Contact Details Of Manufacturer, Supplier And Local Service Agent To Be Provided 4 Portable Electrosurgical Unit With Trolley 1 Unit 200,000.00 200,000.00 Purpose: A Multi-function Electrosurgical Generator With Both Monopolar And Bipolar Modes, Self-diagnostics, And Recall Of Stored Power Settings High Output Terminal For Heavy Desiccation And Fulguration Procedures Requiring High Intensity. Low Output Terminal For Light Desiccation And Fulguration Procedures Requiring Low Intensity And Increased Precision. Features And Benefits High Output Terminal For Heavy Desiccation And Fulguration Procedures Requiring High Intensity. Low Output Terminal For Light Desiccation And Fulguration Procedures Requiring Low Intensity And Increased Precision. Dual Microprocessors: One Microprocessor Controls The Output And Functionality Of The System While The Second Monitors The System And Terminates Activation If A Safety Hazard Is Detected. This Results In Regulated Delivery Of Current While Simultaneously Ensuring Safe Operation. Technical Specification Depth: 4 Inches (102mm) Width: 8.75 Inches (222mm) Height: 7.5 Inches (190mm) Weight: 6 Pounds (2.7kg) Output Power: Low 0-20 Watts (1/10 Watt Increments Up To 10 Watts) High: 0-35 Watts Bipolar: 0-35 Watts Bipolar Forceps Bipolar Forceps Are Designed To Grasp, Manipulate, And Coagulate Selected Tissue. The Electric Current Alternates Between The Two Tips, Reducing The Length Of The Current’s Path And Producing A Precise, Controlled Therapeutic Effect. Foot Control Pencil Autoclavable Pencils Autoclavable, Reusable Hand Control Pencil Reusable 7-900-5 Steam Autoclavable Hand Control Pencil With Power Adjustment Buttons Directly On The Pencil. Hand Control Pencil Autoclavable, Reusable Foot Control Pencil Consumables Pencil Sheaths – Non-sterile 100/box Pencil Sheaths – Sterile 25/box Accessories Sharp Tip Pencil Sheath Fine Needle Electrode Ball Electrode Training, Installation And Utilisation Pre-installation Requirements Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Local Clinical Staff To Affirm Completion Of Installation Training End Users & Biomedical/engineer On-site Training And Orientation Upon Installation. On-site Training And Orientation For Machine Handling And Operation. *** Training Of Users In Operation And Basic Maintenance And Calibration Shall Be Provided *** Supplier To Issue Certificate Of Training *** Advanced Maintenance Tasks Required Shall Be Documented User Care*** Unit Layout To Enable Easy Cleaning And Sterilization Of All Surfaces. Warranty And Maintenance Warranty 2 Years Warranty Should Be Provided By The Supplier Spare Parts Availability Post-warranty 10 Years Documentation Documentation Requirements *** User, Technical And Maintenance Manuals To Be Supplied In English Language (3 Copies Each) *** Supplier To Describe Any Materials Contained In The Device That Are Classified As Hazardous Under Local Regulations. *** List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. *** List To Be Provided Of Equipment And Procedures Required For Local Calibration And Routine Maintenance *** Certificate Of Calibration And Inspection To Be Provided. *** List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost *** Contact Details Of Manufacturer, Supplier And Local Service Agent To Be Provided 5 Medical Surgical Smoke Evacuator Evacuation System For Laser And Electrocautery 1 Unit 200,000.00 200,000.00 Purpose: A Medical Surgical Smoke Evacuator Is A Device That Captures And Filters Smoke Generated During Laser And Electrocautery Procedures. These Devices Are Designed To Protect Patients And Surgical Staff From The Harmful Particles And Toxins In The Smoke: Features And Benefits Automated Alert System When Ulpa Filter Is Not Capturing Plume At 100% And Needs To Be Changed. Wide Range Of Accessories To Configure Based On Procedural Needs And Personal Preferences Can Be Placed On A Mobile Cart Or Accessory Shelf On A Surgical Boom. Laser Sensor Utilizes A Convenient Foot Pedal To Activate The Smoke Evacuator. Rf Sensor Is The First Automatic Sensor System For Surgical Smoke Detection And Evacuation. The Rf Sensor Is Capable Of Detecting Any Cutting Device And Simultaneously Activating The Smoke Evacuator. Technical Specification Power Requirements: 100-240 Vac, Single Phase, And 4.0 A, 47-63 Hz Flow Rate: Open Range: At Least 90 Lpm Lap Range: At Least 18 Lpm Display Indicators: Visual, Visual & Audio, Led Meter, Led Display Lcd Display: With Lcd Display Working Noise: 55db Rotating Speed: 2750/min Output Volume: 3.5-4.2cbm3/hr Power Supply: 220/110v,50/60hz Working Mode: Operate Continuously Consumables Smoke Evacuator Filters Hydrophobic Ulpa Filter W/ Fluid Trap Large Charcoal Filter Accessories Esu Pencils With Integrated Smoke Evacuation Smoke Evacuator Tubing Training, Installation And Utilisation Pre-installation Requirements Requirements For Commissioning *** Supplier To Perform Installation, Safety And Operation Checks Before Handover *** Local Clinical Staff To Affirm Completion Of Installation Training End Users & Biomedical/engineer On-site Training And Orientation Upon Installation. On-site Training And Orientation For Machine Handling And Operation. *** Training Of Users In Operation And Basic Maintenance And Calibration Shall Be Provided *** Supplier To Issue Certificate Of Training *** Advanced Maintenance Tasks Required Shall Be Documented User Care*** Unit Layout To Enable Easy Cleaning And Sterilization Of All Surfaces. Warranty And Maintenance Warranty 2 Years Warranty Should Be Provided By The Supplier Spare Parts Availability Post-warranty 10 Years Documentation Documentation Requirements *** User, Technical And Maintenance Manuals To Be Supplied In English Language (3 Copies Each) *** Supplier To Describe Any Materials Contained In The Device That Are Classified As Hazardous Under Local Regulations. *** List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost. *** List To Be Provided Of Equipment And Procedures Required For Local Calibration And Routine Maintenance *** Certificate Of Calibration And Inspection To Be Provided. *** List To Be Provided Of Important Spares And Accessories, With Their Part Numbers And Cost *** Contact Details Of Manufacturer, Supplier And Local Service Agent To Be Provided Total Amount 880,000.00

Details: This Request For Information (rfi) / Sources Sought Notice Is Issued Solely For Information And Planning Purposes. This Is Not A Solicitation. submission Of Information About Pricing, Delivery, The Market, And Capabilities Is Highly Encouraged And Allowed Under This Rfi For Planning Purposes In Accordance With (iaw) Far 15.201(e). disclaimer this Rfi Is Issued Solely For Information And Planning Purposes And Does Not Constitute A Solicitation. All Information Received In Response To This Rfi That Is Marked As Proprietary Will Be Handled Accordingly. Iaw Far 15.201(e), Responses To This Notice Are Not Offers And Cannot Be Accepted By The Government To Form A Binding Contract. Responders Are Solely Responsible For All Expenses Associated With Responding To This Rfi. sources Sought/rfi Description this Is Not A Solicitation Announcement. This Is A Sources Sought Notice / Rfi Only. The Purpose Of This Sources Sought Notice / Rfi Is To Gain Information About Potential Qualified Sources And Their Size Classification Relative To Naics 333415 (size Standard Of 1,250 Employees). Responses To This Sources Sought Notice / Rfi Will Be Used By The Government To Make Appropriate Acquisition Decisions. After Review Of The Responses To This Sources Sought Notice / Rfi, Further Rfis And/or A Solicitation Or Other Announcements May Be Published. the Department Of Veterans Affairs (va) Is Seeking Sources Capable Of Providing Pharmacy Grade Refrigerators Equivalent To The Brand Helmer Scientific. this Procurement Shall Be A Brand Name Or Equal. Contractors Must Provide Brand Name Or Equal That Meet Or Exceed The Physical, Functional, And Performance Of Listed Salient Characteristics Below. Contractors Shall Show Clear, Compelling, And Convincing Evidence That All Equal To Items Meet All Required Salient Characteristics Including Brand Name And Model Numbers Iaw Far 52.211-6 Brand Name Or Equal. no Remanufactures Or Gray Market Items Will Be Acceptable. Vendor Shall Be An Original Equipment Manufacturer (oem), Authorized Dealer, Authorized Distributor Or Authorized Reseller Verified By An Authorization Letter Or Other Documents From The Oem. clin item Description qty uom 0001 helmer Scientific Iseries Pharmacy Refrigerator Part# Ipr256-gx Or Equal 5 ea salient Characteristics pharmacy Refrigerator Must Have The Following Physical Salient Characteristics: refrigerators Must Be Medical Grade With A Certificate Of Regulatory Compliance. must Have A Touchscreen With User Interface That Is Password Protected And Provides Advanced Monitoring And Information To Ensure Protection Of Stored Product. must Have Audible And Visual Alarms That Include: Power Failure, High And Low Temperature Alarms, Door Ajar, Condenser Temperature, And Low Battery Alerts. must Have Adjustable Audio Alarms With The Ability To Raise Or Lower Volume. must Contain Access Control That Can Provide Data Capture Of Unit Access And Documents How And When Access Occurred. must Have Adjustable Powder-coated Shelves That Are Bacteria-resistant. must Contain Ventilated Shelves And Ventilated Drawers That Can Hold Up To 100 Lbs. at A Minimum, Must Maintain Temperatures Between +2â°c To +10â°c. must Be Certified To Nsf/ansi 456 Vaccine Storage Standard. must Be At Least/minimum Of 25.2 Cubic Feet Capacity. must Have Locking Casters To Allow Ease Of Movement For Cleaning. must Have A Minimum Of One Glass Door With Ada Compliant Full-length Handle. the List Of Pharmacy Refrigerator Characteristics Is Intended To Be Descriptive, Not Restrictive, Of The Supplies/services That Are Required. if Your Company Is Interested And Capable Of Providing The Required Supplies/services, Please Provide The Information Indicated Below. Incomplete Responses To The Questions Below Will Not Be Accepted. Response To This Notice Should Include Company Name, Address, Point Of Contact, Size Of Business Pursuant To The Following Questions: (1) Submit Your Capabilities Statement Illustrating How Your Organization Can/cannot Meet The List Of Salient Characteristics Requirements. For Instances Where Your Company Cannot Meet The Salient Characteristics Requirement(s), Please Explain. For Instances Where Your Company Can Meet The Salient Characteristics Requirement(s), Please Show How Your Company Meets/exceeds Each Requirement. (2) Please Review The List Of Salient Characteristics Requirements And Provide Any Additional Feedback Or Suggestions. If None, Please Reply As N/a. (3) Please Indicate The Size Status And Representations Of Your Business, Such As But Not Limited To: Service-disabled Veteran-owned Small Business (sdvosb), Veteran-owned Small Business (vosb), Hubzone, Woman Owned Small Business (wosb), Large Business, Etc. (4) Is Your Company Considered Small Under The Naics Code Identified In This Rfi? (5) Are You The Manufacturer, Authorized Distributor, And/or Can Your Company Provide A Solution To The Required Supplies/services Described In The List Of Salient Characteristics? (6) If You Are A Large Business, Do You Have Any Designated/authorized Distributors? If So, Please Provide Their Company Name, Telephone, Point Of Contact And Size Status (if Available). (7) If You Re A Small Business And You Are An Authorized Distributor/reseller For The Items Identified Above, Do You Alter; Assemble; Modify; The Items Requested In Any Way? If You Do, State How And What Is Altered; Assembled; Modified. (8) Limitations On Subcontracting: How Does Your Business Ensure Compliance With The Limitations On Subcontracting As Outlined In 13 Cfr § 125.6? (9) Are The Items You Are Identifying/providing Considered Commercial Of The Shelf (cots) Items As Defined In Far Part 2.101 Under Commercial Items? (10) Non-manufacturer Rule: If Applicable, Can You Confirm Your Business Complies With The Non-manufacturer Rule? Specifically, Does Your Company: Provide A Product From A Small Business Manufacturer Or Processor? Not Exceed 500 Employees? Primarily Engage In The Retail Or Wholesale Trade And Normally Sell The Type Of Item Being Supplied? Take Ownership Or Possession Of The Item(s) With Its Personnel, Equipment Or Facilities In A Manner Consistent With Industry Practice? (11) Please Indicate Whether Your Product Conforms To The Requirements Of The Buy American Act? (12) What Is Your Lead Time To Deliver A Single Unit With All Components? Is There Scale In Lead Time With Greater Quantities? Please Elaborate. (13) What Is Estimated Life Span Of Your Solution? What Support/services Does That Entail? (14) Does Your Proposed Equipment Have Fda Clearance? Please Specify What Fda Clearance(s) Have Been Obtained. (15) Does Your Organization Offer A Leasing Solution? Please Elaborate. (16) Does Your Company Have A Federal Supply Schedule (fss) Gsa/nac/sac/bpa/nasa Sewp Or Any Other Federal Government Contract? If So, Please Provide The Contract Number(s). (17) If You Are An Fss Gsa/nac/sac/bpa/nasa Sewp Or Any Other Federal Government Contract Holder, Are All The Items/solutions You Are Providing Information About Available On Your Schedule/contract? Please State If All Or Some Items Are Available On The Contract. (18) General Pricing Of Your Products/solution Is Encouraged. Pricing Will Be Used For The Purpose Of Market Research Only. It Will Not Be Used To Evaluate For Any Type Of Award. (19) Please Provide Your Sam.gov Unique Entity Id/cage Code Number. responses To This Notice Shall Be Submitted Via Email To Melissa.ramirez8@va.gov. Telephone Responses Will Not Be Accepted. Responses Must Be Received No Later Than Friday, January 10th, 2025, By 10:00 Am Pacific Local Time. all Responses To This Sources Sought/rfi Will Be Used For Planning Purposes Only. Responses To This Sources Sought Notice / Rfi Are Not Considered A Request To Be Added To A Prospective Bidders List Or To Receive A Copy Of The Solicitation. If Further Rfis And/or A Solicitation Or Other Announcement Is Issued As A Result Of The Information Provided From This Rfi, All Interested Parties Must Respond To The Specific Posting Separately Iaw The Specifications Of That Announcement.

Details: Description 2 Unit Air-conditioning Unit (preferred American Homes W/ Installation) 135,800.00 2.5 Hp Split-type Wall Mounted Inverter With Temperature Control And Timer Excess Pipe 15meters 1 Unit Air-conditioning Unit (preferred American Homes W/ Installation) 39,900.00 2.5 Hp Window-type Inverter With Temperature Control And Timer 1 Unit Ph Meter W/ Calibration Cert. 49,500.00 230v (tablet Type) Includes Benchtop Docking Station With Electrode Holder Wall Mount Cradle, Usb Cable Hi11310 Glass Body Refillable Ph Electrode With Temperature Sensor Buffer Sachets Solution 5 Vdc Power Adapter 1 Unit Laboratory Refrigerator 32,495.00 Refrigerator With Freezer 415 L Volume Total(liter) 98 L Volume For Freezer(liter) 317 L Volume For Fridge(liter) No Frost Cooling Type With Deodorizer 1 Unit Fire Extinguisher 4,950.00 Abc Dry 20lbs 1 Unit Fire Extinguisher 15,000.00 Hcfc 123 20lbs 1 Unit Laboratory Digital Weighing Scale 27,000.00 Weighing Switching Function Included Operating Temperature Range: -10 To +40℃ Display Unit: Lcd Power Supply: D Dry Cell X 4 Pieces (included For Test) Size: 266 X 303 X 109mm Weighing Tray Size: 247 X 212mm Body Weight: 3.0kg Dustproof, Waterproof Protection: Ip69k Weighing (kg): 3/6 " Minimum Display (g): 1/2" " Powerful Waterproof Type" " Model Number: Fw500c-6" Package Size：330×430×190 Mm　3.6 Kg 1 Unit Microwave Oven 9,430.00 Capacity - 42l Dimension - 544 X 308 X 432 Main Technology Even Heating Additional Benefit Even Defrosting Capacity – 42 Liters Power Output 1200 W Microwave 1350 W Basic Specification Electricity Power 230v/50hz Easy Clean Coating (antibacterial) Turntable Size (mm) Φ360 Out Case Noble Silver Color Out Case Color Noble Silver Trim Of Door /keypad Controller Type Glass Touch Display White Led Door Open Type - Side Swing Function Clock Time Setting Child Lock Quick Start More/less Tastesaver Cooking/defrost Functions Reheat Soften Melt Proof & Warm Inverter Defrost Arabic Menu Weight(kg) Net 12.5 Packed 14.5 Dimension(w X H X D) 544 X 308 X 432 Packed 608 X 331 X 477 5 Unit Laboratory Gown 1,925.00 White ¾ Sleeve (sizes Xxl – Xl – L) 48 Unit T5 Led Tube Light 16,896.00 16w - Length 900mm 2 Unit Timer Switch 11,700.00 Timer Switch Mechanical Type- 10amps / 220v / Item No. : Sul181h / Sul181 D Operating Voltage : Ac 110v/220/240v 50-60hz Power Consumption : 2.5va Contace Capacity : Ac 220v 16a Contact Resistance : ≤50mω Inaulation Resistance : ≥100mω Operating Temperature : -10℃~+55℃ Accuracy : ≤2s/day 25℃ Contact Capacity Lamp Load:1000w Resistive Load:16a/250vac(cosφ=1) Inductive Load:3a/250vac(cosφ=0.6) Working Reserve Time : 150 Hours After Recharging 24 Hours Full Timing Range : 24h Storage Battery : 150h Minimum Setting Unit : 30 Minutes 100 Unit Pp Plastic Bags (clear) 400.00 9x12 Inches / Thickness 0.002 1 Unit Duplex Wire White #14 3,780.00 42 Unit Switch Dual Wall Mount 9,450.00 Switches 2gang 2way Switch Large Button Dimensions: 74mm(w) X 120mm(h) Mounting Center: 83.5mm Voltage: 250v Mode Of Application: Flush Type White 12 Unit Utility Box Surface Type 696.00 Iec Standards Poly Carbonate Plastic Color: White Philippine Standard Size For Electrical Outlets/switches 3 Unit Electrical Tape 174.00 0.16mm X 19mm X 4m 5 Unit Cable Tie Black 1,900.00 12 Inches 100pcs/pack 3 Meters Pdx Wire White #14 195.00 100 Meters Hose Pe 1/2 100meters 3,300.00 2 Unit Teflon Tape 3/4 96.00 3 Unit Pe T Pipe 1/2 357.00 3 Unit Pe Coupling 1/2 282.00 100 Unit Wood Screw 3/4 200.00 1 Lot Chemicals 97,248.00 1 Ptc Agar Agar (pronadisa) 1 Ammonium Nitrate 1 Benzyl Adenine (bap) 1 Boric Acid (ar, Hi Media Grm 575) 1 Ph Buffer Solution (ph 4) 1 Ph Buffer Solution (ph 7) 1 Calcium Chloride 1 Calcium Nitrate, Merck (1 Kg) 1 Cobalt Chloride 1 Copper Sulfate (ar, Hi Media Grm 1045) 1 Ferrous Sulfate 1 Gibberellic Acid – Laboratory Grade 1 Glycine 1 Iba – Laboratory Grade 1 Indole Acetic Acid (aa) – Laboratory Grade 1 Kinetin (1gram) 1 Magnesium Sulfate (ar, Ajax 302) 1 Manganese Sulfate 1 Myo-inositol 1 Naphthalene Acetic Acid (naa) – Laboratory Grade 1 Nicotinic Acid 1 Potassium Hydroxide (koh) 1 Potassium Iodide 1 Potassium Nitrate, Merck 1 Potassium Phosphate 1 Pyridoxine Hcl 1 Sodium Edta 1 Sodium Hydroxide 1 Sodium Molybdate 1 Thiamine Hcl 1 Tween 20 1 Zinc Sulfate 1 Iodine Crystals 1 Ki Powder 1 Etoh Alcohol 95% 1 Lot Other Consumables 8,170.00 2 Scalpel Blades #8 (boxes) 2 Scalpel Blades #10 (boxes) 5 Bleach 1000ml (bottle) 10 Cleaning And Disinfectant Liquid Bottle 500ml 5 Detergent Powder 1kg 20 Hand Bar Antibacterial White Soap 55g 3 Disposable Laboratory Gloves White (m - L – Xl) (assorted) 3 Hand Sprayer 1 Liter Capacity 5 Tissue Paper Roll 10 Rolls Per Pack 10 Wipes (boxes) 111.76 Mm X 213.36 Mm Wipes, 280 Wipes Per Box 5 Ordinary Rubber Band Round 100grams 6cm (boxes) Total 470,844.00

Details: Description Bids And Awards Committee Request For Quotation Rfq-farmescabcity-01-2025 F.a.reyes Memorial Elementary School Through Its Bids And Awards Committee (bac), Hereby Posts A Request For Quotation (rfq) Of The Hereunder Detailed Project. The School Bac Secretariat Will Complete Its Solicitation Of Proposals/canvassing From Legitimate Suppliers Not Later Than January 17, 2025, At 9:00 A.m. Title Of Project Procurement Of School Security Services (january – December 2025) Brief Description/ Specifications Item No. Item Description Qty Unit Unit Cost Total Amt 1 Security Guard Service (1 Guard) 1 Lot 180,000.00 180,000.00 Xxx Grand Total 180,000.00 1. Scope Of Services Security Agency A. The Security Agency Must Be Duly Licensed, Registered, And A Member Of Padpao With Proper Operating Permits And Other Statutory Requirements. It Must Have Been Engaged In The Business For At Least Three (3) Years. B. The Proof Of Paid Remittances For The Following (concerned) Government Agencies: Sss, Philhealth And Pagibig Will Be In The Form Of A Certification Issued By The Said Agencies. C. The Security Agency Will Provide One (1) Security Guards On A Morning Shift Schedule 1. 06:00 Am – 06:00 Pm (morning Shift) D. The Security Agency Will Provide Consistent And Quality Service Through Qualified, Licensed, Bonded, Uniformed, Highly Trained And Armed Security Guards, Who Shall Guard And Protect The Properties And Premises Of Fa Reyes Memorial Elementary School Daily And Guard Shall Be Posted At The Main School Gate And Ensure That No Trespassing Or Other Illegal Activities Are Conducted Within The School’s Premises. E. The Security Agency Shall Secure Ingress And Egress Within The School Premises Of All Persons Or Vehicles, And Things/materials Brought In And Out Of Said Premises Including The Conduct Of Reasonable Check On Persons And Properties As Normally Done In Public Or Private Establishments And Places For Purposes Of Ensuring Safety And Security Against Unauthorized Persons, Vehicles, And/or Things Or Materials. F. The Security Agency Shall Immediately Make The Necessary Reports Of Any Incident To School Management And/or To Other Concerned Authorities For Purposes Of Police And Other Official Investigations. G. The Security Guards Assigned Shall Be Provided With Proper Agency Uniforms And Visible Identification Badges. They Must Also Be Duly Licensed. Security Personnel H. The Assigned Security Guards Must Have Previous Experience Of At Least 3-years And With Adequate Knowledge In Communicating In English And/or Filipino. He/she Must Be Reliable, Honest, And Courteous. I. The Security Guards Must Undergo And Pass The Required Psycho-neuro Examination And Drug Test Conducted By A Reputable Philippine National Police (pnp)/national Bureau Of Investigation (nbi) Accredited Testing Agency. J. The Security Guards Must Be Ready To Perform Other Tasks As May Be Required By The School Management, Related To Security, Safety And Protection Such As Registering Visitors, Inspection Of Bags Or Cargo (in & Out), Inspection Of Vehicles, Escorting Vips And Other Functions. Agency Shall Be Required To Submit A Copy Of The Security Personnel’s 201 Files Including Current Nbi And Police Clearances To Show That Said Personnel Do Not Have Any Record Of Any Criminal Offense. Total Approved Budget For Contract One Hundred Eighty Thousand Pesos Only Contract Duration Up To The Applicable Warranty Period Offered Terms Of Reference I. Specific Deliverables 1. The Prospective Supplier Should Offer A Detailed Proposal/ Quotation Based On The Preceding Table. Ii. Institutional Requirements 1. The Agency Having The Winning Proposal/quotation Shall Coordinate With The School Bac Secretariat. It Shall Likewise Warrant That It Shall Conform Strictly To The Terms And Conditions Of These Terms Of Reference. Iii. Renumeration And Terms Of Payment The Supplier Shall Be Paid On A Monthly Billing Basis Following The Usual Liquidation Procedure Of The Deped Division Of Cabanatuan City. The Payment Schedule Shall Be On The 15th Day Of The Preceding Month Of Duty. Iv. General Conditions 1. All Quotations Must Be In Hard Copy, Typewritten In The Company’s Letterhead, Signed By The Legal/official Signatory/representative Of The Interested Party/service Provider And Submitted To The Designated School Canvasser Or Delivered In A Sealed Envelope To The Bac Secretariat With The Following Address: Fa Reyes Memorial Elementary School Bids And Awards Committee Secretariat C/o The Principal’s Office Brgy. Barrera Highway Cabanatuan City, Nueva Ecija 2. An Electronic Version Of The Quotations/proposals May Be Submitted Thru Email By The Prospective Suppliers/service Providers Provided That The Signed Hard Copies Will Be Furnished Upon Request By The Bac Secretariat. 3. As A Requirement For By Ra 9184 Under Annex “h” Appendix A Of Section 52.1b, Following Attachments Must Accompany The Quotation/proposal: A. Mayor’s Or Business Permit (valid, Up-to-date) B. Clear Philgeps Registration Certificate Photocopy (up-to-date) 4. Include In The Attachment A Copy Of The Security Personnel’s 201 Files Including Current Nbi And Police Clearances To Show That Said Personnel Do Not Have Any Record Of Any Criminal Offense’s 5. Payment Shall Be Prepared Through The School Finance Unit Of Cabanatuan East Central School Upon Receipt Of The Supplier’s Statement Of Account, Subject To Deduction Of Applicable Taxes. 6. All Quotations Shall Be Considered As Fixed Prices And Not Subject To Price Escalation During Contract Implementation. For Further Inquiries, Please Coordinate With: Bac Secretariat Chairman Landline: (044) 464- 0268 Mobile: 09278636277 Email: Norveelette.cajucom@deped.gov.ph 107065fare@deped.gov.ph Cabanatuan East Central School Reserves The Right To Reject Any Or All Quotations/bids, To Waive Any Minor Defects Therein, To Annul The Bidding Process, To Reject All Quotations/bids At Any Time Prior To Contract Award, Without Thereby Incurring Any Liability To The Affected Bidder(s), And To Accept Only The Offer That Is Most Advantageous To The Government. F.a. Reyes Memorial Elementary School Assumes No Responsibility Whatsoever To Compensate Or Indemnify Bidders For Any Expenses Incurred In The Preparation Of Their Quotation/bid. Ric Bernabe Head Teacher I Chairman, Bids And Awards Committee January 13, 2025 Annex “a” Additonal Set Of Technical Parameters Security Services 1. Stability A. Years Of Experience – At Least Three (3) Years B. Liquidity Of Agency - Net Financial Contracting Capacity (nfcc) At Least Equal To Abc C. Organizational Set-up 2. Resources A. No. Of Licensed Firearms – None B. No. And Kind Of Communication Devices – None C. No. Of Licensed Guards – One (1) Licensed Guards 3. Security Plan A. Detailed Measures To Be Undertaken To Ensure That Entry And Exits Of Personnel Are Monitored, Loss Of Equipment, And Valuables Are Minimized, And Threat To Property, Personnel, Students, And Guests Are Secured 4. Other Factors A. Recruitment And Selection Criteria - Neuro/psychiatric And Drug Tests With Proof Of Certificate From Government Accredited Granting Office - Holder Of Valid Security Guard License; - Male, Not Less Than 25 Years Old But Not More Than 55 Years Old; - At Least High School Graduate; - Good Physical And Mental Condition As Attested By A Certificate Issued By A Reputable Testing Institution; - Of Good Moral Character And Free From Any Civil Convictions Or Litigation Involving Theft, Battery, Slander, Public Misconduct, Assault, Or Similar Proceedings. B. Completeness Of Uniform And Other Paraphernalia - Daily Standard Guard Uniform: White Long Sleeves Or Short Sleeves Collar, With Or Without Necktie, Blue Pants, Black Shoes. - Alternate Uniform: Plain White Round Neck Shirt, Blue Pants, Black Shoes. - Flashlight, First Aid Kit, Raincoat

Details: Description Mindanao State University Reference Nos. 015-25/01-02-2025 Fatima, General Santos City Project Name: Location: Request For Quotation __________________________ Date : Company Name January 15, 2025 __________________________ Quotation No. : 046-25 Address Please Quote Your Best Proposal For Item/s Listed Below, Subject To The Terms And Conditions Duly Signed By Your Representative. Terms And Conditions: 1. Mayor's/business Permit 2. Philgeps Registration Certificate 3. Supplier/bidder Previously Submitted Documentary Requirements May Not Submit. 4. All Entries Shall Be Typed Or Written In A Clear Legible Manner 5. No Alternate Quoation/offer Is Allowed, Suppliers Who Submitted More Than One Quoation Shall Be Automatically Disqualified. 6. All Prices Offered Herein Are Valid, Binding And Effective For Thirty (30) Calendar Days Uppon Issuance Of This Document. Alternate Bids Shall Be Rejected. 7. Delivery Period Within Fifteen (15) Calendar Days 8. Price Validity Shall Be For Period Of Thirty (30) Calendar Days. 9.. Bidders Shall Submit Original Brochures Showing Certifications Of The Product Being Offered. 10. In Case Supplie Pro Forma Quotation Is Submitted, Conditions Will Be Governed By The Submitted Signed Terms Of Reference/technical Specifications. Very Truly Yours, Randy P. Asturias, D'eng. Bac Chairman Item Qty Abc Technical Specifications Unit Price Total Amount (to Be Filled Up By The Suppliers) Unit Unit Price Total Amount 1 50 Archfile (long), Blue, Landscape Pcs 2 50 Archfile (long), Blue, Portrait Pcs 3 100 Bactigel, 70% Alcohol, Hypoallergenic, 500ml, Pump Type Bot. 4 20 Box With Cover (balikbayan Box) Pcs 5 200 Retracktable Ball Pen, 0.5mm, Needle Point (black) Pc. 6 200 Retracktable Ball Pen, 0.5mm, Needle Point (blue) Pc. 7 100 Retracktable Ball Pen, 0.5mm, Needle Point (red) Pc. 8 50 Battery Aa, Alkaline, 2pc./pack Pack 9 50 Clip Backfold, 25mm, 12pcs/box Box 10 50 Clip, Backfold, 32mm, 12s/box Box 11 3 Continuous Carbonized 2ply (short) Box 12 200 Correction Tape 8m X 5mm Pc. 13 50 Data File Box, Made Of Chipboard W/ Close Ends Pc. 14 1 Envelope, Brown, A4, 500's Box 15 1 Envelope, Brown, Long, 500's Box 16 2 Envelope, Expanding, Kraftboard, Legal Box 17 1 Envelope, Coin 8 1/2 Kraft Box 18 5 Fingertip Moistener Pcs 19 200 Folder, Kraft, A4 Pc. 20 500 Folder, Legal Pc. 21 300 Folder, Pressboard (green), Legal (expandable) Pc. 22 50 Folder, Pressboard (orange), Legal (expandable) Pc. 23 25 Glue, 250g. Bot. 24 2 Glue (for Library Use/bookbinding) Gal 25 50 Marking Pen, Whiteboard, Black, Fine Pc. 26 50 Marking Pen, Whiteboard, Blue, Fine Pc. 27 50 Marker, Permanent, Black , Fine Pc. 28 50 Marker, Permanent, Blue , Fine Pc. 29 10 Mouse Pad Pc. Page 1 Of 2 30 50 Note Pad, Stick On 3" X 3", 100 Sheets Per Pad Pad 31 50 Note Pad, Stick On 3" X 4", 100 Sheets Per Pad Pad 32 50 Note Pad, Stick On 3" X 5", 100 Sheets Per Pad Pad 33 5 Pamo Thread, White, #15 Roll 34 100 Paper Bond, Substance 20, Short Boxes 35 200 Paper Bond, Substance 20, A4 Boxes 36 200 Paper Bond, Substance 20, Long Boxes 37 100 Paper, Mimeographing, Subs. 18, Short Ream 38 5 Paper, Newsprint Long Colored (long) Apple Green Ream 39 50 Paper Clip, Vinyl W/ Plastic Coat 32mm Box 40 5 Paper, Blue (short) Ream 41 5 Paper, Yellow (short) Ream 42 10 Photopaper A4 Packs 43 5 Puncher Hd Pc. 44 20 Push Pin, Flat Head, 100pcs/box Box 45 5 Pvc Plastic Cover, Legal Packs 46 50 Record Book, 300 Pages Pc. 47 50 Record Book, 500 Pages Pad 48 10 Paste, Water Well Paste 7 Oz (200g.) Bot 49 5 Pencil Sharpener, Rotary Sharpener, Desk Type Pc. 50 20 Photo Paper, 200gsm, Size:210mmx297mm, 10 Sheets/pack Pack 51 20 Plus Multi-purpose Scissors Fit Curve Patel White 6 Inches Sc155 Pcs 52 50 Ring Binder Plastic Spiral Loops 28mm Pcs 53 50 Ring Binder Plastic Spiral Loops 20mm Pcs 54 15 Hd Cutter (big) Pcs 55 10 Rubber Band, 70mm Min Lay Flat, #18 Box 56 200 Sign Pen, Black, Liquid Gel, 0.5 Needle Tip Pc. 57 200 Sign Pen, Blue, Liquid Gel, 0.5 Needle Tip Pc. 58 10 Stamp Pad, Felt, Bed Dimension, 4.5' X 3' Pc. 59 10 Stamp Pad Ink, Blue Or Violet, 50ml Pc. 60 10 Stamp Pad Ink, Black Or Violet, 50ml Pc. 61 50 Staple Remover, Plier Type Pc. 62 15 Stapler No. 10 With Remover Pc. 63 10 Stapler No. 23/10 (10mm) 10's Boxes 64 10 Sticker Paper (white) Packs 65 10 Tape, Double Sided, 2 Inches Roll 66 10 Tape, Duct, 2 Inches Roll 67 30 Tape Masking, 48mm, 50 Meters Length Roll 68 50 Tape, Packaging, 48mm, 50 Meters Length Roll 69 20 Water Well Paste (200g) Jar ***nothing Follows*** Supplies For The 1st Quarter 2025 For Colleges And Offices (procurement) Total Abc ₱622,741.00 Total Amount Instructions: See Attached Specifications/important Instructions For Items. (please Provide Complete Information Below) Page 2 Of 2 Delivery Period : Warranty: Price Validity : We Undertake, If Our Proposal Is Accepted, To Supply/deliver The Goods In Accordance With The Specification And/or Delivery Schedule Unit Purchase/job Order Or A Contract Is Prepared And Executed, This Quotation/proposal Shall Be Binding Upon Us. We Understand That You Are Not Bound To Accept The Lowest Or Any Proposal You May Receive. After Having Carefully Read And Accepted Your General Conditions, I/we Quote You On The Item At Prices Noted Above. _______________________________ Signature Over Printed Name Of Bidder Tel. No. / Cellphone No.: __________ __________________________________ E-mail Address: Signature Over Printed Name Of Canvasser Jma

Description: Amc/amsc: 1g 1 Suitable For Competitive Acquisition. (see Notes 1 And 2) g The Government Has Unlimited Rights To The Technical Rights To The Technical Data, And The Data Package Is Complete. Valid Amcs: 1 And 2. drawings – item Name: Circuit Card Assembly rp001: Dla Packaging Requirements For Procurement rd002, Covered Defense Information Applies ra001: This Document Incorporates Technical And/or Quality Requirements (identified By An 'r' Or An 'i' Number) Set Forth In Full Text In The dla Master List Of Technical And Quality Requirements Found On The Web at: http://www.dla.mil/hq/acquisition/offers/eprocurement.aspx for Simplified Acquisitions, The Revision Of The Master In Effect On The solicitation Issue Date Or The Award Date Controls. For Large acquisitions, The Revision Of The Master In Effect On The Rfp Issue Date applies Unless A Solicitation Amendment Incorporates A Follow-on revision, In Which Case The Amendment Date Controls. rq009: Inspection And Acceptance At Origin rq011: Removal Of Government Identification From Non-accepted Supplies rq032: Export Control Of Technical Data this Item Has Technical Data Some Or All Of Which Is Subject To export-control Of Either The International Traffic In Arms Regulations (itar) Or The Export Administration Regulations (ear), And Cannot Be exported Without Prior Authorization From Either The Department Of State or The Department Of Commerce. Export Includes Disclosure Of Technical data To Foreign Persons And Nationals Whether Located In The United states Or Abroad. This Requirement Applies Equally To Foreign National employees And U.s. Companies And Their Foreign Subsidiaries. Dfars 252.225-7048 Is Applicable To This Data. the Defense Logistics Agency (dla) Limits Distribution Of Export-control technical Data To Dla Contractors That Have An Approved Us/canada Joint certification Program (jcp) Certification, Have Completed The introduction To Proper Handling Of Dod Export-controlled Technical Data training And The Dla Export-controlled Technical Data Questionnaire (both Are Available At The Web Address Given Below), And Have Been approved By The Dla Controlling Authority To Access The export-controlled Data. Instructions For Obtaining Access To The export-controlled Data Can Be Found At: https://www.dla.mil/logistics-operations/enhanced-validation/ to Be Eligible For Award, Offerors And Any Sources Of Supply Proposed for Use Are Required To Have An Approved Jcp Certification And Have been Approved By The Dla Controlling Authority To Access export-controlled Data Managed By Dla. Dla Will Not Delay Award In order For An Offeror Or Its Supplier To Apply For And Receive Approval by The Dla Controlling Authority To Access The Export-controlled Data. rq039: Non-tailored Higher-level Quality Requirements (sae As9100) For manufacturers And Non-manufacturers rt001: Measuring And Test Equipment part Name Assigned By Controlling Agency: Circuit Card Assembly, Phase shifter Driver Electro-static Sensitive Device mil-std-130n(1) Dated 16 Nov 2012. identification Marking Of U.s. Military Property mercury Or Mercury Containing Compounds Shall not Be Intentionally Added To<(>,<)> Or Come In Direct contact With<(>,<)> Any Hardware Or Supplies Furnished under This Contract. Exception: Functional Mercury used In Batteries, Fluorescent Lights, Required instruments; Sensors Or Controls; Weapon Systems; and Chemical Analysis Reagents Specified By Navsea. portable Fluorescent Lamps And Portable Instruments containing Mercury Shall Be Shock Proof And Contain a Second Boundary Of Containment Of The Mercury Or mercury Compound. (iaw Navsea 5100-003d). reference Control Part Number 7624570 Cage 53711 sampling: the Sampling Method Shall Be In Accordance With Mil-std-1916 Or Asq h1331, Table 1 Or A Comparable Zero Based Sampling Plan Unless Otherwise specified By The Contract. If The Applicable Drawing, Specification, standard, Or Quality Assurance Provision (qap) Specifies Critical, Major and/or Minor Attributes, They Shall Be Assigned Verificaiton Levels Of vii, Iv And Ii Or Aqls Of 0.1, 1.0 And 4.0 Respectively. Unspecified attributes Shall Be Considered As Major Unless Sampling Plans Are specified In Applicable Documents. For Mil-std-1916, The Manufacturer may Use The Attribute Or Variable Inspection Method At Their Option Or per The Contract. Mil-std-105/asq Z1.4 May Be Used To Set Sample Lot size, But Acceptance Would Be Zero Non-conformances In The Sample Lot unless Otherwise Specified In The Contract. overall Length: 5.740 Inches Nominal Overall Width: 1.619 Inches Nominal major Components: Connector Assy, Electrical (7624566-2/53711) 1; printed Wiring Board, Phase Shifter Driver, 1; No Keying Pins Special features: No Keying Pin; Model With Keying Pin Is 7624570-1. End Item identification: As-4108/spy Phased Array Antenna critical Application Item iaw Basic Drawing Nr 53711 7624570 revision Nr D Dtd 06/21/2011 part Piece Number: iaw Reference Drawing Nr 53711 7624570 revision Nr F Dtd 02/06/2009 part Piece Number: iaw Reference Drawing Nr 10001 2900594 revision Nr Ae Dtd 12/01/2014 part Piece Number: iaw Reference Drawing Nr 10001 3256939 revision Nr P Dtd 02/28/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624560 revision Nr A Dtd 06/19/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624561 revision Nr B Dtd 01/30/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624562 revision Nr C Dtd 05/08/2019 part Piece Number: iaw Reference Drawing Nr 53711 7624563 revision Nr L Dtd 03/10/2017 part Piece Number: iaw Reference Drawing Nr 53711 7624565 revision Nr Dtd 09/22/2005 part Piece Number: iaw Reference Drawing Nr 53711 7624566 revision Nr G Dtd 02/21/2020 part Piece Number: iaw Reference Drawing Nr 53711 7624567 revision Nr A Dtd 01/15/2007 part Piece Number: iaw Reference Drawing Nr 53711 7624569 revision Nr C Dtd 08/19/2009 part Piece Number: iaw Reference Drawing Nr 53711 7624573 revision Nr D Dtd 10/17/2023 part Piece Number: iaw Reference Drawing Nr 53711 7624574 revision Nr B Dtd 09/07/2011 part Piece Number: iaw Reference Drawing Nr 53711 7624575 revision Nr C Dtd 06/25/2020 part Piece Number: iaw Reference Drawing Nr 53711 7624576 revision Nr D Dtd 11/07/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624578 revision Nr A Dtd 05/15/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624581 revision Nr Dtd 05/13/2004 part Piece Number: iaw Reference Drawing Nr 53711 7624583 revision Nr A Dtd 07/11/2016 part Piece Number: iaw Reference Drawing Nr 53711 7624590 revision Nr A Dtd 02/13/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624591 revision Nr B Dtd 05/23/2017 part Piece Number: iaw Reference Drawing Nr 53711 7624592 revision Nr A Dtd 06/30/2008 part Piece Number: iaw Reference Drawing Nr 53711 7624593 revision Nr C Dtd 05/10/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624596 revision Nr B Dtd 06/28/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624597 revision Nr A Dtd 06/13/2006 part Piece Number: iaw Reference Drawing Nr 53711 7624598 revision Nr C Dtd 05/14/2020 part Piece Number: iaw Reference Drawing Nr 53711 7624599 revision Nr B Dtd 09/07/2011 part Piece Number: iaw Reference Drawing Nr 53711 7624600 revision Nr C Dtd 01/10/2018 part Piece Number: iaw Reference Drawing Nr 53711 7624602 revision Nr C Dtd 01/10/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624603 revision Nr C Dtd 07/01/2010 part Piece Number: iaw Reference Drawing Nr 53711 7624604 revision Nr A Dtd 01/10/2013 part Piece Number: iaw Reference Drawing Nr 53711 7624605 revision Nr Dtd 09/22/2005 part Piece Number: iaw Reference Drawing Nr 53711 8306492 revision Nr B Dtd 08/21/2020 part Piece Number: iaw Reference Drawing Nr 10001 Ws10288 revision Nr Ab Dtd 04/05/2001 part Piece Number: iaw Reference Drawing Nr 10001 Ws10298 revision Nr Dtd 06/29/1983 part Piece Number: please Review The Nsn Listed Above And Provide Any Sources That May Be Able To Manufacture These Items. The Approved Sources For This Nsn Are Currently Listed Above. All Information May Be Submitted Directly To The Contract Specialist Listed Above. This Information Must Be Provided By The Response Date Indicated Above. in Order To Be Considered An Interested Party, Vendors Must Complete And Return The Attached Market Survey To The Contract Specialist Listed Above By The Required Response Date. note: This Project Contains Drawings/specifications. You May Access The Tdp Directly From Cfolders And Searching For The Above Cited Solicitation Number. you May Access Them Only Through The Following Link: Https://pcf1.bsm.dla.mil/cfolders. the Drawings Cannot Be Accessed Through Dibbs. thank You In Advance For Your Assistance.