Western Railway Tender

Providing plug point 16 Amp in concealed manner on separate board with modular accessories - The price shall cover for providing power plug point with modular type universal socket and switch, 16 Amp, 230 Volt, AC on separate board with modular accessories. The accessories 4 shall be of modular type of C&S/MK/North West/L&T/Crabtree/Siemens/Anchor/Legrand/Havell's/Luminous make. The price shall also cover for concealed wiring of plug point with 2.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with 1.5 sq. mm, PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 as earthing wire with all accessories in concealed type of wiring in medium grade PVC conduit and accessories of Precision/Modi/Prestoplast/Gerard make.

Concealed wiring of sub-main with 2.5 sq. mm in PVC conduit - The price shall cover for concealed wiring of sub main with two-wire 5 single core 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in concealed manner as per site requirement in PVC conduit.

Concealed wiring of sub-main with 4.0 sq. mm in PVC conduit - The price shall cover for concealed wiring of sub main with two-wire 6 single core 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in concealed manner as per site requirement in PVC conduit.

Concealed wiring of sub-main with 6.0 sq. mm in PVC conduit - The price shall cover for concealed wiring of sub main with two-wire 7 single core 6.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 and one wire of 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in concealed manner as per site requirement in PVC conduit.

Wiring of light/fan/exhaust fan points in PVC casing-capping/conduit - The price shall cover for wiring of light/fan/exhaust fan point with 1.5 sq. mm, multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to relevant and latest IS 8 and 1.0 sq. mm, single-core, multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in medium grade PVC casing-capping double lock type, ISI marked of make Modi/Precision/Gerard/Prestoplast or medium grade PVC conduit of not less than 19 mm diameter, ISI marked of make Prestoplast/Precision/Modi/Gerard as per site conditions with surface mounted molded polypropylene switch board with modular cover plate of suitable size including switches/angular holders/ceiling rose. Space shall be kept on board to accommodate modular electronic fan regulator. Molded polypropylene switch board shall be as per IS: 14772.

Wiring of sub-main with copper wire, single-core, 2.5 sq. mm - 3 Nos PVC casing-capping - The price shall cover for wiring of three 9 wire sub-main with 2.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in medium grade PVC casing capping of not less than 25 mm size, double lock type, ISI marked of make Prestoplast/Precision/Modi/Gerard.

Wiring of sub-main with copper wire, single-core, 4.0 sq. mm - 3 Nos PVC casing-capping - The price shall cover for wiring of three 10 wire sub-main with 4.0 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 with one wire of 1.5 sq. mm PVC insulated, unsheathed, multi-stranded, FRLS copper conductor of 1100 Volt grade, ISI marked, conforming to IS: 694/1990 in medium grade PVC casing capping of not less than 25 mm size, double lock type, ISI marked of make Prestoplast/Precision/Modi/Gerard.

Fixing, testing and commissioning of ceiling fan - The price shall cover for fixing, testing and commissioning of ceiling fan on existing 11 hook and its connection by FRPVC insulated, flexible copper cord, 1100Volt grade, 24/0.20mm from existing ceiling rose with earth connection. A suitable suspension clamp made from G.I. flat of 40 x 6 mm with MS 'S' shaped hook of diameter not less than 10 mm shall be provided as per site requirement if fan hook is not available and this is included in the scope of work. The ceiling fans shall be supplied by railways at site engineer's office/store.

Providing electronic fan regulator, modular type - The price shall cover for supply, fixing, testing and commissioning of hum-free 12 modular type electronic fan regulator suitable for 80/100-Watt ceiling fan of step type with 'OFF' position, surface/flush type on existing board and its connection from existing supply. Miniature switch type regulators shall not be accepted. The regulator shall be of Anchor-Roma/Cona/ Leader/Crabtree/Legrand/C&S/HPL/Indo Asian/Havells/Standard/Bentec/Elleys/Precision make.

Providing Exhaust Fan, 300 mm sweep, heavy duty with louver/bird guard - The price shall cover for supply of heavy duty, industrial 13 exhaust fan of metal body, 300 mm sweep with bird guard operating on 230Volt, 50 Hz AC supply complete with all accessories of make Crompton Greaves/GEC/ Almonard/Usha/Bajaj. The price shall also cover for fixing, testing and commissioning of the Exhaust Fan on existing pocket with rake bolts/Anchor fasteners of suitable size as per site condition, and its connection from existing ceiling rose with three-core, 24/0.20 mm size, FRPVC insulated, flexible copper wire of 1100 Volt grade.

The price shall cover for supply, erection, testing and commissioning of power unit for Air Conditioner in enclosure with MCB DP 20/25 Amp, 3 KA breaking capacity, DOL starter of 16 - 25 Amp capacity suitable for 1.5/2.0 TR A.C. unit, one No 16/20/25 Amp socket and three-pin plug 1 top, 16/25 Amp of ANCHOR-ROMA/CRABTREE/ NORTH-WEST make with 4.0 sq. mm single core multi-stranded, PVC insulated, unsheathed FRLS copper conductor and 2.5 sq. mm single core multi-stranded, PVC insulated, unsheathed FRLS copper conductor in green colour as earthing wire of 1100 Volt grade, ISI marked, conforming to relevant and latest IS in medium grade PVC casing-capping, double lock type, ISI marked of Modi/Precision/Gerard/Prestoplast make at an approximate distance up to 3 meter or as per site requirement. The colour of enclosure should be in sync with the decor of the room and as decided by site engineer.

Installation, testing and commissioning of split AC - The price shall cover for installation, fixing, testing and commissioning of the split 2 AC as per the site-engineer's instructions/ requirements with all associated wiring, copper piping, existing drain piping, existing MS outdoor stand. This shall also cover for making a hole of suitable diameter in the existing brick masonry/RCC wall for laying of cables, pipes etc from indoor to outdoor unit in a neat and aesthetic manner. The hole shall be sealed with plaster of Paris to prevent entry of insects, rain water, lizards etc. Manufacturer's recommendations/ instructions shall be strictly followed. Split AC shall be supplied by railways from the site engineer's office/ stores.

Providing MCB Distribution Board with incomer MCB TPN, 40 Amp - 1 No and outgoing MCB DP, 20/32 Amp - 8 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated MCB distribution board made from CRCA sheet steel, powder coated with grey 1 finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB TPN, 40 Amp - 1 No and outgoing MCB DP 20/32 Amp - 8 Nos. The board should be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors and termination lugs of suitable capacity for termination of incoming and outgoing wires. The MCB shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/CGL/Schneider/ Havells make.

Providing Distribution Board with incomer MCB TPN, 63 Amp - 1 No, ELCB, three-pole, 63 Amp - 1 No and outgoing MCB DP, 16/32 Amp - 8 Nos - The price shall cover for supply, fixing, testing and commissioning of pre-fabricated MCB distribution board made from CRCA sheet 2 steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The DB shall be equipped with incomer MCB TPN 63 Amp - 1 No, ELCB, three-pole, 30 mA sensitivity, 63 Amp - 1 No and outgoing MCB DP 16/32 Amp - 8 Nos. The board should be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires. The MCB/ELCB shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/CGL/Schneider/Havells make.

Supply, installation, testing and commissioning of Distribution Panel, outdoor type, wall/floor mounted, double door with incomer MCCB, four-pole, 125 Amp - 1 No, outgoing MCCB, four-pole, 63 Amp - 2 Nos and MCB DP, 32 Amp - 6 Nos - The price shall cover for design, 3 supply, installation, testing and commissioning L.T. Distribution Panel fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switch gears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved by site engineer before fabrication. The LT panel shall be indoor, rectangular cubicle type, dust and vermin proof suitable for three- phase, four-wire, 415 Volt, 50 Hz AC supply system and shall confirm to the relevant IS. Detailed technical specifications of the panel are given in Annexure-XX of tender document.

Supply, installation, testing and commissioning of L.T. Distribution Panel with incomer MCCB, four-pole, 400 Amp - 1 No and outgoing MCCB, four-pole, 250 Amp - 2 Nos, MCCB, four-pole, 100 Amp - 3 Nos, MCCB, four-pole, 63 Amp - 3 Nos and MCB TPN, 32 Amp - 6 Nos with multifunctional meter and all accessories - The price shall cover for design, supply, installation, testing and commissioning L.T. Distribution Panel 4 fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switch gears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved by site engineer before fabrication. The LT panel shall be indoor, rectangular cubicle type, dust and vermin proof suitable for three-phase, four-wire, 415 Volt, 50 Hz AC supply system and shall confirm to the relevant IS. Detailed technical specifications of the panel are given in Annexure-XX of tender document.

Providing outdoor type, double-door, Distribution Panel with incomer MCCB, four-pole, 250 Amp - 2 Nos and outgoing MCCB, four- pole, 125 Amp - 6 Nos and MCCB, four-pole, 63 Amp - 2 Nos - The price shall cover for design, supply, installation, testing and commissioning L.T. 5 Distribution Panel fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switch gears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved by site engineer before fabrication. The LT panel shall be indoor, rectangular cubicle type, dust and vermin proof suitable for three-phase, four-wire, 415 Volt, 50 Hz AC supply system and shall confirm to the relevant IS. Detailed technical specifications of the panel are given in Annexure-XX of tender document.

Supply, installation, testing and commissioning of 100 KVAR Automatic Power Factor Correction capacitor panel - The price shall cover for supply, fixing, testing and commissioning of Intelligent Automatic Power Factor Correction (APFC) capacitor panel suitable for 433 Volt AC, 50 Hz, three-phase, four-wire system, floor mounted with base channel made up of 16 SWG CRCA sheets steel, all bolted construction with PU 6 gasket suitable for indoor installation, dust and vermin proof with detachable cable gland plates at the bottom for cable entry, totally compartmentalized with separate compartments for capacitors, with seven-tank process of surface treatment and powder coating with Siemens grey shade and 3.0 mm mounting plate with IP:55 degree of protection incorporating, with auto and manual switching option for individual capacitors. Scope of work includes design, manufacturing, supply, installation, testing and commissioning of APFC Panel of 100 kVAr capacity in five-step, 20 stages. Detailed technical specifications of the panel are given in Annexure-XX of tender document.

Supply, installation, testing and commissioning of L.T. Distribution Panel with incomer MCCB, four-pole, 630 Amp - 1 No and outgoing MCCB, four-pole, 400 Amp - 4 Nos, MCCB, four-pole, 250 Amp - 6 Nos and MCCB, four-pole 100 Amp - 4 Nos with multifunctional meter and all 7 accessories - The price shall cover for design, supply, installation, testing and commissioning L.T. Distribution Panel fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switch gears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved by site engineer before fabrication. The LT panel shall be indoor, rectangular cubicle type, dust and vermin proof suitable for three-phase, four-wire, 415 Volt, 50 Hz AC supply system and shall confirm to the relevant IS. Detailed technical specifications of the panel are given in Annexure-XX of tender document.

Supply, installation, testing and commissioning of Distribution Panel with incomer ACB, EDO, microprocessor based, four-pole, 1000 Amp - 1 No and outgoing MCCB, four-pole, 630 Amp - 4 Nos, MCCB, four-pole, 400 Amp - 6 Nos, MCCB, four-pole, 250 Amp - 6 Nos, MCCB, four- 8 pole, 63 Amp - 2 Nos with multifunctional meter and all accessories - The price shall cover for design, supply, installation, testing and commissioning L.T. Distribution Panel fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switchgears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved by Site Engineer before fabrication. The LT panel shall be indoor, rectangular-cubicle type, dust and vermin proof suitable for three-phase, four-wire, 415 Volt, 50 Hz AC supply system. Detailed technical specifications of the panel are given in Annexure-XX of tender document.

Supply, installation, testing and commissioning of 11 KV, 800 Amp, 26.2 KA/sec indoor Vacuum Circuit Breaker panel type VMX (horizontal draw out and horizontal isolation type), four-panel switch board complete with all accessories - The price shall cover for supply, fixing, testing and commissioning of 11 KV, 500 MVA, 800 Amp, 26.2 KA/second rating one incoming and three outgoing VCB, indoor type, Metal clad horizontal isolation, horizontal draw out type with 230 Volt AC motor operated mechanism with manual operating mechanism suitable for installation 9 in three-phase, three-wire effectively earthed system which should as per sub clause 5.3 of IEC Publication 694 as detailed in IS: 13118/1991 and should be suitable for indoor installation. Mounting of VCB in panel should be rack in and rack out type as per IS: 13118. The design, construction and rating of the VCB should be as per relevant ISS. Each VCB panel (i.e. incoming and outgoing) shall also have arrangement for tripping and indication and alarm arrangement with Buchholz relay, OTI and WTI of transformer. Note - The enclosure of VCB shall be such that all manual operation for operating VCB can be done after closing the doors of VCB to ensure safety of operating personnel. All the spring charging, metering and indication supply to be given from individual PT of each VCB panel. Detailed technical specifications of the H.T. panel are given in Annexure-XX of tender document.

Supply, installation, testing and commissioning of L.T. Distribution Panel with ACB, EDO, microprocessor based, four-pole, 1600 Amp - 4 Nos with under voltage release, multifunctional meter and all accessories - The price shall cover for design, supply, installation, testing and 10 commissioning L.T. Distribution Panel fabricated from 2.0 mm thick M.S. sheet, standard angles, channels etc. as required in design. The drawing, design, switchgears with make and model of the LT panel shall be submitted by the contractor in three copies and got approved by Sr. DEE (Power) Vadodara before fabrication. The LT panel shall be indoor, rectangular-cubicle type, dust and vermin proof suitable for three-phase, four-wire, 415 Volt, 50 Hz AC supply system. Detailed technical specifications of the panel are given in Annexure-XX of tender document.

Providing Distribution Transformer, 800 KVA, 11000/433 Volt, three-phase complete with all accessories and foundation - The price shall cover for supply of 800 KVA, 11000/433 Volt, three-phase, Power Transformer including installation and commissioning. Detailed Technical specifications of the Transformer are given in Annexure-XX of tender document.

Providing copper plate earthing - The price shall cover for providing Copper plate earthing made from copper plate of 600 mm x 600 mm x 3.15 mm thick (approximately) buried at not less than 2.5 m deep in soil along with charcoal and salt layer alternately. The earth connection 12 should be made with PVC insulated stranded copper conductor of 16 mm2 from earth electrode to earthing bus bar/apparatus. The earth pit shall be 4 m away from the other earth pits and at least 30 m away from the earth pit of Lightning Arrestor. The potential difference between earth and neutral of filtered/stabilized source should be less than 2 Volt. The earthing installation should be provided with RCC circular box with cover and G.I. "J" bolts. The earthing should be carried out as per IS 3043/1987 or latest and relevant I.E. regulations. The contractor shall maintain the earth resistance below 0.5 and joint testing report along with railways' representative shall be submitted to the site-in-charge.

Providing G. I. pipe earthing - The price shall cover for digging of suitable size earth pit and supply of material and erecting pipe earthing and its refilling as per Railways' drawing no. EL/111/1/116. The earthing shall generally be governed by IS-3043/1987 or latest. G.I. pipe for the earthing electrode shall be 50 mm nominal bore diameter of 'B' class (medium grade) as per IS 1239/1990 or latest of make Tata/Zenith/Jindal/Surya/Swastik with ISI marked and 3.0 m in length. Proper connecting arrangement with G.I. clamp, G.I. nuts and bolts of 12 mm size shall be provided at the top end of the earthing electrode. 6 SWG G.I. wire with PVC sleeve shall be connected between each point to be 13 earthed and individual earthing station. The scope of work also covers making a groove of suitable depth and width by cutting the existing concrete/tar road/platform surface and it's refilling/plastering as per site requirement after laying of G.I. earth wire. The G.I. earthing wire ends shall be clamped between two G.I washers of sufficient size and properly tightened with G.I. nuts and bolts of 10 mm dia. The earthing electrode pipe shall not project more than 250 mm above ground level. The end sealing G.I cap/funnel shall be provided at the top of the pipe earthing electrode. The circular earthing chamber and top cover should be pre-casted RCC as per drawing and shall be provided at the earthing electrode. Supply of earth electrode, GI wire/strip, clamps, nut-bolts, J-bolts, washers, wire mesh, sleeve, charcoal and salt as per drawing is within the scope of this item. The earth resistance shall be measured and recorded in the presence of railways' representative. This should not be more than 5 . The earth no., date of measurement and earth resistance value shall be painted on the earthing box or a permanent structure in the vicinity of the earth electrode.

Providing G.I. Earth wire, 8 SWG in PVC sleeve along with cable - The price shall cover for supply and laying of soft G.I. wire of 8 SWG covered with black coloured PVC sleeve of superior quality and laid along with PVC LTUG cable properly fixed and connecting earthing terminals of each panel.

Providing catenaries with PVC insulated copper wire, single-core, 4.0 sq. mm - 5 Nos in PVC conduit - The price shall cover for providing catenary with five wires of 4.0 sq. mm single core multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, 1 ISI marked, conforming to relevant and latest IS in PVC conduit of not less than 25/32 mm size (approximate) with junction boxes, ISI marked, make Precision/Gerard/ Modi/Prestoplast. The wiring is to be carried out in such a way that it should provide termination/connection to light/fan point/signages/stalls/ water coolers etc. Necessary heavy duty Bakelite connector strip of 10/16/32 Amp capacity and requisite number of ways to be provided for each point.

Providing catenaries with PVC insulated copper wire, single-core, 6.0 sq. mm - 5 Nos in PVC conduit - The price shall cover for providing catenary with five wires of 6.0 sq. mm single core multi-stranded, PVC insulated, unsheathed FRLS copper conductor of 1100 Volt grade, 2 ISI marked, conforming to relevant and latest IS in PVC conduit of not less than 25/32 mm size (approximate) with junction boxes, ISI marked, make Precision/Gerard/ Modi/Prestoplast. The wiring is to be carried out in such a way that it should provide termination/connection to light/fan point/signages/stalls/ water coolers etc. Necessary heavy duty Bakelite connector strip of 10/16/32 Amp capacity and requisite number of ways to be provided for each point.

Digging of cable trench 600 mm wide and 900 mm deep in all types of soil including hard, rocky etc - The price shall cover for digging of 600 mm wide and 900 mm deep cable trench in all types of soil including soft, rocky as per cable route plan and filling back the trench after laying of cables. This also includes clearing of roots of trees and bushes and other temporary obstructions on the selected route.

Laying of bricks and sand for double cable - The price shall cover for supply and laying of second-class bricks in existing trench to cover double cable from three sides with sand cushion of 100 mm thick below the cables as per Drawing No. S-287 and as per site requirement.

Digging of cable trench in PCC/RCC/hard soil - The price shall cover for digging of cable trench of size 100 x 200 mm deep on concrete/tar road/platform surface and its refilling/plastering after laying of cable in 50 mm diameter HDPE pipe of make Tijaria/Himalyan/Koncept/ Poddar/Unique/Dutron/Reliance/ Baba/Shivam in existing trench. Supply and laying of HDPE pipe, 50 mm diameter is included in the scope of work.

Laying of cable in trench - The price shall cover for laying, testing and commissioning of LTUG armoured cable in existing trench/pipe and its connection at both ends. The cable shall be tested with 500 Volt Megger earth tester before laying it in the trench. The cable cores shall be 6 tested for continuity, absence of cross phasing, Insulation Resistance between conductors to earth/armour and between conductors. The results should be recorded in presence of railways' representative. A composite cable layout plan on ferro-print or computerized print duly laminated in A-4 size should be submitted by the contractor to this office as well as site in-charge after laying of cable. Cables shall be supplied by railways at site engineer's stores.

Laying of cable on wall/cover shed/existing tray with MS clamp - The price shall cover for laying, testing and commissioning of LTUG 7 armoured cable on wall/cover shed/in existing tray and its connection at both ends. The cable shall be tested with 500 Volt Megger before laying it in the tray. The cable cores shall be tested for continuity, absence of cross phasing, Insulation Resistance between conductors to earth/armour and between conductors. The results should be recorded in presence of railways' representative. A composite cable layout plan on ferro-print or computerized print duly laminated in A-4 size should be submitted by the contractor to site engineer and Divisional Office after laying of cable.

Laying of cable in HDPE pipe, 110 mm diameter by pushing method under track/road - The price shall cover for laying, testing and commissioning of LTUG armoured cable in HDPE pipe, 110 mm diameter by pushing method under track/road. Supply of HDPE pipe is included in 8 the scope of work. The HDPE pipe shall be of Tijaria/Himalyan/Koncept/ Poddar/Unique/Dutron/Reliance/Baba/Shivam make. The cable shall be tested with 500 Volt Megger earth tester before laying it in the trench. The cable cores shall be tested for continuity, absence of cross phasing, Insulation Resistance between conductors to earth/armour and between conductors. The results should be recorded in presence of railways' representative. A composite cable layout plan on ferro-print or computerized print duly laminated in A-4 size should be submitted by the contractor to this office as well as site in-charge after laying of cable. Cables shall be supplied by railways at site engineer's stores.

Supply, fixing, testing and commissioning of indoor/outdoor type, heat shrinkable, cable end termination kit for three-core, 11 KV, 95 sq mm cable - The price shall cover for supply, jointing, testing and commissioning of 11 KV indoor/outdoor type heat shrinkable cable end box for 9 11 KV, three-core, 95/185 sq. mm, XLPE cable of DENSON/M-SEAL/CCI/RAYCHEM/SUPERSEAL make. The individual cores of the cables shall be properly identified to avoid cross connections of the core while connecting them to the corresponding phases. The contractor shall engage skilled cable jointer for making the end termination and it should be provided only in presence of Railways' representative after taking proper shut down. For termination of cable, proper size of cable gland and lugs shall be provided. The cable shall be tested with a 5000 Volt Megger before and after preparation of joint and the values shall be recorded jointly.

Supply, fixing, testing and commissioning of indoor/outdoor type, heat shrinkable, cable end termination kit for three-core, 11 KV, 185 sq mm cable - The price shall cover for supply, jointing, testing and commissioning of 11 KV indoor/outdoor type heat shrinkable cable end box for 10 11 KV, three-core, 185 sq. mm, XLPE cable of DENSON/M-SEAL/CCI/RAYCHEM/SUPERSEAL make. The individual cores of the cables shall be properly identified to avoid cross connections of the core while connecting them to the corresponding phases. The contractor shall engage skilled cable jointer for making the end termination and it should be provided only in presence of Railways' representative after taking proper shut down. For termination of cable, proper size of cable gland and lugs shall be provided. The cable shall be tested with a 5000 Volt Megger before and after preparation of joint and the values shall be recorded jointly.

Providing lighting controlling board with time switch and contactor - The price shall cover for supply, fixing, testing and commissioning of lighting control board fabricated from CRCA sheet steel, powder coated with grey finish, dust and vermin proof, water resistant with metallic door complete with MCBs of 10 KA breaking capacity. The board shall be equipped with MCB DP, 10 KA breaking capacity, 32 Amp rating - 1 No, Time 1 switch, 16 Amp - 1 No and Single-phase contactor of rating 32 Amp - 1 No. The MCB shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/Schneider/CGL/Havells make, the contactor shall be of L&T/BCH/C&S/CGL/Schneider/Siemens make and Digital Time Switch "CRONO" of L&T make or similar of Siemens/Minilec make. The board shall be completely wired with multi-stranded copper wire of suitable capacity and shall be provided with heavy duty connectors of suitable capacity for termination of incoming and outgoing wires and shall be provided with two nos of earthing terminals on each side of the board and riveted metallic caution board in three languages.

Providing LED batten fitting, 1 x 18/20 Watt complete with four-feet LED tube - The price shall cover for supply of 1 x 18/20-Watt LED batten fitting. The fixture shall be of CRCA channel finished with white polyester powder coating with high UV and corrosion resistance. The fixture 2 shall be equipped with end caps, push fit type lamp holders and mains connector to directly fix 4 feet long LED tube. The LED lamp shall be of 18/20 Watt as per Western Railways' specification no. WR/CCG/Specification/P/001 (Rev. 01) - 2018. The tube shall be of polycarbonate material. The entire fixture shall be of reputed quality and make. The price shall also cover for fixing testing and commissioning of the complete fitting at site by means of bracket made from GI flat of 25 x 3 mm with nuts, bolts and washers or on heavy duty, ISI marked PVC square box as per site requirement. Connection shall be given by means of 24/0.2 mm three-core flexible copper wire through connector and heavy duty flexible PVC conduit. Removal of existing fittings along with brackets and handing over the same to the site in-charge is included in the scope of work.

Providing LED module, 2 feet x 2 feet, 38 Watt, ±3 Watt with all accessories - The price shall cover for supply, fixing, testing and 3 commissioning of eco-friendly, maintenance free and energy efficient LED module 2 feet x 2 feet of 38 Watt ±3 Watt made from CRCA housing with high efficiency diffuser for full glow and constant current electronic driver suitable for 220 - 240 Volt, 50 Hz AC supply as per Western Railways' specification no. WR/CCG/Specification/P/001 (Rev. 01) - 2018. The fitting shall be suitable for recessed mounting arrangement. Removal of existing fittings and handing over the same to the site in-charge is included in the scope of work.

Providing LED Street light luminaries of 45 Watt, ± 10% complete with all accessories - The price shall cover for supply of 45-Watt (±10%) LED Street Light fitting made from pressure die-cast LM6/ADC12/LM24 housing with optimal heat sink for better thermal dissipation and toughened glass or UV stabilized polycarbonate cover with high transmission index for superior light output. The fitting shall be as per Western Railways' specification no. WR/CCG/Specification/P/001 (Rev-01)-2018 of reputed quality and make. The fitting shall be designed for IP: 65 class 4 protection for pole/bracket mounting. The fitting shall be provided with special moisture proof vent. The fitting shall be of reputed quality and make. The price shall also cover for fixing, testing and commissioning of the above street light fitting on pole/truss/roof/wall by fabrication and supply of 'B' class G.I. pipe of required length, diameter and shape and fixed with M.S. clamps made from M.S. flat of 40 x 5 mm size duly painted with nut, bolts and washers of 12 mm diameter. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire of size 24/0.20 mm from the existing overhead line/catenary/junction box as per site conditions. The connection cord shall be protected by suitable size of heavy duty flexible PVC conduit. Removal of existing fittings along with pipe and clamps and handing over the same to the site in-charge is included in the scope of work.

Supply, fixing, testing and commissioning of LED flood light luminary, 50 Watt - The price shall cover for supply of energy efficient LED flood light luminary 50-Watt capacity having pressure die cast aluminium housing, toughened front glass cover, fitted with secondary optics, heat sink and integrated electronic driver for long life with IP 65 protection class for provision on high masts. The fitting shall operate on 240 Volt, 50 Hz AC 5 supply and shall be as per Western Railways' specification no. WR/CCG/Specification /P/001 (Rev-01)-2018. The price shall also cover for fixing, testing and commissioning of the above flood light luminary on pole/truss/roof/wall/high mast by fabrication and supply of 'B' class G.I. pipe of required length, diameter and shape and fixed with M.S. clamps made from M.S. flat of 40 x 5 mm size duly painted with nut, bolts and washers of 12 mm diameter. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire of size 24/0.20 mm from the existing overhead line/catenary/junction box as per site conditions. The connection cord shall be protected by suitable size of heavy duty flexible PVC conduit.

Supply, fixing, testing and commissioning of LED high bay luminary, 160 Watt - The price shall cover for supply of energy efficient LED high bay luminary 160-Watt capacity having pressure die cast aluminium housing, toughened front glass cover, fitted with secondary optics, heat sink and integrated electronic driver for long life with IP 65 protection class for provision on high masts. The fitting shall operate on 240 Volt, 50 Hz AC 6 supply and shall be as per Western Railways' specification no. WR/CCG/Specification /P/001 (Rev-01)-2018. The price shall also cover for fixing, testing and commissioning of the above high bay luminary on pole/truss/roof/wall/high mast by fabrication and supply of 'B' class G.I. pipe of required length, diameter and shape and fixed with M.S. clamps made from M.S. flat of 40 x 5 mm size duly painted with nut, bolts and washers of 12 mm diameter. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire of size 24/0.20 mm from the existing overhead line/catenary/junction box as per site conditions. The connection cord shall be protected by suitable size of heavy duty flexible PVC conduit. Removal of existing fittings along with pipe and clamps and handing over the same to the site in-charge is included in the scope of work.

Design, supply, erection, testing and commissioning of 16 meter High Mast complete with all accessories as per technical data along with 6 Nos of 200-Watt LED flood light luminaries - The scope of this specification covers the manufacture, transport, installation, testing and commissioning of the Raising and Lowering type of High mast towers, including the Civil Foundation Works. All items required for the safe and efficient operation and maintenance of the lighting system including the high- mast, whether explicitly stated in the following pages or not, shall be included in the contract. The price shall cover for design, supply, installation, testing and commissioning of 16 meter high mast including all accessories like electrical control panel for hoist motor etc. The work shall be done under the supervision of OEM or authorized representative as per 7 manufacturer's design and drawings. Certificate to this effect may be put in record. Structure and foundation shall be designed for providing minimum twelve nos. of flood light fittings on the high mast considering area wind pressure. Contractor should submit the manufacturer design and drawings before execution of work. The price shall also cover for supply of energy efficient LED flood light luminary 400 Watt capacity having pressure die cast aluminium housing, toughened front glass cover, fitted with secondary optics, heat sink and integrated electronic driver for long life with IP 65 protection class for provision on high masts. The fitting shall operate on 240 Volt, 50 Hz AC supply and shall be as per Western Railways' specification no. WR/CCG/Specification/P/001 (Rev-01)-2018. The scope of work also includes fixing, testing and commissioning of the above flood light luminary on high mast with M.S. clamps of suitable size duly painted with nut, bolts and washers of 12 mm diameter. The connection shall be carried out through ISI marked, PVC insulated, flexible three-core copper wire of size 24/0.20 mm from the existing junction box. Detailed technical specifications of the High Mast are given in Annexure-XX of tender document.

Providing Air Circulator Fan, 750 mm sweep - The price shall cover for supply of heavy duty, wall mounted, Air Circulator fan, 750 mm sweep (approximately) having aluminium alloy one piece blade, double ball bearing, 90° oscillation, sturdy, closed mesh guard, single phase motor, 1 to work on 230 Volt, 50 Hz single phase AC supply of Almonard/Usha/GEC/Crompton Greaves/Bajaj/Havells make. The Air Circulator fan shall be provided with three core FRPVC copper flexible cord 48/0.20 mm size of suitable length. The Air Circulator shall be fitted on the structure/wall/pillar by providing M.S. clamp of 50 x 5 mm made from M. S. flat duly painted with two coats of anti-corrosive red oxide and two coats of silver enamel paint by providing proper rake bolts. The circulator shall be connected with existing supply point as per site conditions.

Providing 20 Amp ray roll plug and socket with MCB DP, 16/20 Amp in weather proof box - The price shall cover for supply, erection, 2 testing and commissioning of power plug board with one MCB DP 16/20 Amp, ray-roll socket 16/20 Amp and LED indication lamp in weather proof MS enclosure. The MCB shall be of ABB/L&T (Hagar)/HPL/GE/MDS/Siemens/BCH/C&S/CGL/Schneider/Havells make. The colour of MS enclosure should be in sync with the decor of the room and as decided by site engineer. The MS enclosure shall be properly earthed.

Supply, fixing, testing and commissioning of three-phase ray roll socket, 32 Amp with MCB TPN, 32 Amp and socket five-pin, 32 Amp with enclosure - The price shall cover for supply, fixing, testing and commissioning of three-phase power plug and socket, 32 Amp of BCH/L&T/SIEMENS/HPL make with MCB TPN, 32 Amp, five-pin, 440 Volt with suitable enclosure, insulated type and should be vermin proof suitable for indoor/outdoor mounting and suitable for three-phase, four-wire 415 Volt, 50 Hz supply system. The box shall be internally wired by suitable size PVC insulated, single core flexible copper multi-strand wire with copper crimping lugs. The box shall be securely mounted on cover shed pillars/wall with necessary M.S. clamps, nuts, bolts etc. The drawing, design of plug socket, switchgears with make and model shall be approved by field in- charge before supply the material.

Supply, fixing, testing and commissioning of three-phase ray roll socket, 63 Amp with MCB TPN, 63 Amp and socket five-pin, 63 Amp with enclosure - The price shall cover for supply, fixing, testing and commissioning of three-phase power plug and socket, 63 Amp of BCH make 4 (Cat. No. DS6A7A1) or similar model of L&T/SIEMENS/HPL with MCCB TPN 63 Amp, five-pin, 440 Volt with suitable enclosure, insulated type and should be vermin proof suitable for indoor/outdoor mounting and suitable for three-phase, four-wire 415 Volt, 50 Hz supply system. The box shall be internally wired by suitable size PVC insulated, single core flexible copper multi-strand wire with copper crimping lugs. The box shall be securely mounted on cover shed pillars/wall with necessary M.S. clamps, nuts, bolts etc. The drawing, design of plug socket, switchgears with make and model shall be approved by field in-charge before supply the material.

Providing DSL for crane - The price shall cover for supply, fixing, testing and commissioning of outdoor type DSL for EOT Cranes. The 5 DSL shall consist of four conductors (three phases and neutral). The DSL shall be fabricated from MS angle of size 50 x 50 x 6 mm, suitably spaced with required number of brackets and insulators, current collectors etc. The DSL shall be designed for carrying approximately 160 Ampere current at 440 Volt, AC system.

Supply, fixing, testing and commissioning of 3.0-meter height G.I. Street light octagonal pole, double arm complete with all accessories and foundation - The price shall cover for supply, erection and commissioning of 3.0 meter height double arm, G.I. street light octagonal 6 pole as per the below mentioned specifications. G.I. Octagonal pole of 3.0-meter height, Top - 70 mm diameter, Bottom - 130 mm diameter and 3 mm thickness sheet. Base plate of minimum dimension 200 x 200 x 12 mm, foundation bolts (4 Nos with 3 Nos of nuts and washers in each), 500 mm long standard double arm bracket for mounting the light fittings, Bakelite sheet with one MCB SP, 6 Amp and 16 sq. mm stud type connector (4 Nos) inside the pole at door opening for cable connection, common templates minimum for 15 poles. Detailed specifications of Galvanized Octagonal poles are given in Annexure-XX of tender document.

Supply, fixing, testing and commissioning of 5.0-meter height G.I. Street light octagonal pole, single arm complete with all accessories and foundation - The price shall cover for supply, erection and commissioning of 5.0 meter height single arm, G.I. street light octagonal pole as per 7 the below mentioned specifications. G.I. Octagonal pole of 5.0-meter height, Top - 70 mm diameter, Bottom - 130 mm diameter and 3 mm thickness sheet. Base plate of minimum dimension 200 x 200 x 12 mm, foundation bolts (4 Nos with 3 Nos of nuts and washers in each), single arm bracket for mounting the light fittings, Bakelite sheet with one MCB SP, 6 Amp and 16 sq. mm stud type connector (4 Nos) inside the pole at door opening for cable connection, common templates minimum for 15 poles. Detailed specifications of Galvanized Octagonal poles are given in Annexure-XX of tender document.

Supply and providing rubber mat of size 2.0 x 1.0 meter and 2.5/3.0 mm thick - The price shall cover for supply and provision of 8 rubber matting of size 2.0 x 1.0 meter and 2.5/3.0 mm thick Made of Dielectric "Elastomer" rubber and Synthetic Polymer as per IS: 15652-2006 (latest) of size 2.0 x 1.0 meter and 2.5/3.0 mm thick in HT/LT panel room for electrical insulation above the ground. The rubber mat shall be got approved by site engineer before supply.

Supply of 600 VA UPS as per specification for personal computer - The price shall cover for supply, fixing, testing and commissioning 9 of line interactive UPS with isolation transformer suitable for single phase AC input and single-phase AC output of 600 VA capacity and indicative backup time of 30 minutes. The UPS shall be of reputed make/brand. The batteries shall be of 12 Volt and of suitable rating of Exide/Amar Raja/Hitachi/Yuasa/CSB make.

Supply, installation, testing and commissioning of Air Curtain for industrial application - The price shall cover for supply, installation, testing and commissioning of Air Curtain for industrial applications as per the specifications given in Annexure-XX of tender document.