Rajasthan Rajya Vidyut Prasaran Nigam Limited Tender

Supply of standard size single Bed of Size 1875mm x 900mm x 380mm height made of M.P. Teak wood Grade -I, using 12mm thick commercial ply (National Brand or equivalent) at bottom, 4 supports of minimum Size 65x40 cross wise and 2 supports Longitudinally fixed with side frame of 100mm width and 35mm thickness. End panels of 19 mm thick wooden Block Board and lamination (National Brand or equivalent) and of size not less then 750mm for Head rest Panel (450mm Laminated front top) and 300 mm for Rear Panel dully covered with Mat finished /laminated (Formica or equivalent teak finish shade) with proper edge beading of M.P. teak wood grade -I (6mm thick ). Provision of all four legs as continuous single member (either sides of panels) and of size 100mm x 40mm complete with spirit polish on exposed wooden surface of reputed and approved make work completed in all respect including all freight charges as per direction of Engineer - In -Charge.

Supply of standard size Double Bed of Size 2020mm x 1520mm x 380mm height made of M.P. Teak wood Grade -I, using 12mm thick commercial ply (National Brand or equivalent) at bottom, 4 supports of minimum Size 65x40 cross wise and 2 supports Longitudinally fixed with side frame of 100mm width and 35mm thickness. End panels of 19 mm thick wooden Block Board and lamination (National Brand or equivalent) and of size not less then 750mm for Head rest Panel (450mm Laminated front top) and 300 mm for Rear Panel dully covered with Mat finished /laminated (Formica or equivalent teak finish shade) with proper edge beading of M.P. teak wood grade -I (6mm thick ). Provision of all four legs as continuous single member (either sides of panels) and of size 100mm x 40mm complete with spirit polish on exposed wooden surface of reputed and approved make work completed in all respect including all freight charges as per direction of Engineer-In-Charge.

Supply of Executive high back chair with seat/back made of dimensions 50.0 cm (W) x 45.0 cm (H) (approx.) and overall height of Chair 90.0 cm (approx.) with a seat height of 55.0 cm (approx.) ; Overall width & depth of chair from pedestal 70.0 cm (W) x 70.0 cm (D) (approx.) ; Upholstered with fabric, High resilience polyurethane foam armrests and tubular frame; Center tilt mechanism, 360 degree revolving mechanism, 17 + /- 2 deg tilt on pivot at center, Upright position locking. Tilt tension adjustment Pneumatic height adjustment, Telescopic bellow assemble, Pedestal assembly with twin wheel castors of standard make of reputed and approve make work completed in all respect including all freight charges as per direction of Engineer-In-Charge.