Northern Railway Tender

CH-4A

CH-5

CH-7

CH-8

CH-9

CH-11

CH-12

CH-13

CH-14

Item rate for Centering and shuttering including strutting propping etc and removal of form work for 1 weather shade horizontal fins and chajjas etc use ply / steel plaes/ steel mould including all loading/ unloading, lifting all height, leading, all taxes, charges all L&M, T&P as a complete job. Nothing extra will be paid whatsoever the case may be.

Providing, and applying two coats of cement based epoxy modified anticorrosive coating and 2 bonding agent-Sika top Armatee 110 (or MBT Rheo mix 141 plus concretive ZRI or STP corr- bond) or the equivalent on old/ new steel bars and also on old concrete surface @ 2.40Kg/sqm before applying fresh concrete complete in all respect for all heights as per direction of Engineer- in- charge. (Rate is including for cost of T&P, machinery, required material for all lead lift etc for all heights upto all floors required at site).

Item rate for providing and placing in position micro- concrete which shall be cement based pre- packed single component, chloride free, non shrink, free flow, self compacting , ready to use after mixing water in specified proportion obtained from approved manufacturer such as Sika- Rap micro concrete 2 of Sika or 3 Renderroc RG of FOBROC or equivalent as per specification direction of Engineer - in- charge. ( Payment under this item shall be made only after proper wet curing has been done and surface satisfactorily evaluated by sounding / tapping with blunt metal ,Grade M- 25 as per direction of Engineer- in- charge). Polymer content of 6% by weight of including all handling, loading/ unloading, lifting at all heights, leading, all taxes, charges, all L & M, T & P complete job. Nothing extra will be paid whatsoever the case may be.

Item rate for chipping of unsound/ weak concrete materials from beams, slabs, columns etc. (average thickness 25mm) RCC work with standard power driven percussion type or pneumatic chisel of standard 4 make as per direction of Engineer- in-charge including disposal of unserviceable material to approved municipal dumping ground by mechanical transport items (Demolishing to start top of downloads) including all loading/ unloading, lifting at all heights . leading, all taxes, charges, all L & M, T & P complete job. Nothing extra will be paid whatsoever the case may be.

Item rate for providing and fixing Steel pipe/ M.S pipe scaffolding double type of cap lock as per requirement complete in all respect as per direction of Engineer-in- charge maintaining it in a serviceable condition for the required duration and removing it thereafter the scaffolding system shall be stiffened with 5 bracing, runners, connection with the structure/ building etc. with suitable working platforms at required location with essential safety features for the workmen etc. complete as per direction & approval of Engineer - in- charge. Intermediate platform to be provided for arresting falling debris. Item includes all loading/ unloading, lifting at all heights, leading, all taxes, charges, all L & M, T & P complete job. Nothing extra will be paid whatsoever the case may be. The elevation area of the scaffolding system shall be measured for the payment purpose.

Item rate for providing, mixing and applying bonding coat of Sika Dur of 32 LP or Nitobond EP of 6 FOSROC or equivalent on chipped portion of RCC as per manufacturer's specification and direction of Engineer- in- charge, complete in all respect including all loading/ unloading, lifting all height, leading, all taxes, charges all L&M, T&P as a complete job. Nothing extra will be paid whatsoever the case may be.

Item rate for providing, mixing and applying upto 25mm thick modified polymer, cement mortar 7 including trowlling etc. Sika top 77 of Sika or equivalent in the required portion as per specification and direction of Engineer- in- charge. Cement to be givenby the client, including all loading/ unloading, lifting all height, leading, all taxes, charges all L&M, T&P as a complete job. Nothing extra will be paid whatsoever the case may be. ( Polymer used shall have a minimum solid polymer content of 10% by weight of cement strength of 28 days 20N/mm2). Square

P&F wall hanging WC europian type with concealed cistern with SS button of superior quality (Hindware/ pariware/ CERA make of any colour).) including all lead, lifting at any height , loading unloading.

P&F wall hanging Italian type wash basin with half pedestal including all fittings of make Hindware/ pariware/ CERA make of any colour) including all lead, lifting at any height , loading unloading.

Providing and fixing anodised POWDER COATED aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285, anodised transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15),fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including 12 necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/ panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) For openable/sliding portions and fixing hinges / pivots, PVC/ neoprene gasket required and making provision for fixing of fittings. (Fittings shall be paid for separately). For frame of doors, windows, vantilators and partitions etc.

Providing and fixing anodised POWDER COATED aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS:733 and IS:1285, anodised transparent or dyed to required shade according to IS:1868 (Minimum anodic coating of grade AC 15),fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including 13 necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle. Aluminium snap beading for glazing/ panelling, C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing and panelling to be paid for separately) For openable/sliding portions and fixing hinges / pivots, PVC/ neoprene gasket required and making provision for fixing of fittings. (Fittings shall be paid for separately). For shutters of doors, windows, vantilators , partitions and sliding windows etc.

New Technology Items-Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured out of minimum 0.75 mm thick steel sheet as per design requirements. The steel sheet shall be galvanized (AZ-150gms Aluminium Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per IS: 875-1987, ISO 800-1984 and IS:801- 1975. The wind load shall be as per provisions of IS 875 (part -III). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11.7/ STAAD PRO-V8i/ArchitekV2.5.16/ Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames), Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L-Shaped Angles for better structural stability. The framing section shall be 14 cold form C-type having minimum web depth 89 mm x 39mm flange x 11mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. The slots will be along centre line of webs and shall be spaced minimum 250mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM B633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 & 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIT/IIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above.

Providing and fixing of external wall system on Light gauge steel frame work with . Outer face 15 having 6mm thick heavy duty fiber cement board fixed on 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, category IV type A (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be sealed with silicon based sealant. The board shall be fixed in a staggered pattern.Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm and internal face 12.5mm thick gypsum plaster board fixed on 8mm thick fiber cement board confirming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately).

Providing and fixing internal wall panels on Light gauge steel frame work with 12.5mm thick gypsum plaster board conforming IS 2095:2011 fixed on 8mm thick fiber cement board conforming to IS 14862:2000 of 16 category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60mm to 4 mm thick of 8 to 10 gauge of length varying from 25 to 45 mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.(cost of frame work to be paid for separately)

Providing and fixing in all exterior face panels breathable vapour barrier underneath the cement fiber board as per National Building Code 2009 complete as per direction of Engineer-in-charge.

Providing and fixing wooden flooring of PERGO/ NOVA/ KINDAL/ARMSTRONG make of 8.3mm 18 thick AC-4 grade wooden laminated floor including all taxes charges loading, unloading, leading,lifting all heigths all L&M, T&P complete job as per the full satisfaction of Railway authority. Nothing extra will be paid whatsoever the case may be.

Providing 6mm thick (Average) plaster of paris shriram/ JK or other equivalent make over plastered walls etc. with all labour and material, at all heights as a complete job.

Providing plaster of paris shriram/ JK or other equivalent make cornice of approved design and shape size 75mm to 100mm wide with all labour and material, at all heights as a complete job.

Providing and fixing CP brass bib cock 15mm dia with cap of approved make and quality ((Parko/ Jaguar/ Marc/ Glaxy/ Ess-Ess)) at all height as directed by the Engineer In-charge with all labour and material as a complete job.

Providing and fixing CP Angle Valve15mm dia of approved make and quality (Parko/ Jaguar/ Marc/ Glaxy/ Ess-Ess) at all height as directed by the Engineer-In-charge with all labour and material as a complete job.

Providing frameless fixed partition interal glazing between RCC column/brick column by 12mm thick 23 toughened glass fully tempered of make Saint Gobin/AIS/GSC with all fitting like corner fitting, side connect or of DORMA or equivalent approved make including cartage, stacking, making cutout as per approved drawing and as per the instruction of Engineer-In-charge with all labour and material as a complete job.

Supplying & fixing Sintex or equivalent make water storage tanks single piece cylindrical/ 24 rectangular without any seam weld conforming to IS: 12701-1996 within built up platform on top and horizontal corrugation on sides of the tank and locking arrangements including float valve inlet, outlet and over flow, connection as per the instruction of the Engineer at all heights, including all taxes, leads, lifts, crossing of tracks all labour and material as a complete job.

Providing and fixing 10mm hollow twin box type multi wall blue coloured polycarbonate sheets in plain/curved shape of approved make GE PLASTICS/POLYGAL in roofing/skylight dome with 0.8mm thick walls and 0.5mm thick intermediate rib, having UV protection coating film & infrared solar control coating ( Heat 25 transmission less than 45%) including providing and fixing coloured powder coated aluminum profiles (60mmx32mm trapezoidal) section conforming to IS: 733-1983,Alloy - 606T6 (Hindalco or Jindal) with alcox fixing arrangements including their fixing with existing mild steel structure, including cost of joining, "U" profile, all aluminium profile and fixing accessories. The item includes fixing at all heights, all-lead, lift all taxes, labour and material as a complete job. (The measurement will be taken for the actual finished surface area of the sheeting.

Supply and fixing 110mm dia P V C Nanhi Trap. The item includes all taxes charges m loading,unloading,leading, all heigths all L&M,T&P as a complete job. As per the satisfaction of Engineer in charge. Nothing extra will be paid whatso ever the case may be.

Providing and fixing CP health Flow system (faucet) on wall near any type of WC pan of Parko/ 27 Mark/Hindware make with minimum 1 mtr CP tube& wall horn 15mm dia in approved shape including all fitting all screws, nails, plug etc. all loading,unloading,leading, all heigths all taxes , charges all L&M,T&P as a complete job. As per the satisfaction of Engineer in charge. Nothing extra will be paid whatso ever the case may be.

Providing and fixing 15 mm dia CP brass two way bib cock of make Mark/Hindwarehe/ Jaguar.The rate includes all taxes charges m loading,unloading,leading, all heigths all L&M,T&P as a complete job. As per the satisfaction of Engineer in charge. Nothing extra will be paid whatso ever the case may be.

Providing and fixing 4mm thick looking mirror of approved quality and make (Modiguard) with teak wood beading frame size 35x20mm and 4mm thick commercial ply lining on back side including sprit polishing with all labour and materials as a complete job

Dismantling RCC, CC, brick work, stone work, tiling , hard rock and asphalted Road in cement/Lime etc. (which can be dismantled manually or by mechanical means) and removal/disposal of dismantled material OR 30 any other malba outside Railway land as directed by Engineer-In-charge at all height/depth irrespective of any lead, lift, loading, unloading, handling, re-handling, ascents, descents, crossing of nallah, stream, track, level crossing or any other obstructions with all labour material, tools, plants and machinery etc. as a complete job. Note:-1. All released materials will be the property of contractor. 2. Dumping area shall be arranged by the contractor at his own cost.

Rebate for dismantling of steel work in built up section in angle, flats, tee, channel etc. , steel roof sheets, steel door frames, steel section windows, ventilator, coping rails structural steel etc. without dismembering. all dismantled / released material will be the property of the contractor.

Providing and fixing powder coated aluminium grill of approved shade design and quality ( minimum weight 3kg per sqm) in window/ ventilator of required size and approved pattern including all necessary fitting etc, as a complete job.

Providing and fixing 32mm dia C.P. brass bottle trap of approved make and quality for wash hand basin for all height all labour and materials as a complete job.

Providing and fixing POP cast in situ POP false ceiling laid over chicken mesh of superior quality fixed on GI iron perforated pressed metal sheet grid frame of section size 2"X1.75" c/c interlocking making 34 hanging arrangement from RCC roof with superior quality dash fasterners cutting or making recess for CFL lights and tube lights and any other lighting sysytem including all shapes carving and offset making etc. chicken mesh shal be fixed with screws and washers etc. POP shall be laid over this frame in two stages i.e. first stage for kacha and other stage final stage including all taxes, charges all L&M, loading, unloading, lifting any height any floor complete job. Nothing extra will be paid whatsoever may be in case.

Providing glazed double door between RCC column/ brick wall opening by 12 mm thick toughened 35 glasss fully tempered of Saint Gobain/AIS/GSC make. The cost icludes all fitting likr corner fittings, side connector, bottom patch, top patch, fan light patch, corner lock, floor spring and SS handles of DORMS or equivalent approved make including cartage, stacking, making cutout as per approved drawings as per direction of Engineer- in-charge with all labour and material T&P as a complete job.

Providing and installation of autometic sliding glass door with automatic door operators with two 36 motion sensors, safety sensors, D-seal and all mechanical parts including 12mm thick toughened. The cost inclusive of MS channel of size 125x62x6mm on top and vertical with one year warranty after installation including all loading, unloading, lifting at all heights all taxes charges all labour and material, all T&P as a complete job. Nothing extra will be paid whatsoever may be in case.

Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80 mm thick C.C. paver block of M-30 grade with approved color design and pattern.