Netaji Subhas Institute Of Technology Tender

4 Coffee Table Supplying and placing in position coffee table of following specificaitons. The overall dimension of the table shall be 1200mm Width x 594mm Depth x 411mm Height.All panels shall be made of 18mm Prelaminated Particle Board, with all exposed edges having 2mm thick PVC edge banding. Middle horizontal panel provides storage area. Fournylon bushes are provided at the bottom. Top: It has top surfaces made of glass & PLT panel. 8mm thick toughened glass with UV plate glued on it. This glass is fixed with the side vertical panels. PLT top panel is hinged with sidevertical panels to open upwards. Hardware: Dowels for knockdown assembly with high quality standard hardware like screw,door hinges, bumpers, expanding sockets, nylon bushes etc. The Product shAll be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

5 TV Unit Supplying and placing in position TV Unit of the following specificaitons. Overall dimension of the unit shall be 1200mm width x 398m Depth x 500mm Height. All panels shall be made of 18mm Prelaminated Particle Board, with all exposed edges having 2mm thick PVC edge banding Lipping Thickness: 0.35. The product sahll provide two drawers and two hinge door units in the cabinet. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

6 Recliner Supplying and placing in position Recliner of the following specificaitons. Overall Dimension: 950mm width x 740mm depth x 1050 mm height. Frame materiall shall be rubberwood with moisture content ranging from 12-14%. FOAM: GSM 150kg per seat. The densityos seat foam shall be 24 kg/m3 and the thickness is 70mm. Mechanism: MS Recliner Mechanism. Webbing material shall be nylon with a belt of width 45 mm in back and 50mm in seat. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

7 Shoe Cabinet Supplying and placing in position shoe cabinet of the following specificaitons. Overall dimensions of the cabinet shall be Length: 1200 mm Width:395 mm Height: 490 mm. The Cabinet shall be provided with 3 numbers of hinged door units with a shelf in the centre for creating storage for the shoes. All panels shall be made of 18mm Prelaminated Particle Board, with all exposed edges having 2mm thick PVC edge banding Lipping Thickness: 0.35. Panel shall have melamine lamination on particle board. The top shall be cushioned for seating provision in PVC finish. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

8 Executive Table with Side Unit Supplying and placing in position Executive table with side unit of the following specificaitons. The Main table shall be of size 1800 Width mm x 900 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in built key board pull out tray for keeping keyboard of computer. The front modesty panel of the table shall be made up of MDF board of size 1640 mm x 600 mm x 16mm which shall also be duly finished with Veener and PU coating. For personal storage one mobile pedestal (3 drawer unit) shall be provided of size 510 mm Width x 635 mm Height and 445 mm Depth. The storage pedestal shall also be made up of MDF duly finished with veener & final coating of PU. The Side shall be of size 1200mm Width x 445mm Depth x 660 mm Height. The side unit shall be made up of MDF board duly finshed with Veneer and final finish by PU Coating. The design of the side unit shall be such that it can be placed on either side of the main table. The side unit shall contain open space for keeping cpu in extreme right side, one closed storage shutter at extreme left end & open space in the middle with one shelf for keeping files. The thickness of the top of the side unit shall be 25mm. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

9 Executive High Back Chair ( with Headrest) Supplying and placing in position Executive High back chair with headrest of the following specificaitons. The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment shall beprovided in aluminium structure of armrest which is connected to aluminium back spine and is operated with button. Armtop is made up of PU molded over plastic inner. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. The powder coated tubular frame shall be cantilever type and made of dia.2.54+/-0.03 cm x 0.2+/-0.016 cm thick MSERW tube.Overall dimensions of Chair shall be, Width of Chair - 70.5cm, Depth of Chair - 70.5 cm as measured from pedestal below. Height from ground - 99.5cm. Seat height -48.5cm. Dimensions tolerance / variations shall be within +/- 1 cm. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

10 Visitor Chairs Supplying and placing in position Visitor Chair of the following specificaitons. The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is operated with button. Armtop is made up of PU molded over plastic inner. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. Overall dimensions of Chair shall be, Width of Chair - 70.5cm, Depth of Chair - 70.5 cm as measured from pedestal below. Height from ground - 99.0cm. Seat height -49.0cm. Dimensions tolerance / variations shall be within +/- 1 cm. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

11 Vertical Filing Cabinet Supplying and placing in positionVertical Filing Cabinet of the following specificaitons. Vertical Filing Cabinets whcih use less floor space. Size of 4 Drawer VFC shall be 1320mm(H) X 470mm(W) X 620mm(D). All the components shall be made of CRCA . It should have 1 Point Locking Mechanism and a Rigid Knock Down Construction. The Top, Side & Drawer Front thickness should be 0.7mm. The Frames, Drawer-inside cover and Side Back Side thickness should be 0.6mm. The Back, Bottom and Drawer thickness should be 0.5mm. Easy to grip Full length Recess Handle shall be integrated into Metal Drawer for easy pull out convenience. There shall be a Snap on type plastic label holder on Drawer Fronts. In addition, 28 files (Foolscap) from front to back of thickness 20mm per drawer can be hanged in VFC. The Centralized locking System shall be provided along with Shooting Bolt Mechanism and 10 Lever Cam Lock. The VFC should have anti-tipping arrangement which ensures that when one drawer is opened for use, it does not allow other drawers to be opened. The High Quality Precision Ball Slide shall be provided with Drawer Load capacity of max 40 kg and UDL for 75,000 cycles (BS). Plain Triangular plate pop should be riveted at the bottom corners for rigidity. Optional Accessories like Drawer Partition and Cradle for hanging A4 file folders front to back should also be available. The finishing shall include Epoxy powder coated to the thickness of 50 microns (+/- 10). The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

12 Dining Table 8 Seater Supplying and placing in position 8 Seater Dining Table of the following specificaitons. Overall dimension of the table shalle be 2100mm width x 900mm depth x 755mm height.The top shall be made up of 10mm temperred glass. Under structure-Bottom leg frame shall be made out of first quality rubber wood without knots & defects on all faces. Back rest is connected to bottom leg frame & made from plywood (12mm thick). The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

13 Dining Chairs Supplying and placing in position Dining Chairs of the following specificaitons. Overall dimension of the chair shall be 560mm width x 460mm deoth x 905mm height. Seating height of the chair shall be 470mm. The material of the seat and back shall be 15mm Back Iron Board .Under structure-Bottom leg frame is made out of first quality rubber wood without knots & defects on all faces. Back rest is connected to bottom leg frame & made from plywood (12mm thick). Seat cushion assembly is made from plywood (12mm thick) & PU foam. Finish Bottom leg frame & back rest plywood has Wallnut shade with P.U. coat of Hardness 4H on all faces of frame. Fabric from Sarom (code – MF 460) should be used for seat cushion assembly. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

14 Display Unit Supplying and placing in position Display Unit of the following specificaitons. Overall Dimension of the unit shall be Width 1400mmx Depth 400mm x Height 754mm. Material : 15 mm particle board melamine impregnated paper lamination. The unit shall provide 3 drawers units and 3 display cabinets having hinged door shutters with glass fascia. Glass shall 6 mm tampered. Hinges : Metal in chrome plated. Handles : Metal in powder coated Load bearing capacity of each shelf : 35 Kg. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

15 Premium Executive Table with Side Unit Supplying and placing in position VC table with side unit of the following specificaitons. The Main table shall be of size 3600 Width mm x 1080 mm Depth x 750 mm height. Top surface of the table shall made up of MDF (Medium density fibre ) board duly finished with Veneer and final coating of PU. The Main desk should contain in Smart Case - space slides effortlessly in style.The mobile Pedestal shall be of size 480 Width mm x 640 Depth mm x 600 Height mm. Mobile pedestal shall be coated of MDF (medium density fiber ) with veneer coating and PU coating.The ERU Top shall be of MDF (medium density fiber) board duly finished with veneer and final PU coating. Size of ERU top 1900 Width mm x 480 Depth mm x 550(not from ground with castors).The main desk is provided eith the wire management system also there is perfect storage side unit . The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

16 Back Unit Supplying and placing in position Back Unit for VC table of the following specificaitons. The Size of the Back unit shall be 1000 mm width x 480 mm Depth x 2035 mm height. The back unit shall be made up of MDF board duly finished with veneer & final finish by PU coating. The mobile unit can be bought in multiples.PU coating hardness 1.5H. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

17 High Back Chair- Leather Supplying and placing in position High Back Chair of the following specificaitons. The cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather. seat size : 47.6 cm. (w) x 49.2 cm. (d).back size : 47.5 cm. (w) x 77 cm. (d).armrests: the armrest top should be moulded from polyurethane(pu), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 steps. active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features:360° revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.tilt tension adjustment can be operated in seating position.5-position tilt limiter giving option of variable tilt angle to the chair.seat/back tilting ratio of 1: 2.the mechanism housing should be made up of hpdc aluminium black powder coated.seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0±0.5 cm. 5 adjustable back support: back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.pneumatic ht. adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.pedestal assembly the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.).twin wheel castors:the twin wheel castors should be injection moulded in black polypropylene The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only. .

18 Mid Back Chair- Leather Supplying and placing in position Visitor Chair of the following specificaitons. The cushioned seat should be made of injection molded plastic outer & inner. plastic inner should be upholstered with pure leather and moulded high resilience (hr) polyurethane foam of density 45±2 kg/m3,and hardness load 16 ± 2 kgf for 25% compression.the cushioned back should be made of pu foam with insitu molded ms e.r.w round tube of size 1.9±0.03cm x 0.16 ±0.0128cm. it upholstered with pure leather. seat size : 47.6 cm. (w) x 49.2 cm. (d).back size : 47.5 cm. (w) x 77 cm. (d).armrests: the armrest top should be moulded from polyurethane(pu), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk m.s e.r.w tube having chrome plated finish.the armrest height adjustable up to 6.5±0.5cm in 5 steps. active bio-synchro mechanism: the adjustable tilting mechanism should be designed with the following features:360° revolving type. front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort.tilt tension adjustment can be operated in seating position.5-position tilt limiter giving option of variable tilt angle to the chair.seat/back tilting ratio of 1: 2.the mechanism housing should be made up of hpdc aluminium black powder coated.seat depth adjustment: seat depth adjustment should be integrated in the seat through a sliding mechanism. seat depth adjustment range should be of 6.0±0.5 cm. 5 adjustable back support: back frame should be connected to the up/dn mechanism housed in plastic t spine. it can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need.pneumatic ht. adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm.pedestal assembly the pedestal should be high pressure die cast polished aluminium and fitted with 5 nos. twin wheel castors. the pedestal should be 65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. with castors.).twin wheel castors:the twin wheel castors should be injection moulded in black polypropylene. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

19 3 SEATER SOFA IN PURE LEATHER Supplying and placing in position 3 Seater Sofa in pure leather of the following specificaitons. Overall dimension of the sofa shall be - Width 1820mm x Depth 920mm x Height 890mm. The Seating height of the sofa shall be 470mm. The frame shall be made up of plywood of Standard- IS 303 Commercial Plywood having Thickness 12mm.Webbing material shall be nylon with a belt of width 45 mm in back and 50mm in seat. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

20 1 SEATER SOFA IN PURE LEATHER Supplying and placing in position 1 Seater Sofa in pure leather of the following specificaitons. Overall dimension of the sofa shall be - Width 920mm x Depth 920mm x Height 890mm. The Seating height of the sofa shall be 470mm. The frame shall be made up of plywood of Standard- IS 303 Commercial Plywood having Thickness 12mm.Webbing material shall be nylon with a belt of width 45 mm in back and 50mm in seat. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

21 Coffee Table Supplying and placing in position coffee table of following specificaitons. The overall dimension of the table shall be 1200mm Width x 594mm Depth x 411mm Height.All panels shall be made of 18mm Prelaminated Particle Board, with all exposed edges having 2mm thick PVC edge banding. Middle horizontal panel provides storage area. Fournylon bushes are provided at the bottom. Top: It has top surfaces made of glass & PLT panel. 8mm thick toughened glass with UV plate glued on it. This glass is fixed with the side vertical panels. PLT top panel is hinged with sidevertical panels to open upwards. Hardware: Dowels for knockdown assembly with high quality standard hardware like screw,door hinges, bumpers, expanding sockets, nylon bushes etc. The Product shAll be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

22 Corner Table Supplying and placing in position corner table of Dimensions 600 x 600 x 450. 8 mm. The top shall be made up of tempered glass of 8mm thickness. A 6 mm thick tempered glass shall be provided below the top for storage. Understructure shall be Silver powder coated metal with Glass attached to the understructure via UV disc. Load bearing capacity : 20Kg. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.

23 8 Seater Conference Table Supplying and placing in position Conference Table of the following specificaitons. .Overall size shall be 2400 Width mm x 1200 Depth mm x 750 Height mm . Top shall be 32 mm thick Base material shall be 18 + 12 mm MDF board. There shall be natural veneer 0.5 mm on top surface plus 0.6 mm balancing laminate on bottom surface Chamfer edges - PU Matt painted and veneer portion of worksurface is finished in PU Matt paint . The Veil and cross member shall be 18 mm thick base material shall be 16 mm plain particle board plus post - laminated work -surface with 0.6 mm laminate on eithe side . 2 mm thick and 0.8 mm thick PVC edge banding of matching colour on outer edges of Veil 0.8 mm thick PVC edge banding of matching colour on outer edges of cross member . The legs shall be made from 1.6 mm Matt silver Anodized Aluminium extrusion . Legs assembeled together with a plastic glide holder at bottom and 5 mm thick MS powder coated sheet at top . The plastic glide holder is having provision for wire entry and glide fixing . The wire carrying is facilited through the hollow space between two leg extrusions and the wires are concealed between removable rigid PVC extrusion in the leg . Access Flap and Switch Mounting Tray shall be made of matt silver anodized aluminium extrusion and plastic moulded components . Powder coated switch mounting tray made from 0.8 mm and 1.2 mm MS sheet .Switches to be mounted on tray as per requirement and Provision for mounting a module anchor roma swtch plate on switch mounting tray. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only

24 Conference Chairs Supplying and placing in position Conference Chairs of the following specificaitons.The cushioned seat assembly shall consists of seat outer(material-30% glass fiber nylon) and upholstered seat inner(material-polypropylene) with moulded polyurethane foam and polyster fabric. the net back should made up of back outer(material-glass fiber filled nylon) and back inner(material-PP) and upholstered using polyester mesh fabric with high tenacity yarn. Size of back shall be (W)-46.5cm, (H)-60.0cm & size of seat shall be (W)-51.0cm x (D)-49.0cm. The supprot spine should made up of high pressure die cast polished aluminium. Armrest is having two adjustment, Height(6+/-0.5cm) and depth(6+/-0.5cm). Height adjustment shall be provided in aluminium structure of armrest which is connected to aluminium back spine and is operated with button. Armtop is made up of PU molded over plastic inner. The mechanism of chair shall have following features:360 degree revolving type, Seat/Back tilt ratio of 1:2, Active Bio-Synchro mechanism, 5 position tilt limiter giving option of variable tilt angle to the chair. Front-Pivot for tilt with feet resting on ground and continious lumber support should ensure more comfort. The mechanism housing should made up of HPDC Aluminium and black powder coated. The chair shall be provided with pneumatic height adjustment which shall have stroke of 10.0 +/- 0.3 cm. The pedestal shall be made of die-cast polished aluminium. it shall be fitted with 5 nos twin wheel castor. The size of the pedestal shall be 65.0 +/- 0.5 cm pitch-centre-dia (75.0 +/- 1.0 cm with castors). The twin wheel castors shall be injection moulded in black polypropylene. The lumbar support assembly should consists of lumber spine(material-glass fiber filled nylon) which is fixed to Aluminium back spine. Overall dimensions of Chair shall be, Width of Chair - 75.0cm, Depth of Chair - 75.0 cm as measured from pedestal below. Height from ground - min 95.5 to max 105.5 cm. Seat height - min 45.5cm to max 55.5cm. Dimensions tolerance / variations shall be within +/- 1 cm. The Product shall be from one of the approved make of Godrej, Hermanmiller, Steelcase, Dellform or Vitra only.