National Highways Authority Of India Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
National Highways Authority Of India - NHAI Tender
Civil And Construction
Building Construction
Eprocure
Opening Date31 Mar 2022
Closing Date4 May 2022
Tender Amount₹ 2,99,51,800
Costs
EMD
₹ 5,99,036Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_NHAI_111739_1Bid Award Id
ViewTender No
NHAI/EandBM/New HQ/ARC-CIVIL/ 2022Tender Authority
National Highways Authority Of India ViewPurchaser Address
-Website
http://https://nhai.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil:
-
-
-
All kinds of soil
-
-
-
All types of Pipes, cables etc. upto 300 mm dia
100
-
-
Anti-termite treatment for insecticides using Aqua base spray for pest (for bugs, cockroaches, silverfish, spider, termites, mosquitoes) to walls and ceiling etc. with chemical emulsion by admixing chloropyrofos emulsifiable concentrates (1% concentration) with water by weight including spraying the emulsified chemical @ 0.5 litres per sq.m. by a hand operated pressure pump on wall surfaces, ceiling, electrical fixture,electrical lines including drilling holes inplaces where source of termite is detected squirting chemical solution into the holes and sealing the holes with cement grout. (Rate is per sq.m. of the floor area while actual work will be all walls ceiling, rack, partition and furniture).
1000
-
-
Sub-Head: Concrete Work
-
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size)
5
-
-
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm
nominal size)
5
-
-
1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size)
10
-
-
Centering and shuttering including strutting, propping etc. and removal of form work for :
-
-
-
Columns, piers, abutments, pillars, posts and struts
200
-
-
Shelves (Cast in situ)
100
-
-
Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.
100
-
-
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil.
50
-
-
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size
10
-
-
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more
1500
-
-
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
20
-
-
Sub-Head: Masonary/Brick Work
-
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:6 (1 cement : 6 coarse sand)
20
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
Cement mortar 1:4 (1 cement :4 coarse sand)
50
-
-
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
10
-
-
Sub-Head: Finishing Work
-
-
-
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
-
-
-
With cement mortar 1:4 (1 cement : 4 fine sand)
200
-
-
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
100
-
-
12 mm cement plaster of mix :
-
-
-
1:4 (1 cement: 4 fine sand)
50
-
-
1:6 (1 cement: 6 fine sand)
50
-
-
Neat cement punning.
50
-
-
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.
7000
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Note: Measurement Will be 30% of plastic emulsion paint for Old Work
1500
-
-
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work
5000
-
-
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :Old work (One or more coats) over and including water thinnable priming coat with cement primer
2000
-
-
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work
500
-
-
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
On concrete work
100
-
-
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
Note: New Work
200
-
-
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :
Two or more coats on new work
200
-
-
Finishing walls with water proofing cement paint of required shade :
-
-
-
Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 litrs/10 sqm complete including cost of Priming coat.
100
-
-
New work (Two or more coats applied @ 3.84 kg/10 sqm)
100
-
-
French spirit polishing :One or more coats on old work
500
-
-
Melamine polishing on wood work (one or more coat).
800
-
-
French spirit polishing :Two or more coats on new works including a coat of wood filler
300
-
-
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications
50
-
-
Sub-Head: Stone, Tiles and Flooring Work
-
-
-
Providing and fixing dry cladding upto 10 metre heights with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and size upto 1mx1m, fixed to structural steel frame work and/ or with the help of cramps, pins etc. and sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins etc. shall be paid for separately).
-
-
-
30mm thick gang saw cut stone
-
-
-
Red sand stone
100
-
-
White sand stone
100
-
-
Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part there of.
-
-
-
10.00 m to 13.00m
10
-
-
13.00 m to 16.00m
10
-
-
16.00 m to 19.00m
10
-
-
19.00 m to 22.00m
10
-
-
22.00 m to 25.00m
10
-
-
25.00 m to 28.00m
10
-
-
28.00 m to 31.00m
10
-
-
31.00 m to 34.00m
10
-
-
34.00 m to 37.00m
10
-
-
Providing and fixing adjustable stainless steel cramps of approved quality, required shape and size, adjustable with stainless steel nuts, bolts and washer (total weight not less than 260 gms), for dry stone cladding fixed on frame work at suitable location, including making necessary recesses in stone slab, drilling required holes etc complete as per direction of the Engineer-incharge.
500
-
-
Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.
-
-
-
Granite Stone of approved shade
10
-
-
Providing and fixing stone work in Wave Pattern/ Geometric Design Pattern/ Abstract form,Linear Pattern straight pattern as per Design/ Drawing. Machine cut, mirror/ diamond , Marble Combination stone work for wall lining (veneer work) including dado, skirting, risers of steps etc, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.
-
-
-
18 mm thick Italian Marble stone slab, Perlato, Bottachino Classico,Rosso verona, Fire Red or Dark Emperadore etc. Stone to be approved by Architect/ Engineer/Owner
10
-
-
SATVARIO Original stone 18 mm in combination with Black Markino italian marble stone. Stone to be approved by Architect/ Engineer/Owner
10
-
-
18 mm thick Granite Stone slab of any colour and shade as approved by Architect/ Engineer/Owner
10
-
-
Stone work in Wave Pattern/ Geometric Design Pattern/ Abstract Pattern, Linear Pattern Straigh Pattern as per Design/ Drawing. Machine cut, mirror/ diamond polish, Marble Combination stone work in Flooring, skirting and steps etc, stones of different finished surface texture, laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with white cement slurry @ 4.4 kg/sqm, including pointing with white cement slurry admixed with pigment to match the marble shade, including rubbing, curing and polishing etc. all complete as specified and as directed by the Architect/ Engineer-in-Charge.
-
-
-
18 mm thick Italian Marble stone slab, Perlato, Bottachino Classico,Rosso verona, Fire Red or Dark Emperadore etc. Stone to be approved by Architect/ Engineer/Owner
10
-
-
SATVARIO Original stone 18 mm in combination with Black Markino italian marble stone. Stone to be approved by Architect/ Engineer/Owner
10
-
-
Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.. Stone to be approved by Architect/ Engineer/Owner
10
-
-
Providing and laying at site 12mm thick wooden laminated floor (AC'5) having an inbuilt 2mm compact sound bloc™ backing-class of use 32/23, wear resistance, impact resistance-IC 2, (as per EN 13329), Top surface having a MLC (Multi-Layer Composite) highly developed laminate, top surface treated with (Aluminium oxide) titan X™ on top of high density fiberboard substrate (density 910 kg/cum) specially developed core: having patented click system perfect fold™ joints to secure long lasting joint. The planks shall be placed on an under lay of 0.2mm thick alkali resistant polyethylene sheet. All as per manufacturer specification.
100
-
-
Providing and fixing at site 10mm to 12mm thick 100mm high laminated wooden skirting/trim all complete as engineer in charge.
50
-
-
Providing and fixing Carpet flooring using Carpet Tile of approved make, shade and pattern and of the following specification: High Cut – Low Loop Carpet tile, Premium Solution Dyed Tri-Lobal Nylon with Anti Stain Treatment, 1/10 gauge, Pile height should be 7.5mm Cut and 4.0mm Loop, total thickness 9.4mm, Tile size should be 609mm x 609mm, Secondary Back Commercial 100% Re-cyclable Duraback. Wear Warranty– product is warranted not to lose more than 10% pile fibre by weight in normal commercial use, 10 Year Warranty ASTM D2053-99. Grade 4 – Little or no change in color, Permanent Lifetime Protection – less than 3.5kv, Lifetime Stain Release System, ASTM E-648 Radiant Panel Class 1, All yarns used are Solution dyed to minimize use of water and exclude any effluent production, ISO 14001 and ISO 9001, CRI Green Label Plus Certified for Indoor Air Quality.
100
-
-
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : (The cost of protecting stone work with polythin and a layer of POP or by any other mean as required to be included in the quoted price of this item)
-
-
-
25 mm Thick
50
-
-
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. (The cost of protecting stone work with polythin and a layer of POP or by any other mean as required to be included in the quoted price of this item)
50
-
-
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.
200
-
-
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of tiles 1000X1000 mm
100
-
-
Providing and laying of 6mm thick PVC Vinyl flooring with foam backing, vinyl floor covering of size 1830 mm width x 13 metres length of weight 4400 g/m2 with wear layer thickness of 1 mm. Wear layer should be treated with Protocol (UV cured Polyurethane surface treatment) which facilitates ease of maintenance and eliminates the use of acrylic emulsions. Residual indentation should be less than 0.25mm & should conform to EN ISO 24343-1(EN 433). The product should have antibacterial properties. The product should also fulfill dimensional stability(EN ISO 23999(EN 434) & effect of furniture leg(EN 424). It should also be suitable for underfloor heating. The product should have excellent sound absorbtion of 24 db and excellent shock absorbent behaviour. The laid flooring shall confirm the fire rating Cfl-S1 class as per EN 13501-1.
100
-
-
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
Glazed Vitrified tiles Matt/Antiskid finish
100
-
-
Fixing glazed/ Ceramic/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness
100
-
-
Removing and refixing existing sand stone cladding or Granite/ marble wall clading laid in cement mortar 1:4 (1 cement : 4 coarse sand), including necessary repairs and cement pointing with same mortar complete, including disposal of rubbish to dumping ground, all complete as per direction of Engineer-in-Charge.
-
-
-
10 to 50 mm thick
200
-
-
Sub-Head: Structural Steel Work
-
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent .
100
-
-
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including applying two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent .
100
-
-
Supplying, fabricating and fixing M.S.Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including, cutting, hoisting, fixing in position and applying two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent , including welding and bolted with special shaped washers etc. complete in all respects inclusive of cost of all labour, materials, tools, tackles etc. as per specifications and direction of Engineer-in-charge.
Hot finished Seamless Type Tubes
100
-
-
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying two coats of epoxy paint "EPILUX 155 High Build Enamel over a coat of EPILUX 610 Primer of M/s Berger or any other approved equivalent .
50
-
-
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately)
200
-
-
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
(ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
100
-
-
Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.
100
-
-
Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design : In 75x75 mm deep chase
100
-
-
Sub-Head: Water Supply Work
-
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.
Internal work - Exposed on wall
-
-
-
15 mm nominal dia Pipes
50
-
-
20 mm nominal dia Pipes
100
-
-
25 mm nominal dia Pipes
25
-
-
32 mm nominal dia Pipes
25
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.
Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal dia Pipes
50
-
-
20 mm nominal dia Pipes
100
-
-
25 mm nominal dia Pipes
25
-
-
32 mm nominal dia Pipes
25
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.
External work
-
-
-
32 mm nominal dia Pipes
50
-
-
40 mm nominal dia Pipes
50
-
-
50 mm nominal dia Pipes
50
-
-
80 mm nominal dia Pipes
50
-
-
Providing and fixing G.I. Union/ CPVC Union in G.I. pipe/ CPVC pipe including cutting and threading the pipe and making long screws etc. complete
-
-
-
32 mm nominal bore
10
-
-
40 mm nominal bore
10
-
-
50 mm nominal bore
10
-
-
80 mm nominal bore
10
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc.
-
-
-
20 mm dia nominal bore
10
-
-
32 mm dia nominal bore
10
-
-
50 mm dia nominal bore
10
-
-
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length-15/20 mm nominal bore
50
-
-
60 cm length-15/20 mm nominal bore
50
-
-
100 cm length-15/20 mm nominal bore
20
-
-
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
15 mm nominal bore
20
-
-
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15mm nominal bore
20
-
-
Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete:
-
-
-
50 mm dia
20
-
-
Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc.
-
-
-
80 mm dia nominal bore
5
-
-
Providing and fixing C.I. dirt box strainer for bulk type water meter with nuts, bolts, rubber insertions etc. complete conforming to IS : 2373 :
-
-
-
80 mm dia
5
-
-
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
150 mm diameter
10
-
-
Providing and fixing ball valve (brass) of approved quality, High or low pressure, complete :
-
-
-
20 mm nominal bore
20
-
-
32 mm nominal dia Pipes
5
-
-
50 mm nominal dia Pipes
5
-
-
80 mm nominal dia Pipes
5
-
-
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)
-
-
-
15 mm nominal bore
5
-
-
25 mm nominal bore
5
-
-
32 mm nominal bore.
5
-
-
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
15 mm nominal bore
10
-
-
Providing & fixing chrome plated brass battery based infrared sensor operated pillar cock, having foam flow technology.
-
-
-
15 mm nominal bore
20
-
-
Sub-Head: Sanitary Work
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
-
-
Providing and fixing white vitreous water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and makinggood the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
5
-
-
Providing and fixing P.V.C. low level flushing cistern with manually controlled device conforming to IS : 7231, with all fittings and fixtures complete.
-
-
-
10 litre capacity - White
7
-
-
Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.
7
-
-
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Flexible pipe-32 mm dia
50
-
-
Flexible pipe-40 mm dia
50
-
-
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing
10
-
-
Providing and fixing soil, waste and vent pipes :
-
-
-
100 mm dia-Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989
20
-
-
Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. :
-
-
-
For 100 mm dia pipe
5
-
-
Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100 mm dia-Sand cast iron S&S as per IS - 3989
5
-
-
Providing and fixing plain bend of required degree.
-
-
-
100 mm dia-Sand cast iron S&S as per IS : 3989
5
-
-
Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete :
-
-
-
100x100x100x100 mm-Sand cast iron S&S as per IS - 3989
5
-
-
Providing and fixing single equal plain junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete.
-
-
-
100x100x100 mm-Sand cast iron S&S as per IS - 3989
5
-
-
Providing and fixing terminal guard :
-
-
-
100 mm-Sand cast iron S&S as per IS - 3989
5
-
-
Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of
diameter :
-
-
-
100 mm
5
-
-
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
100 mm inlet and 100 mm outlet-Sand cast iron S&S as per IS: 3989
5
-
-
Providing and fixing white vitreous china flat back urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
5
-
-
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
5
-
-
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long (Concealed Type) to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.
20
-
-
Sub-Head: Drainage Works
-
-
-
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
100 mm diameter
50
-
-
150 mm diameter
50
-
-
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design :
-
-
-
100 mm diameter S.W. pipe
50
-
-
150 mm diameter S.W. pipe
50
-
-
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
100x100 mm size P type
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
Sub-Head: Rainwater Work & Fittings
-
-
-
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
50
-
-
160 mm diameter
50
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.
Coupler
-
-
-
110 mm
20
-
-
160 mm
20
-
-
Single tee with door
-
-
-
110x110x110 mm
20
-
-
160x160x160 mm
20
-
-
Bend 87.5°
-
-
-
110 mm bend
20
-
-
160 mm bend
20
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
100
-
-
160 mm
100
-
-
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
20
-
-
Sub-Head: Repairs to Buildings
-
-
-
Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.
100
-
-
Renewing glass panes,with putty and nails or wooden fillets wherever necessary all complete as per direction of Engineer In-Charge:
-
-
-
Float glass panes of nominal thickness 5 mm (weight not less than 12.5kg/sqm)
10
-
-
Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like, Hire charges of Pumpset of capacity 4000 litres/hour.
120
-
-
Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete.
10
-
-
Providing and fixing casement window fasteners or peg stays to windows/ ventilators with necessary welding and machine screws etc. complete.
50
-
-
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm
1000
-
-
Dismantling W.C. of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.
10
-
-
Dismantling 15 to 40 mm dia GI/PPR/CPVC pipe (Concealed or exposed on wall) including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge.
200
-
-
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
50
-
-
Filling the gap in between aluminium/ stone/ wood frame and adjacent RCC/ Brick/ Stone/ wood/ Ceramic/ Gypsum work by providing weather/structural non sag elastomeric PU sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete, complying to ASTM C920, DIN 18540-F & ISO 11600
-
-
-
Upto 5 mm depth and 5 mm width
100
-
-
Taking out existing CC interlocking paver blocks, including removal of rubbish etc., disposal of unserviceable material to the dumping ground, for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge.
100
-
-
Laying old cement cocrete interlocking paver blocks of any design/ shape laid in required line, level, curvature, colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
100
-
-
Sub-Head: Wood & Aluminum Work
-
-
-
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length
-
-
-
Second class teak wood
5
-
-
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
20
-
-
Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I)
-
-
-
On one side only
40
-
-
Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).
20
-
-
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :
-
-
-
250X10mm
10
-
-
150X10mm
10
-
-
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.
100
-
-
Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
10
-
-
Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete.
10
-
-
Providing and fixing aluminium sliding door bolts, ISI marked anodised anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
300x16 mm
10
-
-
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
125 mm
10
-
-
Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.
-
-
-
Second class teak wood, 30 mm thick
10
-
-
Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :
-
-
-
2nd class teak wood, 50 x 20 mm
20
-
-
Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading
20
-
-
Providing M.S. Piano hinges ISI marked IS : 3818 finished with nickel plating and fixing with necessary screws etc., complete. 35mm/50mm as per direction of Engineer Incharge
20
-
-
Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :
-
-
-
150x60x2.50 mm
20
-
-
100x60x2.50 mm
20
-
-
75x50x2.50 mm
20
-
-
Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :
-
-
-
150x60x2.50 mm
20
-
-
100x60x2.50 mm
20
-
-
75x50x2.50 mm
20
-
-
Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws.
50
-
-
Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete.
Size 50 mm
20
-
-
Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete.
20
-
-
Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:
-
-
-
125x75x4 mm
20
-
-
75x63x4 mm
20
-
-
Providing and fixing 12 mm thick toughened glass of approved brand and manufacture, including providing and fixing top & bottom U-type fixing arrangement and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge
50
-
-
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).
30
-
-
Providing and fixing pull Handle TGDI-H 450 back to back with 350mm CTC, adjustable fixing for glass, wood and metal doors in satin stainless steel. The pull handles should have supporting washer with raised bevelling on the outer surface. Length =450mm, 25mm dia, -SS304 of Dorma or equivalent.
10
-
-
Providing and fixing Corner patch lock with a euro profile cylinder and strike plate of SAP Code 9117697 product code 3108 of Dorma or equivalent.
10
-
-
Providing and fixing floor stopper half dome with 50mm dia with fixing accessories, in satin stainless steel of SAP Code 20670099 product code US10 of Dorma or equivalent.
10
-
-
Providing and fixing rubber door buffer
10
-
-
Providing and fixing overhead cam action door closer with adjustable closing force EN2-4.all as per specifications ozone model no. NSK-CA-6800 or equivalent.
10
-
-
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :
25 mm dia (heavy type)
100
-
-
Providing and fixing Metal Solid Curtain Rod Bracket Finials
50
-
-
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 /450 mm long with screws etc. complete as per directions of Engineer- in-charge.
50
-
-
Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge.
50
-
-
Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.
-
-
-
1.0 mm thick
100
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.
-
-
-
For fixed portion
Powder coated aluminium (minimum thickness of powder coating 50 micron)
500
-
-
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
200
-
-
Providing and fixing glazing in aluminium/ Wooden door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Including Cost of aluminium/ Wooden snap beading):
-
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
50
-
-
Sub-Head: False Ceiling Repair
-
-
-
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the rate of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.
-
-
-
wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm or both sides of joint and two coats of primer suitable for board, all as per manufacture's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- Part I.
50
-
-
12.5 mm thick tapered edge gypsum moisture resistant board.
50
-
-
Providing and fixing Gl Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing 'C' wall angle of size 20x30x20 mm made of 0.5 mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm center to centre, suspending the main C carrier of size 10x38x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1000 mm c/c. Inverted triangle shaped Spring Tee having height of 24 mm and width of 34 mm made of Gl steel 0.45 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive), fixing with clip in tiles into spring T with :
-
-
-
GI Metal Ceiling Clip in plain Beveled edge global white color tiles of size 600x600 and 0.5 mm thick with 25 mm height, made of G I sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and electrostatically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.
50
-
-
Sub-Head: Roofing & Shading Work
-
-
-
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
50
-
-
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.
-
-
-
2 mm thick flat/ 2 mm thick corrugated (2.5" or 4.2" or 6") or step-down (2" or 3" or 6" ) as specified
50
-
-
Sub-Head: Dismantling and Demolishing Work
-
-
-
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead
10
-
-
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
500
-
-
Dismantling tile work in floors and Walls laid in cement mortar including stacking material within 50 metres lead.
-
-
-
For thickness of tiles 10 mm to 25 mm
400
-
-
Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :
-
-
-
Thickness above 10 mm up to 25 mm
400
-
-
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge.
400
-
-
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
10
-
-
Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
20
-
-
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :
-
-
-
100 to 150 mm dia pipe
20
-
-
Sub-Head: Scaffolding
-
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
200
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-incharge.
Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works.
200
-
-
Sub-Head: Disposal of Malba
-
-
-
Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, including all lifts involved.
100
-
-
Sub-Head: Electrical Work
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell
point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
50
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.
-
-
-
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
100
-
-
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
100
-
-
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20mm
200
-
-
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A Switch
50
-
-
15/16 A Switch
50
-
-
3 pin 5/6 A Socket Outlet
50
-
-
6 pin 15/16 A Socket Outlet
50
-
-
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75mmX75mm)
50
-
-
8 Module (125mmX125mm)
50
-
-
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
20
-
-
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
2 run of cable
100
-
-
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal
spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
100 A, 16 KA,TPMCCB
2
-
-
200 A, 16 KA,TPMCCB
2
-
-
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
30
-
-
Single pole and neutral
10
-
-
Triple pole and neutral
5
-
-
Sub-Head: Labour Charges
-
-
-
Extra for Providing Skilled and Unskilled Manpower
-
-
-
Skilled manpower (Mason, Plumber, Carpenter, Fitter etc.)
60
-
-
Un-Skilled manpower (Coolie, Beldar, Helper, Labour etc.)
120
-
-
Sub-Head: Providing and Fixing of Misscellaneous items/ Work
-
-
-
Multi purpose lock round of Godrej make only of size 50 x 40 x 50mm or as per requirement
500
-
-
Multi purpose lock square of Godrej make only of size 50 x 40 x 50mm or as per requirement
500
-
-
Pad Lock Brass/ Stainless Steel of Godrej make only of size 50/40mm or as per requirement
300
-
-
Three Drawers Lock of Godrej & Hettich make only of size 580mm or as per requirement
150
-
-
Providing and fixing Kimberly-Clark Aquarius Multi Fold Paper Towel Dispenser 70220 - M Fold Paper Towel Dispenser - 1 X White Paper Towel Dispenser (23.2 cm x 28 cm x 11.6 cm) of standard shape with bracket of the same materials with snap fittings of approved quality and colour
50
-
-
Providing and fixing Kimberly Clark Bath Tissue Jumbo Roll dispenser 70260 (Case size: 286 x152 x299 mm & Dimensions: 28.5 x 27.8 x 14.4 cm) Having weight Weight: 1.266 Kg of standard shape with bracket of the same materials with snap fittings of approved quality and colour
25
-
-
Providing and fixing ES81A Automatic Soap Dispenser Construction : Stainless Steel #316 Grade,Capacity : 1100 ML, Spray Amount : 2 ml, Sensing Range :1cm-8cm, Operation: Electrical or Battery (D size x 4).
25
-
-
Replacement of Urinal Sensor Battery (AA or AAA) of approved make DURACELL Only
500
-
-
Replacement of Urinal Sensor Battery CR-P2, 6V or 12V, Li-Ion of approved make DURACELL or Panasonic Only
100
-
-
Providing and fixing Wall Mounted Automatic Infrared Urinal Flush Valve Touchless of approved make Euronic or Jaquar or equivalent with approval of Engineer In-Charge
20
-
-
Providing and fixing Sensor Flushing Valve for Urinal Description :Sensor Flushing Valve for Urinal with Complete Kit (Battery Operated) Jaquar Code :SNR-CHR-51097 or equivalent with approval of Engineer In-Charge
10
-
-
Providing of Extension Chord Havells EcoStar 4+1 Surge & Spike Guard with 4m Wire, Model AHNKXXR004, Wattage 1440 Watts,Product Dimensions 26 x 13.5 x 4 cm; 300 Grams
200
-
-
Providing and Fixing of Cylindrical Brass Urinal pipe, for Sanitaryware of Size 18" all complete as per direction of Engineer In-Charge
50
-
-
Providing and Fixing of JKC Jaguar Type 32mm or 40mm Metropole Flush Repair Replacement Spare Parts Suitable for Jaguar Metropole Flush Valve for Toilet
50
-
-
Providing and Fixing of JKC Jaguar Type 32mm or 40mm Metropole Flush Repair Replacement Spare Parts Suitable for Jaguar Metropole Flush plunger for Toilet
50
-
-
Providing and Fixing of JKC Jaguar Tap Spindle for Water tap Spares and Accessories Parts for Jaquar Type Tap
50
-
-
Providing C.I. grating 150x150 mm (Square or Round as per requirement)
50
-
-
Providing C.I. grating 125x125 mm (Square or Round as per requirement)
50
-
-
Providing Plumb Pak PP837-36L Toilet Seat Hinge, Polished Brass 26.9 x 14.2 x 3.8 Centimeters LxWxH
50
-
-
Providing JKC Marc Type Toilet Flush Valve Repair or Replacement kit 35mm x 1.5" Full Brass with Heavy Rubber Washer Seal or Gasket Ideal for Marc Type Flush Only
50
-
-
Providing Flush Tank Syphon Kit Full Set, Flushing Cistern Accessories, Standard Size Hindware, CERA or equivalent as per direction of Engineer In-Charge
50
-
-
Providing & Fitting Brass Spindle or tap Phase - Spare Part for Taps Repairing/Disc Tap Inner Cartridge for Jaquar or equivalent as per direction of Engineer In-Charge
100
-
-
Wash Basin Waste Coupling 32 mm
100
-
-
Wash Basin Waste Coupling 40 mm
10
-
-
Wash Basin flexible Waste Pipe
50
-
-
Providing and Fixing of Godrej Locking Solutions and Systems 8171 Stella 6 Levers Steel Door Handle with Lock Set, Item Weight not less than 520 Grams which include: 1n lock, 1n striker plate, 1n handle set, 1n square shank, 2n keys, tools & labours all complete as per direction of Engineer In-Charge
50
-
-
Providing and Fixing of Cylindrical Godrej Locks 3792 Key Lock (Polished Finish) description: Single panel doors 32mm to 45mm thick, The lock can operated with key from outside, Backset : 60mm, Pin cylinder mechanism in brass,Automatic deadlocking,Item Weight not less than 600 Grams tools & labours, all complete as per direction of Engineer In-Charge
50
-
-
Providing and Fixing of Godrej C0712 Speed Hydraulic 60kg Door Closer, Maximum Closing Moment: 14Nm ; Other Dimensions: Door Weight : 60 kg, Door Panel Width : 1000 mm, Door Opening Angle : 180°,Warranty: 1 Year warranty from the date of invoice Material: Stainless Steel,Item Weight not less than 1 kg 370 g, tools & labours,all complete as per direction of Engineer In-Charge
50
-
-
Providing and Fixing of Heavy Duty Antique Brass single leg hanging type Door Stopper 5"-125mm tools & labours,all complete as per direction of Engineer In-Charge
250
-
-
Providing and fixing bright finished brass butt hinges (heavy type) with necessary screws etc. complete :
150mm
150
-
-
Providing and fixing Black Metal Keyboard Tray With Mouse tray and keyboard Channels Along with the hardware accessories Black Finish powder coated.
100
-
-
Providing Finolex 1.5 mm 3 Core 100 m Flexible Wire or Equivalent
10
-
-
Providing and fixing of Regular Steel (Magnetic) Whiteboard for Office, Description:Resin Coated Steel Writing Surface, Alloy Aluminium (6063-T6 Frame), Paper Honeycomb Core & Virgin ABS Corners inclusive of transportation and labour all complete as per direction of Engineer in-Charge
15
-
-
Providing and fixing of Notice Pin-up Board/Pin-up Board/Soft Board/Bulletin Board/Pin-up Display Board for Office, Description: Softboard Core, Alloy Aluminium (6063-T6) Frame, Premium Flocked Fabric Cloth Surface & Virgin ABS Corners inclusive of transportation and labour all complete as per direction of Engineer in-Charge
30
-
-
Removing old fabric and refixing with new for fabric Notice Pin-up Board Upholestry Premium Flocked Fabric Cloth Surface inclusive of Material and labour all complete as per direction of Engineer in-Charge
100
-
-
Providing Teak Wooden Sturdy Coat Stand/Cloth Hanger with Two Drawers of Size : 90 x 33 x 48 cm, with proper polished finish inclusive of transportation and labour all complete as per direction of Engineer In-Charge.
20
-
-
Providing Teak Wooden Coat Stand/Cloth Hanger - Pedestal Type of Size : 43 Inch, with proper polished finish inclusive of transportation and labour all complete as per direction of Engineer In-Charge.
20
-
-
Supply & placing in position 8 mm thick table glass of different required sizes with edges polished Make:-(Modiguard,Saint-Gobain or Ashahi.) with beveled edge
100
-
-
Removing existing hydraulic floor spring and providing & fixing with new Hydraulic floor spring for Wooden / Glass door inclusive of material and labour all complete of make Ozone or Godrej or equivalent as per direction of Engineer in-Charge
20
-
-
Providing and fixing of Transparent or Sun Control films on Glass of Window/Doors or Partition of cabin all inclusive of material and labour all complete as per direction of Engineer In-Charge
200
-
-
Supply of powdered coated coloured planter made of stainless steel, non breakable with modern outlook and scratch proof coating having a protective ring at the base which prevents damage to the floor & water proof edges of required size including transportation, unpacking, labour all complete of approved make or as per direction of Engineer In-Charge:
-
-
-
8"X 8" or 06 ltrs.
20
-
-
10"X 10" or 12 ltrs.
20
-
-
12"X 12" or 22 ltrs.
20
-
-
Supply of Artificial Grass PVC Plastic Durable Stick Turf Mat of required shape and size including transportation, unpacking, labour all complete of approved make or as per direction of Engineer In-Charge:
50
-
-
Supply of Stainless Steel Ashcan Bin / Pushcan Bin/ Waste basket for dry waste like papers and office waste etc, having a protective ring at the base which prevents damage to the floor & fingerprint-proof finish with dent resistant heavy guage stainless steel of required size including transportation, unpacking, labour all complete of approved make or as per direction of Engineer In-Charge:
-
-
-
12"X 28" or 60 ltrs.
20
-
-
14"X 28" or 80 ltrs.
20
-
-
Sub-Head: Office Chairs and Furnitures Works
-
-
-
Providing Fabric Visitor Chair of approved make Godrej, Nilkamal or equivalent as per direction of Engineer In-Charge
Pedestal Base: Chrome finish with 5 wheels
Arm Material: Steel Covered with Polyurethane
Seat material: PU Foam covered with Fabric
Chair Type: central tilt
Height Adjustment ± 5(mm): up to 90 mm
Arm Type: Fixed
Arm Movement: N.A
Overall Chair Height ±15mm: 890mm
Warrantee period in number of years: 2 years
50
-
-
Providing Executive Aero High Back Synchro Chair of approved make Godrej as per direction of Engineer In-Charge
Dimensions W x H x D (cm): 76.1 x 114-128.2 x 76.1
Seat Height (cm): 45.5 x 55.5
Finish Color: Black
Primary Material: Glass Filled Nylon
Upholstery Material: Fabric
Armrest Type: Adjustable
Net Weight (kg): 16
Warranty: 1 Year
50
-
-
Providing Executive Aero Mid Back Synchro Chair of approved make Godrej as per direction of Engineer In-Charge
Dimensions W x H x D (cm): 76.1 x 114-128.2 x 76.1
Seat Height (cm): 45.5-55.5
Finish Color: Black
Primary Material: Glass Filled Nylon
Upholstery Material: Mesh Fabric
Net Weight (kg): 15.5
Warranty: 1 Year
50
-
-
Providing and Repairing Hydraulic system for chairs, with necessary spare parts, tools & plant including labour of approved make: Godrej or Equivalent all complete as per direction of Engineer in-Charge.
-
-
-
Visitor Chairs
200
-
-
Executive Chairs
200
-
-
Providing and Repairing Chrome coated wheels for chairs, with necessary spare parts, tools & plant including labour of approved make: Godrej or Equivalent all complete as per direction of Engineer in-Charge.
-
-
-
Visitor Chairs
200
-
-
Executive Chairs
200
-
-
Providing and Repairing Office Chair Armrest for chairs, with necessary spare parts, tools & plant including labour of approved make: Godrej or Equivalent all complete as per direction of Engineer in-Charge.
-
-
-
Visitor Chairs
100
-
-
Executive Chairs
100
-
-
Change of Upholestry with fabric and mesh fabric inclusive of material and labour all complete (Both Sides)
-
-
-
Visitor Chairs
100
-
-
Mid-Back Chairs
100
-
-
High-Back Chairs
100
-
-
Providing Memory Foam Back Rest Cushion-Ergonomically Designed for Lumbar Support Extra Wide Comfortable Pillow for Chair - Black inclusive of transportation and labour all complete as per direction of Engineer In-Charge.
30
-
-
Sofa Repair and upholstery per seat with Cusion, foam and apporved Fabric with repair of wood if any (excluding 40 density cusion seat) French sprit Polish one or more coat on old work.
50
-
-
Sofa Repair and upholstery per seat with Cusion, foam and apporved Fabrice with repair of wood if any (including 40 density cusion seat) French sprit Polish one or more coat on old work.( If cushion of ISI mark for 40density is not replaced Rs. 625/- will be deducted at the rate of per seat.)
50
-
-
Sofa Repair and upholstery per seat with Cusion, foam and apporved Leather with repair of wood if any French sprit Polish one or more coat on old work.
50
-
-
Repair and upholstery of wooden Chair including Foam, Cusion, Repair of wood, Fabrice & Nails/stepels
50
-
-
Cost for Polish each wooden chair/ wooden visitor chair/wooden sofa chair (Including Applying Oil based putty, Scrubing etc. to make surface smooth, Spot less & Polishing)
100
-
-
Removel of old polish of Furniture, Table, paneling, cup board etc.
100
-
-
Cost for Re- Polish each Officer table complete (Including Applying Oil based putty, Scrubing etc. to make surface smooth, Spot less & Polishing) of DGM, GM level and Above.
100
-
-
Side table polishing of DGM, GM Level and above.
100
-
-
Sub-Head: Name Plate
-
-
-
Steel Name Plate with Engraved letter Size 10" x 3"
200
-
-
Brass Name Plate with Engraved letter size 18"X6"
50
-
-
Providing and fixing hooks, clips and chains Brass or Stainless steel for roof hanging of Name Plates
100
-
-
Sub-Head: DRY Cleaning Work
-
-
-
Dry cleaning of Sofa (Single Seater, Two Seater and Three Seater) as instruction of Engineer-in Charge.
300
-
-
Dry cleaning of all type chairs as instruction of Engineer-in Charge.
250
-
-
Sub-Head: Blind Work
-
-
-
Supply and Installation of Roller Blinds having the Control unit: The Control unit is made of high strength reinforced plastic. The clutch is of wrap spring design. High carbon steel springs are provided to transmit motion from driving to driven members of clutch mechanism. Clutch is operated directionally by the use of endless beaded chain. Clutch never needs any adjustment. Head rail: It is an aluminum extruded rail Powder coated in white. Control unit and Idler are mounted on the Head rail with powder coated M.S. brackets. Roller tube : It is Aluminum alloy Extruded grooved tube, which is anodized.Size- 38mm- O.D.; weight - 0.38 kg/mtr,Alloy & temp- 6063-T6
Fabric is fitted on the tube with double sided tape.
The END PLUG shall be moulded of plastic with a steel location pin. The plug shall be inserted into the tube end. (Opposite to the Drive Unit).
Idler: Idler is of high strength reinforced plastic, consisting of a centre shaft. The idler is mounted on the bracket by using a plastic lock. The metal sleeve inside the plastic lock provides bearing surface for the centre shaft, which rotates freely, providing smooth, quiet and long wearing operation.
-
-
-
Bottom rail: It is an aluminum extruded rail with a groove for fixing the fabric and power coated in white. Size: 21mm O.D.Alloy-HE9WP
Weight-0.28 Kg/mtr. It is fixed to the bottom of the fabric and the purpose of it is, to keep the fabric in tension and straight. The fabric is fitted to the tube using plastic insert. The end caps of the tube are ABS. Operating chain: This is made of 4.5mm plastic beads molded on 2.2mm thick polyester chord. The pitch of the beads is 6mm. The chain drives the sprockets of the control unit to close and open the blind. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation.
-
-
-
Fixing brackets & clamps: These are used to fix the blind to the wall or ceiling. 'L' bracket is made of mild steel and zinc plated. The clamp is made up of spring steel of thickness O.7mm and zinc plated. The FABRIC shall be as per the following properties:
Characteristics Values
Composition 75% PVC, 25% Polyester
Openess Factor 5%
Weight per m2 465gsm/ ± 5
Thickness 0.65 mm
Fire Resistance NFPA 701,BS5867 Part-2-Type-A
Gaurantee Tearing Strength 4.5 Kgf Warp
Bursting Strength 34Kgf
Colour Fastness to light 8 Grade
Colour 2
200
-
-
Supply and Installation of Vertical/Horizontal Blinds 100m width having the Control unit: The Control unit is made of high strength reinforced plastic of aprroved make Nova,MAC or Vista.
200
-
-
Repair for mechanism of roller, horizontal or vertical blinds, including of installation of any accessories required all complete inclusive of tools and labours, as per direction of engineer in-charge
50
-
-
Sub-Head: Wooden Work
-
-
-
P/F marine plywood for cupboard/shutter of approved quality ( century/ kitply/ Achor or it equivalent) confirming to IS: 710 including cutting into required size, jointing with nails adhesive, P/F 4mm thick second class teak wood beading on its edges with nails and adhesive etc. complete as directed by the EIC.
-
-
-
19 mm thick
50
-
-
12 mm thick
100
-
-
6 mm thick
20
-
-
Providing & Fixing Wooden drawer having a size of 0.55 m x 0.45 m x 0.7 m including handle, channel, lock & other fitting as per the direction of EIC.
10
-
-
Providing and fixing wooden partation with wooden framing 50mm*50mm,veneer 3.5mm both sides & melamine polishing of finished surfac. Complete in all respect as approved by engineer (basic price of veneer 100sqft)
50
-
-
Wooden cabinet/almirah with 18mm Comercial board sunmica on one side of thickness 1.5 mm, shutters fix with piano hings and Brass handle etc. Dah fastner, nail, fevicol etc. for fixing complete in all respect
50
-
-
Modification of old Almira to new size With Veneer
10
-
-
Modification of old Almira to new size With Sunmica
10
-
-
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 350/400 mm long with screws etc. complete as per directions of Engineer- in-charge.
50
-
-
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 600 mm long with screws etc. complete as per directions of Engineer- in-charge.
50
-
-
Supply of Stainless Steel Corner L Angle Bracket (L-Patti)
(Set of 8 pcs.)
50
-
-
Supply of Iron Door Chapka Kunda, Thickness: 2.6 - 3 mm X 100 mm
300
-
-
Supply of Hettich Onsys 4447i Soft Close Hinges for up to 25mm Thick Door 0 Crank Pack of 2 Set (4pcs.) (L-Bihari Kabja)
50
-
-
Supply of Hettich Onsys 4447i Soft Close Hinges for up to 25mm Thick Door 8 Crank Pack of 2 Set (4pcs.) (L-Bihari Kabja)
50
-
-
Supply of Heavy Duty Sliding Roller Set
50
-
-
Full Height Partitions: 70- 100mm Thick full height partitions in Solid finish with Laminate/Fabric/Marker/soft board finish.
Partition will have double skin provision for 12mm thick tiles.Structure material and all exposed will be aluminum finish and the connecting members used for joining false ceiling to hard ceiling are CRCA powder coated . Panel finish option are Laminated Marker , Laminate , Fabric and Soft board.
100
-
-
Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side having 12 mm air gap including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete.
100
-
-
Sub-Head: Repair to Miscellaneous Items
-
-
-
Visiting charges of 2 technician twice in a month for check up and repair of furniture/ compactor including minor repair and shelf repair
24
-
-
Bearing of Compactor
50
-
-
Chain of compactor
20
-
-
Handle Round
50
-
-
Rail pair of compactor
50
-
-
Repair of compactor body
50
-
-
Steel Almirah
-
-
-
Replacement of lock
20
-
-
Replacement of lock Handle
20
-
-
Repairing of lock system
20
-
-
Major repair
20
-
-
Minor repair
20
-
-
Adjustmnet of shelves
20
-
-
Providing Key
20
-
-
Opening of Lock Almirah
20
-
-
Repair of Lock
20
-
-
Providing fixing shelves
20
-
-
Providing and fixing of new bush
200
-
-
Repair of Door
20
-
-
Steel Table
-
-
-
Adjustmnet of drawer
20
-
-
Minor repair
20
-
-
Providing Key
20
-
-
Opening of Lock Almirah
20
-
-
Repair of Lock
20
-
-
Providing fixing shelves
20
-
-
Providing and fixing of new Channel
20
-
-
Repair of Shelves
20
-
-
Wooden Table
-
-
-
Adjustmnet of drawer
20
-
-
Minor repair with fevicol & nail
20
-
-
Opening of Lock
20
-
-
Repair of Lock
20
-
-
Providing fixing shelves
50
-
-
Providing and fixing of new Channel
100
-
-
Repair of Shelves
50
-
-
Providing and fixing complete sunmica top
50
-
-
Replacement of Handle
99
-
-
Wooden Drawer 45X45X75 cm
-
-
-
Minor repair with fevicol & nail
150
-
-
Opening of Lock
100
-
-
Repair of Lock
100
-
-
Providing and fixing of new Channel
200
-
-
Repair of Shelves
150
-
-
Replacement of Handle
150
-
-
Wooden Drawer 75X45X75 cm
-
-
-
Minor repair with fevicol & nail
100
-
-
Opening of Lock
100
-
-
Repair of Lock
100
-
-
Providing and fixing of new Channel
100
-
-
Repair of Shelves
100
-
-
Replacement of Handle
100
-
-
Wooden Almirah height upto 1.2 m
-
-
-
Replacement of lock
150
-
-
Replacement of Handle
150
-
-
Repairing of lock system
150
-
-
Major repair
100
-
-
Minor repair
100
-
-
Adjustmnet of shelves
150
-
-
Providing Key
150
-
-
Opening of Lock Almirah
150
-
-
Providing and fixing of hinge
150
-
-
Repair of Door
150
-
-
Replacement of wheel of Document/Luggage trolly including
fitting/welding & Trolly screws etc.
20
-
-
Wooden Almirah more then above height 1.2 m
-
-
-
Replacement of lock
100
-
-
Replacement of Handle
100
-
-
Repairing of lock system
100
-
-
Major repair
100
-
-
Minor repair
100
-
-
Adjustmnet of shelves
100
-
-
Providing Key
100
-
-
Opening of Lock Almirah
100
-
-
Providing and fixing of hinge
100
-
-
Providing fixing shelves
100
-
-
Repair of Door
100
-
-
Change of Veneer on existing wooden furniture with complete
polish, beading and fixing etc
100
-
-
Sub-Head: Repair to Work Stations
-
-
-
Repair of work station partion by providing wooden panel, pin board and MS plate replacement etc.complete .
200
-
-
Refixing of work station
25
-
-
Removing of work station
25
-
-
Sub-Head: Sanitary Work
-
-
-
Supplying, Installation, Testing and Commissioning white vitreous china extended wall mounting water closet of size 525x360x420 mm with intergrated jet of approved shape including seat cover, and fittings, nuts, bolts and gasket etc complete including cutting and making good the wall wherever required.(MAKE - CERA -Cat No.-S1051119)
5
-
-
Supplying, Installation, Testing and Commissioning white vitreous china extended wall mounting water closet of size 525x360x365 mm with intergrated jet of approved shape including seat cover, and fittings, nuts, bolts and gasket etc complete including cutting and making good the wall wherever required.(MAKE - CERA -Cat No.-B1530104 CRYO with integrated jet)(MAKE-TOTO,CODE-CW812JWS#W)(MAKE-KOHLER,CODE -K-5053IN-00)
2
-
-
Supplying, Installation, Testing and Commissioning of twin flush concealed cistern with knob and frame and fittings, nuts, bolts and gasket etc complete including cutting and making good the wall wherever required.(MAKE - CERA (Cat No. -B1110108 & B1120118)(MAKE-TOTO,CODE-WH076MFF)(MAKE-KOHLER,CODE -K-77028IN-M-NA)
7
-
-
Supplying, Installation, Testing and Commissioning white vitreous china extended wall mounting water closet of size 500x360x350 mm with intergrated jet of approved shape including seat cover, and fittings, nuts, bolts and gasket etc complete including cutting and making good the wall wherever required.(MAKE - CERA - Cat No.-B1510101 CARAT WITH JET)(MAKE-JAQUAR,CAT NO-SLS-WHT-6951J)(MAKE-KOHLER,CODE-K-16817IN-SR-00)
1
-
-
Supplying, Installation, Testing and Commissioning white vitreous cistern cutting and making good the wall wherever required.(MAKE - CERA Cat No.-B1010102)(MAKE-JAQUAR,CAT NO-WHC-WHT-184L)
1
-
-
Supplying, Installation, Testing and Commissioning Table top wash basin with C.I. brackets with waste of standard pattern with waste fitting, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 640x450 mm.(MAKE - CERA (Cat No. -S2020132,F8050301)(MAKE-TOTO,CODE -LW710CM#NW1,T6JV6)(MAKE-KOHLER,CODE -K-4117IN-XBV-0)
5
-
-
Supplying, Installation, Testing and Commissioning Table top wash basin with C.I. brackets with waste of standard pattern with waste fitting, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 640x450 mm.(MAKE - CERA (Cat No. -S2020132,F8050301)(MAKE-TOTO,CODE -LW710CM#NW1,T6JV6)(MAKE-KOHLER,CODE -K-4117IN-XBV-0)
2
-
-
Supplying, Installation, Testing and Commissioning white vitreous battery based infrared sensor operated urinal of approx. size 360 x 330 x 740 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.(MAKE - CERA (Cat No. -S4010101)(MAKE-TOTO,CODE -USWN810BE#XW)(MAKE-KOHLER,CODE -K-4915T-0)
5
-
-
Supplying, Installation, Testing and Commissioning C.P. Single lever basin mixer with 355mm long extended body 450mm braided connection pipe (without pop-up) including cutting and making good the wall wherever required. (MAKE - CERA (Cat No. -F1004452)(MAKE-TOTO,CODE -TTLR303FV)(MAKE-KOHLER,CODE -K-97067IN-4-CP)
7
-
-
Supplying, Installation, Testing and Commissioning C.P. Bottle Trap including cutting and making good the wall wherever required. (MAKE - CERA (Cat No. -F8060401)(MAKE-JAQUAR,CAT NO-ALD-769L300x190)(MAKE-KOHLER,CODE -K-7314IN-CP)
20
-
-
Supplying, Installation, Testing and Commissioning of Toilet Paper Holder fixed with CP brass screw complete.(MAKE - CERA (Cat No. -F5002109)(MAKE-JAQUAR,CAT NO-AHS-1553)(MAKE-KOHLER,CODE -K-11584-CP
20
-
-
Providing, fixing, Testing and Commissioning of CP brass two way bib cock with wall flange including, necessary flange, cutting and making good he walls / floors wherever required complete.(MAKE - CERA (Cat No. -F2007161)(MAKE-JAQUAR,CAT NO-ARI-39041)(MAKE-KOHLER,CODE -K-37320IN-4-CP)
20
-
-
Supplying, Installation, Testing and Commissioning C.P. cast brass twin coat hooks fixed to wooden cleats with C.P. brass screws.(MAKE - CERA (Cat No. -F5004108)(MAKE-JAQUAR,CAT NO-AKP-35761P)(MAKE-KOHLER,CODE -K-15247IN-CP)
20
-
-
Providing, fixing, Testing and Commissioning automatic Aerosol Dispenser with wooden cleats and C.P. brass screws including cutting and making good the wall wherever required (Make-Utec, Model No.-UT-6MA)(Make-Phillips)
5
-
-
Supplying, Installation, Testing and Commissioning of Towel Ring fixed with CP brass screw complete.(MAKE - CERA (Cat No. -F5002105)(MAKE-JAQUAR,CAT NO-ACN-1121BN)(MAKE-KOHLER,CODE -K-5631IN-CP)
10
-
-
Supplying, Installation, Testing and Commissioning of Soap Dish fixed with CP brass screw complete.(MAKE - CERA (Cat No. -F5001106)(MAKE-JAQUAR,CAT NO-AQN-7731)(MAKE-KOHLER,CODE -K-17524T-CP)
10
-
-
Providing, fixing, Testing and Commissioning C.P. liquid soap dispenser with bracket of the same materials of approved quality colour and make including cutting and making good the wall wherever required. (MAKE - CERA (Cat No. -F5002111)(MAKE-JAQUAR,CAT NO-ACN-1135N)(MAKE-KOHLER,CODE -K-10712D-CP)
10
-
-
Supplying, Installation, Testing and Commissioning Automatic Hand Dryer 235 x 205 x 265 mm (stainless steel) with wooden cleats and C.P. brass screws including cutting and making good the wall wherever required. (MAKE - CERA (Cat No. -B2220101)(MAKE-JAQUAR,CAT NO-HDR-SAP-M99ACS)(MAKE-TOTO,CODE-TYC122W)
5
-
-
Supplying, Installation, Testing and Commissioning C.P. angle cock with wall flange including cutting and making good the wall wherever required. (MAKE - CERA (Cat No. -F2011201)(MAKE-JAQUAR,CAT NO-KUP-35053PM)(MAKE-KOHLER,CODE -K-80154IN-4-CP)
20
-
-
Supplying, Installation, Testing and Commissioning C.P. connection pipe including cutting and making good the wall wherever required. (MAKE - CERA (Cat No. -F8070403)(MAKE-JAQUAR,CAT NO-ALD-805B)
20
-
-
Supplying, Installation, Testing and Commissioning Stainless Steel kitchen sink with drain board (304 grade SS) with CI brackets and stainless steel waste with plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required.(MAKE - CERA (Cat No. -B4512203)(MAKE - SANJAY CHILLEY)
Kitchen sink with drain board 1040x500 mm bowl depth 205mm.
2
-
-
Supplying, Installation, Testing and Commissioning 15mm C.P brass mixing fitting for kitchen sink with swivel spout with connecting legs and wall flange complete. Including cutting and making good the walls wherever required.(MAKE - CERA (Cat No. -F2011511)(MAKE-JAQUAR,CAT NO-DRC-37165)
5
-
-
Providing and fixing hand shower (Health Faucet) with 6mm dia., 1 m long PVC tube and wall hook all complete Jaquar ALD-CHR-563 or as approved by the Engineer-in-Charge.
100
-
-
Providing and fixing C.P. brass two way bib taps long body (Jaquar Cat NO. 15041 or as approved by the Engineer-in-Charge) including cutting and making good the walls wherever required.
-
-
-
15mm dia
20
-
-
Providing and fixing shower CP single lever concealed diverter JAQUAR Cat. No. 15075 or as approved by the Engineer-in-Charge.
5
-
-
Providing and fixing shower Bath tub spout with button attachment JAQUAR Cat. No. 463 or as approved by the Engineer-in-Charge.
5
-
-
Providing and fixing shower arm JAQUAR Cat. No. 477 & 489 or as approved by the Engineer-in-Charge.
10
-
-
Providing and fixing telephonic shower JAQUAR Cat. No. 557 or as approved by the Engineer-in-Charge.
10
-
-
Providing and fixing C.P. brass bib taps long body (Jaquar Cat NO. 107 or as approved by the Engineer-in-Charge) including cutting and making good the walls wherever required.
-
-
-
15mm dia
5
-
-
Providing and fixing C.P. brass pillar cock of approved quality
(Seiko or equivalent) conforming to IS:8931 for wash basin.
-
-
-
15 mm dia nominal bore (jaquar)
10
-
-
P/F 150 x 150 mm PVC moulded three piece Nahani trap jali with or without hole i/c cutting& making good to the flooring etc. complete.
2
-
-
P/F hand shower with flexible PVC connection & hooks for hanging hand shower etc complete.
2
-
-
Providing, fixing and testing UPVC floor trap fixed on bed of cement concrete with 1:2:4 (1 cement: 2 coarse sand : 4 graded aggregate 10mm nominal size) with 150x150mm cockroach trap consisting of stainless steel grating of Metro / Chilly make or approved equivalent etc., all complete including cutting and making good the beams, slab etc wherever required etc all complete as directed by the Engineer-in-Charge.
-
-
-
40/ 50/ 63 dia inlet and 75 dia outlet.
2
-
-
Filling joints of existing Ceramic tiles flooring/ dado in kitchen/ bath/ wc /passage with white cement mixed with approved water proofing materilas complete as directed by the Engineer -in Charge.
10
-
-
Providing and fixing white glazed vitreous China wall mounted European type water closet with seat and lid, C.P. brass hinges and rubber buffers, CP flush valves of an approved design, including cutting and making good the walls and floors where required.
-
-
-
Hindware make ARMADA cat. No. 92036 / Parryware cat. No. cardiff C0264 / Cera cat. No. CROME 2086 with sensor type concealed flushing valve for western commode complete set Jaquar cat no. 51093./ESS-ESS CAT.NO.RLAFS101CFLSAB /ANGASH MAKE. 'P' trap distance 13.5cm.or as approved by the Engineer-in- Charge.
2
-
-
Providing and fixing white glazed vitreous European type water closet with seat and lid, C.P. brass hinges and rubber buffers, vitreous china flushing cistern with fittings, brackets, overflow pipe with mosquito proof coupling of an approved design, including cutting and making good the walls and floors where required.
-
-
-
European water closet Hindware Cat No. 20041 / Parryware cat. No. C0241/49 / Cera cat. No. 2009 and dual flushing cistern with lid (3/6 litre capacity) or as approved by the Engineer-in-Charge.
3
-
-
Extra over and above item No. 1.1 (a) for providing and fixing pastel colour European type water closet with pastel colour plastic seat with cover instead of white.
5
-
-
Extra over and above item No. 1.2 (a) for providing and fixing pastel colour European type water closet with pastel colour plastic seat with cover instead of white.
5
-
-
Providing and fixing white glazed vitreous china wash basins with C.P. pillar tap, C.P. brass waste 32mm C.P. bottle trap and unions and sealing of joints between wash basins and counter slabs around the wash basins with Silicone rubber cement of approved make of matching colour all complete including cutting and making good the walls and floors where required.
-
-
-
Hindware make ARMADA Cat. No. 91009 / Parryware cat. No. C 8470/Cera cat. No. 1043 with single lever basin mixer without popup water system with 450mm long braided hoses JAQUAR Cat. No. 15011 B / Parko cat. No. 21001A / Kingston cat. no. KRA 002 or as approved by the Engineer-in-Charge.
2
-
-
Hindware Wash basin No. 10045 /Parryware cat. No. C 0412/ Cera cat no. 1005 with CP pillar tap Jaquar Cat. No. 15001 / Parko cat. No. 2101A / Kingston cat. No. KRA 016 or as approved by the Engineer-in-Charge.
1
-
-
Hindware. Wash basin No. 10001/ Parryware cat. No. C 0432 / Cera cat. No. 1008with CP pillar tap Jaquar Cat. No. 15001 / Parko cat. No.2101A / Kingston cat. No. KRA 016 or as approved by the Engineer-in-Charge.
5
-
-
Extra over and above item no. 1.5 (b) and 1.5 (c) for providing and fixing CP mixer instead of pillar tap Jaquar cat. No. 15011B / Parko cat. No. 21001A / Kingston cat. No. KRA002 as approved by the Engineer-in-Charge.
5
-
-
Providing And Fixing Single bowl with single drain board over all size 940 x 465 x 178 mm deep or nearest commercial size available as approved by the Engineer-in-Charge).
2
-
-
Providing and Fixing CP brass single lever sink mixer with swinging spout wall mounted model (Jaquar Cat. NO. 15163 / Parko cat.no. 21004/Kingston cat. no. KRA005 as approved by the Engineer-in- Charge).
10
-
-
Providing and fixing 600mm x 450 mm beveled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
5
-
-
Providing and fixing C.P. brass twin robe hooks, JAQUAR Cat. No. 1161 / Parko cat. No. 1582 / Kingston cat. No. KRI - 29 or as approved by the Engineer-in-Charge.
10
-
-
Providing and fixing 15mm C.P. brass angle valve (Jaquar Cat No. 053 / Parko cat. no. 2119A/ Kingston cat. no. KRA 014 or as approved by the Engineer-in-Charge) union nuts complete with C.P. brass flange including cutting and making good the walls wherever required.
10
-
-
Providing and fixing 15mm C.P. brass connection pipe Jaquar Cat No. 803 as approved by the Engineer-in-Charge) union nuts complete with C.P. brass flange including cutting and making good the walls wherever required.
10
-
-
Providing and fixing stainless steel toilet paper holder (JAQUAR Cat. No. 1151 / Parko cat. no. 1553 / Kingston cat. no. KRI-28 or as approved by the Engineer-in-Charge) fixed in position by means of C.P. screws and rawl plugs embedded in the walls complete including cutting and making good the walls wherever required.
10
-
-
Providing and fixing C.P brass towel rails (JAQUAR Cat. No. 1111 / Parko cat. No. 1555 / Kingston cat. No. KRI-25 or as approved by the Engineer-in-Charge) complete with C.P. brass brackets fixed to rawl plug of approved design with C.P. brass screws.
10
-
-
Providing and fixing CP brass towel rack (JAQUAR Cat. No. 1181 / Parko cat. No. 1575 / Kingston cat. No. KRI-24 (24" long) or as approved by the Engineer-in-Charge) complete with CP brass brackets fixed to rawl plug of approved design with CP brass screws.
10
-
-
Providing and fixing CP brass towel ring (JAQUAR Cat. No. 1121 / Parko cat. No. 1576 / Kingston cat. No. KRI-26 or as approved by the Engineer-in-Charge) fixed to rawl plug of approved design with CP brass screws.
10
-
-
Providing and fixing stainless steel soap dish JAQUAR Cat. No. 1131 / Parko cat. No. 1552 / Kingston cat. No. KRI-27 or as approved by the Engineer-in-Charge.
5
-
-
Providing and fixing CP brass shower with revolving ball joint Jaquar Cat No. 493 as approved by the Engineer-in-Charge.
5
-
-
Providing and fixing shower arm Jaquar Cat No. 483 Parko cat. No. 2174 / Kingston cat. No. KRA011 as approved by the Engineer-in- Charge.
5
-
-
Providing and fixing CP brass concealed stop cock reduced body Jaquar Cat No. 089 / Parko cat. No. 2117 / Kingston cat. No. AGR 306 or as approved by the Engineer-in-Charge.
5
-
-
Providing and fixing CP bath spout Jaquar Cat. No. 429 /PARK Cat.no.21006/KINGSTON Cat.no.KRA 015 as approved by the Engineer-in-Charge.
5
-
-
Providing and fixing S.S. hinged grating, 6mm thick with frame as approved by the Engineer-in-Charge) including setting in floor with cement mortar 1:3.
25
-
-
Hindware Studio Cistern Catalouge No-21028, Ivory Floor mounted WC or equivalent
3
-
-
Hindware Ultra wall mounted closet, Catalouge no-20006, Ivory, wall mounted WC or equivalent
2
-
-
Sub-Head: False Ceiling Repair
-
-
-
Providing and fixing false ceiling system manufactured by M/s. Armstrong /Aerolite World Industries / Gyproc using hot dipped galvanized steel section, rotary stitched main tee of size 24mm x 42 mm web height, having 0.36 mm gauge at every 600 mm centre to centre maximum and rotary stitched cross tee of size 24 mm x 42 mm, having 0.33 mm gauge at every 600 mm. c/c. and wall angle of size 19 x 19 mm., having 0.35 mm gauge fixed to the periphery of the wall. The above grid is suspended at every 600mm c/c. in both directions using 2.0 mm. thick pre-straightened GI wire laying ARMSTRONG OPTRA of ceiling tiles of size1200 X 600 X 20mm having NRC 90 Light reflectance of 85% (WT), thermal conductivity k = 0.052-0.057 W/m0K, Humidity Resistance of 99% , having Fire Performance CLASS O / CLASS 1 (BS 476), surface having 3 coats of white paint with Fine Fissured, back of the tile duly sanded and finished with a coat of protective paint over the formed grid complete.Note : Rate quoted for the item deemed to include all wastages
10
-
-
Supply and Installation of approved , Veneer laminated finish, square edge, FR grade, fiberboard core panel of size 595x595x12mm thick having density 800Kgs/ m3, weight 9.6 kg/m2 which is suspended by using 0.3mm thick and 24mm wide pre coated metal T24 grid system.
The T24 Grid system of 600x600mm module shall include wall angle(WA24W30) with equal flanges of size 24mm wide, length 3000mm, 0.4mm thick fixed along the perimeter of walls with the help of nylon sleeves and suitable fasteners at 300mm centers.
-
-
-
Then suspend the Main T24 (MT24W36) having flange width 24mm, height 38mm and length 3600mm from the soffit with help of soffit cleat and wire rod along with leveling spring clip at 1200mm c/c. Cross T24 (CT24W12) with flange width 24mm, height 25mm and length 1200mm is then interlocked into the pre-cut slots in the Main T24 at 600mm centers in the direction perpendicular to the MainT24. Finally Cross T24 (CT24W06) having flange width 24mm, height 25mm and length 600mm are then interlocked into the precut slots in the 1200mm Cross T24 at 1200mm centers and in direction parallel to the Main T24.
Sonator square edge of size 595x595x12mm thick shall be placed into the grid size of 600x600mm. Note:- Skelet T24 should be of same shade and finish as that of Sonator panels. • Core - Fiberboard • Fire – Class 1 & P • Acoustics – NRC upto 0.3(system NRC) • Climate (OC RH) – 40, 70 • Termite resistance – Yes • Light reflectance – Colour dependent • Green (RC %) – 25 • Hygiene (VoC, Clean room) – Low, Class 3 • Strength, Load capacity (Kg) - Antisag
10
-
-
Supply and installation of LOOP® Type 2 system formed as an open metal ceiling with an open area of more than 50% and to the flare [5mm] of the perforation pattern [RV-50-40] the ceiling has a three-dimensional visual effect and hides the insight into the plenum. Bypassing the perforation, the S-shaped sides of the LOOP® interlock both the long and front side joint with a nonmagnetic suspension, the elements are installed with a circumferential 1 mm joint, thus compensating tolerances in x and y direction. The non-magnetic suspension system effectuates a self-alignment of the elements [puzzle effect]. The module size 966x1115x1.0mm GMS is perforated with 60mm deep drawn holes .The substructure consists of a form perforated L profile [U1040] as a lateral grid which is suspended from the ceiling with nonius adjustable upper and lower parts or with threaded rods using official approved dowel plugs. The grid profiles are to be connected together at the ends by means of longitudinal connectors [U 1041] [screw fasteners]. The spacing of the grid profile is according to the requirements of DIN EN 13964 as well as the loads of the system and to be determined and checked by the contractor. The profiles are attached to the walls with U 1042 wall brackets. On profiles angles, C-band raster as secondary profiles are bolted on by means of C channel hanger bracket with M6 bolts. The longitudinal connections of the C-profiles are made by C profile connectors. The attachment to the walls is made with wall brackets.
-
-
-
The ceiling elements are provided with magnets at the back and are force-fitted to the C-profiles. Thus, they are removable without using tools. They are secured with ropes against swinging down in an uncontrolled way. Only construction parts approved by the manufacturer may be used. Provide necessary supports, provisions as per the architects / PM’s Instructions.
Finish of ceiling is in powder coated RAL 9016 white colour or RAL 9006 Silver Grey or Black colour.
5
-
-
Providing and fixing in true level, Open cell False ceiling of approved make containing ‘U’ shaped sections with sharp edges of dimensions 15mm (Flange width) X 38mm (web height) manufactured out of Aluminum of 0.40mm gauge of white colour. The open cell ‘Lock-in’ ceilings shall have 2 components viz. Open cell Main Carrier (top and bottom notches) of length 2000mm, and Horizontal Carrier of length 2000mm. The Open Cell Main Carriers shall have notches on top or bottom spaced at 100mm to be used with matching Horizontal Carriers. The main carriers are suspended at every 600 mm c/c spacing with spans longer than the length of main runner connected by means of connector. The ‘U’ Shaped horizontal carriers are to be interlocked by matching the top and bottom notches to form cells of size 100 mm. the perimeter trim to be secured at every 450mm c/c including provision for opening like diffusers, grills, light fittings, speaker and smoke detector etc., with necessary materials, labour, scaffoldings, tools and tackles, plants etc., and as directed by the Engineer-in-charge. [Note that no deduction shall be made from the overall area of the false ceiling for the openings].
5
-
-
Providing and fixing Baffle False ceiling system of approved make. The baffle ceiling system fixed to the sizes of baffle panels as per drawing, is to comprise of 100mm (h) x 50/25mm (w) with 200mm c/c spacing, 0.6mm thick roll form aluminum section baffles and the length of the panel is up to 4m. Panel shall be clipped to a baked enameled aluminum carrier of 35mm height x 62mm width x 0.95mm thick in a standard length of 5mtr. The primary hanger bracket are fixed by means of 6mm dia galvanised steel threaded rods spaced equally at 1.2m c/c suspended from roof slab. The entire baffle ceiling system is to also include provision for all fixtures like diffuser, grill light fittings, speaker and smoke detector etc., with necessary materials, labour, scaffoldings, tools and tackles, plants etc., and as directed by the Engineer-in-charge. Note: All baffle to be used should be with appropriate % of recycled content. The contractor should provide the material cut sheet/ declaration from manufacturer mentioning the recycled content used in manufacturing of baffle to be used).
5
-
-
Supply and installation of Synth Slim, polyfibre panels, core-pigmented, high-density, SynthPF rigid panels of size 1200x2400x9mm thk, volume density 210 - 230kg/m3, weight 1.9 - 2.1kg/m2 and ,square edge, magnesite-bonded pinewood fibre ceiling tile of size 600x1200x10mm, volume density 400Kgs/m3, weight 4kg/m2 installed by using ceiling framework.
-
-
-
The ceiling framework system shall include Strut WC25 Wall channel, fully knurled, sectional thickness 0.55mm, length 3600mm, unequal flanges of 20 & 30mm and web of 25mm, fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers. Then suspend Strut MC45 Main channels, fully knurled, sectional thickness 0.8mm, length 3600mm, equal flanges of 15mm and web 45mm from the soffit at 1200mm centers with Strut SA25, fully knurled, Suspender angle with sectional thickness 0.55mm, unequal flanges of 25 & 10mm. Strut CC25 Cross channel, fully knurled, sectional thickness 0.55mm, length 3600mm, web 35mm, depth of 20mm and equal flanges 9.5mm is fastened to the Strut MC45 perpendicularly at 600mm centers. Strand is installed on the Strut CC25 with suitable fasteners in staggered manner. Longer edges of the strand should be perpendicular to length of CC25.
-
-
-
Prior to installation of Slim panels, ensure Strand surface behind is flat, dry and free from dust or other contaminants and leveled. Slim panels are then adhered to Strand surface behind with stick S7 adhesive.
-
-
-
Technical Parameters of system
-
-
-
• Fire (Class) – 1 & PB
• Acoustics – NRC ,0.6
• Thermal conductivity (W/mk)– na
• Climate (°C, RH) – 50, 99
• Light reflectance (%) – Colour Dependant
• Green (VoC, RC %) – Nil, 30
10
-
-
Supply and Installation of Strands of selected colours (ref colour chart) Krefed edge Fabric wrapped pinewood panels of size 600x600/1200/ 2400x20mm having density 600Kgs/m3, weight 8kg/m2 installed by using Hspline, GI strut system.
-
-
-
The Strut ceiling framework system shall include Strut WC25 Wall channel, fully knurled, sectional thickness 0.55mm, length 3600mm, unequal flanges of 20 & 30mm and web of 25mm, fixed along the perimeters of the wall with nylon sleeves and suitable fasteners at every 300mm centers. Then suspend Strut MC45 Main channels, fully knurled, sectional thickness 0.8mm, length 3600mm, equal flanges of 15mm and web 45mm from the soffit at 1200mm centers withStrut SA25, fully knurled, Suspender angle with sectional thickness 0.55mm, unequal flanges of 25 & 10mm. Strut CC25 Cross channel, fully knurled, sectional thickness 0.55mm, length 3600mm, web 35mm, depth of 20mm and equal flanges 9.5mm is fastened to the Strut MC45 perpendicularly at 300mm centers. PVC Vinyl core UV treated H-Spline having sectional thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel (CC25) at 600mm centers. The Kerfed edge Strand panels shall be then inserted into the H-spline along their long edges of 1200mm against framework to perfect fit with staggered short edges.
-
-
-
Technical Parameters
-
-
-
• Core Variants - Pinewood fibre
• Fire – Class 1 & P
• Acoustics – NRC 0.95
• Climate (OC RH) – 50, 90
• Termite resistance – Yes
• Light reflectance – color dependant
• Green (RC %) – 10
• Hygiene (VoC, Clean room) – Low
• Strength, Load capacity (Kg) - Ball impact
10
-
-
Providing and fixing backlit Ceiling in acrylic solid surface sheet (basic series) of approved make, manufactured as per guidelines of ISO19712. The acrylic solid surface should be conforming to standards of Green Guard certified, OEHHA, AQMD, UL, Euro class BS1 for fire resistance. Ceiling Installation to be done in translucent glacier ice color, thickness (12 mm), design backlit provision as approved by architect or Engineer-in- charge. The material should be CNC cut to achieve the desired design as per architect. The CNC cut Acrylic solid surface sheet to be fixed on ceiling with the help SS sling wire & squirrel system. Slings to be fastened on ceiling with the help of Hilti/ or approved fasteners. Adhesive of the same color. The rate is inclusive of framework, material and required pattern approved. The Acrylic Solid Surfaces should be installed by company authorized Quality Network Fabricators & covered under 5 years warranty by the supplier or company. Electrical and lighting accessories would be paid extra. The rate is inclusive of all operation,framework, material and required pattern approved by Engineer-in- Charge.
5
-
-
Providing and fixing false ceiling tile 15 mm thick densified tegular edge eco friendly lite weight calcium silicate false ceiling tiles fo approved texture spintone/cosmos/Hexa or equivalent of size 600 X 600 mm
50
-
-
Removing, repairing and refixing of existing false ceiling with tiles of any type by making the grid in proper line and level by adjusting existing supports, repiring or/and existing supports/ hangers/ grid members and providing new supports to match with existing ones including repairs and cleaning of metal tiles, placing the tiles in position etc complete as directed by EIC. Rate is inclusive of all labour and material required for entire levelling, repairing, cleaning work and charges for T/P.
50
-
-
Sub-Head: Polishing Work
-
-
-
Providing and Executing honing, polishing & Crystallization of Marble /Granite/ italian Floor at G/f Reception area, 6th floor area and 7th floor area and all floor (2nd to 5th) lift lobby Area which includes.
A. Honing of floor using Grits 100 to 3000 to Remove all particles and scratches from floor.
B. Scrubing of floor using Neutral floor cleaner to remove all Dirt.
C. The floor to cleaned with Taski R2.
D. Crystallization of marble with high quality Crystallization powder for floor marble. E. Buffing with buffing pad & Liquid Crystallization to be done for floor marble.
F. The above items includes all type of material, machineries, consumables; man power etc.required to carry out the job and are in the scope of contractor. Estimated Floor/ Wall Cladding Area: 1065 Sqm ≈ 1200 Sqm
8
-
-
Sub-Head: Canopy Work
-
-
-
Stainless Steel Glass Canopy:-Repairing, Supply & Installation of Canopy (Conforming to SS304 Grade, Satin Finish). Withavarious size of canopy. Structure consisting of SS304-219, 168 Tubular Sections with 75 x 75 Sections, fixing Plate, Provision for water drainage and canopy lighting, with4- Arm Stainless Steel Ozone Spider Glass fitting Arrangements with 8+1.52+8mm Thick Laminated Toughened Glass fixed with clear weather Silicon as per drawing and details. direction as per Engineer In Charge.
20
-
-
Repairing, Supply & Erection of Size 11.9mx12.5m (Actual as per site) Stainless Steel Sky Light Over Atrium as per Architecture and Structural drawings, including supply and fixing of Laminated glass of 8mm thick clear toughened glass +1.52PVB+8mm thick clear toughened glass+1.52PVB+8mm thick clear toughened glass (All odd size as per drawings) fixed with Stainless Steel Ozone 4-Arm Spider Fitting Arrangements with screw, nut and bolts. The Stricture Steel consist of all Standard and Buld up sections required for the Dome with welding complete as per drawing. The Steel Structure include all size, cutting, bending, drilling, grinding and Structure welding to required odd shape etc. direction as per Engineer In Charge.
20
-
-
Designing, Enlarging, supplying, execution, fixing and installation of stain glass mural sandwich panel in 5mm stain toughened glass panel+5 mm thick toughened clear glass facing outside. Concept of stain glass will be specially be designed keeping the company's profile in mind the art mural will enhance the ambience and would improve its look aesthetically.
Material:
The material used in making the stain glass will be lead, 5 stain toughened glass panel+5 mm thick clear toughened glass, Imported resins and staining chemicals, imported color dyes overall thickness of glass in 10mm,thw two panes will be sealed with silicon as/approved from all sides.
Framing:
Cost includes frame of aluminum powder coating which runs around the glass panel fixed to wall/RCC column.
20
-
-
Providing and fixing Glass fiber Reinforced Concrete (GFRC) screen in approved size, pattern,Design, thickness and color. The screen shouldbe made with ‘53 grade’ white Portland cement manufactured by ‘JK Cement’ or equivalent,Alkali Resistant Glass fibers manufactured by ‘OVC’ or equivalent, Quartz, fine silica sand, Super plasticizers manufactured by ‘BASF’, ‘MYK Schomburg’ or Equivalent, U.V. resistantSynthetic inorganic Pigments should be used for pigmentation manufactured by ‘Bayferrox’ orequivalent, the material casting should take place in Synthetic Rubber / FRP Mouldmanufactured by M/s Dalal Tiles or equivalent. The Fixing of Screens should be Dry Fixing i.e. to be done with Stainless Steel(SS-304) ‘L’ Shaped Clamps, dash fasteners, pins and M.S Fraiming with all accessories.
50
-
-
Sub-Head: Miscellaneous Electrical Works
-
-
-
Providing and Fixing 2000-Watt Oil Filled Radiator or Room Heater having Adjustable thermostat to maintain desired room temperature, Castor wheels with mounting plate for easy mobility, Back cover & humidifier, Power selection knob, Power: 2000 watts, Warranty: 1 years on product of approved make Morphy Richards, Havells, Bajaj or equivalent only as per direction of Engineer In-Charge.
20
-
-
Providing and Fixing Table Top Room 2000-Watt Fan Heater having Power: 2000 watts, Warranty: 1 years on product of approved make Morphy Richards, Havells, Bajaj, orpat or equivalent only as per direction of Engineer In-Charge.
20
-
-
Providing and Fixing 250mm Exhaust Fan having Power: 35 watts; Operating Voltage: 230 volts. The noise level is 44 dB and the rated frequency is 50 Hz. Material Plastic of approved make Morphy Richards, Havells, Bajaj, orpat or equivalent only as per direction of Engineer In-Charge.
45
-
-
Providing and Fixing 300mm Exhaust Fan having Fan sweep area: 300 MM ; Fan body dimension (Length x Width x Depth): 380MM x 380MM x 210MM Powder coated metallic finish, Guard: 29 Spokes, Noise level: (45 - 50) dB, Power consumption: 50 W, Rated voltage: 230 V, Rated frequency: 50 Hz, Motor type: Normal Speed, With bird guard to protect the fan in running condition; Rated Speed: 1350 revolution per minute, Warranty: 2 years on product of approved make Morphy Richards, Havells, Bajaj, orpat or equivalent only as per direction of Engineer In-Charge.
45
-
-
Providing and Fixing High Speed 400mm Wall Fan of approved make Havells, Crompton, Orpat or equivalent only as per direction of Engineer In-Charge.
60
-
-
Providing and Fixing High Speed 400mm Pedestal Fan of approved make Havells, Crompton, Orpat or equivalent only as per direction of Engineer In-Charge.
60
-
-
18W LED round Downlighter with glare-free diffuser & constant current driver complete with all accessories similar to PCGLDLX 14WPolycab Scintillate Dix Slim Led Down Light 14W of Polycab/Havels/Philips/Surya.
20
-
-
Waterproof 6 Watts LED Mirror down light complete with all accessories of Polycab/Havels/Philips/Surya or as per direction of Engineer In-Charge
20
-
-
Automatic sliding door operator - Providing and fixing of automatic sliding door Set 1 operator of DORMA (ES 200 easy) /BESMA by Assa abloy, Compliant with european standards and produced according to the guidelines for power-operated windows, doors and gates, BGR 232, the UVV and the VDE regulations. TÜV design tested, tested according to the low voltage guidelines, fulfils DIN 18650 standards. The track profile should be separate from the main profile for enabling reduction in vibration insulation.
4
-
-
Maintenance and servicing of above mentioned item viz. automatic sliding door operator including of all materials and labours all complete as per Direction Engineer In-Charge.
6
-
-
Providing and Fixing Inverter Split AC inclusive of Copper Condenser Coil, Energy Rating: 3 Star or above, Warranty: 1 year on product, 1 year on condenser, 10 years on compressor of approved make Blue Star, Whirlpool, TATA, Hitachi or as per direction of Engineer In-Charge.
-
-
-
1 Tons
5
-
-
1.5 Tons
3
-
-
2 Tons
2
-
-
Gross amount Quoted by bidder (Incl. GST)
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements