Promotion Banner

Military Engineer Services Tender

View complete overview of Delhi MES Tender

Costs

Summary

Addn/altn And Upgradation Of Various Dus, Jco And Ors Md Accn, Qtrs At Pratap Chowk, Arjan Vihar, Old And New Aps Colony, Dk-i And Ii, Rr Colony, Todapur And Uri Enclave Under Ge (central) Delhi Cantt

Description

Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

  • Tender Id

    Unregistered TenderId
  • BidAward Id

    Unregistered BidAwardId
  • Tender No

    Data for unregistered User Data for unregistered User Data for unregistered User Data for unregistered User
  • Tender Authority

    Data for unregistered User Data for unregistered User Data for unregistered User Data for unregistered User
  • Purchaser Address

    Authority for unregistered User
  • Email

    Data for unregistered User
  • Website

    wwww.unregistereduser.com

BOQ Items

ItemQuantityUnitsRateAmount
... more
Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) including removal of rubbish out side complex (MoD land), complete all as specified and directed.
357.5Cum--
... more
Demolition of cement concrete (un- reinforced) of any description and in any position not otherwise specifically provided etc including removal of rubbish out side complex (MoD land), complete all as specified and directed.
90Cum--
... more
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) including removal of rubbish outside complex ( MoD land), complete all as specified and directed.
153Cum--
... more
Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc including removal of rubbish,vegitation outside complex (MOD land), complete all as specified and directed.
33132Sqm--
... more
Taking up or down 15 mm dia GI tubing and connections including cleaning for re-fixing, complete all as specified and directed.
8428RM--
... more
All as per item 5 above but 20 mm dia
5711RM--
... more
Demolition of Brick work of stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles
216.5Cum--
... more
Taking down chowkats or frames n.exc 1.5 sqm each with shutters (without taking off shutters from frames), complete all as specified and directed.
2263Each--
... more
Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 Sqm each with shutters (without taking off shutters from frames ), complete all as specified and directed.
1846Each--
... more
Taking down shutters of any description exc.1 sq.m and n.exc 2 sq.m complete all as specified and directed.
667Per leaf--
... more
Demolition and breaking up drain pipes (salt glazed stoneware, Asbestos Cement or reinforced concrete) set in cement mortar, internal dia of pipe 100 mm, complete all as specified and directed.
615.2RM--
... more
Dismantling floor, hearth tiles incl cement mortar bedding (but not backing) removing serviceable tiles and rubbish out of premises, all as specified and directed.
5794Sqm--
... more
Dismantling boarding any description (board/plywood) fixed in any position with screw, complete all as specified and directed
4423Sqm--
... more
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, all as specified and directed.
1344.7X Sqm--
... more
Taking down existing steel rolling shutter incl hood cover pull & push type not exc 12 Sqm area of clear opening and cleaning the sides of shutters suspensions shafts,anti-guide channels and greasing all the moving parts of rolling shutters and straightening rolling shafts and replacement of bolts and nuts as required for smooth functioning of shutters and refixing the same incl hood cover complete all as specified and as directed.
35Each--
... more
Disconnecting existing water tanks, setting aside (or lowering if required) for cleaning,repairing and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes and reconnecting and refixing in position for tanks capacity exc 250 and n.exc 500 ltr complete all as specified and directed
43Each--
... more
Disconnecting existing water tanks, setting aside (or lowering if required) for cleaning,repairing and removing all scale and dirt, etc. from tanks and from mouths of circulating pipes and reconnecting and refixing in position for tanks capacity exc 500 and n.exc 1000 ltr complete all as specified and directed
26Each--
... more
Dismantling of 100 mm dia cast iron pipe (soil/waste/vent) with fittings etc fixed to walls,ceiling, on floors & from trenches if required including taking out any type of joints complete all as specified and directed.
516RM--
... more
All as per item 18 above but 75mm dia
485RM--
... more
M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished fair and even without using extra cement, complete all as specified and directed.
2549Sqm--
... more
M&L for forming construction joint 75mm deepx10mm wide filled with sealing compound Grade A complete all as specified and as directed.
41X RM--
... more
M & L for 40 mm thick cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in floors finished, surface even and smooth without using extra cement, complete all as specified and directed.
600Sqm--
... more
S & F glass dividing strips, 38mm wide and 3mm thick and inserted in position to conform to design, complete all as specified and directed.
74RM--
... more
M & L for 75 mm thick cement concrete 1:1.5:3 type B-2 (using 40mm graded stone aggregate) as in floors finished, surface even and smooth without using extra cement, complete all as specified and directed.
80Sqm--
... more
Material and labour for cement concrete 1:5:10 type E2(using 40mm graded stone aggregate) as in filling in sunken floors of toilets complete all as specified and directed.
17Cum--
... more
M&L for rendering 15mm thick in cement mortar 1:4 with two coat of tape create mixed (1:2) with cement paste @ 500 gm per sqm as per manufacturere instruction in sunken portion of toilets, finished even and smooth without using extra cement and applying a coat of hot blown bitumen 85/25 grade as the rate of 0.70 kg per sqm and applying one coat of hot blown bitumen 85/25 grade at the rate of 2.6 kg per sqm and one layer of 0.5mm thick fibre tissue over it and finally third layer of hot blown bitumen 85/25 grade at the rate of 2kg per sqm including getting out, complete all as specified. Note : WPC shall be paid separately.
210Sqm--
... more
S&F 15mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors, shall be painted with bituminous paint of approved quality,The pipes should not come in contact with lime mortar or lime concrete as pipes are affected by lime etc complete, all as specified and directed.
8783RM--
... more
All as per item 27 above but 20 mm dia.
5508RM--
... more
Refixing 15 mm bore medium grade GI tubing with all fittings fixed to wall and ceiling or laid in floors complete all as specified and directed.
300RM --
... more
All as per item 29 above but 20 mm dia GI tubing.
270RM --
... more
S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 110mm mm dia ,in four storey building complete all as specified.
856RM--
... more
S&F in repairs PVC (SWR) pipes double socket in any length with rubber ring joints, fixed to walls 75mm mm dia ,in four storey building complete all as specified.
740RM--
... more
S&F in repairs PVC (SWR) bends of any radius ( 110mm bore) including jointing with solvent cement complete all as specified.
179Each--
... more
S&F in repairs PVC (SWR) junction double,(double T, 110 mm bore), equal or unequal , including jointing with solvent cement complete all as specified and directed.
60Each--
... more
S&F in repairs PVC (SWR) junction double,(double T , 75 mm bore ), equal or unequal complete, including jointing with solvent cement.
224Each--
... more
S&F in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement.
156Each--
... more
S&F in repairs PVC (SWR) vent cowl of 110 mm bore
93Each--
... more
S&F in repairs PVC (SWR) vent cowl of 75 mm bore
120Each--
... more
S&F in repair pvc floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified and directed.
332Each--
... more
S&F in repair Salt Glazed Stone Ware (SGSW) gully traps square or round mouthed type size 150x150mm including excavation/earth work, bed concrete, surrounding concrete and CI grating, complete all as specified and directed.
60Each--
... more
S&F in repair brass chromium plated tubuler towel rail 20mm dia D type ISI marked 60cm long between flanges including a pair of CP brass brackets, complete all as specified and directed.
250Each--
... more
S&F in repairs bib tap with crutch or butterfly handle, screwed down, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy, chromium plated long body with flange complete all as specified and directed.
884Each--
... more
Supply and fix in repairs chromium plated brass angle valve suitable for 15mm bore pipe, complete all as specified and directed.
1100Each--
... more
Supply and fix in repair chromium plated brass angle valve dual type suitable for 15mm bore pipe, complete all as specified and directed.
242Each--
... more
S&F in repair 15mm dia chromium plated wall mixer hot & cold L bend 3 IN 1 pattern fixing and connection to pipes complete all as directed.
220Each--
... more
S&F in repair 15mm dia brass chromium plated mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB including taking out existing mixer from old WHB, complete all as specified and directed
220Each--
... more
S&F in repair 15mm dia brass chromium plated Sink mixer for mixing hot and cold water screwed down for iron pipe and fixed to Kitchen sink including taking out existing mixer , complete all as specified and directed.
134Each--
... more
S&F in repairs CP Brass shower rose 100 mm size suitable for 15mm bore pipe complete all as specified and directed.
130Each--
... more
S & F in repair Stop Valve 20mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as specified and directed.
76Each--
... more
S & F in repair Stop Valve 15mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as specified and directed
94Each--
... more
S&F in repair stop valve 15mm dia fancy type chromium plated with long shank and cap (concealed type) complete all as specified and directed.
244Each--
... more
S & F in repair health faucets with crutch or push handle, screwed down with 1.5mtr PVS flexible pipe, screwed for iron pipe, 15mm dia, fancy type, cast copper alloy. Chromium plated long body complete all as speciifed and directed
236Each--
... more
S&F health jet fixed in EWC, screwed down with ,15mm dia, fancy type cast copper alloy, chromium plated CP flexible pipe of suitable length,, complete all as specified and directed.
60Each--
... more
S&F in repair standard of PTMT bib tap, fancy type with flange, 15 mm dia screwed for iron pipe or for brass ferrule complete all as specified and directed.
172Each--
... more
S & F in repairs glass corner 300 mm radius of 10mm thick toughned glass with CP Brass railng, fixed with screws fancy type, complete all as specified and directed.
216Each--
... more
S & Fixed in repair PVC mirror cabinet made of high intensity polythene of biggar size 500 x 400 x 120 mm complete all as specified and directed
92Each--
... more
S&F CP connection pipe of 15mmx 450mm with CP check nuts with washers, complete all as specifiedn and directed.
748Each--
... more
S&F in repair vitreous China coloured European type WC (single piece)including connection to drain,'S' trap and fixing bolts ,plastic water closet seat cover complete all as specified and directed.
194Each--
... more
S&F in repair 10 ltrs capacity PVC colour low level flushing cistern with PVC flush pipe 32mm dia complete all as specified and directed.
258Each--
... more
S&F in repair vitreous chinaware coloured oval shape wash hand basin (WHB) size 550mm x 400mm complete, Ist quality, including provision of pair of mild steel angle iron brackets of suitable size duly painted and cutting for and pinning in ends of brackets in walls & making good & including providing and fixing of suitable waste pipe and waste fitting complete all as specified and directed.
66Each--
... more
S&F in repair vitreous china squatting pan of orrissa pattern, of size 580x440 mm , 1st quality, long pan white with "p"or "S" trap front or back inlet and integral footrest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified and directed
272Each--
... more
S&F in repair brass chromium plated toilet paper holder, complete all as specified and directed.
194Each--
... more
S&F stainless steel gratings 100mm bore size fixed with cement motar complete all as specified and directed.
956Each--
... more
S&F in repair brass chromium plated soap dish, complete all as specified and directed.
360Each--
... more
S & F in repairs brass chromium plated towel rack 600 mm x 300mm size including a pair of CP brass bracket complete all as specified and directed.
312Each--
... more
S&F in repair tie hanger 250mm long, stainless steel body complete all as specified and directed..
258Each--
... more
S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe including connecting union overall size 1145mm x 510mm x 200mm with bowl size 510mm x 400mm x 200 mm including taking out existing china ware sink with waste fittings complete all as specified and directed.
122Each--
... more
S&F in repairs Stainless Steel plate rack (Gde-304)of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plate rack, complete all as specified and directed.
204Each--
... more
S&F in repair stainless steel peg set of 06 peg, 45 centimeter long, complete all as specified and directed..
586Each--
... more
S & F in repairs 900mmx600mm bevelled edge looking mirror of selected quality glass,fency type with 100 mm border fixed to four Nos stainless steel brackets with stainless steel screws and cup washers
194Each--
... more
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with brass chromium plated bracket guard and railing 60cm long
242Each--
... more
M&L for brick work with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls with old size bricks, built in cement mortar 1:4, complete all as specified and directed..
873Sqm--
... more
M&L for brick work with sub class 'B' brick straight or curved on plan exc 6 metre mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and directed..
308.5Cum--
... more
Cutting holes in brick wall built in cement mortar for inserting hold fasts, depth of embedded postion of hold fast /lugs measured from the face the jambs into the wall exc half brick but n.exc one brick thick and making good the dismantaled portion in cement mortar 1:3 or in cement concrete 1:2:4 type B-1, using 20mm graded stone agg complete all as specified upto six storey height.
970Each--
... more
S&F mild steel work as in hold fast 25x3mm flat iron and similar articles conforming to Fe-410-0, complete all as specified.
216Kg--
... more
M&L precast reinforced cement concrete 1:1.5:3 type B-1 (using 20mm graded stone aggregate) as in shelves, Manhole cover landings, cover slabs, chullah hoods, chajjas, water trough and similar articles including form works , set in cement mortar 1:4, complete all as specified (reinforcement to be measured & paid separately).
20Cum--
... more
S & F factory made solid PVC wire gauged door shutter 35mm (styles) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded prelaminated PVC C channel having a prelam PVC sheet strip of 20mm with stuck inside with solvent cement for stiles and prelam PVC sheet for top, lock and bottom rail on either side and as gap insert for top rail and bottom rail. The wire gauge shall be stainless steel alloy wire cloth 0.36mm nominal dia of wire and average aparature 1mm, wrapped on an additional square 8mm MS solid tube and this tube shalll be welded to MS tube and wire gauge shall be stretched to tighten firmly complete all as specified and directed.
135Sqm--
... more
S & F factory made solid PVC moulded door shutter 35mm thick (styles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm thick prelam PVC sheet on back face complete all as specified and directed.
142Sqm--
... more
S&F fibre glass Reinforced Plastiic (FRP)door frame shall be three legged of cross section 90mmx45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate door frame moulded with fire retardant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be coverec with fibre glass from all sides . MS stay shal be provided at the bottom to steady the frame complete all as specified and directed..
162.5RM--
... more
S&F FRP Door shutter shall 30mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacturer . Made with retardant grade unsaturated Poyester resin moulded to 3mm thick FRP laminate for forming hollow rails and styles with wooden frame and suitble blocks of seasoned wood inside at required places for fixing of fittings , cast monolithically with 5mm thick FRP panels and confirming to IS 14856-2000.complete all as specified
810.4Sqm--
... more
M&L Solid PVC double door frame (Factory made) of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with MS tube, Supplying & Fixing in opening complete all as per specifications and as per drawing on Sl page No 150 of SSR (Part -II).
107RM--
... more
M&L for 2nd class hardwood plain, solid straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints, complete all as specified and directed..
7.25Cum--
... more
M&L for 2nd class hardwood plain fillets, square , rectangular or triangular in section, wrought, sectional area exc 13 Sq.cm and n.exc 25sq.cm fixed with screws completre all as specified and directed.
200RM--
... more
M&L for 35 mm thick 2nd class hard wood glazed and skelton door shutter, factory made, open rebated and prepared to receive glass/guage etc. (without sash bar) edge of frames plain, chamfered or rounded, fitted with cut & mitred beads for securing glass/guage etc size of member as specified in SSR Part I Section 8 clause 20(a) and fixed to chowkat, complete all as specified and directed..
1365Sqm--
... more
S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, commercial type on both sides. Flush shutters shall have teak wood edging as specified.
732.54Sqm--
... more
S&F 35mm thick 2nd class Hard wood rail & style (factory made) plain, framed, panelled shutter (two panel) with lock rail & panel of 12mm veneered particle board with commercial veneering on both sides. The size of rail & style as per IS :1003 (Part I), Kiln seasoned & chemicals pressure treated, complete all as specified and directed..
1885.18Sqm--
... more
S&F 2nd class hardwood small fittings such as brackets of any type, latch and hinge blocks, shaped door(Hollock) and window stop and the like, including all necessary labour, article n.exc 200 cu cm each wrought, complete all as specified and directed.
90Each--
... more
Supply only 50 mm long (size) butt hinges medium weight, cold rolled, mild steel, complete all as specified and directed.
130Each--
... more
S&F 100 mm long (size) butt hinges, stainless steel with brass/bronze hinge pin, complete all as specified and directed.
5764Each--
... more
S&F in repairs stainless steel handle of size 200mm size long complete all as specified and directed.
198Each--
... more
S&F stainless steel handle of size 200mm size long complete all as specified and directed.
790Each--
... more
S&F stainless steel handle of size 150mm size long complete all as specified and directed.
410Each--
... more
S&F stainless steel handle of size 200mm size long complete all as specified and directed.
340Each--
... more
S & F in repairs 150mm size double action spring, hinge, mild steel with steel wire spring, stove enamelled black, complete all as specified and directed..
112Each--
... more
S & F in repair 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed.
170Each--
... more
S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed.
178Each--
... more
S&F in repairs stainless steel of AISI-316 grade barrel tower bolt 200 mm long, extruded section, complete all as specified and directed.
184Each--
... more
S&F stainless steel of AISI 316 grade barrel tower bolt 200 mm long , extruded sections complete all as specified and directed.
1005Each--
... more
S&F stainless steel of AISI 316 grade barrel tower bolt 150 mm long , extruded sections complete all as specified and directed.
38Each--
... more
S&F in repairs stainless steel of AISI 316 grade floor door stopper with hard drawn steel spring 140mm long complete all as specifiedand directed.
40Each--
... more
S&F stainless steel of AISI 316 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed.
83Each--
... more
M&L for cement concrete 1:2:4 type B1(using 20mm graded stone aggregate) as in blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces, complete all as specified upto two storey height.
14.55Cum--
... more
S&F Hasp and staple, 100mm size, safety type, aluminium anodised brass hinge pin including bolt to hinge plate & fixed with screws, complete all as specified and directed.
572Each--
... more
S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified and directed..
3357RM--
... more
Supply and fix 40mm dia, cup board knobs fixed with nuts, screw and washer of brass polished , complete all as specified and directed..
1777Each--
... more
S&F ball catches with 8mm dia steel ball and brass body and striking plate including letting in and fixed, complete all as specified and directed..
1724Each--
... more
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with steel wire staples, complete all as specified and directed.
1941Sqm--
... more
S&F 4 mm thick plain sheet glass and glazing , in square n.exc 0.5 Sqm in each pane, complete all as specified and directed..
1042Sqm--
... more
S&F 5.5mm thick sheet glass ordinary quality in square n.exc 0.50 sqm each including grinding of edges for crockery cupboard including taking out old/broken glass with roller, complete all as specified and directed..
385Sqm--
... more
S&F in repair double aluminium channel size 10x20x2mm, complete all as specified and directed.
249RM--
... more
S&F MS roller with "C" shape stapple, chromium plated for 5.50mm thick sheet glass, complete all as specified and directed..
335Each--
... more
S&F mild steel 300mm ordinary rat tail, rod pattern, springs including roller and roller plate complete all as specified and directed.
680Each--
... more
S&F brass chromium plated magic eye complete all as specified and directed.
154Each--
... more
M & L cutting out bricks ,forming toothingwork including value of new materials enterig old walls and jointig and pointing in cement mortar 1:4 (meassured on verticle surface in contact with old wall only).
120Sqm--
... more
S & F in repairs stainless steel of AISI 316 grade 100 mm size mortice lock vertical type, 4 levers with key in duplicate,incl 2 no suitable handle fixed to shutters with screws,complete all as specified and directed.
124Each--
... more
M&L for Easing of door shutters for easy closing/opening, tightening of hinges or changing the position of hinges adjustment of tower bolts/sliding bolts etc area exc 1sqm but n.exc 2 Sqm each, complete all as specified and directed.
439Per Leaf--
... more
M&L for 15 mm thick internal rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement, complete all as specified and directed..
14316Sqm--
... more
M & L for 15mm thick external rendering in cement mortar 1:4 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement and mixed with water proofing compound, making good by existing colouring complete all as specified and directed.( (Water proofing compound shall be measured and paid separately)
14728Sqm--
... more
Supply only integral water proofing admixture of approved quality.
220Ltr--
... more
M & L for 5 mm thick rendering in cement mortar 1:3 ceiling, surface finished even and smooth without using extra cement, complete all as specified and directed.
2500Sqm--
... more
M & L for 10 mm thick rendering in cement mortar 1:3 with WPC on concrete surfaces of chajja and like surface finished even and smooth without using extra cement, complete all as specified and directed.
1616Sqm--
... more
M&L form work to chajja, weather shade, troughs and similar items including edges for rough finished surfaces of concrete flat, complete all as specified and directed.
210Sqm--
... more
M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor, roof and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n.exc 10 cm wide for rough finished surfaces of concrete, complete all as specified and directed.
572RM--
... more
S & F in repair MS framed work such as grills, gratings etc with ends of bars shouldered and or riveted, framed guard bars, barred iron doors, ladders, frame work of water trough, railings,cooler stand and similar work to conforming to Fe -290,Gde-E-165 ,complete all as specified upto 2 storey height.
35940Kg--
... more
Supply and fix in repair TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) , not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified and directed.
10349Kg--
... more
M&L for Preparation of old decorated surfaces(Plastered or unplastered) of wall including cornices, pillasters applying two coats of white lime washing, complete all as specified and directed.
11720Sqm--
... more
M&L for Preparation of old decorated surfaces(Plastered or unplastered) of ceiling including cornices, pillasters etc and applying two coats of white lime washing, complete all as specified and directed.
9475Sqm--
... more
Complelte removal of existing old treatment on surface from walls with machenical grinder (machine) as per specification of manufacturer of pains/OBDs, complete all as specified and directed.
17780Sqm--
... more
M& L a coat of alkali resistant primer over alread prepred surface of walls complete all as specified and directed.( Item is executed in stage and passed.)
25660Sqm--
... more
M& L for preparing the entire surface with applying 2-3 mm thick wall care putty on walls surface finished even and smooth complete all as specified and directed.Putty to be procured directly from manufacture. (Item is executed in stage and passed.)
34280Sqm--
... more
M& L for applying two coats of oil bound distemper on wall surface with roller brush complete all as specified and directed. ( Item is executed in stage and passed.)
31780Sqm--
... more
M&L for Preparation of old painted surfaces of steel and iron surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint, complete all as specified..
2025Sqm--
... more
M&L for Preparation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described, and applying one coat of synthetic enamel paint, complete all as specified.
3940Sqm--
... more
M&L for Preparation of new surfaces (Plastered or un-plastered) on ceiling and applying three coats of white lime wash, complete all as specified.
5515Sqm--
... more
M&L for Preparation of new surfaces (Plastered or un-plastered) on wall and applying three coats of white lime wash, complete all as specified.
167Sqm--
... more
M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper(white or tinted) over a coat of 3mm thick wall care putty on plastered surfaces, complete all as specified and directed.
300Sqm--
... more
M&L for Preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described over 10cm width girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
7593Sqm--
... more
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
4275Sqm--
... more
Preparing surfaces of wood and wood based materials steel and iron work , new or old , treating small articles such as stop ,covers,gully gratings ,hold fasts,ends of posts, back of chowkats etc area not exceeding 0.10sqm each treated with tar or coal tar black paint
6Per 100 Nos--
... more
M&L for Preparation surface of wood or wood based materials, new or old of any description and girth and treating with two coats creosote to back of ply wood, complete all as specified and directed..
22Sqm--
... more
Excavation in trenches n exc 1.5m wide and n exc 1.50m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.
734CUM--
... more
Material and labour for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in bedding to drain pipe 150 mm dia including packing under, and haunching against the sides of the pipes after they are laid and tested including form work to sides of concrete complete all as specified and directed.
532RM--
... more
M&L for Reinforced concrete pipes class NP2,laid and joint complete with collar drain pipes 150 mm laid in trenches and jointed as specified and directed.
300RM --
... more
Returning filling in, incl spreading levelling watering and well ramming in layers n exc 25cm (after the pipes have been laid and tested) in soft/loose soil complete all as specified and directed.
496.5Cum--
... more
Removing excavated materials to a distance exc 1.50 Km but not exc 5 Km outside defence land and depositing where directed.
832.46Cum--
... more
Cement concrete 1:3:6 type C-2(40mm aggregate ) as in foundation manholes complete all as specified directed by Engr-in-Charge.
16.98Cum--
... more
Cement concrete 1:2:4 type B-2 (40 mm graded aggrigate ) as in surface channels and drains.
27.16Cum--
... more
Cutting into existing manholes for connecting new drain, making good to pipe and rendering, cutting out existing benching and forming branch channel (half round or ¾ section) in cement concrete 1:2:4 type B-1, smooth finished and re-forming benching as required for 100mm dia pipe, complete all as specified and directed. .
5Each Pipe--
... more
M&L for rectified coloured ceramic tiles 300x600 x 7 to 8mm thick, as in vertical surfaces of wall as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 all as directed.
12854Sqm--
... more
M&L for rectified coloured ceramic tile 300x300x6-8 mm thick as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement over 15mm thick screed bed in CM 1:6 complete all as directed.
4259Sqm--
... more
M&L for polished Vitrified tile double charged, 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.
6850sqm--
... more
Ditto all as per item No 151 above but over 10mm thick rendering in CM 1:4 as in skirting all as directed.
601.85Sqm--
... more
S&F 6mm thick plywood with 5Nos of ply, grade BWR, type BB, fixed with screws to timber frame work etc, complete all as specified and directed.
21Sqm--
... more
M&L 18/19mm thick block board core grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber frame work as in cupboard shutter, loft shutter incl 15 mm thick teak wood leaping and neccesarry rebating for leaf shutters where reqdincluding polishing to leaping /rebating complete all as specified.
1650Sqm--
... more
S&F PVC 18/19mm thick PVC moulded solid board, one side prelaminated for cabinet boxes,shutters etc. with shelf and shutters full size fitted under /above kitchen cooking platform and other platform complete all as direction of the Engr-in-Charge and the manufacturers specifications and drawings
2546Sqm--
... more
S&F factory made PVC kitchen and cupboard frame of the size 75mmx40mm with a wall thickness of 4mm, made out of extruded 4mm thick prelam PVC sheet reinforced with 15mmx15mm MS tube of 19 gauge thickness througout the fame and mitre cut at two corners and jointed with 2 Nos of 150mm long brackets of 10mmx10mm MS tubes.The door frame shall be fixed to the wall using 65/100mm long MS screw through the frame by using PVC fastners . A minimum of 4 Nos. of screws to be provided for each vertical member and minimim 2 Nos for Horizontal members Complete all as per manufacturers specifications and as directed.
1610RM--
... more
S & F in repair stainless steel drapery Rod 25mm dia make and model of vista, including wooden side caps, brackets, and rings @ 120mm c to c, complete all asspecified and approved by the Sample of Chief Office.
5483RM--
... more
Providing and injecting chemical emulsion for post construction anti-termite treatment along the external wall below concrete or masonary apron using chemical emulsion 2.25 litres per RM including drilling and plugging holes etc in apron with Cement mortar 1:2 to match the existing apron, complete all as specified.
2525RM--
... more
Providing and injecting chemical emulsion for post construction anti termite treatment in walls & Floors at point of contract or wood work by chemical emulsion (in oil or kerosene based solution) 0.5 ltrs/hole by drilling 6 mm dia holes at a downward angle at 45 degree at 150 mm centre to centre sealing the same, complete all as specified.
1400RM--
... more
M&L for chipping out spilled and loose concrete cover and derusting steel reinforement of concrete column, beam, slab, chajjas, parapets and the like as directed upto 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforecement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part of gaggar sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guiniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out upto 10 metre height) complete as directed at site. Note :- (a) After placing the additional reinforecement all concrete surfaces shall be throughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guiniting is done with polycrete admixture @ 2% by weight of cement all as per manufacturers instructions (polycrete admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account. (d) E2 design Approval by Chief Offfice.
3880Sqm--
... more
M & L Cement concrete 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in roof kerbs or mud stops etc including weathering slightly rounded or chamfered edges, finished even and smooth without using extra cement including form work , complete all as specified.
159Cum--
... more
M&L for 16 to 18mm thick machine cut uniform tecture Udaipur green stone flooring over 20mm thick screed bed in cm 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing, laid in designed complete all as specified.
900Sqm--
... more
M&L for 16 to 18mm thick uniform tecture Udaipur dark green marble laid over15mm thick screed bed in cm 1:6 as in treads of steps in one piece including cutting, jointing, moulding and granite polishing, laid in designed complete all as specified.
292Sqm--
... more
M&L for one coat of plastic emulson paint including preparation of old painted surfaces of brick/stone/concrete surfaces complete all as specified.
600Sqm--
... more
Providing and fixing factory made UPVC any colour window/ventilator (louvers type) area n exc 1.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, Frame (60mm x 58mm), T Profile ( One vertical length in between two shutters) (60mm x 74mm).Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (28mm x 21.5) , sash (31mm x 27.5mm), T Profle (27mm x 17mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasterners & 5mm thick glazing with selected quality glass . Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.
239Sqm--
... more
Providing and fixing factory made uPVC any colour casement (Double rebated) window area exc 1.00 sqm but n exc 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, Frame (110mm x 38mm), Glass Sash (60mm x 78mm) another mesh sash (50mm x 77mm),T Profile ( One vertical length in between two shutters) (60mm x 74mm).Glazing bead (35mm x 20mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (26mm x 10mm) , sash (31mm x 27.5mm), T Profle (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware (Casement handle made of zinc alloyed (any colour powder coated), transmission gear made of mild steel with multi point locking system ) and 5mm thick glazing with selected quality glass and Stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.
738Sqm--
... more
Providing and fixing factory made uPVC any colour sliding window Three track of area n exc. 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, Frame (88mm x 52mm), Sliding sash (42mm x 67mm), Sliding mesh sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm).Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (30mm x 18) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware (Touch lock of zinc alloyed (any colour powder coated), steel roller system, Stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories). Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.
425Sqm--
... more
S&F 4mm thick pin headed glass panes used in anodised aluminium glazed/gauzed windows and ventilators shutters complete all as specified
14Sqm--
... more
S&F Ball valves 20mm bore high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 15mm-142 gms/ 20mm-210 gms/25mm-455gms/ 40mm- 690 gms)
68Each--
... more
M&L for Black Granite slab 20 mm thick rubbed and polished machine cut, set in cement mortar jointed with white cement complete including bedding layer 15mm thick in cement mortar 1:6 over cooking platform & making hole for gas pipe etc through precast RCC slab & granite stone etc incl rounding of exposed edges, complete all as specified.Note:- Colour of Granite approved by the direction of Garrison Engineer.
950.12Sqm--
... more
S&F in replacement steel rolling shutters ,1.25mm thickness of laths,without ball bearing, as specified including top cover, anchoring rod, hasp and staple, and one shop coat of primer, erected in positionas indicated, complete push pull or manual type complete all as specified and as directed.
30Sqm--
... more
S&F in replacement steel rolling shutters ,1.25mm thickness of laths,without ball bearing, as specified including top cover, anchoring rod, hasp and staple, and one shop coat of primer, erected in positionas indicated, complete gear operated type with bevel gear box and crank handle all as specified and as directed.
10Sqm--
... more
S&F in repairs mild steel hood covers exc 6m but n.exc 12 Sqm for rolling shutter made out of mild steel sheets 1.00mm thick incl bending the sheet to the required shape and fixing the same in the rolling shutters bracket plate incl one coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge
40Sqm--
... more
S & F in repairs roller ball bearing (ISI marked) for 50/40 mm dia pipe shaft complete all as specified and as directed by Engineer-in-charge.
25Each--
... more
S& F in repairs mild steel lock plate & handles made of of Flat iron 35 X 5 mm incl welding and painting with two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engineer-in-Charge.
20Each--
... more
S & F in repairs mild steel helical wire springs (confirming) as to IS-6248-1970) for shutters not exc 12 Sqm of approved make complete all as specified.
25Each--
... more
S & F in repairs 3.15mm thick mild steel bracket plate hexagonal or circular in shape incl welding complete all as specified and directed by Engineer-in-charge.
25Each--
... more
S & F in repairs MS Black pipe 40mm dia medium grade for rolling shutters shaft incl drilling holes for fixing springs and welding to MS brackets plate compelete all as directed by Engineer-in-charge (Note MS brackets plates shall be measured and paid for separately).
37RM--
... more
S & F in repairs mild steel pully for 32 mm/40mm dia pipe for rolling shutters complete all as directed by Engineer-in-charge.
40Each--
... more
S&F in repairs mild steel clips (Local name Chidiya) made out of 1.00mm thick MS sheet and revetting the same to the existing steel lath of shutters complete all as specified
30Each--
... more
S&F in repairs if inter locking lath section formed from rolled MS strip 1,2mm thick for rolling shutters above 3.5m width complete all as specified and as directed.
44Sqm--
... more
S & Fin repair 1000 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I
77Each--
... more
S & F in repair 500 ltr capacity three layer white colour rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including dismantling old water tank all as specified in SSR Part I I
152Each--
... more
S&F steel windows including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60 mm double rebated with side hung shutter both glaze,gauge and guard bars of 12mm square bars placed horizontally/vertically @ 125mm C/C ,including box type hinges steel handless and peg stay ,tower bolts and including glaze/gauge and guard bars dovetailed or welded ,incl one shop coat of red oxide primer ( wire gause and glass pan shall be measured seperately ). Incl M&L for providing PCC 1:2:4 (12.5mm graded stone aggregate) to fill the frame and making good complete all as specified and directed by Engineer in Charge .
414Sqm--
... more
M& L in repairs Providing precast cement concrete type B-0 1:2:4 set in cement mortar 1:4 (12.5mm graded aggregate) louvres and jallies, 40 mm thick (mea sured solid), including all moulding complete all as specified & directed.
424Sqm--
... more
S & F in repair (Fe 410-W(Gde-E250)quality-A) Framed work as in Doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing and painting complete.
890Kg--
... more
M & L Machine pressed precast concrete interlocking paver block with gray cement and no pigment any shape and size confirming to IS 15658-2006 of 80mm thickness M-40 Grade complete all as specified
1663.04Sqm--
... more
M & L sand filling under floors or in foundations including watering and consolidation.
59.2Cum--
... more
S&F in repairs PVC (SWR) bends of any radius ( 75mm bore) including jointing with solvent cement complete all as specified Make prince
612Each--
... more
S & F Pre-painted galvalume aluminum Zinc coating GI based Corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
970Sqm--
... more
M&L for roof treatment as per the description below:- a) Plain cement concrete average 50 mm thick 1:2:4 type B0 (using 12.5 mm graded stone aggrigate )for levelling course for providing slope in the roof @ 1:40 gradient b) Apply bituminous primer @ 0.3 ltr/Sqm (conforming to IS-3384) on prepared surfaces. After drying of primer apply a coat of hot blown 85/25 grade bitumen conforming to (IS-702 @ 1.20 kg/Sqm of prepared surfaces. c) Laying APP modified five layered membrane 3 mm thick and weighing not less than 4 Kg/Sqm with centre core 160 GSM/ Sqm ; core reinforced and laid with 75 mm side overlap and 150 mm end lap. The membrane shall be laid with LPG torch application and overlaps sealed and finished neatly as per the manufacturer specification And apply two coat of silver aluminum paint .
5050Sqm--
... more
S&F Modular Kitchen trolly/Basket cupboard and cabinate Confirming to Stainless steel of AE - SI grade 504 as per size required for complete all as specified.
380Kg--
... more
M&L for telescopy channels 22" long fixed in cupboard complete all as specified and as direct by Engineer in charge.
240Each--
... more
Demolition of reinforced cement concrete such as chajja,manhole cover parapet wall ,lintel up to 4.5 m span including hieght upto four storey building , in any position all as specified and as directed by Engineer -in-Charge.
21Cum--
... more
M&L cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in foundation filling and mass concrete , complete all as specified.
34Cum--
... more
M&L for 5mm thick rendering in cement mortar 1:3 finished even and smoothe surface without using extra cement on ceiling, chajja in multy storey building etc complete all as specified.
2088Sqm--
... more
M&L for preparation of newly plastered surfaces of wall and applying 2-3 mm thick birla wall care putty and apply two coat oil bond distemper over one coat of primer from the same manufacture complete all as specified and directed.
4200Sqm--
... more
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete.
650Sqm--
... more
Complete removal exising old surfaces of wall / ceilling by scrubbing with hard brushing ,brooming down or steel wire brushing scraping down smook root mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water applying 2-3 mm birla wall care putty Two coats of weather proofing exterior acrylic emulsion paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.
2200Sqm--
... more
M&L for 6 mm thick teak wood leaping all around for 19/20 mm shutter including polishing painting fixed withfevicol, headless screws complete all as specified.
902RM--
... more
S&F 100mm dia stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stay including boltstand nuts seuring ends of stays to wall complete all as .
490Each--
... more
S&F stainless steel of AISI 316 grade barrel tower bolt 150 mm long , extruded sections complete all as specified and directed.
180Each--
... more
S&F stainless steel of AISI 316 grade barrel tower bolt 200 mm long , extruded sections complete all as specified and directed.
670Each--
... more
S&F in repairs stainless steel of AISI-316 grade barrel tower bolt 200 mm long, extruded section, complete all as specified and directed.
110Each--
... more
S&F stainless steel handle of size 150mm size long complete all as specified and directed.
1005Each--
... more
S&F stainless steel handle of size 200mm size long complete all as specified and directed.
450Each--
... more
S&F in repairs stainless steel handle of size 200mm size long complete all as specified and directed.
124Each--
... more
S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed.
72Each--
... more
S & F in repair 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed.
110Each--
... more
S&F 100 mm long (size) butt hinges, stainless steel with brass/bronze hinge pin, complete all as specified and directed.
1345Each--
... more
S&F brass chromium plated magic eye complete all as specified.
36Each--
... more
S & F in repairs looking mirror of size 600mm x450mm x5.5mm thick with aluminium frame selected quality mounted on 6mm thick commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers.
256Each--
... more
Supply and fix in repairs sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs, washers and waste including bedding in cement mortar to dwarf wall or including fixing cantilever, brackets and connecting union to pipe over all size 1020 mm X 510 mm, bowl size 460 mm X 360 mm X 160 mm.
256Each--
... more
Material and labour for welding in repairs not exc 2.5 cm in length complete all as directed.
134Each--
... more
Cuttting chases for concealed water tubing or concealed conduct wiring etc and making good cutting exc 10 cm not exc 20 cm grith in brick wall.
4750RM--
... more
Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified.
172Each--
... more
S & F in repair Stop Valve 20mm dia cast copper alloy, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as specified.
70Each--
... more
S&F in repair PVC connection 15mm dia and 60 cms long with two nos of brass nuts and washers complete .
840Each--
... more
Supply and fix in repairs 15 mm dia pillar taps, fancy type brass with capstan head chromium plated screwed down high pressure with or without lettered “hot/cold” with long screwed shank and flynut screwed complete all as specified.
158Each--
... more
M&L for prepared new surfaces of wall and applying two coats of cement paint over a coat of primer same manufacture, complete all as specified and directed by Engr-in-Charge.
8700Sqm--
... more
M&L cement concrete 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in base of 25 mm thick, finished surface without using extra cement, complete all as specified.complete all as specified.
3415Sqm--
... more
M&L for rectified coloured ceramic tiles (square/ rectangular) 7 to 8 mm thick, area of each tile exc .18 sqm but n exc .38 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed in cement and sand mortar 1:6 complete all as specified.complete all as specified and directed.
5035Sqm--
... more
All as per item no 222 including 10 mm thick plaster on vertical surface/skirting on wall in cement and sand mortar 1:4, complete all as specified.complete all as specified and directed.
770Sqm--
... more
M & L for 20-25 mm thick Machine cut kota single piece stone slab for steps or flooring 3nos of grooves at end laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 15mm thick screed bed in CM 1:6 complete as specified and directed.
1268Sqm--
... more
M&L for Kota stone slab 16-18mm thick in riser of steps, skirting, dado and pillar laid over cement screed 15mm thick (1:4) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr in Charge.
565Sqm--
... more
M&L for Reinforced cement concrete Type M-20 using 20 mm graded stone aggregate in shelves & similar items complete all as specified and as directed by Engineer-in-Charge.
24.6Cum--
... more
Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.
477Sqm--
... more
S&F in repair 75 mm dia (bore of pipe) cast iron (sand cast) soil, waste, vent pipe in any length with or without ears with cement joint fixed to walls, complete all as specified.
1222RM--
... more
All as per item 228 above but 100 mm dia.
1060RM--
... more
S&F 100mm dia (bore of pipe) cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified.
236Each--
... more
All as per item 230 but 75mm dia (bore of pipe) bends
160Each--
... more
All as per item 230 above but fitted with oval access door for 100mm dia (bore of pipe).
96Each--
... more
All as per item 230 above but fitted with oval access door for 75 mm dia (bore of pipe)
93Each--
... more
S&F 32mm bore brass chromium plated bottle traps for wash basins for pipe or connections incl necessary packing union and cap and fixed.
36Each--
... more
M&L for 18/19mm thick prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminationwith BWR type adhesive, fixed with screws to timber frame work as in cup board shutter, loft shutters incl 6 mm thick teak wood lipping and necessary rebating for leaf shutters where required including polishing to lipping/rebating complete all as specified.
1490Sqm--
... more
S&F Steel work in tubular trusses or frame, including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, Note :- frame provide over chhajja upto four storey building using scaffolding .
5304Kg--
... more
M&L for rendering 15mm thick in cement mortar 1:4 with two coat of tape create mixed (1:2) with cement paste @ 500 gm per sqm as per manufacturere instruction in sunken portion of toilets, finished even and smooth without using extra cement and applying a coat of hot blown bitumen 85/25 grade as the rate of 0.70 kg per sqm and applying one coat of hot blown bitumen 85/25 grade at the rate of 2.6 kg per sqm and one layer of 0.5mm thick fibre tissue over it and finally third layer of hot blown bitumen 85/25 grade at the rate of 2kg per sqm including getting out, complete all as specifed.
120Sqm--
... more
S&F Powder coated (50 micron thick), aluminium glazed/gauzed windows shutters, side hung type with 2 Nos teliscopic hinge without sash bar aluminium section weighing 0.55 kg per mtr including necessary jointing cleats glazing clips rubber packing anodised aluminium beading screws including fittings such as peg stages 150mm long, long 2 Nos towr bolt 100mm long and 1 No aluminium handle 100mm long etc in each shutter complete all as specified.
582Sqm--
... more
S&F Powder coated (50 micron thick) aluminium glazed/gauzed ventilators shutters fixed type without sash bar aluminium section weighing 0.55 kg per mtr including necessary jointing cleats glazing clips rubber packing anodised aluminium beading screws including fittings such as no peg stages 150mm long, 2 Nos aluminium hings 75mm long 2 Nos towr bolt 100mm long and 1 No aluminium hangle 100mm long etc in each shutter complete all as specified.
165Sqm--
... more
S&F Powder coated (50 micron thick,) aluminium frame for windows/ventilators with one or more rebats incl grills, jointing cleats for fixing etc complete all as specified
6455Kg--
... more
S&F sheet glass selected qualities 5.5mm thick for aluminium windows in sqm n exc 0.5sqm each pane complete all as specified.
383Sqm--
... more
Surface excavation in soft soil n exc 30 cm deep and averaging 20 cm deep and getting out all as specified.
663.04Sqm--
... more
M&L for joint less Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including provn of 15mm thick screed bed or bedding layer in CM 1:6 etc complete all as specified.
2900Sqm--
... more
M&L for joint less Non Skid coloured ceramic tiles 7 to 8 mm thick (square/rect) area of each tiles exc .11 sqm but not exc 0.18 sqm as in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including provn of 10mm thick rendering of backing coat in CM 1:4 etc complete all as specified .
200Sqm--
... more
M&L for applying two coat of cement base paint over a one coat of white wash on newly plastered surfaces of walls including preparation of new surfaces complete all as specified and directed.
200Sqm--
... more
M&L for two coat of distemper oil emulsion over a coat of primer and 2-3 mm thick JK Birla wall care putty including preparation of new plastered surface of wall complete all as specified and directed.
300Sqm--
... more
M&L for complete removal of existing old surfaces treatment of wall by scrubbing with wire brush washing down with water and applying two coats of cement base paints, complete all as specified and directed by Engr-In-Charge.
2500Sqm--
... more
S&F steel window box type made out of 16 gauge steel section for frames & shutters as per drawing No TD-A sheet 01/03 to 03/03 with openable both glass and gauge shutters including box hinges 75mm long 12mm dia, 100mm long handle and tower bolt 150mm long, MS hooks & eye 150mm long all as applicable complete all as specified and directed. (Glass & wire mesh shall be paid separately) incl M & L for providing PCC type B-1 ,1:2:4(using 20mm graded stone aggregate) to fill the frame and making good complete all as specified and directed by Engr -in- Charge.
886Sqm--
... more
S&F as pressed steel frames (125x60) mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of primer complete, as specified, supplied and fixed complete all as specified and directed.
2585RM--
... more
All as per serial item No 249 above but 105x60mm
674RM--
... more
Supply and fix 300 mm long mild steel sliding door bolt, bolt type stove enameled black with bright bolt not less than 12 mm dia with an including a minimum of six bolts and nuts (four on bolt plate and two on staple plate) complete all as specified and directed.
436Each--
... more
S&F 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified.
1908Each--
... more
S&F extruded aluminum alloy handles fabricated type and anodised of size 150mm, complete all as specified.
1182Each--
... more
S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
852Each--
... more
S&F solid PVC door frame of size 50 x 47 mm made out of 5mm thick plain colour PVC sheet re-inforced with MS square tube, supplying and fixing in opening as per manufacturers instructions drawings and specifications complete all as specified and directed.
1135RM--
... more
S&F factory made solid PVC moulded door shutter, 28 to 30 mm thick (Stiles), with 2,4 or 6 raised panel design with 2 mm thick 3D wood grain Moulded PVC sheet Polyurethane painted on the front face with particle board core and 2 mm plain color PVC sheet on back face as per specification and drawing complete all as specified.
340Sqm--
... more
S & F 100 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified.
176Each--
... more
S & F 100 mm aluminium handles, cast type anodised complete all as specified.
352Each--
... more
S&F in repairs PVC waste pipe of standard pattern, 32mm bore socketed end 600mm long for wash basin complete all as specified.
88Each--
... more
S&F in repairs 32 mm waste fittings of brass chromium plated for wash hand basin with long screwed shank and flynut flange complete all as specified.
88Each--
... more
S&F in repair 125mm dia MS chromium plated grating with holes fixed in cement mortar (1:3) complete all as specified.
264Each--
... more
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.
225Qtl--
... more
M & L for framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. as in chajjas n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.
7170Kg--
... more
S&F in repairs CP brass shower rose 125 mm size suitable for 15mm bore pipe complete all as specified and directed .
88Each--
... more
Material and labour for machine pressed precast PU coated concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment laid over 50mm thick compacted sand cushion complete all as specified and directed. (Note : - Sand cushion will be measured and paid separately).
350Sqm--
... more
M&L for hardcore of gauge n exc.63 mm(using broken stone or boulders) deposited, spread and levelled in layers n ece. 15 cm thick, watered and rammed to a true surface all as specified.
99.46Cum--
... more
S&F in repairs CI nahani traps (ISI marked) 75mm dia out let with CP grating incl jointing to waste pipes in run lead complete all as specified.
172Each--
... more
S&F in repair branch pieces 100 mm size, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches all as specified
279Each--
... more
S&F in repair branch pieces 75 mm size, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parallel branches all as specified.
185Each--
... more
S&F in repair 100 mm size sockets (double collars)
95Each--
... more
Taking down cement plaster of any description and material and labour for rendering 12mm thick in CM 1:4 laid to achieve slope with two coat of tape create mixed (1:2) with cement slurry @ 500 gm per sqm as per manufacturer instruction in sunken portion of toilets finished even and smooth without extra cement and applying a coat of hot blown bitumen 85/25 grade at the rate of 1.20 kg per sqm and applying one coat of hot blown bitumen 85/25 grade at the rate of 2.6 Kg per sqm and one layer of 0.5 mm thick fibre tissue and final layer of hot blown bitumen 85/25 grade at the rate of 2kg per sqm including getting out complete all as specified and directed. Note : Gurantee for the treated area has been considred as per manufacturer instructions
219Sqm--
... more
S&F 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as specified and as directed.
156Each--
... more
M&L for dismantling Bricks (laid flat or on edge) or brick tiles laid bedded and pointed in any mortar in floors, channels, kerbs, aprons, etc. (each layer)
537X Sqm--
... more
Demolition of mud in roof any thickness inlcl plastering and leeping and disposal up to 50 meters all as specified.
719.5Cum--
... more
S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal
66Each--
... more
S&F 75mm dia PVC (SWR) branch piece, single (single Y) equal or unequal
66Each--
... more
S&F 110mm dia PVC (SWR) junction single, (Single T) equal or unequal
66Each--
... more
S&F 75mm dia PVC (SWR) junction single, (Single T) equal or unequal
66Each--
... more
S&F 110mm dia PVC (SWR) couplers
66Each--
... more
S&F 75mm dia PVC (SWR) couplers
66Each--
... more
Supply and fix cast iron cowl for 75 mm bore of pipe with cement joint, complete all as specified
62Each--
... more
Supply and fix cast iron cowl for 100 mm bore of pipe with cement joint, complete all as specified
62Each--
... more
M&L for 100mm PCC 1:4:8 type D2 (40mm graded aggregate) in sub base.
2043.04Sqm--
... more
M&L for 100mm PCC 1:2:4 type D2 (40mm graded aggregate) in sub base.
800Sqm--
... more
M&L for felling of tree n exc. 30 cm girth including cutting of trunk, and branches and stacking of serviceable material and disposal of unserviceable material to a distance n exc. 50 m and clearing site complete as specified and directed by Engr-in-Charge.
50Each--
... more
M&L for 150 mm bore DWCPE pipe laid in trenches and jointed and connecting to Septic tank as specified and directed by EIC.(HQ LETTR NO .86486/WC/JZ/E4/(U3))
733RM--
... more
Removal excavated material to a distance exc 500 m but n exc 1.50 km and depositing where directed completed all as specified
84CUM--
... more
S & F in replacement precast fibre reinforced cement concrete Manhole cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 450mmx450mmx50mm omplete all as specified and as directed.
50Each--
... more
S & F in replacemen precast fibre reinforced cement concrete Manhole cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mmx75mm omplete all as specified and as directed.
170Each--
... more
Excavation in trenches n exc 1.5m wide and exc 1.5 mtr but n exc 3.0m in depth for foundation etc and getting out in soft/loose soil complete all as specified and directed.
41Cum--
... more
Cement conc 1:4:8 type D-2 bed to 200 mm drain pipes incl packing under and haunching against the sides of pipe after they are late and tested for 150mm bore pipes.
110RM--
... more
Cement conc 1:4:8 type D-2 bed to 150 mm drain pipes incl packing under and haunching against the sides of pipe after they are late and tested for 150mm bore pipes.
50RM--
... more
S&F 200mm internal dia of Reinforced concrete pipes, classs NP-2, incl testing, laid and jointed complete with collars
110RM--
... more
Cutting of exising 200 mm dia manholes for connecting new drains making good to pipe and rendering cutting out exising benching for and forming benching for and forming branch channel (1/2round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified directed by Engr-in-Charge.
23Each --
... more
Cutting of exising 150mm dia manholes for connecting new drains making good to pipe and rendering cutting out exising benching for and forming benching for and forming branch channel (1/2round or 3/4 section ) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching required complete all as specified directed by Engr-in-Charge.
2Each --
... more
M&L P C C ,1:3:6 type C1 (20 mm graded aggrigate)as in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing
2Cum--
... more
M&L for PCC 1:3:6 type C1 as in back filling of pressed steel door frames
11Cum--
... more
Supply and fix 200 mm long mild steel barrel tower bolt , complete all as specified
568Each--
... more
M & L for complete removal of existing treatment over walls and applying two coats of cement base paint over a coat of cement primer.
3500Sqm--
... more
Roughening of surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dusts etc.
920Sqm--
... more
S & F in repairs CI nahani traps (ISI marked)100 mm dia outlet with CP grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)
35Each--
... more
S&F steel windows including pressed steel frame made of 1.25 mm thick MS sheet of size 125x60 mm double rebated with side hung shutter both glaze,gauge and guard bars of 12mm square bars placed horizontally/vertically @ 125mm C/C ,including box type hinges steel handless and peg stay ,tower bolts and including glaze/gauge and guard bars dovetailed or welded ,incl one shop coat of red oxide primer ( wire gause and glass pan shall be measured seperately ). Incl M&L for providing PCC 1:2:4 (12.5mm graded stone aggregate) to fill the frame and making good complete all as specified and directed by Engineer in Charge .
255Sqm--
... more
Dismantling of PVC water tanks of exc 250 litres and n.exc 500 litres capacity of any condition or type complete all as specified and directed.
2Each--
... more
(a) Dismantling of floor of WC with Indian type Water closet and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc complete all as specified and directed. (i) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (ii) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.(iii) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.(iv) The area of Each WC/ bathroom portion is n.exc 2.00 Sqm (v) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.Note : The work will be executed by authorised applicator.
64Each Job--
... more
M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika Plastocrete plus as specified.
408Sqm--
... more
M&L for sunken portion filled with 40mm graded brick bats or surkhi all as specified and directed
25Cum--
... more
M&L for cement concrete 50 mm thick PCC 1:2:4 type B1 (using 20mm graded aggregate) and finishing even and fair on sunken floor all as specified and directed
144Sqm--
... more
Taking down Angle iron chowkats with shutters of any description exc 1.5 sqm and not exc 4.00 sqm each and refixing in the same or other opening as required at site including repairing/jointing additional frames if required complete all as specified and directed. Note : The rate quoted by the contractor are inclusive of taking down old mild steel hinges carefully without damaging and refixing in the same or other opening as directed. Nothing extra cost will be allowed in this account. The angle iron, hold fasts and hinges welded will be paid under separate items.
25Per Leaf--
... more
M&L Frame work as in door chowkhats with angle iron welded together ends of angle shouldered and fixed to opening and welding 3 Nos mild steel butt hingese, and 6 nos hold fasts made out of FI 25x3 mm 30 cm long for fixing of chowkhats( Butt hinges paid separately) complete all as specified
1580Kg--
... more
Ditto all as per item No.309 hereinbefore but fixing only ditto.
25Each--
... more
S&F 25 mm thick flush shutter solid core construction with block board core and ply wood face panel commerical type on both side to be fixed as shutter of cupboard/kitchen cup board/loft board including two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
309.2Sqm--
... more
S&F 75 mm long (size) butt hinges, medium weight, cold rolled mild steel, complete all as specified.
826Each--
... more
S&F 300mm long, Aluminium anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.
292Each--
... more
Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of 5.00km, beyond the lead included in the rates, including loading, unloading and stacking at the destination
800Cum--
... more
S&F in repairs 300mm long, Aluminium anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts complete all as specified and directed.
196Each--
... more
S&F Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified and directed
288Each--
... more
S&F I repairs Hasp and staple, 75mm size, safety type, brass with mild steel hinge pin including bolt to hinge plate & fixed with screws, complete all as specified and directed
96Each--
... more
S&F anodised aluminum powder coated glazed/gauzed windows and ventilators shutters side hung type / three track sliding window without sash bar aluminum section weighing 0.65 kg per mtr including necessary jointing cleats glazing clips rubber packing anodised aluminum beading screws including fittings such as 1no Hoot and eye 150mm long,2 no Alluminium hinges 75mm long,2 no100 mm long tower bolt and one no alluminium handle 100mm long etc in each shutter complete all as specified. Note : The window shutters shall be double leaf and double shutter/double shutter and single leaf. The rates quoted by the contractor deemed to be inclusive of entire completion of work like glass panes 5.00mm thick and stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm complete. Net area to be measured for payment purpose.
600Sqm--
... more
S&F in repairs CP brass shower rose 150mm dia with chromium plated arm fixed to 15mm pipe of revolving type complete all as specified and directed.
176Each--
... more
M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified.Note : Form work shall be 100% leak proof. For purpose of payment area in touch with concrete shall be measured.
150Sqm--
... more
S&F in repair 100mm dia (bore of pipe) cast iron Tee diminishing pieces or tapers (larger bore measured) with cement joints, complete all as specified.
174Each--
... more
All as per item 91 but 75mm dia (bore of pipe) Tee
85Each--
... more
M&L Screed bedding 20mm thick plaster in CM 1:4 on roof finished even and fair using integral water proofing admixtuire.(Note : Supply only water proofing admixture shall be measured and paid separately) complete all as specified and directed .
1250Sqm--
... more
M&L 19mm thick MDF boards, grade 1 quality, exterior grade, commercial type, fixed with screws to timber frame-work face complete all as specified and directed.
150Sqm--
... more
Taking down carefully without damaging old mild steel railing and refixing in the same or other places as directed by the EIC incl 2coats of synthetic enamel paint after complete removal of existing treatment complete all as specified. The rates quoted by the contractor is deemed to include the necessary making good of damaged portion filling on walls with PCC , 1:2:4 type B1 using (20mm graded aggregate)
500Kg--
... more
M&L for applying a coat of bituminous primer conforming to IS - 3384 @ 0.50 Litres/qm on prepared surfaces of plaster and applying APP based polymeric membrane with mineral slate finish @ 4.00 Kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric and sealing joints by torch application complete all as specified and directed. Note : The work will be executed by authorised manufacturers/applicator
4345Sqm--
... more
M&L Cement concrete 1:2:4 type B0(using 12.5mm graded crushed stone agg) as in roof levelling complete all as specified and directed
325.38CUM--
... more
M&L for providing Reinforced cement concrete M-25 Deign Mix (using 20 mm graded crushed stone aggregate) as in Slabs supported on walls,culvert slab landings beams and columns in floors,canopies, deck slabs,shelves and the like etc including form work complete all as specified & directed.
6Cum--
... more
M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and directed.
1810Sqm--
... more
M&L for complete removal of existing treatment on surfaces of walls/ceilings by scrapping down with mechanical grinder on old walls as per the specification of manufacturers instructions of paints/OBD complete all as specified and directed.
8288Sqm--
... more
M&L for preparation of newly plastered or unplastered surfaces of walls complete all as specified and directed.
800Sqm--
... more
All as per item No. 331 above but on ceilings
1440Sqm--
... more
M&L Preparation of newly/old plastered surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.
7000Sqm--
... more
M&L Preparation of newly/old plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
1440Sqm--
... more
M&L Preparation of newly/old plastered surfaces of walls and applying two coats of Apex Ultima exterior paint over two coat of base coat of apex ultima on walls complete all as specified and directed.
7880Sqm--
... more
M&L for supreme quality heat resistent terrace tiles of size exc 0.09 sqm, 20mm thick over 15mm thick screed in CM 1:4 complete all as specified and directed.
4070Sqm--
... more
M&L for followings :- (i) Removing plaster & finishes all around the coloumns, slabs & beams(on all four sidescription of column to full height , three sidescription of beam to entire span & bottom of slab to area as directed)(ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible)(iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed)(iv) Cleaning exposed concrete substrate by using water jet.(v) Removing visible rust along the length of reinforcement using hand tools as approved. (vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out complete all as specified and directed.
1850Sqm--
... more
M & L for removal of rust from reinforcement completely by rubing with wire brush or emeray paper and proper cleaning of reinforcements with Rust converter manufactured as per manufacturer’s instructions complete all as specified and directed.
1200Sqm--
... more
M & L for application of zinc rich primer coat for corrosion protection on reinforcement bars and shall be applied in a manner such that primer shall be a coating of atleast 40micron complete all as specified and directed.
1850Sqm--
... more
M&L for providing PMM (Polymer modified cementitious mortar) :- (i) Dry sub strate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness. Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairely rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use. (iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufactuer complete all as specified and directed.
1850Sqm --
... more
M&L for treatement of cracks found in the core concrete :- (i) Opening of crack by making a ' V' notch/groove of size 12mm x 12mm over the entire length of the crack as identified by the Engr-in-charge. (ii) cleaning ' v' notch/groove of all dust/debris/loose material (iii) Drilling hole of 16mm dia and about 40mm deep along the length of crack @ (300 mm c/c or thickness of structural member whichever is less) Note : In case length of crack is found less than 300 mm then min 2 holes shall be drilled. (iv) Inserting 12 mm dia flexible PVC one way injection nipple in the hole drilled above and fixing the nipple with the help of fast setting epoxy putty. (v) seal the surface around the nipple and the area of crack between successive nipples polymer modified mortar to ensure that there is no leakage from any gap. (vi) Allow the PMM to cure for 24 hours and ensure that firmly fixed in postion. (vii) cleaning nipple one by one commencin from the top to bottom in case of column and one by one in alternate direction incase of beam/slab using blow compressed air followed by water injection. An Ensuring that there is no obstruction in free flow of grouting materials complete all as specified and directed.
600Each--
... more
(viii) Injecting " resin with very low viscosity monomer by mixing resin and hardener in proportions recommended by manufacturer by using injection gun equipped with pressure gauge & valves for controlling of flow of compressed air & resin. Note : pressure shall be in the range of 1-2 kg/sqm and shall be done in nipples one by one as per order recommended by manufacturer. Mixing of resin and hardenere shall be mixed in small quantities so as it is consumed with in 30 minutes. Before use mixer shall be stirred thoroughly. (ix) Allow entire effected surface to cure for 24 hours. (x) cutting out projected parts of the nipple & seal the hole in the nipple with epoxy putty as recommended by manufacturer. (xi) cleaning exposed surface of substrate off any dust /loose material after ageing of the grout as recommended by manufactuer. (NOTE : THE RATE QUOTED IS INCLUSIVE FOR ENTIRE COMPLETION OF WORK. THE MEASUREMENT FOR THE ABOVE ITEM IS MADE FOR EACH SET OF HOLE COMPLETE ALL AS SPECIFIED)
---
... more
M&L for treatement of core concrete when found to be porous/honeycombed :- (i) Marking the area in marker as directed by the Engr-in-charge.(ii) Drilling holes of upto 16mm dia in an orthogonal grid on exposed cone of member @ 150 mm c/c both way, depth of the hole shall be about 60% of the element thickness.(iii) clean the drill hole using compressed air removing the dust/dirt.(iv) Inserting 12 mm dia flexible PVC one way injection nipple in the hole with the annular space around the nipple sealed with epoxy putty. It shall be ensured that the injected grount does not leak.(v) Allow the nipple to cure for 24 hours.(vi) Injecting " Resin with very low viscosity monomer by mixing resin and hardener in proportions recommended by manufacturer by using injection gun equipped with pressure gauge & valves for controlling of flow of compressed air & resin.Note : pressure shall be in the range of 2-3 kg/sqm and shall be done in nipples one by one as per order recommended by manufacturer. Mixing of resin and hardenere shall be mixed in small quantities so as it is consumed with in 30 minutes. Before use mixer shall be stirred thoroughly.
300Each--
... more
(vii) Allow entire effected surface to cure for 24 hours.(viii) cutting out projected parts of the nipple & seal the hole in the nipple with epoxy putty as recommended by manufacturer.(ix) cleaning exposed surface of substrate off any dust /loose material after ageing of the grout as recommended by manufactuer.
---
... more
M&L for Providing & Pouring Micro concreting M-40 grade :- (i) Dry concrete substrate surface and free of debris & dust (ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes). (iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed. Note : The cost of micro concrete M-40 grade & Epoxy bond coat is inclueded in this item.
3Cum--
... more
M&L for Drilling & chemical anchoring of new rebars/stirrups :- (i) Drilling in to the sound RCC members for anchoring of rebars/stirrups as directed, the dia of hole to be match with dia of rebar & length of drilling as under :- 8 mm dia bar - drilling length 80 to 100 mm - 384 Nos.Note : Anchoring of new re-bars of any dia as directed in to the sound RCC members as directed using pure epoxy resin anchoring mortar with appropriate diameter of drilling of holes as mentioned above for proper bonding into the concrete etc., complete. (The cost of drilling hole & chemical anchoring with epoxy resin is inclueded in this item)
1650Nos--
... more
M&L for Drilling & chemical anchoring of new rebars/stirrups :- (i) Drilling in to the sound RCC members for anchoring of rebars/stirrups as directed, the dia of hole to be match with dia of rebar & length of drilling as under :-16 & 20 mm dia bar - drilling length 160 to 180 mm - 700 NosNote : Anchoring of new re-bars of any dia as directed in to the sound RCC members as directed using pure epoxy resin anchoring mortar with appropriate diameter of drilling of holes as mentioned above for proper bonding into the concrete etc., complete. (The cost of drilling hole & chemical anchoring with epoxy resin is inclueded in this item)
1650Nos--
... more
M&L for provide guniting in two layers over steel welded mesh 2 mm dia of wire and total aperture 75 mm, thickness of gunite n.exc 25 mm thick (average thickness) using cement mortar 1 :3 with OPC 43 grade cement mixed with polycrete admixture @ 2 % by wight of cement or as per manufactures instructions and finally applying cement plaster over gunite surfaces of required thickness to give an even uniform and smooth finish conforming to proper Geometrics in cement mortar 1:4 to match with the existing surface as in side and soffits of slabs,chajjas,fins,facias ,parapets ,columns and beams etc complete including necessary scaffolding ,shuttering necessary chased to brick work or RCC members at any height upto four storey buildings incl removing of small trees shrubs etc all as specified(Note: steel welded mesh to be welded with the existing reinforcement. The cost of welded meshis to be welded with the existing re-inforcement shall be paid under supply only items complete all as specified and directed.
500Sqm--
... more
Impregnating cream for injection into masonry or concrete wall 230 mm thick against capilary rising humidity complete all as specified and directed. Method of Applicaion Methodology (a) The surface must be sound, absorbent, clean, free of dust, oil, paint, curing agents, loose cement or lime plaster & concrete, debris, or any separation layers. (b) The plaster must be knocked off at least 50 cm beyond the visibly penetrated area. (c) Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm. All sharp edges/joints need to be levelled ; loose concrete to be removed. (d) Drill boreholes at ground level horizontally. The boreholes are drilled horizontal into the masonry.
250Rm--
... more
(e) The holes should be drilled until a depth of approx 5 cm (for a 6cm thick wall) before the end of the wall is reached. The boreholes should have a diameter of 12mm upto a maximum of 15mm and should be spaced approx. 100 to 120mm apart and the vertical offset is 6 cm max. (f) Before inserting impregnating cream the boreholes must be cleaned from boring dust by using air pressure. It is not necessary to pre-wet the borehole. (g) For applying impregnating cream, the dosing system inserted as far as possible into the borehole. While dosing the product uniformly, the injection nozzle is pulled out leading to a completely filled borehole(h) Treatment of highly absorbent masonry might require repeated filling of the borehole. Depending upon extent of damage, the cream can be re-injected into the same hole after 24 hours. Depending on absorbency, application or masonry thickness 0.1 to 0.15 litre/m with 10 cm wall thickness.
---
... more
Supply only mild steel welded mesh 2 to 3 mm dia of wire and total aperture exc 50mm but n exc 75 mm in available size all as specified and directed.
2628Kg--
... more
M & L for 10 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement and applying two coats of oil bound distemper over alkali resistant priming paint and 2mm thick wall care putty on ceiling surfaces including taking down old plaster on ceiling complete all as specified.
1100Sqm--
... more
M&L complete removal of existing treatment of old surface of ceiling including tucking of surface and grinding the surface with mechanical grinder for preparation of new surface and applying 2mm thick putty POP punning/plaster including two coat of oil bound distemper on ceiling complete all as specified and directed
3300Sqm--
... more
M & L for 15 mm thick internal rendering in cement mortar 1:6 on fair face of brick walls/ concrete surfaces & finished even and smooth without using extra cement,applying two coats of oil bound distemper with roller brush (white or tinted) over a coat of 2 to 3mm thick chalk whitening wall putty over one coat of alkali resistant primer on plastered surfaces on newly plastered wall surface including taking down old plaster complete all as specified.
3800Sqm--
... more
M&L for preparation of old decorated surface (plastered or unplastered) of walls by complete removal of existing treatment by mechanical grinder and applying two coat of oil bound distemper with roller brush over a coat of 2 to 3 mm thick wall care putty on wall surface finished even and smooth over one coat of alkali resistant primer on plastered surfaces of walls complete all as specified .
10681.9Sqm--
... more
M&L POP cornice 75mm to 100mm thick as per design/moulding as approved by Engr-in-charge in corner of ceiling incl two coats of oil bound distemper complete all as specified and directed.
3490RM--
... more
S& F 35 mm thick flush shutters (factory made) solid core construction, with block board core and plywood face pannel, both face is covered with decorative face veneer with lipping/frame to match both sides. Flush shutters shall have teak wood edging complete all as specified.
148.24Sqm--
... more
S&F Factory Made Solid PVC double door frame of size 120 x 50mm with a wall thickness of 5mm (+0.25) made out of extruded 5mm (+0.25) thick prelam PVC sheet of density 600kg/cum manufactured by an ISO-9001-205 certified company ,and by joining 3 Nos. heat moulded PVC section, The Hinge section of size 35 x 35mm shall be made from plain colour PVC sheet of 5mm (+0.25) thickness, the inside section will be covered with 5mm thick PVC sheet C shape covering section of size 120mm x 50mm. At centre top section of 5mm (+0.25) thick 50x50x50mm pattam section should be pasted with solvent cement adhesive to make double pattam of frame. The frame shall be mitre cut at two corners and joined with 4 Nosof 150mm long L brackets of 19mm x 19mm M.S square tube or joint by fusion heat welding. The two vertical doors frames are to be shall be reinforced with 25mm x 25mm M.S. square tube of 19 gauge through out the frame. The door frame shall be fixed to wall using 8/100mm long M.S Screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to provided for each vertical member & minimum 2 nos. for horizontal member etc complete as per manufacturers specifications and direction of Engr in charge.
264RM--
... more
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube,
301.2RM--
... more
Providing and fixing factory made uPVC any colour sliding window Three track of area n exc. 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, Frame (88mm x 52mm), Sliding sash (42mm x 67mm), Sliding mesh sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm).Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (30mm x 18) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware (Touch lock of zinc alloyed (any colour powder coated), steel roller system, including 5mm thick toughened glass with single glazing bead and weather seal , Stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories). Note: Net opening will be measured for payment purpose.
240Sqm--
... more
Providing and fixing factory made uPVC any colour sliding window Three track of area exc. 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm ( + 0.2mm). Window profile with hollow section with multi chamber, Frame (88mm x 52mm), Sliding sash (42mm x 67mm), Sliding mesh sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm).Glazing bead (24.5mm x 16mm) will be mitred cut and fusion welded at all corners, including railing of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 + 0.2mm thick galvanised steel frame (30mm x 18) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasterners. Hardware (Touch lock of zinc alloyed (any colour powder coated), steel roller system, including 5mm thick toughened glass with single glazing bead and weather seal , Stainless steel wire cloth 0.36mm nominal dia of wire and avg width of aperture 1.40mm and required accessories). Note: Net opening will be measured for payment purpose.
42Sqm--
... more
S&F in repairs 100 mm long (size) butt hinges, medium weight cold rolled stainless steel ISI marked complete all as specified and directed.
1630Each--
... more
S&F in repairs 75 mm long L Bihari concealed type hydrauilc hinges incl stainless screw complete all as specified.
1390Each--
... more
S&F 250mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed.
157Each--
... more
S&F in repair 250mm long, stainless steel of AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified and directed.
111Each--
... more
S & F in repair 200mm long (size) aluminium anodised, barrel tower bolt of extruded section and fixed, complete all as specified.
30Each--
... more
S&F 150mm size mild steel pressed handles, oval type, stove enamelled black complete all as specified.
180Each--
... more
S&F 150mm size extruded aluminium alloy handle, fabricated type, anodised, complete all as specified.
534Each--
... more
S&F in repair 150mm size stainless steel AISI 304 grade fancy type handle complete all as specified and directed.
222Each--
... more
S&F in repair stainless steel AISI 304 grade floor door stopper with hard drawn steel spring 140mm long complete all as specified and directed.
42Each--
... more
S&F in repair floor door stopper aluminium body double tounge anodised with hard drawn steel spring 140mm long complete all as specified.
50Each--
... more
S&F in repairs 40mm dia and 75mm long, extrruded fancy type SS handle for kitchen cup boards shutters, cabinets, crocery shelf drawers fixed with nuts , screw and washer of mild steel bright finished , complte all as specified.
1300Each--
... more
S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18 mm and fixed stainless steel wire staple, complete all as specified and directed.
125Sqm--
... more
Hacking out old broken glass of any thickness size quality or description from wooden frames /Aluminium frame fixed with wooden beads/aluminium beads incl Supply and fixing in repair 4.00 mm thick sheet galss ordinary quality and glazing with wooden bead/aluminium beads, complete all as specified
50Sqm--
... more
M&L for 16-18mm thick Jaisalmer stone of uniform texture as in strips/ borders in between and around the Udaipur Green Marble flooring over and including 15mm thick screed bed in CM 1:6 including polishing complete all as specified and directed. Note:- Width of Jaisalmer stone strip should be 100 mm.
30Sqm--
... more
S&F in Soft closing ball bearing telescopic channel of size 22 inch long fixed with screws in cupboards incl all fittings complete all as spd and directed by Engr in charge.Note : Runner/ Channel should be SS 304 grade and load capacity should not be less than 45 kgs
924Each--
... more
“S&F Modular Cabinet Kitchen accessories of Stainless Steel grade-304,6mm size rod thickness including :- (i) Perforated Cutlery basket, (ii) Grain trolley, (iii) Thali basket, (iv) Cup & saucer basket, (v) Glass basket, (vi) Plate basket, (vii) Premium magic corner (viii) Oil Pull out Tray ( Triple basket layer) of size as per site requirement all spd and directed by Engr in charge
1350Kg--
... more
S&F 25mm dia GI tubing medium grade with all fittings and fixed to wall and ceiling or laid in floors etc complete, all as specified.
905RM--
... more
S & F 50 mm dia Galvanised Iron steel tubing, medium grade as in spout in short length, complete all as specified.
325RM--
... more
S&F in repair cast iron floor trap square type with Cockroch Proofing CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.
80Each--
... more
S&F Stainless steel grill (Grade- 304) using 10mm thick square bars 100mm centre to centre of weight not less than 0.62 kg/Rm incl necessary frame and accessories for window and ventilator grill/ guard bar complete all as specified and directed.
4800Kg--
... more
S&F in repairs vitreous chinaware coloured wall hung wash hand basin with full pedestal of size 550mm x 480mm complete including , CP Waste coupling ,waste pipe ,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed by Eng in charge.Make Cera New Cat No: S2040115 Wash basin S2090111 Pedestal or Equivalent
128Each--
... more
S&F in repair fancy type glass corner 250mm radius of 10mm thick toughned glass with CP railing fixed with screws fancy type complete all as specified .
156Each--
... more
S&F stainless steel of AE - SI 316 grade tubular towel ring including apair of CP brass bracket complete all as specified .
128Each--
... more
S&F in repairs of 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed
12Each--
... more
M & L Cement concrete type B-2 1:3:6 (40 mm graded stone aggregate) as in sub base, 75 mm thick finished even and smooth without using extra cement complete all as specified and directed.
420Sqm--
... more
S&F in repairs PVC moulding to MS flat railing thickness not less than 5mm and width upto 100mm.
120RM--
... more
Dismantling of floor size not exceeding 4.00 Sqm mtr for EWC water closet and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of cementitious systme, middle coat of glass fibre reinforcement and top coat of cementitious system. (d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with plasticiser plus as specified. (e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (g) The area of Each WC portion is n.exc 4.00 Sqm each. (h) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. Note : The work will be executed by authorised manufacturers/applicator.
90Each--
... more
Dismantling of floor size not exc 1.50 Sqmtr for IWC Water closet and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc all as specified and directed. (b) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (c) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of cementitious system, middle coat of glass fibre reinforcement and top coat wof cementitious system. (d) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with plasticise as specified. (e) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (f) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. Note : The work will be executed by authorised manufacturers/applicator.
30Each--
... more
S&F of 150 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed complete to walls, ceilings or in floors with suitable clamps/bracket including taking down old PVC/CI pipes and necessary cutting through RCC roof and brick work etc (above six storey height) and making good all as specified.
900RM--
... more
S&F of 150mm dia PVC (SWR) bends any radius with solvent joints, complete all as specified.
45Each--
... more
M&L for Provision of letter boxes enclosure of size 1350x1050mm size made up of 19mm thick exterior plywood with backing including necessary frame work with first class hard wood wooden fillets of size 75x50 mm all round and making arrangements to fixing of letter box of size 230x320x150 mm i.e 12 Nos of letter box in one enclosure including two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.
4Each--
... more
M&L for 16 to 18mm thick granite stone of size 3' x 2' fixed on wall over 15mm thick screed bed in cm (1:4) and ingraved flat Nos and border over the stone for building insignia (letter size 3" to 2") complete all as specified and directed.
4Each Job--
... more
M&L for 22 to 25mm rubber moulded ultra tiles over 15 mm thick screed bed in cm 1:6 and jointed and pointed in white cement mixed with pigment to match the shade of tiles of flooring all as directed.
510Sqm--
... more
Cutting shrubs wild growth, plants not exc 30 cm girth grown on permanet structures and removing same growth right from roots and stopping the recurrence by injecting herbicide Glyphosphate 4+ solution (04 % concentrate) into plant root to eliminate further growth. Application shall be as per manufactureres intructions. The disturbed area shall be repaired with PCC (1:2:4) Type B0 mix and surface finished even and smooth in cm 1:4 incl applying two coats of matching finish i.e.Exterior acrylic emulsion paint of same shade & finish. Likely minimum number of shrub/plants in each Building is not less than 50 nos . Work in high rise building upto six storiey height complete all as specified and directed at site
12Each Block--
... more
M & L for preparation of newly plastered surfaces of walls and applying two coats of weather proofing exterior acrylic emulsion paint premier quality on wall surface over one coat of primer from the same manufacturer and applying a layer of 2mm thick wall care putty again sand papering thus make surface smooth complete all as specified and directed upto a height of G+5
4650Sqm--
... more
M&L for preparation of old decorated external wall surface by complete removal of exising treatment by mechanised sander of berger paints or equivalent makes viz Xpress sanding machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying a layer of 2mm thick wall care putty again sand papering thus make surface smooth and applying two coats of wheather proofing exterior acrylic emulsion paint premium quality on wall surface complete all as specified and directed
12975Sqm--
... more
M & L for Post Construction anti termiteTreatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor sall as specified and directed.
2350Sqm--
... more
S&F for stengthening existing reinforcement by use of mild steel bars of any dia , cut to length, bent to shape required, including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
1000Kg--
... more
M&L for providing pre cast RCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate as in culvert slab/landings etc including form work complete all as specified & directed.
9Cum--
... more
M&L Cement concrete 1:2:4 type B1(using 20mm graded crushed stone aggregate) as in bed blocks for hold fast, coping, benching etc. including weathering, slightly rounded or chamfered angles or throating including form work to concrete surfaces complete all as specified and directed upto two storey height.
2Cum--
Evaluation Notes How It Works ?

Business Providers

No results found

Sorry, no results found!

Business Seekers

No results found

Sorry, no results found!

Probable Bidders

  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
http://bit.ly/2y8uxEJ

CA No. CEDZ-06 OF 2021-22 SERIAL PAGE NO. APPENDIX ‘A’ TO NOTICE INVITING e- TENDER NIT NO. 04/CEDZ/2021-2022 (Tender ID : 2021_MES_451936_1) 1. Name of work ADDN/ALTN & UPGRADATION OF VARIOUS DUS, JCO/ORS MD ACCN, QTRS AT PRATAP CHOWK, ARJAN VIHAR, OLD & NEW APS COLONY, DK-I & II, RR COLONY, TODAPUR AND URI ENCLAVE UNDER GE (CENTRAL) DELHI CANTT 2. Estimated Cost of Work Rs. 1959.00 lakh (At par market) 3. Period of Completion 365 Days 4 Cost of tender documents Rs. 3000 in the form of DD/Banker’s cheque from any Scheduled/ Nationalized bank in favour of GE Central Delhi Cantt payable at Delhi(Copy shall be uploaded online and original to be submitted offline within 5 five days of date of opening of Technical bid). However DD/ Banker’s Cheque shall be returned to the applicants whose cover No. 2 is not opened. Please note that cover No. 2 (price bid) will be opened only in respect of qualified and eligible contractORs who fulfill the eligibility criteria according to their technical bid submitted in cover No. 1 (application/technical bid). 5. Website/portal address http://defproc.gov.in. 6. Type of contract The tender shall be item rate based on IAFW-1779A with list of works to be quoted by the contractor 7. Information & Details Refer critical dates shown on website (a)Bid submission start date (b) Last date of bid submission (c) Date of bid opening 8. Eligibility Criteria (A) For MES Enlisted Contractors Contractor shall be enlisted with MES in Class ‘SS’ & above and category ‘a (i)’ subject to satisfactory remarks wrt performance in respect of works in hand as reflected in Work Load Return (WLR) or any other report circulated by competant engineer authority. (B) For contractors not enlisted with MES The firms not enlisted with MES shall meet the following criteria:- (a) Contractor not enlisted with MES shall meet the enlistment criteria of ‘SS’ class MES contractORs & category ‘a (i)’ contractor with regard to satisfactorly completion of requisite value of works with Central/State Government/Central/State PSUS/ AWHO/ AFNHB/ CGEWHO/DGMP, Annual overover, bank solvency, working capital and other requirement given in Para 1.4 & 1.5 of Section I of MES Manual of Contracts 2020 as available in all MES formations as well as MES website (www.mes.gov.in) (b) Not Carry adverse remarks in Work Load Report (WLR) or any other similar report circulated by any competent authority. If already working in MES. (c) Not suspended/debarred/blacklisted (either permanently or temporarily) from participating in any bid or for business dealing by any Central/State Government Department or any Central/State Government PSU or any Autonomous Body under Central/State Government or any Local Body as on the bid submission end date.. 9. Tender issuing and Accepting Officer HQ Chief Engineer Delhi Zone and CE Delhi Zone 10. Name of concerned CWE CWE Delhi Cantt, Delhi Cantt 11. Executing Agency GE Central, Delhi Cantt 12. Earnest Money Rs. 13,05,000.00 (Rs thirteen lakh five thousand only) in the form of FDR/approved securities from any Scheduled/ Nationalized bank in favour of GE Central Delhi Cantt. MES registered contractORs are exempted from submission of EMD (copy to be uploaded online and original to be submitted offline within 5 five days of bid submission end date). CA No. CEDZ-06 OF 2021-22 SERIAL PAGE NO. Notes:- 1. After opening of Cover-I, if the number of MES enlisted contractors of eligible class as well as un-enlisted contractors, if any, fulfilling the other eligibility criteria given in NIT are less than 07 (Seven), application in respect of contractors one class below the eligible class shall also be considered subject to fulfilment of other eligibility criteria given in the NIT. Therefore, MES contractors one class below may also bid for this tender. However contractors of one class below the eligible cla

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.
whatsapp chat