Military Engineer Services Tender

Lump sum price works out by the contractor for "INTERNAL WATER SUPPLY" as listed in Sch 'A' Part-III complete all as specified and directed.

Lump sum price works out by the contractor for "ROAD/PATH/ HARD STANDING" as listed in Sch 'A' Part-IV complete all as specified and directed.

Lump sum price works out by the contractor for "EXTERNAL ELECTRIC SUPPLY" as listed in Sch 'A' Part-V complete all as specified and directed.

Lump sum price works out by the contractor for "SEWAGE DISPOSAL" as listed in Sch 'A' Part-VI complete all as specified and directed.

Lump sum price works out by the contractor for "AREA DRAINAGE" as listed in Sch 'A' Part-VII complete all as specified and directed.

Lump sum price works out by the contractor for "LIGHTNING PROTECTION" as listed in Sch 'A' Part-VIII complete all as specified and directed.

Lump sum price works out by the contractor for "EARTH WORK AND EXCAVATION" as listed in Sch 'A' Part-IX complete all as specified and directed.

Lump sum price works out by the contractor for "DISMANTLING/DEMOLITION" as listed in Sch 'A' Part-X complete all as specified and directed.

MISC ITEMS (Sch 'A' Part - XI). This Schedule is not pre-priced by MES and prepriced rates indicated " 0.0" under column 6 signified this fact only.

Supply and fixing Modular partition workstation 45mm thick with prelaminated top of 25mm thick as per approved colour. Workstation shall have glass/fabric/white board partition on the top of the table, with mobile pedestal, Keyboard and CPU trolley, Overall Size for 2 seating 2400x600x1200mm, complete all as specified and directed.

Supply and fixing wall mounting fan, 450 mm sweep, 230 Volt, rated motor speed not more than 1400 RPM, pull cord type 3 step regulator, pull cord type oscillation and mechanism for upward and downward adjustment including necessary fixing arrangement for proper fixing on wall as per site requirement complete all as specified and directed.

Supply and fixing vertical distribution board made out of CRCA sheet, double door, fixed flush in wall TPN 4 way 415 volts suitable for 'G' Frame MCCB upto 150A as Incomer bus bar and dust and vermin proof suitable for MCCB as incomer and MCB as outgoing including cutting chases in walls for fixing DB and making good the disturbed wall surface to match with existing specifications. Note : MCCB/MCB shall be measured and paid separately complete all as specified and directed.

Material and Labour for flame proof point wiring with single core FRLS PVC insulated unsheathed multistranded copper conductor, 1100 volts grade conforming to IS:694 with cable 2.5 Sqmm size drawn through and including stove enamelled steel concealed conduit, medium grade, ISI marked of size not less than 20mm dia, concealed in wall, ceiling in new metal flush box of 1.6 mm thick including one coat of synthetic enamelled black paint with modular cover plate with frame of suitable size of required colour fixed with brass screws and cup washers including single core multi stranded FRLS copper conductor 2.5 Sqmm PVC insulated cable as earth wire to common earth and connected to earth dolly and earth terminal box drawn in same concealed conduit for one light/fan point controlled by one switch all as specified and directed.

Supply and fixing Flame proof MCB DB 4 way 230 volts including incoming MCB SPN 32 Amps -01 No and outgoing MCB SP 10 Amps -01 Nos complete all as specified and directed.

Supply and fixing flame proof class 1 zone 1 weather proof wall mounting Exhaust fan, 300mm sweep, 1400 RPM, single phase suitable rated 240 volts, 50 cycles with CMR/ CPRI hazardous area gas groups IIA/IIB with fabricated construction casing suitable propeller wheel with dynamically balanced blades to avoid frictional spark hazardous front and rear wire guards-01 No, M-20 cable entry etc suitable for wall / bracket mounting arrangement etc. duly dark grey epoxy powder coated as per shade 632 of IS -5 including writing MES No 2cm height with synthetic enameled paint complete all as specified and directed.

Supply and fixing PVC waste pipe 32mm bore, 900mm long complete all as specified and as directed.

Supply and fixing 2-in-1, 15mm bore long body bib tap, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Material and labour for cutting of road/ hard standing up to a size not exceeding 20cm width and not exceeding 60cm in depth for laying of cable protection pipe, back filling of earth with well ramming providing 250mm thick PCC (1:4:8) type D2 and 150mm thick PCC (1:2:4) type B2 including making good the disturbed road/hard standing upto existing surface level complete all as specified and directed.

Material and labour for Design, development, supply, testing & commissioning of EHCC certified ground tubular effective Tripod type chemical earthing system ( CPRI tested for 15 KA current capacity for LT line) highly anti-corrosive, long life electrode with and including adequate protective coating to withstand severe wear conditions in the earth pit of the standard size comprising of 50x6x200mm earthing electrode strip both side 2 nos, qty 3 nos strip size 25x3x3000mm both side 2 nos and primary conductor and hollow Copper coated tube of dia 76mm x 3mtrs long as secondary conductor to install with suitable connection terminal conforming of IS 3043:1987 (latest revised) specifications, highly conductive packing material to be filled in earth pits for providing uniform, low resistivity anticorrosive, hygroscopic medium around the earth system for improving the efficiency of current dissipation 225 kg strip compound Bags minimum or sufficient quantities required as per site complete including HDPE earthing pit cover size 300x300x260 mm suitable cover, material and labour including testing after completion and result should be less than one Ohm complete all as specified and directed by Engineer-in Charge. (5 nos for LA+ 3 for Lightning protection)

M&L for Vitrified ceramic tiles (light shade) of 10 mm thick (square/rectangular) polished, area of each tile n. exc. 36 Sqm,laid as in floors etc set and jointed in neat cement slurry and pointed with coloured cement to match with surfaces of tiles, over & including 15 mm thick screed bedding layers of cement sand mortar (1:6) complete all as specified and directed.

Supply and fixing factory made SFRC manhole/drain cover (Grade M-25) heavy duty cover slab in rectangular / circular/ square shaped of size as required 80 mm thick including MS sheet 2mm thick and 80 mm wide all around the cover, set in cement mortar (1:4), complete all as specified and directed.

Supply and install hi wall inverter split unit indoor/outdoor complete with cordless remote control unit and with inbuilt air ioniser and plasma filter for better indoor air quality with minimum 5 star rating and capacity 2 TR complete all as specified and directed.

Supply and install voltage Stabilizer of capacity 5.0 KVA for automatic operation, SP, naturally air cooled, indoor type, input variation between 170-250V with an output voltage stabilized at 230+/- 2.5% complete all as specified and directed.

Material and labour for cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hold, drilled holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under and one finished coat of paint for installation of condensing unit on the wall/ ground complete all as specified and directed.

Supply and fixing Low density polyethylene pipes (LDPE) 20 mm dia of pressure rating 6 kg/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

Dismantling of 2 ton split AC connection and refixing the same after servicing including electrical connection and refilling the gas if required complete all as specified and directed.

Supply and fixing copper tubing of dia 5/8" including insulation and brazing work complete all as specified and directed.

Supply and fixing copper tubing of dia 3/8" including insulation and brazing work complete all as specified and directed.

Material and labour for submain wiring with two run of single core FRLS, PVC insulated, stranded, unsheathed 1100V copper conductor cable of size 4 Sqmm and drawing through & including Non metallic PVC conduit concealed in wall including one run of earth continuity conductor of size 4 Sqmm PVC insulated unsheathed stranded 1100V copper conductor cable and connected to earth dolly to be drawn in concealed PVC conduit including connecting to main board complete (The under mentioned runs of single core cable and specified runs of earth continuity conductors and relevant conduit with access shall be measured as a one runs length (a) Two runs of 4.0 Sqmm main cable and one run of 4.0 Sqmm size earth continuity conductor complete all as specified and directed.

Supply and fixing sheet metal single pole and neutral enclosure with two pin and earth plug and socket capacity complete with one No SP MCB capacity 20 amps complete all as specified and directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required for 250mm bore of pipe complete all as specified and directed.

Supply and fixing PVC insulated round sheathed copper conductor flexible cable of size 4 Sqmm 3 Core, 1100 Volts conforming to IS-494 complete all as specified and directed.