Military Engineer Services Tender

S&F in replacement of 20W Track mounted light suitable for general lighting with Adjustment angle of pane angle: 0 -320; tilt angle : 0- 90. Luminaire should have die cast heat sink with polycarbonate lense optics. The luminaire should have CRI 90/SDCM ≤3 and CCT of 3000K/4000K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 87 lumen/Watt and a minimum system lumen output of 1930lm lumens. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor 0.95 , THD 10%. Luminare Operating Temp should be -15 Degrees to 45 Degrees & Input Voltage Range to be 140-270V with Driver Efficiency min 85% & Surge protection of 2.5 KV. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters along with technical data sheets of product complete all as specified and directed. Make: Philips Cat Part No True Fashion Projector ST700T LED20 930PC PSU or equivalent of Trilux/ Endo

S&F in replacement of architectural RGBW (W=4000K) LED flood light with integral driver & housing made of Die-cast aluminium alloy . The luminaire shall be no bigger than 238 X 140 X 149mm (with bracket). The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The nominal weight of the luminaire shall not be more than 3KG. The luminaire shall be equipped with high-power LED's from Cree, osram, lumiled makes only. The fixture shall have 10° beam angle (±10%) & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 50W and system lumen output of not less than 2400 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables complete all as specified and directed. Make: Philips Cat Part No Uniflood C Pro Small BVP372 Aechitectural flood light or equivalent of Trilux/ Endo

S&F in repair of 100W Symmetric Wide/Narrow beam LED flood light luminaire with a housing of Pressure Die Cast Housing with engraved company name/Logo made from pressure die cast aluminum with Unique Integrated Peanut Lens Optics Anti Dust Exposed Lens & Heat Proof Silicon Rubber for maintaining IP protection with toughned glass cover. The luminaire should have CRI 70 and CCT of 5700K and shall be compliant with IP66 (no glue)/ IK07 protection. Luminaire shall be designed to emit at least 12000 nominal lumens with system efficacy of atleast 120 lumen/watt. The luminaire (LED + Driver) shall be designed so as to ensure life class of 50k burning hours @ design ambient temp 35 deg C. The luminaire should have fins on the back to ensure good heat dissipation and to prevent dirt from settling on the luminaire along with aiming angle scale. The electronic driver should be potted & fully integrated with efficiency 90%. Power factor 0.98 and THD 10% with a minimum inbuilt surge protection of 4KV Internal and 10KV External (to be placed inside fixture) with protection of 440V for 8 Hrs (P2P) along with high 325V (+15V) & low 100V (+15V)cut off feature and suitable for an operationg voltage range of 140-270V AC. The luminaire should have Class B Serviceability with Electrical Insulation of class 1. Driver case temp to be 80⁰C & suitable for working from -20⁰C to +55⁰C. LED Driver must comply to IS 15885 ( Part 2 / Sec 13 ). BIS certification for LED Luminaire is must , catalogue number of fixture offered must be mentioned in BIS certificate submitted. Luminaire manufacture shall provide LM79 report from NABL accredited lab & LM80 report issued by LED manufacturer complete all as specified and directed. Make: Philips Cat Part No Field Star Flood Light BVP282 LED120 or equivalent of Trilux/ Endo

S&F in replacement of LED lights with textile to create a white light ceiling surface for daylight experience that hides the source of light completely. Dimension of one panel luminaire dimension should not be greatar than 1,200 × 2400X140mm. Depth is considered with e-box. The light output should be at least 3200lm/sq mt. The CCT should be 3000k to 4000k. The CRI of the luminiare should be not less than 85. The luminaire should have life of 50k hrs for L70. The luminaire should have acoustics properties of αw 0.6 class C EN 11654, also the noise reduction co-efficient of NRC 0.6 ASTM C423 – 99. The luminaire driver should be compatible for DALI or 0-10V. The lumnaire should be compatible for ambient temp of 5 to 35 °C. Approbated for fire rating of fabric by (EN 13501) B-s1, d0 and panel at (EN 13501) B-s2, d0. CE certified luminaire complete all as specified and directed. Make: Philips/ Trilux/ Endo

S&F in replacement of 10W LED Bulkhead with a nominal system lumen output of 1100 lumens and a minimum system efficacy of 110lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI 70. The luminaire shall meet IP66 rating and IK 10 rating with THD 10% and PF 0.95. The luminaire housing should made of High pressure die cast Aluminium with polycarbonate front diffuser. The total power consumption should not exceed 10W (including driver). Including 3 core 1.5 sq.mm FRLS PVC insulated and PVC sheathed copper conductor cable and earthing etc. Up to suitable point complete all as specified and directed. Make: Philips Cat Part No ENDURALED BULKHEAD WT202W LED10S PSU or equivalent of Trilux/ Endo

S&F in replacement of suspended type decorative light with roundcylindrical head & double diffuser combination for creating beautiful pattern from light, combination of SS housing and Borosil Glass cover in Shinny copper finish. Fixture must comply with IEC-60598 Fixture should have min Dimensions 120x120x1850 (mm). fixture should be suitable for 1 x 20W max. E27 lamp with CCT 3000K complete all as specified and directed. Make: Philips Cat Part No 582013 PHILIPS Motif Mesh Cylinder E27 or equivalent of Trilux/ Endo

S&F in replacement of decorative wall mounted light with round semi cylindrical head, metalic housing in Chrome finish with Premium glass for reduced glare white shade. Fixture should have min Dimensions (mm) L= 120 mm W= 160mm H= 220mm. fixture should be integral type suitable for 1 x6W LED in IP44 lamp with CCT 3000K. Fixure must comply to IEC 60598-1, IS 10322 (Part5/Sec1). System delivered lumen 450lm & surge protection of Min. 2.5KV with WIDE VOLTAGE PROTECTION Range of : 160V-360V complete all as specified and directed. Make: Philips Cat Part No 581921 PHILIPS Jade 6W IP44 Wall Light WW or equivalent of Trilux/ Endo

S&F in replacement of Round Ring LED Fixtrure in 40W decorative suspended fixture having system lumen 2400 and efficacy of 60 lumen/watt. Housing made up of extruded Aluminum in Anodized silver finish with High efficiency non-yellowing micro prismatic diffuser. fixture having dia of 600 mm X H 55 mm. CCT : 4000K. Fixture must be with CRI 80 & THD ≤10%, Operating Voltage 140-270V & Surge 4 KV Internal complete all as specified and directed. Make: Philips Cat Part No SP682P 40W or equivalent of Trilux/ Endo

S&F in replacement of decorative wall mounted light with elongated round head & fixed arm, metalic housing in Bronze finish with Premium glass for reduced glare white shade. Fixture should have min Dimensions (mm) 200x140x380. fixture should be suitable for 1 x 20W max. E27 lamp with CCT 3000K complete all as specified and directed. Make: Philips Cat Part No 31434 Wall Light or equivalent of Trilux/ Endo

S&F in replacement of LED Symmetric Wide beam LED highbay luminaire with a housing of Pressure Die Cast Housing with engraved company name/Logo made from aluminum alloy. Unique Integrated Peanut Lens Optics Anti Dust Exposed Lens & Heat Proof Silicon Rubber for maintaining IP protection. The luminaire should have CRI 70 and CCT of 5700K and shall be compliant with IP65(no glue)/ IK07 protection. Luminaire shall be designed to emit at least 15000 nominal lumens with maximum system wattage of 105W at a system efficacy of atleast 140 lumen/watt. The luminaire (LED + Driver) shall be designed so as to ensure life class of 50k burning hours @ design ambient temp 35 deg C. The electronic driver should be potted & fully integrated with efficiency 85%. Power factor 0.95 and THD 10% with a minimum inbuilt surge protection of 4KV Internal and suitable for an operationg voltage range of 140-270V AC. The luminaire should have Class B Serviceability with Electrical Insulation of class 1. Driver case temp to be 80⁰C & suitable for working from -20⁰C to +55⁰C. LED Driver must comply to IS 15885 ( Part 2 / Sec 13 ). BIS certification for LED Luminaire is must , catalogue number of fixture offered must be mentioned in BIS certificate submitted. Luminaire manufacture shall provide LM79 report from NABL accredited lab & LM80 report issued by LED manufacturer complete all as specified and directed. Make: Philips Cat Part No BY515 or equivalent of Trilux/ Endo

S&F in replacement of flexible LED Strip light in 5mtr role. Strip must have 60led's/mtr & Min. cut length at 10cm. CCT should be 2700K with 1600lms /mtr & max power consumption of 15.5W/Mtr. Luminous efficacy /mtr should be min 102lm/W. Color consistency ≤3 & Lifetime (ta 25 C) @L70 to be 30,000hrs. Operating temp range -20~45 Deg C along with IP20 & IK03 protection. Ra =80; R9 = 0 with Class III protection complete all as specified and directed. Make: Philips/ Trilux/ Endo

S&F in replacement of Linear 1200 mm standalone fixture, Extruded Aluminium housing with HET diffuser with minimum system lumen 2500 and efficacy of 120 lm/W and width 50mm, P.F.0.95 with THD10% ,CCT 6500 K, CRI 80.The Useful life of fixture 50000 Hrs at L70. The Input voltage range shall be 140V to 270V .Fixture have Surge Protection 4kV complete all as specified and directed. Make: Philips Cat Part No SP780 H LED25S or equivalent of Trilux/ Endo

S&F in replacement of decorative wall mounted light Mirror Light, metalic housing in Metal & Aluminum Housing in bronze finish with Flexible neck for adjusting beam & Superior bronze finish. Fixture should have min Dimensions (mm) L= 800 mm W= 190mm H= 95mm. fixture should be integral type suitable for 1 x22W LED in lamp with CCT 3000K. Fixure must comply to IEC 60598-1, IS 10322 (Part5/Sec1). System delivered lumen 780lm & surge protection of Min. 2.5KV with WIDE VOLTAGE PROTECTION Range of : 160V-360V complete all as specified and directed. Make: Philips Cat Part No 581999 PHILIPS Muziris Bronze Pic Light 22W or equivalent of Trilux/ Endo

S&F in replacement of wall mounted light Mirror/picture Light, metalic housing in Metal & Aluminum Housing in bronze finish with Flexible neck for adjusting beam & Superior bronze finish. Fixture should have min Dimensions (mm) L= 500 mm W= 80mm H= 95mm. fixture should be integral type suitable for 1 x12W LED in lamp with CCT 3000K. Fixure must comply to IEC 60598-1, IS 10322 (Part5/Sec1). System delivered lumen 420lm & surge protection of Min. 2.5KV with WIDE VOLTAGE PROTECTION Range of : 160V-360V complete all as specified and directed. Make: Philips Cat Part No 31403 Muziris 12W Picture Light or equivalent of Trilux/ Endo

S&F in replacement of Led fixture 600mmX600mm 35W Recess Mounted with CRCA Housing & PS diffuser with having minimum system lumen 4200 and efficacy of 120lm/W. P.F.0.95,THD10%,CCT 6500 K ,CRI 80.Fixture must have min surge protection of 3.5KV & voltage range of 140-270V. The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70 complete all as specified and directed. Make: Philips Cat Part No RC380B or equivalent of Trilux/ Endo

S&F in replacement of decorative wall mounted light with 2X round head, metalic housing in White & Black finish in glass & glossy finish. Fixture should have min Dimensions (mm) 286x166x180mm. fixture should be suitable for 2x20W max. E27 lamp with CCT 3000K complete all as specified and directed. Make: Philips Cat Part No 31458 or equivalent of Trilux/ Endo

S&F in replacement of decorative wall mounted light with, Durable Aluminum Housing in Black finish. Fixture should have min Dimensions (mm) 78X87X43 mm. fixture should be integral type suitable for 1 x5W LED in IP65 lamp with CCT 3000K. Fixure must comply to IEC 60598-1, IS 10322 (Part5/Sec1). System delivered lumen 450lm & surge protection of Min. 2.5KV with WIDE VOLTAGE PROTECTION Range of : 160V-360V complete all as specified and directed. Make: Philips Cat Part No 582060 or equivalent of Trilux/ Endo

S&F in replacement of 13.5 W recessed mounted downlighter suitable for general lighting. Luminaire should have die cast heat sink with deep inset polycarbonate diffuser. The luminaire should have CRI 80 and CCT of 3000K/4000K. The luminaire shall be compliant with IP20 classification.The fixture should have a minimum system efficacy of 110 lumen/Watt and a minimum system lumen output of 2000 lumens. The luminaire shall be designed so as to ensure lumen depreciation of up to 30% over 50k burning hours @ design ambient temp 45 deg C. The electronic driver used shall have a power factor 0.95 , THD 10%. Luminare Operating Temp should be 0 Degrees to 45 Degrees & Input Voltage Range to be 140-270V with Driver Efficiency min 85% & Surge protection of 2.5 KV. Manufacturer shall have inhouse lab approved by NABL or ministry of science of govt of India. LM 79 and LM80 reports need to be submitted from a NABL/UL accredited lab to verify above parameters along with technical data sheets of product complete all as specified and directed. Make: Philips Cat Part No Green perform Sleek DN296C LED20S or equivalent of Trilux/ Endo

S&F in repair surface/suspended type slim linear LED light fitting 35-40 watt ,140-270 Volt,50HZ,made of CRCA with high transmitivity diffuser of PC,THD=10% and PF = 0.95 and surge protection of 4 KV,fixture must have LV/HV protection including necessary wire for its connection complete all as specified and directed. Make: Philips Cat Part No SP095V LED40S or equivalent of make as specified in PS.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter round shape of 15 W PDC housing for enhanced life and continuous operation complete all as specified and as directed.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter square shape of 15 W PDC housing for enhanced life and continuous operation complete all as specified and as directed.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter round shape of 12 W PDC housing for enhanced life and continuous operation complete all as specified and as directed.

S&F in replacement of aesthetically designed ceiling/surface circular shaped decorative LED downlighter round shape of 09 W PDC housing for enhanced life and continuous operation complete all as specified and as directed.

S&F in replacement Recessed mounting 36 Watt 2'x2' full glow essential LED panel fitting luminaire with high transmitive diffuser suitable for indoor space and fix in existing POP including cutting/grouting of existing POP and get electrically connected the fitting with switch board for suitable size of PVC copper wire complete all as specified and directed.