Military Engineer Services Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Military Engineer Services - MES Tender
Civil And Construction
Pipe Line Project
Eprocure
Opening Date4 Sep 2024
Closing Date25 Sep 2024
Tender Amount₹ 36,98,000
Costs
EMD
₹ 73,980Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_670803_1Bid Award Id
ViewTender No
GE/SW-52/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Taking up existing CI/ DI Pipe water mains incl fittings and relaying, jointing and testing of same in to trenches in position after cleaning and removal of scale/blockage complete for the following sizes:-
(Note- Lead joint shall be measured and paid separately)
-
-
-
80 mm bore
10
-
-
100 mm bore
10
-
-
Supply, laying, jointing and testing of DI Pipe with spigot & socketed end, centrifugally cast, Class LA, push on joint with jointing material as rubber ring laid in trenches in old/ new route as required at site including taking down the old/ unsv pipe line complete all as specified & directed of following sizes (Make - Electrosteel / Jindal / Kesoram / IISCO / Electrotherm / Tata) (Note: Excavation and earth work shall be measured and paid separately under respective items of schedule):-
-
-
-
80 mm dia
10
-
-
100 mm dia
10
-
-
Supply, laying, jointing and testing of DI Pipe 150 mm dia with flanged end vertically/centrifugally cast, Class A, with jointing material such as rubber gasket and nut bolts etc laid in trenches/floor/wall in old/ new route as required at site including taking down the old/ unsv pipe line complete all as specified & directed of following sizes (Make - Electrosteel / Jindal / Kesoram / IISCO / Electrotherm / Tata) (Note: Excavation and earth work shall be measured and paid separately under respective items of schedule):-
3
-
-
Material & Labour in replacement of CI/DI fittings, ISI marked, bends (any type, radius & angle) tapers any type (straight, bend, increasing decreasing or double socket etc) tee piees, single branch, 'Y' junction, double branch cross (socket & spigot or flanged) collars, caps & plugs for spigot socketed pipes upto 150 mm bore complete.
300
-
-
Material & Labour for run lead joint incl jointing material for CI/DI pipe for following sizes including burning & removing old lead joint complete:-
-
-
-
80mm dia
2
-
-
100mm dia
3
-
-
150 mm dia
2
-
-
Material & Labour in replacement of CI Sluice Valve of pressure class PN-1.6 type flanged and drilled at both ends, conferming to ISI mark and having gun metal spindle and rings including wheel for operating all as specified including two numbers flanged socket and jointing materials such as bolts, nuts, washers, rubbers/ fibre board gasket including taking down old unserviceable valve from pipe line of both ends complete of following sizes:-
-
-
-
80 mm dia
1
-
-
100 mm dia
1
-
-
150 mm dia
1
-
-
200 mm dia
1
-
-
Supplying, fixing and testing of double flanged butterfly valve of PN 1.6 rating, CI, gear/hand lever operated, with soft seated wafer, bronze/ gunmetal seat and ss 304 shaft duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes complete all as specified and directed of following sizes as required:-
-
-
-
50 mm dia
1
-
-
100 mm dia
1
-
-
150 mm dia
2
-
-
200 mm dia
1
-
-
Cutting of existing CI / DI pipe 100 mm dia for insertion of CI specials / valves etc. all as required including dewatering of leakage water etc complete for the following sizes:-
2
-
-
Supply, laying, jointing & testing for replacement of GI Pipe, medium grade, including all fittings in old/new position, laid in trenches/ wall including taking down the old/unsv pipe line complete all as specified & directed of following sizes:-
(Note: Excavation and earth work shall be measured and paid separately under respective items of schedule):-
-
-
-
80 mm dia
5
-
-
50 mm dia
100
-
-
40 mm dia
80
-
-
25 mm dia
100
-
-
20 mm dia
200
-
-
15 mm dia
200
-
-
Drilling and tapping cast iron/GI water mains (in position) for branch connections of 15 mm bore to 25 mm bore including necessary fittings and mild steel brackets complete.
2
-
-
S&F in repair heavy duty Brass forged Ball valve 2 way, screwed down high pressure 25 Kg/Cm2 with iron lever type handle, screwed both ends complete for the following sizes of pipes:-
-
-
-
50 mm dia
4
-
-
40 mm dia
4
-
-
25 mm dia
6
-
-
20 mm dia
6
-
-
15 mm dia
6
-
-
S&F in repair direct on line starter 415 volt, 50 Hz with voltmeter, Ammeter, relay, timer and single phase preventor complete for following pump set capacity (Make -L&T/ BCH) :-
-
-
-
3 to 5 HP Pump Set
2
-
-
7.5 HP Pump Set
2
-
-
S&F in repair CI non return valve, wafer/swing/disc type, heavy duty, 80 mm dia, class PN-1.6 flanged end complete.
2
-
-
S&F in repair CI non return valve, wafer/swing/disc type, heavy duty, 100 mm dia, class PN-1.6 flanged end complete.
2
-
-
S&F in repair CI non return valve, wafer/swing/disc type, heavy duty, 150 mm dia, class PN-1.6 flanged end complete.
2
-
-
Supply and fixing in repair heavy duty CI Stainer 150 mm dia, class 1.6, flanged end complete.
2
-
-
Supply and fixing in repair heavy duty cast iron foot valve flanged type 200 mm dia, pressure 250 PSI with jointing material such as rubber gasket, nut bolts and washers complete.
2
-
-
Supply and fixing in repair heavy duty cast iron foot valve flanged type 100 mm dia, pressure 250 PSI with jointing material such as rubber gasket, nut bolts and washers complete.
2
-
-
Supply and fixing in repair heavy duty cast brass foot valve screw type 50 mm dia, pressure 250 PSI complete.
2
-
-
Suppy only liquid chlorine suitable for water treatment by mannual methed HDPF in 50 litre drum (Make : Davis Chemical/ Prothamesh Trading/ Aditya birla) (Note:- Fresh lot of liquid chlorine shall be supplied with in 45 Days from the date of manufacturing as per monthy demand or as directed
800
-
-
Supply only bleaching powder Calcium Hypochloride minimum 32% cholorine as per IS-1065:1989 in 25 Kg Bag (Make : Raj/Cambal/DCM/Aditya Birla/Rajendra chemical/RS dye/Kalyani/Guru Kirpa Traders) (Note:- Fresh lot of bleaching powder shall be supplied with in 45 Days from date of manufacturing as per monthy demand or as directed)
60
-
-
Supply of dry Chlorine granuales with 90% purity,chemical grade in 25 Kg bag (Note:- Fresh lot of bleaching powder shall be supplied with in 45 Days from date of manufacturing as per monthy demand or as directed)
500
-
-
Material & Labour for replacement of industrial copper conductor submersible cable, PVC insulated and PVC sheathed cable, 1100 volt grade of size 4 sqmm x 3 core.
200
-
-
Taking up submersible pump set upto 3 to 10 HP with MS/GI column pipe from borewell and lowering the same after repairing with electric connection complete all as directed.
4
-
-
Cleaning of underground/semi underground sump by taking out all sludge, silt from bottom and cleaning all inside walls with wire brush and brooming the walls and top ceiling/roof including washing the walls with fresh water mixed with bleaching powder and draining out complete sludge, silt etc from bottom of the sump and applying one coat of lime wash for the UG sump of capacity upto 25,000 gallons complete all as directed.
4
-
-
Cleaning of RCC OH tank, by taking out all sludge, silt from bottom and cleaning all side walls with wire brush and brooming the walls and ceiling/roof including washing the walls with fresh water with bleaching powder and draining out complete sludge, silt etc from bottom of the tank and applying one coat of lime wash inside complete for walls and roof/ceiling for the capacity upto 25000 gallon of approx staging 15 mtr.
1
-
-
Material and labour for repair of inside wall and bottom of RCC overhead tank capacity 25000 gallons with using chisel and remove the loose pieces of matter surrounding the cracks and filling the cracks by hydraulic cement mixture with appropriate concrete binding agent chemical/ Dr fixit Coal Tar Epoxy and Coating complete inner side with instant leak stop waterproofing chemicals/compound , ISO 9001:2015 & ISO 14001:2115 to stop the water leakage from RCC overhead tank Dome and removing all debris from the tank dom and testing complete.
1
-
-
Material & Labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron strip of size 32 x 6 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil complete all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete all as specified and directed.
2
-
-
Material & Labour for replacement of steel shaft of centrifugal pump 5 to 10 HP including dismantling, opening and refixing the same on its original location all as specified and directed.
1
-
-
Material & Labour for replacement of steel shaft of centrifugal pump 15 to 20 HP including dismantling, opening and refixing the same on its original location all as specified and directed.
1
-
-
Dismantling of pump set 5 HP to 20 HP from rusted base frame and refixing the same on new base frame complete. (Note: MS base frame will be measured & paid seperately)
1
-
-
Material & Labour for replacement of base frame of Cetrifugal pump set 7.5/10 HP pump set made out of MS channel MC 100 & mounting fabricated by MS channel MC 75 to match with existing frame in size & shape incl cutting ,welding,grinding and civil work for grounting with PCC 1:2:4 and dismantling & taking down pump set and re-fixing the same on new base frame complete all as directed.
1
-
-
Material & Labour for replacement of base frame of Cetrifugal pump set 15/20 HP pump set made out of MS channel MC 100 & mounting fabricated by MS channel MC 75 to match with existing frame in size & shape incl cutting, welding, grinding and civil work for grounting with PCC 1:2:4 and dismantling & taking down pump set and re-fixing the same on new base frame complete all as directed.
1
-
-
Material & Labour for replacement of self priming mono block pump with motor 1 HP with in-built thermal overload protector complete all as specified & installation in repair of centrifugal pump having discharge not less than 80 Ltr per minute, Head-not less than 10 mtr m, 1400/1500, single phase, 230 volt including all connection and testing complete all as specified & directed.
2
-
-
S&F in repair of good quality tyre rubber coupling suitable for 5 to 10 HP pump set (Make- Unique/Form-Flex/HIC/Mahalaxmi/Metro)
2
-
-
S &F in repair of good quality tyre rubber coupling suitable for 15 to 20 HP pump set (Make- Unique/Form-Flex/HIC/Mahalaxmi/Metro)
5
-
-
Dismanlting and disconnection from motor and water connection of the pump and transport to work shop & opening carefully and servicing complete with replacing of bushes, gland packing, ball bearing, rubber gasket, nut and bolt and re-fixing it in original position and making out all electrical and water connection incl painting to two coats with synthetic enamell paint after necessary prepartion incl testing & commissioning complete for following capacity:- (Note:- Replacement of impellor rewinding of motor shall be measured and paid separately)
-
-
-
7.5 to 10 HP
3
-
-
15 to 20 HP
5
-
-
75 HP
2
-
-
Dismanlting and disconnection from pump and electric connection of the motor and transport to work shop & opening carefully and Material & Labour for rewinding of electrical motor, 3 phase with super enamelled copper winding wire of existing gauge and size to get proper speed on load with removing burnt winding wire and reassebling and refixing the same on original foundation for following capacity of motor:-
-
-
-
7.5/10 HP
1
-
-
15 to20 HP
2
-
-
75 HP
1
-
-
Taking out submersible pump set 3 to 10 HP including column pipe and electric cable from borewell ( depth upto 50 mtr) complete by chainpully or other method and lowering the same in existing borewell after repair work all as specified. Note: The rate of T&P shall be included in quoted rate
2
-
-
Dismanlting and disconnection from motor and water connection of submersible pump and transport to work shop & opening carefully and servicing complete with replacing of unsv parts such as bushes/ ball bearing, rubber gasket,stop ring,washer shaft sleeve,stop plate nut and bolt and re-fixing it in original position and making out all electrical and water connection incl painting to two coats with synthetic enamell paint after necessary prepartion incl testing & commissioning complete for following capacity:- (Note:- Replacement of impellor/shaft and rewinding of motor shall be measured and paid separately) for following capacity:-
-
-
-
3 to 5 HP
1
-
-
10 HP
1
-
-
Dismanlting and disconnection from sumersible pump and electric connection of submersible motor and transport to work shop & Material & Labour for rewinding of submersible motor with PVC insulated copper winding wire of existing gauge and size to get original/proper speed and testing including reassebling of motor with submersible pump complete for following capacity:-
-
-
-
3 to 5 HP
2
-
-
10 HP
2
-
-
Testing of Bore well water/ Raw water/STP Water/Clear Water to analyse the following parameters as per IS 10500:2000 through Govt. approved laboratory:-
a) Physicochemical parameters of water / eflluent sample
b) Bactoriological test of water sample.
c) Metals ( Except Hg, As & Se).
d) Pesticides.
16
-
-
Flushing of existing borewells of size 150 mm dia, 150 Mtrs depth with drilling compressor including surging and flushing the bore at a pressure of 7 Kg / Sq cm complete with compressed air and flushing the sand, mud etc from the bore well till discharge of the fresh water, including testing of water samples for chemical and bacteriological tests and yield testing for 8 hours complete all as specified and directed.
8
-
-
Material & Labour for replacement of stainless steel wire rope (ss-304) size 8 mm dia with 2 nos holding clamps suitable for hanging of submersible pump complete all as directed.
30
-
-
Material & Labour for cutting of road/path (width-25 cm x 40 cm) for laying of pipe line and making good to disturbed road/path including provision of PCC 1:2:4 type B-1 using 20 mm graded stone aggregate all as specified.
10
-
-
Material & Labour for spray painting of complete water pumpset of cap 3 to 10 HP with two coats of synthetic enamelled paint of specified colour after preparation of surface.
3
-
-
Material & Labour for spray painting of complete water pumpset of cap 15 to 25 HP with two coats of synthetic enamelled paint of specified colour after preparation of surface.
1
-
-
Material & Labour for spray painting of complete water pumpset of 75 HP with two coats of synthetic enamelled paint of specified colour after preparation of surface.
1
-
-
Supply only high range Chlorine Test Kit with coloured sample complete with all testing fitment and OT solution in plastic finish box complete (Make : Aquafit / Aquasol)
4
-
-
Supply only Total Hardness Test Kit (5-1000 Mg/L) with coloured sample with all testing fitment and OT solution in plastic finish box complete (Make : Aquafit / Aquasol)
4
-
-
Supply ony handy medi kit first aid plastic box having medicine /first aid items as first Aid Leaflet, Scissor S.S, Savion 50 ml,Cotton, Bandaid (Adhesive strip), thermometer, Burn Ointment, Nitrofurazone Creame U.S.P/Neomycin, Cotton Crepe Bandage. Paracetamole Tab. I.P ,Merbromin Solution (20 ml), Sterile Guage swab (5cmx5cmx12 ply),Paper Adhesive Tape, Rolled Guage(6cmx2.5mtr),Rolled Guage(7.5cmx2.5mtr), Eye wash cup (plastic), Measuring cup(plastic), Disposable Glove, Dropper Plastic,Set of safety pine, Triangular Bandage, Blade.
3
-
-
Material & Labour for painting of water supply pipes networks of 80/200 mm dia consisting of valves any type/ size at various pump houses inlcuding duly scrapping thoroughly the existing corroded paint / dirt/ dust / rust and preparing the surface and applying two coats of synthetic enamel paint over a coat of red oxide primer as per the colour code and marking the water flow directions on pipe lines as directed.
50
-
-
Collecting water sample in clean bottle from borewell/ UG sump/service tank and getting Chemical, Boilogical, Potability Testing of water sample (as per IS 10500:2012) at Govt recognised/approved institute/Lab for potability and chemical analysis complete all as specified & directed
8
-
-
Material & Labour in repair auxiliary contactor 415 Volt, 18/20 amps, coil voltage 230 Volt including auxiliary block (1 NO + 1 NC) and over load relay complete.
1
-
-
S&F in repair 3 pole power contactor, type MNX-32 with coil voltage 230 Volt incl connection complete.
2
-
-
S&F in repair front mounting add-on auxiliary contact block with 1 NO+1 NC suitable for MNX contactor 32/40 Amp.
1
-
-
All as per item No 59 but with 2 NO+2 NC
1
-
-
S&F in repair heavy duty electric motor terminal block 40 to 50 amp, 415 Volt for 40 HP motor complete (Make-Elmex/Wago/Phoenix)
1
-
-
S&F in repair heavy duty electric motor terminal block 25 to 40 amp, 415 Volt for 40 HP motor complete (Make-Elmex/Wago/Phoenix)
1
-
-
Material and Labour for cleaning of Swimming Pool including cleaning of inside and bottom tiles of swimming pool pond ( Length-23 Mtrx Width-14.5 Mtrx Depth- from 1.2 Mtr to 3.5 Mtr in slop) by tile cleaner chemical with soft brush and washing the walls /bottom with fresh water and draining out complete sludge, silt, waste material etc from bottom of swimming pool pond and trrown away 50 Mtr from Md/OTM Accn all as directed.
1
-
-
Material and labour for replacing the filter media of swimming pool filteration tank ( Make-Aqua Whizz, Model-AQW 2000, Filter Area-3.14 Sq Mtr, Filter capacity -157Cum/Hour with fresh Antracite,Sand and Garnet etc all as directed.
1
-
-
S&F in repair of electronic timer ST 100 for starter of pump set complete.
1
-
-
Supply only for replacement of asbestos gland rope of required size for water pumps complete.
3
-
-
S&F in repair of Analog type pressure gauge for monitoring of flow, 0-14 kg/cm2,100mm dia all as specified and directed (Make:- Fiebig/H guru/kanti/ Cubix/Super fasteners)
3
-
-
S&F in repair of Analog type pressure gauge for monitoring of flow ,0-21 kg/cm2,150 mm dia all as specified and directed (Make:- Fiebig/H guru/kanti/ Cubix/Super fasteners)
2
-
-
Material & Labour for replacement of feeding pump set, monoblock type, 0.5 HP, 240 Volt, 2800 RPM complete (Make- CRI/ Siemens/ Crompton/ ABB/ KSB)
1
-
-
Supply only in repair rubber gasket 3 mm thick with holes for flanged pipe/sluice valve of size 80 to 200 mm dia all as specified and as directed.
12
-
-
M&L for taking out/ collected empty Fire Extinguisers of any type and capacity from various locations send to authorized distributor for refilling and re-fixing the same in proper position and location as per the requirement of the location and type of fire extinguisher in and including transfortation complete all as specified and as directed.
13
-
-
Refilling of fire extinguishers with ABC dry chemical powder and pressurization of fire extinguisher with fresh/sufficient quantity/quality, ABC Dry chemical powder as per IS: 14609:1999 and shall contain 90% Mono Ammonium Phosphate and pressurized with Nitrogen Gas in and including painting the cylinder, labeling/marking with date of refilling and expiry date of refilling as per the ISI standards and as per the norms of Fire Authorities, a dry chemical Hydraulic Pressure testing should be as per IS-2190-2010 and test certificate shall be submitted and shall be valid for further three years complete all as directed of following capacity cylinders: Note: Any fire extinguiser cylinder will be failing in hydrolic test will be return in AGE E/M Cab Sectt yard and nothing extra will be paid for its to the contractor.
-
-
-
a) 10 Kg ABC Powder type Fire Extinguisers
1
-
-
a) 6 Kg ABC Powder type Fire Extinguisers
6
-
-
Refilling of fire extinguishers with Carbon dioxide (CO2) and pressurization of fire extinguisher with fresh/sufficient quantity/quality, Carbon dioxide shall be as per IS: 15222:2002 with minimum gas purity shall be 99.5 % in and including painting the cylinder, labeling/marking with date of refilling and expiry date of refilling as per the ISI standards and as per the norms of Fire Authorities, Carbon dioxide fire extinguishers shall be tested as per IS: 5844-1970 and test pressure shall be 250 kg/ cm2 (as per the IS 2190:2010 ) and test certificate shall be submitted and shall be valid for further five years complete all as directed of following capacity cylinders:- Note: Any fire extinguiser cylinder will be failing in hydrolic test will be return in AGE E/M Cab Sectt yard and nothing extra will be paid for its to the contractor.
-
-
-
a) 4.5 Kg Carbon dioxide (CO2) type Fire Extinguisers
1
-
-
a) 2 Kg Carbon dioxide (CO2) type Fire Extinguisers
5
-
-
Refilling of fire extinguishers 9 kg with water CO2 type and pressurization of fire extinguisher with fresh/sufficient quantity/quality, Carbon dioxide shall be as per IS: 15222:2002 with minimum gas purity shall be 99.5 % in and including painting the cylinder, labeling/marking with date of refilling and expiry date of refilling as per the ISI standards and as per the norms of Fire Authorities, Carbon dioxide fire extinguishers shall be tested as per IS: 5844-1970 and test pressure shall be 250 kg/ cm2 (as per the IS 2190:2010 ) and test certificate shall be submitted and shall be valid for further five years complete all as directed of following capacity cylinders: Note: Any fire extinguiser cylinder will be failing in hydrolic test will be return in AGE E/M Cab Sectt yard and nothing extra will be paid for its to the contractor.
2
-
-
Refilling of fire extinguishers 9 Kg with AFFF foam type and pressurization of fire extinguisher with fresh/sufficient quantity/quality, AFFF Foam as per IS: 4989 and shall contain with 95% effective discharge and 15 Kgf/cm² chare pressure in and including painting the cylinder, labeling/marking with date of refilling and expiry date of refilling as per the ISI standards and as per the norms of Fire Authorities, Hydraulic Pressure testing should be as per IS-2190-2010 and test certificate shall be submitted and shall be valid for further three years complete all as directed of following capacity cylinders: Note: Any fire extinguiser cylinder will be failing in hydrolic test will be return in AGE E/M Cab Sectt yard and nothing extra will be paid for its to the contractor.
2
-
-
Supply & fixing in replacement of U/S discharge valve wheel type with working pressure 158 Kg/cm² confirming to IS: 3224 suitable for CO2 type fire extinguishers of capacity 4.5 Kg and 2 Kg
2
-
-
Supply & fixing in replacement of U/S discharge hose made out of wire braided rubber of ID 10mm and 1 mtr long, confirming to IS: 3224 suitable for CO2 type fire extinguishers of capacity 4.5 Kg and 2 Kg
2
-
-
Supply & fixing in replacement of U/S discharge horn made out of figer glass/pholyethylene, non- conductor of electricity with suitable handle, confirming to IS: 3224 suitable for CO2 type fire extinguishers of capacity 4.5 Kg and 2 Kg
2
-
-
Supply & fixing in replacement of U/S taflon/nylon washer with OD-19mm, ID- 9mm and thichness 3mm
3
-
-
Supply & fixing in replacement of U/S squeeze grip type valve, heavy duty with MS control handle and ss lock/pull pin with chain confirming to IS: 15683 (2006) suitable for ABC type fire extinguishers of capacity upto10 Kg
2
-
-
Supply & fixing in replacement of U/S discharge wire braided rubber hose with brass shut off nozzle, length of the flexiblehose not less than 400mm, confirming to IS: 15683 (2006) suitable for ABC type fire extinguishers of capacity upto 10 Kg
2
-
-
Supply & fixing in replacement of U/S analog type spring brass fire extinguisher pressure gauge, 1" dial suitable for measuring 0 to 50 bar duly calibrate by standard method confirming to IS: 15683 (2006) suitable for ABC type fire extinguishers of capacity upto 10 Kg
2
-
-
Supply only flexible PVC nylon braided transparent hose pipe 15 mm dia
60
-
-
Supply only in replacement GI Elbow for 15 mm bore pipe.
50
-
-
Supply only in replacement GI Elbow for 20 mm bore pipe.
50
-
-
Supply only in replacement GI Elbow for 25 mm bore pipe.
50
-
-
Supply only in replacement GI Elbow for 40 mm bore pipe.
20
-
-
Supply only in replacement GI Elbow for 50 mm bore pipe.
10
-
-
Supply only in replacement GI Unoin for 15 mm bore pipe.
40
-
-
Supply only in replacement GI Union for 20 mm bore pipe.
40
-
-
Supply only in replacement GI Union for 25 mm bore pipe.
40
-
-
Supply only in replacement GI Unoin for 40 mm bore pipe.
10
-
-
Supply only in replacement GI Unoin for 50 mm bore pipe.
20
-
-
Supply only in replacement GI Equal Tee for 15 mm bore pipe.
10
-
-
Supply only in replacement GI Equal Tee for 20 mm bore pipe.
10
-
-
Supply only in replacement GI Equal Tee for 25 mm bore pipe.
10
-
-
Supply only in replacement GI Equal Tee for 40 mm bore pipe.
4
-
-
Supply only in replacement GI Equal Tee for 50 mm bore pipe.
6
-
-
Supply only in replacement GI Reducer for 50x40 mm bore pipe.
5
-
-
Supply only in replacement GI Reducer for 40x25 mm bore pipe.
5
-
-
Supply only in replacement GI Reducer for 25x20 mm bore pipe.
15
-
-
Supply only in replacement GI Reducer for 20x15 mm bore pipe.
15
-
-
Supply only in replacement GI socket for 15 mm bore pipe.
100
-
-
Supply only in replacement GI socket for 20 mm bore pipe.
100
-
-
Supply only in replacement GI socket for 25 mm bore pipe.
25
-
-
Supply only in replacement GI socket for 40 mm bore pipe.
20
-
-
Supply only in replacement GI socket for 50 mm bore pipe.
25
-
-
Supply only in replacement GI Nipple 15 mm bore dia x 100 mm long made out of medium grade pipe.
100
-
-
Supply only in replacement GI Nipple 20 mm bore dia x 100 mm long made out of medium grade pipe.
100
-
-
Supply only in replacement GI Nipple 25 mm bore dia x 100 mm long made out of medium grade pipe.
50
-
-
Supply only in replacement GI Nipple 25 mm bore dia x 150 mm long made out of medium grade pipe.
50
-
-
Supply only in replacement GI Nipple 40 mm bore dia x 150 mm long made out of medium grade pipe.
15
-
-
Supply only in replacement GI Nipple 50 mm bore dia x 150 mm long made out of medium grade pipe.
20
-
-
Supply of in replacement GI Plug 15 mm dia, externally threaded
10
-
-
Supply of in replacement GI Plug 20 mm dia, externally threaded
10
-
-
Supply of in replacement GI Plug 25 mm dia, externally threaded
10
-
-
Supply only in replacement Apex silicon white tafelon sealing tape (PTFE Tape) 15 mm wide x 10 mtr long
100
-
-
Supply only 18 inch wall brush complete with handle with poly bristles, pool wall brushes for scrubbing pool walls and removing debris
8
-
-
Supplying only 18 inches algae pool brush head strong 18inch aluminium handle swimming pool cleaning algae brush with EZ clips
6
-
-
Supply only twisted manila rope jute rope 1oo feet natural jute twine hemp rope 3/4 inch diameter twine burtlap rope complete all as specified.
2
-
-
Supply only eva spiral hose pipe 1/2 inch for pool
10
-
-
Supply only garbnoire heavy duty 3 layered braded water hose pipe sixe 1 inch used for gardening pipe oudoors with hose connector and clamps.
12
-
-
Supply, Installation, lowering, testing and commissioning submersible pumping set having discharge capacity 180 LPM at 110 mtr head complete with submersible motor of suitable 7.5 HP, 3 Phase 415 volt and connecting to column pipe by means of nipple/ reducer complete all as specified and as directed by Engr-in-Charge.
1
-
-
Supply, Installation, lowering, testing and commissioning submersible pumping set having discharge capacity 180 LPM at 110 mtr head complete with submersible motor of suitable 5 HP, 3 Phase 415 volt and connecting to column pipe by means of nipple/ reducer complete all as specified and as directed by Engr-in-Charge.
1
-
-
Supply, Installation, lowering, testing and commissioning submersible pumping set having discharge capacity 180 LPM at 110 mtr head complete with submersible motor of suitable3 HP, 3 Phase 415 volt and connecting to column pipe by means of nipple/ reducer complete all as specified and as directed by Engr-in-Charge.
1
-
-
M&L for servicising of Water Cooler/Water dispenser of Capacity 20/40/80, 60/120,150/180 Ltrs and cleaning of cooling coil, condensing coil, air filters, compressors, fan motor etc with vacuum cleaner or cleaning solution complete all as specified and as directed by Engr-in-Charge.
30
-
-
Supply and fixing in replacement of Starting relay with over load protector suitable for 40 to 150 Ltr capacity of water cooler. (Make: Sri Ram/Renutrol/Micro Tech)
10
-
-
Supply and fixing in replacement of Self closing chromium plated self closing push taps for water cooler Capacity 40/80,60/120, 150/180 Ltr. (Make: Usha/Prayag/ Cera/ Essco)
12
-
-
Taking out the existing unserviceable compressor of any make from water cooler storage type capacity 40 to 150 Ltrs from any location and supply installation & testing of new sealed unit compressor of similar capacity in same location alongwith test Certificate from manufacturer and cleaning of condenser by machine doing vaccum on the fully system and supply and charging of oil gas and other necessary lubricants including reconnecting the electric and water connections, transportaion & testing complete all as directed by Engr-in-Charge. (Make Tecumseh/Emerson/LG.)
8
-
-
Supplying and fixing in replacement of condenser fan motor 1/8 to 1/32 HP from water cooler cap.40 to 150 Ltr including the electric connections complete and testing complete all as directed by Engr-in-Charge. (Make : AUE, Crompton Greaves / Cool Master)
7
-
-
Supplying and fixing in replacement of evaporator/condensing coil of water cooler capacity upto 150 Ltrs as per existing size and pattern, and refixing in same position complete all as specified & as directed by Engr-in-Charge.
7
-
-
M&L for servicing of Refrigerator/Deep freezer of Capacity upto 550 Ltrs with cleaning of cooling coil, condenser coil, compressors, with vacuum cleaner or cleaning solution including checking the serviceability of electrical/electronic circuits relays, wiring kit, thermostat switches knobs, etc., complete all as specified and as directed by Engr-in-Charge.
12
-
-
Supply and fxiing in replacement following new spare parts of Refrigerator/Deep freezer upto 550 Ltrs capacity:-
-
-
-
Starting relay 1/6 to1/8 H.P Open type with O.L.P. ( Make :- Renutrol/ Sri Ram/ Microtech).
2
-
-
Vegetable tray PVC for Refrigerator upto 550 Ltr capacity
8
-
-
Defrost/waste water drain tray for refrigerator/Deep frezer upto capacity 550 Ltr suitable for Whirlpool/ LG/ Samsung/ Godrej
2
-
-
PVC ice tray 14 cube flexible type suitable for refrigrator upto 550 Ltr Whirlpool/ LG/ Samsung/ Godrej .
4
-
-
Fridge/Defreezer door switch compatable with any make and capacity of fridge/defreezer
1
-
-
Freezer door for refrigrator upto 550 Ltr capacity suitable for Whirlpool/ LG/ Samsung/ Godrej make Refrigerator.
2
-
-
Door Lock for refrigerator/Deep freezer upto 550 ltrs suitable for Whirlpool/ LG/ Samsung/ Godrej make Refrigerator.
5
-
-
Interior light fittings with bulb suitable for Whirlpool/ LG/ Samsung/ Godrej make Refrigerator/Deep freezer.)
5
-
-
Door handle suitable for refrigerator upto 550 Ltrs suitable for Whirlpool/ LG/ Samsung/ Godrej make Refrigerator.)
5
-
-
Refrigerator Glass shelves of capacity upto 550 Ltrs suitable for Whirlpool/ LG/ Samsung/ Godrej make Refrigerator.)
8
-
-
Unbreakable 14 grid Egg tray for fridge
2
-
-
Refrigerator/Deep freezer front/main door gasket
2
-
-
Fridge/Defreezer door switch compatable with any make and capacity of fridge/defreezer
2
-
-
Refrigerator/Deep freezer defrost timer button
1
-
-
Fridge/Deep fidge glass shelves bracket stainless steel silver matt finish adjustable type compatable for any make of fridge/deep fridge
1
-
-
Refrigrator wire shelf comptiable for any make and upto capacity of 550 Ltr fridge
1
-
-
Disconnecting from mains and taking down the unserviceable compressor unit of Refrigerator/Deep freezer of any make and type and providing New Compressor suitable for capacity upto 550 Ltr alongwith test certificate from manufacturer including filling of refrigrant gas and compressor oil complete all as directed by Engineer-in-Charge. (Make :Tecumseh/LG/Godrej.)
Note:- The rates quoted by the contractor shall deemed to include the transportation cost from site of installation to contractor's repair workshop and back.
4
-
-
Supply & fixing in replacement of evaporator coil/freezer coil made out of aluminium press type of capacity 165 to 550 ltr with freezer frame and door including connection, complete all as specified & as directed. (Make - Whirlpool/Godrej/Kelvinator/LG/Sumsung.)
4
-
-
Taking down desert cooler of any type (Steel body/Plastic body) and any capacity from any height / floor and refixing the same in same location including servicing/repair work/ overhauling and greasing of moving parts all as required at site.
25
-
-
Preparation for old painted surface of desert cooler of any capacity and any make on inner surface & outer surface. Repainting the complete desert coolers ie side panel, bracket, body & desert cooler stand with two coats of synthetic enameled paint (1st grade quality) including two coats of black water proof paint on reserve water tank & marking with “ Cabinet Sectt( TAG )” letter size of 50mm height in stencil in black/white complete all as per site requirement.
25
-
-
Supply and fixing in repairs wood wool pad (set of three) approximate weight 800 - 900gms of size 24” sweep desert cooler as per existing complete all as specified and directed.
25
-
-
Supply and fixing in repairs submersible pump motor 230 Volts , single phase, AC suitable for Plastic body/Steel body Desert cooler complete all as specified & as directed. (Make- Bajaj/ Crompton/ Khaitan.)
25
-
-
Supply and fixing in repairs of copper wounded fan motor Kit assebly with blade, heavy duty complete of capacity 180 Watt,220 volts, 50 Hz, 1400 RPM , 500 mm sweep suitable for desert cooler complete all as specified & as directed. (Make Khaitan/ USHA/ Crompton Greaves/Bajaj.)
5
-
-
Supply and fixing in repairs front grill for desert cooler of approved make complete with 5 Amp switch, three speed regulator including indicator lamp complete all as specified and directed.
8
-
-
Supply & fixing in repairs GI wire mesh for desert cooler pad (Set of Three).
8
-
-
Supply & fixing in repairs PVC pipe for connecting pump and water distributor of size 15 mm upto 75 cm long complete all as specified & as directed. (Mnake:- Prayag/ Supreme/ Prince).
5
-
-
Supply & fixing in repairs PVC elbow for desert cooler of suitable size complete all as specified & as directed.
10
-
-
Supply & fixing in repairs PVC 4 Way distribution cross for desert cooler complete all as specified & as directed.
10
-
-
S&F in repairs desert coolers ABS fan blade of 18 inch /20 inch sweep of plastic body complete all as specified & as directed..
5
-
-
Supply and fixing in repairs cooler fan motor heavy duty mounting steel legs with PVC bracket sets (Set of 4) made up as existing including painting complete all as specified and directed.
2
-
-
Supply and fixing in replacement of electronic voltage stabilizer input voltage 170-270 V and out put voltage 230 volts suitable for 1.5 Ton Window/Split type Air Conditioner. Make- V Guard/ Microtek/ Syspro/ Patron/ Candes
10
-
-
Supply and fixing in replacement of voltage stabilizer input voltage 170-270 and out put voltage 230 volts suitable for 2 Ton Window/Split type Air Conditioner. Make- V Guard/ Microtek/ Syspro/ Patron/ Candes
3
-
-
Supply and fixing in replacement of electronic voltage stabilizer input voltage 170-270 and out put voltage 230 volts ,Capacity 4 KVA suitable for water cooler upto 150 LPH. Make- V Guard/ Microtek/ Syspro/ Patron/ Candes
3
-
-
S&F in repair Plug top, 3 pin, 05 amps, 230 volt complete.
30
-
-
S&F in repair Plug top, 3 pin, 15 amps, 230 volt complete.
60
-
-
M&L for servicing of window type AC of 1.0/1.5/2.0 TR capacity, of any type/make, at site /wall, comprising of taking down carefully, removing power connections and front PVC grills, air filters, cleaning, washing, removing dirt, servicing including chemical wash of cooling coil, indoor cooling unit and condenser coil and providing oil and grease to all moving parts including condensing motor, checking and making electrical connection with thimble testing & commissioning including refixing at the original position and all as specified and as directed.
25
-
-
M&L for servicing of split type AC of 1.5/2.0 TR capacity, of any type/make, at site /wall, removing front PVC grills, air filters, cleaning, washing, removing dirt, servicing including chemical wash of cooling coil, condenser coil oil and grease to all moving parts including condensing motor/Blower motor and testing complete all as specified and as directed.
160
-
-
Supply and fixing in replacement of wall mounted heavy duty metal stand bracket set ( set of 2 number) L type of size 17.5/19.5 inch for installation of outdoor unit of split AC 1.5/2 Ton.
15
-
-
Supply and fixing in replacement of floor mounted AC stand made out of high quality metal material for installation of outdoor unit of split AC 1.5/2 Ton.
15
-
-
M&L for replacement of blower motor copper wound of window /Split type air conditioner 1.5 /2 ton capacity with same rating 220/230 volt complete all as directed (Make: AE/Electra/CG/JBB/Arihant/SS Trading)
15
-
-
M&L for replacement of blower motor blade of window type air conditioner 1.5 /2 ton capacity with existing size and type complete all as directed.
15
-
-
M&L for replacement of blower wheel with existing size and type for window type AC 1.5/2 Ton capacity.
4
-
-
M&L for replacement of blower of indoor unit of split AC 1.5 Ton/2Ton with existing size and pattern all as specified.
10
-
-
Supplying and fixing in replacement of Tharmostat switch suitable for water cooler upto 150 Ltr /Refrigerato rand Deep Freezer upto 550 Ltr / Widow type AC and Split type AC upto 2 Ton capacity . (Make: Indfoss/Renutrol/Godrej.)
15
-
-
M&L for replacement of room temerature senser suitable for window type/split type AC 1.5/2 Ton capacity
15
-
-
M&L for replacemnt of sunction / discharge valve of split AC 1.5/2 Ton all as specified
8
-
-
M&L for replacement of fan/Blower motor copper wount 220-240 volts of window / indoor unit of split air conditioner 1.5 /2 ton capacity/ water cooler//Fridge/Deep Frizeer with existing size and type complete all as directed . (Make: AE/Electra/CG/JBB/Arihant/SS Trading)
8
-
-
M&L for replacement of fan motor blade of outdoor unit of split type air conditioner 1.5 /2 ton capacity with existing size and type complete all as directed
10
-
-
M&L for replacement of swing blade/ flap set of indoore unit of split AC 1.5 Ton with existing type and pattern all as specified
7
-
-
M&L for replacement of capacitor 1 to 6 Mfd fan/blower motor of water cooler/AC/Fridge/Deep Frizeer all as spcified
10
-
-
M&L for replacement of capillary copper tube pencil type for split AC 1.5/2 Ton/ Refrigerator and deep freezer upto 550 Ltr/Water cooler upto 150 Ltr all as spcified
5
-
-
M&L for replacement of polynet/PVC filter mesh copmplete set of split /window type AC 1.5/2 Ton with existing size and pattern all as specified
10
-
-
M&L for replacement of electronic remot device of split/Window type AC 1.5/2 Ton with existing make and pattern all as specified
10
-
-
M&L for replacement of swing flap motor copper wound of split AC 1.5/2 Ton with existing size and pattern complete all as specified
6
-
-
M&L for replacement front grillof window type AC 1.5/ 2 Ton capacity with existing make and patternall as specified
2
-
-
M&L for replacement heavy duty Copper drier filter for Split and window AC upto 2 Ton/ Water cooler upto 150 Ltr / Refrigerator and Defreezer upto 550 Ltr
15
-
-
Supply, fixing installation & testing in replacement of new sealed unit compressor of window upto 2 Ton capacity with similar size and pattern in along with test Certificate from manufacturer and cleaning of condenser by machine doing vaccum on the fully system and supply and charging of oil and gas and other necessary lubricants including reconnecting the electric connections, transportaion & testing complete all as directed by Engr-in-charge. (Make Tecumseh/Emerson/LG/ Blue Star/Carrier/Kirloskar/Hitachi/ Mitsubishi/Dakin)
4
-
-
M&L for charging of refrigerant R-22 / R-410/R-407/R-134a or any other recommended refrigerant gas in 1.5/2 Ton window/split Air conditioner/ Refrigeratorof capacity upto 550 Ltr/ Deep Freezer of capacity upto 550 Ltr/ Water Cooler of capacity upto 150 Ltr including detecting leakage and rectify the leakage with proper brazing and testing on full load complete.
45
-
-
S&F in repair starting/running capacitor 15 to 50 MFD, 240 volt suitable for water cooler/window AC /split AC including connection complete (Make : Havells/USHA/Tibcon/Epcos/Arcos/Indtech)
25
-
-
S&F in repair starting relay suitable for air conditioner 1.5/2 Ton/ Deep Freezer and Refrigerator any cap complete (Make : HI-Tech/ Classic/ Techunsh/ Renutrol)
25
-
-
S&F in repair magnetic contactor, 30 Amp to FL 40 Amp, single pole, 208-240 V AC, 50/60 Hz for split/window air conditioner incl connection complete all as specified & directed.
13
-
-
M&L for powder coating paint on water cooler upto 150 Ltr/ refrigerator & Deep freezer upto 550 ltr capacity including minor denting and welding as required complete.
20
-
-
M&L in repair copper tubing 1/2" dia with existing gauge for suction/discharge line of split air conditioner of 1.5 Ton/2Ton capacity including high quality puf insulation complete.
60
-
-
All as per above item No 180 but size 3/8" dia
60
-
-
M&l for replacement of black rubber heat isulation sleeve 3.2 mm wall thickness for sunction and discharge copper tubing of split type Air Conditioner 1.5 /2 TR
100
-
-
S&F in replacement hermetically sealed rotary type compressor unit of capacity 1.5/2 Ton for split type AC and charging of adequate quantity of refrigerant gas and oil with testing complete (Make : Blue Star/Carrier/Kirloskar/Hitachi/ Mitsubishi/Dakin)
10
-
-
S&F in repair Power Circuit Board (PCB) suitable for split/ window type AC of capacity 1.5TR / 2.0 TR with all standard features i.e. power on-off, fan cooling speed, timer, temp etc complete of existing make and type all as directed. Make: Hitachi/LG/Carrier/GE/Blue Star/Voltas)
14
-
-
S&F in repair copper condenser /cooling coil unit of split type AC 1.5/2 ton of any make complete all as directed (Charging of refrigerant will be measured and paid separately). Make : Hitachi/ LG/ Carrier/ GE/ Voltas/ Blue Star)
7
-
-
S&F 6mm thick plywood sheet (ISI marked), waterproof fixed in window of required size including cutting for passing air of desert cooler complete all as directed.
10
-
-
M&L in replacement of condensing cooling fan motor 54 watt, 220-240 volts for outdoor unit of Split AC 1.5/ 2 Ton, single phase with copper winding all as specified and directed.
4
-
-
Supply and fixing in replacement of PVC flexible drain Hose pipe 15 mm dia with clamp. (Make :- PRAYAG/SUPREME/PRINCE)
60
-
-
S&F in repair indoor unit suitable for 1.5 Ton split AC with PCB, LCD with temperature remote controller, noise level not less than 50 db etc with all accessories complete in all respect all as directed (Make : Hitachi/LG/Carrier/GE)
3
-
-
S&F in repair outdoor unit suitable for 1.5 Ton split AC including rotary type compressor, high EER, copper material condenser unit, eco friendly refrigerent etc with all accessories complete in all respect all as directed (Make : Hitachi/LG/Voltas/Blue Star/GE/Carrier)
3
-
-
Supply and fixing in replacement of PVC flexible drain Hose pipe 40 mm dia with clamp. (Make- PRAYAG/ SUPREME/ PRINCE)
45
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements