Military Engineer Services Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Costs
EMD
₹ 4,89,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_690219_1Tender No
CEDZ/TOKEN-48 OF 2024Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each and refixing in the same opening after easing and adjusting, complete all as specified and directed
68
-
-
... More
Taking down door shutters of any description n. exc 1 Sqm each, complete all as specified and directed
32
-
-
... More
Dismantling of brick tiles, terracing tiles, single layer from roof laid, bedded and pointed in any mortar , complete all as specified and directed.
2005
-
-
... More
Removal of Mud from top roof slab, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof), complete all as specified and directed.
200.5
-
-
... More
Demolition of reinforced cement concrete as in roofs, floors (other than ground floors), beams, staircases ,landing chajjas and similar suspended work (Reinforcement cut as required to facilatate demolition) of any description and in any position not otherwise specially provided , complete all as specified and directed.
30.94
-
-
... More
Demolition of cement concrete (unreinforced) of any description and in any position not specifically provided for, complete all as specified and as directed.
106.39
-
-
... More
S&F FRP (Fiberglass reinforced plastics) chajja 4mm thick of fibreways or equivalent in required colour size and design made by resin transfer moulding (RTM) machine technology having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 Nos vertically and 1 Nos horizontally 50x2 mm thick M S flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically including all necessary fittings. The FRP Chajja should be manufactured using unsaturated polyster resin as per IS:6746 duly reinforced with fiberglass chopped strand mat (CSM) as per IS:11551 complete with protective gelcat ultravoulet coating on top for complete resistance fromm the extreme of temperature, weather & sunlight. Note - All the gaps are sealed using silicon sealant from tip and bbottom to make it water proof incl grouting in existing wall and fitting with suitable screws and fixtures upto 3rd floor level incl all labour material tools and plants, scaffolding safety arrangements quality checks complete in all respect all as specified and directed.
748
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises , complete all as specified and directed.
1302
-
-
... More
M&L for 25mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate as flooring and to receive floor tile , complete all as specified and directed.
3371.6
-
-
... More
M&L for 75mm thick plain cement concrete type C-2, 1:3:6 as in floor subbase to received floor tile , complete all as specified and directed.
384
-
-
... More
M&L for ceramic colour tiles 8-9 mm thick (square/rectangular) size 600 X 600 of each tiles , in floors etc set and jointed in neat cement slurry & pointed in white or colouir cement to match the surfaces over 15mm thick screed bed in cement mortar 1:4 , complete all as specified and directed.
2604
-
-
... More
All as per Srl item No.14 above but in vertical surfaces as in skirting/dados with backing coat 10 mm thick cement mortar 1:3
260.4
-
-
... More
M&L for non skid ceramic colour tiles 7-8mm thick (square/rectangular) size 400 X 400 of each tiles , in floors etc set and jointed in neat cement slurry & pointed in white or colouir cement to match the surfaces over 15mm thick screed bed in cement mortar 1:4 , complete all as specified and directed.
165.2
-
-
... More
M&L glazed ceramic coloured tiles in vertical surface 600X300X7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10 mm thick in cement mortar 1:3 and finished rough, complete all as specified & directed.
2028
-
-
... More
M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litre per sqm of the vertical surfae of the sub-structure to a depth of 300mm incluindg excavation channel along the wall and rodding etc, complete all as specified & directed.
52
-
-
... More
M&L for Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified & directed.
664
-
-
... More
M&L for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement:2 coarse sand) to match the existing floors, complete all as specified & directed.
1302
-
-
... More
M&L for filling of voids in masonry using chemical emulsion on litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors, complete all as specified & directed.
400
-
-
... More
M&L at points of contact of wood work by chemical eulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified & directed.
216
-
-
... More
M&L for 75mm thick type-D-2 1:4:8 (using 40mm graded crushed stone aggregate) as in sub base to receive stone slab and pavement, complete all as specified & directed.
190
-
-
... More
M&L 20 to 25 mm thick pre-polished machine cut Kota stone slab as in stair case over and including 15mm thick screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed. (Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above).
350
-
-
... More
M&L 20 to 25 mm thick pre-polished machine cut Kota stone slab as in riser or vertical surface over and including 10 mm thick rendering in cement mortar 1:3, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. (Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above).
90
-
-
... More
M&L Granite 20mm thick colour as approved ( of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15mm thick screed bed in cement mortar 1:4, complete all as specified & directed.
66
-
-
... More
M&L Granite 20mm thick colour as approved ( of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 10 mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite, complete all as specified & directed.
16.5
-
-
... More
M&L Reinforced cement concrete 1:2:4 type B-1 using 20 mm graded crushed stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete (reinforcement to be measured separately).
6
-
-
... More
Mild steel TMT bars 10 mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete.
475
-
-
... More
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and siilar work exc 5cm but not exc 10cm wide, complete all as specified & directed.
132
-
-
... More
Formwork to soffits of slabs n. exc. 200 mm thick and similar works rough finished surfaces of concrete, complete all as specified & directed.
79.2
-
-
... More
M&L Brickwork with subclass 'B' Brick straight or curved on plan exc 6m mean radius, built in, built in cement mortar 1:6 complete including demolition of the the brick work at any position, complete all as specified & directed.
176
-
-
... More
All as per Srl item No. 32 above but except brick complete.
10
-
-
... More
Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
9017.2
-
-
... More
M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:6 ) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with WPC finished even and fair etc complete all as specified and directed.(Note:- WPC shall be measured and paid separately.)
4350
-
-
... More
M&L 10 mm thick Rendering in cement mortar 1:6 on faces of brick work or concrete internal surfaces of wall finished even and fair without using extra cement, complete all as specified & directed.
4048
-
-
... More
M&L for followings :-
(i) Removing plaster & finishes all around the columns, slabs & beams
(on all four side of column to full height , three side of beam to entire span & bottom of slab to area as directed)
(ii) After cleaning gently removing cover concrete using pneumatic/electric chipper or any other approved tool in entire portion of structural member (removal of cover concrete shall be done to an extent when reinforcement is visible)
(iii) Removal of cover concrete with under cutting of up to a depth of 20mm beyond reinforcement around full circumference & full length of bar where directed. (concrete shall be stripped to an extent concrete substrate is exposed)
(iv) Cleaning exposed concrete substrate by using water jet.
(v) Removing visible rust along the length of reinforcement using hand tools as approved. Supply & applying of rust removing chemical to remove rust from existing reinforcements.
(The Engr-in-charge may order sand blasting if rust is visible)
(vi) Any other work as directed by Engr-in-charge to present clean surface for determination of type of repair to be carried out complete all as specified and directed.
220
-
-
... More
M&L for providing PMM (Polymer modified cementitious mortar) :-
(i) Dry sub strata surface and free of debris & dust
(ii) Applying Epoxy bond coat on the sound substrate using approved spray machine & ensuring that no pin holes are visible.(In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).
(iii) Immediately after application of epoxy bond coat as above apply PMM (Polymer modified cementitious mortar) of 25 mm thickness.
Note : Application of PMM shall be preferably be in coats of appx 10mm thickness. PMM work shall be executed in fairly rapid successions so as entire work is completed with in 30 mins). PMM shall be pre packed ready to use.
(iv) PMM surface to be moist cured for three days followed by air curing in temperature as recommended by manufacturer complete all as specified and directed.
220
-
-
... More
M&L for Providing & Pouring Micro concreting M-40 grade :-
(I) Dry concrete substrate surface and free of debris & dust
(ii) Applying Epoxy bond coat on the sound concrete substrate using approved spray machine & ensuring that no pin holes are visible. (In case pin holes are still visible after a coat, a second coat shall be applied to ensure absence of pin holes).
(iii) Immediately after application of epoxy bond coat as above pour Micro concreting M40 grade, Make : MasterEmaco S46T of BASF or equivalent FOSROC/SIKA using approved mixing machines/pumping under pressure via approved pneumatic pump at the locations to be repaired in RCC beams & columns etc,. Adding of aggregates will be permitted only as per manufacturer’s recommendation without compromising the strength. The rate shall include cost of all materials (except re-bar) labour charges for mixing, pouring concrete, cost of tools, lead & lift of materials, transportation etc., to carry out the complete work complete all as specified and directed including M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed.
Note : Form work shall be 100% leak proof. The cost of micro concrete M-40 grade & Epoxy bond coat is included in this item.
10
-
-
... More
M&L for chipping out spilled and loose concrete cover and derusting steel reinforcement of concrete column, beam, slab, chajjas, parapets and the like as directed up to 25 to 35mm thick roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry including derusting steel wire reinforcement, providing fabric MS wire mesh 75 x 75 x 2mm as reinforcement to concrete surface applying adhesive/admixture over steel mesh and providing 25mm average thickness guniting mix using one part of OPC 53 grade and two part of sand mixed with adhesive/admixture @ pressure of 2.5 to 3.00kg/Sqcm by guniting machine and surface finished even and fair including necessary padding, shuttering/scaffolding, formwork (guniting work to be carried out up to 10 metre height) complete as directed at site Note :- (a) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with wire brushes, washed with water and allow to dry, apply chemistic polycretes admixture @ 2.25 kg by weight of cement all as per manufacturers instruction. (b) when polymix concreting in taking condition,guniting is done with polycretes admixture @ 2% by weight of cement all as per manufacturers instructions (polycretes admixture shall be procured from chemical adhesive Pvt Ltd Co or their authorised dealer). (c) Cost of the above aspect shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.
800
-
-
... More
M&L for use & waste of form work using steel sheets , steel bracing, propping etc around structural members where micro concreting to be done and keeping form work in position till required specified period complete all as specified and directed.
Note:- Form work shall be 100% leak proof. For purpose of payment area in touch with concrete shall be measured.
220
-
-
... More
M&L for Drilling & chemical anchoring of new rebars/stirrups:- (i) Drilling in to the sound RCC members for anchoring of rebars/stirrups as directed, the dia of hole to be match with dia of rebar & length of drilling as under :-
10-12 mm dia bar - drilling length 80 to 100 mm Note : Anchoring of new re-bars of any dia as directed in to the sound RCC members as directed using pure epoxy resin anchoring mortar with appropriate diameter of drilling of holes as mentioned above for proper bonding into the concrete etc., complete all as specified and directed. Note:- The cost of drilling hole & chemical anchoring with epoxy resin is inclueded in this item
100
-
-
... More
S&F for stengthening existing reinforcement by use of mild steel bars of any dia , cut to length, bent to shape required, including cranking, bending spirally and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
1350
-
-
... More
S&F single stanchions, Fe-410-W (Gde-E-250) built up of one beam or channel section with flange plates, caps bases. Splices, angle brackets cleats and other connections rest over wall to give support slabs, complete all as specified & directed.
450
-
-
... More
M&L for 5mm thick rendering in cement mortar 1:3 on concrete surfaces of chajjas, upward fascias, ceiling and similar items, surface finished even and smooth without using extra cement, complete all as specified & directed.
1119.2
-
-
... More
M&L for preparation of old painted surface of ceiling and apply two coat of oil bound distemper on ceiling, complete all as specified and directed.
250
-
-
... More
M&L for preparation of new surfaces (Plastered or un-plastered) of ceiling and applying two coats of oil bound distemper over a coat of primer, complete all as specified and directed.
2769.2
-
-
... More
M&L for preparation of the newly plastered surfaces of walls and applying one coat primer & two coats Oil Bound Distempering with, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as specified and directed.
4048
-
-
... More
M&L for preparation of old decorated surface (plastered or unplastered) of walls by complete removal of existing treatment by mechanical grinder and applying one coat primer & two coats Distempering, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification, complete all as specified and directed.
4048
-
-
... More
M&L for preparation of old decorated plastered surfaces of walls, complete removal of existing treatment by rubbing , brooming down, washing with water etc and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), , complete all as specified and directed.
350
-
-
... More
M&L for preparation of newly plastered surfaces of walls and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed.
4350
-
-
... More
Dismantling wrought iron or mild steel work of any description not other wise provided, complete all as specified and directed.
4
-
-
... More
S&F Hand rails, half round or other steel section frame of angle iron or core for wooden hand raoil straight portion, drilled and countersunk for alusters running bars, for doors, balusters nosing to steps including embedding in concrete and screwing etc, including all necessary drilling bolting or riveting, etc and similar work conforming to Fe 290 Gde E165, complete all as specified and directed.
8778
-
-
... More
S&F Framed work as in doors or gates of angle iron or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing in Fe 410-W (Gde-E-250) quality A , complete all as specified and directed.
231
-
-
... More
S&F Mild steel, plain , black sheet of 1.25 mm thick in wall cladding steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required, complete all as specified and directed.
28
-
-
... More
Taking up or down steel water tubing and connections 15mm bore pipe complete all as specified and directed.
352
-
-
... More
Taking up or down steel water tubing and connections 20mm bore pipe complete all as specified and directed.
308
-
-
... More
Supply, laying and fixing of 20mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc suitable for 15mm bore bath fittings). (Note- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings).
792
-
-
... More
Supply and laying of 25mm outer dia of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings on wall/ceiling or laying in floors complete including brass CPVC fittings (i.e elbow, Tee, MTA/MBTA,FTA/FBTA, Tank adaptor, Union, etc). (Note- length of pipe with fittings to be measured for payment, no extra payment should be made for fittings).
1760
-
-
... More
Dismantling PVC water tanks of capacity exc 250 Ltrs but n.exc 500 Ltrs from roof , complete all as specified and directed.
44
-
-
... More
S&F rotationally moulded polyethylene water storage tank (cylindrical vertical with closed top), triple layered, hoisted & fixed in position of capacity 500 ltrs including making necessary arrangements for fixing of inlet, outlet, over flow pipe, wash out pipe etc, complete all as specified & directed.
44
-
-
... More
S & F 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified & directed.
44
-
-
... More
S & F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified & directed.
44
-
-
... More
S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic wall, screwed for iron pipe and fixed for 25 mm bore size (Minimum weight 210gms), complete all as specified & directed.
44
-
-
... More
M&L for cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth, complete all as specified & directed.
792
-
-
... More
S&F in repair 150x100 mm Salt glazed stoneware gully traps, square or rounded mouthed type 'P' , with CI grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in bed, complete all as specified & directed.
44
-
-
... More
Dismantling of floor of size exc 1.5 Sqm and not exceeding 5.00 Sqm mtr for water closet and bathroom and removing out the cinder/concrete from sunken portion, , grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.
(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.
(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.
(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.
(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.
(f) The area of Each WC portion is n.exc 4.00 Sqm each.
(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.
(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.
22
-
-
... More
Dismantling of floor of size not exceeding 1.50 Sqm mtr for water closet/bath and removing out the cinder/concrete from sunken portion, , grinding any sharp edges etc all as specified and directed with following: (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.
(b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of Sika Top & Seal-107 @ 1.50 Kg/Sqm glass fibre reinforcement Sika® Fab-I and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc or Pidilite.
(c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with Sika ® Plastocrete plus as specified.
(d) M&L for providing 40 mm dia GI pipe spout projecting at least 150 mm beyond outer face of wall.
(e) M&L for sunken portion filled with 40 mm graded brick bats and finished with 50 mm thick PCC 1:2:4 type B1 all as specified and directed.
(f) The area of Each WC portion is n.exc 1.50 Sqm each.
(g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.
(h) 72 hrs Ponding test shall be carried out for sunken treatment before payment.
22
-
-
... More
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including demolition/taking down PVC/CI drain pipe, complete all as specified & directed.
252
-
-
... More
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore including demolition/taking down PVC/CI drain/Rain water pipe, complete all as specified & directed.
440
-
-
... More
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore including demolition/taking down PVC/CI drain/Rain water pipe, complete all as specified & directed.
220
-
-
... More
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110 mm bore including demolition/taking down PVC/CI drain/Rain water pipe, complete all as specified & directed.
352
-
-
... More
S&F PVC (SWR) bends any radius, 75 mm bore, complete all as specified & directed.
88
-
-
... More
S&F PVC (SWR) bends with access door any radius, 75 mm bore, complete all as specified & directed.
88
-
-
... More
S&F PVC (SWR) bends any radius, 110 mm bore, complete all as specified & directed.
352
-
-
... More
S&F PVC (SWR) junction single (single T), equal or unequal, with access door 75 mm bore, , complete all as specified & directed.
44
-
-
... More
S&F PVC (SWR) junction (double T), equal or unequal, with access door 110 mm bore, , complete all as specified & directed.
44
-
-
... More
S&F PVC (SWR) vent cowl, 110 mm bore, complete all as specified & directed.
44
-
-
... More
S&F Stainless steel plate rack (utensil rack) of size (600 mm x 750 mm) and depth 250 mm made with 0.63 mm thick stainless steel sheet provided with brass screw including necessary fittings, nut/bolts , complete all as specified & directed.
44
-
-
... More
S&F looking mirror of size 600mmx450mm with 5 mm thick mirror of selected quality glass, mounted on plastic frame and fixed, complete all as specified & directed.
88
-
-
... More
S & F Soap dish disc (oval) type, stainless steel chromium plated of approximate size 100 x 50 x 10 mm,, complete all as specified & directed.
88
-
-
... More
S & F sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass self 12 cm wide with chromium plated bracket guard and railing 60 cm long, complete all as specified & directed.
88
-
-
... More
S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate mix with WPC complete all as specified and as directed, complete all as specified & directed.
176
-
-
... More
S & F stainless steel sink with drainage board, made out of 1.00 mm thick sheet with plug, washers, waste pipe, cast iron cantilever brackets, connecting union over all size 915 mm X 460 mm with bowl size 410 mm x 330mm x 160 mm complete, complete all as specified & directed.
44
-
-
... More
S & F Tubular towel rail of brass chromium plated, 20 mm dia, 'D' type, 60 cm long between flanges, complete all as specified & directed.
88
-
-
... More
S & F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15 mm bore, complete all as specified & directed.
44
-
-
... More
S & F in repair Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15 mm bore, complete all as specified & directed.
88
-
-
... More
S&F in repairs wash hand basin mixer 15mm dia CP brass fancy type including joints to steel pipe or unions, complete all as specified & directed.
44
-
-
... More
S&F in repair 15mm dia chromium plated quarter turn wall mixer hot & cold L bend 3 in 1 pattern fixing and connection to pipes, complete all as specified and directed. Make Jaquar Cat Part No.FLR5281N, CERA Cat Part No.F2008401, Hindware Cat Part No.F570022
44
-
-
... More
S&F in repairs Kitchen sink mixer 15mm dia CP brass fancy type including joints to steel pipe or unions, complete all as specified & directed.
44
-
-
... More
S & F in repair Brass chromium plated shower rose 12.5 mm size with swivel joints, wall flange, complete all as specified & directed.
44
-
-
... More
S&F 10 litre capacity PVC low level flushing cistern with dual flush type‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600 mm long , complete all as specified & directed.
44
-
-
... More
S & F in repair PVC connection 600mm long and15 mm dia with brass fly nut at both ends, complete all as specified & directed.
220
-
-
... More
S&F in repair Vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flushing cistern and flush pipe connection to trap and to flushing pipe inbend cluding provn of cement concrete beading, complete all as specified and directed.
44
-
-
... More
Supply only EWC Seat cover white colour as approved of PVC closed pattern with flat bottom and mild steel lchromium plated or aluminised hinging device, complete all as specified and directed.
44
-
-
... More
Supply and fixing vitreous China wash hand basin (pedestal) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste pipe & waste coupling including all necessary fitting and fixtures, complete all as specified & directed.
44
-
-
... More
S & F 32 mm dia bore Low density polyethylene pipes (LDPE)of pressure rating 6kgf/cm2 fixed complete to walls,ceilings or in floors etc for WHB and sink, complete all as specified & directed.
88
-
-
... More
S&F in repair Chromium plated brass stop or angle valve for 15mm bore pipe, fixed in repairs complete all as specified and directed.
220
-
-
... More
M&L for Plain cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate as in fixing of hold fast of door frame in wall including form work, complete all as specified & directed.
6.83
-
-
... More
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/
Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full
body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and
length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). → Note: For WPC solid door/window frames,
minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
418
-
-
... More
S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.
132
-
-
... More
S&F 35 mm thick second class hardwood glazed and Skelton factory made door shutters, open rebated and prepared to receive glass/gauze etc divided into squares with plain, chamfered or rounded mitered and rebeated sash bars, any numbers, wooden beads for securing glass/ gauge complete all as specified in SSR Pt I-1991 section 8 clause 8.24 (a) and as directed.
226
-
-
... More
Supply and fixed 2nd class hard wood Plain, framed, panelled shutters 35 mm thick (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers and framing is moulded on solid (for each side)
492
-
-
... More
S&F Aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wiremesh shutter (2 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.
336
-
-
... More
S&F Aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mmx114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mmx65mm. (iii) Welded shutter (02 Nos) of size 40mmx60mmx1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm SS 202 grade round bar. (v) Welded wiremesh shutter (2 Nos) of size 40mmx18mmx1.3mm thickness 45 degree cut with 0.45mm nominal dia of SS wire mesh, SS 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Windwo shall have provision for installation of window AC/Desert Cooler and provision of windwo glass shutter, wiremesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge. (viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.
64
-
-
... More
M&L for providing and fixing Mild Steel railing on stair case made of hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified & directed.
2429
-
-
... More
S&F Rolled mild steel sections conforming to Gde Fe-290-0 or Fe-165 as in coolar stand fixed into wall making hole and fixed with PCC, clamps etc similar work, complete all as specified & directed.
1078
-
-
... More
S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm, fixed with stainless steel wire staples beads, tinned tacks to wooden doors shutters , complete all as specified & directed.
180
-
-
... More
Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including all assessary, complete all as specified & directed.
176
-
-
... More
S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Plain Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural Fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with density not less than 650 kg/cbm Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof, Fire Retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen & Cabinets.
718
-
-
... More
S&F Factory Made 18mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Board of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 , Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free. Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Toilet/Kitchen and Cabinets.
400
-
-
... More
S&F magnetic catches with steel body ‘H’ type, fixed to shutter, complete all as specified & directed.
968
-
-
... More
S&F Brass handles,100mm long cast type, polished bright, complete all as specified & directed.
968
-
-
... More
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30mm width of flap when it is open, complete all as specified & directed.
830
-
-
... More
S&F floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm, complete all as specified & directed.
244
-
-
... More
S&F 4 levers brass cupboard locks grade-I, size 65 mm, complete all as specified & directed.
88
-
-
... More
S&F stainless steel AISI 304 grade barrel tower bolt 150mm long, extruded section, etc. complete all as specified and directed.
264
-
-
... More
S&F stainless steel AISI 304 grade barrel tower bolt 200mm long, extruded section, etc. complete all as specified and directed.
712
-
-
... More
S&F MS butt hinges, 100 mm size medium weight,, complete all as specified & directed.
1068
-
-
... More
S&F 100mm long (size) butt hinges, stainless steel AISI 304 grade, complete all as specified & directed.
264
-
-
... More
S&F in repairs 150mm size stainless steel AISI 304 grade cast type handle, complete all as specified and directed.
888
-
-
... More
S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed.
88
-
-
... More
S&F 300mm long, stainless steel AISI 304 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of stainless steel AISI 304 grade and fixed, complete all as specified & directed.
244
-
-
... More
S&F Stainless steel drapery curtain rods confirming to ASTM Schedule 5S gold or antique silver 25 mm nominal dia of SS-304 grade of approved quality with two number decorative brackets design as approved fixed in brick/concrete wall with same finished knobs/latto on each end of curtain rod including taking down old pelmet, complete all as specified and directed.
713
-
-
... More
M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces , complete all as specified & directed.
1626
-
-
... More
M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces , complete all as specified & directed.
660
-
-
... More
M&L cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement incl making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight including necessary form work and complete all as specified.
559
-
-
... More
M&L cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.
124
-
-
... More
M&L for cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) as in levelling coarse over RCC slab to bring the desired slope up to six storied Bldg, using water proofing compound as per manufacturer instruction complete all as specified & directed.
Note:- Water proofing compound shall be measured and paid separately.
79.4
-
-
... More
Supply only integral water proofing compound, complete all as specified & directed.
861
-
-
... More
M&L for APP based polymeric membrane with mineral granules finish minimum weighting 3 kg/Sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over one coat of 85/25 bitumen @1.2 kg/sqm and paste the membrane with torching method and again apply a coat of 85/25 bitumen @ 1.2 kg/sqm at overlapping joints, complete all as specified & directed.
1985
-
-
... More
S & F for Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) 78, solar reflection 0.70 and initial emittance 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface up to 3 cuts complete, including providing skirting up to 150 mm height along the parapet walls in the same manner, complete all as specified & directed.
1985
-
-
... More
Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan in soft/loose soil and getting out, complete all as specified & directed.
84
-
-
... More
Demolition of Reinforced concrete drain pipe set in cement mortar, internal dia of pipe 150mm including taking out from trenches, complete all as specifed & directed.
175
-
-
... More
M&L for PCC 1:4:8, nominal mix, type D-2 using 40mm graded crushed stone aggregate as in foundations, filling & mass concrete, complete all as specified & directed.
17.06
-
-
... More
M&L for 150mm bore DWCPE pipe as per IS-16098, ISI marked, laid in trenches and jointed, tested including laying complete with collars as per manufacturer instructions, complete all as specified and directed.
175
-
-
... More
Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed.
10
-
-
... More
M&L for brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:4, complete all as specified & directed.
10
-
-
... More
M&l for 15mm thick rendering in cement mortar 1:4 on fair faces of brick surfaces or concrete surfaces using integral water proofing compound, surface finished even and smooth without using extra cement, complete all as specified & directed.
Note : Integral water proofing compound shall be measured & paid for seperately under respective item.
55
-
-
... More
M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching, internal dia of pipe 150mm, complete all as specified & directed.
22
-
-
... More
S&F SFRC manhole covers with and including frame medium duty over all size 600 mm x 600 mm x 80mm thick factory made and test load 10 tonnes (MD-10), strength as per IS-12592 (2002), ISI marked, complete all as specified and directed.
40
-
-
... More
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm, complete all as specifed & directed.
30
-
-
... More
M&L for PCC 1:2:4, nominal mix, type B-1, using 20mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified & directed.
1
-
-
... More
Removing excavated material to a distance not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point, complete all as specified & directed.
54
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%