Military Engineer Services Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date21 Oct 2024
Closing Soon18 Nov 2024
Tender Amount₹ 49,00,000
Costs
EMD
₹ 98,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_680541_1Tender No
GE/TKD-63/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Taking down or up 15 mm bore galvanised iron tubing and connection including cleaning for refixing or removal complete all as specified and directed by Engr-in-charge.
85
-
-
All as per item No 3 here in before but 20 mm bore complete all as specified and directed by Engr-in-charge.
70
-
-
Taking down cement plaster including raking out joints hacking for key and scrubbing down with water complete all as specified and directed by Engr-in-charge. Note: All demolished material removed from MOD land completely.
1200
-
-
Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc. complete all as specified and directed by Engr-in-charge.
50
-
-
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge. Note: All demolished material removed from MOD land completely
11.25
-
-
Demolition of cement concrete of any description & in any position not otherwise specially provided for etc. complete all as specified and directed by Engr-in-charge. Note: All demolished material removed from MOD land completely
10
-
-
Dismantling of cast iron drain pipe of 100mm bore jointed in lead joints or cement joints and taking out of under floors if required complete all as specified and directed by Engr-in-charge.
20
-
-
Demolition of brick work or stone/boulder masonry, built in cement mortar incl. all quoins arches, pillars etc. but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed by Engr-in-charge.
4
-
-
S&F 500 ltrs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) including dismantling and hoisted and fixed in position complete all as specified and directed by Engr-in-charge.
4
-
-
S&F GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed by Engr-in-charge.
85
-
-
All as per serial item 12 here in before but 20 mm bore complete all as specified and directed by Engr-in-charge.
70
-
-
Refixing only old GI tubing 15 mm bore pipe and connections in new or old position as on walls ceiling floors etc complete all as specified and directed by Engr-in-charge. (i) Cleaning of pipe is included in ser No 3 & 4 here in before. (ii) Rates quoted by the contractor deemed to be included for S&F new fittings as required.
20
-
-
All as per serial item 14 here in before but 20 mm bore complete all as specified and directed by Engr-in-charge.
20
-
-
S&F of 20 mm bore ball brass valves (Float valve) high pressure with polythene float and fly nut complete screwed to iron pipe or brass ferrule complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repair 20 mm bore Gun-metal, globe or gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed by Engr-in-charge.
4
-
-
S&F for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm pre-laminated PVC sheet, reinforced with MS square tube fixed in opening with smooth finish complete as per manufacturer's specifications and as directed by Engineer-in-Charge
20
-
-
S&F Factory Made Solid PVC Moulded Door Shutter with particle board, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing specified in SSR and as directed by Engineer-in-Charge
7
-
-
S&F, 100 mm long butt hinges, extruded alminium alloy with galavanised mild steel hinge pin, anodised and fixed , type C-21 complete all as specified and directed by Engr-in-charge.
12
-
-
S&F 150 mm size aluminium handles, cast type anodised and fixed complete all as specified and directed by Engr-in-charge.
8
-
-
S&F 150 mm long aluminum, anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed by Engr-in-charge.
8
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 100 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr-in-charge.
36
-
-
S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed by Engr-in-charge.
25
-
-
M&L for PCC 1:2:4 type B1 in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded or chamfered angles complete all as specified and directed by Engr-in-charge.
0.5
-
-
S&F 35 mm thick factory made, second class hard wood, plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces, the size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge.
21
-
-
S&F 35 mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, wire gauze, etc. divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed by Engr-in-charge.
11
-
-
S&F 200 mm mild steel barrel tower bolts stove enamelled black with bright bolt and fixed complete all as specified and directed by Engr-in-charge.
22
-
-
S&F 300 mm mild steel sliding bolt plate type stove enamelled black with bright bolt not less than 12 mm dia with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate and fixed complete all as specified and directed by Engr-in-charge.
22
-
-
S&F 100 mm size mild steel butt hinges medium weight cold rolled and fixed with screws or welding where required complete all as specified and directed by Engr-in-charge.
33
-
-
S&F mild steel pressed handle 150 mm long oval types stove enamelled black complete all as specified and directed by Engr-in-charge.
22
-
-
S&F floor door stopper of alluminium alloy body and tongue anodised with hard drawn steel spring over all length 140mm complete all as specified and directed by Engr-in-charge.
7
-
-
S&F Aluminium Anodized powder coated aluminium frame for doors, windows, ventilators, portion wall with one or more rebates including joining cleat for fixing, thickness of powder coating is 50 micron complete all as specified and directed by Engr-in-charge.
84.87
-
-
S&F anodised aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type suitable for glass pan without sash bar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No complete all as specified handles 1 Nos in each window, hinges, aluminium snap beading screws complete all as specified and directed by Engr-in-charge.
15
-
-
S&F anodised aluminium powder coating of any colour (Thickness of powder coating not less than 50 micron) window and ventilator shutter side hung type suitable for wire mesh without sashbar, aluminium sections weighing 0.55kg/m incl necessary joining cleat glazing clips, rubber neoprene packing, alumimium anodised snap beading, screws , peg stay 150mm long -1 No, hinges type B-21 100mm long -2 Nos, suitable handle -1 No, handles 2 Nos in each window, hinges, aluminium snap beading screws complete all as specified and directed by Engr-in-charge.
15
-
-
S&F 7mm thick aluminium grill of make 'Deco grill DG-104' model or equivalent fitted in to suitable aluminium channel and fixed to windows / ventilators including channel complete all as specified and directed by Engr-in-charge.
15
-
-
S&F 4.0 mm thick plain sheet glass panes and glazing with oil putty in square not exceeding 0.5 sqm in each pane and fix in aluminium door / window/ventilator complete all as specified and directed by Engr-in-charge.
12
-
-
S&F 4.0 mm thick Figured glass, pin head type and glazing with aluminium beadding screws or oil putty in square not exceeding 0.5 sqm in each pane and fix in aluminium door / window/ventilator complete all as specified and directed by Engr-in-charge.
3
-
-
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed with tinned tacks ro galvanised wire staple complete all as specified and directed by Engr-in-charge.
12
-
-
M&L for gunniting to RCC works in column, beams, slabs, chajja, facia, landing, balconies etc by removing/ dismantling of RCC (loose concrete) including plaster and cutting of steel bar including plaster cleaning of surfaces with wire brushes and applying epoxy, paint anti corrosive coating of minimum 40-50 microns thick with sikatop Armatec 108 or Colusal VL of MC Bauchemie to rusted steel reinforcement after removing cleaning all rust and supply and fixing welded steel wire mesh 75mm x75mm with 4mm dia steel wire as facies/drops and similar works etc and expoxy based or other equivalent suitable bonding against treatment to be carried out on old concrete surface with Sikadur 32 of Sikka. Nito bond EP of fosroc or equivalent (as per manufacturers instruction) to bond old and new concrete mixing @ 2% by weight of cement polycrete and providing gunniting with a minimum pressure of 2 to 2.5 Kg Sqcm and applying 25mm to 100 mm thick (avg thickness) gunniting in cement mortar (1:2) (one part of cement and two part of ghaghar sand) with plastering (1:4) using ordinary port land cement of 43 grade over wherever required at any height, complete all as specified and directed by Engr-in-charge. Note:- (i) After placing the additional reinforcement all concrete surface shall be thoroughly scrubbing with. (ii) Additional reinforced TMT bars where incorporated in work and including 20mm thick cement plaster in 1:4 to be included in quoted rate (iii) Work to be carried out as in patches as directed by Engr-in-charge. (iv) Rate for steel scaffolding as directed to be included in quoted rate. (v) All demolished material removed from MOD land completely.
500
-
-
M&L for 10 mm thick cement plaster with readymix plaster (as per manufaturer's instruction) on other than fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Enigneer-in-Charge. Note:- The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill.
300
-
-
M&L for 15 mm thick cement plaster with readymix plaster (as per manufaturer's instruction) on fair faces of brick wall or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Enigneer-in-Charge. Note:- The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill.
700
-
-
M&L for 5 mm thick cement plaster with readymix plaster (as per manufaturer's instruction) on fair faces of ceiling or concrete surfaces finished even and smooth, (without using extra cement) complete all as specified and directed by Enigneer-in-Charge. Note:- The readymix plaster shall be procured directly from the manufacturer or their authorised dealer. The contractor shall produced original purchase voucher alongwith test certificate of readymix plaster by manufacturer or their authorised dealer while claiming RAR/ Final Bill.
200
-
-
M&L for 75 mm thick PCC 1:3:6 type C2 as in plinth protection finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
150
-
-
S&F 100 mm dia cast iron soil waste and vent pipes sand cast in any length with or without ears laid in trenches or in floor with cement joints complete all as specified and directed by Engr-in-charge.
25
-
-
All as per item No 45 here in before but fixed to walls complete all as specified and directed by Engr-in-charge.
10
-
-
S&F of 75 mm bore cast iron drain drain/waste/vent pipes fixed to wall, floor jointed with lead joints incl dismantling of old cast iron drain, waste, vent pipe of any description , jointed with any material complete all as specified and directed by Engr-in-charge.
20
-
-
S&F cast iron floor trap with grating of 75 mm size including jointing to waste pipe with cement joints etc complete all as specified and directed by Engr-in-charge.
6
-
-
S&F cast iron floor trap with grating of 100 mm size including jointing to waste pipe with cement joints complete all as specified and directed by Engr-in-charge.
10
-
-
S&F 100 mm bore cast iron bends of any radius diminishing pieces or tappers (larger bore measured) fitted with access door complete all as specified and directed by Engr-in-charge.
10
-
-
S&F in repair of Cast iron branch pieces , tee equal or unequal spigot or socket type or with parallel branches to 75 mm dia pipe fitted with access door complete all as specified and directed by Engr-in-charge.
2
-
-
S&F in repair vitreous china wash basin with pedestal, white, flat back, size 550 mm x 400 mm fixed on and including cast iron cantilever bracket, 32 mm dia brass waste coupling and tap, waste pipe complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repairs of 15 mm dia bore cast copper alloy chromium plated fancy type mixer pillar tape for cold & hot water complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repairs of 32 mm bore of pipe low density (LDPE) of pressure rating 6 kg/ sqcm fixed to wall or floor etc including fittings complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repairs of 32mm dia waste fitting brass chromium plated for basin with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed by Engr-in-charge.
15
-
-
S&F in repairs of bib tap of CP fancy type with butterfly handle screwed down screwed for iron pipe of 15mm bore complete all as specified and directed by Engr-in-charge.
10
-
-
S&F in repairs of angle valves CP screwed down high pressure of fancy type chromium plated screwed both ends for iron pipe or for union and fixed with 15mm bore complete all as specified and directed by Engr-in-charge.
16
-
-
S&F in repairs 2 way angle cock double handle with flange 15 mm bore (for iron pipe) cast copper alloy fancy type chromium plated screwed down, complete all as specified and directed by Engr-in-charge.
6
-
-
S&F in repair of brass chromium plated shower rose 125 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repair of CP soap tray fixed to walls with rubber plugs complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repair of Wall mixture 15mm bore dia cast copper alloy with cap capston chromim plated screwed down high pressure with or without lettered "Hot" or "Cold" with long screwed shanks and fly buts screwed for iron pipe complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repair kitchen sink with drainage board made out of 1mm thick stainless steel with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe over all size 915 mm X 460 mm & bowl size 410 mm X 330 mm X 160 mm complete all as specified and directed by Engr-in-charge.
1
-
-
S&F in repair brass chromium plated tubular towel rail 20 mm dia D type, 60 cm long between flanges complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repair of PVC bath room cabinet with mirror of size 432 mm x 311 mm complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repair of (600mm x 450mm) bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood with aluminium frame 15 x 15 and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repairs stainless steel curtain rod of dia 25 mm complete all as specified and directed by Engr-in-charge.
100
-
-
S&F Stainless steel bracket with finels for holding curtain rodes of dia 25 mm complete all as specified and directed by Engr-in-charge.
30
-
-
S&F for stain less steel kitchen plate rack Size 24 inchx 30 inch size complete all as specified and directed by Engr-in-charge.
1
-
-
S&F in repair vitreous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts flushing cistern and flush pipe) with seat cover with CP screw complete all as specified and directed by Engr-in-charge.
3
-
-
S&F in repairs vitreous China squatting pan of Orissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe including concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed by Engr-in-charge.
1
-
-
S&F in repair PVC low level cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repair CP jet spray with flexible tube 1.5 mtr long complete all as specified and directed by Engr-in-charge.
3
-
-
S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-charge.
3
-
-
S&F in repair of corner glass shelf 12" complete all as specified and directed by Engr-in-charge.
12
-
-
S&F in repair of front glass shelf 450 mm long complete all as specified and directed by Engr-in-charge.
6
-
-
S&F 110 mm bore of pipe PVC (SWR) pipes double socket in any length with rubber ring joint fixed to walls with MS clamps complete all as specified and directed by Engr-in-charge.
20
-
-
S&F 110 mm bore of pipe PVC (SWR) bends with access door of any radius / shoe fixed to PVC pipes complete all as specified and directed by Engr-in-charge.
6
-
-
M&L for glazed ceramic coloured tiles 7mm thick 450 x 300mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade. Etc including 10 mm thick rendering in CM 1:4 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.
100
-
-
M&L for double charge Vitrified color Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors over 15 mm thick screed bed in CM (1:6) etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engr-in-charge. Note: All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.
150
-
-
S&F vitrified tiles 10mm thick (Square/rectangular) polished in light shade, area exc 0.42 Sqm but n exc 1.00 Sqm in floors (600mm x 1200mm) etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6 including dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed by Engr-in-charge. Note: All dismantling/demolished material removed from MOD land completely. Rate of removal outside side from MoD land deemed to be included in the same item.
125
-
-
S&F in repairs of non skid ceramic coloured tiles of 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm with 15 mm thick Screed bed or bedding layer in CM (1:6) set and jointed in neat cement slurry and pointed with white or coloured cement to match complete all as specified and directed by Engr-in-charge.
20
-
-
M&L for brick work in CM (1:6) with sub class ‘B’ bricks straight or curved on plane exc 6m mean readius, used in drain, boundary wall, compound wall complete all as specified and directed by Engr-in-charge.
4
-
-
M&L for TMT steel bars 6mm to 8mm dia and over cut to length bent shape required, including cranking bending binding with mild steel wire (annealed) not less than 0.9mm dia quality conforming to relevant IS complete all as specified and directed by Engr-in-charge.
20
-
-
Re-baring by drilling holes and fixing nozzle if required in existing concrete/brick work as in column, beams, slabs and foundation etc in any position and any description size of hole 14mm, 16mm & 22mm suitable for dowels of size 10mm, 12mm & 16mm respectively (minimum depth 140mm for 10mm & 12 mm dia bars and 180mm for 16mm dia bar, cleaning the surface properly with blow out pump & round brushes and fixing of dowel bars with epoxy resin (resin+hardner). Make: Sika, Fosroc or concressive 1450 of BASF com complete all as specified and directed by Engr-in-charge. Note:- (i) Adequate lap length shall be provided as per IS-456-2000. (ii) Reinforced TMT bars where incorporated in work will be paid under item no 4&5. (iii) The work shall be carried out upto four storied building with scaffolding.
20
-
-
M&L for providing and applying corrosion resistance non-shrink free flow, cementations one component Micro-concrete with average thickness 75mm having compressive strength (BS 4551-80-60) 50 MPA at 28 days, Tensile strength (ASTM C 348)-2.0 N/mm2 @ 28 days, Flexural strength (ASTM C 348)-9 epoxy bonding agent TM bond EP thermax having mix density of 1.45 to 1.5 kg/ltr, compressive strength (BS-6319 PT 3)-25 Mpa at 7 days bond strength (ASTM C 881)- 11 N/mm2 at 7 days, having an over lay time of 3 hrs at 30°C pouring of micro concrete into the formwork using suitable arrangement or if required using pumping device for and the bottom shuttering after 7 days ensuring proper bond between the micro concrete and existing concrete substrate etc including all tools and tackles as per accepting office, complete all as specified and directed by Engr-in-charge. Note: Shuttering & Scaffolding rate deemed to include in same item. Height of building upto 4mtr. No extra claim by contractor for same.
50
-
-
M&L for 20mm thick granite (of any type)work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick screed bed in CM 1:6 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed by Engr-in-charge.
20
-
-
Rounding to the edge of stone slabs on edge such as cooking platform complete all as specified and directed by Engr-in-charge.
20
-
-
Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed by Engr-in-charge.
65
-
-
S&F factory made solid PVC door frame/chowkhat size 50mmx47mm fixed in opening for cupboard with smooth finish complete as per manufacturer's specifications and as directed by Engineer-in-Charge
20
-
-
Supply and fixing 6mm thick pvc ply with suitable fully threaded steel screws etc on the backing of rack, drawer, cupboard, kitchen cabinet under kitchen counter complete all as specified and directed by Engr-in-charge.
40
-
-
Supply and fixing 12 mm thick PVC ply with suitable fully threaded steel screws and "L" button etc in partitions, boxes, shelves, racks and cupboard, kitchen cabinet, racks almirah partition under kitchen counter etc all complete all as specified and directed by Engr-in-charge.
15
-
-
Supply and fixing 19mm thick both side balancing lamination factory pressed BWP marine grade ply as per IS 710 of brand Greenply / Century Ply / Duro in partitions, boxes, shelves, racks, almirah, cupboard and drawer etc including necessary nails, screws etc, including fixing 2 mm thick PVC edge banding tape with hot glue by edge banding machine etc with complete all as specified and directed by Engr-in-charge.
15
-
-
Supply and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of brand Green Ply/Century Ply or Duro including fixing 2 mm thick PVC edge banding tape with hot glue by edge banding machine etc with necessary soft closing spring loaded hinges (hydraulic type) complete all as specified and directed by Engr-in-charge.
15
-
-
S&F Brass 4 lever locks, cupboard, grade I, size 50 mm complete all as specified and directed by Engr-in-charge.
10
-
-
S&F Magnetic catcher for Wardrobe, Cub-boards etc. complete all as specified and directed by Engr-in-charge.
30
-
-
S&F stainless steel fancy Grade 304 handle of approved make fixed with SS screws complete all as specified and directed by Engr-in-charge.
30
-
-
S&F in repair heavy type telescopic drawer channels HETTICH or equivalent 500 mm long with necessary screws etc. complete all as specified and directed by Engr-in-charge.
30
-
-
S&F in repair readymade 304 grade stainless steel Modular kitchen basket and accessories such a right angle basket (Plain Cup & Saucer, plate, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, Kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nut & bolts, Stainless Steel screws & telescopic channel etc. complete all as specified and directed by Engr-in-charge. Note: Weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc included.
35
-
-
S&F of "L" button for holding of Shelf in Cabinet with all necessary screw, drilling etc complete all as specified and directed by Engr-in-charge.
50
-
-
Dismantling of wrought iron or Mild Steel work of any description complete all as specified and directed by Engr-in-charge.
3
-
-
S&F of Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed by Engr-in-charge.
300
-
-
S&F ISI marked hydraulically regulated door closer die aluminum body type complete suitable for door shutter width of 851 to 1000 mm and weight between 61 to 80 kg complete all as specified and directed by Engr-in-charge.
4
-
-
S&F in repair Aluminiumn door seal width of 1.50 inch with nylon brush fitted with screw complete all as specified and directed by Engr-in-charge.
10
-
-
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and complete all as specified and directed by Engr-in-charge.
30
-
-
M&L for brushing neat cement slurry with 3.0Kg of cement per sqm and complete all as specified and directed by Engr-in-charge.
30
-
-
M&L for machine cut kota stone slab flooring 20-25mm thick over 20mm thick cement screed base in CM 1:6 laid and mirror polish to give high gloss finish, jointed with grey cement slurry mixed with pigment to match the shade of the slab including round nosing at corners, rubbing complete all as specified and directed by Engr-in-charge.
30
-
-
M&L for Kota stone slab 20-25mm thick in riser of step and skirting, dado pillar laid over 10mm thick screed bed complete all as specified and directed by Engr-in-charge.
10
-
-
Demolition of RCC of any description and in any position at any height not otherwise specially provided for complete all as specified and directed by Engr-in-charge. Note: Reinforcement cut as required to facilitate demolition.
0.52
-
-
M&L for cement concrete( 1:2:4) type B-0 12.5mm graded stone aggregate, in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, complete all as specified and directed by Engr-in-charge.
0.52
-
-
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc for fair finish surface complete all as specified and directed by Engr-in-charge.
6.9
-
-
M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide for fair finish surface complete all as specified and directed by Engr-in-charge.
60
-
-
M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engr-in-charge.
50
-
-
Taking down old existing roof treatment of any type including mud fuska any thickness & brick tile and removing from MoD Land complete all as specified and directed by Engr-in-charge. Note:- Rate of removal of debris outside from MoD land deemed to be included in the same item.
100
-
-
Cleaning of roof slab/chajja with sweeping with brooms, removing complete all as specified and directed by Engr-in-charge.
100
-
-
Demolition of cement concrete of any type description and in any position complete all as specified and directed by Engr-in-charge.
5
-
-
Cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry (1:3) complete all as specified and directed by Engr-in-charge.
10
-
-
M&L for Providing cement concrete (1:3:6) Type C0 using 12.5 mm graded stone aggregate in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified
0.5
-
-
Surface preparation of all foreign material such as grass roots dust/mud etc and roughening the concrete surfaces by wire brushes including 50 mm thick PCC 1:2:4 type B1 using 12.5 mm graded aggregate as in roof for maint the uniform slope and applying cement screed bed of 10 mm thick 1:4 with water proofing compound @ 3% weight of cement as per manufacture instruction with APP modified polymeric membrane centre core of 100 micron HMHDPE, weight not less than 3 Kg/Sqm and clear thickness of membrane not less than 3 mm thickness, on newly prepared surface with overlap while torching shall be 100mm on length side & 100mm on width side of membrane as per manufacturer instruction with the following description. (a) Apply evenly a coat of bituminous primer conforming to IS -3384 @ 0.40 Kg/Sqm. (b) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @1.20 Kg/Sqm as IInd course. (c) Laying of APP modified polymeric membrane as a IIIrd course. (d) A coat of bonding bitumen confirming to IS -702 of grade 85/25 @ 1.20 Kg/Sqm as a forth course.
100
-
-
M&L for Rolled Steel section (Fe -410, Grade E-250)as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed by Engr-in-charge.
100
-
-
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws to steel frame work, including dismantling of old sheet any type complete all as specified and directed by Engr-in-charge.
50
-
-
S&F factory made 18mm thick single extruded WPC solid plain white colour board Jali, CNC (computer numeric control) routed of approved design by Engr-in-Charge which are machine cut to duct/ shaft/ covering, partition and facades comprising of virgin polymer of K Value 58-60 (suspension grade) calcium carbonate and natural fibers (wood powder/rice husk/wheat hust/ and non toxic additive (maximum toxicity index of 12 to 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N(Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class 'A' category with properties of being termite /borer proof , water /moisture proof and fire retardant and fixing on MS(mild steel) frame made of 25x25x1.5mm square hollow box section including applying two coat of enamel paint over a primer coat of approved steel primer, placed a grid made at 1.00x1.00 mtr or as per requirement at site with necessary stainless steel fasteners and S S Screws all complete fittings and fixture complete all as specified and directed by Engr-in-charge. Note : Quoted rate included all above complete description.
31
-
-
M&L for 100 mm thick PCC 1:3:6 type C2 using 40 mm graded crushed stone aggregate as in PCC sub base, complete all as specified and directed by Engr-in-charge.
100
-
-
M&L for sand filling as sub base under interlocking tiles including watering and consolidating complete all as specified and directed by Engr-in-Charge.
2.5
-
-
M&L for Machine pressed precast concrete heavy duty interlocking rubber moulded paver block any shape any colour and size confirming to IS 15658-2006 of 80mm thickness M-40 grade In different colours laid over complete all as specified and directed by Engr-in-charge.
100
-
-
M&L for preparation of new plastered surfaces of walls and applying two coat of Oil Bound distemper over a coat of 1mm thick wall care putty on wall, complete all as specified and directed by Engr-in-charge.
300
-
-
M&L for preparation of new plastered surface of walls and applying two coat of exterior weather proof water base emulsion paint (APEX) of any color complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure upto 15mtr height.
1200
-
-
M&L for removal of old existing treatment of walls surfaces and applying a coat of white cement base wall care putty in patches as required and finished even and smooth with sand paper and applying one coat of exterior weather proof water base emulsion paint (APEX)in white or tinted complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.
17000
-
-
M&L for preparation of newly plastered surfaces and applying three coat of white wash on ceiling incl preparation of surfaces complete all as specified and directed by Engr-in-charge.
200
-
-
M&L for preparation of old surfaces including complete removal of old existing treatment of wall surfaces and applying two coat of Oil Bound distemper over a coat of 1mm thick wall care putty on wall complete all as specified and directed by Engr-in-charge.
6567
-
-
M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer etc complete all as specified and directed by Engr-in-charge.
63.4
-
-
M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of primer etc complete all as specified and directed by Engr-in-charge.
90
-
-
M&L for preparation of old painted wooden surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.
480
-
-
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be deemed to be included for work in buildings/structure of any height.
480
-
-
E/M Works
-
-
-
Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) fitting such as switches, ceiling roses, pendants, regulators, sockets etc complete removing material to store for keeping in safe custody and making good disturbed surfaces of walls, floors etc complete all as specified and directed by Engr-in-Charge.
70
-
-
M&L for concealed point wiring with single core PVC insulated and unsheathed 1100 volts grade cable with multistranded copper conductor of size 1.5 Sqmm nominal area drawn through & including non metallic rigid PVC conduit (circular/flat PVC conduit), medium duty not less than 20 mm dia concealed in wall/fixed with all fittings including tees, junction boxes, modular GI gang box & provision for modular box and modular cover of suitable size for mounting modular switches, sockets & regulators & drawing through continuous earth wire of PVC insulated unsheathed 1100 volts grade cable with copper conductor solid conductor of size 1.5 Sqmm complete all as specified and directed by Engr-in-Charge.
Note: 1) Cost for cutting chases and making good to match the existing surface shall be deemed to be included in the quoted rate.
2) Rates are deemed to be inclusive of Modular GI gang box & cover plates of any module & Qty as required on site.
-
-
-
For one light point/call bell controlled by one single pole switch & socket.
32
-
-
For one fan/exhaust fan point controlled by one single pole switch.
9
-
-
For one 3 pin sockets outlet 5 Amps on the same board with other switches with cable of size 1.5 Sqmm
10
-
-
For 3 pin socket outlet 5Amps independent with cable 1.5 Sqmm size
11
-
-
For one 3 pin sockets outlet 15 Amps independent with cables 2.5 sqmm size.
8
-
-
S&F of modular switches 1 way, 6 Amp 1 module complete all as specified and directed by Engr-in-Charge.
62
-
-
S&F of modular switches 2 way, 6 Amp 1 module complete all as specified and directed by Engr-in-Charge.
14
-
-
S&F of modular Socket, 6A - 2/3 pin combined 2 module with shutter, complete all as specified & directed by EIC.
21
-
-
S&F of modular switches 1 way, 16 Amp 1 module complete all as specified and directed by Engr-in-Charge.
56
-
-
S&F of modular Socket 6A/16A - 2/3 pin combined 2 module with shutter, complete all as specified and directed by Engr-in-Charge.
56
-
-
S&F in replacement of Single pole and neutral enclosure with a two pin and earth including plug and socket complete set with one single pole MCB of 20 Amps, complete all as specified and directed by Engr-in-Charge.
6
-
-
S&F of modular fan regulator 4 step, 1 module, complete all as specified and directed by Engr-in-Charge.
5
-
-
S&F of Modular Bell push 6A 1 module, complete all as specified and directed by Engr-in-Charge.
1
-
-
S&F in replacement of Ding Dong AC. 230 volts, single pole, complete all as specified and directed by Engr-in-Charge.
1
-
-
S&F of Ceiling Rose, 3 phase polycarbonate isolated body complete all as specified and directed by Engr-in-Charge.
41
-
-
Supply and fix in replacement of factory made epoxy polyester powder coated VTPN distribution board 8 way with incomer MCCB of 200Amps, 4 pole, 36KA, fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-54 protection) fixed on wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 6 outgoings confirming to IS: 8623 complete all as specified and directed by Engr-in-Charge. Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate.
1
-
-
Supply and fix in replacement of factory made epoxy polyester powder coated distribution board SPN 8 way fabricated from minimum 1.6 mm thick CRCA sheet with double door (IP-43 protection) fixed flush to wall and standard DIN rail, earth bar and cable ties for cable management, suitable for one incoming and 6 outgoings confirming to IS: 8623 complete all as specified and directed by Engr-in-Charge. Note: Cutting on wall and taking out old one and then flushing new DB and making all the connection as before and any accessories required to fix the DB including making good the disturbed surface is deemed to be included in quoted rate.
2
-
-
S&F in replacement of MCB SP 6-32 Amps, 10 KA 230 Volts, 50 HZ complete all as specified and directed by Engr-in-Charge.
12
-
-
S&F in replacement of MCB SPN 40 Amps, 10 KA 230 Volts, 50 HZ complete all as specified and directed by Engr-in-Charge.
1
-
-
S&F in replacement of MCB SP 63 Amps, 10 KA 230 Volts, 50 HZ complete all as specified and directed by Engr-in-Charge.
6
-
-
S&F in replacement of submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 4 Sqmm single core HR Grade and one run of 4 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ Geyser/ AC plug points complete all as specified and directed by Engr-in-Charge. Note :- (i) Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall complete all as specified and directed by Engr-in-Charge.
(ii) Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.
100
-
-
S&F in replacement of submain wiring with unsheathed multi-stranded FR Grade copper conductor cable 1100 volts grade drawn through in and including PVC rigid conduit medium grade of not less than 25mm dia with conduit accessories and concealed in wall/surface of ceiling for two runs of 10 Sqmm single core HR Grade and one run of 10 Sqmm PVC insulated copper conductor for earth continuity wire between main DB to Sub main DB/ Geyser/ AC plug points complete all as specified and directed by Engr-in-Charge. Note :- Two run of single core cable with one run of earth continuity conductor and PVC conduit and accessories will be measured as one length including cutting chasing in wall. Rates are deemed to be included for chases of conduit and sunking for boxes cutting and making holes in wall/floor for passing in or through conduit.
50
-
-
M&L in replacement of Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level, connected to galvanised iron strip 25×4mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated complete all as specified and directed by Engr-in-Charge.
3
-
-
S&F in replacement of LED retrofit tube light, 4 ft long of 20 watt, complete all as specified and directed by Engr-in-Charge.
56
-
-
S&F in replacement of LED 2 ft retrofit tubelight of 10 watt, complete all as specified and directed by Engr-in-Charge.
11
-
-
S&F in replacement Powder coated pressure die cast aluminium compact LED building light/ street light of 45watt confirming to IP 65, complete all as specified and directed by Engr-in-Charge. Note: Twin core copper wire of 1.5 Sqmm upto 7Rm required for connection of street light fitting is deemed to be included in quoted rates.
2
-
-
Supply and laying in replacement of galvanised steel water tubing medium grade in trenches / wall /floor with all fittings, connections as required at site of size 20 mm bore, complete all as specified and directed by Engr-in-Charge.
30
-
-
All as per Item No 158 Above but Bore of pipe 25 mm, complete all as specified and directed by Engr-in-Charge.
50
-
-
All as per Item No 158 Above but Bore of pipe 50mm, complete all as specified and directed by Engr-in-Charge.
15
-
-
S&F in replacement of Stop valve gun metal valve with iron handle screwed both ends for iron pipe and fixed of size 20 mm bore, complete all as specified and directed by Engr-in-Charge.
2
-
-
All as per Item No 161 Above but Bore of pipe 25mm, complete all as specified and directed by Engr-in-Charge.
2
-
-
All as per Item No 161 Above but Bore of pipe 50mm, complete all as specified and directed by Engr-in-Charge.
1
-
-
S&F in replacement of GI union of 20 mm ISI marked complete all as specified and directed by Engr-in-charge.
4
-
-
All as per Item No 164 Above but Bore of pipe 25mm, complete all as specified and directed by Engr-in-Charge.
4
-
-
All as per Item No 164 Above but Bore of pipe 50 mm, complete all as specified and directed by Engr-in-Charge.
1
-
-
Supply and fixing in replacement of PVC float valve, high pressure (ball cock bady with epoxy coated aluminium rod & HD ball) of size 25 mm dia.including all fittings, complete all as specified and directed by Engr-in-Charge.
2
-
-
Supply and fixing in replacement of PVC float valve, high pressure (ball cock bady with epoxy coated aluminium rod & HD ball) of size 20 mm dia.including all fittings, complete all as specified and directed by Engr-in-Charge.
2
-
-
Excavation in trenches in soft / loose soil nexc 1.5 mtr wide and not exc 1.5 m in depth etc complete and getting out in soft soil inciuding trimming sides and bottom of trenches complete all as specified and directed by Engr-in-Charge.
3
-
-
Retuning filling in trenches including watering and well ramming in layer not exc 25 cm thick in soft/ loose soil complete all as specified and directed by Engr-in-Charge.
2
-
-
Removing excavated surplus soil to a distance not exc 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%