Military Engineer Services Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Costs
EMD
₹ 30,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_695165_1Tender No
8024/A/T-58/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with water proofing compound by weight as per manufacturer's instructions, surface finished even and fair with and including necessary scaffolding up to (G+3) storey complete all as specified and as directed.
150
-
-
... More
M&L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel,slab,chaja pardi, railing etc, cleaning thoroughly exposed reinforcement, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fix of chicken wire mesh of size (50 x 50) mm of 1 mm dia wire, weight not less than 0.55 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying rendering 10 mm thick plaster in cement mortar (1:3), after second layer 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4), surface finished even and fair with water proofing compound by weight as per manufacturer's instructions, removing the debris outside MD land including material and labour for necessary scaffolding and formwork (G+3) storeys and safety arrangement complete all as specified and as directed. Note:- The finish of the surfaces shall be matched with the existing surface. The agency of guniting work shall be approved by the GE.
30
-
-
... More
M&L for removing loose, disturbed or disintegrated old concrete surfaces of RCC beam, column, lintel, slab, chhajja, pardi, railing etc, cleaning thoroughly exposed reinforcement, by sand blasting using suitable pump as directed by the GE, preparing exposed concrete surfaces to receive guniting, applying one coat of anti corrosive paint to the exposed reinforcement, supply and fixing welded wire mesh of size (100 x 100)mm of 3 mm dia wire, weight not less than 1.37 Kg/Sqm & binding with 22 guage mild steel (annealed) binding wire to reinforcement and applying pressure guniting in cement mortar (1:3), average 30mm to 50mm thickness and thereafter rendering 10 mm thick plaster in cement mortar (1:3), mixed with water proofing compound @2% by weight of cement and finishing the surfaces even and smooth without using extra cement to match with the existing surfaces, removing the debris outside MD land including material and labour for necessary scaffolding and formwork (G+3) storeys and safety arrangement for guniting work complete all as specified and as directed. Note:- The finish of the surfaces shall be matched with the existing surface. WPC shall be measured & paid separately under respective item as supply only. The agency of guniting work shall be approved by the GE.
200
-
-
... More
S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending separately for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
50
-
-
... More
S&F 5 to 10 mm dia TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking endsstrrrups and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
25
-
-
... More
Supply only Integral Water Proofing compound complete all as specified and as directed.
20
-
-
... More
M&L for preparing plastered or unplastered new surfaces on ceilings including brooming down or steel wire brushing, scraping down and applying two coats of white wash complete all as specified and as directed.
100
-
-
... More
M&L for preparing old surfaces on ceilings including brooming down mechanicaly, scraping down and applying two coats of white wash complete all as specified and as directed.
300
-
-
... More
M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistent primer over 3mm thick cement base wall care putty up to double storey buldings complete all as specified and as directed.
150
-
-
... More
Complete removal of existing treatment from external surfaces of walls & ceilings mechanicaly and washing rubbing down and stopping of surface holes and cracks using necessary filling compound of white cement and fine sand in the ratio of (1:3) to obtain smooth regular/even finish using sand paper with and including applying two coats of oil bound distemper over a coat of alkalic resistent primer over 3mm thick (average) cement base wall care putty complete all as specified and as directed.
500
-
-
... More
M&L for preparation of new plastered surface of walls, chhajjas, soffits & beam including necessary scaffolding and applying two coats of acrylic smooth exterior paint of required shade 1.43 ltr/10sqm over a coat of exterior primer 2.20 kg/sqm over 3mm thick cement base wall care putty complete all as specified and as directed or as per manufacturers instructions.
380
-
-
... More
M&L for complete removal of existing surface of walls, chajjas, soffits & beam including necessary scaffolding and applying two coats of acrylic smooth exterior paint of required shade 1.43 ltr/10sqm over a coat of exterior primer 2.20 kg/sqm over 3mm thick cement base wall care putty complete all as specified and as directed or as per manufacturers instructions.
500
-
-
... More
M&L for prepration of old decorated plastered surfaces of walls /ceilings, removal of nails etc & filling cracks/hole by applying cement base wall care putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat oil emulsion distemper white or coloured complete all as specified & as directed.
1500
-
-
... More
M&L for complete removal of existing treatment from old decorated plastered surfaces of walls/ceilings by removal of nails etc & filling cracks/hole with putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying two coats of oil bound distemper white or coloured by roller complete all as specified and as directed or as per manufacturers instructions.
1500
-
-
... More
M&L for applyying 1mm thick cement base wall care putty on wall complete all as specified & as directed.
100
-
-
... More
M&L for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying one coat of cement base paint complete all as specified and as directed. Note:- The work shall be carried out upto four storey. Necessay scafolding upto four storey bldg shall be deemed to be included in unit rates.
2000
-
-
... More
M&L for preparation old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss and efflorescent salts and trading oily and greasy spots by scraping and washing with water and applying two coats of cement base paint complete all as specified and as directed. Note:- The work shall be carried out upto four storey. Necessay scafolding upto four storey bldg shall be deemed to be included in unit rates.
500
-
-
... More
M&L for preparation of plastered or un plastered old decorated surfaces of walls removal of nails etc & filling cracks/hole by applying cement base wall care putty as required (multipurpose mixer shall be used for uniform and proper mixing of putty) and applying one coat of exterior emulsion paint 100% acrilic of approved white or coloured complete all as specified & directed. Note:- The work shall be carried out upto four storey. Necessay scafolding upto four storey bldg shall be deemed to be included in unit rates.
500
-
-
... More
M&L for preparation of new or previously untreated surfaces of wood of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over over a coat of pink primer complete all as specified and as directed.
50
-
-
... More
M&L for preparation of new or previously untreated surfaces of steel of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
50
-
-
... More
M&L for preparation of old painted surfaces of wood and wood based material of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
100
-
-
... More
Material and labour for preparation of old painted surfaces of steel and iron surfaces of any description not otherwise described over 10 cm width & girth and applying one coat of synthetic enamel paint complete all as specified and directed. Note for item No 12 to 25 :(i) Shade of the paint shall be approved by Engineer-in-Charge. (ii) Complete work shall be strictly executed by mechanical means / tools / machines required for smart periodicals i.e. vacuume based sanding machine, mechanical mixer, grinder and rollers etc and the cost of T&P required is bear by contractor & included in this item (iii) Removing /cleening of painting matarial in floor /wall tiles etc bear by contractor & included in this item.
100
-
-
... More
M&L for special treatment for sunken portion of WCs/Bath & toilet etc executed in following stages:-
Stage 1: Providing 15mm thick plaster in CM (1:3) mixed with water proofing chemical of Dr.Fixit or Shalicrete 'R' of STP Ltd in the proportion/quantity all as per manufacturer's instructions.
State 2 : Primer-Mix Tarfelt LM of STP Ltd (diluted with water in ratio 1:1) @ 250 gms/sqm and apply the primer on the plastered surfaces.
Stage 3 : Application of 1st coat of Tarfelt LM of STP Ltd (without dilution with water) @ 1Kg/Sqm by brush all as per manufactuer's instructions.
Stage 4: Laying fyber glass cloth (weight not less than 50gram/ Sqm) over the 1st coat while the coated surface is still sticky.
Stage 5: After 6 to 7 hours interval, apply second coat i.e. final coat of Tarfet LM of STP Ltd (without Dilution with water) @ 1kg/ Sqm by brush as per manufacturer's instructions.
Stage 6: Providing 10mm thick protective plaster in CM 1:3 mixed with STP No. 1 @ 250ml/50 Kg cement all as per manufacturer's instructions.
Stage 7: Carryout ponding test for 48 hours to ensure water tightness of repaired sunken portion. NOTES :- (i) Mode of measurement shall be actual area treated (floor and adjoining walls).
8
-
-
... More
Demolition of stone slabs and tiles laid beded and pointed in any mortar of any description or thicknes in floors , aprons etc complete all as specified and as directed.
3
-
-
... More
M&L for joint free non skid coloured ceramic tiles, 7 to 8mm thick (squre or rectangular) area of each tile n.exc. 0.11sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces with and including laid over 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
30
-
-
... More
M&L for joint free coloured glazed ceramic tiles in vertical surfaces (300x200)mm x 7mm thick/ (450x300)mm x 7mm thick, set and jointed in cement slurry and pointed in white or coloured cement to match with and including laid over 15mm thick cement rendering in cement mortar (1:4) complete all as specified and as directed.
50
-
-
... More
Taking down AC or PVC pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.
10
-
-
... More
Taking down CI pipes of 100/110mm dia of any description including all fittings complete all as specified and as directed.
10
-
-
... More
Taking down CI pipes of 75/80mm dia of any description including all fittings complete all as specified and as directed.
5
-
-
... More
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable PVC clamps at one meter of interval complete all as specified and as directed.
10
-
-
... More
S&F PVC (SWR) bends of radius, suitable for 110mm dia PVC pipes complete all as specified and as directed.
4
-
-
... More
S&F 75mm bore cast iron waste and vent pipe in any length with or without ears fixed to floor/ walls including suitable clamps after every one mtr of interval with cement joints fixed to wall complete all as specified and as directed.
5
-
-
... More
S&F 100mm bore cast iron waste and vent pipe in any length with or without ears fixed to walls/floor etc with cement joints fixed to wall including suitable clamps after every one mtr of interval complete all as specified and as directed.
10
-
-
... More
S&F CI 100mm bends with door complete all as specified and as directed.
4
-
-
... More
S&F cast iron floor trap with grating incuding jointing to waste pipe fixed in cement concrete (1:2:4) type B1 of 75 mm dia out let including jointing with solvent cement complete all as specified and as directed.
4
-
-
... More
Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris out side defence land from the site complete all as specified and as directed.
2
-
-
... More
M&L for PCC (1:2:4), type B-0, (using 12.5 mm graded stone aggregate) as in roof padding 50 mm average thickness to maintain slope etc complete all as specified and as directed.
6.25
-
-
... More
M&L for preparation of plastered/concrete surfaces of roof and applying the under mentioned course of roof treatement complete all as specified and directed by Engineer-in-Charge.:-
(a) Plastering 10mm thick in cement mortar (1:4) on concrete surfaces using WPC @3% by weight of cement, surface finished even and smooth
(b) Surface shall be throughly wire brushed, cleaned, washed, dried up properly and apply evenly a bituminuous primer coat conforming to IS @0.4 ltr /Sqm over concrete / plastered roof surface.
(c) Laying of 3mm thick APP membrane sheet (min weight 3 Kg/Sqm) consisting of a core of 160 gms/Sqm polyster non woven fabric mat protected on both sides with a high quality polymeric asphaltic mix again protected with thermo fusible HMHDPE FILM on dried primed surface by torch application method. APP membrane will normally be laid in length at right angle to the direction of slope. The over lap shall be minimum 100mm on longitudinal direction and 150mm on the transverse direction including cuttings, grooves etc.
(d) Membrane bonded completely to the substrate & the over laps are then scaled/fused by flame.
125
-
-
... More
M&L for cement concrete tiles (20cm x 20cm) x 20mm thick machine pressed, set & pointed in neat cement slurry in floor with grey cement and no pigment and cut and polished on roof over and including 15 mm thick screed bed in CM (1:4) complete all as specified and as directed.
100
-
-
... More
Taking up or down 15 to 25 mm bore steel tubing and connections in walls, ceiling, floors, etc including cleaning for refixing or removal to store complete all as specified and as directed.
50
-
-
... More
S&F tubes, medium gade 15mm dia, galvanized with all fittings and fixed (concealed type) complete to walls and ceiling or laid in foors complete all as specified and as directed.
30
-
-
... More
S&F tubes, medium gade 20mm dia, galvanized with all fittings and fixed (concealed type) complete to walls and ceiling or laid in foors complete all as specified and as directed.
15
-
-
... More
S&F tubes, medium gade 25mm dia, galvanized with all fittings and fixed complete to walls and ceiling or laid in foors complete all as specified and as directed.
5
-
-
... More
Disconnecting existing water tank of any description 500 litres but n. exc 1000 litres capacity in any position, setting aside for repairs, cleaning and removing all scales, dirts etc from tank and mouth of circulating pipes etc and re-fixing in position complete all as specified and directed.
4
-
-
... More
Dismantling water tanks exc 250 & n exc 500 Ltrs capacity and removing to store complete all as specified and directed.
4
-
-
... More
S&F 500 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top), three layered, hoisted and fixed in position complete all as specified and as directed.
4
-
-
... More
S&F ball brass valves, 20 mm bore, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.
8
-
-
... More
S&F gun metal globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipecomplete all as specified and directed.
2
-
-
... More
S&F gun metal globe or gate valves, 25 mm bore, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
2
-
-
... More
S&F in repairs 10 litres capacity PVC valveless symphonic action type flushing cistern (Economy dual flush) low level, white, with inlet, ball valve, float and handle including brackets and brass CP flush pipe long bend complete all as specified and directed. Make:- Parryware Cat No C-8109 or equivalent as per list of makes.
5
-
-
... More
S&F in repair WC Orissa pattern white with integral foot rest (580x440)mm including trap set, PCC bed and making good disturbed floor connecting to flush pipe complete all as specified and directed.
4
-
-
... More
S&F in repairs 15 mm dia long body bib taps fancy type cast copper alloy chromium plated handle, screwed down, screwed for iron pipe or for brass fernile complete all as specified and directed.
20
-
-
... More
S& F in repairs 15 mm dia type pillar taps swan neck fancy type, cast copper alloy, with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.
10
-
-
... More
S&F in repairs 15mm bore CP angular valve ( fancy type), screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unioncomplete all as specified and directed.
18
-
-
... More
S&F in repairs 15mm bore (concealed type) stop cock long shank and long threading chromium plated of screwed down to iron pipes, high pressure complete all as specified and directed.
4
-
-
... More
S&F for CI 100mm single branch piece with door complete all as specified and directed.
2
-
-
... More
S&F for CI 75mm bends with door complete all as specified and directed.
5
-
-
... More
S&F for cast iron cowls 100 mm size complete all as specified and directed.
2
-
-
... More
S&F in repair salt glazed stone ware gulley traps (150x150)mm size square mouthed type ‘P’ including CI cover complete all as specified and as directed.
2
-
-
... More
S&F in repair looking mirror of size (600x450)mm, bevelled edges of selected quality glass, mounted on 6mm thick commercial ply or AC plain building board with aluminium frame around and fixed to wooden plugs with CP brass screws etc complete all as specified and as directed.
5
-
-
... More
S&F in repairs brass chromium plated tubular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
5
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area n. exc 1.5 Sqm each and removing from site and making good the disturbed protion in CM (1:3) or PCC (1: 2:4) type B1 complete all as specified and directed.
20
-
-
... More
Taking down chowkhats or frames with shutters (without taking off shutters from the frames) area exc 1.5 Sqm but n exc 4.0 sqm each and removing from site and making good the disturbed protion in CM (1:3) or PCC (1: 2:4) type B1 complete all as specified and as directed.
15
-
-
... More
Taking down shutters of any description area exc 1 Sqm and not exc 2 Sqm each complete all as specified and as directed.
10
-
-
... More
Demolition of cement concrete/terrazzo (unreinforced) of any description in ground floor and paving n. exc 15cm thickness (below or above ground level) including removing the rubbish/debris out side defence land complete all as specified and as directed.
2
-
-
... More
Dismantling plain or corrugated steel sheeting , any gauge, thickness, including naintal similar pattern roof coverings complete all as specified and as directed.
20
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and as directed.
0.25
-
-
... More
M&L pressed steel frame of frame (105 x 60) mm and 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate, hold fast etc complete all as specified and as directed.
10
-
-
... More
M&L pressed steel frame of frame (125 x 60) mm and 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock/ strike plate, hold fast etc complete all as specified and as directed.
20
-
-
... More
S&F rolled mild steel grade Fe-290 Gde-E-165 quality-A as in framed work as in doors or gates of angle or other section gates of with gusset plates, rails, cladding, chowkhats/frame or like etc welding hold fast, hinges complete all as specified and as directed.
75
-
-
... More
S&F 35 mm thick flush shutter solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
15
-
-
... More
M&L for 2nd class hard wood factory made 35mm thick glazed and skelten shutters open repated and prepared for door to receive framing plain chamfered or rounded fitted with cut and mitered head s for securing glass/wire mesh etc size of member of shutter with sash bar complete all as specified and as directed.
15
-
-
... More
S & F 35 mm factory made plain frame panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commecial ply or 12 mm veneered particle board with commercial veeneering on both faces. The size of both rail and stile as per SI-1003 (Part-I), Kiln seasoned and chemically pressure treated.
10
-
-
... More
S&F window/Ventilator section of frame (72 x 55) mm fixed to wall or concrete surface with MS hold fast (30 x 5)mm section 150 mm long made of galvaniszed steel powder coated and section of shutter (47 x 20) mm, mulion section (72 x 50) mm (base steel as per IS 513 'D' quality galvanzed as per IS 277 with zinc of 120 gms/Sqm) glazed or gauzed and wire gauze shutter (Double door shutter) with total coated thickness of 0.60 mm including powder coated grill/guard bars made of square bars 10 mm dia at 150 mm c/c horizontal spacing fixed in MS flat frame (30 x 5) mm fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40 mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2.
10
-
-
... More
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
2
-
-
... More
S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.
2
-
-
... More
S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet used instead of plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.
50
-
-
... More
S&F PVC flush door solid panel fancy type both side with teak wood finish 30mm thick consisting of panel of hollow PVC profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mmx19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mmx19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc. complete all as per direction of Engineer-in-Charge, manufacturer's specification and drawing.
15
-
-
... More
S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with particle board core 2, 4 or 6 raised panel design with both side 2mm thick 3D wood grain moulded PVC sheet polyurethane painted on the front face & back face, supplying & fixing in frame at site as per specification & drawing.
15
-
-
... More
M&L for cement concrete (1:2:4) type B-1 (using 12.5mm graded stone aggregate) for fixing of hold fasts and clamps etc complete all as specified and as directed.
0.2
-
-
... More
S&F clamps; hold fast; bands, straps, supports or stays for galvanised plain mild steel wire including bolts, rainwater, ventilating pipe and simillar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.
2
-
-
... More
S&F MS butt hinges 100mm size, cold rolled, medium weight fixed with screws to wooden frames or welding to steel frames etc complete all as specified and as directed.
50
-
-
... More
S&F aluminium anodized barrel tower bolts of extruded section length of bolt 150mm long complete all as specified and as directed.
50
-
-
... More
S&F extruded aluminium alloy handles, fabricated type, anodised, 125 mm size complete all as specified and as directed.
50
-
-
... More
S&F aluminium sliding door bolt, 300 mm long, with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections or cast aluminium alloy including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.
15
-
-
... More
S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.
0.15
-
-
... More
S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30mm complete all as specified and as directed.
25
-
-
... More
S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass polished complete all as specified and as directed.
20
-
-
... More
M&L 18/19 mm thick preleminated particle board, interior grade, predominated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber framework including 10 mm thick IInd class H.W looping all round as in shelves of design as approved by Engineer in charge. etc with and including dismantling boarding any description fixed with screws complete all as specified and directed by Engr-in-Charge.
15
-
-
... More
S&F sheet glass 3 mm thick ordinary quality fixing to steel/aluminium window shutters in any position with new beads/ steel section as required for securing complete all as specified and as directed.
10
-
-
... More
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apertupre 1.40mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.
10
-
-
... More
S&F in repair 25 mm dia aluminium Drapery rod, PVC coated finish including teak wood brackets & end knob as required with teak wooden curtain rings complete all as specified and as directed.
20
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premices complete all as specified and directed.
25
-
-
... More
M&L for joint free anti skid coloured ceramic tiles, 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but n.exc. 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the tile, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed.
25
-
-
... More
Description all as per ser item No. 104.00 above but as in skirtings laid over 10mm thick plaster in CM (1:4) complete all as specified and as directed.
2
-
-
... More
M&L for Granite (18-20mm thick) work in counter for cooking & W.H.B platform including moulding of edges over 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite including cutting for hole and mirror polishing complete all as specified and as directed. Note:-(a) The cost of moulding shall be deemed to be ioncludded in unit rate.
4
-
-
... More
Demolition of brick work built in cement mortar, including all quoins, arches, pillars etc of any description including removing debrish from site complete all as specified and as directed.
2
-
-
... More
M&L for brick work with sub class `B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed.
2
-
-
... More
M&L for 75 mm thick cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) as in plinth protections, surface finished even and smooth without using extra cement complete including use and waste of necessary form work complete all as specified and as directed.
20
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%