Military Engineer Services Tender

Dismantling RCC Jafri/jalli any size or type complete all as specified and directed.

S&F precast cement jallies type B-0, 1:2:4 mix (using 12.5mm graded stone aggregate) 35mm thick (Measured solid) set in cement mortar 1:4 including all mouldings but excluding frame complete all as specified and directed.

Taking down cement plaster of any description on brick or stone wall incl raking out joints, hacking for key, scurbing down with water etc Complete all as specified and directed by Engineer-in-Charge.

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surface finished fair and even complete all as specified and directed.

Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.

M&L for preparation of Old plastered surfaces of walls and applying one coats of cement base paint complete all as specifed as direted by Engr-in-charge.

Material and labour for preparation of old plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of DULUXWeather shield Max or APEX ULTIMA from Asian paint from the same manufacturer white lime wash complete all as specified and directed. Notes for item Nos 8 & 10: (a) The work shall be executed through authorised applicator of manufacturer only. (b) Authrised Applicator shall be approved by GE before starting of work. (c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material. Engineer-in-Charge shall deface the original purchase vouchers. (d) MOU with authorized applicator will be submitted by contractor within 7 days after opening of Financial Bid. (d) A guarantee amount of 5% of contract of work done for item Nos 8 & 10 of BOQ will be retained for 5 years of the completion of work.

Demolition of concrete and pavings n.exc 15 cm thickness (below or above ground level).

M&L providing CM 1:2:4 Type B-1 12.5 mm graded agg. In precast coppings incl slightly rounded chemered angles and throating including necessary form work complete.

Demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for PCC 1:2:4 B1, 20mm graded stone aggregate as in surface channels and drains.

Extra forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement including forms, mould, mitred/stopped ends etc.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors 75mm dia fixed in repairs Complete including dismantling all as specified and directed by Engineer-in-Charge.

M & L for 75 mm thick cement concrete type D-2, 1:4:8 (40 mm graded stone aggregate) as in sub base Complete all as specified and directed by Engineer-in-Charge.

M&L for providing 75 mm thick cement concrete 1:2:4 type B2 (40 mm graded aggregate) as in hard standing laid in alternate bays Complete all as specified and directed by Engineer-in-Charge.

M&L for providing 100 mm thick cement concrete 1:2:4 type B2 (40 mm graded aggregate) as in hard standing laid in alternate bays Complete all as specified and directed by Engineer-in-Charge.

S&F Endura cement concrete colour tiles 300cm X 300cm x 18 to 20 mm thick set, jointed and pointed in neat cement slurry in floors with grey cement and pigments incl 15 mm thick screed bed or bedding layer for laying floor finishes of tiles CM 1:6 Complete all as specified and directed by Engineer-in-Charge.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc Complete all as specified and directed by Engineer-in-Charge.

M&L for sand filling under floor or in foundations including watering and consolidation Complete all as specified and directed by Engineer-in-Charge.

M&L for machine pressed precast concrete interlocking paver block 80mm thick any shape and size with grey cement and pigment Complete all as specified and directed by Engineer-in-Charge.

M&L for providing cement concrete type C-1 1:3:6 (20mm graded aggregate) as in copings Complete all as specified and directed by Engineer-in-Charge.

Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground Complete all as specified and directed by Engineer-in-Charge.

Dismantling fencing wiremesh, any type Complete all as specified and directed by Engineer-in-Charge.

Excavation in post holes (or similar holes) n exc 0.5 cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface Complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete Complete all as specified and directed by Engineer-in-Charge.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc including embeding in concrete and similar work conforming to Fe-290 Gde-E-165 Complete all as specified and directed by Engineer-in-Charge.

All as per S.No. 29 here in before but except iron

S&F high quality zinc coated GI Chain link fencing of required width made of GI wire dia not less than 75X75X3mm and fix with column with nut or bolts and strengtheing with 10mm TMT bars, conforing to standard grade steel complete all as specified and directed. NOTE:- (i) Payment of TMT bar and nuts bolts shall be made in seperate items in this Schedule.

S&F 10mm dia MS Bars Horizontal in Chain Link fencing all as specified and directed by Engr-in-Charge.

S&F 12mm mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long Complete all as specified and directed by Engineer-in-Charge.

S&F in repair galvanized 2 strand steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straning and fixing to fencing post with staple or steel pins etc Complete all as specified and directed by Engineer-in-Charge.

Dismantling of wrought iron or mild steel work of any description Complete all as specified and directed by Engineer-in-Charge.

S&F Framed mild steel work as in doors or gates of angle or other sections with gusset plates, rails, braces, tank stagging etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings(exclusive of steel sheeting or other covering, running rails and gurders) and hanging also fastening and complete all as specified and directed (Fe-410-W(Gde E-250)Quality-A).

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic anamel paint over one coat of red oxide Complete all as specified and directed by Engineer-in-Charge.

Taking down old fibre glass reinforced translucent plain sheeting Complete all as specified and directed by Engineer-in-Charge.

S&F in repairs 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew.

S & F in repairs for MS gaslvanised punched tape concentina coil of 600 mm dia coil fixed with any type of angle and binding with and incuding mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

S & F in repair precast fibre reinforced cement concrete Manhole/ perforated drain cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mm x70 mm omplete all as specified and as directed.

Schedule of Credit