Military Engineer Services Tender

Supply, installation, testing and commissioning of architectural RGBW (W=4000K) LED flood light with integral driver & housing made of Die-cast aluminium alloy . The luminaire shall be min 238 X 140 X 149mm. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The nominal weight of the luminaire shall not be more than 3KG. The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 10° beam angle (±10%) & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 50W and system lumen output of not less than 2400 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours complete all as specified and directed. Make : Signify ( Philips) or equivalent in iGuzzini, Linealite, martin & We -ef

Supply, installation, testing and commissioning of Circular shape architectural RGBW (W=4000K) LED flood light with integral driver & housing made of Die-cast aluminium alloy. The luminaire shall be min dimentions of 348 X 140 X 149mm. The luminaire shall have electrostatically applied polyester powder coating finish. The luminaire bracket shall be made of cold-rolled steel & shall be so designed that the luminaire can be tilted to ±90°. The bracket shall have locking mechanism to fix & secure the desired tilt angle. The luminaire shall have silicon gasket between optical cover & LED chamber to ensure proper IP66 protection. The luminaire must have a breather gland. The nominal weight of the luminaire shall not be more than 6.2KG. The luminaire shall be equipped with high-power Cree, osram, lumiled or equivalent. The fixture shall have 3° beam angle & the lens shall be made of anti-aging & anti UV-PMMA material. The optical cover shall be made of IK06 rated clear tempered glass. The LEDs shall have minimum CRI ≥80 for white light & shall have SDCM≤4. The fixture shall come with power & DMX cable of minimum 100mm length. The fixtures shall be installed with have IP67 connectors. The luminaire shall have system wattage not exceeding 80W and system lumen output of not less than 4200 lumens. Fixture shall operating temperature range of -40°C to 50°C. The fixture shall have an integral driver with input voltage for 220-240 VAC, 50/60Hz. The luminaire shall have declared life of 50,000 burning hours at L70 @ 35deg. The luminaire shall have class I insulation. The luminaire shall be compatible with DMX512 controller. The luminaire shall automatically addressable using hand-held addressing device. The luminaire shall give feedback on luminaire address & status (ON & Off). The luminaire shall be capable of 8-bit control of RED, Green, Blue & White (W=4000K) to produce 16.7million colours complete all as specified and directed. Make : Signify ( Philips) or equivalent in iGuzzini, Linealite, martin & We -ef

Supply, installation, testing and commissioning of exterior IP68 LED RGB/RGBW Flexible light strip of 5 mtr standard length with 10-15 Watt per meter which can be compatible with the DMX / Ethernet controller. Minimum System lumens of minimum 450 lumens/meter and System Lumen Efficacy 30lm/w. Luminaire light beam spread - 110°, The Strip should have IP 68 protection and is offered IP 67 rated connector to join the LED Strips incontinuity. The luminaire must be offered with Aluminum channel for mounting the strip lights. The product should be complete with all accessories and Driver. The successful bidder shall submit the following certifications/reports for approval before supply of materials: product data sheets, LM79 report from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance alone with CE certificate. The bidder shall upload the luminaire BIS certificate along with technical bid. The luminaire shall be supplied with necessary connectors for connecting lead/jump cables complete all as specified and directed. Make : Signify ( Philips) or equivalent in iGuzzini, Linealite, martin & We -ef

Supply and fixing of IP65 150W 24V driver complete all as specified and directed.

Supply and fixing of DMX decoder complete all as specified and directed.

Supply and fixing of AL profile(1m) complete all as specified and directed.

Supply and fixing of ZGC 301 IP connector (10Bags of minimum 10 Piece Each bag) complete all as specified and directed.

Supply, installation, testing and commissioning of Compact master Content Program Controller (DMX controller) with capability to control minimum 8 DMX512 universes, playback scenes and animations stored in its SD card, and it can be used for offline scenes scheduling, setting brightness, white balance and playback speed adjustments. It should be able to amplify the DMX signal in cascaded connection & support automatic playback scheduling. It should support power-on startup and scheduled timing start along with capability of unattended operation and remote scene triggering if needed. The Content Program Controller shall have integrated LCD display & support IR remote control. The dimensions of the Content Program Controller shall be approximately 278X193X66 mm (±10%). It should be housed in aluminium casing. The Input voltage shall be 12VDC & shall have 2 RJ45 ports on Input side. The IEC classification shall be Class III. It should operate on DM512 protocol. The output shall have 8 X 3P lockable terminals. The power consumption shall be 8W (±10%). The Content Program Controller shall have one SD card slot for maximum 32GB card & the SD card being used shall be FAT32 format. The Content Program Controller shall come with 220-240V to 12V DC power supply. The IP rating of content program controller shall be IP20 & shall comply to CE, CB & CQC certifications. The DMX controller/content program controller shall be from the same make/brand/manufacturer as that of façade lighting luminaires. The working temperature range shall be -30°C to 50°C. The successful bidder shall submit the technical data sheet for approval before supply of material complete all as specified and directed. Make : Signify ( Philips) or equivalent in iGuzzini, Linealite, martin & We -ef

Supply, installation, testing and commissioning of RDM-6Wall Splitter & Booster,should be able to provide 6-output DMX/RDM splitter with DMX/RDM pass-through supporting bi-directional communications for discovery, addressing and DMX control of Ethernet/DMX products.This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6x32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Surface or DIN-rail mountable,Isolated DMX/RDM Input/Outputs,Automatic switching between DMX and RDM mode for auto-discovery, Environment-IP20, Interior applications,Finish/Color-Polycarbonate, Certification: CE Certified complete all as specified and directed. Make : Signify ( Philips) or equivalent in iGuzzini, Linealite, martin & We -ef

Supply and fixing of 4P DMX leader cable for connecting luminaire with power supply having length min 2m length (min 10 nos in 1 packet) complete all as specified and directed.

Supply and fixing of endcap male connector (20 pcs) complete all as specified and directed.

Supply and fixing of endcap female connector (20 pcs) complete all as specified and directed.

Supply and fixing of 5P DC/DMX leader cable for connecting luminaire with power supply having length min 2m length (min 10 nos in 1 packet) complete all as specified and directed.

Supply and fixing of 5P DC/DMX jumper cable for interconnecting the façade luminaires having length min 2m length (min 10 nos in 1 packet) complete all as specified and directed.

Programming for lighting management system includes addressing for all smart lighting fixture along with mapping on connected system. All fixture to be programmed as per the site requirement. Min 5 Scenes to be created & configure on smart keypad for ease of operation of smart light system complete all as specified and directed. Note 01:- (a) The work has to be executed through OEM/OEM authorised agency only. (b) The contractor must sign bid specific MoU with the OEM for execution of workthrough OEM/OEM authorised agency. (c) The contractor must submit the copy of the MoU signed with OEM at the time of submission of Technical bid, falling which his technical bid shall be summarily rejected. Note 02 :- For item No 01 to 18:- (a). The quoted rates also include the cost of 2 run conduit of 25mm for power cable and Data cable. (b). The quoted rates also include the cost of required 2.5 and 1.5 sqmm wire for connections(03 run cable) for Phase, Neutral and earth wire as per OEM recommendation. (c). The quoted rates also include the cost of Cat6/control cable(beldon DMX cable) as per OEM recommendation. (d). The quoted rates also include the cost of necessary junction boxes with IP 66 protection, connectors drivers, shaddle, flexible conduit, assembly bracket, metal gauge, cable tray, point wiring, switch, socket etc. as per OEM recommendation

Supplying, fabrication, installation, testing and commissioning of LT panel not less than 3mm thick made out of modular polycarbonate thermoplastic enclosures outdoor type, factory made CPRI approved,floor mounting type, environment friendly,recyclable,UV resistant,halogen and silicon free,anti-acid and anti corrosive,IP-65 Protection in accordance with IEC 60529.The gasket material shall be plyurethane while the gas/ket shall be internally embedded including suitable working space suitable for 3 phase 4 wire system 415V,50HZ,AC supply and fixed on raised PCC base 1:2:4,type B1 (20mm graded aggregate) raised base with cable glands, phase indicators, internal wiring,CT of suitable Ratio,digital voltmeter and ammeter, air passing holes with proper spacing to accommodate to all control switches and other accessories, cable connections with suitable size of lugs/thimble etc including suitable size canopy to cover the panel with proper fixing arrangement including excavation and earth work including dismantling the unserviceable panel complete all as specified and directed and comprising the followings. Incoming:- (a) MCB TPN 40 Amps Pole,- 01 No (b) Power contactor- 32 Amps (c)Surge protection device- 01 No (d) RYB Indicating lamp (e) Digital Voltmeter and ammeter of suitable rating (f) Start/stop Push Button-1 No (g) Over voltage/under voltage relay-01 No Outgoing:- (a) MCB SP 06-32 Amps - 14 Nos

Supply, installation, testing and commissioning of single phase voltager stabilizer of capacity 05 KVA, Minimum input voltage 90-130V, minimum output voltage130V, maximum output voltage 290-300 Volts including digital display,digital indicators,over volt protection and overload protection complete all as specified and directed by Engr- In- Charge.

S&F factory made concealed sheet steel distribution boards, double door, SPN, 12 way, 230 volts AC, IP 43 with suitable busbar, neutral link, earth link suitable for MCB, DP/SPN as incomer & MCB SP as outgoing complete all as specified and directed.

S&F of MCB SPN 32 Amps, 240 Volts, 10 KA, `B' curve, all as per site requirement complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate 600x600x6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate n.less than 1.5 m below normal ground level, connected to galvanized iron wire 4 mm as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints as shown in drgs and including excavation and earth work, GI pipe light grade 25mm bore of protection of GI wire from earth electrode, supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 Chamber and MS angle iron frame 40x40x3mm and RCC cover 40 mm thick (1:2:4) type B-1using 20 mm graded stone aggregate Reinforced with 6 mm dia round bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , 20 mm dia GI Pipe light grade for watering complete all as specified and directed by Engr-in-Charge.