Military Engineer Services Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Costs
EMD
₹ 85,340Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Provn Of Certain Em And Misc Works At Hq Wac
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_649350_1Bid Award Id
ViewTender No
GE/SP/ TOKEN-82/2023-24Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
All as per item No-2 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.
1
-
-
... More
All as per item No-2 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.
2
-
-
... More
All as per item No 2 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size all as specified and directed by Engineer-in-Charge.
2
-
-
... More
S&F switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
8
-
-
... More
S&F socket outlet flush type 5 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
3
-
-
... More
S&F switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
S&F socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply and fixing in replacement of factory fabricated sheet steel enclosure, phosphatised, power painted, single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 20 amp, 240 volts, 10KA complete all as specified and directed by engineer-in-charge.
15
-
-
... More
S&F MCB SP 5 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.
15
-
-
... More
Supply and fixing in replacement of LED ceiling light 36 Watt 2x2 recess LED, 6000 K luminare having glare free symmetrical illumination complete all as specified and directed by Engr-in-Charge.
30
-
-
... More
Supply and fixing wall mounted fan 200mm sweep complete all as specified and directed.
6
-
-
... More
S&F in repair PVC copper stranded conductor cable size 25 Sqmm multi stranded single core 1100 volt grade including copper thimble connecting from panel and motor complete all as specified and directed by Engineer-in-charge.
60
-
-
... More
S&F PVC copper stranded conductor cable size 16 Sqmm multi stranded single core 1100 volt grade including copper thimble connecting from panel and motor complete all as specified and directed by Engineer-in-charge.
30
-
-
... More
Supply and fixing PVC flat submersible cable of size 6 sqmm 3 core all as specified and directed .
30
-
-
... More
Supply and fix vertical type elctric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre,BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, hot & cold connection pipes etc. complete all as specified and as directed by Engineer-in-charge.
1
-
-
... More
S&F PVC flexible PVC connections 15mm size with PTMT nuts of length 450mm long complete all as specified and directed by Engr-In-Charge
2
-
-
... More
M&L for Submain wiring with under mentioned runs of single core PVC insulated but unsheathed FRLS cable of specified size of multi stranded copper conductors 1100 volts grade IS 694 marked drawn through and including suitable size of rigid non metallic PVC conduit medium grade ISI marked not less than 20 mm dia) complete with all accessories and fittings all laid/fixed concealed in walls/ceiling or concealed in wall and surface conduit on ceiling; and also including the specified size earth continuity conductor of similar type cable complete all as specified.(The under mentioned runs of s/c cable and specified runs of earth continuity conductors and relevant conduit with fittings & accessories shall be measured as one run. (a) 2 Run of 4.0sq mm and one run of 4.0 sq mm earth wire and one run of PVC conduit will be measured as one Run complete all as specified and as directed by Engineer-in-charge.
30
-
-
... More
M & L for 15mm bore medium grade GI tubing with all fittings and fixed complete to walls and ceilings or laid in floors including MS clamps/ raddling complete all as specified amd as directed by Engr-In-Charge.
6
-
-
... More
S & F angle stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm bore pipe with connected accessories complete all as specified and directed by Engr-In-Charge.
2
-
-
... More
S & F Plug type bib taps, cast iron, screwed for iron pipe and fixed for 15mm bore pipe with connected accessories complete all as specified and directed by Engr-In-Charge.
1
-
-
... More
Supply, installation, testing and Commissioning of Jockey pump horizontal end suction
centrifugal type Confirming to IS- 12469:1988 with CI casing , bronze impeller and stainless steel shaft mounted on heavy duty bearings suitable for automatic operation with nonover loading power characteristics for frequent start / stop operations for 440 V , 3 phase, 50 Hz 90 m
head 180 LPM discharge , 15 HP motor including heavy base frame complete all as specified and directed.
Note:- Heavy iron base frame with necessary fixing arrangments also included in the unit quoted rate of item.
1
-
-
... More
Supply and fixing of fully automatic star delta starter in sheet metal encloser with relay range 25-30 Amp with single phase protection feature for 15 HP motor rating 415V , 50Hz 3 phase complete all as specified and directed.
1
-
-
... More
Supplying, laying, jointing, welding & testing MS Pipe of size 80mm dia bore (Heavy duty class 'C'), as per IS 3589 (1981) thickness 5.4 mm laid in trenches/bore or laying on floors for connections to centrifugal pump sets for suction and to connected outgoing water main pipe line complete including welding works and taking down unserviceable complete all as specified and directed.
10
-
-
... More
All as per above item No 26.00 here-in-before but 100mm dia
15
-
-
... More
All as per above item No 26.00 here-in-before but 150mm dia
35
-
-
... More
Supply and fixing and testing of CI fittings flange and sockets / all socketed / all flanged type such as bend upto 150mm bore (any type radius and angle) tapers any type (straight, bend, increasing, descreasing or double socket etc), Tee piece single branch, 'Y' junction, double branch cross (all sockets or socket and spigot) collors, caps and plugs including dewatering complete all as specified and as directed by engr in charge.
150
-
-
... More
Supply and fixing sluice valve cast iron with iron spindle PN-1.6 and fly nut flanged both ends and drilled for jointing wheel head type conforming to IS 14846 including two flanged joints with nuts bolts and washers rubber insertion packing etc for 150mm bore pipe and ISI marked complete all as specified and as directed.
1
-
-
... More
All as per above item No 30.00 here-in-before but 100mm bore
1
-
-
... More
Supply, Installation, Testing and Commissioning of 150 mm dia, single phase, Motor Actuated Butterfly Valve with disc material of SS-304 & stem material of SS-410, with EPDM seat & nylon coating, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition and valve position indicator.The mounting shall be direct on valve type and provided with top cover for actuator made out of CRCA sheet.
Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm.
In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz
Inbuilt 4 USB 2 ports
In built Base Ethernet Port
In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy
The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed.
2
-
-
... More
Supply, Installation, Testing and Commissioning of 80 mm dia, single phase, Motor Actuated Butterfly Valve with disc material of SS-304 & stem material of SS-410, with EPDM seat & nylon coating, hand wheel for manual operation and having 05 nos. limit switches for Open / Close condition and valve position indicator.The mounting shall be direct on valve type and provided with top cover for actuator made out of CRCA sheet.
Input Voltage: 230 V, A.C. Designed line pressure: 16 kg/sq cm.
In built CPU:- Quad-core 64-bit ARM Cortex A53 clocked at 1.2 GHz
Inbuilt 4 USB 2 ports
In built Base Ethernet Port
In built Micro SD port for loading your operating system and storing data In built wireless LAN and Bluetooth Low Energy
The mounting shall be direct type using specialized arrangement of GI pipe of suitable size/thickness, complete all as specified and directed.
1
-
-
... More
Supply and fixing cast iron non return valve flanged end conforming to IS 5312 of size 100mm dia complete with rubber flange, MS nuts & bolts complete all as specified and as directed by Engineer-in-charge.
1
-
-
... More
All as per above item No 34.00 in repair here-in-before but 150mm dia all as specified and as directed by Engineer-in-charge.
5
-
-
... More
All as per above item No 34.00 here-in-before but 80mm dia all as specified and as directed by Engineer-in-charge.
1
-
-
... More
M & L for cutting MS pipe of size 100mm to 150mm and welding of flanged on both sides/single side of MS pipe as required on site for connecting the MS pipe/Valve /NRV complete all as specified and directed.
Note:- (i) The unit quoted rate included the rate of flanges, cutting,welding work nut,bolts and rubber packing required at site . (ii) MS pipe ,valve and NRV will be paid separately under relevant item of the schedule 'A'.
10
-
-
... More
Taking down cast iron water mains of 150mm bore including all fittings with spigot and socket end and lead joints including burning out joints and recovering lead complete all as specified and as directed by Engineer-in-charge
20
-
-
... More
M&L for Cutting to cast iron pipes of 150mm bore before laying in position for insertion of new tees, branches, bend and new connection etc complete all as specified and directed by Engineer-in-charge
4
-
-
... More
Supply and laying cast iron pipes of 150mm bore with spigot and socket ends centrifugally cast class LA in any length laid in trenches complete all as specified and as directed by Engineer-in-charge .
60
-
-
... More
Supply and fixing single headed Stainless Steel fire hydrant landing valve type A (single head outlet) of 80mm dia landing valve with 63mm dia female outlet complete and 80mm inlet with rubber blank cap and chain as per IS 5290-1983, sutable for brigade hose of 63mm with couplings conforming to IS 903 including taking down the existing one complete all as specified and directed.
15
-
-
... More
Supply and fixing of weather proof standard fire hose box made of 122 SWG gauge MS sheet 1200mmx 1200 mmx600mm with single door and 4mm thick glasses and door frame including locking arrangement , and fixing arrangment for water delivery hose real drum and single headed valve and box with enamelled fire red finish including taking down the existing one complete all as specified and directed.
6
-
-
... More
Supply and fixing in position 63mm nominal bore and 15m long synthetic fibre circular woven jacketed rubberized fabric reinforced rubber lined (RRL) fire hose pipe of approved make bearing IS 636-1988 type A mark and heavy duty delivery hose coupling (conforming to IS ; 903) bound and riveted to the hose pipe with copper fivets and copper wire complete all as specified and including taking down the existing one complete all as specified and directed.
12
-
-
... More
Supply and fixing position Stainless steel 63mm dia short size branch pipes with 15mm dia nozzles with 63mm instantaneous coupling ISI marked (IS; 903) complete all as specified and directed
6
-
-
... More
Supply & fixing hose real drum with water delivery thermoplastic rubber line (first aid hose) as per IS 12585 20mm dia 15 mtr length to with stand 10 Kg per sq cm working pressure fitted with gunmetal nozzle and shut off valve of any size complete all as specified and directed
6
-
-
... More
Supply and fixing in replacement of unserviceable gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe 20mm dia complete all as specified and as directed by Engineer-in-charge.
6
-
-
... More
Taking out existing GI pipe 20mm dia from the fire hose cabinet including all fittings complete all as specified and as directed by Engineer-in-charge
18
-
-
... More
Supply and fixing GI tubing medium grade 20mm dia with all fittings complete in fire hose cabinet incl necessary suitable size of clamps complete all as specified and as directed by Engineer-in-charge.
18
-
-
... More
M & L for run lead joint suitable for spigot & socket CI/GI pipe 150 mm dia complete all as specified and as directed by Engineer-in-charge
15
-
-
... More
Supply and fixing and testing of MS Pipe bend of size 150mm dia bore (Heavy duty class 'C'), as per IS 3589 (1981) thickness 5.4 mm complete all as specified and directed by engr in charge.
2
-
-
... More
All as per above item No 50.00 here-in-before but 100mm bore
1
-
-
... More
S&F pressure gauge analong type 4" dia 0-10 Kg/cm (0-150 PSI) rating complete all as specified and as directed by Engineer-in-Charge.
1
-
-
... More
Excavation in trenches in any type soil /rock (soft/loose/hard/dense soil/rock) n.exe 1.5 mtr wide and n.exe 1.5 mtr in depth for laying of pipe etc and n.exe 1.5 mtr in depth and getting out complete all as specified and as directed by Engineer-in-charge. NOTE : while removing the pipe line, Contractor shall refixed the old tiles as per existing . The quoted rates including for all the materials / t&p / machinery used in this item no material can paid / measured seperately
10
-
-
... More
Returning filling in including spreading levelling watering and well ramming hard / dense soil in layers not.exe 25cm each layers complete all as specified and as directed by Engineer-in-charge
8
-
-
... More
Removal of excavated material & surplus spoil to a distance n.exe 50 mtr and depositing where directed at a level not exe 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-charge
2
-
-
... More
1. Supplying, installation, testing & commissioning of Retrofit Emission Control Device (RECD) in existing Diesel Generator Set of capacity 30 KVA of any make, model and vintage by making necessary modification, welding of suitable size angle and pipe for support structure and suitable size ladder including cutting of old silencer/muffler without damaging diesel generator set to reduce guaranteed specification particulate matter (PM 2.5) Carbon Monoxide, Hydrocarbon reduction efficiency : Minimum 70% for all DG Sets, emission tested as per D2, 5 -mode test cycle as specified in ISO-8178-Part 4 complete all as specified and as directed by Engineer-in-Charge with following Specification:-
(a) Technology : wet scrubber, Electrosatic Precipitator (ESP), and Catalytic conversion. The output result of Retrofit Emission Control Device (RECD) should be as per CPCB II norms.
(b) Electric Supply : 220 Volts AC
(c) Bypass System should be available. (d) The Retrofit Emission Control Device (RECD) should be closely coupled with the DG exhaust to ensure 100% of the exhaust passes through the Retrofit Emission Control Device (RECD).
(e) Anti-Vibration mountings shall be provided for complete Emission Control retrofit device in case of flexible coupling with the diesel generator exhaust.
(f )Emission Control retrofit device should have protection against under voltage, over voltage, under frequency, over frequency, low battery voltage, over current, earth-fault, short circuit, phase sequence change etc. (g) 02 year warranty including manufacturing defects on sensors, back pressure and leakage. (h) RECD shall be have no effect on exhaust back pressure. The back pressure shall be maintained within prescribed limit by the manufacture. Necessary precaution to be taken in Exhaust scheme design to avoid condensate/steam back entry to DG sets which is/are not in operation.
(j) The Retrofit emission control device shall be with corrosion resistive and heat resistance paint.
(Note : Retrofit Emission Control Device (RECD) shall comply all norms as per CPCB.
1
-
-
... More
All as per Item No 56.00 above but RECD for existing 125 KVA Capacity Diesel Generator set of any make/Vintage
2
-
-
... More
2. All as per Item No 56.00 above but RECD for existing 160 KVA Capacity Diesel Generator set of any Notes for Item No 56.00 to 58.00: (a) Test report and Type approval certificate of the Retrofit Emission Control Device will be from one of the follwoing CPCB recognised / approved Laboratories shall be produced before installtion:-
(i) Automotive Research Association of India, Pune (Maharashtra).
(ii) International Centre for Automotive Technology, Manesar (Haryana)
(iii) Indian OiL Corporation, Research and Development Centra, Faridabad (Haryana)
(iv) Indian Institute of Petroleum, Dehradun (Uttarakhand)
(v) Vehicle Research Developement Establishment, Ahmednagar (Maharastra)
(b) Number of preventive maintenance visits in a year during warranty period 2 visit.
(c) The contractor shall provide the trail run (testing) of Retrofit Emission Control Device (RECD). The trial run shall be for two hours/ The electrical loading shall not be more than the rated capacity of the DG Set.
(d) Any other activity, exhaust piping of suitable size, civil work, copper wire etc required at site to make the Retrofit Emission Control Device (RECD) fitment will be provided by the contractor without any extra cost & no additional payment will be made on this account.
2
-
-
... More
M&L for excavating in post holes (or similar holes) in hard/dense soil each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.
6
-
-
... More
M&L for cement concrete type B2 1:2:4 (40mm graded stone aggregate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed.
0.9
-
-
... More
S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe410 (Gde E-250 quality-A) complete all as specified and directed.
142.8
-
-
... More
S&F mild steel plate girder or single stanchions conforming to Fe410 (Gde E-250 quality-A), built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections complete all as specified and directed.
10
-
-
... More
S&F 11 to 15mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 5cm but n exc 10cm long complete all as specified and directed by Engr-in-charge.
3.6
-
-
... More
S&F Fe-410-W (Gde E-250) quality-A plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment complete all as specified and directed.
22.61
-
-
... More
S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240
105.12
-
-
... More
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour (decided by EIC) having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
24
-
-
... More
M&L for two coats of synthetic enamel paint over one coat of red oxide, zinc chrome primer including preparation of new surface of any description, over 10cm in width or girth, not otherwise described complete all as specified and directed.
25
-
-
... More
M&L for 75 mm thick PCC type D-2, 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and directed.
145
-
-
... More
M&L for Sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.
7.25
-
-
... More
M&L for 60mm thick, M-30 Grade Machine pressed precast concrete pre-painted interlocking paver block any shape and size casted in plastic moulds and competed on vibratory table confirming to IS 15658-2006 with grey cement and pigment complete all as specified and directed by Engr-in-charge.
145
-
-
... More
M&L for Providing, cement concrete in roof/side kerbs or mud stops, rounded or chamfered on edges making good disturbed surface of ground complete all as specified and directed.
1.31
-
-
... More
M & L for complete removal of existing roof treatment (Mud puska, Cement Tiles or Old APP Roof treatment) including bedding layer in cement mortar/Mud and disposed from MoD land complete all as specified and directed by Engineer-in-charge.
48
-
-
... More
M&L PCC 1:2:4 type B1 using 20mm graded aggregate mixed with 3.00% liquid water proofing compound of weight of cement laid 25 mm thickness as in padding over roof slabs for providing proper slope to the concrete padding, surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-charge. Note: WPC will be measured & paid seperately.
1.2
-
-
... More
Supply only integral water proofing compound complete all as specified and as directed.
11.11
-
-
... More
M&L for five layer prefabricated atactic polypropylene polymer (APP) modified 3 mm thick membrane ( weight not less 3 kg/sqm) reinforced with 160 gms polestar non-woven fabric with scratched tool before finishing roof surface. When the concrete surface is still green, 10 mm thick 1:4 cement plaster shall be laid, the roof surface shall be thoroughly wire brushed washed dried up and cleaned of all foreign matter and dust prior to the application of primer on the dried surface, one coat of approved bituminous primer having density in the range of 0.87 to 0.89 / kg at 25 degree and viscosity of 70 to 160 CPS manufactured by the same manufacturer @ 0.40 litres/sqm shall be applied. APP membrane shall be laid on primed surface torch application method after allowing 24 hours of primer to dry. Laying of APP membrane shall be commenced at the lowest level and worked upto the crest. APP membrane will normally be laid in length at right angle to the direction of slope. The overlaps shall be of minimum 100 mm on longitudinal direction and 150mm on the transverse direction. All overlaps shall be bonded with bitumen primer and levelled by the heating the overlaps with butane torch. This treatment shall be done by the approved authorized applicator. Guarantee of treatment shall be for 10 years. Thereafter APP membrane shall be painting with two coat of water proofing paint with aluminium finish.
(ii) Independent testing of membrane for the approval technical parameters specified hereinafter shall be carried out the approved laboratories like National test house any other Govt approved laboratory having facilities for the testing of membrane.
48
-
-
... More
M&L for 2 coat of water proof aluminium paint incl preparation of newly or previously untreated surfaces of any description, over 10cm width or girth, not otherwise described complete all as specified and directed by Engineer-in-charge
48
-
-
... More
S&F in repair 110 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc including removing from site complete all as specified and directed by Engineer-in-Charge.
24
-
-
... More
S&F 110mm bore pipe PVC (SWR) bends any radius with oval access door complete all as specified and directed by Engineer-in-Charge
6
-
-
... More
Dismantling loose concrete cover of RCC columns, beams, slabs chajjas and the like as directed, roughening and cleaning concrete surface with steel wire brushes, washed with water and allowed to dry, incl derusting of steel reinforcement, providing fabric mild steel wire mesh 75 mm x 75 mm x 2 mm dia as reinforcement to concrete. After placing the additional reinforcement all concrete surfaces shall thoroughly scrubbed with brushes, washed with water and alloy to dry . To this surfaces apply chemical polycrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness ) gunniting mix (using 1 part of ordinary Portland cement 53 Grade and 2 parts of ghaggar sand mixed with adhesive / admixture at the rate as directed) with a pressure of 2 to 2.5 Kg per Sq cm by gunniting machine and surfaces finished even and fair, incl necessary padding, shuttering / form work . Including 5 mm thick cement plaster in CM (1: 4 ) complete all as specified and directed by Engineer - in -charge. Note:- (a) The rate is inclusive for scaffolding or reqd necessary arrangement for multi-storey bldg external gunniting.
54
-
-
... More
Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. Raking out joints ,hacking for key and scrubbing down with water including removing debris out site MOD land complete all as specified and as directed by Engr-in-Charge.
500
-
-
... More
M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished surfaces even and smooth without using extra cement complete all as specified and as directed by Engr-in-Charge.
500
-
-
... More
M&L for complete removal of existing treatment from external surfaces of walls by brushes and washing down and stopping of surface and levelling / edging the disturbed portion plane/edges using necessary filling compound of putty to obtain smooth/regular/even finish surface with using of sand paper etc and prepare surface , applying two coats of exterior weather proof (coat) paint on plastered/concrete surfaces of walls, paths , etc., over a coat of cement base paint primer complete all as specified and as directed by the Engineer-in-Charge.
500
-
-
... More
Demolition of concrete of any description and in any position not otherwise specifically provided for. Complete all as specified and directed by Engr-In-Charge.
1.5
-
-
... More
M & L for 75mm thick PCC 1:3:6 type C-2 (40mm graded stone aggregate) as in plinth protection complete as directed by Engr-in-Charge.
20
-
-
... More
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid,bedded and pointed in any mortar complete all as specified and directed by Engr-In-Charge.
3.3
-
-
... More
M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete including 20 mm screed bed in cement mortar 1:6 complete all as specified and directed.
33
-
-
... More
Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-In-Charge.
25
-
-
... More
M&L for glazed ceramic coloured tiles of size 350 x 250 x 7mm/450 x 350 x 7mm thick over and including 10 mm thick rendering in cement mortar 1:4 as in backing coat for tiles on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
25
-
-
... More
Dismantling water tank and removing to store exceeding 500 but n.exc 1000 ltrs complete all as specified and directed.
1
-
-
... More
S&F for rotational moulded polyethylene water storage tanks triple layers of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position including 20mm dia HD polythene float (ball) and epoxy coated aluminium rod (fly nut) screwed for iron pipe or brass ferrule complete all as specified and directed.
1
-
-
... More
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) exc 1.5 Sqm but n exc 4 Sqm each,incl removing complete and making good after fixing of new chowkat to match existing finish all as specified and directed by Engr-In-Charge.
2
-
-
... More
Taking down chowkats or frames with shutters (with out taking off shutters from the frames) not exc 1.5 Sqm each , incl removing. making good after fixing of new chowkat to match existing finish complete all as specified and directed by Engr-In-Charge.
2
-
-
... More
S &F Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, Thickness of laths in 1.25mm complete all as specified and directed.
8
-
-
... More
S &F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.
4
-
-
... More
S&F powder coated (coloured as directed by GE), tata steel hinged double shutter emergency fire exit door, fire resistance shall be 120min, Door Frame are made with 1.6mm thick galvanized steel sheet pressed to single rebate profile of size 125 x 60mm. Door Shutter are made with 1.25mm thick galvanized steel sheet pressed formed to provide a 46mm thick fully flush double skin panel shall with lock seam joint at style edges,for the opening 1.8mX2.0m (+-10%), complete all as specified and directed by Engr-In-Charge. Note :- Rate includes all fitting and fixture as recommended by manufacturer.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements