Military Engineer Services Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Costs
EMD
₹ 98,660Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Ge/c-39/2024-25 Provn Of Certain Sanction Work In The Area Of Age B/r-i And Age E/m Under Ge (central) Delhi Cantt-10
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_669275_1Bid Award Id
ViewTender No
GE/C-39/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
M & L for Granite (of any type) 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement to match the shade of granite stone including grinding, nosing and polishing including 20 mm thick screed bed in CM 1:6 complete all as specified.
11
-
-
M & L for Taking down cement plaster in brick walls,including raking out joints,hacking for key,scrubbing down with water etc including scaffolding if required complete all as specified.
1216.4
-
-
M&L Rendering 10 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified.
500
-
-
M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces , applied in two layers i.e.. Ist layer of 10 mm thick rendering in cement mortar (1:4) and 2nd ( top ) layer of 5 mm thick rendering in cement mortar (1:4 ) mixed with WPC finished even and fair etc complete all as specified and directed.
(Note:- WPC shall be measured and paid separately.)
566.4
-
-
M&L for rendering 5 mm thick in CM 1 : 3 on brick or concrete surfaces (in ceiling) etc finished fair and smooth complete all as specified.
170
-
-
M & L for applying white wash three coats on newly plastered surfaces of ceiling including preparation of new surfaces for matching with repaired surfaces complete all as specified and directed.
170
-
-
M&L preparing old decorated surfaces of ceiling and applying two coats of white wash complete all as specified and directed by Engineer-in-charge.
250
-
-
Taking down chowkhat or frame with shutters (without taking off shutters from the frame exc 1.5 sqm but nexc 4 sqm each all as spd.
23
-
-
Taking down chowkhat or frame with shutters (without taking off shutters from the frame n exc 1.5 sqm each all as spd.
16
-
-
M & L aluminium alloy windows series -B (18 mm ) 3 track ,1.5 mm section of jindal or equivalent in other approved makes with half opening guage shutter on one track and two glazed shutter half opening each on two track including handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including provision of 4.0 mm thick tinted glass /frosted glass of superior quality and stainless steel wiremesh Complete all as specified and directed by Engineer-in-Charge.
53.2
-
-
S & F for anodised aluminium ornamented grills (Pattern Approved by GE) Complete all as specified and directed by Engineer-in-Charge.
183.54
-
-
S & F Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified.
2.9
-
-
S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm Complete all as specified and directed by Engineer-in-Charge.
36.4
-
-
S & F as pressed steel frames (125x60) mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of primer complete all as specified and directed by Engr -in- Charge.
99
-
-
S & F as pressed steel frames (105x60) mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., including one shop coat of primer complete all as specified and directed by Engr -in- Charge.
110.4
-
-
S&F 35 mm thick 2nd class hardwood glazed and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters as specified in SSRpart-i section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.
46
-
-
M & L for 35 mm thick factory made 2nd class hardwood plain, framed, panelled shutters (two panels), with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. the size of rail and stile as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated.
56.61
-
-
Supply and fix 300 mm long mild steel sliding door bolt, bolt type stove enameled black with bright bolt not less than 12 mm dia with an including a minimum of six bolts and nuts (four on bolt plate and two on staple plate) complete all as specified and directed.
36
-
-
S & F 150 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified.
97
-
-
S & F extruded aluminum alloy handles fabricated type and anodised of size 150mm, complete all as specified.
134
-
-
S & F butt hinges medium weight stainless steel 100mm size complete all as specified.
243
-
-
S & F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
28
-
-
S&F in repair 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar Complete all as specified and directed by Engineer-in-Charge.
16
-
-
S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/
cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).
Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
75.2
-
-
S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge.
(Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.
22.4
-
-
S & F 100 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified.
32
-
-
S & F 100 mm aluminium handles, cast type anodised complete all as specified.
32
-
-
M&L for two coats of synthetic enamel paint over a coat of pink primer on new painted wood or wood based surfaces not otherwise described over 10 cm width or girth incl preparation complete all as spd.
205.1
-
-
M&L for Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified.
73
-
-
Material and labour for rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description.
8
-
-
Taking up or down 15 mm dia steel tubing and connection incl cleaning or removal to store all as specified.
120
-
-
Taking up or down 20mm dia steel tubing and connection incl cleaning or removal to store all as specified.
60
-
-
M & L for 15mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified .
120
-
-
M & L for 20mm bore galvanised steel water tubing medium grade with all fittings (ISI Marked) and fixed complete to walls and or laid under floors etc complete all as specified.
60
-
-
S&F in repairs 15 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed Complete all as specified and directed by Engineer-in-Charge.
8
-
-
S&F for 20 mm bore gate valve,cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed Complete all as specified and directed by Engineer-in-Charge.
8
-
-
Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.
8.51
-
-
Material and labour for cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in plinth protection 75 mm thick laid in bays and surfaces finished even and smooth without using extra cement complete all as specified and directed.
94.5
-
-
M & L in repairs PVC connection 15mm dia of standard pattern 450mm long, with two Nos brass check nuts (adopts) and washers etc Complete all as specified and directed by Engineer-in-Charge.
40
-
-
S&F for stainless steel plate rack of size 60x60x25 cm depth size made out of 0.80mm thick sheet complerte all as specified and directed by Engineer-in-Charge.
8
-
-
S&F in repair stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste pipe, waste cuppling incl fixing cast iron cantilever bracket connecting union over all size 915x460mm with bowl size410x330x160mm complerte all as specified and directed by Engineer-in-Charge.
9
-
-
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm Complete all as specified and directed by Engineer-in-Charge.
8
-
-
M&L in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers and firxed to wall after taking down old mirror Complete all as specified and directed by Engineer-in-Charge.
8
-
-
S & F in repairs towel rail 600mm long brass chromium plated of 20mm dia (external) and 1mm thickness with gutties embeded in cement mortar 1:3 with MS screws etc Complete all as specified and directed by Engineer-in-Charge.
8
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for, Complete all as specified and directed by Engineer-in-Charge.
4
-
-
M & L for framed work as in doors, sun shade or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410W-Gde-250 quality A Complete all as specified and directed by Engineer-in-Charge.
410
-
-
S&F in repair 20 mm Dia stainless steel tube for curtain rod including pair of suitable S.S brackets approved by GE including taking down old pelmet boxes with curtain rods complete all as specified and directed.
151.5
-
-
Supply and fix welded steel wire fabric(MS Jali) fixed to steel members weight n. exc. 4 kg/sqm incl welding complete all as specified and directed.
250
-
-
S&F in repairs fancy type CP brass shower rose with flat panel 125 mm size suitable for 15mm bore pipe complete all as specified and directed .
8
-
-
S & F in repair fancy type brass CP angle valve 15 mm dia complete all as specified.
40
-
-
S&F in repair fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore complete all as specified.
32
-
-
M & L for cement concrete 1:3:6 type C0 using 12.5 mm graded stone aggregates as in roof kerbs, or mud stops, rounded or chamfered on edges, coping Complete all as specified and directed by Engineer-in-Charge.
1
-
-
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth.
120
-
-
M & L for 25 mm sand filling under floors or in foundation including watering and consolidation.
4.21
-
-
Material and labour for machine pressed precast PU coated concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment laid over 50mm thick compacted sand cushion complete all as specified and directed. (Note : - Sand cushion will be measured and paid separately).
130
-
-
M & L for 75 mm thick cement concrete type D- 2, 1:4:8 (40mm graded aggregate) complete all as specified and directed by Engineer-in-charge.
100
-
-
Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles.
7
-
-
M & L for brickwork with subclass- ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6.
7
-
-
Dismantling boarding, any description, fixed in any position with nails Complete all as specified and directed by Engineer-in-Charge.
79.6
-
-
Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick including frame confirming to IS:14587 complete to all as spd.
79.6
-
-
S&F of Stainless steel auto closing hinges openable at degree for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed.
64
-
-
Supply only of stainless steel handles 100 mm size for kitchen cabinet shutters and bed room cub boards complete all as per specified and directed.
64
-
-
S&F brass chromium plated tubular hanger rod 20 mm dia with suitable brackets complete all as specified and directed.
16
-
-
S&F for PVC magnetic door catches of kitchen cabinet and similar work fixed with MS screws.
64
-
-
S&F 1.6 mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.
2
-
-
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) Complete all as specified and directed by Engineer-in-Charge.
99.6
-
-
S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors.
69.6
-
-
S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete.
30
-
-
S & F PVC bends 110 mm size diminishing pieces or tapers (larger bore measured) with oval access door all as specified.
5
-
-
S & F PVC bends 75 mm size diminishing pieces or tapers (larger bore measured) with oval access door all as specified.
5
-
-
S&F for 75 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
32
-
-
Dismantling loose concrete cover of RCC columns,beams,slads chajjas and the like as directed roughening and cleaning concrete surfaces with steel wire brushes washed with water and allowed to dry including de rusting of steel reinforcement to providing fabric mild steel wire mesh 75X75X3 mm dia as reinforcement to concrete surfaces applying adhesive admixture over steel mesh and providing minimium 40 mm thick (average thickness) guiniting mix using 1 part of ordinary portland cement 53 grade and 2 part of ghaggar sand mixed with the pressure of 2 to 2.5 kg per sqm by guinting machine and surfaces finised even and fair all as specified.
60
-
-
Supply and fix in repairs vitreous china wash hand basin (flat back) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size and waste pipe & waste fittings complete all as specified.
8
-
-
S & F in repairs floor mounted EWC incl all necessary fittings and making good the disturbed surface to match with the existing complete all as specified and directed by Engr -in-charge. Note:- Cistern and seat cover paid seperatly.
8
-
-
Supply plastic water closet seat cover white closed pattern with flat bottom end cover and mild steel chromium plated hanging device complete all as specified.
8
-
-
Supply only in repairs PVC Low level flushing cistern 10 ltr capacity incl internal fittings,sypons,handle,bend etc incl 2 Nos CI brackets complete all as specified.
8
-
-
S&F in repairs chromium plated brass central hole WHB mixer 15 mm bore chromium plated, fancy type including joints to hot and cold Complete all as specified and directed by Engineer-in-Charge.
8
-
-
S&F in repair brass chromium plated mode 3 in 1 wall mixture model Quarter half turn (SOLO)of as all specifed and as directed. Code SOL-6281.
8
-
-
S & F in repair Glass Corner Shelf 6mm thick including CP railing radius 250mm complerte all as specified and directed by Engineer-in-Charge.
8
-
-
S&F in repairs Glass shelf assembly 5.5mm thick, 600mm long 120mm wide with cp railing complerte all as specified and directed by Engineer-in-Charge.
8
-
-
M&L for following:-
(a) Dismantling of floor of WC with Indian type Water closet and removing out the cinder/concrete from sunken protion, cleaning of RCC surface to remove dust, loose particle with compressed air or any other suitable method depending on site conditons, grinding any sharp edges etc complete all as specified and directed. (i) Cleaning or RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc.
(ii) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of polymer modified cementitious liquid/waterproofing coating @ 1.50 Kg/Sqm glass fibre reinforcement and top coat with polymer modified cementitious liquid/waterproofing coating @ 1.50 Kg/Sqm.
(iii) M&L for providing 25mm dia GI pipe spout projecting at least 150mm beyond outer face of wall.
(iv) The area of Each WC/ bathroom portion is n.exc 2.00 Sqm
(v) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account.
Note : The work will be executed by authorised applicator.
4
-
-
M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound complete all as specified and directed.
7
-
-
M&L for sunken portion filled with 40mm graded brick bats or surkhi all as specified and directed.
2
-
-
M&L for cement concrete 40 mm thick PCC 1:2:4 type B1 (using 20mm graded aggregate) and finishing even and fair on sunken floor all as specified and directed.
4.8
-
-
Demolition Bricks (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons, etc. (each layer all as specified and directed.
320
-
-
Demolition Mud in roofs, any thickness, including plastering and lapping (whether full thickness removed or only a part thereof) all as specified and directed.
20
-
-
Removing soil excavated material exc. 1.5Km but n exc 5km and depositing where directed at above the starting point all as specified and directed.
20
-
-
M&L for cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) on roof padding surface finished even and smooth without using extra cement complete all as spd & directed.
16
-
-
M&L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) capable of applying 15mm average thickness in single layer and finishing with trowel with a bond coat: SBR polymer (@ 10% of cement weight) modified cementious bond coat @ 2.2 kg cement/Sqm of surface area mixed with specified portion of AP SMARTCARE or equivalent Repair Polymer complete all as specified land as directed.
320
-
-
M&L providing and applying Smartcare Dampproof, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajas in multiple coats @2.0 litre/sqm. Primary [coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with 40 GSM geotextile, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes complete in all respect as per the direction of Engineer-in-Charge.
320
-
-
Supply only integral water proofing compound (ISI marked).
20
-
-
Demolition of reinforced cement concrete in any position all as specified and as directed by Engineer -in-Charge.
0.9
-
-
M&L for Reinforced cement concrete 1:2:4 Type B-1 (20 mm graded agg) in shelves & similar items complete all as specified and as directed by Engineer-in-Charge.
0.9
-
-
M & L for formwork to soffits of suspended slabs such as roof slabs, floors slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) for rough finished surface all as specified.
10
-
-
M&L for mild steel TMT bars 10mm dia and over cut to length,bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
110
-
-
Material and labour for machine cut Kota stone slab of size 550x5500mm and 20 to 25 mm thick as in flooring, laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing, laid over and including cement screed bed 20mm thick in cement mortar 1:6, including rubbing and mirror polishing including pattern work with 150mm wide white marble strips complete all as specified and directed.
15
-
-
All as per item No 99 above above but laid/fixed over in vertical surface over and incl and provision of 10 mm thick cement plaster in CM (1:4) back coat Complete all as specified and directed by Engineer-in-Charge.
9
-
-
M & L for non skid ceramic coloured tiles of 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 sqm but nexc 0.18 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white/coloured cement to match with the shade of tiles and including cement screeding 15mm thick in cement mortar 1:6 complete all as specified and as directed.
90
-
-
M & L for Glazed ceramic coloured tiles 600x 300 x 9 to 10mm thick in dado, set and jointed in neat cement slurry and pointed in colour cement to match including rendering 10mm thick in cement mortar 1:4 complete all as specified and as directed.
256
-
-
M&L for newly plastered surface of wall, Applying with Graco-490 spray machine, of GreenPro certified water-based, modified acrylic, exterior Apex Suprema Emulsion or equivalent as per required shade (Company depot tinted) with silicon additives, heat reflectant property, VOC less than 2% by mass, Class A IS-15489 and IS-101 @5-6sqm/ltr over a coat of Trucare exterior wall primer or equivalent to be done @1ltr/10sqm with spray Graco-490 spray machine after cleaning and removing dirt dust , thoroughly brushing the surface to obtain an even surface with touch-up putty including all material labour, necessary tools and machinery to give an even shade. Application to be done only by applicator authorised by manufacturer, also shall be approved by GE before starting of work. Manufacture should have at-least two manufacturing units within 100km radius to ensure uninterrupted supply. Note: Ten percent amount will be retained for 5 years on account of guraranttee.
493
-
-
M & L for two coat of distemper oil emulsion over a coat of primer and 2-3 mm thick JK Birla wall care putty including preparation of new plastered surface of wall complete all as specified and directed.
500
-
-
M&L for complete removal of existing treatment of wall and applying average 3mm thick wall Putty or equivalent two or more coats to get even and smooth surface and making the wall surface / Corners even and smooth and applying two coats of Acrylic Distemper with Graco 490 spray machine over a coat a primer complete all as specified and directed.
740
-
-
Excavation in trenches (soft/loose soil) n exc. 1.5m wide and n exc 1.5 m in depth for foundation etc. and getting out all as specified.
2.4
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
0.32
-
-
M & L for removing excavated material exc. 250m but not exceeding 500m and depositing where directed all as specified.
2.08
-
-
M & L for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 all as specified.
0.74
-
-
Supply and laying DWCPE (SN8) 200mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in trenches to a level on cocrete bed complete all as specified and directed by Engineer-in-charge.
20
-
-
M&L for providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation and mass concrete complete all as specified.
1.35
-
-
Material and labour for medium duty perforated precast machine pressed drain cover slab 80 mm thick of PCC 1:1.5:3 type B-1 and 10mm TMT bars ,including flat iron 150mmx6mm all around the slab and 40mm dia hole at 100mm C/C , size of slab as required at site and complete all as specified and directed.
4
-
-
Excavating in post holes each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceedings 25cm watering and removing surplus soil to distance n exc 50 m and making good surfac in soft/loose soils.
18
-
-
S&F steel work as in posts and struts , flats in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
150
-
-
Dismantling and Re-Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standereds, rails, straining blots, etc. incl provn of binding wire.
53.82
-
-
Supply only chain link MS galvanised fencing any size or any type complete.
30
-
-
S&F pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.
69
-
-
S&F Mild steel rolled section or hollow pipes( square or round pipe) as in main and cross beam, hip and jack rafter, purlins, where connected to common rafter and running rails fixed with cleat or other connecting plates etc. complete all as specifed and directed.
100
-
-
S&F 2mm thick fibre glass reinforced translucent plain sheeting with side lap fixed with srew.
91.62
-
-
Taking down shutters of any desciption area exc 1.0 Sqm but n.exc 2.0 Sqm each and removing to or from store.
1
-
-
S & F 30 mm thick flush shutter solid core construction, with block board core and plywood face panels,commercials type on both sides complete all as specified.
4
-
-
S&F solid PVC door frame of sixe 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube in opening as per specification and drawing.
10
-
-
S&F factory made soilid panel PVC Door shutter 30mm thick (Stype) both side clouor consisting of frame made out MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having PVC sheet stripof 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail, & bottom rail; Panneling of both side prelam clouor PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing.
4
-
-
S&F steel windows with side hung shutters incl box type hing, steel handle and peg stay complete with glazing bar.
2.9
-
-
All as pe Item No 124 above but without glazing bars.
2.9
-
-
S&F 4mm thick sheet glass and glazing in square or rectangular shape n .exc. 0.5sqm in each pane, complete all as specified.
2.5
-
-
M&L two coats of synthetic enamel painting on wooden surfaces not otherwise described over 10cm width or girth over a coat of pink primer inclding prepration of newly untreates surfaces complete all as specified and directed.
12
-
-
S&F 250mm aluminium alloy anodised sliding bolts with hasp, staple and fixing clips of sheet, cast or extruded section fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
3
-
-
Supply only butt hinges, 100mm medium weight, cold rolled mild steel.
6
-
-
M&L 25mm thick cement concrete type B-O, 1:2:4 (12.5mm graded agg ) as in sub flooring.
30
-
-
M&L three coats white wash on wall undecorated surfaces including prepration of newly plastere surfaces.
60
-
-
Material and labour for preparation of new plastered surfaces as of walls and applying Two coats of weather proofing exterior acrylic emulsion paint of over one coat of primer from the same manufacturer white lime wash complete all as specified and directed.
Note: The application shall be executed on any type of surface and on horizontal/Vertical areas.
Notes for item No 84, 92, 93 & 132: (a) The work shall be executed through authorised applicator of manufacturer only.
(b) Authrised Applicator shall be approved by GE before starting of work.
(c) All materials shall be procured directly form manufacturer. The purchase voucher shall be produced to the Engineer-in-Charge for his verification of material.
Engineer-in-Charge shall deface the original purchase vouchers.
(d) MOU with authorized applicator will be submitted by contractor within 7 days after opening of Financial Bid.
(d) A guarantee amount of 5% of contract of work done for item No 84, 92, 93 & 132 of BOQ will be retained for 5 years of the completion of work.
150
-
-
S&F in repairs viterous china squartting pan orrisa pattern , size 580x 440mm white, interged foot rest including connection to trap and to flush pipe, anti syphonic pipe etc complete making good to floor.
1
-
-
S&F PVC valve less syphonic action type low level flushing cistern white of capacity 10 Ltrs with inlet valve float and fixed to water closet with PVC flushing pipe 32mm dia .
1
-
-
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc
284
-
-
M&L for Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) includingdistance pieces, cleats etc.Fe 410-W (GdeE- 250) quality A all as specified and directed.
500
-
-
S & F Expanded metal n exc 4 kg weight per square meter, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members all as specified and directed.
400
-
-
Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out soft and loose soil
35
-
-
M&L for 100mm thick PCC (1:4:8) Ty D2 as in sub base .
35
-
-
M&L 50 mm thick PCC 1:2:4, type B-0 using 12.5mm graded crushed aggregates as in floor surface all as specified and directed.
35
-
-
Taking down old MCCB , TPN DBs , SPN DBs, sp mcb & main switch/ enclosure box of any make and type from the site and making good surface complete all as specified and directed.
8
-
-
Taking down old submain wiring of any size and make from the site and making good surface complete all as specified and directed.
220
-
-
Disconnecting elect connection and taking down of ceiling fan/ Exhaust fan of any make and any height, dismantling blade and removing fan alongwith blade for depositing in MES store yard complete all as specified and directed by Engr- in- Charge.
20
-
-
M&L point wiring complete with 1.5 Sqm single core PVC insulated unsheathed FRLS cable 1100 volts grade (ISI marked) with multi stranded copper conductor drawn through and including non-metallic rigid PVC medium grade conduit and conduit accessories (ISI) marked concealed in wall/fixed to roof, ceiling etc and incl provn of 1.5 sqmm PVC insulated multistranded unsheathed copper conductor cable FRLS (ISI marked) as earth continuity conductor, fabricated sunken terminal box made out of 1.60 mm thick sheet steel duly painted concealed in walls, with 3mm thick bakelite/PVC sheet ISI marked top cover with brass/chromium plated screws and cup washers for housing switches, socket outlets, fan regulators etc, all as specified and as directed.
-
-
-
One light /Ceiling fan/exhaust fan point controlled by one switch.
182
-
-
One 3 pin 5 Amps socket outlet point controlled by one No one way switch on independent board.
38
-
-
One 3 pin 5 Amps socket outlet point controlled by one No one way switch on same board
37
-
-
One bell point controlled by one bell push.
8
-
-
One light point controlled by two, two way switch .
4
-
-
All as per item No 144 above but point wiring with 4 Sqmm single core copper cable and earth continuity wire with 2.5 Sqmm single core stranded copper cable for one three pin 15/16 A socket outlet point on independent board complete all as specified and directed by Engineer in charge.
2
-
-
M&L point wiring with PVC unsheathed multi stranded copper conductor cable 2.5 sqmm FRLS 1100 Volts in New PVC concealed conduit medium grade ISI Marked not less than 20 mm dia in new M S steel terminal boxes modular including one run of using 1.5 sqmm FRLS 1100 Volts copper conductor cable as earth continuity connected to common earth for one 15 A switch socket power point, all as specified
28
-
-
M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 4 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 2.5 Sqmm size stranded conductor as earthwire.
140
-
-
Supply and fix in repair Sub main wiring complete with two runs of 6 Sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable with one run of 4 sqmm single core PVC insulated FRLS cable 1100 volts grade, multistranded copper conductor cable as earth continuity conductor, drawn through and including 20 mm dia non metallic rigid PVC conduit and conduit accessories(Concealed)/ Surface in walls all as specified and as directed.
100
-
-
M&L switch Modular type 6 Amp SP one way ISI marked complete all as specified.
257
-
-
M&L switch Modular type 6 Amp SP two way ISI marked complete all as specified.
8
-
-
M&L switch Modular type type 16 Amp SP one way, ISI marked complete all as specified.
30
-
-
M&LModular type socket outlet 5 pin 6 Amp flush type, ISI marked complete all as specified.
72
-
-
M&L Modular type socket outlet 2 in 1,5 pin 6/16 Amps, ISI marked complete all as specified.
28
-
-
M&L ceiling rose 3 phase PVC polycorbonate,isolated body, complete all as specified.
104
-
-
S & F Modular electronic fan regulator step type,2 module ,360 degree rotation complete all as specified and directed by engr-in charge.
28
-
-
M&L in replacement bell push,modular type,5 amp, ISI marked complete all as specified.
8
-
-
M&L in replacement bell ding dong AC,230 volts,single pole.
8
-
-
M&L in replacement angle Lamp holder with metallic ring, PVC/Polycorbonate type with back plate complete.
16
-
-
S & F in replacement LED bulb 9 watts, 900 lumens output, 6500K suitable for B-22 base .
16
-
-
M&L for earthing of machinery/equipment/panel/installed at power house/subatation, complete with galvanised steel earth palte electrode 600 x 600 x 6 mm thick buried directly in ground (Earth pit not less than 2.5 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to galvanised iron strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth protected by 40 mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electrical plate No.3 of SSR Part-I )2009) and testing on completion all as specified and directed.
4
-
-
Supply and fix in replacement MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete.
8
-
-
M&L MCB SPN 40 Amp "B" curve, 10 kA complete all as specified.
8
-
-
M&L MCB SP 6 to 32 Amp "B" curve ,10 kA. complete all as specified.
48
-
-
Supply and fix in replacement LED batten luminaire surface mounted, 4 feet system wattage of 22 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI80, Power Factor 0.95, THD 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level 105 Lumens/watt and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete.
Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures.
52
-
-
Supply and fix in replacement LED batten luminaire surface mounted 2 feet system wattage of 9-10 watts and not less than 900 lm system lumen output with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI 80, power factor 0.95, THD 10%, color temperature 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures.
8
-
-
M&L in replacement Decorative wall mounting CITY-1 Decorative wall light fixture made up of Polycarbonate, Including 12 W retrofit LED BULB (B-22 base). NOTE-1: Price of LED bulb included with city -1 fitting.
28
-
-
Supply and fix in replacement 10 watts bulkhead fitting with powder coated die cast aluminium housing with glass/ non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary - is 100lm/W with a life class of 25000 burning hours at L70 criteria, Power Factor 0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency 85%,THD20%, CRI80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures.
24
-
-
S&f in replacemnt exhaust fans metal body AC single phase 230/240 V of size 300 mm sweep, Air flow rate 900cum/min, Bird screen for protection against birds, double ball bearing, metal body with louvre with louvre for fixing of exhaust fan complete all as directed by Engr-in-Charge.
8
-
-
S&f in replacement fresh air fan PVC body air delivery 800 CMH , 5 number of blades, AC single phase 230/240 V of size 250 mm sweep with louvre fixed complete with suitable size ply by cutting into suitable size as required complete all as specified and directed by Engr-in-Charge.
8
-
-
M&L for breaking the old existing wall and making provn of a round hole for fixing of 300 mm sweep exhaust fan including making good to the disturbed wall/ portion and matching with existing colour.all as specified and directed.
8
-
-
Supply and fixing new BLDC fan against old ceiling fans three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery 220 cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper cable pvc insulated of suitable length, complete all as directed.
Note BLDC Fan should work on existing electronic fan regulator.
20
-
-
M& L for taking down one BLDC fan from each qtr deposit at MES complaint cell and refixing the same in the same qtr after complition of job all as per directed by engineer in charge.
8
-
-
Provn of modular box type metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.
16
-
-
Taking down carefully geysers 25/35/50 ltrs capacity opening for inspection reassembling and re-fixing in position after carrying out repairs rates included for replacement of pressed rubber gasket nuts, bolts etc complete all as directed. Note- Spare Parts such as tank, apparatus plate, outer body shall be measured and paid separately under relevant item of supply only.
8
-
-
S & F in replacement non return valve 15mm dia (ISI Marked) for Geysers of 50/35/25 Ltr capacity including GI Socket,Nipple, elbow ,bend etc and connecting up complete all as directed.
8
-
-
S & F in replacement for safety pressure valve of size 15 mm dia, ISI marked for geysers complete all as directed by Engineer-in-charge.
8
-
-
S & F in replacement chromium plated copper connection pipe 60 Cm long with two brass adopters and connecting up complete all as directed.
8
-
-
S & F in replacement pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for 35 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire.
6
-
-
Provn of Supply, installation, testing & commissioning, fabricated wall mounted LT panel board indoor type of size 1050x150x1200mm (approx) made out of 2 mm thick CRCA sheet suitable for 415 volts, 3 phase, 4 wire duly painted with two coats of synthetic enamelled paint including fixing of of 200 Amps rated copper bus bar for 3 phase and neutral duly fixed on suitable size of insulator, two Nos earth terminal test point, 3 Nos indicator lamp comprising of the following installed complete (a) INCOMING
(ii) MCCB 4 pole 100 Amps, 16 kA breaking capacity-01 No. (iii) digital Voltmeter with selector switch, Range 0 to 500 Volts -01 Nos
(iv) digital Ammeter 0 to 150 Amp with inbuilt selector switch, alongwith sutiable size of CTs set - 01 Nos
(b) OUTGOING
(i) MCB SPN 40 Amps 10 kA breaking capacity duly fixed on DIN rail channel-04 Nos ( Outgoing for each qtr) (ii) MCB SPN 10 Amps 10 kA breaking capacity duly fixed on DIN rail channel-02 Nos ( Outgoing for staircase and security light) (iii) suitable space for Single Phase Static Energy Meter - 04Nos. Note- (i) Marking of Qtrs Nos on outgoing feeders of Lt panel. (ii) Contractor before placing order, LT panel drawing shall be got approved by the GE.
2
-
-
M&L in replacement Modular socket outlet 2/3 pin 6/16 Amp universal socket 2 module complete all as specified and directed by Engineer in charge.
2
-
-
S&F Modular socket outlet 2/3 pin 6 Amp socket 2 module complete all as specified and directed by Engineer in charge.
3
-
-
Supply and Fixing wall mounted angular Electric chimney black colour of suction power not less than 1200Cum/Hr,Al casette with stainless steel outer layer ,touch control panel,3 speed motor with 250 watt with decorative smart cooker hood SS and glass ,energy efficent Led light with digital display , including ducting not less than 12 feet as per site required complete all as specified and as directed by Engr-in-Charge.
1
-
-
S&F sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 20 Amp 220 volts, 50 Hz, 10KA breaking capacity complete all as specified and directed.
1
-
-
Supply and fix Instant Hot Water Geyser 3 Ltrs capacity,3 KW with 5 Star rating corrosion proof thermoplastic external body ,withstand high pressure capacity to use in high rise buildings, ISI approved with suitable size of fastner and incl provision and connecting up of SS braided pipe with adopter for inlet and outlet water connection complete all as specified.
1
-
-
M&L for application of two coats of synthetic enamel paints
4
-
-
Schedule of Credit
-
-62207
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements