Military Engineer Services Tender
... More
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date18 Feb 2025
Closing Soon18 Mar 2025
Tender Amount₹ 48,26,000
Costs
EMD
₹ 96,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_698421_1Tender No
GE/RND/T-96/DLI/2024-2025Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://mes.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply only engine oil, multi grade suitable for DG set Make :- Indian oil / Hindustan petroleum / Castrol / BPCL.
150
-
-
... More
Supply and filing of coolent.
50
-
-
... More
Supply Petroleum jelly.(1/2 kg plastic sealed container.)
2
-
-
... More
Supply and fill in batteries distilled water for topping up
20
-
-
... More
M & L for repairing of battery charging alternator engine mounted with replacement of any of the unserviceable part such as rectifier with voltage regulator , diode plate , carbon brushes for the following capacities and as directed :-
-
-
-
... More
24 volts capacity
2
-
-
... More
12 volts capacity
2
-
-
... More
Supply & fix in repair battery charging circuit suitable for 12 V,DC in existing DG set panel board including addition/ alteration in wiring system complete with auto transformer, diodes, filter circuit, condensers, DC Ammeter, DC volt meter with selector switches and indicating bulbs etc complete all as specified and directed.
3
-
-
... More
Supply and fixing in repair battery charging circuit suitable for 24 V,DC in existing DG set panel board including addition alteration in wiring system complete with auto transformer, diodes, filter circuit, condensers, DC Ammeter, DC volt meter with selector switches and indicating bulbs etc complete all as specified and directed.
3
-
-
... More
S & F in repair Water temperature gauge including sensor and cable complete as per sample complete all as specified and directed.
2
-
-
... More
S & F in repair CT cast resin type of ratio 200/5 amps, of suitable VA burden, as per sample complete all as specified and directed.
2
-
-
... More
S & F in repair CT cast resin type of ratio 100/5 amps, of suitable VA burden as per sample complete all as specified and directed.
2
-
-
... More
S & F in repair Power contactor 415v, 50Hz, AC suitable for following DG set Control panel / AMF Panels for the following capacities and as directed.
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
1
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
1
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
S & F in repair Time delay relay suitable for 15 to 437.5 KVA DG Set complete all as specified and directed.
2
-
-
... More
M&L for tappet setting of following capacities of DG sets.
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
2
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Supply only diesel filter element with O ring, suitable for following capacities of DG sets :-
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
3
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Supply only oil filter element with O ring, suitable for following capacities of DG sets :-
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
3
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Supply only by pass filter element with O ring suitable for following capacities of DG sets :-
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
3
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Supply only air filter element suitable for following capacities of DG sets :-
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
3
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Supply only fan belt suitable for following capacities of DG sets:-
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
3
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Supply only belt for battery charging alternator for following capacities of DG sets :-
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
3
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Supply only rubber hose pipe set for water circuit complete with clamps, suitable for following capacities of DG sets :-
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
3
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
S & F in repair Water temperature gauge including sensor and cable complete as per sample. Make : Pricol/ Yenkey
3
-
-
... More
M & L for Dismantling of radiator , taking it to work shop for overhauling & cleaning descaling with acid removal of leakage, welding brazing & refixing it duly repaired etc all as directed by Engineer- in- Charge
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
3
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Calibration of FIP and injectors from the authorised dealer including petty repairs to make the FIP functional for the following capacities of DG sets including necessary spares required for smooth functioning of FIP
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
3
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
M&L for repair / overhauling of self starter incl. replacement of carbon brushes, bearing, bushes, rewinding of armature and field etc. and varnishing complete all as directed for the following capacity :-
-
-
-
... More
(a) 24 Volts make- Lucas or as per generator
3
-
-
... More
(b) 12 Volts Make-Lucas or as per generator
3
-
-
... More
Preparation of old painted surfaces of the DG Set including radiator, fuel tank etc of the following capacities complete degreasing and spray painting the same with two coats of approved synthetic enamel paint of approved shade including writing SM/MES nos on DG set complete all as directed by Engr-in-Charge.
-
-
-
... More
(a) D. G . Set 15 to 437.5 KVA
5
-
-
... More
Supply and fix in repair automatic voltage regulator up to 160 KVA DG set with facility of auto / manual mode as per existing capacity and make suitable for DG sets complete as per existing DG sets all as directed.
1
-
-
... More
Supply and fix in repair automatic voltage regulator above 320 to 437.5 KVA DG set complete as per existing DG sets all as directed.
2
-
-
... More
Supply and fix in repair fuel steel braided pipe with benjo bolts and washers etc complete of length upto 30cm long complete all as specified and directed.
1
-
-
... More
Supply and fix in repair fuel steel braided pipe with benjo bolts and washers etc complete of length 30 to 45cm long complete all as specified and directed.
1
-
-
... More
Supply and fix in repair fuel steel braided pipe with benjo bolt and washers etc complete of length 45 to 60cm long complete all as specified and directed.
1
-
-
... More
Supply and fix in repair control wiring of the DG set up to 160 KVA complete incl provision of additional auto cables heavy duty suitable for Gen set application complete all as specified and directed.
1
-
-
... More
Supply and fix in repair control wiring of the DG set above 320 KVA up to 437.5 KVA complete incl provision of additional auto cables heavy duty suitable for Gen set application complete all as specified and directed.
1
-
-
... More
Supply and fix in repair pressure guage 0 to 7 Kg/sqcm along with sensor and cable and as directed.
1
-
-
... More
Supply and fix in repair lead acid battery 12 Volts 180 AH with initial charging and having indicators to know the status of level of electrolyte complete all as specified and directed.
10
-
-
... More
Supply and fix in repair lead acid battery 12 Volts 150 AH with initial charging and having indicators to know the status of level of electrolyte complete all as specified and directed.
4
-
-
... More
M & L for Top Overhauling only of DG set of following capacity of any make and including replacement of all spare parts required to complete the work to the satisfaction of Engineer-in-charge .
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
1
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
1
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Supply only Oil Sump packing set suitable for following DG sets
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
2
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
2
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Supply and fix solinoid valve suitable for following capacity DG sets for smooth functioning complete to the satisfaction of Engineer-in-Charge
-
-
-
... More
D. G . Set 15 to 20 KVA
1
-
-
... More
D. G . Set 30 to 62.5 KVA
1
-
-
... More
D. G . Set 160 KVA
1
-
-
... More
D. G . Set 320 KVA
2
-
-
... More
D. G . Set 437.5 KVA
1
-
-
... More
Supply and fix microprocessor based multifunction relay suitable for DG sets operation and showing the various parameters such as Volt, ampere, frequency, rpm etc as per existing make and sample suitable for upto 62.5 KVA DG sets etc complete all as specified and directed.
1
-
-
... More
Supply and fix microprocessor based multifunction relay suitable for DG sets operation and showing the various parameters such as Volt, ampere, frequency, rpm etc as per existing suitable for 160 KVA DG sets etc complete all as specified and directed.
1
-
-
... More
Supply and fix microprocessor based multifunction relay suitable for DG sets operation and showing the various parameters such as Volt, ampere, frequency, rpm etc as per existing suitable for 320 KVA DG sets etc complete all as specified and directed.
1
-
-
... More
Supply and fix microprocessor based multifunction relay suitable for DG sets operation and showing the various parameters such as Volt, ampere, frequency, rpm etc as per existing suitable for 437.5 KVA DG sets etc complete all as specified and directed.
1
-
-
... More
Supply and fix in repairs battery terminal made out of brass/bronze heavy duty suitable for 150 AH/180 AH 12 Volt Battery
12
-
-
... More
S&F in repair self starter for engine of DG Set upto 62.5 KVA of existing make complete with all connections and all accessories including all fitting all as specified and directed.
1
-
-
... More
S&F in repair self starter for engine of DG Set 160 KVA of existing make complete with all connections and all accessories including all fitting all as specified and directed.
1
-
-
... More
S&F in repair self starter for engine of DG Set 320 KVA of existing make complete with all connections and all accessories including all fitting all as specified and directed.
1
-
-
... More
S&F in repair self starter for engine of DG Set 437.5 KVA of existing make complete with all connections and all accessories including all fitting all as specified and directed.
1
-
-
... More
M&L for repair to AMF panel of DG set 15 KVA to 62.5 KVA including replacement of wiring of interlock system of AMF panel with suitable size of copper wiring including proper connection and testing complete all as specified and directed.
1
-
-
... More
M&L for repair to AMF panel of DG set 62.5 KVA to 160 KVA including replacement of wiring of interlock system of AMF panel with suitable size of copper wiring including proper connection and testing complete all as specified and directed.
1
-
-
... More
M&L for repair to AMF panel of DG set 320 KVA to 437.5 KVA including replacement of wiring of interlock system of AMF panel with suitable size of copper wiring including proper connection and testing complete all as specified and directed.
1
-
-
... More
Supply and Fix in replacement of Electronic timer suitable for AMF panel of DG set 62.5 KVA to 100 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed.
1
-
-
... More
Supply and Fix in replacement of Electronic timer suitable for AMF panel of DG set 160 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed.
1
-
-
... More
Supply and Fix in replacement of Electronic timer suitable for AMF panel of DG set 320 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed.
1
-
-
... More
Supply and Fix in replacement of Electronic timer suitable for AMF panel of DG set 437.5 KVA as per matching to exisitng, 230 V AC 50 Hz complete all as specified and directed.
1
-
-
... More
Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldfor for DG sets 15 to 62.5 KVA includung removing of existing asbestos rope or any other type of insulation complete all as specified and directed.
1
-
-
... More
Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldfor for DG sets 70 to 160 KVA includung removing of existing asbestos rope or any other type of insulation complete all as specified and directed.
1
-
-
... More
Supply and Cladding with glass/rock wool and aluminium sheets of exhaust manifoldfor for DG sets 200 to 320 KVA includung removing of existing asbestos rope or any other type of insulation complete all as specified and directed.
2
-
-
... More
Dismantling the fuel pump from the Engine of capacity 15 to 20 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed.
1
-
-
... More
Dismantling the fuel pump from the Engine of capacity 62.5 to 100 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed.
1
-
-
... More
Dismantling the fuel pump from the Engine of capacity 160 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete.
1
-
-
... More
Dismantling the fuel pump from the Engine of capacity 320 to 437.5 KVA ,transportng to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve,plunger,copper washer etc all as required including re-calibration,refixing and testing complete all as specified and directed.
2
-
-
... More
Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 15 to 20 KVA complete all as specified and directed.
1
-
-
... More
Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 62.5 to100 KVA complete all as specified and directed.
1
-
-
... More
Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 160 KVA complete all as specified and directed.
1
-
-
... More
Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 320 KVA complete all as specified and directed.
2
-
-
... More
Draining out the diesel tank, cleaning/washing out the sludge and re-filling with diesel for the DG Set of capacity 437.5 KVA complete all as specified and directed.
1
-
-
... More
Replacement of turbo chargers repairs kit suitable for DG set 62.5 to 100 KVA complete all as specified and directed.
1
-
-
... More
Replacement of turbo chargers repairs kit suitable for DG set 160 KVA.
1
-
-
... More
Replacement of turbo chargers repairs kit suitable for DG set 200 to 450 KVA
1
-
-
... More
Materials and labour for B check by authorised rep of manufacturer of DG set of cap 437.5 kva including replacement of oil filter, fuel filter, air filter after draining out engine/lubricant oil flushing and cleaning of oil chamber after opening of tappet cover/top cover tappet cleaning setting with injector timing adjustment refixing of tappet/top cover including replacement of tappet cover packing set, bonding and leak proof sollution, oil pan/chamber gasket at the servicing and other work comes under B check all as specified as directed. Note: Engine oil will be paid separately.
1
-
-
... More
Materials and labour for B check by authorised rep of manufacturer of DG set of cap 320 kva including replacement of oil filter, fuel filter, air filter after draining out engine/lubricant oil flushing and cleaning of oil chamber after opening of tappet cover/top cover tappet cleaning setting with injector timing adjustment refixing of tappet/top cover including replacement of tappet cover packing set, bonding and leak proof sollution, oil pan/chamber gasket at the servicing and other work comes under B check all as specified as directed. Note: Engine oil will be paid separately.
3
-
-
... More
Materials and labour for B check by authorised rep of manufacturer of DG set of cap 160 kva including replacement of oil filter, fuel filter, air filter after draining out engine/lubricant oil flushing and cleaning of oil chamber after opening of tappet cover/top cover tappet cleaning setting with injector timing adjustment refixing of tappet/top cover including replacement of tappet cover packing set, bonding and leak proof sollution, oil pan/chamber gasket at the servicing and other work comes under B check all as specified as directed. Note: Engine oil will be paid separately.
1
-
-
... More
Materials and labour for B check by authorised rep of manufacturer of DG set of cap 15 to 62.5 kva including replacement of oil filter, fuel filter, air filter after draining out engine/lubricant oil flushing and cleaning of oil chamber after opening of tappet cover/top cover tappet cleaning setting with injector timing adjustment refixing of tappet/top cover including replacement of tappet cover packing set, bonding and leak proof sollution, oil pan/chamber gasket at the servicing and other work comes under B check all as specified as directed. Note: Engine oil will be paid separately.
2
-
-
... More
Supply and fixing of ON load change over switch 440 volts 4 pole of rating 400 amps with encloser fixed on wall/ panel including nut/bolts/washers complete all as specified and directed.
2
-
-
... More
Servicing /Caliberation / Repairs to Air Circuit Breaker 800 to 1600 Amps by OEM of ACB only for EDO ( Electrically Draw Out) type/ MDO type(Mannually Draw out type)/ Fixed type. Taking out any type of ACB for servicing / repair and checking / caliberation of microprocessor release,Earth fault protection of 4 pole, 50 KA breaking capacity 415 volts with all draw out type mechanism, advanced self powered electronic protection units, neutral overload protection, automatic earth fault relay / over current relay , automatic safety shutter, inbuilt temperature protection, icu=ics=icw(1s)=50 KA fixed in panel complete including relay wiring checking ,LT UG cable connection with main incoming ACB complete connection for its healthy functioning all as directed by Engr in charge. Note- Certificate of Servicing /Caliberation will be provided by the contractor free of cost.
12
-
-
... More
Supply & fix in repair protection releases for air circuit breakers suitable for existing breakers as per site make / requirement including taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge.(Make- L&T- or equivalent in Legrand/ABB/Schenider).
3
-
-
... More
Supply & fix in repair earth fault realease for air circuit breakers suitable for existing breakers as per site make / requirement including taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge.(Make- L&T or equivalent in Legrand/ABB/Schenider).
3
-
-
... More
Supply & fix in repair shunt realease for air circuit breakers suitable for existing breakers as per site make / requirement including taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge.(Make- L&T- or equivalent in Legrand/ABB/Schenider).
3
-
-
... More
Supply & fix in repair under voltage realease for air circuit breakers suitable for existing breakers as per site make / requirement including taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge.(Make- L&T or equivalent in Legrand/ABB/Schenider).
3
-
-
... More
Supply & fix in repair lockable trip push button for air circuit breakers suitable for existing breakers as per site make / requirement including taking out breakers after taking shutdown of electric supply complete all as specified and as directed by Engr-in-Charge.(Make- L&T or equivalent in Legrand/ABB/Schenider).
3
-
-
... More
Supply and Fix in replacement of selector switch suitable for voltmeter and Ammeter complete all as specified and directed.
6
-
-
... More
Supply and Fix in replacement of under voltage relay suitable for DG set of capacity 62.5 KVA to 160 KVA.
1
-
-
... More
Supply and Fix in replacement of under voltage relay suitable for DG set of capacity 320 to 437.5 KVA.
1
-
-
... More
Attending the fault in APFC panel including repairing of APFC relay, Contactor of any make/capacity, digital lamp,switch and setting the APFC panel relay OEM for proper function, testing connection of capacitor bank of any capacity including replacing small parts below Rs 500/- repairing and blowing out dust from inside the APFC panel complete all as specified and directed.
10
-
-
... More
S&F in repair APFC controller 8 step for automatic correction of power factor suitable for 415 volt 3 phase power supply complete with necessary fixing complete as directed by Engr-in-charge.Make- L&T Cat no-ETACONM008R or equivalent in ABB/siemens.
1
-
-
... More
Supply and Fix in repairs digital voltmeter 0-500 volts square type complete with necessary fixing and 3 nos of CTs all as specified and as directed by Engr-in-charge. Make: L&T/Siemens/Schneider
6
-
-
... More
Supply and Fix in repairs digital ammeter 0-400 amps square type complete with necessary fixing and 3 nos of CTs all as specified and as directed by Engr-in-charge. Make: L&T/Siemens/Schneider
2
-
-
... More
S&F in repair Capacitor duty Contactors suitable for upto 10 KVAR capacitor bank complete all as specified and directed by Engineer-in-Charge. Make- L&T or equivalent in Siemens/Schneider)
2
-
-
... More
S&F in repair Capacitor duty Contactors suitable for upto 25 KVAR capacitor bank complete all as specified and directed by Engineer-in-Charge. Make- L&T or equivalent in Siemens/Schneider)
2
-
-
... More
S&F in repairs cable PVC insulated 3 core 2.5 Sqmm with stranded copper conductor 1100V grade from socket/switch to geyser complete all as specified and as directed.
180
-
-
... More
S&F in replacement of PVC insulated flexible copper conductor cable 1100 volts grade, 3 core of size 1.5 Sqmm complete all all as specified and directed.
180
-
-
... More
S&F in repair jointing kit for 11 kv ( earthed) grade cable indoor type for end termination, heat shrinkable of size 95 to 185 sq mm conforming to IS - 7098 part-II including thimblling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed.
2
-
-
... More
S&F in repair heat shrinkable straight through joint 11 kv heat shrinkable of size upto 95 sq mm conforming to IS - 7098 part-II including thimbling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed.
11
-
-
... More
S&F in repair straight through joint 11 kv heat shrinkable of size 120 to 400 Sqmm conforming to IS - 7098 part-II including thimbling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed.
5
-
-
... More
S&F in repair jointing kit for 11 kv ( earthed) grade cable indoor type for end termination, heat shrinkable of size 50 to 95 sq mm conforming to IS - 7098 part-II including thimblling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed.
2
-
-
... More
S&F in repair IP-43, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 4 way, 12 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed /surface on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing Make - Legrand / ABB/L&T/ Schenider. Note- MCCB 100 Amps 4 pole 16 KA as incomer will be measured seprately in relevant item..
1
-
-
... More
S&F in repair IP-43, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 8 way, 24 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed /surface on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing Make - Legrand / ABB/L&T/ Schenider Note- MCCB 100 Amps 4 pole 16 KA as incomer will be measured seprately in relevant item..
1
-
-
... More
S&F in repair, IP-43 ,MCB DB 8 way ,double door, with 100 amp rated busbar 240 V, SPN concealed / surface on wall as directed by Engr in charge including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make- Legrand or equivalent in ABB/L&T/ Schenider)
1
-
-
... More
M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size with 10 Sqmm , 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor FRLS- confirming to IS: 694-1990 with and including continuous earth wire of size 1x10 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour Caping Casing and its accessaries ISI marked of suitable size concealed in wall / on surface as per site requirement etc and connected to common earth dolly including all cutting / chases etc in any type of wall , making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.
(Note:-One meter of conduit along with 4x10 sq mm wire and 1x10 sq mm earth shall be measured as one unit length.)
50
-
-
... More
M/L in replacement for submain wiring including PVC casing capping 2 run 4 Sqmm cable PVC insulated copper conductor multi - stranded as per FRLS cable drawn through PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour / Caping Casing and its accessaries ISI marked of suitable size concealed in wall / on surface as per site requirement etc with all accessories including 4 Sqmm single strand copper conductor cable PVC insulated unsheathed for earth continuity connected to common earth dolly and all as specified .
50
-
-
... More
M & L for Earthing complete with Copper earth plate electrode '60cm × 60cm × 3 mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to 'Copper strip 20x3 mm by means of bolts, nuts, check 'nuts and washers of copper earth strip protected by provision of GI 'medium grade' pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of Phosphorus bronze with fixing arrangement ,funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate connected to earthing test point all as specified or indicated 'including testing on completion.NOTE:-Copper strip and GI pipe 40 mm bore medium grade for encasing Copper strip upto 7.50m length per earthing shall be deemed to be included in the unit rate.
8
-
-
... More
Providing and fixing 20mm x 3 mm copper strip in 40 mm dia GI pipe from earth electrode including connection with brass nut bolt spring washer excavation and re-filling etc as required strip on surface or in recess for connections etc as required.
180
-
-
... More
S&F in repair,Triple pole and earth enclosure with a three pin and earth plug with socket complete with one triple pole 32 Amps MCB TP concealed / surface on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing (Make - L&T or equivalent in Legrand/ABB/Schenider..
2
-
-
... More
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6 galvanized iron strip, complete all as specified and directed.
180
-
-
... More
M & L for Earthing complete (Generator, Transformer, lightning arrestor and feeder pillar box) with galvanised steel earth plate electrode '60cm × 60cm × 6mm thick, buried 'directly in ground (earth pit not less 'than 2.25 metres deep below normal ground 'level) with top edge of the plate not 'less than 1.5 metres below normal ground level', connected to 'galvanised iron strip 32x6mm by means of bolts, nuts, check 'nuts and washers of galvanised iron or steel earth strip protected by provision of GI 'medium grade' pipe 40mm bore including provision of concrete pit in PCC (1:2:4) type B1 (using 20mm graded stone aggregate) with 40mm thick cover in RCC (1:2:4) type B-1 reinforced with XPM (weight not less than 4 kg/sqm) and frame made out in MS angle iron of size 25x25x3mm with lugs 02 Nos and with MS handle made in 6mm dia round bar made to shape, including GI 'medium grade' 20mm bore pipe for watering, perforated at bottom 1.75m long placed on top edge of earth plate including including provision of mixture of charcoal dust & common salt packed upto minimum 150 mm all around the earth plate, test point made out of ohosphorus bronze with fixing arrangement ,funnel, wire mesh and earth work in hard/dense soil returning filling in and removal of surplus soil to a distance not exceeding 50mtr all as shown in electrical plate No. 3 of SSR Part I 2009 connected to earthing test point all as specified or indicated 'including testing on completion.NOTE:-GI strip and GI pipe 40mm bore medium grade for encasing GI strip upto 7.50m length per earthing shall be deemed to be included in the unit rate.
14
-
-
... More
Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 400 Sqmm 3.5 core.
100
-
-
... More
Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 240 Sqmm 3.5 core.
100
-
-
... More
Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 120 Sqmm 3.5 core.
120
-
-
... More
Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 70 Sqmm 3.5 core.
100
-
-
... More
Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 35 Sqmm 3.5 core.
100
-
-
... More
Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 16 Sqmm 4 core.
120
-
-
... More
Supply and laying 80mm bore light grade GI pipe fixed to walls / poles or laid in trenches, road crossing etc, for protection of under ground cable including sealing ends with hessian cloth impregnated with bituminous compound in ground and with suitable clamps, bolt/nuts etc for fixing on walls, poles etc. complete all as specified and directed.
10
-
-
... More
Supply and laying 50mm bore light grade GI pipe fixed to walls / poles or laid in trenches, road crossing etc, for protection of under ground cable including sealing ends with hessian cloth impregnated with bituminous compound in ground and with suitable clamps, bolt/nuts etc for fixing on walls, poles etc. complete all as specified and directed.
10
-
-
... More
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying of cables etc. and getting out in the following type of strata complete all as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
Soft/Loose soil
95
-
-
... More
Hard/ Dense soil
35
-
-
... More
Soft/disintegrated Rock
15
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.
130
-
-
... More
Removal of excavated material [soil] to a distance not Exc 50m and depositing where directed at a level not exc 1.5m above the starting point where directed complete all as specified and as directed by the Engineer - in - Charge.
15
-
-
... More
M&L for laying reinforced concrete pipes, class NP2 of dia 100 mm, 2 nos half round (for bottom and top) and before laying exacaved area shall be leveling all as specified and directed Engr-in-charge.
165
-
-
... More
S&F MCB, SP 20- 32 Amps,10 KA ,230 V, 'C'series in replacement of old damage/broken MCB SP
80
-
-
... More
S&F MCB, SPN, 40 Amps,10 KA ,230 V, 'C'series in replacement of old damage/broken MCB SPN
6
-
-
... More
S & F MCB TPN, 415 Volts, 40 Amps,10 KA ,230 V, 'C'series
8
-
-
... More
S & F MCB TPN, 415 Volts, 63 Amps,10 KA ,230 V, 'C'series
8
-
-
... More
Supply and fix MCB TP 63 Amps, 415 volts complete all as specified and as directed
7
-
-
... More
Supply and fix MCB TP 40 Amps, 415 volts complete all as specified and as directed
8
-
-
... More
Supply and Fix in replacement of MCCB 63 Amps to 100 Amps,16 KA,3 Pole,415V complete all as specified and directed.
10
-
-
... More
Supply and Fix in replacement of MCCB 125 Amps,16 KA,3 Pole,415Vcomplete all as specified and directed.
2
-
-
... More
Supply and Fix in replacement of MCCB 200 Amps,25 KA,3 Pole,415Vcomplete all as specified and directed.
2
-
-
... More
Supply and Fix in replacement of MCCB 250 Amps,25 KA,4 Pole,415Vcomplete all as specified and directed.
2
-
-
... More
Supply and Fix in replacement of MCCB 400 Amps,36 KA,3 Pole,415Vcomplete all as specified and directed.
2
-
-
... More
Supply and Fix in replacement of MCCB 630 Amps,50 KA,4 Pole,415Vcomplete all as specified and directed.
1
-
-
... More
M&L for Servicing of the window AC 1.5 ton capacity of any make, including oiling/greasing the blower motor, cleaning the evaporator condenser coils externally to remove the dust, reassembling and re-fixing the air conditioner at its original position or as directed by the experienced refrigeration mechanic complete all as specified and directed.
20
-
-
... More
All as per item Ser No.136 above but for split type AC (Inverter type) 1.5 ton capacity.
80
-
-
... More
All as per item Ser No.136 above but for split type AC 2.0 ton capacity.
30
-
-
... More
All as per item Ser No. 136 above but for split type AC 3.0 ton capacity.
8
-
-
... More
All as per item Ser No.136 above but for cassette type AC 3.0 ton capacity.
5
-
-
... More
M&L in rewinding of Fan Motor/blower motor of AC (Window/ Split Type) 1.5/2.0/3.0 TR Capacity complete all as specified and directed.
50
-
-
... More
M&L in replacement Fan Motor of AC (Window/ Split Type) 1.5 TR Capacity including taking out the unservice-able Fan Motor from the AC complete all as specified and directed.
50
-
-
... More
All as per item Ser No 142.00 above but AC (Window/Split Type) 2.0 TR Capacity.
20
-
-
... More
All as per item Ser No 142.00 above but AC (Window/Split Type) 3.0 TR Capacity.
20
-
-
... More
S&F cooling coil suitable for Split type room AC 1.5 TR including taking out unserviceable cooling coil complete all as specified and directed.
20
-
-
... More
S&F Condensing coil suitable for Split type AC 1.5 TR including taking out unserviceable condensing coil complete all as specified and directed.
15
-
-
... More
S&F cooling coil suitable for Split type room AC 2.0 TR including taking out unserviceable cooling coil complete all as specified and directed.
30
-
-
... More
S&F Condensing coil suitable for Split type AC 2.0 TR including taking out unserviceable condensing coil complete all as specified and directed.
35
-
-
... More
S&F cooling coil suitable for split type AC 3 TR capacity including taking out unserviceable cooling coil complete all as specified and directed.
8
-
-
... More
S&F Condensing coil suitable for split type AC 3 TR capacity including taking out unserviceable condensing coil complete all as specified and directed.
7
-
-
... More
Suuply & Fix in replacement of Hermitacally sealed compressor for split type AC capacity 1.5 Ton complete all as specified and directed.
20
-
-
... More
Suuply & Fix in replacement of Hermitacally sealed compressor for split type AC capacity 2.0 Ton complete all as specified and directed.
15
-
-
... More
Suuply & Fix in replacement of Hermitacally sealed compressor for split type AC capacity 3.0 Ton complete all as specified and directed.
8
-
-
... More
S&F in replacement PCB with remote for window type AC of 1.5 Ton capacity including taking out unserviceable PCB unit complete all as specified and directed.
15
-
-
... More
S&F in replacement PCB with remote for Split type AC of 1.5 Ton capacity including taking out unserviceable PCB unit complete all as specified and directed.
25
-
-
... More
S&F in replacement PCB with remote for Split type AC of 2.0 Ton capacity including taking out unserviceable PCB unit complete all as specified and directed.
20
-
-
... More
S&F in replacement PCB with remote for Split type AC of 3.0 Ton capacity including taking out unserviceable PCB unit complete all as specified and directed.
8
-
-
... More
M&L in repair of PCB for Split/window AC of 1.5/2.0/3.0 Ton capacity complete all as specified and directed.
50
-
-
... More
Supply and charging the gas refrigerant R22 of window/split type AC upto 3 ton capacity including testing after application of nitrogen gas pressure to find out any leakage, brazing and stopping of all leakage detected, re-application of nitorgen pressure to ensure leak proof gas circulator system flushing out the nitrogen gas complete all as specified and directed.
50
-
-
... More
All as per item Ser No 159.00 above but R- 410 for split type AC up to 3 TR capacity.
50
-
-
... More
All as per item Ser No 159.00 above but R-32 Refg upto 03 Ton AC.
50
-
-
... More
S&F in replacement of electrolyte grade copper tubing of size 1/4" suitable for any type of split type AC including synthetic rubber foam complete all as specified and directed.
Note: - The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution the work for multy story building.
100
-
-
... More
All as per item Ser No.162.00 above but size 1/2".
100
-
-
... More
All as per item Ser No.162.00 above but size 3/8".
80
-
-
... More
All as per item Ser No.162.00 but size 5/8".
80
-
-
... More
M&L in replacement Capacitor Running 36 mfd – 45 mfd suitable for new/star rated for AC (Window/Split Type) 1.5 TR/2.0 TR Capacity and of any make including taking out unserviceable Capacitor from AC complete all as specified and as directed.
50
-
-
... More
M&L in replacement Capacitor Starting 80 mfd – 120 mfd suitable for old ones AC (Window/Split Type) 1.5 TR/2.0 TR Capacity and of any make including taking out unserviceable Capacitor from AC complete all as specified and as directed.
50
-
-
... More
M&L in replacement Fan Motor Capacitor 4 mfd of suitable for new/star rated AC (Window/Split Type) 1.5/2.0TR capacity including taking our unserviceable Fan motor capacitor from AC complete all as specified and as directed.
100
-
-
... More
Dehydration and Filteration of 11 KV grade Transformer oil through stream line filteration plant for extracting moisture content in the oil and carbon deposits and achiving the dielectric strength to 40 KV for 1 minute with a sphare gap of 2.5 mm and also checking the acidity of oil with acidity test kit and submitting the necessary test kit report /certificate, refilling the filtered oil into any KVA transformer etc as specified and directed by Engr in charge. Note: The filtration includes taking necessary connection to filtration plant from the transformer to their hose pipe by opening the inlet and outlet of transformers and closing the same after filtration.
1750
-
-
... More
Taking out HT OCB ,11 KV grade 400 Amps rating from HT panel for servicing / repairs by dismantling the HT OCB operating mechamism, inspection of control wiring realignment of moving contacts with fixed contacts assy, vaccum interrupter ,checking of relays for protection, greasing of all moving parts of mechanis, checking and realignment of mechanism for its proper functioning and operation, re-assembling of HT VCB , fixed in its original position , testing for functions, and commissioning complete all as directed.
8
-
-
... More
Supply and fixing of push button suitable for 400 amps OCB complete all as specified and directed.
2
-
-
... More
Calibration of 11 KV grade HT OCB relays of various types / Make by OEM through primary & Secondary injection method by bringing relay test kit, software PC system and other required measuring equipments to the site, after testing refixing to OCB 11 KV panel all as directed by Engr-in-Charge. Note- Certificate of this test will be provided by the contractor free of cost.
4
-
-
... More
Testing of HT current transformer (set of three) through primary current injection method and also checking the connected panel wiring by brining required test kit and other required testing equipment and also checking tripping and closing operation complete all as directed by Engr-in-Charge.
5
-
-
... More
Supply, install, test, commissioning of 11 KV grade HT OCB current transformer in repair CT of 11 KV grade with CT ratio 300/150/5-5 fixed with HT OCB 11 KV including necessary cable connection etc suitable for fixing in HT panel board of any make including modification required at site to be carried to fix CT upto recess/coils including removing the burnt CTs complete all as directed.
6
-
-
... More
M & L for checking of Potential Transformer by conducting ratio test/meggering for IR values, provided in OCBs 11 KV feeders checking of control wiring meters, relay and tripping system.complete all as directed by Engr-in-Charge.
1
-
-
... More
S & F in repair Potential Transformer for HT OCB 11/110 volts/3, 100 VA resincast appoxy moulded with metal enclosure as per site requirement and connecting bus bar including providing bus bar, testing for functionality complete all as directed.
1
-
-
... More
Supply and fixing HT Voltmeter, range 0 to 15 KV auxillary supply 110 Volts suitable for fixing with existing HT OCB 11 KV panel.complete all as directed.
1
-
-
... More
Supply and fixing ammeter suitable for fixing with existing HT OCB 11 KV panel ratio like 300/5,200/5,100/5 complete all as directed by Engr-in-Charge.
1
-
-
... More
Supply only hand gloves HT for operating / handling sub station upto 22 KV ISI Marked.complete all as directed by Engr-in-Charge.
1
-
-
... More
Supply and fix in repair breather assembly suitable for existing transformer upto 500 KVA capacity after removing the unserviceable one complete all as directed by Engr-in-Charge.
1
-
-
... More
Repair to transformer to arrest oil leakage by removing transformer oil , dismantling the top cover alongwith conservator tank/ OLTC, replacing the top gasket washer etc replacement of HT/LT bushes complete dismantling the cooling fins and welding where leakage to arrest oil leakage and reassembling the transformer, refilling filtered oil testing complete for transformer capacity upto 500 KVA all as directed by Engr-in-Charge. Note- Filteration of oil and all other spares/ Material will be measured and paid separately .
2
-
-
... More
Dismantalling the exsisting Transformer upto 1000 KVA transformer by disconnecting incoming and outgoing HT/LT cables/bus duct connection, shifting to workshop by arranging suitable vehicle and crane and removing tank top cover /lid of 11 KV grade at workshop , draining out the transformer oil and keeping in safe custody in clean and dry containers for reuse. and carrying out the maintenance work by experienced and qualified Engineer , dismantling the OLTC/ conservator tank , dismantling HT/LT bushings from core winding and lifting the core assy carefully without damaging by using the tripod/ chainpully/crane etc, cleaning / removing the sludge from the transformer tank, cleaning the OLTC/ conservator tank and checking the serviceability of the coil / core winding , checking the condition of the body , cleaning the coil/ core assy , refixing of core , core assy , OLTC/ conservator tank, HT/LT winding connection, connection of protective devices like buckholz relay connection,winding temperature indication ,oil temperature indication including fixing new gaskets to transformer top and all other places gaskets/washer , terminal studs of HT/LT sides and reassembling of transformer after repairs, refitting the transformer coil incl improvement of insulation resistance value within desired level by heating or any other method to required level and re assembling at the site, connection of LT/HT sides, testing and charging the transformer complete all as directed to the entire satisfaction of Engr in Charge. Note- Filteration of oil and all other spares/ Material will be measured and paid separately .
1
-
-
... More
Supply only silica gel in the transformer breather assy including taking out UNSV silicagel complete.
2
-
-
... More
Supply only HV Bushing suitable for upto 1000 KVA transformer including connection complete all as directed.
2
-
-
... More
Supply only LV Bushing suitable for upto 1000 KVA transformer including connection complete all as directed.
2
-
-
... More
Supply only copper terminal stud , both end threaded complete with double nuts and washers with heat resistant gasket suitable for upto 1000 KVA transformer LV side 415 volts including connection complete all as directed.
2
-
-
... More
Supply and fill transformer oil duly filtered and tested confirming to IS 335 1963 as amended including all testing complete all as directed.
400
-
-
... More
Supply only (HV side) copper winded coil of existing type size and guage 11000 volts complete with insulating material for trnsformers of upto 1000 KVA complete all as directed.
200
-
-
... More
All as per items Ser NO 188.00 here in before but LT side, 415 volts grade complete all as directed.
180
-
-
... More
Supply and fixing of limit switch suitable for 400 amps VCB/OCB complete all as specified and directed.
2
-
-
... More
Supply and fixing of AC/DC controling unit suitable for 400 amps VCB/OCB complete all as specified and directed.
1
-
-
... More
Supply and fixing of Triping and closing coil 24 v DC suitable for 400 amps VCB/OCB complete all as specified and directed.
1
-
-
... More
Supply and fixing of bushing suitable for 400 amps OCB complete all as specified and directed.
1
-
-
... More
Supply and fixing of bushing rod suitable for 400 amps OCB complete all as specified and directed.
1
-
-
... More
Supply and fixing of CT with ratio 100/50/5+1 suitable for 400 amps OCB complete all as specified and directed.
1
-
-
... More
Supply and fixing of 11 kv OCB spout contact suitable for 400 amps OCB complete all as specified and directed.
9
-
-
... More
Supply and fixing of panel wiring complete suitable for 400 amps OCB complete all as specified and directed.
1
-
-
... More
Supply and fixing of earth fault over current relay IDMT relay suitable for 400 amps OCB complete all as specified and directed.
2
-
-
... More
Painting of HT OCB in existing colour with two coats complete all as specified and directed.
4
-
-
... More
Taking proper shutdown & Isolate the HT electric supply and connecting LT cable 400 to 630 sqmm LT cable in existing LT panel with lugs, glands complete all as directed.
2
-
-
... More
S&F in replacement of HRC/MCB fuse link clip type on fuse link 2 to 20 amps operating voltage 415 Volt complete all as specified and directed.
2
-
-
... More
S&F in replacement of fuse base suitable for cylindrical/DIN type HRC fuse of capacity 2-32 amps complete all specified and directed.
2
-
-
... More
S&F in replacement of closing spring assembly complete all as specified and directed.
2
-
-
... More
S&F in replacement of tripping spring assembly complete all as specified and directed.
2
-
-
... More
S&F in replacement of charging motor cut off limit switch complete all as specified and directed.
2
-
-
... More
S&F in replacement of spring charging handle motorized mechanism of VCB complete all as specified and directed.
2
-
-
... More
S&F in replacement of push button bracket assembly complete all as specified and directed.
1
-
-
... More
S&F in replacement of bus bar support insulator 75 mm dia including all fixing accessories complete suitable or VCB/HT bus bar chamber all as specified and directed.
2
-
-
... More
S&F in replacement of bus bar barrier as per existing (set of three) with nuts bolts complete all as specified and directed.
2
-
-
... More
S&F in replacement of toggle switch for space heater complete with all accessories all as specified and directed.
2
-
-
... More
S&F in replacement of charged/ discharged indication assembly complete all as specified and directed.
2
-
-
... More
S&F in replacement of 11 pin anti pumping relay 110 volt DC complete all as specified and directed.
2
-
-
... More
S&F in replacement of bottom terminal with jaw contact complete all as specified and directed.
1
-
-
... More
S&F in replacement of top terminal with jaw contact complete all as specified and directed.
1
-
-
... More
S&F in replacement of PT epoxy female bushing suitale for R Y B phase complete all as specified and directed.
1
-
-
... More
S&F in replacement of PT epoxy male bushing suitale for R Y B phase complete all as specified and directed.
1
-
-
... More
S&F in replacement of PT fuse 11 KV complete all as specified and directed.
1
-
-
... More
S&F in repair HT bushing 11 kv suitable for upto 1000 KVA transformer including brass rod complete with gasket as per matching to existing all as specified and directed.
2
-
-
... More
S&F in repair LT bushing 11 kv suitable for upto 1000 KVA transformer including brass rod complete with gasket as per matching to existing all as specified and directed.
2
-
-
... More
S&F in repair head gasket sheet 6 mm thick suitable for transformer upto 1000 KVA capacity including replacement of nuts bolts washers including necessary T&P required at site complete all as specified and directed.
2
-
-
... More
S&F in repair temparature gauge analog type complete with all accessories as per matching to existing complete all as specified and directed.
1
-
-
... More
S&F in repair three phase over current earth fault relay MC-61 as per matching to existing one including all accessories and wiring complete all as specified and directed.
1
-
-
... More
S&F in repair three phase over current earth fault relay MC-61A as per matching to existing one including all accessories and wiring complete all as specified and directed.
1
-
-
... More
S&F in repair Led type indication lamp of voltage AC/DC set of RYB as per matching to existing complete all as specified and directed.
3
-
-
... More
S&F in repair battery charger of capacity 12 volts for AMF panel complete all as specified and directed.
1
-
-
... More
S&F in repair battery charger of capacity 24 volts for AMF panel complete all as specified and directed.
1
-
-
... More
S&F in repair HT three phase digital multifunctional meter suitable for measure all electricl qualities like voltmeter, current, power, Frequency & power factor complete all as specified and directed.
2
-
-
... More
S&F in repair LT three phase digital multifunctional meter suitable for measure all electricl qualities like voltmeter, current, power, Frequency & power factor complete all as specified and directed.
3
-
-
... More
S&F in repair VCB/OCB power pack unit 24 volt DC 7 AH with battery bank for backup for panel as per existing matching complete all as specified and directed.
1
-
-
... More
M&L for painting of LT panel indoor/outdoor type area of front face of panel exc 1.5 sq mm but n. exc 2.5 sq m each with spray gun with two coats of synthetic enamel heat resistant grey paint including preparation of old painted surface/ removing old faded/rust/cemeted material of surface of complete LT panel , complete all as specified and directed.
4
-
-
... More
S&F in repair old unserviceable angle iron work and fixing/fabrication of angle iron frame 40x40x5 mm thick for LT panel complete including welding work at site complete all as specified and directed.
50
-
-
... More
S&F in repair LT panel of any size/make incl cutting, welding of front panel back cover and top cover made of CRCA steel sheet of size not less than 2/3.15 mm thick as per site requirement including colour matching with existing including hinges and locking device complete all as specified and directed.
10
-
-
... More
S&F in repair of alluminium bus bar PVC insulated in red,yellow, blue & black colours of rating 400 amps complete all as specified and directed.
20
-
-
... More
S&F in repair of alluminium bus bar PVC insulated in red,yellow, blue & black colours of rating 800 amps complete all as specified and directed.
20
-
-
... More
S&F in repair of alluminium bus bar PVC insulated in red,yellow, blue & black colours of rating 1500 amps complete all as specified and directed.
30
-
-
... More
S&F in repair of APFC relay for upto 225 KVAR 10 stages including wiring CTs and all connected item complete all as specified and directed.
2
-
-
... More
S&F in repair of LED type indicating lamp type of voltage AC/DC set of RYB as per matching to existing complete all as specified and directed.
3
-
-
... More
S&F in repair of capacitor bank MP-05 KVAR capacity rated 440 volts AC, 3 phase, 50 Hz delta connection round type complete all as specified and directed.
2
-
-
... More
S&F in repair of capacitor bank MP-10 KVAR capacity rated 440 volts AC, 3 phase, 50 Hz delta connection round type complete all as specified and directed.
2
-
-
... More
S&F in repair of capacitor, contractor MO C5 to C25 complete all as specified and directed.
6
-
-
... More
M&L for bringing Cable testing van (Fault Finder) for detecting the location of fault in the LT UG cable 1.1 KV and HT UG cable 11 KV grade of any size complete all as specified and as directed
20
-
-
... More
M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6 galvanized iron strip, complete all as specified and directed.
50
-
-
... More
Supply and lay in trenches burnt brick sub class 'B' standard size for cable protection keeping width of the brick parallel to the length of the cable all as specified and directed.
3
-
-
... More
Supply ad laying un-reinforced factory made precast concrete cable cover, class HV, type 1, flat size-300x180x40 mm complete all as specified and directed.
500
-
-
... More
Supply and spread clean dry river sand in trenches ,ducts including leveling, punning for cushioning of cables all as specified Note : Punned thickness of sand cushioning shall be measured.
15
-
-
... More
S&F in replacement MCCB 630 Amps 4 Pole breaking capacity 50 KA microprocessor based (ICS=100% of ICU) with rotary handle including taking down old u/s MCCB complete all as specified and directed..
1
-
-
... More
S&F in replacement MCCB 400 Amps 4 Pole breaking capacity 50 KA microprocessor based (ICS=100% of ICU) with rotary handle including taking down old u/s MCCB complete all as specified and directed..
1
-
-
... More
S&F in replacement MCCB 250 Amps 4 Pole breaking capacity 50 KA microprocessor based (ICS=100% of ICU) with rotary handle including taking down old u/s MCCB complete all as specified and directed..
1
-
-
... More
S&F in replacement MCCB 160 Amps 4 Pole breaking capacity 25 KA thermal magnetic release (ICS=100% of ICU) including taking down old burnt MCCB complete.
1
-
-
... More
S&F in replacement MCCB 125 Amps 3 Pole breaking capacity 25 KA fixed type (ICS=100% of ICU) including taking down old burnt MCCB complete.
2
-
-
... More
S&F in repair MCCB 63/100Amps 3 Pole breaking capacity 16KA thermal magnetic release ((ICS=100% of ICU) including taking down old burnt MCCB complete. Note: as per site requirement directed by Emgr-in-charge/JE
4
-
-
... More
S&F in repair jointing kit for 11 kv ( earthed) grade cable indoor type for end termination, heat shrinkable of size 50 to 95 sq mm conforming to IS - 7098 part-II including thimblling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed.
2
-
-
... More
S&F in repair jointing kit for 11 kv ( earthed) grade cable indoor type for end termination, heat shrinkable of size 95 to 185 sq mm conforming to IS - 7098 part-II including thimblling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed.
2
-
-
... More
S&F in repair straight through joint 11 kv heat shrinkable of size upto 95 sq mm conforming to IS - 7098 part-II including thimbling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed.
1
-
-
... More
S&F in repair straight through joint 11 kv heat shrinkable of size 120 to 185 sq mm conforming to IS - 7098 part-II including thimbling, nut/bolts & washers, HV insulating tape etc, complete all as specified and directed.
1
-
-
... More
Supply and laying in replecement XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 11000 volts, grade cross sectional area 150 Sqmm 3 core complete.
175
-
-
... More
Supply and laying in replecement XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 11000 volts, grade cross sectional area 120 Sqmm 3 core complete.
50
-
-
... More
Supply and laying in replecement XLPE insulated screened, PVC bedded galvanised steel strip or wire armoured electric power cable(Heavy duty) with aluminium conductor, 11000 volts, grade cross sectional area 95 Sqmm 3 core complete.
50
-
-
... More
M&L for PCC 1:3:6 type C-1 (using 20 mm graded stone aggregates) for repairing of LT pole/ panel foundation etc including filling in road cuts/hard standing etc complete all as specified and directed.
3
-
-
... More
M&L for PCC 1:4:8 type D-1 (using 40 mm graded stone aggregates) for repairing of LT pole/ panel foundation etc including filling in road cuts/hard standing etc complete all as specified and directed.
1.2
-
-
... More
Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 400 Sqmm 3.5 core.
50
-
-
... More
All as item No 261.00 but 300 Sqmm 3.5 core.
50
-
-
... More
All as item No 261.00 but 240 Sqmm 3.5 core.
50
-
-
... More
All as item No 261.00 but 185 Sqmm 3.5 core.
50
-
-
... More
All as item No 261.00 but 120 Sqmm 3.5 core.
50
-
-
... More
All as item No 261.00 but 70 Sqmm 3.5 core.
50
-
-
... More
All as item No 261.00 but 25 Sqmm 3.5 core.
95
-
-
... More
Supply and laying 80mm bore light grade GI pipe fixed to walls / poles or laid in trenches, road crossing etc, for protection of under ground cable including sealing ends with hessian cloth impregnated with bituminous compound in ground and with suitable clamps, bolt/nuts etc for fixing on walls, poles etc complete all as specified and directed.
20
-
-
... More
Supply and laying 50mm bore light grade GI pipe fixed to walls / poles or laid in trenches, road crossing etc, for protection of under ground cable including sealing ends with hessian cloth impregnated with bituminous compound in ground and with suitable clamps, bolt/nuts etc for fixing on walls, poles etc. complete all as specified and directed.
25
-
-
... More
Supplying and laying synthetic rubber insulated mats 3 mm thick for voltage upto 33 KV (size 2 m x 1 mtr) for electrical purpose as per IS 15652-2006 suitable for electrical shock safety complete all as directed.
10
-
-
... More
S&F 1250 Amp vacuum interrupter for 11KV Vacuum Circuit Breaker complete all as specified and directed.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%