Military Engineer Services Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Military Engineer Services - MES Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date24 Dec 2024
Closing Date15 Jan 2025
Tender Amount₹ 44,83,862
Costs
EMD
₹ 89,700Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_684308_1Bid Award Id
ViewTender No
GE/SW-65/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply only in replacement of Engine oil Grade SAE 15W40, suitable / Compatible to 750 KVA & 160 KVA DG Set (Make Volvoline/ API CH-4) all directed. Note : Engine Oil will be supplied in the sealed packed container only.
345
-
-
... More
Supply and top up of Distilled Water with electrolyte mix, suitable for Batteries of DG Set complete all as specified and directed. Note : Distilled Water will be supplied in the sealed packed container/ Bottles only.
60
-
-
... More
Cleaning of RCC water Tank of size (8x6x2) Mtr (approx), used for DG set exhaust system by draining out its old contaminated water, taking out silt/ dirt deposition (inside & the tank), cleaning it completely by manual labour with necessary T&P removal of rubbish to a distance not exc 1000 mtrs i.e Garbage dumping area, (outside the main gate), re-filling the fresh water in the same tank complete all as specified and directed.
2
-
-
... More
Cleaning of MS fuel tank 1000 Litre capacity of 750 KVA DG Set, draining out fuel in a separate container, taking out silt/ dirt deposition (inside the tank), cleaning it completely by manual labour with necessary T&P, refilling and connecting with fuel pipes with DG sets all as per site requirement and directed.
2
-
-
... More
Preventive Maintenance and Servicing of AMF Panel indoor type for 750 KVA DG Set through authorised dealer by checking the Contactor, Relays, Timer and other electronic parts etc of Mains and DG, cleaning from inside by using high pressure Blower/ Vaccum Cleaner etc. as per mfg instruction manual and standard practice including testing, rectifying the fault and calibration of relay & timer of AMF Panel including replacement with new minor spares found faulty with entire satisfaction of Engr-in-Charge. Note:- Major Spares used during servicing will be measured and paid separately under respective item of BOQ.
2
-
-
... More
All as per Ser Item No. 8 here-in-before but AMF panel for panel for 160 KVA DG Set all as directed by Engr-in-Charge.
1
-
-
... More
Supply only in replacement of electronic engine cranking relay to operate in 440/220 volt AC circuit in AMF Panel complete all as specified and directed.
1
-
-
... More
Supply only in replacement of electronic earth fault relay for AMF panel suitable to operate in 440/ 220 volt AC circuit, suitable/ compatible to existing AMF Panel of 750 KVA DG Set.
1
-
-
... More
Supply only in replacement of Over Current Relay for AMF panel suitable to operate in 440/220 volt AC circuit, suitable/Compatible to existing AMF Panel of 750 KVA DG Set.
1
-
-
... More
Supply only in replacement of Reverse Power Relay for AMF panel, suitable/ Compatible to existing AMF Panel of 750 KVA DG Set.
1
-
-
... More
Supply only in replacement of electronic timer, suitable/Compatible to existing AMF panel of 750 KVA DG Set complete all as specified and directed.
1
-
-
... More
Supply only in replacement of Under Voltage Relay (UVR) 440/220 volt, AC circuit, suitable /Compatible to existing AMF Panel complete all as specified and directed.
1
-
-
... More
Supply only in replacement of DC Voltmeter Analog type for monitoring of Voltage of DG Set Battery, suitable /Compatible to existing AMF Panel of 750 KVA DG Set complete all as specified and directed.
1
-
-
... More
Supply only in replacement of DC Ammeter Analog type for monitoring of Amp of DG Set Battery, suitable /Compatible to existing AMF Panel of 750 KVA DG Set complete all as specified and directed.
1
-
-
... More
Supply & Laying in replacement Synthetic Rubber Insulated Mat 2.5 mm thick for Voltage upto 11KV working pressure conforms to IS 15652-2006 (Superseding IS 5424) suitable for Electrical Shock Safety including applying adhesive to fix before laying the new one complete all as specified and directed.
20
-
-
... More
S&F in replacement of Battery SMF, 12 Volt, 180 AH capacity complete all as specified and directed.
4
-
-
... More
S&F in replacement of battery lead with stranded copper conductor of size 95 sqmm single core PVC insulated flexible n.exc 1.0 Mtr long along with battery copper terminal for negative and positive terminal duly soldered including testing etc complete all as specified and directed.
8
-
-
... More
M&L in replacement for Synthetic insulation mat of size 2m x 1m x 19mm (as per sample) complete all as directed.
8
-
-
... More
Supply & Laying in replacement Synthetic Rubber Insulated Mats 2 mm thick (as per sample) for Voltage upto 3.3 KV working pressure conforms to IS 15652-2006 (Superseding IS 5424) suitable for Electrical Shock Safety including applying adhesive to fix before laying the new one complete all as specified and directed.
40
-
-
... More
Preventive Maintenance and Servicing of Cooling Tower for 750 KVA DG Set through authorised dealer Engineer by drain out the complete water from Cooling tower, removing the dirt/ silt from the pan, checking all gate valve, motor, tightening nut bolts of all the components (if any type of defects) noticed during the maint service, replace the required faulty parts, with new parts including refilling the water and testing the Cooling tower complete all as specified and directed at site.
2
-
-
... More
All as per item No 23 but for Cooling Tower of 160 KVA DG Set.
1
-
-
... More
M&L for taking down of worn out electric motor of 5 HP, 3-ph, 415 V from Cooling Tower of DG Set carrying to workshop, opening the same, rewinding with super enameled copper winding wire of same gauge/size, varnishing and replacing paper insulation materials, bearings, gasket and worn out nut, bolts, washers, gland etc. Reassembling the motor and refixing at site its original position, testing on load complete all as specified and directed. Note:- Transportation charges from work site to civil workshop and vice-versa deemed to be included in this quoted rate.
2
-
-
... More
M&L for preparation of old painted surface of Cooling Tower Body, GI tubing etc by brushing/cleaning and removing stains, grease spots with thinner and sand paper and painting the surface with applying two coats of synthetic enamel paint by spray painting carefully complete all as specified and directed.
25
-
-
... More
Cutting/ digging out bushes, surrounded with sepplings etc from their roots of complete Cooling Tower area size 15 x 12 Mtr (approx) including fencing/ wall and removal of waste to a distance n.exc 1 Km i.e, at Garbage/ dumping area outside the main gate complete all as directed by Engr-in-Charge.
2
-
-
... More
Cutting of tree branch, cutting of high rise trees, overhanging/ interferences to the Cooling Tower of DG Set (size of tree branch approx 50 mm to 80 mm dia and 2 to 3 mtr long) without damages to the equipment/machinery including thrown away the same alteast 1 Km away from the Sub Stn Yard at Garbage dumping area outside the main gate complete all as specified and directed. Note: Suitable arrangement i.e ladder, scafolding or any other working platform required for climbing on high rise trees for carryout said work is the responsibility of vendor/contractor and the rates are deemed to be included in this quoted rate.
8
-
-
... More
M&L in replacement of Old GI earthing with New Chemical earthing with copper bond Copper pipe of dia 76 mm & 3 Mtr long including excavation in any type of soil starta. Filled with highly conductive compound. Composition of chemical filled in electrode water solubility, acid solubility with BFC Compound non toxic, non reactive, non explosive and non corrosive, longer life easy to maintain less space consistent results including earthing pit and chamber cover (as per sample) complete all as specified and directed at site.
6
-
-
... More
M&L for replacement of Old GI Strip with New Copper strip of size 32 x 6 mm as earth electrode for interconnection the various Eqpts/ Machinery/ Panel etc with earthing electrode including fixing on any type of wall with suitable size of GI Saddle/ clamps, nut, bolts and washers etc complete all as specified and directed.
100
-
-
... More
Cleaning carefully Electrical Cable Trench /Water Tubing Trench of Cooling Tower (approx size (30 x 1.5 x 1.0) Mtrs by removing mud, foreign material or other waste articles etc including pumpout the stagnated water with suitable size of pump/motor by taking proper electrical shutdown and thrown away atleast 1 Km from working site to garbage dumping area outside the main gate complete all as specified and directed.
2
-
-
... More
Supply only in replacement of Chargeable LED battery with backup of 30 mins with 2 x 6 watt LED light adjustable/ tilting type (as per sample) complete all as specified and directed.
6
-
-
... More
Supply only in replacement rubber pipe/ PVC Plastic Flexible pipe of One inch dia size and suitable for fuel filling/top up from Barrel to DG Set complete all as specified and directed.
25
-
-
... More
Supply only in replacement of AC/ DC Digital Clamp Meter cum Voltmeter, range up to 1000 Amps DC and 800 Amps AC complete all as specified and directed.
1
-
-
... More
Supply only in replacement Fibre Glass discharge rod for working pressure voltage upto 11 KV with 16 sqmm single core copper wire of length 15 Mtr complete all as specified and directed.
1
-
-
... More
Supply only in replacement of hand operated hydraulic type Crimping Pliers to crimp the end sealing Lugs/Ferrules of cable size upto 400 Sqmm single core including one set of all sizes crimping keys upto 400 Sqmm size complete all as specified and directed.
1
-
-
... More
S&F in replacement of Three phase Metal clad plug & socket DB 32 Amps 3P+E, 415 volts, suitable for 3 phase supply and fixing 4 pole MCB as per existing make & model complete all as specified and directed.
4
-
-
... More
S&F in replacement 2 X 2 panel light, colour : White/ Worm white, 3000/5700K, ultra modern, recess mounting type luminaire with high brightness, LED 36 Watt, suitable for armstrong/ grid ceiling, as light source including connection with flexible wire and all fixing accessories complete all as specified and as directed.
80
-
-
... More
S & F in replacement of high power LED 70W, die cast aluminium housing flood light suitable for highlighting architectural features and general purpose lighting complete all as specified and as directed.
15
-
-
... More
Supply and installation in replacement of 24 Volts, Automotive / Commercial Multi Battery Charger (C12/24), suitable /compatible to charge existing DG Set batteries complete all as specified and directed.
1
-
-
... More
Supply in replacement of Rubber Hand Gloves suitable for 11 KV Electric working pressure complete all as specified.
6
-
-
... More
Supply in replacement of Self supporting cum extendable Aluminium Ladder of 12 feet extendable upto 21 feet complete all as specified and directed.
1
-
-
... More
Visiting of service Engineer of authorised dealer to attend breakdown, inspection of 750 KVA DG Set with AMF Panel & Cooling tower rectify the fault with new required spare related to breakdown complete all as specified and directed at site. (DG set Cummins Make)
3
-
-
... More
All as per item 43 but 160 KVA DG Set with AMF Panel & Cooling tower. (DG set Cummins Make)
2
-
-
... More
S&F in replacement high power Flood Light, LED 100W , die cast aluminium, IP65 suitable for highlighting architectural features and general purpose lighting complete all as specified and as directed.
15
-
-
... More
Supply in replacement of Rubber / Gum Boot of size Large 8 No. suitable for working personnel and working pressure upto 11 kv Electric working pressure complete all as specified and as directed.
6
-
-
... More
Supply in replacement of Hammer /Hilty type Drilling & Chiselling Machine, Electric Operated, 1-ph, 720 watt, 230 V, RPM - 1500 capacity with Reverse /Forward operation including a set of all sizes of drill bits as per sample given complete all as specified and directed.
1
-
-
... More
Supply in replacement of Electric operated blower for air volume 2.7 cum/min, hand operated complete all as specified and directed.
1
-
-
... More
Supply and laying in replacement (laying in ducts /on Cable trays etc with new saddles & clamps etc as per site requirement) including testing & commissioning of 1100 Volts grade LT, multistranded AL Conductor, Electric Power Cable (Heavy Duty), XLPE insulated, galvanized steel strip or wire armored of size 300 Sqmm 3.5 Core complete all as specified and directed.
50
-
-
... More
S & F in replacement of Tap-Off Box Sheet Metal Enclosure of 2 mm thick CRCA Sheet with MCCB 4 Pole, 415 Volts, 160 Amp, 16 KA Breaking capacity with adjustable Thermal and adjustable Magnetic overload protection with Ics = 100% of Icu with extended rotary handle (ROH) mechanism, notifying ON/OFF/TRIP position of MCCB including suitable size of spreader links on both side and galvanised or chromium plated high tensile nuts, bolts and washers etc complete all as specified and directed. Make : Legrand cat Part No. 65285014P, EN-60439-1/2, IP 55.
2
-
-
... More
S & F in replacement of Tap-Off Box Sheet Metal Enclosure of 2 mm thick CRCA Sheet with MCCB 4 Pole, 415 Volts, 250 Amp, 25 KA Breaking capacity with adjustable Thermal and adjustable Magnetic overload protection with Ics = 100% of Icu with extended rotary handle (ROH) mechanism, notifying ON/OFF/TRIP position of MCCB including suitable size of spreader links on both side and galvanised or chromium plated high tensile nuts, bolts and washers etc complete all as specified and directed. Make : Legrand cat Part No. 65285014P, EN-60439-1/2, IP 55.
3
-
-
... More
S & F in replacement of on load changeover switch euroload type four pole rating capacity 1250 Amps, 415 Volts, 3-ph, 4 wire, AC, suitable to fixed in existing SS enclosure complete with accessories with cutting /welding etc including suitable size of nut bolts etc complete all as specified and directed.
1
-
-
... More
Supply and Laying in replacement of XLPE insulated, PVC inner sheathed, armoured with galvanised steel strip, heavy duty, LT underground cable ISI marked with Copper multistranded conductor 1100 volt grade of size 400 Sqmm Single Core laid in trenches / duct /MS angle rack etc, connecting and terminated with suitable size of Cu Lugs and nut-bolts and washers and testing etc complete all as specified & directed.
30
-
-
... More
M & L in replacement of GI steel tubing size 80 mm dia medium grade for connection from DG to cooling tower with all standard fitting, clamps, bolts nuts, flanges/socket, union and washer etc complete to wall and ceiling or laid in floor including any type of cutting & welding etc and re-fixing of existing accessories where necessary such as butterfly valves, check valves, Y strainer, POT strainer size 80 mm dia complete all as specified and directed.
50
-
-
... More
Supply, Laying, Fixing and testing in replacement of heavy duty MS pipe for Exhaust piping (wall thickness min 4 mm) of size 200 mm dia conforming to IS : 1239/3589 including fittings like elbows, tees, flanges, tapers, reducers, gaskets, nut-bolts etc including welding, cutting and grinding works, fixing in wall /roof RCC Ceiling complete and making good to the disturbed surface similar to existing and painting with two or more coats of synthetic enamel paint and including disconnected/ dismantling and taking out of rusty /damaged MS pipes complete all as specified and as directed.
30
-
-
... More
M & L in replacement of 22 SWG Aluminium sheet cladding for 200 mm dia MS pipe with 100 mm thick resin bonded rockwool insulation fixing with screws and good surface finishing complete all as specified and directed.
30
-
-
... More
S & F in replacement of Ball Valve of size 25 mm bore complete with rubber gaskets, GI Nut-bolts, washers etc complete all as specified and directed.
2
-
-
... More
S&F in replacement of Monoblock Pump Set of Capacity 3 HP, 3-Ph, 415 Volts, AC, 50 Hz including fixing /installation at existing place in HT Cable Trench/Main Electrical Panel trench etc including any type of modification required i.e. cutting welding and threading etc as per site requirement complete all as specified and directed.
2
-
-
... More
S & F in replacement of Wire mesh Cable Tray Hot Dipped Galvanized size 54mm (h) X 600 (w) mm, Trays should comply Standard EN ISO 14 61: at least 550 h of SST. The deflection of cable tray must be no more than 1/200th of the distance between two supports and tested in accordance with the standard IEC 61537, Wire cable trays must be designed with an optimum span of 1.5 m, taking into account the maximum carrying capacity authorised by the manufacturer including all standard wall mounting accessories e.g. SS Mounting Bracket (Horizontal & Vertical Both), bends, Fastners, kitastar, nut, bolts and washers etc at suitable intervals complete all as specified and directed. It shall be manufactured with a longitudinal 'T- welded' safety edge. Make- Legrand
20
-
-
... More
S & F in replacement of Non Return Butter Fly Valve of size 80 mm bore complete with rubber gaskets, GI Nut-bolts, washers etc complete all as specified and directed.
2
-
-
... More
M&L in replacement of MC Channel/ Angle Iron of suitable size for making supports for DG Exhaust pipe and fixing /grouted in any position through fabrication work including cut to shape and cutting / welding as required at site in Main Electrical sub Stn including two coat of anticorrosive black paint on complete MS structure on both side including grouted in beem / roof lintel with suitable size of GI Fastners/ Nut-bolts and washers etc in any position complete all as specified and directed at site by the Engr-in-Charge.
90
-
-
... More
M & L in replacement of GI steel tubing size 40 mm dia medium grade for connection from DG to cooling tower with all standard fitting, clamps, bolts nuts, flanges/socket, union and washer etc complete to wall and ceiling or laid in floor including any type of cutting & welding etc and re-fixing of existing accessories where necessary complete all as specified and directed.
90
-
-
... More
Supply and laying in replacement (laying in ducts /on Cable trays etc with new saddles & clamps etc as per site requirement) including testing & commissioning of 1100 Volts grade LT, multistranded AL Conductor, Electric Power Cable (Heavy Duty), XLPE insulated, galvanized steel strip or wire armored of size 95 Sqmm 3.5 Core complete all as specified and directed.
120
-
-
... More
S & F in replacement of 2.5 sqmm three core PVC round/flat sheathed flexible copper multistranded cable complete all as specified and as directed.
200
-
-
... More
All as per item ser No. 64 above but 4 sqmm three core.
100
-
-
... More
S & F in replacement of Gate Valve of size 40 mm bore complete with rubber gaskets, GI Nut-bolts, washers etc complete all as specified and directed.
2
-
-
... More
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.
250
-
-
... More
Taking down old UNSV recess/ surface type distribution board SP/SPN type from wall etc.
7
-
-
... More
Taking down old UNSV recess/ surface type distribution board TPN type from wall etc.
3
-
-
... More
M&L in replacement of point wiring for light/ fan for Modular Switches or normal switches with 2 x 1.5 sqmm, single core sheathed, FRLS, multistranded copper conductor PVC insulated cable 1100 Volts grade, drawn through concealed rigid non-metalic PVC conduit with all standard fittings of suitable size as required at site including cadmium plated screws as per IS and replacement of top modular cover plate/face plate cover, CI/GI sunken boxs/terminal boxes etc concealed in any type of wall including 1.5 sqmm size PVC insulated Copper earth continuity conductor and connected to common earth dolly for one light/fan point controlled by one switch 5 Amps one way single pole complete all as specified and directed.
100
-
-
... More
All as per item No. 70 above but one three pin 5 Amps socket out let on independent board.
50
-
-
... More
All as per item No. 70 above but one three pin 5 Amps socket out let on same board.
50
-
-
... More
All as per item No. 70 here-in-before but point wiring of Copper Conductor multistranded 2x2.5 Sqmm size for 3 pin 15 Amps socket outlet on indipendent board with 2.5 sqmm size of earth conductor complete all as specified and directed.
50
-
-
... More
S & F modular Switch Piano single Module 6 Amp, one way complete all as specified and directed.
20
-
-
... More
S&F Modular switch piano, single pole 16 amps one module complete all as specified and directed.
10
-
-
... More
S&F modular socket outlet 2-in-1, 3 pin, 6&16 Amp, two module complete all as specified and directed.
10
-
-
... More
S&F modular socket outlet 2-in-1, 3 pin, 6 Amp, two module, complete all as specified and directed.
10
-
-
... More
S&F modular step type fan regulator 120 watt, two module socket type, complete all as specified and directed.
10
-
-
... More
Supply and fixing modolar Bell push 6 Amp 230 volt, one module.
8
-
-
... More
Supply and fixing in replacemnt 16 Amp, 2-in-1 Socket complete all as specified and as directed.
10
-
-
... More
Supply and fixing in replacement of 16 Amp & 6 Amp,switch socket combined unit PVC box complete all as specified and as directed.
10
-
-
... More
S&F ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete.
50
-
-
... More
Supply in replacement step type fan regulator 100 watt, flush socket type, complete all as specified and directed.
8
-
-
... More
Supply in replacement of modular step type fan regulator 100 watt, switch type one module, complete all as specified and directed.
10
-
-
... More
Supply in replacement of modular step type fan regulator 120 watt, two module, complete all as specified and directed.
10
-
-
... More
Supply and fixing in replacement of modular 16 Amp switch & modular socked 6/16 Amp with combined unit box 3 module complete all as specified and as directed.
10
-
-
... More
Supply and fixing in replacement of modular 6 Amp, 2-in-1 Switch and Socket with Combined box 3 module complete all as specified and as directed.
10
-
-
... More
Supply and fixing in replacement of socket out let 2-in-1 pin 5 Amps complete all as specified and as directed.
30
-
-
... More
Supply and fixing in replacement of socket outlet 2-in-1, 3 pin, 5 and 15 Amps, flush type of 2 fixing holes complete all as specified and as directed.
30
-
-
... More
Supply and fixing in replacement of modular Switch, single Module 6 Amp complete all as specified and as directed.
50
-
-
... More
Supply and fixing in replacement of Modular switch, single module 16 Amps complete all as specified and as directed.
20
-
-
... More
Supply and fixing in replacement of modular socket outlet 2-in-1, 3 pin, 6&16 Amp, flush type complete all as specified.
30
-
-
... More
Supply and fixing in replacement of modular socket outlet 2-in-1, 3 pin, 6 Amp, flush type complete all as specified and as directed.
30
-
-
... More
Supply and fixing in replacement modular switch 6 Amp, 2 way 230 volt complete all as specified and as directed.
20
-
-
... More
Supply and fixing in replacement modular bell push 6 Amp,230 volts complete all as specified and as directed.
10
-
-
... More
Supply and fixing in replacement ding dong bell, AC, 230 volts, single pole complete.
10
-
-
... More
Supply and fixing in replacement of modular white cover with frame 12 modules (2x6 module) suitable for fixing of modular Switches/ sockets complete all as specified and directed.
20
-
-
... More
Supply and fixing in replacement of modular white cover plate with frame 8 modules (2x4 module) suitable for fixing of modular Switches/sockets, complete all as specified and directed.
20
-
-
... More
Supply and fixing in replacement of modular white cover plate and with frame 6 module suitable for fixing of modular Switches/sockets complete all as specified and directed.
20
-
-
... More
Supply and fixing in replacement of modular white plate and cover suitable for fixing of modular Switches/sockets, 3 modules complete all as specified and directed.
20
-
-
... More
Supply and fixing in replacement lamp holder, 230 volt AC, PVC / Polycarbonate type with back plate suitable for batten fitting complete all as specified & directed.
20
-
-
... More
Supply and fixing in replacement ceiling rose, 6 Amps, 250 volts, AC with three terminals and PVC / Polycarbonate insulated body of 50 x 25mm size complete.
20
-
-
... More
Supply and fixing in replacement of Metal clad plug top 20 Amp 2P+E, 240 volts Cat No-650028
6
-
-
... More
Supply and fixing in replacement of Metal clad Socket 20 Amp 2P+E, 240 volts Cat No-650023
6
-
-
... More
Supply and fixing in replacement of PVC box suitable for fixing of modular Switches/sockets of 3 modules complete all as specified and directed.
5
-
-
... More
Supply and fixing in replacement of premium quality Red/ Green 0.5 watt LED light 220/240 Volt complete all as specified and directed.
6
-
-
... More
All as per Srl item No 106 here-in-before but 2X 6Sqmm and 1X 6 Sq,mm for Earth wire.
20
-
-
... More
S&F MCB DB, single pole and neutral with 200 Amps rated bus bar, 230 volts, glazed, double door type, IP-43, including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following no of way:-
-
-
-
... More
4 way
1
-
-
... More
8 way
1
-
-
... More
12 way
1
-
-
... More
S&F loadline distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB 63/ 100 Amps as incomer and MCB SP as out going completeand making good disturbed surface all as directed.
1
-
-
... More
S&F distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable for MCB 63/100 Amps TPN as incomer and MCB SP as out going complete and making good disturbed surface all as directed.
1
-
-
... More
Supply and fixing DB VTPN 8 way IP 43 IK-09 with metal double door suitable for Provision of MCCB 125 Amp,housing MCB's complete and making good disturbed surface all as specified and as directed.
1
-
-
... More
Supply & Fixing in replacement of sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin earth plug and socket complete with one MCB SP 25Amp of capacity 20P+E Amps complete and making good disturbed surface all as specified and directed.
5
-
-
... More
Supply and fixing in replacement MCB DP/SPN, 240 Volts, AC of breaking capacity 10 KA, 'C' curve and connections by using suitable copper lugs complete of following rating:-
-
-
-
... More
63 Amps
2
-
-
... More
40 Amps
2
-
-
... More
S&F MCCB 4 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA with incoming and outgoing spreader extentions ang Aluminium lugs suitable for load line DB & connection complete of following rating:-
-
-
-
... More
125 Amps rating
1
-
-
... More
100 Amps rating
1
-
-
... More
M&L for earthing with Galvanised Steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using GI wire of size 4mm dia as earthing lead (upto the body of the equipment) by means of GI bolts, nuts, check nuts and washers and thimbles and protected by light grade 15 mm dia GI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel, wire mesh, RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil, returning, filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 5 of SSR 1991(Part-I) complete.
2
-
-
... More
S&F in repair of precast RCC earthing pit with CI cover ISI marked including angle iron frame made out of 35x35x4mm thick for supporting the edges of pit cover as dimension shown in Electrical plate No-2 of SSR part-I complete all as specified & directed.
6
-
-
... More
Supply and fixing in repair power saving BLDC type ceiling fan 1200 mm sweep,230 volts, 5 star rated, watt- 32 max, RPM- 370 , Air delivery- 220 cmm, with blades, down rod.
10
-
-
... More
Dismantling of unsv Ceiling Fan/ Exhaust Fan of any make/model/sweep for repair and refixing the same after repair.
57
-
-
... More
cutting and removing the old defective/burnt winding, cleaning the core of ceiling fan motor and rewinding the fan motor with super enamelled copper winding wire of same gauge with insulating material and varnishing the core assembly, drying the moisture content to get appropricate speed and re-assemble the same complete all as directed. (Note:- The cost of copper winding wire is deemed to be included in the quoted rate)
25
-
-
... More
All as per item No. 119 above but for exhaust fan upto 300mm sweep size
4
-
-
... More
All as per item No. 119 above but for exhaust fan of 380/450mm sweep size
4
-
-
... More
Supply and fifing in replacement of steel fan blade assebly suitable for Exhaust fan 300 mm sweep of any make
2
-
-
... More
Supply and fifing steel fan blade assembly suitable for Exhaust fan 380/450 mm sweep of any make
2
-
-
... More
S&F in replacement of repair wall mounting fan 400 mm sweep, adjustable, plastic blade grill for protection, pull cord control for speed and oscillation on-off, ABS body incl connection and old to be deposited in store yard complete all as directed.
2
-
-
... More
S&F in replacement of repair pedestal fan 500 mm sweep with strong copper wound motor for better air delievery, smooth oscillation, superior low voltage performance, heavy base for stability, 3 speed control regulator, speed not less than 1400 RPM and old to be deposited in store yard complete all as directed.
2
-
-
... More
Supply and fixing in replacement of heavy duty Exhaust fan 450 mm sweep, 230 volts, copper wound motor, 1300 to 1400 RPM with louvers and cutting , cheasing existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete.
1
-
-
... More
Supply and fixing in replacement of heavy duty Exhaust fan 380 mm sweep, 230 volts, copper wound motor, 1300 to 1400 RPM with louvers and cutting , cheasing existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete.
1
-
-
... More
Supply and fixing in replacement of heavy duty Exhaust fan 300 mm sweep, 230 volts, copper wound motor 1300 to 1400 RPM with louvers and cutting existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete.
2
-
-
... More
Supply and fixing in replacement of high speed Exhaust fan 225/230 mm sweep, 230 volts, copper wound motor 1300 to 1400 RPM with metal blade and guard and cutting existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete.
2
-
-
... More
Supply and fixing in replacement of Ventilating fan 250 mm sweep, 230 volts, 1300 to 1400 RPM with high quality engineering plastic body and cutting existing hole to fit properly and making good distrubed surface and electric connection with three core flexile cable 1.5 Sqmm complete.
2
-
-
... More
M&L for cleaning and painting to old steel surfaces of Desert cooler with two coats of synthetic enamel spray paint over one coat of red oxide on external surface & two coats of anti corrosive black paint inside the Body tank & side grills over a coat of Red Oxide primer including scraping/rubbing with wire brush on old surface of Desert cooler complete all as specified and directed by Engr-in-Charge.
5
-
-
... More
S&F in replacement Desert Cooler fan motor capacity 1/5 HP, 1400 RPM single phase with fan blade and stand complete.
5
-
-
... More
S&F in replacement selector switch with knob three speed suitable for fan motor complete.
5
-
-
... More
S&F in replacement PVC insulated and PVC sheathed cable copper conductor 3 core (superior quality) complete.
50
-
-
... More
S&F in replacement water lift pump plastic body of 220-240 Volts AC Supply single phase complete all as directed by Engr- in-Charge.
5
-
-
... More
S & F in repairs desert cooler body of size 60x55x65 cm made out of GI sheet & water storage tank of soze 65x55x20 cm deep made out of GI sheet including front grills & three side shutters duly fitted with wood pads 03 nos & duly spray painted with two coats of synthetic enamel paint over a coat of red oxide primer (inside & outside) all as directed by Engr-in-Charge.
4
-
-
... More
Supply & charging the gas refrigerant R-22/ R 410 A or as existing No to split type AC's of capacity 1.5/2 Ton capaity including removing of leakage if any and testing complete all as specified & directed.
8
-
-
... More
M&L for taking down of inverter type PCB and transporting it to authorized workshop for its repair complete along with necessary accessories like diodes, resistors, capacitors for PCB card suitable for AC's of capacity 1.5/ 2 Ton complete all as specified and as directed by Engr-in-Charge.
10
-
-
... More
M&L for replacement of inverter type PCB indoor or out door unit in existing make complete along with necessary accessories and suitable for package type AC's of capacity 1.5/ 2 Ton complete all as specified and as directed by Engr-in-Charge.
3
-
-
... More
M & L for servicing of Split type/window type AC of capacity 1.5 /2 TR of any by cleaning of filter on front side including fins, checking of refrigerant standing pressure, topping of refrigerant upto the required level, complete all as directed by Engineer-in-Charge. Note: Refrigerant required for topping (R22 /407a) shall be measured and paid for separately.
10
-
-
... More
Replacement of Blade for condensing fan motor of capacity 1.5 / 2.0 TR split type AC.
2
-
-
... More
Replacement of Condensing fan motor of capacity 1.5 / 2.0 TR split type AC.
2
-
-
... More
S&F in repairs blower fan motor split type AC of1.5/2.0TR capacity of make Carrier/ Hitachi/ Voltage/ Blue star, all as directed by Engr-in-Charge.
5
-
-
... More
S & F in repairs starting capacitor, for split type AC of capacity1.5/2.0TR. Complete all as directed.
3
-
-
... More
S&F in repairs Rotary type Compressor (Sealed Unit) of split type air conditioner of capacity 1.5/2.0 TR, Single phase220 volt of existing make necessary modification of foundation as required to suit the compressor, vacumisation, pressure testing, leakage rectification complete to taking down old unserviceable compressor the entire satisfaction of Engr-in-Charge.
3
-
-
... More
S&F in repairs scroll type Compressor (Sealed Unit) of water cooler40/80 ltr capacity single 220 volt of existing make including necessary modification of foundation as required to suit the compressor, vacumisation, pressure testing, leakage rectification testing complete to taking down old unserviceable compressor the entire satisfaction of Engr-in-Charge.
1
-
-
... More
Supply and filling of Refrigerant gas R 22/ R-134/ R-410(a) in company sealed cylinder of 10 kg capacity all as directed by Engr-in-Charge.
50
-
-
... More
S&F in repairs and replacement wall mounted indoor Voltage Stabilizer automatic operation single phase and designed for input variation between 170 V to 250 Volt with output voltage stabilized at 230 V with accuracy of +2.5% and of capacity 4 KVA.
10
-
-
... More
S & F in replacement of indoor unit 1.5 /2.0 TR capacity as per existing makes and sizes complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
S & F in repairs PCB Senser unit split AC indoor unit of Capacity 1.5 /2 TR suitable for , existing removing old PCB and refix with new PCB of same make & capacity and model in the same position complete all as directed by Engr-in-Charge.
6
-
-
... More
Supply and fixing of Floor/Wall Mounted Stands with accessories complete all as specified and directed.
20
-
-
... More
Supply and fixing of steel wirenet around outdoor unit for protection from monkey with accessories complete all as specified and directed.
20
-
-
... More
Taking out Split/Window type AC of 1.0/ 1.5/ 2.0 TR capacity, of any type/make, at site /wall, comprising of taking down carefully, removing power connections/ out door unit and refixing, testing and commissioning including suitable gas charging all as specified and as directed.
10
-
-
... More
M&L for servicising of Water Cooler of Capacity 40/80, 60/120,150/180 Ltrs and cleaning of cooling coil, condensing coil, air filters, compressors, fan motor etc with vacuum cleaner or cleaning solution complete all as specified and as directed by Engr-in-Charge.
3
-
-
... More
Supply and fixing in replacement of Starting relay with over load protector suitable for 40 to 150 Ltr capacity of water cooler.
3
-
-
... More
Supply and fixing in replacement of Self closing chromium plated self closing push taps for water cooler Capacity 40/80, 60/120, 150/180 Ltr.
3
-
-
... More
Taking out the existing unserviceable compressor of any make from water cooler storage type capacity 40 to 150 Ltrs from any location and supply installation & testing of new sealed unit compressor of similar capacity in same location alongwith test Certificate from manufacturer and cleaning of condenser by machine doing vaccum on the fully system and supply and charging of oil gas and other necessary lubricants including reconnecting the electric and water connections, transportaion & testing complete all as directed by Engr-in-Charge.
1
-
-
... More
Supplying and fixing in replacement of condenser fan motor 1/8 to 1/32 HP from water cooler cap.40 to 150 Ltr including the electric connections complete and testing complete all as directed by Engr-in-Charge.
3
-
-
... More
Supplying and fixing in replacement of evaporator/condensing coil of water cooler capacity upto 150 Ltrs as per existing size and pattern, and refixing in same position complete all as specified & as directed by Engr-in-Charge.
1
-
-
... More
Disconnecting from mains and taking down the unserviceable compressor unit of Refrigerator/Deep freezer of any make and type and providing New Compressor suitable for capacity upto 550 Ltr alongwith test certificate from manufacturer including filling of refrigrant gas and compressor oil complete all as directed by Engr-in-Charge. (Make :Tecumseh/LG/Godrej.)
Note:- The rates quoted by the contractor shall deemed to include the transportation cost from site of installation to contractor's repair workshop and back.
1
-
-
... More
Supply & fixing in replacement of evaporator coil/freezer coil made out of aluminium press type of capacity 165 to 550 ltr with freezer frame and door including connection, complete all as specified & as directed. (Make - Whirlpool/Godrej/Kelvinator/LG/Sumsung.)
1
-
-
... More
Supply and fixing in replacement of electronic voltage stabilizer input voltage 170-270 V and out put voltage 230 volts suitable for 1.5 Ton Window/Split type Air Conditioner. Make- V Guard/Microtek/Syspro/Patron/Candes
10
-
-
... More
Supply and fixing in replacement of voltage stabilizer input voltage 170-270 and out put voltage 230 volts suitable for 2 Ton Window/Split type Air Conditioner.
3
-
-
... More
Supply and fixing in replacement of electronic voltage stabilizer input voltage 170-270 and out put voltage 230 volts ,Capacity 4 KVA suitable for water cooler upto 150 LPH.
3
-
-
... More
M&L for servicing of window type AC of 1.0/1.5/2.0 TR capacity, of any type/make, at site/ wall, comprising of taking down carefully, removing power connections and front PVC grills, air filters, cleaning, washing, removing dirt, servicing including chemical wash of cooling coil, indoor cooling unit and condenser coil and providing oil and grease to all moving parts including condensing motor, checking and making electrical connection with thimble testing & commissioning including refixing at the original position and all as specified and as directed. Note:- The servicing of window type A.C will be carried out once in a period of three months for each A.C and each job will be measured for each A.C on three months basis. Two service will be measured as one job.
30
-
-
... More
M&L for servicing of split type AC of 1.5/ 2.0 TR capacity, of any type/make, at site /wall, removing front PVC grills, air filters, cleaning, washing, removing dirt, servicing including chemical wash of cooling coil, condenser coil oil and grease to all moving parts including condensing motor/Blower motor and testing complete all as specified and as directed. Note:- The servicing of split type A.C will be carried out once in a period of three months for each A.C and each job will be measured for each A.C on three months basis.Two service will be measured as one job.
137
-
-
... More
Supply and fixing in replacement of wall mounted heavy duty metal stand bracket set (set of 2 number) L type of size 17.5/19.5 inch for installation of outdoor unit of split AC 1.5/2 Ton.
10
-
-
... More
Supply and fixing in replacement of floor mounted AC stand made out of high quality metal material for installation of outdoor unit of split AC 1.5/2 Ton.
10
-
-
... More
M&L for replacement of blower motor copper wound of window /Split type air conditioner 1.5 /2 ton capacity with same rating 220/230 volt complete all as directed.
5
-
-
... More
M&L for replacement of blower motor blade of window type air conditioner 1.5 /2 ton capacity with existing size and type complete all as directed.
10
-
-
... More
M&L for replacement of blower wheel with existing size and type for window type AC 1.5/2 Ton capacity.
5
-
-
... More
M&L for replacement of blower of indoor unit of split AC 1.5 Ton/2Ton with existing size and pattern all as specified.
10
-
-
... More
Supplying and fixing in replacement of Tharmostat switch suitable for water cooler upto 150 Ltr /Refrigerato rand Deep Freezer upto 550 Ltr / Widow type AC and Split type AC upto 2 Ton capacity.
8
-
-
... More
M&L for replacement of room temerature senser suitable for window type/split type AC 1.5/2 Ton capacity
15
-
-
... More
M&L for replacemnt of sunction / discharge valve of split AC 1.5/2 Ton all as specified
4
-
-
... More
M&L for replacement of fan/Blower motor copper wount 220-240 volts of window / indoor unit of split air conditioner 1.5 /2 ton capacity/ water cooler//Fridge/Deep Frizeer with existing size and type complete all as directed.
4
-
-
... More
M&L for replacement of fan motor blade of outdoor unit of split type air conditioner 1.5 /2 ton capacity with existing size and type complete all as directed.
10
-
-
... More
M&L for replacement of swing blade/ flap set of indoore unit of split AC 1.5 Ton with existing type and pattern all as specified.
5
-
-
... More
M&L for replacement of capacitor 1 to 6 Mfd fan/blower motor of water cooler/AC/Fridge/Deep Frizeer all as spcified
10
-
-
... More
M&L for replacement of capillary copper tube pencil type for split AC 1.5/2 Ton/ Refrigerator and deep freezer upto 550 Ltr/Water cooler upto 150 Ltr all as spcified.
5
-
-
... More
M&L for replacement of polynet/PVC filter mesh copmplete set of split /window type AC 1.5/2 Ton with existing size and pattern all as specified.
10
-
-
... More
M&L for replacement of electronic remot device of split/Window type AC 1.5/2 Ton with existing make and pattern all as specified
10
-
-
... More
M&L for replacement of swing flap motor copper wound of split AC 1.5/2 Ton with existing size and pattern complete all as specified
5
-
-
... More
M&L for replacement front grillof window type AC 1.5/ 2 Ton capacity with existing make and patternall as specified
4
-
-
... More
M&L for replacement heavy duty Copper drier filter for Split and window AC upto 2 Ton/ Water cooler upto 150 Ltr / Refrigerator and Defreezer upto 550 Ltr
15
-
-
... More
Supply, fixing installation & testing in replacement of new sealed unit compressor of window upto 2 Ton capacity with similar size and pattern in along with test Certificate from manufacturer and cleaning of condenser by machine doing vaccum on the fully system and supply and charging of oil and gas and other necessary lubricants including reconnecting the electric connections, transportaion & testing complete all as directed by Engr-in-Charge.
4
-
-
... More
M&L for charging of refrigerant R-22 / R-410/R-407/R-134a or any other recommended refrigerant gas in 1.5/2 Ton window/split Air conditioner/ Refrigeratorof capacity upto 550 Ltr/ Deep Freezer of capacity upto 550 Ltr/ Water Cooler of capacity upto 150 Ltr including detecting leakage and rectify the leakage with proper brazing and testing on full load complete.
80
-
-
... More
S&F in repair starting/running capacitor 15 to 50 MFD, 240 volt suitable for water cooler/window AC /split AC including connection complete.
25
-
-
... More
S&F in repair starting relay suitable for air conditioner 1.5/2 Ton/ Deep Freezer and Refrigerator any cap complete.
25
-
-
... More
S&F in repair magnetic contactor, 30 Amp to FL 40 Amp, single pole, 208-240 V AC, 50/60 Hz for split/ window air conditioner incl connection complete all as specified & directed.
13
-
-
... More
M&L for powder coating paint on water cooler upto 150 Ltr/ refrigerator & Deep freezer upto 550 ltr capacity including minor denting and welding as required complete.
3
-
-
... More
M&L in repair copper tubing 1/2" dia with existing gauge for suction/discharge line of split air conditioner of 1.5 Ton/2Ton capacity including high quality puf insulation complete.
50
-
-
... More
All as per item No 192 above item but size 3/8" dia
50
-
-
... More
M&L for replacement of black rubber heat isulation sleeve 3.2 mm wall thickness for sunction and discharge copper tubing of split type Air Conditioner 1.5/ 2 TR.
50
-
-
... More
S&F in replacement hermetically sealed rotary type compressor unit of capacity 1.5/ 2 Ton for split type AC and charging of adequate quantity of refrigerant gas and oil with testing complete.
4
-
-
... More
S&F in repair Power Circuit Board (PCB) suitable for split/ window type AC of capacity 1.5TR / 2.0 TR with all standard features i.e. power on-off, fan cooling speed, timer, temp etc complete of existing make and type all as directed.
6
-
-
... More
S&F in repair copper condenser /cooling coil unit of split type AC 1.5/2 ton of any make complete all as directed (Charging of refrigerant will be measured and paid separately).
5
-
-
... More
S&F 6mm thick plywood sheet (ISI marked), waterproof fixed in window of required size including cutting for passing air of desert cooler complete all as directed.
1.4
-
-
... More
M&L in replacement of condensing cooling fan motor 54 watt, 220-240 volts for outdoor unit of Split AC 1.5/2 Ton, single phase with copper winding all as specified and directed.
4
-
-
... More
Supply and fixing in replacement of PVC flexible drain Hose pipe 15 mm dia with clamp.
100
-
-
... More
Supply and fixing in replacement of PVC flexible drain Hose pipe 40 mm dia with clamp.
100
-
-
... More
S&F in repair direct on line starter 415 volt, 50 Hz with voltmeter, Ammeter, relay, timer and single phase preventor complete for following pump set capacity (Make -L&T/BCH):-
-
-
-
... More
3 to 5 HP Pump Set
1
-
-
... More
7.5 HP Pump Set
1
-
-
... More
Supply and fixing in repair heavy duty cast brass foot valve screw type 50 mm dia, pressure 250 PSI complete.
2
-
-
... More
Suppy only liquid chlorine suitable for water treatment by mannual methed HDPF in 50 litre drum (Make : Davis Chemical/ Prothamesh Trading/ Aditya Birla) (Note:- Fresh lot of liquid chlorine shall be supplied with in 45 Days from the date of manufacturing as per monthy demand or as directed.
200
-
-
... More
Supply only bleaching powder Calcium Hypochloride minimum 32% cholorine as per IS-1065:1989 in 25 Kg Bag (Make : Raj/Cambal/DCM/Aditya Birla/Rajendra chemical/RS dye/Kalyani/Guru Kirpa Traders) (Note:- Fresh lot of bleaching powder shall be supplied with in 45 Days from date of manufacturing as per monthy demand or as directed).
30
-
-
... More
Cleaning of underground/semi underground sump by taking out all sludge, silt from bottom and cleaning all inside walls with wire brush and brooming the walls and top ceiling/roof including washing the walls with fresh water mixed with bleaching powder and draining out complete sludge, silt etc from bottom of the sump and applying one coat of lime wash for the UG sump of capacity upto 25,000 gallons complete all as directed.
2
-
-
... More
Supply and fixing in replacement of DOL pump starter upto 5 to 10HP 7.5 KW 240V relay range 13.2 to 20 A complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
M&L for replacement of steel shaft of centrifugal pump 5 to 10 HP including dismantling, opening and refixing the same on its original location all as specified and directed.
1
-
-
... More
Material & Labour for replacement of self priming mono block pump with motor 1 HP with in-built thermal overload protector complete all as specified & installation in repair of centrifugal pump having discharge not less than 80 Ltr per minute, Head-not less than 10 mtr m,1400/1500, single phase, 230 volt including all connection and testing complete all as specified & directed.
1
-
-
... More
S&F in repair of good quality tyre rubber coupling suitable for 5 to 10 HP pump set.
1
-
-
... More
Dismanlting and disconnection from motor and water connection of the pump and transport to work shop & opening carefully and servicing complete with replacing of bushes, gland packing, ball bearing, rubber gasket, nut and bolt and re-fixing it in original position and making out all electrical and water connection incl painting to two coats with synthetic enamell paint after necessary prepartion incl testing & commissioning complete for 7.5 to 10 HP capacity. (Note:- Replacement of impellor rewinding of motor shall be measured and paid separately)
1
-
-
... More
Taking out submersible pump set 3 to 10 HP including column pipe and electric cable from borewell (depth upto 50 mtr) complete by chainpully or other method and lowering the same in existing borewell after repair work all as specified. Note: The rate of T&P shall be included in quoted rate.
2
-
-
... More
Dismanlting and disconnection from motor and water connection of submersible pump and transport to work shop & opening carefully and servicing complete with replacing of unsv parts such as bushes/ ball bearing, rubber gasket,stop ring,washer shaft sleeve,stop plate nut and bolt and re-fixing it in original position and making out all electrical and water connection incl painting to two coats with synthetic enamell paint after necessary prepartion incl testing & commissioning complete for 3 to 10 HP capacity. (Note:- Replacement of impellor/ shaft and rewinding of motor shall be measured and paid separately) for 3 to 10 HP capacity.
2
-
-
... More
Dismanlting and disconnection from sumersible pump and electric connection of submersible motor and transport to work shop & Material & Labour for rewinding of submersible motor with PVC insulated copper winding wire of existing gauge and size to get original/proper speed and testing including reassebling of motor with submersible pump complete for following capacity:-
-
-
-
... More
3 to 10 HP
1
-
-
... More
11 to 20 HP
1
-
-
... More
Material & Labour for spray painting of complete water pumpset of cap 3 to 25 HP with two coats of synthetic enamelled paint of specified colour after preparation of surface.
5
-
-
... More
Supply ony handy medi kit first aid plastic box having medicine/ first aid items as first Aid Leaflet, Scissor S.S, Savion 50 ml, Cotton, Bandaid (Adhesive strip), thermometer, Burn Ointment, Nitrofurazone Creame U.S.P/Neomycin, Cotton Crepe Bandage. Paracetamole Tab. I.P, Merbromin Solution (20 ml), Sterile Guage swab (5cmx5cmx12 ply), Paper Adhesive Tape, Rolled Guage(6cmx2.5mtr), Rolled Guage (7.5cmx2.5mtr), Eye wash cup (plastic), Measuring cup(plastic), Disposable Glove, Dropper Plastic, Set of safety pine, Triangular Bandage, Blade.
2
-
-
... More
Material & Labour for painting of water supply pipes networks of 80/200 mm dia consisting of valves any type/ size at various pump houses inlcuding duly scrapping thoroughly the existing corroded paint / dirt/ dust/ rust and preparing the surface and applying two coats of synthetic enamel paint over a coat of red oxide primer as per the colour code and marking the water flow directions on pipe lines as directed.
50
-
-
... More
Collecting water sample in clean bottle from borewell/ UG sump/service tank and getting Chemical, Boilogical, Potability Testing of water sample (as per IS 10500:2012) at Govt recognised/ approved institute/ Lab for potability and chemical analysis complete all as specified & directed.
11
-
-
... More
Attending breakdown/ inspection of 3000 LPH Capacity RO Plant (Make: Eukawa) by Sevice Engineer of OEM to check the serviceability and repalcement of any parts related to breakdown complete all as specified and directed.
Note: (a) Spares for replacement shall be measured and paid separately.
(b) A sum of Rs. 500/- will be recovered in case of not attending breakdown by service engineer within 24 hrs.
11
-
-
... More
Supply only in replacement of Big blue spun candle 20'' as per existing make & model complete all as specified and direced.
10
-
-
... More
Supply only antiscalent chemical as per existing make complete all as specified and directed.
10
-
-
... More
Supply only in replacement of multimedia sand as per existing make complete all as specified and directed.
100
-
-
... More
Supply only in replacement of activated carbon as per existing make complete all as specifed and directed.
100
-
-
... More
Material & Labour for preparing the surfaces of sizes 600x450 mm of wall of pump house/OH/UG Sump and applying one coat of synthetic enamel paint (Bule/ Black) and written on it in white paint as 'Date of cleaning, Due date of cleaning, capacity of pump etc of letter not less than 35 mm height complete all as direceted.
8
-
-
... More
Material & Labour for painting of existing Steel/RCC surface with one coat of Black/Blue colour synthetic enamelled paint including preparation of surfaces complete.
2
-
-
... More
Material & Labour for writing letters or figures (Block, Roman, Italic or Indian) n exc. 30 cm high with synthetic enamel paint on existing steel/ RCC wall surface with synthetic enamelled paint complete.
30
-
-
... More
S&F in repair battery brass terminal heavy duty (as per sample).
4
-
-
... More
Taking up submersible pump set upto 3 to 10 HP with MS/ GI column pipe from borewell and lowering the same after repairing with electric connection complete all as directed.
2
-
-
... More
Material & Labour for cutting of road/path (width-25 cm x 40 cm) for laying of pipe line and making good to disturbed road/path including provision of PCC 1:2:4 type B-1 using 20 mm graded stone aggregate all as specified.
10
-
-
... More
Supply only high range Chlorine Test Kit with coloured sample complete with all testing fitment and OT solution in plastic finish box complete.
2
-
-
... More
Supply only Total Hardness Test Kit (5-1000 Mg/L) with coloured sample with all testing fitment and OT solution in plastic finish box complete.
2
-
-
... More
Supply ony handy medi kit first aid plastic box having medicine/ first aid items as first Aid Leaflet, Scissor S.S, Savion 50 ml, Cotton, Bandaid (Adhesive strip), thermometer, Burn Ointment, Nitrofurazone Creame U.S.P/ Neomycin, Cotton Crepe Bandage. Paracetamole Tab. I.P, Merbromin Solution (20 ml), Sterile Guage swab (5cmx5cmx12 ply), Paper Adhesive Tape, Rolled Guage (6cmx2.5mtr), Rolled Guage (7.5cmx2.5mtr), Eye wash cup (plastic), Measuring cup (plastic), Disposable Glove, Dropper Plastic, Set of safety pine, Triangular Bandage, Blade.
3
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements