Military Engineer Services Tender

M&L rendering 15mm thick in Cement Mortar 1:4 on fair faces of brick or concrete, external surfaces of walls finished and even & fair complete all as specifed & as directed.

M & L for preparing the newly plastered wall surface and applying two coat of cement base paint over one coat of cement primer complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 white cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified (Paymentfor providing grooves shall be made separately).

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge .

Dismantling of Stone slabs and tiles of any description or thickness laid bedded and pointed in any mortar in floor, aprons etc and including disposal of all debris exc 1.5 KMtr not exc 5 Km.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L for 100mm PCC type D -2 (1:4:8) using 40 mm graded crushed stone aggregate as in Sub base complete all as specified and directed.

M&L for 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete incl dismantling of old existing tiles all as specified and directed.

M&L for heavy duty coloured (approved colour) fully vitrified paving tiles of size 400mmx400mmx11 to 12mm thick, set and jointed in neat cement slurry and pointed in coloured or white cement to match the shade of tiles over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

M&L 75 mm thick PCC 1:3:6, type C1, using (20mm graded aggregate) as in Plinth protection and finished the surface fair & even without using extra cement, laid in panel , including filling the joints with sand mixed with bitumen in 1:1 ration complete all as specified and directed.

S&Fin repair Kerb stone of 300x300x 100mm thick precasted plain cement concrete type B0 , 1:2:4 , using 12.5mm graded crushed stone aggregate incl earth work for laying kerb stones.

S&F in repair precast cement concrete louvres and jallies 25 mm thick type B0 1:2:4, set in CM 1:6 (mea sured solid), including all mould- ings cmplete all as specified and directed..

M&L for PCC (1:3:6) type C-2 (40 mm graded aggregate) as in drain/Channal and mass concrete complete including necessary form wk all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M & L for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks ,Chajja and similar work conforming to Fe.290.Gde-E-165

M&L for cement concrete type B1 1:2:4 using 20mm graded stone aggregate as in coping, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates complete all as specified and directed..

M&L for two coats of synthetic enamel paint over a coat of Red oxide primer on new Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

M&L for One coats of synthetic enamel paint on old Steel Surfaces width or girth exc 10cm including preperation of surfaces complete all as specified and directed.

Dismantling of PVC pipe & fitting of any description & position up to 100 mm dia complete all as specified & directed.

PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to walls

S&F PVC (SWR) 75 mm bore pipe single socketed, in any length with rubber ring jointes , laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) 110 bore pipe single socketed, in any length with rubber ring jointes , laid in trenches or in floor complete all as specified and directed.

S&F PVC (SWR) 110 bore pipe single socketed, in any length with rubber ring jointes ,fixed to wall complete all as specified and directed.

S&F PVC (SWR) floor trap 75 mm dia, plain with grating including jointing with solvent cement complete

S & F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement

S&F 75mm bore PVC (SWR) vent cowl

S&F 110 x 75 mm PVC (SWR) reducers

S & F SS clamps heavy duty of 20 mmx 2 mm thick fixed by 8mm fastener for fixing PVC Pipe of 75 mm bore to wall or roof copletet all as specified and directed.

S & F SS clamps heavy duty of 20 mmx 2 mm thick fixed by 8mm fastener for fixing PVC Pipe of 100 mm bore to wall or roof copletet all as specified and directed.

S&F 110 mm PVC (SWR) junction single, (Single T) equal or unequal with access door.

S&F 75mm PVC (SWR) junction single, (Single T) equal or unequal with acces door.

S&F 110 mm bore PVC (SWR) bends any radius

S&F 75 mm bore PVC (SWR) bends any radius

Dismantling post or struts embedded in natural ground/concrete, brick work, masonry etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete

Excavating in trenches, n exc 1.5m wide and n exc 1.5m depth; for foundation, etc or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5m in depth getting out in any type of soil

All as per item No above here-in-before but depth exc 1.5m and n exc 3 m depth getting out in any type of soil.

Returing and filling in, including spreading levelling, watering and well ramming in layers n exc 25cm thick in excavated soil

Removing excavated soil to a distance exc 250m and depositing where directed at a level n exc 500m and depositing where directed.

Demolition and breaking up drain pipes (Salt glazed stoneware)/pvc set in cement mortar 150 mm internal dia of pipe complete all as specified and directed.

All as per srl item No.42 here-in-before but 200 mm internal dia of pipe.

M&L for 150mm nominal size (DWCPE) Double wall corrugated poly ethylene pipe SN8 including all fixing accessories of fittings like socket/spigot joint with elastomeric sealing ring, rubberring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

M&L for 200mm nominal size (DWCPE) Double wall corrugated poly ethylene pipe SN8 including all fixing accessories of fittings like socket/spigot joint with elastomeric sealing ring, rubberring, SILAID rubber lubricants required for laying of pipes, laid in trenches, complete all as specified and as directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and against the sides of pipes after they are laid and tested in bores of pipe150mm dia complete all as specified and directed.

M&L cement mortar concrete bed to drain pipes in PCC 1:3:6 type C-2 (using 40 mm graded crushed stone agg) incl packing under and against the sides of pipes after they are laid and tested in bores of pipe 200mm dia complete all as specified and directed.

S& F in repair 75mm thick factory made PFRC manhole/ drain covers of approved shape & size complete all as specified and as directed. Make : Polycrete or equivalent.

M&L preparation of old Steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for cleaning of manholes/Septic tanks/soakage pits/etc of any size and depth by hydraulic operated high pressure suction sewer cleaning machine having suitable tank cap incl skilled driver operator & labour and removal of sludge / silt / liquid / mud in foul position and disposing the same out side MD premises complete all as specified and directed. (Note : Maximum of 60 to 80 CUM or No of trip 20 Nos will be cleaned in a single working day by the Septic tank cleaning tanker machine. This item must be executed on each Saturday).

M&L for cleaning of chocked sewar line of dia 100 mm to 300 mm at any depth by hydraulic operated high pressure suction cum jetting sewer cleaning machine having jetting tank capacity of 3000 ltrs and 260 LPM with min 145 bar, suction flow of 10200 LPM incl skilled driver & operator supervising Engineer for cleaning of chocked sewer line including providing water for jetting and removal of sludge/silt/liquid / mud and sand (in foul position) etc out side the MD Premises all as specified and as directed. (Note : Maximum of 750 RM will be cleaned in a single working day by the Jetting machine, The cleaned sewage line shall be maintained and keep fully functional by removing any type of blockage, For any damage/casualty occure during working in sewer line or MH or at Other work shall be the responsibility of the contractor and the contractor shall take measures for working in sewer work and water will be provided by contractor. This item must be executed on each Saturday)

Dismantling fencing wiremesh any type in any position complete all as spd & directed.

Excavation in post hole (similar hole) each n exc 0.5 Cum getting out, returning filling and ramming earth or brocken rubble mixed with earth around in layer not exc 25 CM watering and removing surplus soil to a distance n exc 50 M and making good surface complete all as specifide and directed.

S&F mild steel joist channel angle for posts and struts in fencing, gate including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0

Plain Cement Concrete Type C1 (1:3:6) (using 40 mm graded stone aggregate)in foundation filling and mass concrete complete all as specified and directed.

Mild steel screw bolts 10 mm dia and over (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long

Supply only Chain link MS galvanised fencing Weight Not exc 4.00 Kg/Sqm, of any type.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete

Attending day to day complaint of different type sewage work such as blockage of WHB, WC, urinals, Sink, Bottle trap, Floor trap, Nahani trap, 'P' or 'S' traps of WCs, gully trap, vertical CI/SWR pipes of any dia including juction holes of any description of various units area, Single living Accn, JCOs ORs Md Accn, Offrs Md Accn and any other Accn of AGE B/R, BHDC area, repairing of CI/SWR pipes joints (lead / cement / adhesive joints), cleaning of sewage line, manholes of anynsize and depth and making it fully functional and removal of sludge / mud out side of Cantt area, excluding sunday and holiday by employing manpower, to entire satisfaction of Engr-in-charge complete all as specified and directed. Note for item No 59: (i) The rates quoted in the above item includes cost of T & P & petty materials for clearing of any type of blockage etc complete. (ii) Adequate tradesman /supporting manpower shall be deployed by contractor and they shall be present on all working days including Saturdays and holidays from 0930 hrs to 1800 hrs for maintenance of above mentioned work. The supervisor /site engineer of the contractor shall be forwarded detailed insturctions by concerned AGE/JE every morning for attending complaints on daily basis. The persons shall be detailed by AGE concerned every morning for attending complaints on daily basis. (iii) The material required will be paid seprately under respective item of this BOQ supply only. (iv) The complaints shall be attended on the day the complaint received before 1300 hrs. The complaints received after 1400 hrs will be attended on the other day before 1300 hrs. If complaints are not attended as per schedule a penalty of Rs. 500/- shall be imposed on contractor for each complaint for each day. (v) Any delay in non-completion of complaints will be immediately communicated to AGE/JE. (vi) Complaint register & complaints slips shall be maintained by the contractor rep. After completion of complaint the rep of contractor shall obtained feedback and signature of user. Payment against these items shall be made after due verification of complaint register & complaint slips by JE & Engineer-in-Charge.

Demucking old surface channels/drains of depth up to 0.45m and any section or width including removing/refixing drain cover of any shape and size and spreading the muck in road side berms as directed .(Note : cost of dumucking includes for foul smell also)

Providing and injecting chemical emulsion for Post construction antitermite treatment along external wall below concrete or masonry apron using chemical emulsion @2.25 litres per linear metre including drilling and plugging holes etc in apron complete all as per direction of Engr-in-Charge