Military Engineer Services Tender
If you're typing tender ID over and again or finding it difficult to go through the cumbersome government websites for looking at Delhi tenders online. We have come up with a solution i.e. we have collated every eprocurement Delhi tender on BidAssist. Also, for any queries related to an e-tender Delhi, like the bidding process, registration process, etc., the same are explained below.
Costs
EMD
₹ 99,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_681633_1Tender No
GE/DE-73/2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
COMPREHENSIVE MAINT INCLUDING DAY TO DAY B/R MAINT, JOINERY, PLUMBING, KITCHEN CUPBOARD, TILING WORK, COMMON AREA PAINTING TO MD OFFRS ACCN AT MANEKSHAW MARG, URBAN VILLAGE, CASSEL ROAD IN THE AOR OF AGE B/R-I UNDER GE (EAST) DELHI CANTT-10
BOQ Items
Taking down shutters of any description exceeding 2.00 Sqm each complete all specified and directed.
15
-
-
Refixing doors shutters in same opening any description n exc 2.0 sqm. complete all specified and directed.
20
-
-
Refixing doors shutters in same opening any description exc 2.0 sqm. complete all specified and directed.
20
-
-
Taking down chowkats or frames (any type) exc. 1.5 Sqm but n. exc 4 sqm each complete all as specified and directed.
20
-
-
Dismantling steel work including doors, gates etc., complete all as specified & directed.
1
-
-
S & F framed work such as in door frame, door shutters / gate of angel or other section with gusset plates, rails, braces, etc complete , drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hings or steel hanging door fittings, including hings hold fast of Fe 410-W (Gde E-250 quality) etc complete all as specified.
300
-
-
S & F 1.25 mm thick Pressed steel frames size 105 mm x 60 mm for doors with one rebates including necessary fixing lugs/ hold fasts with PCC in walls/RCC etc , 3 or 4 No's heavy MS hinges , lock strike plate, etc and including back filling with PCC in 1:3:6 (using 12.50 mm graded stone aggregate) completed all as specified & directed
100
-
-
S & F 1.25 mm thick Pressed steel frames size 125 mm x 60 mm for doors with double rebates including necessary fixing lugs/ hold fasts with PCC in walls/RCC etc , 6 or 8 No's heavy MS hinges , lock strike plate, etc and including back filling with PCC in 1:3:6 (using 12.50 mm graded stone aggregate) completed all as specified & directed
50
-
-
S&F flush door shutter 35 mm thick solid core construction with Block board and plywood face panels, commercial type on both sides. complete all as specified and as directed.
20
-
-
S&F 35 mm thick second class hard wood glazed and skelton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part -I section 8 clause 8.24 (a) supplied and fitted to chowkats
20
-
-
S&F Plain framed panelled shutters of second class hard wood 35mm thick (any number of panels) with lock rails and panels of 9mm thick BWP commercial ply or 12mm veneered parcticle board with commercial veneering on both faces. The size of rails and stile as per IS:1003, complete all as specified and as directed.
20
-
-
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
25
-
-
S & F Factory made solid panel PVC door/cup board shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement or stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, suippling and fixing in the frame at site as per specification in SSR Part-I. complete all as specified and directed by Engr-in-Charge..
25
-
-
Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.90 sqm.)comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass/ wire mess shall be paid separately). (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)
5
-
-
Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.90 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVCextruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass/ wire mess shall be paid separately)
Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
8
-
-
Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.5 m height made of (big series) frame 112 x 52 mm & sash 42 x 66 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window upto 2.00 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.20 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh hall be paid separately).
(Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)
20
-
-
Supply and fixing factory made uPVC white colour Three track three panels sliding door with fly proof S.S. wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 112 x 52 mm & sash 42 x 86 mm both having wall thickness of 2.3+ 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 6.00 sqm) comprising of uPVC chambered frame, with in-built roller track and sash extruded profiles duly reinforced with 1.20 + 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension uPVC extruded glazing beads, uPVC extruded interlock and uPVC extruded Inline sash adaptor (if required), EPDM gasket, wool pile, zinc alloy (white powder coated) handle with key on one side of extreme panels along with zinc plated mild steel multi point locking having transmission gear with keeps, zinc alloy (white powder coated) cresent lock (if required). stainless steel (SS 304 grade) body with adjustable double nylon rollers (weight bearing capacity to be 120 kg), G.I fastener 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) (Note: The unit rate quoted by contractor include all other connected accessories. Net Opening will be measured lor payment purpose and for uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.)
20
-
-
S & F Anodised aluminium frame for doors, windows, ventilators, partations, AC provision window frame with or without three track, three track window frame etc with Powder Coating (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified (Note : Design and pattern for any type window/door/ventilator etc frame as required as approved by GE )
300
-
-
S & F Anodised aluminium door shutters, powder coating of any colour, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified (Note : Glass / wiremesh/ partical board/ ACP board etc any type paid separately)
30
-
-
S & F Anodised aluminium window and ventilator shutters, powder coating of any colour, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified (Note : Glass / wiremesh etc any type paid separately)
10
-
-
M&L Aluminium alloy powder coated windows Three track three panels sliding window with fly proof S.S wire mesh shutter (Two nos. glazed & one no. wire mesh panels) including aluminum powder coated frames sliding track, bottom , sides and top weight not less than 0.75 Kg/ RM, double revated and 0.40 Kg/RM for window shutter sliding type with aluminium sections as per series - B (18mm) 3 track of Jindal section and equivalent in others, numbers for sliding windwos with framed shutter including aluminium allow powder coated snap type beads handles with locking arrangement spring action and glazing clip joint cleats rubber gaskets etc including all standard fittings, complete all as specified and as directed. (Note : Glass / wiremesh etc any type paid separately)
55
-
-
S & F 3/4 mm thick aluminium composite panel sheet colour matching with aluminium door and frame fixed with aluminium partations, door, cupboard etc complete all as specified and as directed. .
20
-
-
M & L with fabrication & fixing to 18/19 mm thick prelaminated particle board, exterior grade, prelaminated both side with decorative choice laminations , fixed with SS screws to hinges and timber/steel frame work for kitchen cupboards , shelves, including tape on edge's & including frame work etc including taking down old any type cupboards , shelves etc all as specified and directed.
100
-
-
M & L with fabrication & fixing to horizontal & vertical shelves/ partations /sides/ top/ bottom/back sides etc for Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards with white laminated colour on both sides, of approved quality including paste to all exposed edge by edge Banding Tape including provision of cabinet for keeping baskets/ drawers etc and including taking down old any type cupboards , shelves etc all as specified and directed. (Design and pattern as approved by GE). (Make :Action tesa or equivalent)
180
-
-
M & L with Fabrication & fixing to front side /all exposed sides of Modular kitchen cabinate/ wardrobe/ cupboard/drawers made out of 17/18 mm thick HDHMR boards with glossy/maat colour laminate sheet on front face and all exoposed sides and white laminate on other face of approved quality and including paste to all exposed edge by edge Banding Tape and including provision of cabinet for keeping baskets/ drawers etc & modular handle less , including aluminium G/C/J profile handls and stainless steel handle for front face as required and etc and including taking down old any type cupboards , shelves etc all as specified and directed. (Design and pattern as approved by GE). (Make :Action tesa or equivalent)
60
-
-
S & F for soft closure hinges with all fittings at mounting plate of premium quality, fixed in door/cup board shutters complete all as specified and as directed (Make : - Godrej/Hettich/IPSA)
50
-
-
S&F 18 inch (45 CM) telescopic Drawer Channel channels, rollers for smooth sliding of drawers modular kitchen etc complete all as specified and directed (Make : - Godrej/Hettich/IPSA)
15
-
-
S&F 20 inch (50 CM) telescopic Drawer Channel channels, rollers for smooth sliding of drawers modular kitchen etc complete all as specified and directed (Make : - Godrej/Hettich/IPSA)
15
-
-
S&F mild steel butt hinges medium weight cold rolled of size 100 mm and fixed to shutters. complete all as specified and as directed.
75
-
-
S & F for Fancy type Stainless steel bright polished handles oval type of size 150mm size, complete all as specified and as directed.
60
-
-
S & F in repair 250 mm long Stainless steel bright polished sliding door bolts, plate type, stove with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed to door complete all as specified and as directed
20
-
-
S & F 150 mm size Stainless steel bright polished barrel tower bolts,for doors with bright bolt
60
-
-
S & F 100mm size butt hinges stainless steel complete all as specified and as directed.
30
-
-
S & F 150 mm size aluminium anodised, handles cast type anodised complete all as specified and directed
20
-
-
S & F 150 mm size aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed.
20
-
-
S&F in repair 300 mm size mild steel ordinary rat & tail rod pattern spring (Helical) including rollar & rollar plate fixed to wooden / MS frame complete all specified and directed.
20
-
-
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised of 30 mm width complele all as specified and as directed.
50
-
-
Supply only Stainless steel basket (Perforated Cutlery Basket SS) of size 445mm x 485mm x 100mm made with suitable arrangement for fixing over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat art No 3575 or equivalent in IPSA/Hettich as approved by Engr-in-Charge).
10
-
-
Supply only for Stainless steel thali/plate basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire of approved quality with suitable arrangement for fixing over telescopic channel 18 inches/20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 3441or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).
10
-
-
Supply only Stainless steel plain basket of size 445mm x 485mm x 200 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 3892, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).
10
-
-
Supply only Stainless steel two shelf pullout basket of size 150 mm x 450mm x 430 mm made of min 4mmdia stainless steel wire and bottom of S S perforated sheet approved quality with suitable arrangement for fixing over telescopic channel 18 inches/ 20 inches in length two way extruded MS galvanised over rollers as approved by Engr-in-Charge. (Make: Godrej Cat part No 2260, or equivalent in IPSA/ Hettich as approved by Engr-in-Charge).
10
-
-
Hacking out old broken glass from wooden frames and steel frame or stone, concrete or brick surrounds , glazed with putty or fixed with beads.
100
-
-
S & F 3 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.
150
-
-
S & F 3 mm thick figured glass , pin head type and glazed with oil putty in square n. exc 0.5 Sqm in each pane fixed complete all as specified and directed.
20
-
-
S & F 5 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 1 Sqm in each pane fixed complete all as specified and directed.
12
-
-
S & F 8 mm thick sheet glass , ordinary quality and glazed with oil putty in square n. exc 2 Sqm in each pane fixed complete all as specified and directed.
12
-
-
S & F stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.
45
-
-
S & F in repair stainless steel wire cloth 0.36mm normal dia of wire and average with a apparture 1.40mm and fixed with tinned tacksor stainless steel wire staples as specified and directed.
50
-
-
S&F in repair Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire tinned tacks or galvanized wire staple, steel windows including removal of wire cloth from existing steel windows, providing new wire cloth and fixed with screws or rivets and provision of new flat iron beads of size 12 x 5 mm complete all as spd and directed. Note – (Removal of steel window incl refixing in the same location where necessary will also included in quoted rate)
80
-
-
Providing services on related to welding & black smith work for reapir to steel windows, shutters , grills , doors , rolling shutters, and other steel works etc including taking down, easing and refixing in the same position as required etc complete all as specified and directed.
Note- (1).The above task shall be carried out by deploying minimum 01 welder having black smith skills on day basis From 900 hrs to 1700 Hrs. (2) In case contractor fails to complete the above task as per scheduled programme a recovery of Rs 500/- per day shall be deducted from his payment. (3) Necessary T&P, ladders,minor consumable viz welding rods/extras, welding machine , equipments and safety gear shall be provided by the contractors. (4) All replacement material/ accessories/Items as required shall be issued from MES store to complete the task and dismantled old unserviceable material shall be deposited to MES store yard. (5) The above work /task will also include for High rise bldgs and shaft area of high rise bldgs. .
30
-
-
M&L for Coloured Glazed ceramic tiles/ vitrified tiles/non skid tile in floor / wall dado/ skirting , reapir in patches , area n. exc 5 sq.m. including taking down and removing and cleaning old tiles, preparing beds and laying or setting, jointing with matching new tiles with existing tiles over backing coat of 10mm thick rendering CM/ (1:4) 15mm thick screed bed in CM 1:6 as approved by Engr-in- Charge, complete all as specified and directed.
30
-
-
S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in- charge. etc complete all as directed.
50
-
-
M&L Framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of watertanks and similar work .
200
-
-
S & F magnetic catches for cupboard , shelves, etc
20
-
-
S & F 50 mm size cup board locks of brass including keys set,Locks, cupboard, grade I, size 50 mm - 2 lever complete all as specified and as directed.
20
-
-
S & F for stainless steel 125mm long cupoard handles fixed with nut, screw and washer of stainless steel, complete all as specified and as directed.
40
-
-
S & F in repairs stainless steel Curtain Rod 25 mm dia with finials and bracket etc in required size for doors and windows openning complete all as specified and as directed.
300
-
-
S&F in repair aluminium door seal brown/white coated with PVC brush or PVC flexible door rubber fitted in bottom of door complete all as specified and directed
100
-
-
S & F Aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed
5
-
-
M & L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 and including demolition of old brick/ PCC block masonry complete all as specified and directed.
2
-
-
Taking down cement or cement lime plaster of any description on brick or stone walls and concrete surface of ceiling etc including raking out joints hacking for key scrubbing down with water etc complete all as specified and directed.
250
-
-
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and fair complete all as specified and directed by Engr-in-Charge.
250
-
-
M & L Rendering 5 mm thick on fair faces of concrete or concrete surface in ceiling in CM 1:3, finished even and fair complete all as specified and directed by Engr -in Charge.
50
-
-
Demolition of cement concrete any description and any position not otherwise specifically provided for complete all as specified and as directed.
10
-
-
M&L for 15mm thick plastering/rendering on brick work on concrete surfaces in cement mortar (1:3) mixed with liquid water proofing compound as per manufaturer's instructions finishing surfaces even and fair complete all as specified and directed. (liquid water proofing compound shall be measured and paid sepretaely).
50
-
-
Supply only liquid water proofing compound complete all as specified & directed.
2
-
-
M&L sunkern floor treatment including prepration of concrete/plaster surfaces .and applying the following treatment complete all as specified . (a) Applying 1st course of bitumenous primer @ 0.4 kg/sqm conforming to IS-3384 over roof concrete surface .
(b )Applying 2nd course of a coat of bonding material with blown type bitumen of grade 85/25 heating to working temperature of 180° C and applied @ 1.2 kg/sqm.
(c ) Applying 3rd course of APP (Atactic Polypropylene) modified polymeric 3mm thick weight not less than 3.6 kg/sqm with 160 Grams/sqm non woven polyster made at center core reinforced laid with 150 mm on the width side overlap and 100 mm on long side overlap as per manufacturer instructions . The membrane has to be laid with LPG torch and overlap sealed and finished neat (d) Applying 4th course of a coat of bonding material with blown type bitumen of grade 85/25 heating to a working temperature of 180° C and applied @ 1.2 kg/sqm .
50
-
-
M L for PCC 1:5:10 (40 mm graded Aggregate) as in sunkern floor , fdn, mass concrete etc allas specified and directed
10
-
-
M & L 25 mm Thick PCC type B-0 1:2:4 (12.5mm graded aggregate) as in flooring, under Tiles and etc including dismantling old existing any type PCC etc all as specified and directed
50
-
-
M & L Vitrified ceramic tiles (double charge) size 600 x 600 x 8 -10mm thick (square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 15 mm thick avg screed bed in CM 1:6 in floor and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge
140
-
-
M & L Vitrified ceramic tiles (double charge) size 600 x 600 x 8 -10mm thick (square/rectangular), ( shade/ colour/ Design/ pattern as approved by GE) ,as in skirting , dado , vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles laid over and including 10 mm thick rendering in CM 1:4 etc and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge
15
-
-
M & L Coloured non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) size 395 x 395 mm / 400 x 400 mm , in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match laid over and including 15 mm thick avg screed bed in CM 1:6 etc and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge
50
-
-
M & L Coloured Glazed ceramic tiles size 600 x 300 x 7-8 mm thick, in vertical surface such as skirting, dados , etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match and over and including 10 mm thick rendering in CM 1:4 and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge
200
-
-
M & L for 18 to 20 mm thick granite (of any type) work( table rubbed and polished) in jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab over and including 15 mm thick screed bed in CM 1:4 including rounding to edge of granite as per required and after dismantling of existing granite of any description including cement mortar bedding (but not backing ) and rubbish off the premises complete all as specified and directed.
20
-
-
M&L for vitrified Ceramic tiles, full body/double charged, 8 to 10 mm thick ( shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm X 1200mm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick rendering in cement mortar (1:6) and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge
100
-
-
M&L for vitrified Ceramic tiles, full body/double charged, 8 to 10 mm thick ( shade/ colour/ Design/ pattern as approved by GE) polished /matt finished size 600mm X 1200mm as in skirting/dado/vertical surface etc laid on 10mm thick cement plaster in CM (1:4) , set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade of tiles and after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and dirtected by Engr-in-Charge
45
-
-
S & F Rotational moulded polyethylene water storage tanks 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position with 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
5
-
-
S & F Rotational moulded polyethylene water storage tanks 1000 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position with 20 mm dia PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed including taking out existing unserviceable overhead tank of any description complete.
5
-
-
S&F steel water tubing galvanised 15mm bore medium grade fixed to walls, under floors and on ceiling surfaces , including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old steel tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed.
180
-
-
S&F steel water tubing galvanised 20 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.(Note : Pipe work executed in saft area and roof top upto the 10 story building also )
50
-
-
S&F 20 mm bore CPVC pipe SDR 11 plain including plain CPVC SDR 11 fittings such as tee, elbow, socket, union etc. ISI marked and fixed complete to walls and ceiling or laid in floors/roofs, including cutting chases , pipning in making good to facings where required and pointing in Cement mortar 1:3 for concealed water tubing or conduit pipe etc and including taking up or down old any type tubing 15 mm bore and connecetions in any postion etc complete all as specified and directed. complete all as specified and as directed.
100
-
-
S&F steel water tubing galvanised 25 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed(Note : Pipe work executed in saft area and roof top upto the 10 story building also )
100
-
-
S&F steel water tubing galvanised 32 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.(Note : Pipe work executed in saft area and roof top upto the 10 story building also )
100
-
-
S&F steel water tubing galvanised 50 mm bore medium grade fixed to walls, under floors and on ceiling surfaces and including taking up or down old steel tubing 20 mm bore and connecetions in any postion etc complete all as specified and directed.(Note : Pipe work executed in saft area and roof top upto the 10 story building also )
100
-
-
S & F in repair 20 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed
5
-
-
S & F in repair 25 mm bore Gun metal, globe or gate valves, with iron wheel head / leaver arm, screwed both ends for iron pipe and fixed
10
-
-
S&F in reapir of 50 mm bore dia of Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe, complete all as specified and as directed.
10
-
-
S&F in repairs of 20 mm bore Brass Float Valve high pressure rating fitted to GI tubing with epoxy coated aluminium rod & high-density plastic ball, screwed for iron pipe and fixed, complete all as specified and as directed.
20
-
-
S&F in repair 15mm quarter turn brass angle valves, chromium plated cast copper alloy, polished body screwed down, high pressure,suitable for 15mm bore steel tubing complete all as specified & directed. (Make: Jaquar/Marc/Kohler)
200
-
-
S & F in repair 15 mm bore bib tap (long body) ,fancy type chromimum plated screwed down high pressure with crutch/ butterfly handle/quarter turn handle etc suitable for 15mm bore steel tubing complete all as specifed and directed. (Make: Jaquar/Marc/Kohler)
50
-
-
S & F in repair 15 mm bore bib tap chromimum plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions etc complete all as specifed and directed. (Make: Jaquar/Marc/Kohler)
30
-
-
S&F in repair Brass CP Basin mixer central hole for making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. (Make : Jaquar Continental CON-CHR-167KNB or equivalent in Marc/Kohler)
50
-
-
S&F in repair brass chromium plated wall mixture 3 in 1 system with L- bend provision for over head shower and suitable for 15mm bore GI pipe including three joints to steel pipes or unions and plugging and screwing to walls all as specified and directed. Make : Jaquar Continental CON-CHR-273KNUPR and equivalent in Marc/Kohler)
35
-
-
S & F in repair 15 mm bore two way bib cock with wall flange cast copper alloy , fancy type , chromium plated, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make : Jaqaur Cat Part No. ARI-39041 and equivalent in Marc/Kohler)
50
-
-
S & F in repair 65 x 95 mm rectangular shape single flow hand shower ( body & face plate stainless with ABS body in chrome finish) with rubit cleaning system including flexible pipe and fixed complete all as specified and as directed. (Make : Jaquar cat part No HSH CHR 1657 and equivalent in Marc/Kohler)
35
-
-
S&F in repair Brass CP sink mixer with swinging spout (wall mounted model with connecting legs & wall flangesfor making hot and cold water fixed as per manufacturers manual with long shunk and cup washers, screwed both ends suitable for 15mm bore GI Pipe joints to GI pipes or unions, complete all as specified and directed. Make : Jaquar Continental CON-CHR-309 KNM or equivalent in Marc/Kohler)
30
-
-
S & F in reapir CP shower rose fancy type 150 mm x 150mm size with 300 / 600 mm long shower arm, fixed in repair to 15mm bore pipe, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
100
-
-
S&F in repairs Hand Shower (Health Faucet) with 8 mm Dia, 1 Meter Long Flexible Tube & Wall Hook completed all as specified Make : Jaquar Cat part No. ALD-CHR-573 and equivalent in jaquar / Hindware/Parryware or equivalent Marc/Kohler)
200
-
-
S & F in repairs Sheet glass corner shelf assembly consisting of 5.5mm thick sheet glass Min size 300 mm x 300 mm with chromium plated bracket guard and railing complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
300
-
-
S & F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 45 cm long complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
150
-
-
S & F in repair Towel Ring Round with Round Flange fixed in positon with and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. Make : Jaquar Cat part No. ACN-CHR-1121BN and equivalent in jaquar / Hindware/Parryware or equivalent in Marc/Kohler)
100
-
-
S & F in repair Toilet paper Roll Holder with Stainless Steel Flap, and including chromium plated brass screws and wooden/plastic cleats, complete all as specified and as directed. Make : Jaquar Cat part No. ACN-CHR-1153Sand equivalent in jaquar / Hindware/ Parryware or equivalent in Marc/Kohler)
60
-
-
S & F Designer type high quality fancy type looking mirror of size as approved by Engr-in-Charge 8-10mm thick, fixed to wall with stainless steel studs, screws, brackets and washers etc complete all as specified and as directed.
20
-
-
S&F in repairs of CP towel rail 600mm long fixed with and including chromium plated brass screws and and wooden/plastic cleats (minimum weight 190 gms) fixed on walls, complete all as specified. (Make: Jaquar/Marc/Kohler)
100
-
-
S & F in repair SS soap dish, fixed in repairs, complete all as specified and as directed. (Make: Jaquar/Marc/Kohler)
50
-
-
S & F in repair PVC connections 15mm size with PTMT nuts of length 450mm.
100
-
-
S & F in repair PVC connections 15mm size with PTMT nuts of length 600 mm.
200
-
-
S & F in repair 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood or pvc / wooden frame etc and fixed to wooden plugs with chromium plated brass screws and cup washers.
50
-
-
S & F in repair Stainless steel Grating dome 110/125 mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.
100
-
-
S & F in repair Stainless steel Grating dome 75 mm dia with or without hole for waste pipe, fixed in repairs, complete all as specified and as directed.
50
-
-
S&F in repairs of 32mm brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, unions and cap and fixed, complete all as specified and directed.
20
-
-
S & F in repair 32 mm dia brass waste coupling for any type WHB etc completed and specified
50
-
-
S & F in repair 40 mm dia brass waste coupling for any type Sink etc completed and specified
50
-
-
S & F 32/40mm spring type PVC waste pipe fixed toWHB and sink (Note minimum length of each pipe should not be less than 0.80RM), fixed in repairs, complete all as specified and as directed.
200
-
-
S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory
with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm
10
-
-
S&F in repair sinks with drainage board made of stainless steel lmm thick
kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm ®
30
-
-
S & F in reapir stainless steel kitchen plate rack minimum size 900 mm x 750 mm x 200 mm including fixing on wallmounted etc
30
-
-
S & F in repair full pedestal pattern wash hand basin with pedestal , size of basin 58 × 43.5 × 82.5 cm as approved by GE including brakets , chromium plated brass waste coupling , waste pipe etc complete all as specified and as directed. Make : HindwareTango Full Pedestal Wash Basin Cat part No. 10086 or equivalent in jaquar /Parryware)
20
-
-
S&F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to trap , and to flushing pipe antisyphonage pipe including trap set in and including concrete etc complete including making good to floor all as specified and dirtected by Engr-in-Charge.
5
-
-
S&F in repair Vitreous China wash basin, white, flat back, size 550 x 400 mm including , chain and plug but including brackets or erecting stand including & (32 mm -45 gms/40mm-60 gms ) waste coupling of CP complete all as specified and dirtected by Engr-in-Charge .
10
-
-
S & F in repair Vitreous China wash down pedestal pattern EWC, white and including with PVC (SWR) ' S' Trap/P-trap , including seat cover with connection to drain and to flushing pipe antisyphonage pipe, and making good to floor complete all as specified and directed.
30
-
-
S & F in repairs Vitreous china single Piece WC With PP Soft Close Seat Cover, Hinges, with cistern & Dual Flush Cistern Fitting, Fixing Accessories and Accessories Set, Size: 360x730x740 mm, S Trap- 300 mm including connecetion to drain pipe with all fitting and fixture complete all as specified and as directed. Make & Cat Part : Jaquar-Cat No. SLS-WHT-6851S300PP or equivalent in Marc / Kohler )
5
-
-
S & F in reapir Vitreous china wash basin counter oval type size 600x425x195mm, under granite slab with all fitting and fixture complete all as specified and as directed. (Make : Jaquar / Hindware/Parryware/cera)
5
-
-
S & F in repairs ready made wall / floor mounted Vanity box with Wash hand basin , base made of HDHMR board, both side laminated and front side melamine surface , Size of Vanity box 22 inch upto 26 inch including Wash hand basin with brass waste coupling. ( Design, colour and patern as approved by GE) Make : Hindware or as approved by GE)
2
-
-
S & F in repairs ready made wall / floor mounted Vanity box with Wash hand basin , base made of HDHMR board, both side laminated and front side melamine surface , Size of Vanity box 32 inch upto 36 inch including Wash hand basin with brass waste coupling. ( Design, colour and patern as approved by GE) Make : Hindware or as approved by GE)
1
-
-
S&F in repair Plastic water closet seat cover, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
155
-
-
S&F in repair 10 Ltrs capacity PVC valveless symphonic action type flushing cistern white low level with inlet, ball valve float handle including bracket etc complete all as specified and directed
60
-
-
S & F in repair flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed.
60
-
-
S&F in repair flushing cistern valveless symphonic action kit set for 10 Ltrs capacity etc complete all as specified and directed
100
-
-
S&F in repairs of Brass spindle (number 1 to 6) suitable for 15mm bib cock/stop cock/concealed stop cock/angle cock/ mixers, complete all as specified and directed.
350
-
-
M & L including T&P for Cleaning of existing water tanks (any type and any capacity) on top of multistoried buildings (G+8 Levels), including emptying the water tank completely(depth of water tank up to 3.00 M), cleaning the internal wall surfaces and bottom surface of tank to remove all disputation/fungus,other micro-organisms etc. Using light hammer & wire brushes, taking out and removing sediment loose dirt/mud sludge,vegetation and other foreign materials completely from the internal and external surface of tank disposal of all the waste/spoil outside from the MoD land . And washing repeatedly with acid based material, corrosion inhibitors and dispersing agents solution inside surfaces of tank with water and washing with clean water thoroughly and preparation of the surface to review new plaster complete all specified and directed by Engineer-in-charge.
200
-
-
Cleaning of PVC water tanks (500 Ltrs capacity) including on top of multistoried buildings (G+8 Levels), including emptying the water tank completely, cleaning the internal wall surfaces and bottom of tank by scraping with steel wire brushes, removing all dirt and scaling inside the tank and washing clean of all loose debris, complete all as specified and to the entire satisfaction of Engr-in-Charge.
20
-
-
Cleaning of PVC water tanks (1000 Ltrs capacity) , including emptying the water tank completely, cleaning the internal wall surfaces and bottom of tank by scraping with steel wire brushes, removing all dirt and scaling inside the tank and washing clean of all loose debris, complete all as specified and to the entire satisfaction of Engr-in-Charge.
20
-
-
S & F in repair 100 /110 mm dia PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)
10
-
-
S & F in repair 75 mm bore PVC floor trap , with SS grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)
10
-
-
S & F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floor or in wall completed all as specified and directed (Note : Pipe work executed in saft area upto the 10 story building also )
100
-
-
S & F in repair 110 mm bore PVC (SWR) bends with acess door completed all as specified and directed
20
-
-
S & F in repair 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door completed all as specified and directed
20
-
-
S & F in reapir 110 mm bore bore PVC cowls
20
-
-
S&F repair 75 mm bore PVC (SWR) pipes single socketed , in any length with rubber ring joints ,laid in trenches or in floor or in wall complete all as specifed and directed.
50
-
-
S & F in repair 75 mm bore PVC (SWR) bends with acess door completed all as specified and directed
10
-
-
S & F in repair 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door completed all as specified and directed
10
-
-
S & F in reapir 75 mm bore PVC cowls
10
-
-
S & F in repair Sand cast iron soil waste and vent pipes 100mm bore, in any length, with cement joints, laid in trenches/floors, fixed to walls/floors with CI/MS clamps and conforming to IS-1729, complete all as specified and as directed. NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffolding/jullha etcas required is included in Quoted rates.
60
-
-
S&F in repair Sand cast iron soil waste and vent pipes75 mm dia, in any length, with cement joints, laid in trenches/floors, fixed to walls/floors with CI/MS clamps and conforming to IS-1729, complete all as specified and as directed. NOTE:-The work will be also executed at Highrise bldgs and necessary T&P, scaffoling/jullha etcas required is included in Quoted rates.
30
-
-
S&F in repair CI bend for 100mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.
10
-
-
S&F in repair CI bend for 75mm bore any radius, diminishing pieces or tapers (larger bore measured), fixed to walls, complete all as specified and as directed.
10
-
-
S&F in repair 75mm bore CI Branch pieces with access door tee/Y etc , single (equal or unequal ), ordinary or inverted ) (spigot or socket type ) or with parallel branches complete all as specified & directed.
10
-
-
S&F in repair 100mm bore CI Branch pieces with access door tee/ Y etc , single (equal or unequal ), ordinary or inverted ) (spigot or socket type ) or with parallel branches complete all as specified & directed.
10
-
-
M & L for complete removal of existing treatment including preparation of old decorated internal surfaces of walls, pillers, cornices, ceiling etc by scrapping down smoke soot, moulds, moss, efflorescent salts , trading oil and greasy spots and including cracks/holes in surface filling with white putty and applying a layer of avg 2 mm thick wall care putty, again sand papering thus making surface even & smooth and applying two coat of distempering with 1st quality acrylic distemper (ready mixed) (interior) of approved manufacturer of required shade and colour over a coat of interior primer using roller brush complete.
3000
-
-
M & L for preparation of old decorated brick/concrete /plastered/un-plastered surfaces of walls, pillers, cornices, ceiling etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty and one coat of distempering with 1st quality acrylic distemper (ready mixed) (interior) of approved manufacturer of required shade and colour using roller brush etc complete.
6000
-
-
M & L for preparation of old decorated brick/concrete /plastered/un-plastered surfaces of walls, pillers, cornices, ceiling etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty and one coat of oil bound distemper, using roller brush of approved manufacturer of required shade and colour etc complete.
1000
-
-
M & L for 2 mm avg thickness water proof wall care putty on new / old any type of surface of wall/ ceiling including sand papering thus making surface even & smooth etc and prepare to receive further treatment etc, complete all as specified and directed.
250
-
-
M & L for two coat of distempering with 1st quality acrylic distemper (ready mixed) (interior) of approved manufacturer, of required shade and colour including over a coat of primer of newly prepared surface of walls, pillers, cornices, ceiling platered/ unplastered , cement concrete etc complete.
250
-
-
M & L for two coat of white wash applying on and including prepration of any type of old/new surface of walls, pillers, cornices, ceiling , platered/ unplastered ,cement concrete etc complete.
1000
-
-
M & L for applying one coat of synthetic enamel paint including preparation of old wooden surfaces of any description over 10 cm width or girth and complete.
1000
-
-
M & L for applying one coat of synthetic enamel paint including preparation of old steel surfaces of any description over 10 cm width or girth and complete.
250
-
-
M&L two coat of synthetic enamel paint (finishing coat) over one coat of primer to new steel surfaces of any description over 10 cm width or girth incl prepration of surfaces complete.
10
-
-
M&L for applying Two coat of synthetic enamel paint (finishing coat) over one coat of pink primer to new wood surfaces of any description over 10 cm width or girth incl prepration of surfaces complete.
100
-
-
M & L for preparation of old/New decorated brick/concrete /plastered/un-plastered surfaces of walls, pillers, cornices, ceiling , soffits, landing area , staire case , bottom of slab etc by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots including cracks/holes in surface filling with white putty and two coat of oil bound distemper, using roller brush of approved manufacturer, of required shade and colour , as per manufacturer's specification etc complete all as specified and directed. Note : (1) Work will be carried out in common area , stair case , balcony, passage area , parking area , terrace area etc in multistory building (G+9) and as directed by Engr-in charge (2) Rate quoted up to G+9 floor bldg including scaffolding , ladders etc as required
5800
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%